| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * LTC2664 4 channel, 12-/16-Bit Voltage Output SoftSpan DAC driver |
| * LTC2672 5 channel, 12-/16-Bit Current Output Softspan DAC driver |
| * |
| * Copyright 2024 Analog Devices Inc. |
| */ |
| |
| #include <linux/bitfield.h> |
| #include <linux/cleanup.h> |
| #include <linux/device.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/iio/iio.h> |
| #include <linux/kernel.h> |
| #include <linux/math64.h> |
| #include <linux/module.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/mutex.h> |
| #include <linux/property.h> |
| #include <linux/regmap.h> |
| #include <linux/regulator/consumer.h> |
| #include <linux/spi/spi.h> |
| |
| #define LTC2664_CMD_WRITE_N(n) (0x00 + (n)) |
| #define LTC2664_CMD_UPDATE_N(n) (0x10 + (n)) |
| #define LTC2664_CMD_WRITE_N_UPDATE_ALL 0x20 |
| #define LTC2664_CMD_WRITE_N_UPDATE_N(n) (0x30 + (n)) |
| #define LTC2664_CMD_POWER_DOWN_N(n) (0x40 + (n)) |
| #define LTC2664_CMD_POWER_DOWN_ALL 0x50 |
| #define LTC2664_CMD_SPAN_N(n) (0x60 + (n)) |
| #define LTC2664_CMD_CONFIG 0x70 |
| #define LTC2664_CMD_MUX 0xB0 |
| #define LTC2664_CMD_TOGGLE_SEL 0xC0 |
| #define LTC2664_CMD_GLOBAL_TOGGLE 0xD0 |
| #define LTC2664_CMD_NO_OPERATION 0xF0 |
| #define LTC2664_REF_DISABLE 0x0001 |
| #define LTC2664_MSPAN_SOFTSPAN 7 |
| |
| #define LTC2672_MAX_CHANNEL 5 |
| #define LTC2672_MAX_SPAN 7 |
| #define LTC2672_SCALE_MULTIPLIER(n) (50 * BIT(n)) |
| |
| enum { |
| LTC2664_SPAN_RANGE_0V_5V, |
| LTC2664_SPAN_RANGE_0V_10V, |
| LTC2664_SPAN_RANGE_M5V_5V, |
| LTC2664_SPAN_RANGE_M10V_10V, |
| LTC2664_SPAN_RANGE_M2V5_2V5, |
| }; |
| |
| enum { |
| LTC2664_INPUT_A, |
| LTC2664_INPUT_B, |
| LTC2664_INPUT_B_AVAIL, |
| LTC2664_POWERDOWN, |
| LTC2664_POWERDOWN_MODE, |
| LTC2664_TOGGLE_EN, |
| LTC2664_GLOBAL_TOGGLE, |
| }; |
| |
| static const u16 ltc2664_mspan_lut[8][2] = { |
| { LTC2664_SPAN_RANGE_M10V_10V, 32768 }, /* MPS2=0, MPS1=0, MSP0=0 (0)*/ |
| { LTC2664_SPAN_RANGE_M5V_5V, 32768 }, /* MPS2=0, MPS1=0, MSP0=1 (1)*/ |
| { LTC2664_SPAN_RANGE_M2V5_2V5, 32768 }, /* MPS2=0, MPS1=1, MSP0=0 (2)*/ |
| { LTC2664_SPAN_RANGE_0V_10V, 0 }, /* MPS2=0, MPS1=1, MSP0=1 (3)*/ |
| { LTC2664_SPAN_RANGE_0V_10V, 32768 }, /* MPS2=1, MPS1=0, MSP0=0 (4)*/ |
| { LTC2664_SPAN_RANGE_0V_5V, 0 }, /* MPS2=1, MPS1=0, MSP0=1 (5)*/ |
| { LTC2664_SPAN_RANGE_0V_5V, 32768 }, /* MPS2=1, MPS1=1, MSP0=0 (6)*/ |
| { LTC2664_SPAN_RANGE_0V_5V, 0 } /* MPS2=1, MPS1=1, MSP0=1 (7)*/ |
| }; |
| |
| struct ltc2664_state; |
| |
| struct ltc2664_chip_info { |
| const char *name; |
| int (*scale_get)(const struct ltc2664_state *st, int c); |
| int (*offset_get)(const struct ltc2664_state *st, int c); |
| int measurement_type; |
| unsigned int num_channels; |
| const int (*span_helper)[2]; |
| unsigned int num_span; |
| unsigned int internal_vref_mv; |
| bool manual_span_support; |
| bool rfsadj_support; |
| }; |
| |
| struct ltc2664_chan { |
| /* indicates if the channel should be toggled */ |
