| // SPDX-License-Identifier: GPL-2.0-only |
| /* Copyright (C) 2023 Intel Corporation */ |
| |
| #include "idpf.h" |
| #include "idpf_virtchnl.h" |
| |
| static const struct net_device_ops idpf_netdev_ops; |
| |
| /** |
| * idpf_init_vector_stack - Fill the MSIX vector stack with vector index |
| * @adapter: private data struct |
| * |
| * Return 0 on success, error on failure |
| */ |
| static int idpf_init_vector_stack(struct idpf_adapter *adapter) |
| { |
| struct idpf_vector_lifo *stack; |
| u16 min_vec; |
| u32 i; |
| |
| mutex_lock(&adapter->vector_lock); |
| min_vec = adapter->num_msix_entries - adapter->num_avail_msix; |
| stack = &adapter->vector_stack; |
| stack->size = adapter->num_msix_entries; |
| /* set the base and top to point at start of the 'free pool' to |
| * distribute the unused vectors on-demand basis |
| */ |
| stack->base = min_vec; |
| stack->top = min_vec; |
| |
| stack->vec_idx = kcalloc(stack->size, sizeof(u16), GFP_KERNEL); |
| if (!stack->vec_idx) { |
| mutex_unlock(&adapter->vector_lock); |
| |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < stack->size; i++) |
| stack->vec_idx[i] = i; |
| |
| mutex_unlock(&adapter->vector_lock); |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_deinit_vector_stack - zero out the MSIX vector stack |
| * @adapter: private data struct |
| */ |
| static void idpf_deinit_vector_stack(struct idpf_adapter *adapter) |
| { |
| struct idpf_vector_lifo *stack; |
| |
| mutex_lock(&adapter->vector_lock); |
| stack = &adapter->vector_stack; |
| kfree(stack->vec_idx); |
| stack->vec_idx = NULL; |
| mutex_unlock(&adapter->vector_lock); |
| } |
| |
| /** |
| * idpf_mb_intr_rel_irq - Free the IRQ association with the OS |
| * @adapter: adapter structure |
| * |
| * This will also disable interrupt mode and queue up mailbox task. Mailbox |
| * task will reschedule itself if not in interrupt mode. |
| */ |
| static void idpf_mb_intr_rel_irq(struct idpf_adapter *adapter) |
| { |
| clear_bit(IDPF_MB_INTR_MODE, adapter->flags); |
| kfree(free_irq(adapter->msix_entries[0].vector, adapter)); |
| queue_delayed_work(adapter->mbx_wq, &adapter->mbx_task, 0); |
| } |
| |
| /** |
| * idpf_intr_rel - Release interrupt capabilities and free memory |
| * @adapter: adapter to disable interrupts on |
| */ |
| void idpf_intr_rel(struct idpf_adapter *adapter) |
| { |
| if (!adapter->msix_entries) |
| return; |
| |
| idpf_mb_intr_rel_irq(adapter); |
| pci_free_irq_vectors(adapter->pdev); |
| idpf_send_dealloc_vectors_msg(adapter); |
| idpf_deinit_vector_stack(adapter); |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| } |
| |
| /** |
| * idpf_mb_intr_clean - Interrupt handler for the mailbox |
| * @irq: interrupt number |
| * @data: pointer to the adapter structure |
| */ |
| static irqreturn_t idpf_mb_intr_clean(int __always_unused irq, void *data) |
| { |
| struct idpf_adapter *adapter = (struct idpf_adapter *)data; |
| |
| queue_delayed_work(adapter->mbx_wq, &adapter->mbx_task, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * idpf_mb_irq_enable - Enable MSIX interrupt for the mailbox |
| * @adapter: adapter to get the hardware address for register write |
| */ |
| static void idpf_mb_irq_enable(struct idpf_adapter *adapter) |
| { |
| struct idpf_intr_reg *intr = &adapter->mb_vector.intr_reg; |
| u32 val; |
| |
| val = intr->dyn_ctl_intena_m | intr->dyn_ctl_itridx_m; |
| writel(val, intr->dyn_ctl); |
| writel(intr->icr_ena_ctlq_m, intr->icr_ena); |
| } |
| |
| /** |
| * idpf_mb_intr_req_irq - Request irq for the mailbox interrupt |
| * @adapter: adapter structure to pass to the mailbox irq handler |
| */ |
| static int idpf_mb_intr_req_irq(struct idpf_adapter *adapter) |
| { |
| int irq_num, mb_vidx = 0, err; |
| char *name; |
| |
| irq_num = adapter->msix_entries[mb_vidx].vector; |
| name = kasprintf(GFP_KERNEL, "%s-%s-%d", |
| dev_driver_string(&adapter->pdev->dev), |
| "Mailbox", mb_vidx); |
| err = request_irq(irq_num, adapter->irq_mb_handler, 0, name, adapter); |
| if (err) { |
| dev_err(&adapter->pdev->dev, |
| "IRQ request for mailbox failed, error: %d\n", err); |
| |
| return err; |
| } |
| |
| set_bit(IDPF_MB_INTR_MODE, adapter->flags); |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_set_mb_vec_id - Set vector index for mailbox |
| * @adapter: adapter structure to access the vector chunks |
| * |
| * The first vector id in the requested vector chunks from the CP is for |
| * the mailbox |
| */ |
| static void idpf_set_mb_vec_id(struct idpf_adapter *adapter) |
| { |
| if (adapter->req_vec_chunks) |
| adapter->mb_vector.v_idx = |
| le16_to_cpu(adapter->caps.mailbox_vector_id); |
| else |
| adapter->mb_vector.v_idx = 0; |
| } |
| |
| /** |
| * idpf_mb_intr_init - Initialize the mailbox interrupt |
| * @adapter: adapter structure to store the mailbox vector |
| */ |
| static int idpf_mb_intr_init(struct idpf_adapter *adapter) |
| { |
| adapter->dev_ops.reg_ops.mb_intr_reg_init(adapter); |
| adapter->irq_mb_handler = idpf_mb_intr_clean; |
| |
| return idpf_mb_intr_req_irq(adapter); |
| } |
| |
| /** |
| * idpf_vector_lifo_push - push MSIX vector index onto stack |
| * @adapter: private data struct |
| * @vec_idx: vector index to store |
| */ |
| static int idpf_vector_lifo_push(struct idpf_adapter *adapter, u16 vec_idx) |
| { |
| struct idpf_vector_lifo *stack = &adapter->vector_stack; |
| |
| lockdep_assert_held(&adapter->vector_lock); |
| |
| if (stack->top == stack->base) { |
| dev_err(&adapter->pdev->dev, "Exceeded the vector stack limit: %d\n", |
| stack->top); |
| return -EINVAL; |
| } |
| |
| stack->vec_idx[--stack->top] = vec_idx; |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_vector_lifo_pop - pop MSIX vector index from stack |
| * @adapter: private data struct |
| */ |
| static int idpf_vector_lifo_pop(struct idpf_adapter *adapter) |
| { |
| struct idpf_vector_lifo *stack = &adapter->vector_stack; |
| |
| lockdep_assert_held(&adapter->vector_lock); |
| |
| if (stack->top == stack->size) { |
| dev_err(&adapter->pdev->dev, "No interrupt vectors are available to distribute!\n"); |
| |
| return -EINVAL; |
| } |
| |
| return stack->vec_idx[stack->top++]; |
| } |
| |
| /** |
| * idpf_vector_stash - Store the vector indexes onto the stack |
| * @adapter: private data struct |
| * @q_vector_idxs: vector index array |
| * @vec_info: info related to the number of vectors |
| * |
| * This function is a no-op if there are no vectors indexes to be stashed |
| */ |
| static void idpf_vector_stash(struct idpf_adapter *adapter, u16 *q_vector_idxs, |
| struct idpf_vector_info *vec_info) |
| { |
| int i, base = 0; |
| u16 vec_idx; |
| |
| lockdep_assert_held(&adapter->vector_lock); |
| |
| if (!vec_info->num_curr_vecs) |
| return; |
| |
| /* For default vports, no need to stash vector allocated from the |
| * default pool onto the stack |
| */ |
| if (vec_info->default_vport) |
| base = IDPF_MIN_Q_VEC; |
| |
| for (i = vec_info->num_curr_vecs - 1; i >= base ; i--) { |
| vec_idx = q_vector_idxs[i]; |
| idpf_vector_lifo_push(adapter, vec_idx); |
| adapter->num_avail_msix++; |
| } |
| } |
| |
| /** |
| * idpf_req_rel_vector_indexes - Request or release MSIX vector indexes |
| * @adapter: driver specific private structure |
| * @q_vector_idxs: vector index array |
| * @vec_info: info related to the number of vectors |
| * |
| * This is the core function to distribute the MSIX vectors acquired from the |
| * OS. It expects the caller to pass the number of vectors required and |
| * also previously allocated. First, it stashes previously allocated vector |
| * indexes on to the stack and then figures out if it can allocate requested |
| * vectors. It can wait on acquiring the mutex lock. If the caller passes 0 as |
| * requested vectors, then this function just stashes the already allocated |
| * vectors and returns 0. |
| * |
| * Returns actual number of vectors allocated on success, error value on failure |
