| /* SPDX-License-Identifier: MIT */ |
| /* |
| * Copyright © 2014-2021 Intel Corporation |
| */ |
| |
| #ifndef _ABI_GUC_ACTIONS_ABI_H |
| #define _ABI_GUC_ACTIONS_ABI_H |
| |
| /** |
| * DOC: HOST2GUC_SELF_CFG |
| * |
| * This message is used by Host KMD to setup of the `GuC Self Config KLVs`_. |
| * |
| * This message must be sent as `MMIO HXG Message`_. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_HOST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | DATA0 = MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`GUC_ACTION_HOST2GUC_SELF_CFG` = 0x0508 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:16 | **KLV_KEY** - KLV key, see `GuC Self Config KLVs`_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | **KLV_LEN** - KLV length | |
| * | | | | |
| * | | | - 32 bit KLV = 1 | |
| * | | | - 64 bit KLV = 2 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 2 | 31:0 | **VALUE32** - Bits 31-0 of the KLV value | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 3 | 31:0 | **VALUE64** - Bits 63-32 of the KLV value (**KLV_LEN** = 2) | |
| * +---+-------+--------------------------------------------------------------+ |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_GUC_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:0 | DATA0 = **NUM** - 1 if KLV was parsed, 0 if not recognized | |
| * +---+-------+--------------------------------------------------------------+ |
| */ |
| #define GUC_ACTION_HOST2GUC_SELF_CFG 0x0508 |
| |
| #define HOST2GUC_SELF_CFG_REQUEST_MSG_LEN (GUC_HXG_REQUEST_MSG_MIN_LEN + 3u) |
| #define HOST2GUC_SELF_CFG_REQUEST_MSG_0_MBZ GUC_HXG_REQUEST_MSG_0_DATA0 |
| #define HOST2GUC_SELF_CFG_REQUEST_MSG_1_KLV_KEY (0xffffu << 16) |
| #define HOST2GUC_SELF_CFG_REQUEST_MSG_1_KLV_LEN (0xffffu << 0) |
| #define HOST2GUC_SELF_CFG_REQUEST_MSG_2_VALUE32 GUC_HXG_REQUEST_MSG_n_DATAn |
| #define HOST2GUC_SELF_CFG_REQUEST_MSG_3_VALUE64 GUC_HXG_REQUEST_MSG_n_DATAn |
| |
| #define HOST2GUC_SELF_CFG_RESPONSE_MSG_LEN GUC_HXG_RESPONSE_MSG_MIN_LEN |
| #define HOST2GUC_SELF_CFG_RESPONSE_MSG_0_NUM GUC_HXG_RESPONSE_MSG_0_DATA0 |
| |
| /** |
| * DOC: HOST2GUC_CONTROL_CTB |
| * |
| * This H2G action allows Vf Host to enable or disable H2G and G2H `CT Buffer`_. |
| * |
| * This message must be sent as `MMIO HXG Message`_. |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_HOST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_REQUEST_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:16 | DATA0 = MBZ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 15:0 | ACTION = _`GUC_ACTION_HOST2GUC_CONTROL_CTB` = 0x4509 | |
| * +---+-------+--------------------------------------------------------------+ |
| * | 1 | 31:0 | **CONTROL** - control `CTB based communication`_ | |
| * | | | | |
| * | | | - _`GUC_CTB_CONTROL_DISABLE` = 0 | |
| * | | | - _`GUC_CTB_CONTROL_ENABLE` = 1 | |
