| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2024 BayLibre, SAS |
| * Author: Jerome Brunet <jbrunet@baylibre.com> |
| */ |
| |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_device.h> |
| #include <drm/drm_probe_helper.h> |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| |
| struct lincoln_lcd197_panel { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi; |
| struct regulator *supply; |
| struct gpio_desc *enable_gpio; |
| struct gpio_desc *reset_gpio; |
| }; |
| |
| static inline |
| struct lincoln_lcd197_panel *to_lincoln_lcd197_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct lincoln_lcd197_panel, panel); |
| } |
| |
| static int lincoln_lcd197_panel_prepare(struct drm_panel *panel) |
| { |
| struct lincoln_lcd197_panel *lcd = to_lincoln_lcd197_panel(panel); |
| struct mipi_dsi_multi_context ctx = { .dsi = lcd->dsi }; |
| int err; |
| |
| gpiod_set_value_cansleep(lcd->enable_gpio, 0); |
| err = regulator_enable(lcd->supply); |
| if (err < 0) |
| return err; |
| |
| gpiod_set_value_cansleep(lcd->enable_gpio, 1); |
| usleep_range(1000, 2000); |
| gpiod_set_value_cansleep(lcd->reset_gpio, 1); |
| usleep_range(5000, 6000); |
| gpiod_set_value_cansleep(lcd->reset_gpio, 0); |
| msleep(50); |
| |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb9, 0xff, 0x83, 0x99); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xd2, 0x55); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb1, 0x02, 0x04, 0x70, 0x90, 0x01, |
| 0x32, 0x33, 0x11, 0x11, 0x4d, 0x57, 0x56, 0x73, |
| 0x02, 0x02); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb2, 0x00, 0x80, 0x80, 0xae, 0x0a, |
| 0x0e, 0x75, 0x11, 0x00, 0x00, 0x00); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb4, 0x00, 0xff, 0x04, 0xa4, 0x02, |
| 0xa0, 0x00, 0x00, 0x10, 0x00, 0x00, 0x02, 0x00, |
| 0x24, 0x02, 0x04, 0x0a, 0x21, 0x03, 0x00, 0x00, |
| 0x08, 0xa6, 0x88, 0x04, 0xa4, 0x02, 0xa0, 0x00, |
| 0x00, 0x10, 0x00, 0x00, 0x02, 0x00, 0x24, 0x02, |
| 0x04, 0x0a, 0x00, 0x00, 0x08, 0xa6, 0x00, 0x08, |
| 0x11); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xd3, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x18, 0x18, 0x32, 0x10, 0x09, 0x00, 0x09, |
| 0x32, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, |
| 0x00, 0x00, 0x11, 0x00, 0x02, 0x02, 0x03, 0x00, |
| 0x00, 0x00, 0x0a, 0x40); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xd5, 0x18, 0x18, 0x18, 0x18, 0x21, |
| 0x20, 0x18, 0x18, 0x19, 0x19, 0x19, 0x19, 0x18, |
| 0x18, 0x18, 0x18, 0x03, 0x02, 0x01, 0x00, 0x2f, |
| 0x2f, 0x30, 0x30, 0x31, 0x31, 0x18, 0x18, 0x18, |
| 0x18, 0x18, 0x18); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xd6, 0x18, 0x18, 0x18, 0x18, 0x20, |
| 0x21, 0x19, 0x19, 0x18, 0x18, 0x19, 0x19, 0x18, |
| 0x18, 0x18, 0x18, 0x00, 0x01, 0x02, 0x03, 0x2f, |
| 0x2f, 0x30, 0x30, 0x31, 0x31, 0x18, 0x18, 0x18, |
| 0x18, 0x18, 0x18); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xbd, 0x01); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xd8, 0x0a, 0xbe, 0xfa, 0xa0, 0x0a, |