| bool toggle_chan; |
| /* indicates if the channel is in powered down state */ |
| bool powerdown; |
| /* span code of the channel */ |
| u8 span; |
| /* raw data of the current state of the chip registers (A/B) */ |
| u16 raw[2]; |
| }; |
| |
| struct ltc2664_state { |
| struct spi_device *spi; |
| struct regmap *regmap; |
| struct ltc2664_chan channels[LTC2672_MAX_CHANNEL]; |
| /* lock to protect against multiple access to the device and shared data */ |
| struct mutex lock; |
| const struct ltc2664_chip_info *chip_info; |
| struct iio_chan_spec *iio_channels; |
| int vref_mv; |
| u32 rfsadj_ohms; |
| u32 toggle_sel; |
| bool global_toggle; |
| }; |
| |
| static const int ltc2664_span_helper[][2] = { |
| { 0, 5000 }, |
| { 0, 10000 }, |
| { -5000, 5000 }, |
| { -10000, 10000 }, |
| { -2500, 2500 }, |
| }; |
| |
| static const int ltc2672_span_helper[][2] = { |
| { 0, 0 }, |
| { 0, 3125 }, |
| { 0, 6250 }, |
| { 0, 12500 }, |
| { 0, 25000 }, |
| { 0, 50000 }, |
| { 0, 100000 }, |
| { 0, 200000 }, |
| { 0, 300000 }, |
| }; |
| |
| static int ltc2664_scale_get(const struct ltc2664_state *st, int c) |
| { |
| const struct ltc2664_chan *chan = &st->channels[c]; |
| const int (*span_helper)[2] = st->chip_info->span_helper; |
| int span, fs; |
| |
| span = chan->span; |
| if (span < 0) |
| return span; |
| |
| fs = span_helper[span][1] - span_helper[span][0]; |
| |
| return fs * st->vref_mv / 2500; |
| } |
| |
| static int ltc2672_scale_get(const struct ltc2664_state *st, int c) |
| { |
| const struct ltc2664_chan *chan = &st->channels[c]; |
| int span, fs; |
| |
| span = chan->span - 1; |
| if (span < 0) |
| return span; |
| |
| fs = 1000 * st->vref_mv; |
| |
| if (span == LTC2672_MAX_SPAN) |
| return mul_u64_u32_div(4800, fs, st->rfsadj_ohms); |
| |
| return mul_u64_u32_div(LTC2672_SCALE_MULTIPLIER(span), fs, st->rfsadj_ohms); |
| } |
| |
| static int ltc2664_offset_get(const struct ltc2664_state *st, int c) |
| { |
| const struct ltc2664_chan *chan = &st->channels[c]; |
| int span; |
| |
| span = chan->span; |
| if (span < 0) |
| return span; |
| |
| if (st->chip_info->span_helper[span][0] < 0) |
| return -32768; |
| |
| return 0; |
| } |
| |
| static int ltc2664_dac_code_write(struct ltc2664_state *st, u32 chan, u32 input, |
| u16 code) |
| { |
| struct ltc2664_chan *c = &st->channels[chan]; |
| int ret, reg; |
| |
| guard(mutex)(&st->lock); |
| /* select the correct input register to write to */ |
| if (c->toggle_chan) { |
| ret = regmap_write(st->regmap, LTC2664_CMD_TOGGLE_SEL, |
| input << chan); |
| if (ret) |
| return ret; |
| } |
| /* |
| * If in toggle mode the dac should be updated by an |
| * external signal (or sw toggle) and not here. |
| */ |
| if (st->toggle_sel & BIT(chan)) |
| reg = LTC2664_CMD_WRITE_N(chan); |
| else |
| reg = LTC2664_CMD_WRITE_N_UPDATE_N(chan); |
| |
| ret = regmap_write(st->regmap, reg, code); |
| if (ret) |
| return ret; |
| |
| c->raw[input] = code; |
| |
| if (c->toggle_chan) { |