| * If 0 is returned, implies the stack has no vectors to allocate which is also |
| * a failure case for the caller |
| */ |
| int idpf_req_rel_vector_indexes(struct idpf_adapter *adapter, |
| u16 *q_vector_idxs, |
| struct idpf_vector_info *vec_info) |
| { |
| u16 num_req_vecs, num_alloc_vecs = 0, max_vecs; |
| struct idpf_vector_lifo *stack; |
| int i, j, vecid; |
| |
| mutex_lock(&adapter->vector_lock); |
| stack = &adapter->vector_stack; |
| num_req_vecs = vec_info->num_req_vecs; |
| |
| /* Stash interrupt vector indexes onto the stack if required */ |
| idpf_vector_stash(adapter, q_vector_idxs, vec_info); |
| |
| if (!num_req_vecs) |
| goto rel_lock; |
| |
| if (vec_info->default_vport) { |
| /* As IDPF_MIN_Q_VEC per default vport is put aside in the |
| * default pool of the stack, use them for default vports |
| */ |
| j = vec_info->index * IDPF_MIN_Q_VEC + IDPF_MBX_Q_VEC; |
| for (i = 0; i < IDPF_MIN_Q_VEC; i++) { |
| q_vector_idxs[num_alloc_vecs++] = stack->vec_idx[j++]; |
| num_req_vecs--; |
| } |
| } |
| |
| /* Find if stack has enough vector to allocate */ |
| max_vecs = min(adapter->num_avail_msix, num_req_vecs); |
| |
| for (j = 0; j < max_vecs; j++) { |
| vecid = idpf_vector_lifo_pop(adapter); |
| q_vector_idxs[num_alloc_vecs++] = vecid; |
| } |
| adapter->num_avail_msix -= max_vecs; |
| |
| rel_lock: |
| mutex_unlock(&adapter->vector_lock); |
| |
| return num_alloc_vecs; |
| } |
| |
| /** |
| * idpf_intr_req - Request interrupt capabilities |
| * @adapter: adapter to enable interrupts on |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| int idpf_intr_req(struct idpf_adapter *adapter) |
| { |
| u16 default_vports = idpf_get_default_vports(adapter); |
| int num_q_vecs, total_vecs, num_vec_ids; |
| int min_vectors, v_actual, err; |
| unsigned int vector; |
| u16 *vecids; |
| |
| total_vecs = idpf_get_reserved_vecs(adapter); |
| num_q_vecs = total_vecs - IDPF_MBX_Q_VEC; |
| |
| err = idpf_send_alloc_vectors_msg(adapter, num_q_vecs); |
| if (err) { |
| dev_err(&adapter->pdev->dev, |
| "Failed to allocate %d vectors: %d\n", num_q_vecs, err); |
| |
| return -EAGAIN; |
| } |
| |
| min_vectors = IDPF_MBX_Q_VEC + IDPF_MIN_Q_VEC * default_vports; |
| v_actual = pci_alloc_irq_vectors(adapter->pdev, min_vectors, |
| total_vecs, PCI_IRQ_MSIX); |
| if (v_actual < min_vectors) { |
| dev_err(&adapter->pdev->dev, "Failed to allocate MSIX vectors: %d\n", |
| v_actual); |
| err = -EAGAIN; |
| goto send_dealloc_vecs; |
| } |
| |
| adapter->msix_entries = kcalloc(v_actual, sizeof(struct msix_entry), |
| GFP_KERNEL); |
| |
| if (!adapter->msix_entries) { |
| err = -ENOMEM; |
| goto free_irq; |
| } |
| |
| idpf_set_mb_vec_id(adapter); |
| |
| vecids = kcalloc(total_vecs, sizeof(u16), GFP_KERNEL); |
| if (!vecids) { |
| err = -ENOMEM; |
| goto free_msix; |
| } |
| |
| num_vec_ids = idpf_get_vec_ids(adapter, vecids, total_vecs, |
| &adapter->req_vec_chunks->vchunks); |
| if (num_vec_ids < v_actual) { |
| err = -EINVAL; |
| goto free_vecids; |
| } |
| |
| for (vector = 0; vector < v_actual; vector++) { |
| adapter->msix_entries[vector].entry = vecids[vector]; |
| adapter->msix_entries[vector].vector = |
| pci_irq_vector(adapter->pdev, vector); |
| } |
| |
| adapter->num_req_msix = total_vecs; |
| adapter->num_msix_entries = v_actual; |
| /* 'num_avail_msix' is used to distribute excess vectors to the vports |
| * after considering the minimum vectors required per each default |
| * vport |
| */ |
| adapter->num_avail_msix = v_actual - min_vectors; |
| |
| /* Fill MSIX vector lifo stack with vector indexes */ |
| err = idpf_init_vector_stack(adapter); |
| if (err) |
| goto free_vecids; |
| |
| err = idpf_mb_intr_init(adapter); |
| if (err) |
| goto deinit_vec_stack; |
| idpf_mb_irq_enable(adapter); |
| kfree(vecids); |
| |
| return 0; |
| |
| deinit_vec_stack: |
| idpf_deinit_vector_stack(adapter); |
| free_vecids: |
| kfree(vecids); |
| free_msix: |
| kfree(adapter->msix_entries); |
| adapter->msix_entries = NULL; |
| free_irq: |
| pci_free_irq_vectors(adapter->pdev); |
| send_dealloc_vecs: |
| idpf_send_dealloc_vectors_msg(adapter); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_find_mac_filter - Search filter list for specific mac filter |
| * @vconfig: Vport config structure |
| * @macaddr: The MAC address |
| * |
| * Returns ptr to the filter object or NULL. Must be called while holding the |
| * mac_filter_list_lock. |
| **/ |
| static struct idpf_mac_filter *idpf_find_mac_filter(struct idpf_vport_config *vconfig, |
| const u8 *macaddr) |
| { |
| struct idpf_mac_filter *f; |
| |
| if (!macaddr) |
| return NULL; |
| |
| list_for_each_entry(f, &vconfig->user_config.mac_filter_list, list) { |
| if (ether_addr_equal(macaddr, f->macaddr)) |
| return f; |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * __idpf_del_mac_filter - Delete a MAC filter from the filter list |
| * @vport_config: Vport config structure |
| * @macaddr: The MAC address |
| * |
| * Returns 0 on success, error value on failure |
| **/ |
| static int __idpf_del_mac_filter(struct idpf_vport_config *vport_config, |
| const u8 *macaddr) |
| { |
| struct idpf_mac_filter *f; |
| |
| spin_lock_bh(&vport_config->mac_filter_list_lock); |
| f = idpf_find_mac_filter(vport_config, macaddr); |
| if (f) { |
| list_del(&f->list); |
| kfree(f); |
| } |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_del_mac_filter - Delete a MAC filter from the filter list |
| * @vport: Main vport structure |
| * @np: Netdev private structure |
| * @macaddr: The MAC address |
| * @async: Don't wait for return message |
| * |
| * Removes filter from list and if interface is up, tells hardware about the |
| * removed filter. |
| **/ |
| static int idpf_del_mac_filter(struct idpf_vport *vport, |
| struct idpf_netdev_priv *np, |
| const u8 *macaddr, bool async) |
| { |
| struct idpf_vport_config *vport_config; |
| struct idpf_mac_filter *f; |
| |
| vport_config = np->adapter->vport_config[np->vport_idx]; |
| |
| spin_lock_bh(&vport_config->mac_filter_list_lock); |
| f = idpf_find_mac_filter(vport_config, macaddr); |
| if (f) { |
| f->remove = true; |
| } else { |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| |
| return -EINVAL; |
| } |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| |
| if (np->state == __IDPF_VPORT_UP) { |
| int err; |
| |
| err = idpf_add_del_mac_filters(vport, np, false, async); |
| if (err) |
| return err; |
| } |
| |
| return __idpf_del_mac_filter(vport_config, macaddr); |
| } |
| |
| /** |
| * __idpf_add_mac_filter - Add mac filter helper function |
| * @vport_config: Vport config structure |
| * @macaddr: Address to add |
| * |
| * Takes mac_filter_list_lock spinlock to add new filter to list. |
| */ |
| static int __idpf_add_mac_filter(struct idpf_vport_config *vport_config, |
| const u8 *macaddr) |
| { |
| struct idpf_mac_filter *f; |
| |
| spin_lock_bh(&vport_config->mac_filter_list_lock); |
| |
| f = idpf_find_mac_filter(vport_config, macaddr); |
| if (f) { |
| f->remove = false; |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| |
| return 0; |
| } |
| |
| f = kzalloc(sizeof(*f), GFP_ATOMIC); |
| if (!f) { |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| |
| return -ENOMEM; |
| } |
| |
| ether_addr_copy(f->macaddr, macaddr); |
| list_add_tail(&f->list, &vport_config->user_config.mac_filter_list); |
| f->add = true; |
| |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_add_mac_filter - Add a mac filter to the filter list |
| * @vport: Main vport structure |
| * @np: Netdev private structure |
| * @macaddr: The MAC address |
| * @async: Don't wait for return message |
| * |
| * Returns 0 on success or error on failure. If interface is up, we'll also |
| * send the virtchnl message to tell hardware about the filter. |
| **/ |
| static int idpf_add_mac_filter(struct idpf_vport *vport, |
| struct idpf_netdev_priv *np, |
| const u8 *macaddr, bool async) |
| { |
