drivers/net/ethernet/amd/Kconfig

# SPDX-License-Identifier: GPL-2.0-only
#
# AMD network device configuration
#

config NET_VENDOR_AMD
	bool "AMD devices"
	default y
	depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
		   SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
		   ISA || EISA || PCMCIA || ARM64
	help
	  If you have a network (Ethernet) chipset belonging to this class,
	  say Y.

	  Note that the answer to this question does not directly affect
	  the kernel: saying N will just cause the configurator to skip all
	  the questions regarding AMD chipsets. If you say Y, you will be asked
	  for your specific chipset/driver in the following questions.

if NET_VENDOR_AMD

config A2065
	tristate "A2065 support"
	depends on ZORRO
	select CRC32
	help
	  If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
	  say N.

	  To compile this driver as a module, choose M here: the module
	  will be called a2065.

config AMD8111_ETH
	tristate "AMD 8111 (new PCI LANCE) support"
	depends on PCI
	select CRC32
	select MII
	help
	  If you have an AMD 8111-based PCI LANCE ethernet card,
	  answer Y here.

	  To compile this driver as a module, choose M here. The module
	  will be called amd8111e.

config LANCE
	tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
	depends on ISA && ISA_DMA_API && !ARM && !PPC32
	select NETDEV_LEGACY_INIT
	help
	  If you have a network (Ethernet) card of this type, say Y here.
	  Some LinkSys cards are of this type.

	  To compile this driver as a module, choose M here: the module
	  will be called lance.  This is recommended.

config PCNET32
	tristate "AMD PCnet32 PCI support"
	depends on PCI && HAS_IOPORT
	select CRC32
	select MII
	help
	  If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
	  answer Y here.

	  To compile this driver as a module, choose M here. The module
	  will be called pcnet32.

config ARIADNE
	tristate "Ariadne support"
	depends on ZORRO
	help
	  If you have a Village Tronic Ariadne Ethernet adapter, say Y.
	  Otherwise, say N.

	  To compile this driver as a module, choose M here: the module
	  will be called ariadne.

config ATARILANCE
	tristate "Atari LANCE support"
	depends on ATARI
	help
	  Say Y to include support for several Atari Ethernet adapters based
	  on the AMD LANCE chipset: RieblCard (with or without battery), or
	  PAMCard VME (also the version by Rhotron, with different addresses).

config DECLANCE
	tristate "DEC LANCE ethernet controller support"
	depends on MACH_DECSTATION
	select CRC32
	help
	  This driver is for the series of Ethernet controllers produced by
	  DEC (now Compaq) based on the AMD LANCE chipset, including the
	  DEPCA series.  (This chipset is better known via the NE2100 cards.)

config HPLANCE
	tristate "HP on-board LANCE support"
	depends on DIO
	select CRC32
	help
	  If you want to use the builtin "LANCE" Ethernet controller on an
	  HP300 machine, say Y here.

config MIPS_AU1X00_ENET
	tristate "MIPS AU1000 Ethernet support"
	depends on MIPS_ALCHEMY
	select PHYLIB
	select CRC32
	help
	  If you have an Alchemy Semi AU1X00 based system
	  say Y.  Otherwise, say N.

config MVME147_NET
	tristate "MVME147 (LANCE) Ethernet support"
	depends on MVME147
	select CRC32
	help
	  Support for the on-board Ethernet interface on the Motorola MVME147
	  single-board computer.  Say Y here to include the
	  driver for this chip in your kernel.
	  To compile this driver as a module, choose M here.

config PCMCIA_NMCLAN
	tristate "New Media PCMCIA support"
	depends on PCMCIA && HAS_IOPORT
	help
	  Say Y here if you intend to attach a New Media Ethernet or LiveWire
	  PCMCIA (PC-card) Ethernet card to your computer.

	  To compile this driver as a module, choose M here: the module will be
	  called nmclan_cs.  If unsure, say N.

config SUN3LANCE
	tristate "Sun3/Sun3x on-board LANCE support"
	depends on (SUN3 || SUN3X)
	help
	  Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
	  featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
	  here to compile in the Linux driver for this and enable Ethernet.
	  General Linux information on the Sun 3 and 3x series (now
	  discontinued) is at
	  <http://www.angelfire.com/ca2/tech68k/sun3.html>.

	  If you're not building a kernel for a Sun 3, say N.

config SUNLANCE
	tristate "Sun LANCE support"
	depends on SBUS
	select CRC32
	help
	  This driver supports the "le" interface present on all 32-bit Sparc
	  systems, on some older Ultra systems and as an Sbus option.  These
	  cards are based on the AMD LANCE chipset, which is better known
	  via the NE2100 cards.

	  To compile this driver as a module, choose M here: the module
	  will be called sunlance.

config AMD_XGBE
	tristate "AMD 10GbE Ethernet driver"
	depends on (OF_ADDRESS || ACPI || PCI) && HAS_IOMEM
	depends on X86 || ARM64 || COMPILE_TEST
	depends on PTP_1588_CLOCK_OPTIONAL
	select BITREVERSE
	select CRC32
	select PHYLIB
	select AMD_XGBE_HAVE_ECC if X86
	help
	  This driver supports the AMD 10GbE Ethernet device found on an
	  AMD SoC.

	  To compile this driver as a module, choose M here: the module
	  will be called amd-xgbe.

config AMD_XGBE_DCB
	bool "Data Center Bridging (DCB) support"
	default n
	depends on AMD_XGBE && DCB
	help
	  Say Y here to enable Data Center Bridging (DCB) support in the
	  driver.

	  If unsure, say N.

config AMD_XGBE_HAVE_ECC
	bool
	default n

config PDS_CORE
	tristate "AMD/Pensando Data Systems Core Device Support"
	depends on 64BIT && PCI
	select AUXILIARY_BUS
	select NET_DEVLINK
	help
	  This enables the support for the AMD/Pensando Core device family of
	  adapters.  More specific information on this driver can be
	  found in
	  <file:Documentation/networking/device_drivers/ethernet/amd/pds_core.rst>.

	  To compile this driver as a module, choose M here. The module
	  will be called pds_core.

endif # NET_VENDOR_AMD