| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Generated with linux-mdss-dsi-panel-driver-generator from vendor device tree. |
| * Copyright (c) 2024 David Wronek <david@mainlining.org> |
| */ |
| |
| #include <linux/backlight.h> |
| #include <linux/delay.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_device.h> |
| #include <linux/of_graph.h> |
| #include <linux/regulator/consumer.h> |
| |
| #include <video/mipi_display.h> |
| |
| #include <drm/drm_mipi_dsi.h> |
| #include <drm/drm_modes.h> |
| #include <drm/drm_panel.h> |
| #include <drm/drm_probe_helper.h> |
| |
| struct rm69380_panel { |
| struct drm_panel panel; |
| struct mipi_dsi_device *dsi[2]; |
| struct regulator_bulk_data supplies[2]; |
| struct gpio_desc *reset_gpio; |
| }; |
| |
| static inline |
| struct rm69380_panel *to_rm69380_panel(struct drm_panel *panel) |
| { |
| return container_of(panel, struct rm69380_panel, panel); |
| } |
| |
| static void rm69380_reset(struct rm69380_panel *ctx) |
| { |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); |
| usleep_range(15000, 16000); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); |
| usleep_range(10000, 11000); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 0); |
| msleep(30); |
| } |
| |
| static int rm69380_on(struct rm69380_panel *ctx) |
| { |
| struct mipi_dsi_device *dsi = ctx->dsi[0]; |
| struct device *dev = &dsi->dev; |
| int ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| if (ctx->dsi[1]) |
| ctx->dsi[1]->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd4); |
| mipi_dsi_dcs_write_seq(dsi, 0x00, 0x80); |
| mipi_dsi_dcs_write_seq(dsi, 0xfe, 0xd0); |
| mipi_dsi_dcs_write_seq(dsi, 0x48, 0x00); |
| mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x26); |
| mipi_dsi_dcs_write_seq(dsi, 0x75, 0x3f); |
| mipi_dsi_dcs_write_seq(dsi, 0x1d, 0x1a); |
| mipi_dsi_dcs_write_seq(dsi, 0xfe, 0x00); |
| mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_CONTROL_DISPLAY, 0x28); |
| mipi_dsi_dcs_write_seq(dsi, 0xc2, 0x08); |
| |
| ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set tear on: %d\n", ret); |
| return ret; |
| } |
| |
| ret = mipi_dsi_dcs_exit_sleep_mode(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to exit sleep mode: %d\n", ret); |
| return ret; |
| } |
| msleep(20); |
| |
| ret = mipi_dsi_dcs_set_display_on(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set display on: %d\n", ret); |
| return ret; |
| } |
| msleep(36); |
| |
| return 0; |
| } |
| |
| static int rm69380_off(struct rm69380_panel *ctx) |
| { |
| struct mipi_dsi_device *dsi = ctx->dsi[0]; |
| struct device *dev = &dsi->dev; |
| int ret; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| if (ctx->dsi[1]) |
| ctx->dsi[1]->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_set_display_off(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to set display off: %d\n", ret); |
| return ret; |
| } |
| msleep(35); |
| |
| ret = mipi_dsi_dcs_enter_sleep_mode(dsi); |
| if (ret < 0) { |
| dev_err(dev, "Failed to enter sleep mode: %d\n", ret); |
| return ret; |
| } |
| msleep(20); |
| |
| return 0; |
| } |
| |
| static int rm69380_prepare(struct drm_panel *panel) |
| { |
| struct rm69380_panel *ctx = to_rm69380_panel(panel); |
| struct device *dev = &ctx->dsi[0]->dev; |
| int ret; |
| |
| ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| if (ret < 0) { |
| dev_err(dev, "Failed to enable regulators: %d\n", ret); |
| return ret; |
| } |
| |
| rm69380_reset(ctx); |
| |
| ret = rm69380_on(ctx); |
| if (ret < 0) { |
| dev_err(dev, "Failed to initialize panel: %d\n", ret); |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); |
| regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int rm69380_unprepare(struct drm_panel *panel) |
| { |
| struct rm69380_panel *ctx = to_rm69380_panel(panel); |
| struct device *dev = &ctx->dsi[0]->dev; |
| int ret; |
| |
| ret = rm69380_off(ctx); |
| if (ret < 0) |
| dev_err(dev, "Failed to un-initialize panel: %d\n", ret); |
| |
| gpiod_set_value_cansleep(ctx->reset_gpio, 1); |
| regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies); |
| |
| return 0; |
| } |
| |
| static const struct drm_display_mode rm69380_mode = { |
| .clock = (2560 + 32 + 12 + 38) * (1600 + 20 + 4 + 8) * 90 / 1000, |
| .hdisplay = 2560, |
| .hsync_start = 2560 + 32, |
| .hsync_end = 2560 + 32 + 12, |
| .htotal = 2560 + 32 + 12 + 38, |
| .vdisplay = 1600, |
| .vsync_start = 1600 + 20, |
| .vsync_end = 1600 + 20 + 4, |
| .vtotal = 1600 + 20 + 4 + 8, |
| .width_mm = 248, |
| .height_mm = 155, |
| .type = DRM_MODE_TYPE_DRIVER, |
| }; |
| |
| static int rm69380_get_modes(struct drm_panel *panel, |
| struct drm_connector *connector) |
| { |