| struct idpf_vport_config *vport_config; |
| int err; |
| |
| vport_config = np->adapter->vport_config[np->vport_idx]; |
| err = __idpf_add_mac_filter(vport_config, macaddr); |
| if (err) |
| return err; |
| |
| if (np->state == __IDPF_VPORT_UP) |
| err = idpf_add_del_mac_filters(vport, np, true, async); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_del_all_mac_filters - Delete all MAC filters in list |
| * @vport: main vport struct |
| * |
| * Takes mac_filter_list_lock spinlock. Deletes all filters |
| */ |
| static void idpf_del_all_mac_filters(struct idpf_vport *vport) |
| { |
| struct idpf_vport_config *vport_config; |
| struct idpf_mac_filter *f, *ftmp; |
| |
| vport_config = vport->adapter->vport_config[vport->idx]; |
| spin_lock_bh(&vport_config->mac_filter_list_lock); |
| |
| list_for_each_entry_safe(f, ftmp, &vport_config->user_config.mac_filter_list, |
| list) { |
| list_del(&f->list); |
| kfree(f); |
| } |
| |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| } |
| |
| /** |
| * idpf_restore_mac_filters - Re-add all MAC filters in list |
| * @vport: main vport struct |
| * |
| * Takes mac_filter_list_lock spinlock. Sets add field to true for filters to |
| * resync filters back to HW. |
| */ |
| static void idpf_restore_mac_filters(struct idpf_vport *vport) |
| { |
| struct idpf_vport_config *vport_config; |
| struct idpf_mac_filter *f; |
| |
| vport_config = vport->adapter->vport_config[vport->idx]; |
| spin_lock_bh(&vport_config->mac_filter_list_lock); |
| |
| list_for_each_entry(f, &vport_config->user_config.mac_filter_list, list) |
| f->add = true; |
| |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| |
| idpf_add_del_mac_filters(vport, netdev_priv(vport->netdev), |
| true, false); |
| } |
| |
| /** |
| * idpf_remove_mac_filters - Remove all MAC filters in list |
| * @vport: main vport struct |
| * |
| * Takes mac_filter_list_lock spinlock. Sets remove field to true for filters |
| * to remove filters in HW. |
| */ |
| static void idpf_remove_mac_filters(struct idpf_vport *vport) |
| { |
| struct idpf_vport_config *vport_config; |
| struct idpf_mac_filter *f; |
| |
| vport_config = vport->adapter->vport_config[vport->idx]; |
| spin_lock_bh(&vport_config->mac_filter_list_lock); |
| |
| list_for_each_entry(f, &vport_config->user_config.mac_filter_list, list) |
| f->remove = true; |
| |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| |
| idpf_add_del_mac_filters(vport, netdev_priv(vport->netdev), |
| false, false); |
| } |
| |
| /** |
| * idpf_deinit_mac_addr - deinitialize mac address for vport |
| * @vport: main vport structure |
| */ |
| static void idpf_deinit_mac_addr(struct idpf_vport *vport) |
| { |
| struct idpf_vport_config *vport_config; |
| struct idpf_mac_filter *f; |
| |
| vport_config = vport->adapter->vport_config[vport->idx]; |
| |
| spin_lock_bh(&vport_config->mac_filter_list_lock); |
| |
| f = idpf_find_mac_filter(vport_config, vport->default_mac_addr); |
| if (f) { |
| list_del(&f->list); |
| kfree(f); |
| } |
| |
| spin_unlock_bh(&vport_config->mac_filter_list_lock); |
| } |
| |
| /** |
| * idpf_init_mac_addr - initialize mac address for vport |
| * @vport: main vport structure |
| * @netdev: pointer to netdev struct associated with this vport |
| */ |
| static int idpf_init_mac_addr(struct idpf_vport *vport, |
| struct net_device *netdev) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_adapter *adapter = vport->adapter; |
| int err; |
| |
| if (is_valid_ether_addr(vport->default_mac_addr)) { |
| eth_hw_addr_set(netdev, vport->default_mac_addr); |
| ether_addr_copy(netdev->perm_addr, vport->default_mac_addr); |
| |
| return idpf_add_mac_filter(vport, np, vport->default_mac_addr, |
| false); |
| } |
| |
| if (!idpf_is_cap_ena(adapter, IDPF_OTHER_CAPS, |
| VIRTCHNL2_CAP_MACFILTER)) { |
| dev_err(&adapter->pdev->dev, |
| "MAC address is not provided and capability is not set\n"); |
| |
| return -EINVAL; |
| } |
| |
| eth_hw_addr_random(netdev); |
| err = idpf_add_mac_filter(vport, np, netdev->dev_addr, false); |
| if (err) |
| return err; |
| |
| dev_info(&adapter->pdev->dev, "Invalid MAC address %pM, using random %pM\n", |
| vport->default_mac_addr, netdev->dev_addr); |
| ether_addr_copy(vport->default_mac_addr, netdev->dev_addr); |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_cfg_netdev - Allocate, configure and register a netdev |
| * @vport: main vport structure |
| * |
| * Returns 0 on success, negative value on failure. |
| */ |
| static int idpf_cfg_netdev(struct idpf_vport *vport) |
| { |
| struct idpf_adapter *adapter = vport->adapter; |
| struct idpf_vport_config *vport_config; |
| netdev_features_t dflt_features; |
| netdev_features_t offloads = 0; |
| struct idpf_netdev_priv *np; |
| struct net_device *netdev; |
| u16 idx = vport->idx; |
| int err; |
| |
| vport_config = adapter->vport_config[idx]; |
| |
| /* It's possible we already have a netdev allocated and registered for |
| * this vport |
| */ |
| if (test_bit(IDPF_VPORT_REG_NETDEV, vport_config->flags)) { |
| netdev = adapter->netdevs[idx]; |
| np = netdev_priv(netdev); |
| np->vport = vport; |
| np->vport_idx = vport->idx; |
| np->vport_id = vport->vport_id; |
| vport->netdev = netdev; |
| |
| return idpf_init_mac_addr(vport, netdev); |
| } |
| |
| netdev = alloc_etherdev_mqs(sizeof(struct idpf_netdev_priv), |
| vport_config->max_q.max_txq, |
| vport_config->max_q.max_rxq); |
| if (!netdev) |
| return -ENOMEM; |
| |
| vport->netdev = netdev; |
| np = netdev_priv(netdev); |
| np->vport = vport; |
| np->adapter = adapter; |
| np->vport_idx = vport->idx; |
| np->vport_id = vport->vport_id; |
| |
| spin_lock_init(&np->stats_lock); |
| |
| err = idpf_init_mac_addr(vport, netdev); |
| if (err) { |
| free_netdev(vport->netdev); |
| vport->netdev = NULL; |
| |
| return err; |
| } |
| |
| /* assign netdev_ops */ |
| netdev->netdev_ops = &idpf_netdev_ops; |
| |
| /* setup watchdog timeout value to be 5 second */ |
| netdev->watchdog_timeo = 5 * HZ; |
| |
| netdev->dev_port = idx; |
| |
| /* configure default MTU size */ |
| netdev->min_mtu = ETH_MIN_MTU; |
| netdev->max_mtu = vport->max_mtu; |
| |
| dflt_features = NETIF_F_SG | |
| NETIF_F_HIGHDMA; |
| |
| if (idpf_is_cap_ena_all(adapter, IDPF_RSS_CAPS, IDPF_CAP_RSS)) |
| dflt_features |= NETIF_F_RXHASH; |
| if (idpf_is_cap_ena_all(adapter, IDPF_CSUM_CAPS, IDPF_CAP_RX_CSUM_L4V4)) |
| dflt_features |= NETIF_F_IP_CSUM; |
| if (idpf_is_cap_ena_all(adapter, IDPF_CSUM_CAPS, IDPF_CAP_RX_CSUM_L4V6)) |
| dflt_features |= NETIF_F_IPV6_CSUM; |
| if (idpf_is_cap_ena(adapter, IDPF_CSUM_CAPS, IDPF_CAP_RX_CSUM)) |
| dflt_features |= NETIF_F_RXCSUM; |
| if (idpf_is_cap_ena_all(adapter, IDPF_CSUM_CAPS, IDPF_CAP_SCTP_CSUM)) |
| dflt_features |= NETIF_F_SCTP_CRC; |
| |
| if (idpf_is_cap_ena(adapter, IDPF_SEG_CAPS, VIRTCHNL2_CAP_SEG_IPV4_TCP)) |
| dflt_features |= NETIF_F_TSO; |
| if (idpf_is_cap_ena(adapter, IDPF_SEG_CAPS, VIRTCHNL2_CAP_SEG_IPV6_TCP)) |
| dflt_features |= NETIF_F_TSO6; |
| if (idpf_is_cap_ena_all(adapter, IDPF_SEG_CAPS, |
| VIRTCHNL2_CAP_SEG_IPV4_UDP | |
| VIRTCHNL2_CAP_SEG_IPV6_UDP)) |
| dflt_features |= NETIF_F_GSO_UDP_L4; |
| if (idpf_is_cap_ena_all(adapter, IDPF_RSC_CAPS, IDPF_CAP_RSC)) |
| offloads |= NETIF_F_GRO_HW; |
| /* advertise to stack only if offloads for encapsulated packets is |
| * supported |
| */ |
| if (idpf_is_cap_ena(vport->adapter, IDPF_SEG_CAPS, |
| VIRTCHNL2_CAP_SEG_TX_SINGLE_TUNNEL)) { |
| offloads |= NETIF_F_GSO_UDP_TUNNEL | |
| NETIF_F_GSO_GRE | |
| NETIF_F_GSO_GRE_CSUM | |
| NETIF_F_GSO_PARTIAL | |
| NETIF_F_GSO_UDP_TUNNEL_CSUM | |
| NETIF_F_GSO_IPXIP4 | |
| NETIF_F_GSO_IPXIP6 | |
| 0; |
| |
| if (!idpf_is_cap_ena_all(vport->adapter, IDPF_CSUM_CAPS, |
| IDPF_CAP_TUNNEL_TX_CSUM)) |
| netdev->gso_partial_features |= |
| NETIF_F_GSO_UDP_TUNNEL_CSUM; |
| |
| netdev->gso_partial_features |= NETIF_F_GSO_GRE_CSUM; |
| offloads |= NETIF_F_TSO_MANGLEID; |
| } |