| ret = regmap_write(st->regmap, LTC2664_CMD_TOGGLE_SEL, |
| st->toggle_sel); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static void ltc2664_dac_code_read(struct ltc2664_state *st, u32 chan, u32 input, |
| u32 *code) |
| { |
| guard(mutex)(&st->lock); |
| *code = st->channels[chan].raw[input]; |
| } |
| |
| static const int ltc2664_raw_range[] = { 0, 1, U16_MAX }; |
| |
| static int ltc2664_read_avail(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, |
| const int **vals, int *type, int *length, |
| long info) |
| { |
| switch (info) { |
| case IIO_CHAN_INFO_RAW: |
| *vals = ltc2664_raw_range; |
| *type = IIO_VAL_INT; |
| |
| return IIO_AVAIL_RANGE; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ltc2664_read_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int *val, |
| int *val2, long info) |
| { |
| struct ltc2664_state *st = iio_priv(indio_dev); |
| |
| switch (info) { |
| case IIO_CHAN_INFO_RAW: |
| ltc2664_dac_code_read(st, chan->channel, LTC2664_INPUT_A, val); |
| |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_OFFSET: |
| *val = st->chip_info->offset_get(st, chan->channel); |
| |
| return IIO_VAL_INT; |
| case IIO_CHAN_INFO_SCALE: |
| *val = st->chip_info->scale_get(st, chan->channel); |
| |
| *val2 = 16; |
| return IIO_VAL_FRACTIONAL_LOG2; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static int ltc2664_write_raw(struct iio_dev *indio_dev, |
| struct iio_chan_spec const *chan, int val, |
| int val2, long info) |
| { |
| struct ltc2664_state *st = iio_priv(indio_dev); |
| |
| switch (info) { |
| case IIO_CHAN_INFO_RAW: |
| if (val > U16_MAX || val < 0) |
| return -EINVAL; |
| |
| return ltc2664_dac_code_write(st, chan->channel, |
| LTC2664_INPUT_A, val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static ssize_t ltc2664_reg_bool_get(struct iio_dev *indio_dev, |
| uintptr_t private, |
| const struct iio_chan_spec *chan, |
| char *buf) |
| { |
| struct ltc2664_state *st = iio_priv(indio_dev); |
| u32 val; |
| |
| guard(mutex)(&st->lock); |
| switch (private) { |
| case LTC2664_POWERDOWN: |
| val = st->channels[chan->channel].powerdown; |
| |
| return sysfs_emit(buf, "%u\n", val); |
| case LTC2664_POWERDOWN_MODE: |
| return sysfs_emit(buf, "42kohm_to_gnd\n"); |
| case LTC2664_TOGGLE_EN: |
| val = !!(st->toggle_sel & BIT(chan->channel)); |
| |
| return sysfs_emit(buf, "%u\n", val); |
| case LTC2664_GLOBAL_TOGGLE: |
| val = st->global_toggle; |
| |
| return sysfs_emit(buf, "%u\n", val); |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static ssize_t ltc2664_reg_bool_set(struct iio_dev *indio_dev, |
| uintptr_t private, |
| const struct iio_chan_spec *chan, |
| const char *buf, size_t len) |
| { |
| struct ltc2664_state *st = iio_priv(indio_dev); |
| int ret; |
| bool en; |
| |
| ret = kstrtobool(buf, &en); |
| if (ret) |
| return ret; |
| |
| guard(mutex)(&st->lock); |
| switch (private) { |
| case LTC2664_POWERDOWN: |
| ret = regmap_write(st->regmap, |