| return drm_connector_helper_get_modes_fixed(connector, &rm69380_mode); |
| } |
| |
| static const struct drm_panel_funcs rm69380_panel_funcs = { |
| .prepare = rm69380_prepare, |
| .unprepare = rm69380_unprepare, |
| .get_modes = rm69380_get_modes, |
| }; |
| |
| static int rm69380_bl_update_status(struct backlight_device *bl) |
| { |
| struct mipi_dsi_device *dsi = bl_get_data(bl); |
| u16 brightness = backlight_get_brightness(bl); |
| int ret; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_set_display_brightness_large(dsi, brightness); |
| if (ret < 0) |
| return ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| return 0; |
| } |
| |
| static int rm69380_bl_get_brightness(struct backlight_device *bl) |
| { |
| struct mipi_dsi_device *dsi = bl_get_data(bl); |
| u16 brightness; |
| int ret; |
| |
| dsi->mode_flags &= ~MIPI_DSI_MODE_LPM; |
| |
| ret = mipi_dsi_dcs_get_display_brightness_large(dsi, &brightness); |
| if (ret < 0) |
| return ret; |
| |
| dsi->mode_flags |= MIPI_DSI_MODE_LPM; |
| |
| return brightness; |
| } |
| |
| static const struct backlight_ops rm69380_bl_ops = { |
| .update_status = rm69380_bl_update_status, |
| .get_brightness = rm69380_bl_get_brightness, |
| }; |
| |
| static struct backlight_device * |
| rm69380_create_backlight(struct mipi_dsi_device *dsi) |
| { |
| struct device *dev = &dsi->dev; |
| const struct backlight_properties props = { |
| .type = BACKLIGHT_RAW, |
| .brightness = 511, |
| .max_brightness = 2047, |
| }; |
| |
| return devm_backlight_device_register(dev, dev_name(dev), dev, dsi, |
| &rm69380_bl_ops, &props); |
| } |
| |
| static int rm69380_probe(struct mipi_dsi_device *dsi) |
| { |
| struct mipi_dsi_host *dsi_sec_host; |
| struct rm69380_panel *ctx; |
| struct device *dev = &dsi->dev; |
| struct device_node *dsi_sec; |
| int ret, i; |
| |
| ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL); |
| if (!ctx) |
| return -ENOMEM; |
| |
| ctx->supplies[0].supply = "vddio"; |
| ctx->supplies[1].supply = "avdd"; |
| ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies), |
| ctx->supplies); |
| if (ret < 0) |
| return dev_err_probe(dev, ret, "Failed to get regulators\n"); |
| |
| ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(ctx->reset_gpio)) |
| return dev_err_probe(dev, PTR_ERR(ctx->reset_gpio), |
| "Failed to get reset-gpios\n"); |
| |
| dsi_sec = of_graph_get_remote_node(dsi->dev.of_node, 1, -1); |
| |
| if (dsi_sec) { |
| const struct mipi_dsi_device_info info = { "RM69380 DSI1", 0, |
| dsi_sec }; |
| |
| dsi_sec_host = of_find_mipi_dsi_host_by_node(dsi_sec); |
| of_node_put(dsi_sec); |
| if (!dsi_sec_host) |
| return dev_err_probe(dev, -EPROBE_DEFER, |
| "Cannot get secondary DSI host\n"); |
| |
| ctx->dsi[1] = |
| devm_mipi_dsi_device_register_full(dev, dsi_sec_host, &info); |
| if (IS_ERR(ctx->dsi[1])) |
| return dev_err_probe(dev, PTR_ERR(ctx->dsi[1]), |
| "Cannot get secondary DSI node\n"); |
| |
| mipi_dsi_set_drvdata(ctx->dsi[1], ctx); |
| } |
| |
| ctx->dsi[0] = dsi; |
| mipi_dsi_set_drvdata(dsi, ctx); |
| |
| drm_panel_init(&ctx->panel, dev, &rm69380_panel_funcs, |
| DRM_MODE_CONNECTOR_DSI); |
| ctx->panel.prepare_prev_first = true; |
| |
| ctx->panel.backlight = rm69380_create_backlight(dsi); |
| if (IS_ERR(ctx->panel.backlight)) |
| return dev_err_probe(dev, PTR_ERR(ctx->panel.backlight), |
| "Failed to create backlight\n"); |
| |
| drm_panel_add(&ctx->panel); |
| |
| for (i = 0; i < ARRAY_SIZE(ctx->dsi); i++) { |
| if (!ctx->dsi[i]) |
| continue; |
| |
| dev_dbg(&ctx->dsi[i]->dev, "Binding DSI %d\n", i); |
| |
| ctx->dsi[i]->lanes = 4; |
| ctx->dsi[i]->format = MIPI_DSI_FMT_RGB888; |
| ctx->dsi[i]->mode_flags = MIPI_DSI_MODE_VIDEO_BURST | |
| MIPI_DSI_CLOCK_NON_CONTINUOUS; |
| |
| ret = devm_mipi_dsi_attach(dev, ctx->dsi[i]); |
| if (ret < 0) { |
| drm_panel_remove(&ctx->panel); |
| return dev_err_probe(dev, ret, |
| "Failed to attach to DSI%d\n", i); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void rm69380_remove(struct mipi_dsi_device *dsi) |
| { |
| struct rm69380_panel *ctx = mipi_dsi_get_drvdata(dsi); |
| |
| drm_panel_remove(&ctx->panel); |
| } |
| |
| static const struct of_device_id rm69380_of_match[] = { |
| { .compatible = "lenovo,j716f-edo-rm69380" }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, rm69380_of_match); |
| |
| static struct mipi_dsi_driver rm69380_panel_driver = { |
| .probe = rm69380_probe, |
| .remove = rm69380_remove, |
| .driver = { |
| .name = "panel-raydium-rm69380", |
| .of_match_table = rm69380_of_match, |
| }, |
| }; |
| module_mipi_dsi_driver(rm69380_panel_driver); |
| |
| MODULE_AUTHOR("David Wronek <david@mainlining.org"); |
| MODULE_DESCRIPTION("DRM driver for Raydium RM69380-equipped DSI panels"); |
| MODULE_LICENSE("GPL"); |