| if (idpf_is_cap_ena(adapter, IDPF_OTHER_CAPS, VIRTCHNL2_CAP_LOOPBACK)) |
| offloads |= NETIF_F_LOOPBACK; |
| |
| netdev->features |= dflt_features; |
| netdev->hw_features |= dflt_features | offloads; |
| netdev->hw_enc_features |= dflt_features | offloads; |
| idpf_set_ethtool_ops(netdev); |
| SET_NETDEV_DEV(netdev, &adapter->pdev->dev); |
| |
| /* carrier off on init to avoid Tx hangs */ |
| netif_carrier_off(netdev); |
| |
| /* make sure transmit queues start off as stopped */ |
| netif_tx_stop_all_queues(netdev); |
| |
| /* The vport can be arbitrarily released so we need to also track |
| * netdevs in the adapter struct |
| */ |
| adapter->netdevs[idx] = netdev; |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_get_free_slot - get the next non-NULL location index in array |
| * @adapter: adapter in which to look for a free vport slot |
| */ |
| static int idpf_get_free_slot(struct idpf_adapter *adapter) |
| { |
| unsigned int i; |
| |
| for (i = 0; i < adapter->max_vports; i++) { |
| if (!adapter->vports[i]) |
| return i; |
| } |
| |
| return IDPF_NO_FREE_SLOT; |
| } |
| |
| /** |
| * idpf_remove_features - Turn off feature configs |
| * @vport: virtual port structure |
| */ |
| static void idpf_remove_features(struct idpf_vport *vport) |
| { |
| struct idpf_adapter *adapter = vport->adapter; |
| |
| if (idpf_is_cap_ena(adapter, IDPF_OTHER_CAPS, VIRTCHNL2_CAP_MACFILTER)) |
| idpf_remove_mac_filters(vport); |
| } |
| |
| /** |
| * idpf_vport_stop - Disable a vport |
| * @vport: vport to disable |
| */ |
| static void idpf_vport_stop(struct idpf_vport *vport) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(vport->netdev); |
| |
| if (np->state <= __IDPF_VPORT_DOWN) |
| return; |
| |
| netif_carrier_off(vport->netdev); |
| netif_tx_disable(vport->netdev); |
| |
| idpf_send_disable_vport_msg(vport); |
| idpf_send_disable_queues_msg(vport); |
| idpf_send_map_unmap_queue_vector_msg(vport, false); |
| /* Normally we ask for queues in create_vport, but if the number of |
| * initially requested queues have changed, for example via ethtool |
| * set channels, we do delete queues and then add the queues back |
| * instead of deleting and reallocating the vport. |
| */ |
| if (test_and_clear_bit(IDPF_VPORT_DEL_QUEUES, vport->flags)) |
| idpf_send_delete_queues_msg(vport); |
| |
| idpf_remove_features(vport); |
| |
| vport->link_up = false; |
| idpf_vport_intr_deinit(vport); |
| idpf_vport_queues_rel(vport); |
| idpf_vport_intr_rel(vport); |
| np->state = __IDPF_VPORT_DOWN; |
| } |
| |
| /** |
| * idpf_stop - Disables a network interface |
| * @netdev: network interface device structure |
| * |
| * The stop entry point is called when an interface is de-activated by the OS, |
| * and the netdevice enters the DOWN state. The hardware is still under the |
| * driver's control, but the netdev interface is disabled. |
| * |
| * Returns success only - not allowed to fail |
| */ |
| static int idpf_stop(struct net_device *netdev) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport *vport; |
| |
| if (test_bit(IDPF_REMOVE_IN_PROG, np->adapter->flags)) |
| return 0; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| idpf_vport_stop(vport); |
| |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_decfg_netdev - Unregister the netdev |
| * @vport: vport for which netdev to be unregistered |
| */ |
| static void idpf_decfg_netdev(struct idpf_vport *vport) |
| { |
| struct idpf_adapter *adapter = vport->adapter; |
| |
| kfree(vport->rx_ptype_lkup); |
| vport->rx_ptype_lkup = NULL; |
| |
| unregister_netdev(vport->netdev); |
| free_netdev(vport->netdev); |
| vport->netdev = NULL; |
| |
| adapter->netdevs[vport->idx] = NULL; |
| } |
| |
| /** |
| * idpf_vport_rel - Delete a vport and free its resources |
| * @vport: the vport being removed |
| */ |
| static void idpf_vport_rel(struct idpf_vport *vport) |
| { |
| struct idpf_adapter *adapter = vport->adapter; |
| struct idpf_vport_config *vport_config; |
| struct idpf_vector_info vec_info; |
| struct idpf_rss_data *rss_data; |
| struct idpf_vport_max_q max_q; |
| u16 idx = vport->idx; |
| |
| vport_config = adapter->vport_config[vport->idx]; |
| idpf_deinit_rss(vport); |
| rss_data = &vport_config->user_config.rss_data; |
| kfree(rss_data->rss_key); |
| rss_data->rss_key = NULL; |
| |
| idpf_send_destroy_vport_msg(vport); |
| |
| /* Release all max queues allocated to the adapter's pool */ |
| max_q.max_rxq = vport_config->max_q.max_rxq; |
| max_q.max_txq = vport_config->max_q.max_txq; |
| max_q.max_bufq = vport_config->max_q.max_bufq; |
| max_q.max_complq = vport_config->max_q.max_complq; |
| idpf_vport_dealloc_max_qs(adapter, &max_q); |
| |
| /* Release all the allocated vectors on the stack */ |
| vec_info.num_req_vecs = 0; |
| vec_info.num_curr_vecs = vport->num_q_vectors; |
| vec_info.default_vport = vport->default_vport; |
| |
| idpf_req_rel_vector_indexes(adapter, vport->q_vector_idxs, &vec_info); |
| |
| kfree(vport->q_vector_idxs); |
| vport->q_vector_idxs = NULL; |
| |
| kfree(adapter->vport_params_recvd[idx]); |
| adapter->vport_params_recvd[idx] = NULL; |
| kfree(adapter->vport_params_reqd[idx]); |
| adapter->vport_params_reqd[idx] = NULL; |
| if (adapter->vport_config[idx]) { |
| kfree(adapter->vport_config[idx]->req_qs_chunks); |
| adapter->vport_config[idx]->req_qs_chunks = NULL; |
| } |
| kfree(vport); |
| adapter->num_alloc_vports--; |
| } |
| |
| /** |
| * idpf_vport_dealloc - cleanup and release a given vport |
| * @vport: pointer to idpf vport structure |
| * |
| * returns nothing |
| */ |
| static void idpf_vport_dealloc(struct idpf_vport *vport) |
| { |
| struct idpf_adapter *adapter = vport->adapter; |
| unsigned int i = vport->idx; |
| |
| idpf_deinit_mac_addr(vport); |
| idpf_vport_stop(vport); |
| |
| if (!test_bit(IDPF_HR_RESET_IN_PROG, adapter->flags)) |
| idpf_decfg_netdev(vport); |
| if (test_bit(IDPF_REMOVE_IN_PROG, adapter->flags)) |
| idpf_del_all_mac_filters(vport); |
| |
| if (adapter->netdevs[i]) { |
| struct idpf_netdev_priv *np = netdev_priv(adapter->netdevs[i]); |
| |
| np->vport = NULL; |
| } |
| |
| idpf_vport_rel(vport); |
| |
| adapter->vports[i] = NULL; |
| adapter->next_vport = idpf_get_free_slot(adapter); |
| } |
| |
| /** |
| * idpf_is_hsplit_supported - check whether the header split is supported |
| * @vport: virtual port to check the capability for |
| * |
| * Return: true if it's supported by the HW/FW, false if not. |
| */ |
| static bool idpf_is_hsplit_supported(const struct idpf_vport *vport) |
| { |
| return idpf_is_queue_model_split(vport->rxq_model) && |
| idpf_is_cap_ena_all(vport->adapter, IDPF_HSPLIT_CAPS, |
| IDPF_CAP_HSPLIT); |
| } |
| |
| /** |
| * idpf_vport_get_hsplit - get the current header split feature state |
| * @vport: virtual port to query the state for |
| * |
| * Return: ``ETHTOOL_TCP_DATA_SPLIT_UNKNOWN`` if not supported, |
| * ``ETHTOOL_TCP_DATA_SPLIT_DISABLED`` if disabled, |
| * ``ETHTOOL_TCP_DATA_SPLIT_ENABLED`` if active. |
| */ |
| u8 idpf_vport_get_hsplit(const struct idpf_vport *vport) |
| { |
| const struct idpf_vport_user_config_data *config; |
| |
| if (!idpf_is_hsplit_supported(vport)) |
| return ETHTOOL_TCP_DATA_SPLIT_UNKNOWN; |
| |
| config = &vport->adapter->vport_config[vport->idx]->user_config; |
| |
| return test_bit(__IDPF_USER_FLAG_HSPLIT, config->user_flags) ? |
| ETHTOOL_TCP_DATA_SPLIT_ENABLED : |
| ETHTOOL_TCP_DATA_SPLIT_DISABLED; |
| } |
| |
| /** |
| * idpf_vport_set_hsplit - enable or disable header split on a given vport |
| * @vport: virtual port to configure |
| * @val: Ethtool flag controlling the header split state |
| * |
| * Return: true on success, false if not supported by the HW. |
| */ |
| bool idpf_vport_set_hsplit(const struct idpf_vport *vport, u8 val) |
| { |
| struct idpf_vport_user_config_data *config; |
| |
| if (!idpf_is_hsplit_supported(vport)) |
| return val == ETHTOOL_TCP_DATA_SPLIT_UNKNOWN; |
| |
