| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* Copyright (c) 2017 The Linux Foundation. All rights reserved. */ |
| |
| #ifndef _A6XX_GMU_H_ |
| #define _A6XX_GMU_H_ |
| |
| #include <linux/completion.h> |
| #include <linux/iopoll.h> |
| #include <linux/interrupt.h> |
| #include <linux/notifier.h> |
| #include <linux/soc/qcom/qcom_aoss.h> |
| #include "msm_drv.h" |
| #include "a6xx_hfi.h" |
| |
| struct a6xx_gmu_bo { |
| struct drm_gem_object *obj; |
| void *virt; |
| size_t size; |
| u64 iova; |
| }; |
| |
| /* |
| * These define the different GMU wake up options - these define how both the |
| * CPU and the GMU bring up the hardware |
| */ |
| |
| /* THe GMU has already been booted and the rentention registers are active */ |
| #define GMU_WARM_BOOT 0 |
| |
| /* the GMU is coming up for the first time or back from a power collapse */ |
| #define GMU_COLD_BOOT 1 |
| |
| /* |
| * These define the level of control that the GMU has - the higher the number |
| * the more things that the GMU hardware controls on its own. |
| */ |
| |
| /* The GMU does not do any idle state management */ |
| #define GMU_IDLE_STATE_ACTIVE 0 |
| |
| /* The GMU manages SPTP power collapse */ |
| #define GMU_IDLE_STATE_SPTP 2 |
| |
| /* The GMU does automatic IFPC (intra-frame power collapse) */ |
| #define GMU_IDLE_STATE_IFPC 3 |
| |
| struct a6xx_gmu { |
| struct device *dev; |
| |
| /* For serializing communication with the GMU: */ |
| struct mutex lock; |
| |
| struct msm_gem_address_space *aspace; |
| |
| void __iomem *mmio; |
| void __iomem *rscc; |
| |
| int hfi_irq; |
| int gmu_irq; |
| |
| struct device *gxpd; |
| struct device *cxpd; |
| |
| int idle_level; |
| |
| struct a6xx_gmu_bo hfi; |
| struct a6xx_gmu_bo debug; |
| struct a6xx_gmu_bo icache; |
| struct a6xx_gmu_bo dcache; |
| struct a6xx_gmu_bo dummy; |
| struct a6xx_gmu_bo log; |
| |
| int nr_clocks; |
| struct clk_bulk_data *clocks; |
| struct clk *core_clk; |
| struct clk *hub_clk; |
| |
| /* current performance index set externally */ |
| int current_perf_index; |
| |
| int nr_gpu_freqs; |
| unsigned long gpu_freqs[16]; |
| u32 gx_arc_votes[16]; |
| |
| int nr_gmu_freqs; |
| unsigned long gmu_freqs[4]; |
| u32 cx_arc_votes[4]; |
| |
| unsigned long freq; |
| |
| struct a6xx_hfi_queue queues[2]; |
| |
| bool initialized; |
| bool hung; |
| bool legacy; /* a618 or a630 */ |
| |
| /* For power domain callback */ |
| struct notifier_block pd_nb; |
| struct completion pd_gate; |
| |
| struct qmp *qmp; |
| }; |
| |
| static inline u32 gmu_read(struct a6xx_gmu *gmu, u32 offset) |
| { |
| return readl(gmu->mmio + (offset << 2)); |
| } |
| |
| static inline void gmu_write(struct a6xx_gmu *gmu, u32 offset, u32 value) |
| { |
| writel(value, gmu->mmio + (offset << 2)); |
| } |
| |
| static inline void |
| gmu_write_bulk(struct a6xx_gmu *gmu, u32 offset, const u32 *data, u32 size) |
| { |
| memcpy_toio(gmu->mmio + (offset << 2), data, size); |
| wmb(); |
| } |
| |
| static inline void gmu_rmw(struct a6xx_gmu *gmu, u32 reg, u32 mask, u32 or) |
| { |
| u32 val = gmu_read(gmu, reg); |
| |
| val &= ~mask; |
| |
| gmu_write(gmu, reg, val | or); |
| } |
| |
| static inline u64 gmu_read64(struct a6xx_gmu *gmu, u32 lo, u32 hi) |
| { |
| u64 val; |
| |
| val = (u64) readl(gmu->mmio + (lo << 2)); |
| val |= ((u64) readl(gmu->mmio + (hi << 2)) << 32); |
| |
| return val; |
| } |
| |
| #define gmu_poll_timeout(gmu, addr, val, cond, interval, timeout) \ |
| readl_poll_timeout((gmu)->mmio + ((addr) << 2), val, cond, \ |
| interval, timeout) |
| |
| static inline u32 gmu_read_rscc(struct a6xx_gmu *gmu, u32 offset) |
| { |
| return readl(gmu->rscc + (offset << 2)); |
| } |
| |
| static inline void gmu_write_rscc(struct a6xx_gmu *gmu, u32 offset, u32 value) |
| { |
| writel(value, gmu->rscc + (offset << 2)); |
| } |
| |
| #define gmu_poll_timeout_rscc(gmu, addr, val, cond, interval, timeout) \ |
| readl_poll_timeout((gmu)->rscc + ((addr) << 2), val, cond, \ |
| interval, timeout) |
| |
| /* |
| * These are the available OOB (out of band requests) to the GMU where "out of |
| * band" means that the CPU talks to the GMU directly and not through HFI. |
| * Normally this works by writing a ITCM/DTCM register and then triggering a |
| * interrupt (the "request" bit) and waiting for an acknowledgment (the "ack" |
| * bit). The state is cleared by writing the "clear' bit to the GMU interrupt. |
| * |
| * These are used to force the GMU/GPU to stay on during a critical sequence or |
| * for hardware workarounds. |
| */ |
| |
| enum a6xx_gmu_oob_state { |
| /* |
| * Let the GMU know that a boot or slumber operation has started. The value in |
| * REG_A6XX_GMU_BOOT_SLUMBER_OPTION lets the GMU know which operation we are |
| * doing |
| */ |
| GMU_OOB_BOOT_SLUMBER = 0, |
| /* |
| * Let the GMU know to not turn off any GPU registers while the CPU is in a |
| * critical section |
| */ |
| GMU_OOB_GPU_SET, |
| /* |
| * Set a new power level for the GPU when the CPU is doing frequency scaling |
| */ |
| GMU_OOB_DCVS_SET, |
| /* |
| * Used to keep the GPU on for CPU-side reads of performance counters. |
| */ |
| GMU_OOB_PERFCOUNTER_SET, |
| }; |
| |
| void a6xx_hfi_init(struct a6xx_gmu *gmu); |
| int a6xx_hfi_start(struct a6xx_gmu *gmu, int boot_state); |
| void a6xx_hfi_stop(struct a6xx_gmu *gmu); |
| int a6xx_hfi_send_prep_slumber(struct a6xx_gmu *gmu); |
| int a6xx_hfi_set_freq(struct a6xx_gmu *gmu, int index); |
| |
| bool a6xx_gmu_gx_is_on(struct a6xx_gmu *gmu); |
| bool a6xx_gmu_sptprac_is_on(struct a6xx_gmu *gmu); |
| void a6xx_sptprac_disable(struct a6xx_gmu *gmu); |
| int a6xx_sptprac_enable(struct a6xx_gmu *gmu); |
| |
| #endif |