| en ? LTC2664_CMD_POWER_DOWN_N(chan->channel) : |
| LTC2664_CMD_UPDATE_N(chan->channel), en); |
| if (ret) |
| return ret; |
| |
| st->channels[chan->channel].powerdown = en; |
| |
| return len; |
| case LTC2664_TOGGLE_EN: |
| if (en) |
| st->toggle_sel |= BIT(chan->channel); |
| else |
| st->toggle_sel &= ~BIT(chan->channel); |
| |
| ret = regmap_write(st->regmap, LTC2664_CMD_TOGGLE_SEL, |
| st->toggle_sel); |
| if (ret) |
| return ret; |
| |
| return len; |
| case LTC2664_GLOBAL_TOGGLE: |
| ret = regmap_write(st->regmap, LTC2664_CMD_GLOBAL_TOGGLE, en); |
| if (ret) |
| return ret; |
| |
| st->global_toggle = en; |
| |
| return len; |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static ssize_t ltc2664_dac_input_read(struct iio_dev *indio_dev, |
| uintptr_t private, |
| const struct iio_chan_spec *chan, |
| char *buf) |
| { |
| struct ltc2664_state *st = iio_priv(indio_dev); |
| u32 val; |
| |
| if (private == LTC2664_INPUT_B_AVAIL) |
| return sysfs_emit(buf, "[%u %u %u]\n", ltc2664_raw_range[0], |
| ltc2664_raw_range[1], |
| ltc2664_raw_range[2] / 4); |
| |
| ltc2664_dac_code_read(st, chan->channel, private, &val); |
| |
| return sysfs_emit(buf, "%u\n", val); |
| } |
| |
| static ssize_t ltc2664_dac_input_write(struct iio_dev *indio_dev, |
| uintptr_t private, |
| const struct iio_chan_spec *chan, |
| const char *buf, size_t len) |
| { |
| struct ltc2664_state *st = iio_priv(indio_dev); |
| int ret; |
| u16 val; |
| |
| if (private == LTC2664_INPUT_B_AVAIL) |
| return -EINVAL; |
| |
| ret = kstrtou16(buf, 10, &val); |
| if (ret) |
| return ret; |
| |
| ret = ltc2664_dac_code_write(st, chan->channel, private, val); |
| if (ret) |
| return ret; |
| |
| return len; |
| } |
| |
| static int ltc2664_reg_access(struct iio_dev *indio_dev, |
| unsigned int reg, |
| unsigned int writeval, |
| unsigned int *readval) |
| { |
| struct ltc2664_state *st = iio_priv(indio_dev); |
| |
| if (readval) |
| return -EOPNOTSUPP; |
| |
| return regmap_write(st->regmap, reg, writeval); |
| } |
| |
| #define LTC2664_CHAN_EXT_INFO(_name, _what, _shared, _read, _write) { \ |
| .name = _name, \ |
| .read = (_read), \ |
| .write = (_write), \ |
| .private = (_what), \ |
| .shared = (_shared), \ |
| } |
| |
| /* |
| * For toggle mode we only expose the symbol attr (sw_toggle) in case a TGPx is |
| * not provided in dts. |
| */ |
| static const struct iio_chan_spec_ext_info ltc2664_toggle_sym_ext_info[] = { |
| LTC2664_CHAN_EXT_INFO("raw0", LTC2664_INPUT_A, IIO_SEPARATE, |
| ltc2664_dac_input_read, ltc2664_dac_input_write), |
| LTC2664_CHAN_EXT_INFO("raw1", LTC2664_INPUT_B, IIO_SEPARATE, |
| ltc2664_dac_input_read, ltc2664_dac_input_write), |
| LTC2664_CHAN_EXT_INFO("powerdown", LTC2664_POWERDOWN, IIO_SEPARATE, |
| ltc2664_reg_bool_get, ltc2664_reg_bool_set), |
| LTC2664_CHAN_EXT_INFO("powerdown_mode", LTC2664_POWERDOWN_MODE, |
| IIO_SEPARATE, ltc2664_reg_bool_get, NULL), |
| LTC2664_CHAN_EXT_INFO("symbol", LTC2664_GLOBAL_TOGGLE, IIO_SEPARATE, |