| config = &vport->adapter->vport_config[vport->idx]->user_config; |
| |
| switch (val) { |
| case ETHTOOL_TCP_DATA_SPLIT_UNKNOWN: |
| /* Default is to enable */ |
| case ETHTOOL_TCP_DATA_SPLIT_ENABLED: |
| __set_bit(__IDPF_USER_FLAG_HSPLIT, config->user_flags); |
| return true; |
| case ETHTOOL_TCP_DATA_SPLIT_DISABLED: |
| __clear_bit(__IDPF_USER_FLAG_HSPLIT, config->user_flags); |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| /** |
| * idpf_vport_alloc - Allocates the next available struct vport in the adapter |
| * @adapter: board private structure |
| * @max_q: vport max queue info |
| * |
| * returns a pointer to a vport on success, NULL on failure. |
| */ |
| static struct idpf_vport *idpf_vport_alloc(struct idpf_adapter *adapter, |
| struct idpf_vport_max_q *max_q) |
| { |
| struct idpf_rss_data *rss_data; |
| u16 idx = adapter->next_vport; |
| struct idpf_vport *vport; |
| u16 num_max_q; |
| |
| if (idx == IDPF_NO_FREE_SLOT) |
| return NULL; |
| |
| vport = kzalloc(sizeof(*vport), GFP_KERNEL); |
| if (!vport) |
| return vport; |
| |
| if (!adapter->vport_config[idx]) { |
| struct idpf_vport_config *vport_config; |
| |
| vport_config = kzalloc(sizeof(*vport_config), GFP_KERNEL); |
| if (!vport_config) { |
| kfree(vport); |
| |
| return NULL; |
| } |
| |
| adapter->vport_config[idx] = vport_config; |
| } |
| |
| vport->idx = idx; |
| vport->adapter = adapter; |
| vport->compln_clean_budget = IDPF_TX_COMPLQ_CLEAN_BUDGET; |
| vport->default_vport = adapter->num_alloc_vports < |
| idpf_get_default_vports(adapter); |
| |
| num_max_q = max(max_q->max_txq, max_q->max_rxq); |
| vport->q_vector_idxs = kcalloc(num_max_q, sizeof(u16), GFP_KERNEL); |
| if (!vport->q_vector_idxs) { |
| kfree(vport); |
| |
| return NULL; |
| } |
| idpf_vport_init(vport, max_q); |
| |
| /* This alloc is done separate from the LUT because it's not strictly |
| * dependent on how many queues we have. If we change number of queues |
| * and soft reset we'll need a new LUT but the key can remain the same |
| * for as long as the vport exists. |
| */ |
| rss_data = &adapter->vport_config[idx]->user_config.rss_data; |
| rss_data->rss_key = kzalloc(rss_data->rss_key_size, GFP_KERNEL); |
| if (!rss_data->rss_key) { |
| kfree(vport); |
| |
| return NULL; |
| } |
| /* Initialize default rss key */ |
| netdev_rss_key_fill((void *)rss_data->rss_key, rss_data->rss_key_size); |
| |
| /* fill vport slot in the adapter struct */ |
| adapter->vports[idx] = vport; |
| adapter->vport_ids[idx] = idpf_get_vport_id(vport); |
| |
| adapter->num_alloc_vports++; |
| /* prepare adapter->next_vport for next use */ |
| adapter->next_vport = idpf_get_free_slot(adapter); |
| |
| return vport; |
| } |
| |
| /** |
| * idpf_get_stats64 - get statistics for network device structure |
| * @netdev: network interface device structure |
| * @stats: main device statistics structure |
| */ |
| static void idpf_get_stats64(struct net_device *netdev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| |
| spin_lock_bh(&np->stats_lock); |
| *stats = np->netstats; |
| spin_unlock_bh(&np->stats_lock); |
| } |
| |
| /** |
| * idpf_statistics_task - Delayed task to get statistics over mailbox |
| * @work: work_struct handle to our data |
| */ |
| void idpf_statistics_task(struct work_struct *work) |
| { |
| struct idpf_adapter *adapter; |
| int i; |
| |
| adapter = container_of(work, struct idpf_adapter, stats_task.work); |
| |
| for (i = 0; i < adapter->max_vports; i++) { |
| struct idpf_vport *vport = adapter->vports[i]; |
| |
| if (vport && !test_bit(IDPF_HR_RESET_IN_PROG, adapter->flags)) |
| idpf_send_get_stats_msg(vport); |
| } |
| |
| queue_delayed_work(adapter->stats_wq, &adapter->stats_task, |
| msecs_to_jiffies(10000)); |
| } |
| |
| /** |
| * idpf_mbx_task - Delayed task to handle mailbox responses |
| * @work: work_struct handle |
| */ |
| void idpf_mbx_task(struct work_struct *work) |
| { |
| struct idpf_adapter *adapter; |
| |
| adapter = container_of(work, struct idpf_adapter, mbx_task.work); |
| |
| if (test_bit(IDPF_MB_INTR_MODE, adapter->flags)) |
| idpf_mb_irq_enable(adapter); |
| else |
| queue_delayed_work(adapter->mbx_wq, &adapter->mbx_task, |
| msecs_to_jiffies(300)); |
| |
| idpf_recv_mb_msg(adapter); |
| } |
| |
| /** |
| * idpf_service_task - Delayed task for handling mailbox responses |
| * @work: work_struct handle to our data |
| * |
| */ |
| void idpf_service_task(struct work_struct *work) |
| { |
| struct idpf_adapter *adapter; |
| |
| adapter = container_of(work, struct idpf_adapter, serv_task.work); |
| |
| if (idpf_is_reset_detected(adapter) && |
| !idpf_is_reset_in_prog(adapter) && |
| !test_bit(IDPF_REMOVE_IN_PROG, adapter->flags)) { |
| dev_info(&adapter->pdev->dev, "HW reset detected\n"); |
| set_bit(IDPF_HR_FUNC_RESET, adapter->flags); |
| queue_delayed_work(adapter->vc_event_wq, |
| &adapter->vc_event_task, |
| msecs_to_jiffies(10)); |
| } |
| |
| queue_delayed_work(adapter->serv_wq, &adapter->serv_task, |
| msecs_to_jiffies(300)); |
| } |
| |
| /** |
| * idpf_restore_features - Restore feature configs |
| * @vport: virtual port structure |
| */ |
| static void idpf_restore_features(struct idpf_vport *vport) |
| { |
| struct idpf_adapter *adapter = vport->adapter; |
| |
| if (idpf_is_cap_ena(adapter, IDPF_OTHER_CAPS, VIRTCHNL2_CAP_MACFILTER)) |
| idpf_restore_mac_filters(vport); |
| } |
| |
| /** |
| * idpf_set_real_num_queues - set number of queues for netdev |
| * @vport: virtual port structure |
| * |
| * Returns 0 on success, negative on failure. |
| */ |
| static int idpf_set_real_num_queues(struct idpf_vport *vport) |
| { |
| int err; |
| |
| err = netif_set_real_num_rx_queues(vport->netdev, vport->num_rxq); |
| if (err) |
| return err; |
| |
| return netif_set_real_num_tx_queues(vport->netdev, vport->num_txq); |
| } |
| |
| /** |
| * idpf_up_complete - Complete interface up sequence |
| * @vport: virtual port structure |
| * |
| * Returns 0 on success, negative on failure. |
| */ |
| static int idpf_up_complete(struct idpf_vport *vport) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(vport->netdev); |
| |
| if (vport->link_up && !netif_carrier_ok(vport->netdev)) { |
| netif_carrier_on(vport->netdev); |
| netif_tx_start_all_queues(vport->netdev); |
| } |
| |
| np->state = __IDPF_VPORT_UP; |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_rx_init_buf_tail - Write initial buffer ring tail value |
| * @vport: virtual port struct |
| */ |
| static void idpf_rx_init_buf_tail(struct idpf_vport *vport) |
| { |
| int i, j; |
| |
| for (i = 0; i < vport->num_rxq_grp; i++) { |
| struct idpf_rxq_group *grp = &vport->rxq_grps[i]; |
| |
| if (idpf_is_queue_model_split(vport->rxq_model)) { |
| for (j = 0; j < vport->num_bufqs_per_qgrp; j++) { |
| const struct idpf_buf_queue *q = |
| &grp->splitq.bufq_sets[j].bufq; |
| |
| writel(q->next_to_alloc, q->tail); |
| } |
| } else { |
| for (j = 0; j < grp->singleq.num_rxq; j++) { |
| const struct idpf_rx_queue *q = |
| grp->singleq.rxqs[j]; |
| |
| writel(q->next_to_alloc, q->tail); |
| } |
| } |
| } |
| } |
| |
| /** |
| * idpf_vport_open - Bring up a vport |
| * @vport: vport to bring up |
| */ |
| static int idpf_vport_open(struct idpf_vport *vport) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(vport->netdev); |
| struct idpf_adapter *adapter = vport->adapter; |
| struct idpf_vport_config *vport_config; |
| int err; |
| |
| if (np->state != __IDPF_VPORT_DOWN) |
| return -EBUSY; |
| |
| /* we do not allow interface up just yet */ |
| netif_carrier_off(vport->netdev); |
| |
| err = idpf_vport_intr_alloc(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to allocate interrupts for vport %u: %d\n", |
| vport->vport_id, err); |
| return err; |
| } |
| |
| err = idpf_vport_queues_alloc(vport); |
| if (err) |
| goto intr_rel; |
| |
| err = idpf_vport_queue_ids_init(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to initialize queue ids for vport %u: %d\n", |