| 0xbe, 0xfa, 0xa0); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xd8, 0x0f, 0xff, 0xff, 0xe0, 0x0f, |
| 0xff, 0xff, 0xe0); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xbd, 0x02); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xd8, 0x0f, 0xff, 0xff, 0xe0, 0x0f, |
| 0xff, 0xff, 0xe0); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xe0, 0x01, 0x11, 0x1c, 0x17, 0x39, |
| 0x43, 0x54, 0x51, 0x5a, 0x64, 0x6c, 0x74, 0x7a, |
| 0x83, 0x8d, 0x92, 0x99, 0xa4, 0xa9, 0xb4, 0xaa, |
| 0xba, 0xbe, 0x63, 0x5e, 0x69, 0x73, 0x01, 0x11, |
| 0x1c, 0x17, 0x39, 0x43, 0x54, 0x51, 0x5a, 0x64, |
| 0x6c, 0x74, 0x7a, 0x83, 0x8d, 0x92, 0x99, 0xa4, |
| 0xa7, 0xb2, 0xa9, 0xba, 0xbe, 0x63, 0x5e, 0x69, |
| 0x73); |
| mipi_dsi_usleep_range(&ctx, 200, 300); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xb6, 0x92, 0x92); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xcc, 0x00); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xbf, 0x40, 0x41, 0x50, 0x49); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xc6, 0xff, 0xf9); |
| mipi_dsi_dcs_write_seq_multi(&ctx, 0xc0, 0x25, 0x5a); |
| mipi_dsi_dcs_write_seq_multi(&ctx, MIPI_DCS_SET_ADDRESS_MODE, 0x02); |
| mipi_dsi_dcs_exit_sleep_mode_multi(&ctx); |
| mipi_dsi_msleep(&ctx, 120); |
| |
| if (ctx.accum_err) { |
| gpiod_set_value_cansleep(lcd->enable_gpio, 0); |
| gpiod_set_value_cansleep(lcd->reset_gpio, 1); |
| regulator_disable(lcd->supply); |
| } |
| |
| return ctx.accum_err; |
| } |
| |
| static int lincoln_lcd197_panel_unprepare(struct drm_panel *panel) |
| { |
| struct lincoln_lcd197_panel *lcd = to_lincoln_lcd197_panel(panel); |
| struct mipi_dsi_multi_context ctx = { .dsi = lcd->dsi }; |
| |
| mipi_dsi_dcs_enter_sleep_mode_multi(&ctx); |
| mipi_dsi_usleep_range(&ctx, 5000, 6000); |
| gpiod_set_value_cansleep(lcd->enable_gpio, 0); |
| gpiod_set_value_cansleep(lcd->reset_gpio, 1); |
| regulator_disable(lcd->supply); |
| |
| return ctx.accum_err; |
| } |
| |
| static int lincoln_lcd197_panel_enable(struct drm_panel *panel) |
| { |
| struct lincoln_lcd197_panel *lcd = to_lincoln_lcd197_panel(panel); |
| struct mipi_dsi_multi_context ctx = { .dsi = lcd->dsi }; |
| |
| mipi_dsi_dcs_set_display_on_multi(&ctx); |
| mipi_dsi_msleep(&ctx, 20); |
| |
| return ctx.accum_err; |
| } |
| |
| static int lincoln_lcd197_panel_disable(struct drm_panel *panel) |
| { |
| struct lincoln_lcd197_panel *lcd = to_lincoln_lcd197_panel(panel); |
| struct mipi_dsi_multi_context ctx = { .dsi = lcd->dsi }; |
| |
| mipi_dsi_dcs_set_display_off_multi(&ctx); |
| mipi_dsi_msleep(&ctx, 50); |
| |
| return ctx.accum_err; |
| } |
| |
| static const struct drm_display_mode lcd197_mode = { |
| .clock = 154002, |
| .hdisplay = 1080, |
| .hsync_start = 1080 + 20, |
| .hsync_end = 1080 + 20 + 6, |
| .htotal = 1080 + 204, |
| .vdisplay = 1920, |
| .vsync_start = 1920 + 4, |
| .vsync_end = 1920 + 4 + 4, |
| .vtotal = 1920 + 79, |
| .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, |