| ltc2664_reg_bool_get, ltc2664_reg_bool_set), |
| LTC2664_CHAN_EXT_INFO("toggle_en", LTC2664_TOGGLE_EN, |
| IIO_SEPARATE, ltc2664_reg_bool_get, |
| ltc2664_reg_bool_set), |
| { } |
| }; |
| |
| static const struct iio_chan_spec_ext_info ltc2664_ext_info[] = { |
| LTC2664_CHAN_EXT_INFO("powerdown", LTC2664_POWERDOWN, IIO_SEPARATE, |
| ltc2664_reg_bool_get, ltc2664_reg_bool_set), |
| LTC2664_CHAN_EXT_INFO("powerdown_mode", LTC2664_POWERDOWN_MODE, |
| IIO_SEPARATE, ltc2664_reg_bool_get, NULL), |
| { } |
| }; |
| |
| static const struct iio_chan_spec ltc2664_channel_template = { |
| .indexed = 1, |
| .output = 1, |
| .info_mask_separate = BIT(IIO_CHAN_INFO_SCALE) | |
| BIT(IIO_CHAN_INFO_OFFSET) | |
| BIT(IIO_CHAN_INFO_RAW), |
| .info_mask_separate_available = BIT(IIO_CHAN_INFO_RAW), |
| .ext_info = ltc2664_ext_info, |
| }; |
| |
| static const struct ltc2664_chip_info ltc2664_chip = { |
| .name = "ltc2664", |
| .scale_get = ltc2664_scale_get, |
| .offset_get = ltc2664_offset_get, |
| .measurement_type = IIO_VOLTAGE, |
| .num_channels = 4, |
| .span_helper = ltc2664_span_helper, |
| .num_span = ARRAY_SIZE(ltc2664_span_helper), |
| .internal_vref_mv = 2500, |
| .manual_span_support = true, |
| .rfsadj_support = false, |
| }; |
| |
| static const struct ltc2664_chip_info ltc2672_chip = { |
| .name = "ltc2672", |
| .scale_get = ltc2672_scale_get, |
| .offset_get = ltc2664_offset_get, |
| .measurement_type = IIO_CURRENT, |
| .num_channels = 5, |
| .span_helper = ltc2672_span_helper, |
| .num_span = ARRAY_SIZE(ltc2672_span_helper), |
| .internal_vref_mv = 1250, |
| .manual_span_support = false, |
| .rfsadj_support = true, |
| }; |
| |
| static int ltc2664_set_span(const struct ltc2664_state *st, int min, int max, |
| int chan) |
| { |
| const struct ltc2664_chip_info *chip_info = st->chip_info; |
| const int (*span_helper)[2] = chip_info->span_helper; |
| int span, ret; |
| |
| for (span = 0; span < chip_info->num_span; span++) { |
| if (min == span_helper[span][0] && max == span_helper[span][1]) |
| break; |
| } |
| |
| if (span == chip_info->num_span) |
| return -EINVAL; |
| |
| ret = regmap_write(st->regmap, LTC2664_CMD_SPAN_N(chan), span); |
| if (ret) |
| return ret; |
| |
| return span; |
| } |
| |
| static int ltc2664_channel_config(struct ltc2664_state *st) |
| { |
| const struct ltc2664_chip_info *chip_info = st->chip_info; |
| struct device *dev = &st->spi->dev; |
| u32 reg, tmp[2], mspan; |
| int ret, span = 0; |
| |
| mspan = LTC2664_MSPAN_SOFTSPAN; |
| ret = device_property_read_u32(dev, "adi,manual-span-operation-config", |
| &mspan); |
| if (!ret) { |
| if (!chip_info->manual_span_support) |
| return dev_err_probe(dev, -EINVAL, |
| "adi,manual-span-operation-config not supported\n"); |
| |
| if (mspan >= ARRAY_SIZE(ltc2664_mspan_lut)) |
| return dev_err_probe(dev, -EINVAL, |
| "adi,manual-span-operation-config not in range\n"); |
| } |
| |
| st->rfsadj_ohms = 20000; |