| vport->vport_id, err); |
| goto queues_rel; |
| } |
| |
| err = idpf_vport_intr_init(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to initialize interrupts for vport %u: %d\n", |
| vport->vport_id, err); |
| goto queues_rel; |
| } |
| |
| err = idpf_rx_bufs_init_all(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to initialize RX buffers for vport %u: %d\n", |
| vport->vport_id, err); |
| goto queues_rel; |
| } |
| |
| err = idpf_queue_reg_init(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to initialize queue registers for vport %u: %d\n", |
| vport->vport_id, err); |
| goto queues_rel; |
| } |
| |
| idpf_rx_init_buf_tail(vport); |
| idpf_vport_intr_ena(vport); |
| |
| err = idpf_send_config_queues_msg(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to configure queues for vport %u, %d\n", |
| vport->vport_id, err); |
| goto intr_deinit; |
| } |
| |
| err = idpf_send_map_unmap_queue_vector_msg(vport, true); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to map queue vectors for vport %u: %d\n", |
| vport->vport_id, err); |
| goto intr_deinit; |
| } |
| |
| err = idpf_send_enable_queues_msg(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to enable queues for vport %u: %d\n", |
| vport->vport_id, err); |
| goto unmap_queue_vectors; |
| } |
| |
| err = idpf_send_enable_vport_msg(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to enable vport %u: %d\n", |
| vport->vport_id, err); |
| err = -EAGAIN; |
| goto disable_queues; |
| } |
| |
| idpf_restore_features(vport); |
| |
| vport_config = adapter->vport_config[vport->idx]; |
| if (vport_config->user_config.rss_data.rss_lut) |
| err = idpf_config_rss(vport); |
| else |
| err = idpf_init_rss(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to initialize RSS for vport %u: %d\n", |
| vport->vport_id, err); |
| goto disable_vport; |
| } |
| |
| err = idpf_up_complete(vport); |
| if (err) { |
| dev_err(&adapter->pdev->dev, "Failed to complete interface up for vport %u: %d\n", |
| vport->vport_id, err); |
| goto deinit_rss; |
| } |
| |
| return 0; |
| |
| deinit_rss: |
| idpf_deinit_rss(vport); |
| disable_vport: |
| idpf_send_disable_vport_msg(vport); |
| disable_queues: |
| idpf_send_disable_queues_msg(vport); |
| unmap_queue_vectors: |
| idpf_send_map_unmap_queue_vector_msg(vport, false); |
| intr_deinit: |
| idpf_vport_intr_deinit(vport); |
| queues_rel: |
| idpf_vport_queues_rel(vport); |
| intr_rel: |
| idpf_vport_intr_rel(vport); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_init_task - Delayed initialization task |
| * @work: work_struct handle to our data |
| * |
| * Init task finishes up pending work started in probe. Due to the asynchronous |
| * nature in which the device communicates with hardware, we may have to wait |
| * several milliseconds to get a response. Instead of busy polling in probe, |
| * pulling it out into a delayed work task prevents us from bogging down the |
| * whole system waiting for a response from hardware. |
| */ |
| void idpf_init_task(struct work_struct *work) |
| { |
| struct idpf_vport_config *vport_config; |
| struct idpf_vport_max_q max_q; |
| struct idpf_adapter *adapter; |
| struct idpf_netdev_priv *np; |
| struct idpf_vport *vport; |
| u16 num_default_vports; |
| struct pci_dev *pdev; |
| bool default_vport; |
| int index, err; |
| |
| adapter = container_of(work, struct idpf_adapter, init_task.work); |
| |
| num_default_vports = idpf_get_default_vports(adapter); |
| if (adapter->num_alloc_vports < num_default_vports) |
| default_vport = true; |
| else |
| default_vport = false; |
| |
| err = idpf_vport_alloc_max_qs(adapter, &max_q); |
| if (err) |
| goto unwind_vports; |
| |
| err = idpf_send_create_vport_msg(adapter, &max_q); |
| if (err) { |
| idpf_vport_dealloc_max_qs(adapter, &max_q); |
| goto unwind_vports; |
| } |
| |
| pdev = adapter->pdev; |
| vport = idpf_vport_alloc(adapter, &max_q); |
| if (!vport) { |
| err = -EFAULT; |
| dev_err(&pdev->dev, "failed to allocate vport: %d\n", |
| err); |
| idpf_vport_dealloc_max_qs(adapter, &max_q); |
| goto unwind_vports; |
| } |
| |
| index = vport->idx; |
| vport_config = adapter->vport_config[index]; |
| |
| init_waitqueue_head(&vport->sw_marker_wq); |
| |
| spin_lock_init(&vport_config->mac_filter_list_lock); |
| |
| INIT_LIST_HEAD(&vport_config->user_config.mac_filter_list); |
| |
| err = idpf_check_supported_desc_ids(vport); |
| if (err) { |
| dev_err(&pdev->dev, "failed to get required descriptor ids\n"); |
| goto cfg_netdev_err; |
| } |
| |
| if (idpf_cfg_netdev(vport)) |
| goto cfg_netdev_err; |
| |
| err = idpf_send_get_rx_ptype_msg(vport); |
| if (err) |
| goto handle_err; |
| |
| /* Once state is put into DOWN, driver is ready for dev_open */ |
| np = netdev_priv(vport->netdev); |
| np->state = __IDPF_VPORT_DOWN; |
| if (test_and_clear_bit(IDPF_VPORT_UP_REQUESTED, vport_config->flags)) |
| idpf_vport_open(vport); |
| |
| /* Spawn and return 'idpf_init_task' work queue until all the |
| * default vports are created |
| */ |
| if (adapter->num_alloc_vports < num_default_vports) { |
| queue_delayed_work(adapter->init_wq, &adapter->init_task, |
| msecs_to_jiffies(5 * (adapter->pdev->devfn & 0x07))); |
| |
| return; |
| } |
| |
| for (index = 0; index < adapter->max_vports; index++) { |
| if (adapter->netdevs[index] && |
| !test_bit(IDPF_VPORT_REG_NETDEV, |
| adapter->vport_config[index]->flags)) { |
| register_netdev(adapter->netdevs[index]); |
| set_bit(IDPF_VPORT_REG_NETDEV, |
| adapter->vport_config[index]->flags); |
| } |
| } |
| |
| /* As all the required vports are created, clear the reset flag |
| * unconditionally here in case we were in reset and the link was down. |
| */ |
| clear_bit(IDPF_HR_RESET_IN_PROG, adapter->flags); |
| /* Start the statistics task now */ |
| queue_delayed_work(adapter->stats_wq, &adapter->stats_task, |
| msecs_to_jiffies(10 * (pdev->devfn & 0x07))); |
| |
| return; |
| |
| handle_err: |
| idpf_decfg_netdev(vport); |
| cfg_netdev_err: |
| idpf_vport_rel(vport); |
| adapter->vports[index] = NULL; |
| unwind_vports: |
| if (default_vport) { |
| for (index = 0; index < adapter->max_vports; index++) { |
| if (adapter->vports[index]) |
| idpf_vport_dealloc(adapter->vports[index]); |
| } |
| } |
| clear_bit(IDPF_HR_RESET_IN_PROG, adapter->flags); |
| } |
| |
| /** |
| * idpf_sriov_ena - Enable or change number of VFs |
| * @adapter: private data struct |
| * @num_vfs: number of VFs to allocate |
| */ |
| static int idpf_sriov_ena(struct idpf_adapter *adapter, int num_vfs) |
| { |
| struct device *dev = &adapter->pdev->dev; |
| int err; |
| |
| err = idpf_send_set_sriov_vfs_msg(adapter, num_vfs); |
| if (err) { |
| dev_err(dev, "Failed to allocate VFs: %d\n", err); |
| |
| return err; |
| } |
| |
| err = pci_enable_sriov(adapter->pdev, num_vfs); |
| if (err) { |
| idpf_send_set_sriov_vfs_msg(adapter, 0); |
| dev_err(dev, "Failed to enable SR-IOV: %d\n", err); |
| |
| return err; |
| } |
| |
| adapter->num_vfs = num_vfs; |
| |
| return num_vfs; |
| } |
| |
| /** |
| * idpf_sriov_configure - Configure the requested VFs |
| * @pdev: pointer to a pci_dev structure |
| * @num_vfs: number of vfs to allocate |
| * |
| * Enable or change the number of VFs. Called when the user updates the number |
| * of VFs in sysfs. |
| **/ |
| int idpf_sriov_configure(struct pci_dev *pdev, int num_vfs) |
| { |
| struct idpf_adapter *adapter = pci_get_drvdata(pdev); |
| |
| if (!idpf_is_cap_ena(adapter, IDPF_OTHER_CAPS, VIRTCHNL2_CAP_SRIOV)) { |
| dev_info(&pdev->dev, "SR-IOV is not supported on this device\n"); |
| |
| return -EOPNOTSUPP; |
| } |
| |
| if (num_vfs) |
| return idpf_sriov_ena(adapter, num_vfs); |
| |
| if (pci_vfs_assigned(pdev)) { |
| dev_warn(&pdev->dev, "Unable to free VFs because some are assigned to VMs\n"); |
| |
| return -EBUSY; |
| } |
| |
| pci_disable_sriov(adapter->pdev); |
| idpf_send_set_sriov_vfs_msg(adapter, 0); |