| * +---+-------+--------------------------------------------------------------+ |
| * |
| * +---+-------+--------------------------------------------------------------+ |
| * | | Bits | Description | |
| * +===+=======+==============================================================+ |
| * | 0 | 31 | ORIGIN = GUC_HXG_ORIGIN_GUC_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 30:28 | TYPE = GUC_HXG_TYPE_RESPONSE_SUCCESS_ | |
| * | +-------+--------------------------------------------------------------+ |
| * | | 27:0 | DATA0 = MBZ | |
| * +---+-------+--------------------------------------------------------------+ |
| */ |
| #define GUC_ACTION_HOST2GUC_CONTROL_CTB 0x4509 |
| |
| #define HOST2GUC_CONTROL_CTB_REQUEST_MSG_LEN (GUC_HXG_REQUEST_MSG_MIN_LEN + 1u) |
| #define HOST2GUC_CONTROL_CTB_REQUEST_MSG_0_MBZ GUC_HXG_REQUEST_MSG_0_DATA0 |
| #define HOST2GUC_CONTROL_CTB_REQUEST_MSG_1_CONTROL GUC_HXG_REQUEST_MSG_n_DATAn |
| #define GUC_CTB_CONTROL_DISABLE 0u |
| #define GUC_CTB_CONTROL_ENABLE 1u |
| |
| #define HOST2GUC_CONTROL_CTB_RESPONSE_MSG_LEN GUC_HXG_RESPONSE_MSG_MIN_LEN |
| #define HOST2GUC_CONTROL_CTB_RESPONSE_MSG_0_MBZ GUC_HXG_RESPONSE_MSG_0_DATA0 |
| |
| /* legacy definitions */ |
| |
| enum xe_guc_action { |
| XE_GUC_ACTION_DEFAULT = 0x0, |
| XE_GUC_ACTION_REQUEST_PREEMPTION = 0x2, |
| XE_GUC_ACTION_REQUEST_ENGINE_RESET = 0x3, |
| XE_GUC_ACTION_ALLOCATE_DOORBELL = 0x10, |
| XE_GUC_ACTION_DEALLOCATE_DOORBELL = 0x20, |
| XE_GUC_ACTION_LOG_BUFFER_FILE_FLUSH_COMPLETE = 0x30, |
| XE_GUC_ACTION_UK_LOG_ENABLE_LOGGING = 0x40, |
| XE_GUC_ACTION_FORCE_LOG_BUFFER_FLUSH = 0x302, |
| XE_GUC_ACTION_ENTER_S_STATE = 0x501, |
| XE_GUC_ACTION_EXIT_S_STATE = 0x502, |
| XE_GUC_ACTION_GLOBAL_SCHED_POLICY_CHANGE = 0x506, |
| XE_GUC_ACTION_SCHED_CONTEXT = 0x1000, |
| XE_GUC_ACTION_SCHED_CONTEXT_MODE_SET = 0x1001, |
| XE_GUC_ACTION_SCHED_CONTEXT_MODE_DONE = 0x1002, |
| XE_GUC_ACTION_SCHED_ENGINE_MODE_SET = 0x1003, |
| XE_GUC_ACTION_SCHED_ENGINE_MODE_DONE = 0x1004, |
| XE_GUC_ACTION_SET_CONTEXT_PRIORITY = 0x1005, |
| XE_GUC_ACTION_SET_CONTEXT_EXECUTION_QUANTUM = 0x1006, |
| XE_GUC_ACTION_SET_CONTEXT_PREEMPTION_TIMEOUT = 0x1007, |
| XE_GUC_ACTION_CONTEXT_RESET_NOTIFICATION = 0x1008, |
| XE_GUC_ACTION_ENGINE_FAILURE_NOTIFICATION = 0x1009, |
| XE_GUC_ACTION_HOST2GUC_UPDATE_CONTEXT_POLICIES = 0x100B, |
| XE_GUC_ACTION_AUTHENTICATE_HUC = 0x4000, |
| XE_GUC_ACTION_GET_HWCONFIG = 0x4100, |
| XE_GUC_ACTION_REGISTER_CONTEXT = 0x4502, |
| XE_GUC_ACTION_DEREGISTER_CONTEXT = 0x4503, |
| XE_GUC_ACTION_REGISTER_COMMAND_TRANSPORT_BUFFER = 0x4505, |
| XE_GUC_ACTION_DEREGISTER_COMMAND_TRANSPORT_BUFFER = 0x4506, |
| XE_GUC_ACTION_DEREGISTER_CONTEXT_DONE = 0x4600, |
| XE_GUC_ACTION_REGISTER_CONTEXT_MULTI_LRC = 0x4601, |
| XE_GUC_ACTION_CLIENT_SOFT_RESET = 0x5507, |
| XE_GUC_ACTION_SET_ENG_UTIL_BUFF = 0x550A, |
| XE_GUC_ACTION_NOTIFY_MEMORY_CAT_ERROR = 0x6000, |