| ret = device_property_read_u32(dev, "adi,rfsadj-ohms", &st->rfsadj_ohms); |
| if (!ret) { |
| if (!chip_info->rfsadj_support) |
| return dev_err_probe(dev, -EINVAL, |
| "adi,rfsadj-ohms not supported\n"); |
| |
| if (st->rfsadj_ohms < 19000 || st->rfsadj_ohms > 41000) |
| return dev_err_probe(dev, -EINVAL, |
| "adi,rfsadj-ohms not in range\n"); |
| } |
| |
| device_for_each_child_node_scoped(dev, child) { |
| struct ltc2664_chan *chan; |
| |
| ret = fwnode_property_read_u32(child, "reg", ®); |
| if (ret) |
| return dev_err_probe(dev, ret, |
| "Failed to get reg property\n"); |
| |
| if (reg >= chip_info->num_channels) |
| return dev_err_probe(dev, -EINVAL, |
| "reg bigger than: %d\n", |
| chip_info->num_channels); |
| |
| chan = &st->channels[reg]; |
| |
| if (fwnode_property_read_bool(child, "adi,toggle-mode")) { |
| chan->toggle_chan = true; |
| /* assume sw toggle ABI */ |
| st->iio_channels[reg].ext_info = ltc2664_toggle_sym_ext_info; |
| |
| /* |
| * Clear IIO_CHAN_INFO_RAW bit as toggle channels expose |
| * out_voltage/current_raw{0|1} files. |
| */ |
| __clear_bit(IIO_CHAN_INFO_RAW, |
| &st->iio_channels[reg].info_mask_separate); |
| } |
| |
| chan->raw[0] = ltc2664_mspan_lut[mspan][1]; |
| chan->raw[1] = ltc2664_mspan_lut[mspan][1]; |
| |
| chan->span = ltc2664_mspan_lut[mspan][0]; |
| |
| ret = fwnode_property_read_u32_array(child, "output-range-microvolt", |
| tmp, ARRAY_SIZE(tmp)); |
| if (!ret && mspan == LTC2664_MSPAN_SOFTSPAN) { |
| chan->span = ltc2664_set_span(st, tmp[0] / 1000, |
| tmp[1] / 1000, reg); |
| if (span < 0) |
| return dev_err_probe(dev, span, |
| "Failed to set span\n"); |
| } |
| |
| ret = fwnode_property_read_u32_array(child, "output-range-microamp", |
| tmp, ARRAY_SIZE(tmp)); |
| if (!ret) { |
| chan->span = ltc2664_set_span(st, 0, tmp[1] / 1000, reg); |
| if (span < 0) |
| return dev_err_probe(dev, span, |
| "Failed to set span\n"); |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int ltc2664_setup(struct ltc2664_state *st) |
| { |
| const struct ltc2664_chip_info *chip_info = st->chip_info; |
| struct gpio_desc *gpio; |
| int ret, i; |
| |
| /* If we have a clr/reset pin, use that to reset the chip. */ |
| gpio = devm_gpiod_get_optional(&st->spi->dev, "reset", GPIOD_OUT_HIGH); |
| if (IS_ERR(gpio)) |
| return dev_err_probe(&st->spi->dev, PTR_ERR(gpio), |
| "Failed to get reset gpio"); |
| if (gpio) { |
| fsleep(1000); |
| gpiod_set_value_cansleep(gpio, 0); |
| } |
| |
| /* |
| * Duplicate the default channel configuration as it can change during |
| * @ltc2664_channel_config() |
| */ |
| st->iio_channels = devm_kcalloc(&st->spi->dev, |
| chip_info->num_channels, |
| sizeof(struct iio_chan_spec), |
| GFP_KERNEL); |
| if (!st->iio_channels) |
| return -ENOMEM; |
| |
| for (i = 0; i < chip_info->num_channels; i++) { |
| st->iio_channels[i] = ltc2664_channel_template; |
| st->iio_channels[i].type = chip_info->measurement_type; |
| st->iio_channels[i].channel = i; |
| } |
| |