| adapter->num_vfs = 0; |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_deinit_task - Device deinit routine |
| * @adapter: Driver specific private structure |
| * |
| * Extended remove logic which will be used for |
| * hard reset as well |
| */ |
| void idpf_deinit_task(struct idpf_adapter *adapter) |
| { |
| unsigned int i; |
| |
| /* Wait until the init_task is done else this thread might release |
| * the resources first and the other thread might end up in a bad state |
| */ |
| cancel_delayed_work_sync(&adapter->init_task); |
| |
| if (!adapter->vports) |
| return; |
| |
| cancel_delayed_work_sync(&adapter->stats_task); |
| |
| for (i = 0; i < adapter->max_vports; i++) { |
| if (adapter->vports[i]) |
| idpf_vport_dealloc(adapter->vports[i]); |
| } |
| } |
| |
| /** |
| * idpf_check_reset_complete - check that reset is complete |
| * @hw: pointer to hw struct |
| * @reset_reg: struct with reset registers |
| * |
| * Returns 0 if device is ready to use, or -EBUSY if it's in reset. |
| **/ |
| static int idpf_check_reset_complete(struct idpf_hw *hw, |
| struct idpf_reset_reg *reset_reg) |
| { |
| struct idpf_adapter *adapter = hw->back; |
| int i; |
| |
| for (i = 0; i < 2000; i++) { |
| u32 reg_val = readl(reset_reg->rstat); |
| |
| /* 0xFFFFFFFF might be read if other side hasn't cleared the |
| * register for us yet and 0xFFFFFFFF is not a valid value for |
| * the register, so treat that as invalid. |
| */ |
| if (reg_val != 0xFFFFFFFF && (reg_val & reset_reg->rstat_m)) |
| return 0; |
| |
| usleep_range(5000, 10000); |
| } |
| |
| dev_warn(&adapter->pdev->dev, "Device reset timeout!\n"); |
| /* Clear the reset flag unconditionally here since the reset |
| * technically isn't in progress anymore from the driver's perspective |
| */ |
| clear_bit(IDPF_HR_RESET_IN_PROG, adapter->flags); |
| |
| return -EBUSY; |
| } |
| |
| /** |
| * idpf_set_vport_state - Set the vport state to be after the reset |
| * @adapter: Driver specific private structure |
| */ |
| static void idpf_set_vport_state(struct idpf_adapter *adapter) |
| { |
| u16 i; |
| |
| for (i = 0; i < adapter->max_vports; i++) { |
| struct idpf_netdev_priv *np; |
| |
| if (!adapter->netdevs[i]) |
| continue; |
| |
| np = netdev_priv(adapter->netdevs[i]); |
| if (np->state == __IDPF_VPORT_UP) |
| set_bit(IDPF_VPORT_UP_REQUESTED, |
| adapter->vport_config[i]->flags); |
| } |
| } |
| |
| /** |
| * idpf_init_hard_reset - Initiate a hardware reset |
| * @adapter: Driver specific private structure |
| * |
| * Deallocate the vports and all the resources associated with them and |
| * reallocate. Also reinitialize the mailbox. Return 0 on success, |
| * negative on failure. |
| */ |
| static int idpf_init_hard_reset(struct idpf_adapter *adapter) |
| { |
| struct idpf_reg_ops *reg_ops = &adapter->dev_ops.reg_ops; |
| struct device *dev = &adapter->pdev->dev; |
| struct net_device *netdev; |
| int err; |
| u16 i; |
| |
| mutex_lock(&adapter->vport_ctrl_lock); |
| |
| dev_info(dev, "Device HW Reset initiated\n"); |
| |
| /* Avoid TX hangs on reset */ |
| for (i = 0; i < adapter->max_vports; i++) { |
| netdev = adapter->netdevs[i]; |
| if (!netdev) |
| continue; |
| |
| netif_carrier_off(netdev); |
| netif_tx_disable(netdev); |
| } |
| |
| /* Prepare for reset */ |
| if (test_and_clear_bit(IDPF_HR_DRV_LOAD, adapter->flags)) { |
| reg_ops->trigger_reset(adapter, IDPF_HR_DRV_LOAD); |
| } else if (test_and_clear_bit(IDPF_HR_FUNC_RESET, adapter->flags)) { |
| bool is_reset = idpf_is_reset_detected(adapter); |
| |
| idpf_set_vport_state(adapter); |
| idpf_vc_core_deinit(adapter); |
| if (!is_reset) |
| reg_ops->trigger_reset(adapter, IDPF_HR_FUNC_RESET); |
| idpf_deinit_dflt_mbx(adapter); |
| } else { |
| dev_err(dev, "Unhandled hard reset cause\n"); |
| err = -EBADRQC; |
| goto unlock_mutex; |
| } |
| |
| /* Wait for reset to complete */ |
| err = idpf_check_reset_complete(&adapter->hw, &adapter->reset_reg); |
| if (err) { |
| dev_err(dev, "The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x%x\n", |
| adapter->state); |
| goto unlock_mutex; |
| } |
| |
| /* Reset is complete and so start building the driver resources again */ |
| err = idpf_init_dflt_mbx(adapter); |
| if (err) { |
| dev_err(dev, "Failed to initialize default mailbox: %d\n", err); |
| goto unlock_mutex; |
| } |
| |
| queue_delayed_work(adapter->mbx_wq, &adapter->mbx_task, 0); |
| |
| /* Initialize the state machine, also allocate memory and request |
| * resources |
| */ |
| err = idpf_vc_core_init(adapter); |
| if (err) { |
| idpf_deinit_dflt_mbx(adapter); |
| goto unlock_mutex; |
| } |
| |
| /* Wait till all the vports are initialized to release the reset lock, |
| * else user space callbacks may access uninitialized vports |
| */ |
| while (test_bit(IDPF_HR_RESET_IN_PROG, adapter->flags)) |
| msleep(100); |
| |
| unlock_mutex: |
| mutex_unlock(&adapter->vport_ctrl_lock); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_vc_event_task - Handle virtchannel event logic |
| * @work: work queue struct |
| */ |
| void idpf_vc_event_task(struct work_struct *work) |
| { |
| struct idpf_adapter *adapter; |
| |
| adapter = container_of(work, struct idpf_adapter, vc_event_task.work); |
| |
| if (test_bit(IDPF_REMOVE_IN_PROG, adapter->flags)) |
| return; |
| |
| if (test_bit(IDPF_HR_FUNC_RESET, adapter->flags) || |
| test_bit(IDPF_HR_DRV_LOAD, adapter->flags)) { |
| set_bit(IDPF_HR_RESET_IN_PROG, adapter->flags); |
| idpf_init_hard_reset(adapter); |
| } |
| } |
| |
| /** |
| * idpf_initiate_soft_reset - Initiate a software reset |
| * @vport: virtual port data struct |
| * @reset_cause: reason for the soft reset |
| * |
| * Soft reset only reallocs vport queue resources. Returns 0 on success, |
| * negative on failure. |
| */ |
| int idpf_initiate_soft_reset(struct idpf_vport *vport, |
| enum idpf_vport_reset_cause reset_cause) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(vport->netdev); |
| enum idpf_vport_state current_state = np->state; |
| struct idpf_adapter *adapter = vport->adapter; |
| struct idpf_vport *new_vport; |
| int err; |
| |
| /* If the system is low on memory, we can end up in bad state if we |
| * free all the memory for queue resources and try to allocate them |
| * again. Instead, we can pre-allocate the new resources before doing |
| * anything and bailing if the alloc fails. |
| * |
| * Make a clone of the existing vport to mimic its current |
| * configuration, then modify the new structure with any requested |
| * changes. Once the allocation of the new resources is done, stop the |
| * existing vport and copy the configuration to the main vport. If an |
| * error occurred, the existing vport will be untouched. |
| * |
| */ |
| new_vport = kzalloc(sizeof(*vport), GFP_KERNEL); |
| if (!new_vport) |
| return -ENOMEM; |
| |
| /* This purposely avoids copying the end of the struct because it |
| * contains wait_queues and mutexes and other stuff we don't want to |
| * mess with. Nothing below should use those variables from new_vport |
| * and should instead always refer to them in vport if they need to. |
| */ |
| memcpy(new_vport, vport, offsetof(struct idpf_vport, link_speed_mbps)); |
| |
| /* Adjust resource parameters prior to reallocating resources */ |
| switch (reset_cause) { |
| case IDPF_SR_Q_CHANGE: |
| err = idpf_vport_adjust_qs(new_vport); |
| if (err) |
| goto free_vport; |
| break; |
| case IDPF_SR_Q_DESC_CHANGE: |
| /* Update queue parameters before allocating resources */ |
| idpf_vport_calc_num_q_desc(new_vport); |
| break; |
| case IDPF_SR_MTU_CHANGE: |
| case IDPF_SR_RSC_CHANGE: |
| break; |
| default: |
| dev_err(&adapter->pdev->dev, "Unhandled soft reset cause\n"); |
| err = -EINVAL; |
| goto free_vport; |
| } |
| |
| if (current_state <= __IDPF_VPORT_DOWN) { |
| idpf_send_delete_queues_msg(vport); |
| } else { |
| set_bit(IDPF_VPORT_DEL_QUEUES, vport->flags); |
| idpf_vport_stop(vport); |
| } |
| |
| idpf_deinit_rss(vport); |