| XE_GUC_ACTION_REPORT_PAGE_FAULT_REQ_DESC = 0x6002, |
| XE_GUC_ACTION_PAGE_FAULT_RES_DESC = 0x6003, |
| XE_GUC_ACTION_ACCESS_COUNTER_NOTIFY = 0x6004, |
| XE_GUC_ACTION_TLB_INVALIDATION = 0x7000, |
| XE_GUC_ACTION_TLB_INVALIDATION_DONE = 0x7001, |
| XE_GUC_ACTION_TLB_INVALIDATION_ALL = 0x7002, |
| XE_GUC_ACTION_STATE_CAPTURE_NOTIFICATION = 0x8002, |
| XE_GUC_ACTION_NOTIFY_FLUSH_LOG_BUFFER_TO_FILE = 0x8003, |
| XE_GUC_ACTION_NOTIFY_CRASH_DUMP_POSTED = 0x8004, |
| XE_GUC_ACTION_NOTIFY_EXCEPTION = 0x8005, |
| XE_GUC_ACTION_LIMIT |
| }; |
| |
| enum xe_guc_preempt_options { |
| XE_GUC_PREEMPT_OPTION_DROP_WORK_Q = 0x4, |
| XE_GUC_PREEMPT_OPTION_DROP_SUBMIT_Q = 0x8, |
| }; |
| |
| enum xe_guc_report_status { |
| XE_GUC_REPORT_STATUS_UNKNOWN = 0x0, |
| XE_GUC_REPORT_STATUS_ACKED = 0x1, |
| XE_GUC_REPORT_STATUS_ERROR = 0x2, |
| XE_GUC_REPORT_STATUS_COMPLETE = 0x4, |
| }; |
| |
| enum xe_guc_sleep_state_status { |
| XE_GUC_SLEEP_STATE_SUCCESS = 0x1, |
| XE_GUC_SLEEP_STATE_PREEMPT_TO_IDLE_FAILED = 0x2, |
| XE_GUC_SLEEP_STATE_ENGINE_RESET_FAILED = 0x3 |
| #define XE_GUC_SLEEP_STATE_INVALID_MASK 0x80000000 |
| }; |
| |
| #define GUC_LOG_CONTROL_LOGGING_ENABLED (1 << 0) |
| #define GUC_LOG_CONTROL_VERBOSITY_SHIFT 4 |
| #define GUC_LOG_CONTROL_VERBOSITY_MASK (0xF << GUC_LOG_CONTROL_VERBOSITY_SHIFT) |
| #define GUC_LOG_CONTROL_DEFAULT_LOGGING (1 << 8) |
| |
| #define XE_GUC_TLB_INVAL_TYPE_SHIFT 0 |
| #define XE_GUC_TLB_INVAL_MODE_SHIFT 8 |
| /* Flush PPC or SMRO caches along with TLB invalidation request */ |
| #define XE_GUC_TLB_INVAL_FLUSH_CACHE (1 << 31) |
| |
| enum xe_guc_tlb_invalidation_type { |
| XE_GUC_TLB_INVAL_FULL = 0x0, |
| XE_GUC_TLB_INVAL_PAGE_SELECTIVE = 0x1, |
| XE_GUC_TLB_INVAL_PAGE_SELECTIVE_CTX = 0x2, |
| XE_GUC_TLB_INVAL_GUC = 0x3, |
| }; |
| |
| /* |
| * 0: Heavy mode of Invalidation: |
| * The pipeline of the engine(s) for which the invalidation is targeted to is |
| * blocked, and all the in-flight transactions are guaranteed to be Globally |
| * Observed before completing the TLB invalidation |
| * 1: Lite mode of Invalidation: |
| * TLBs of the targeted engine(s) are immediately invalidated. |
| * In-flight transactions are NOT guaranteed to be Globally Observed before |
| * completing TLB invalidation. |
| * Light Invalidation Mode is to be used only when |
| * it can be guaranteed (by SW) that the address translations remain invariant |
| * for the in-flight transactions across the TLB invalidation. In other words, |
| * this mode can be used when the TLB invalidation is intended to clear out the |
| * stale cached translations that are no longer in use. Light Invalidation Mode |
| * is much faster than the Heavy Invalidation Mode, as it does not wait for the |
| * in-flight transactions to be GOd. |
| */ |
| enum xe_guc_tlb_inval_mode { |
| XE_GUC_TLB_INVAL_MODE_HEAVY = 0x0, |
| XE_GUC_TLB_INVAL_MODE_LITE = 0x1, |
| }; |
| |
| #endif |