| ret = ltc2664_channel_config(st); |
| if (ret) |
| return ret; |
| |
| return regmap_set_bits(st->regmap, LTC2664_CMD_CONFIG, LTC2664_REF_DISABLE); |
| } |
| |
| static const struct regmap_config ltc2664_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 16, |
| .max_register = LTC2664_CMD_NO_OPERATION, |
| }; |
| |
| static const struct iio_info ltc2664_info = { |
| .write_raw = ltc2664_write_raw, |
| .read_raw = ltc2664_read_raw, |
| .read_avail = ltc2664_read_avail, |
| .debugfs_reg_access = ltc2664_reg_access, |
| }; |
| |
| static int ltc2664_probe(struct spi_device *spi) |
| { |
| static const char * const regulators[] = { "vcc", "iovcc", "v-neg" }; |
| const struct ltc2664_chip_info *chip_info; |
| struct device *dev = &spi->dev; |
| struct iio_dev *indio_dev; |
| struct ltc2664_state *st; |
| int ret; |
| |
| indio_dev = devm_iio_device_alloc(dev, sizeof(*st)); |
| if (!indio_dev) |
| return -ENOMEM; |
| |
| st = iio_priv(indio_dev); |
| st->spi = spi; |
| |
| chip_info = spi_get_device_match_data(spi); |
| if (!chip_info) |
| return -ENODEV; |
| |
| st->chip_info = chip_info; |
| |
| mutex_init(&st->lock); |
| |
| st->regmap = devm_regmap_init_spi(spi, <c2664_regmap_config); |
| if (IS_ERR(st->regmap)) |
| return dev_err_probe(dev, PTR_ERR(st->regmap), |
| "Failed to init regmap"); |
| |
| ret = devm_regulator_bulk_get_enable(dev, ARRAY_SIZE(regulators), |
| regulators); |
| if (ret) |
| return dev_err_probe(dev, ret, "Failed to enable regulators\n"); |
| |
| ret = devm_regulator_get_enable_read_voltage(dev, "ref"); |
| if (ret < 0 && ret != -ENODEV) |
| return ret; |
| |
| st->vref_mv = ret > 0 ? ret / 1000 : chip_info->internal_vref_mv; |
| |
| ret = ltc2664_setup(st); |
| if (ret) |
| return ret; |
| |
| indio_dev->name = chip_info->name; |
| indio_dev->info = <c2664_info; |
| indio_dev->modes = INDIO_DIRECT_MODE; |
| indio_dev->channels = st->iio_channels; |
| indio_dev->num_channels = chip_info->num_channels; |
| |
| return devm_iio_device_register(dev, indio_dev); |
| } |
| |
| static const struct spi_device_id ltc2664_id[] = { |
| { "ltc2664", (kernel_ulong_t)<c2664_chip }, |
| { "ltc2672", (kernel_ulong_t)<c2672_chip }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(spi, ltc2664_id); |
| |
| static const struct of_device_id ltc2664_of_id[] = { |
| { .compatible = "adi,ltc2664", .data = <c2664_chip }, |
| { .compatible = "adi,ltc2672", .data = <c2672_chip }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, ltc2664_of_id); |
| |
| static struct spi_driver ltc2664_driver = { |
| .driver = { |
| .name = "ltc2664", |
| .of_match_table = ltc2664_of_id, |
| }, |
| .probe = ltc2664_probe, |
| .id_table = ltc2664_id, |
| }; |
| module_spi_driver(ltc2664_driver); |
| |
| MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); |
| MODULE_AUTHOR("Kim Seer Paller <kimseer.paller@analog.com>"); |
| MODULE_DESCRIPTION("Analog Devices LTC2664 and LTC2672 DAC"); |
| MODULE_LICENSE("GPL"); |