| .width_mm = 79, |
| .height_mm = 125, |
| .type = DRM_MODE_TYPE_DRIVER, |
| }; |
| |
| static int lincoln_lcd197_panel_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| return drm_connector_helper_get_modes_fixed(connector, &lcd197_mode); |
| } |
| |
| static const struct drm_panel_funcs lincoln_lcd197_panel_funcs = { |
| .prepare = lincoln_lcd197_panel_prepare, |
| .unprepare = lincoln_lcd197_panel_unprepare, |
| .enable = lincoln_lcd197_panel_enable, |
| .disable = lincoln_lcd197_panel_disable, |
| .get_modes = lincoln_lcd197_panel_get_modes, |
| }; |
| |
| static int lincoln_lcd197_panel_probe(struct mipi_dsi_device *dsi) |
| { |
| struct lincoln_lcd197_panel *lcd; |
| struct device *dev = &dsi->dev; |
| int err; |
| |
| dsi->lanes = 4; |
| dsi->format = MIPI_DSI_FMT_RGB888; |
| dsi->mode_flags = (MIPI_DSI_MODE_VIDEO | |
| MIPI_DSI_MODE_VIDEO_BURST); |
| |
| lcd = devm_kzalloc(&dsi->dev, sizeof(*lcd), GFP_KERNEL); |
| if (!lcd) |
| return -ENOMEM; |
| |
| mipi_dsi_set_drvdata(dsi, lcd); |
| lcd->dsi = dsi; |
| |
| lcd->supply = devm_regulator_get(dev, "power"); |
| if (IS_ERR(lcd->supply)) |
| return dev_err_probe(dev, PTR_ERR(lcd->supply), |
| "failed to get power supply"); |
| |
| lcd->enable_gpio = devm_gpiod_get(dev, "enable", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(lcd->enable_gpio)) |
| return dev_err_probe(dev, PTR_ERR(lcd->enable_gpio), |
| "failed to get enable gpio"); |
| |
| lcd->reset_gpio = devm_gpiod_get(dev, "reset", |
| GPIOD_OUT_HIGH); |
| if (IS_ERR(lcd->reset_gpio)) |
| return dev_err_probe(dev, PTR_ERR(lcd->reset_gpio), |
| "failed to get reset gpio"); |
| |
| drm_panel_init(&lcd->panel, dev, |
| &lincoln_lcd197_panel_funcs, DRM_MODE_CONNECTOR_DSI); |
| |
| err = drm_panel_of_backlight(&lcd->panel); |
| if (err) |
| return err; |
| |
| drm_panel_add(&lcd->panel); |
| err = mipi_dsi_attach(dsi); |
| if (err) |
| drm_panel_remove(&lcd->panel); |
| |
| return err; |
| } |
| |
| static void lincoln_lcd197_panel_remove(struct mipi_dsi_device *dsi) |
| { |
| struct lincoln_lcd197_panel *lcd = mipi_dsi_get_drvdata(dsi); |
| int err; |
| |
| err = mipi_dsi_detach(dsi); |
| if (err < 0) |
| dev_err(&dsi->dev, "failed to detach from DSI host: %d\n", err); |
| |
| drm_panel_remove(&lcd->panel); |
| } |
| |
| static const struct of_device_id lincoln_lcd197_of_match[] = { |
| { .compatible = "lincolntech,lcd197", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, lincoln_lcd197_of_match); |
| |
| static struct mipi_dsi_driver lincoln_lcd197_panel_driver = { |
| .driver = { |
| .name = "panel-lincolntech-lcd197", |
| .of_match_table = lincoln_lcd197_of_match, |
| }, |
| .probe = lincoln_lcd197_panel_probe, |
| .remove = lincoln_lcd197_panel_remove, |
| }; |
| module_mipi_dsi_driver(lincoln_lcd197_panel_driver); |
| |
| MODULE_AUTHOR("Jerome Brunet <jbrunet@baylibre.com>"); |
| MODULE_DESCRIPTION("Lincoln Technologies LCD197 panel driver"); |
| MODULE_LICENSE("GPL"); |