| /* We're passing in vport here because we need its wait_queue |
| * to send a message and it should be getting all the vport |
| * config data out of the adapter but we need to be careful not |
| * to add code to add_queues to change the vport config within |
| * vport itself as it will be wiped with a memcpy later. |
| */ |
| err = idpf_send_add_queues_msg(vport, new_vport->num_txq, |
| new_vport->num_complq, |
| new_vport->num_rxq, |
| new_vport->num_bufq); |
| if (err) |
| goto err_reset; |
| |
| /* Same comment as above regarding avoiding copying the wait_queues and |
| * mutexes applies here. We do not want to mess with those if possible. |
| */ |
| memcpy(vport, new_vport, offsetof(struct idpf_vport, link_speed_mbps)); |
| |
| if (reset_cause == IDPF_SR_Q_CHANGE) |
| idpf_vport_alloc_vec_indexes(vport); |
| |
| err = idpf_set_real_num_queues(vport); |
| if (err) |
| goto err_open; |
| |
| if (current_state == __IDPF_VPORT_UP) |
| err = idpf_vport_open(vport); |
| |
| kfree(new_vport); |
| |
| return err; |
| |
| err_reset: |
| idpf_send_add_queues_msg(vport, vport->num_txq, vport->num_complq, |
| vport->num_rxq, vport->num_bufq); |
| |
| err_open: |
| if (current_state == __IDPF_VPORT_UP) |
| idpf_vport_open(vport); |
| |
| free_vport: |
| kfree(new_vport); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_addr_sync - Callback for dev_(mc|uc)_sync to add address |
| * @netdev: the netdevice |
| * @addr: address to add |
| * |
| * Called by __dev_(mc|uc)_sync when an address needs to be added. We call |
| * __dev_(uc|mc)_sync from .set_rx_mode. Kernel takes addr_list_lock spinlock |
| * meaning we cannot sleep in this context. Due to this, we have to add the |
| * filter and send the virtchnl message asynchronously without waiting for the |
| * response from the other side. We won't know whether or not the operation |
| * actually succeeded until we get the message back. Returns 0 on success, |
| * negative on failure. |
| */ |
| static int idpf_addr_sync(struct net_device *netdev, const u8 *addr) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| |
| return idpf_add_mac_filter(np->vport, np, addr, true); |
| } |
| |
| /** |
| * idpf_addr_unsync - Callback for dev_(mc|uc)_sync to remove address |
| * @netdev: the netdevice |
| * @addr: address to add |
| * |
| * Called by __dev_(mc|uc)_sync when an address needs to be added. We call |
| * __dev_(uc|mc)_sync from .set_rx_mode. Kernel takes addr_list_lock spinlock |
| * meaning we cannot sleep in this context. Due to this we have to delete the |
| * filter and send the virtchnl message asynchronously without waiting for the |
| * return from the other side. We won't know whether or not the operation |
| * actually succeeded until we get the message back. Returns 0 on success, |
| * negative on failure. |
| */ |
| static int idpf_addr_unsync(struct net_device *netdev, const u8 *addr) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| |
| /* Under some circumstances, we might receive a request to delete |
| * our own device address from our uc list. Because we store the |
| * device address in the VSI's MAC filter list, we need to ignore |
| * such requests and not delete our device address from this list. |
| */ |
| if (ether_addr_equal(addr, netdev->dev_addr)) |
| return 0; |
| |
| idpf_del_mac_filter(np->vport, np, addr, true); |
| |
| return 0; |
| } |
| |
| /** |
| * idpf_set_rx_mode - NDO callback to set the netdev filters |
| * @netdev: network interface device structure |
| * |
| * Stack takes addr_list_lock spinlock before calling our .set_rx_mode. We |
| * cannot sleep in this context. |
| */ |
| static void idpf_set_rx_mode(struct net_device *netdev) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport_user_config_data *config_data; |
| struct idpf_adapter *adapter; |
| bool changed = false; |
| struct device *dev; |
| int err; |
| |
| adapter = np->adapter; |
| dev = &adapter->pdev->dev; |
| |
| if (idpf_is_cap_ena(adapter, IDPF_OTHER_CAPS, VIRTCHNL2_CAP_MACFILTER)) { |
| __dev_uc_sync(netdev, idpf_addr_sync, idpf_addr_unsync); |
| __dev_mc_sync(netdev, idpf_addr_sync, idpf_addr_unsync); |
| } |
| |
| if (!idpf_is_cap_ena(adapter, IDPF_OTHER_CAPS, VIRTCHNL2_CAP_PROMISC)) |
| return; |
| |
| config_data = &adapter->vport_config[np->vport_idx]->user_config; |
| /* IFF_PROMISC enables both unicast and multicast promiscuous, |
| * while IFF_ALLMULTI only enables multicast such that: |
| * |
| * promisc + allmulti = unicast | multicast |
| * promisc + !allmulti = unicast | multicast |
| * !promisc + allmulti = multicast |
| */ |
| if ((netdev->flags & IFF_PROMISC) && |
| !test_and_set_bit(__IDPF_PROMISC_UC, config_data->user_flags)) { |
| changed = true; |
| dev_info(&adapter->pdev->dev, "Entering promiscuous mode\n"); |
| if (!test_and_set_bit(__IDPF_PROMISC_MC, adapter->flags)) |
| dev_info(dev, "Entering multicast promiscuous mode\n"); |
| } |
| |
| if (!(netdev->flags & IFF_PROMISC) && |
| test_and_clear_bit(__IDPF_PROMISC_UC, config_data->user_flags)) { |
| changed = true; |
| dev_info(dev, "Leaving promiscuous mode\n"); |
| } |
| |
| if (netdev->flags & IFF_ALLMULTI && |
| !test_and_set_bit(__IDPF_PROMISC_MC, config_data->user_flags)) { |
| changed = true; |
| dev_info(dev, "Entering multicast promiscuous mode\n"); |
| } |
| |
| if (!(netdev->flags & (IFF_ALLMULTI | IFF_PROMISC)) && |
| test_and_clear_bit(__IDPF_PROMISC_MC, config_data->user_flags)) { |
| changed = true; |
| dev_info(dev, "Leaving multicast promiscuous mode\n"); |
| } |
| |
| if (!changed) |
| return; |
| |
| err = idpf_set_promiscuous(adapter, config_data, np->vport_id); |
| if (err) |
| dev_err(dev, "Failed to set promiscuous mode: %d\n", err); |
| } |
| |
| /** |
| * idpf_vport_manage_rss_lut - disable/enable RSS |
| * @vport: the vport being changed |
| * |
| * In the event of disable request for RSS, this function will zero out RSS |
| * LUT, while in the event of enable request for RSS, it will reconfigure RSS |
| * LUT with the default LUT configuration. |
| */ |
| static int idpf_vport_manage_rss_lut(struct idpf_vport *vport) |
| { |
| bool ena = idpf_is_feature_ena(vport, NETIF_F_RXHASH); |
| struct idpf_rss_data *rss_data; |
| u16 idx = vport->idx; |
| int lut_size; |
| |
| rss_data = &vport->adapter->vport_config[idx]->user_config.rss_data; |
| lut_size = rss_data->rss_lut_size * sizeof(u32); |
| |
| if (ena) { |
| /* This will contain the default or user configured LUT */ |
| memcpy(rss_data->rss_lut, rss_data->cached_lut, lut_size); |
| } else { |
| /* Save a copy of the current LUT to be restored later if |
| * requested. |
| */ |
| memcpy(rss_data->cached_lut, rss_data->rss_lut, lut_size); |
| |
| /* Zero out the current LUT to disable */ |
| memset(rss_data->rss_lut, 0, lut_size); |
| } |
| |
| return idpf_config_rss(vport); |
| } |
| |
| /** |
| * idpf_set_features - set the netdev feature flags |
| * @netdev: ptr to the netdev being adjusted |
| * @features: the feature set that the stack is suggesting |
| */ |
| static int idpf_set_features(struct net_device *netdev, |
| netdev_features_t features) |
| { |
| netdev_features_t changed = netdev->features ^ features; |
| struct idpf_adapter *adapter; |
| struct idpf_vport *vport; |
| int err = 0; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| adapter = vport->adapter; |
| |
| if (idpf_is_reset_in_prog(adapter)) { |
| dev_err(&adapter->pdev->dev, "Device is resetting, changing netdev features temporarily unavailable.\n"); |
| err = -EBUSY; |
| goto unlock_mutex; |
| } |
| |
| if (changed & NETIF_F_RXHASH) { |
| netdev->features ^= NETIF_F_RXHASH; |
| err = idpf_vport_manage_rss_lut(vport); |
| if (err) |
| goto unlock_mutex; |
| } |
| |
| if (changed & NETIF_F_GRO_HW) { |
| netdev->features ^= NETIF_F_GRO_HW; |
| err = idpf_initiate_soft_reset(vport, IDPF_SR_RSC_CHANGE); |
| if (err) |
| goto unlock_mutex; |
| } |
| |
| if (changed & NETIF_F_LOOPBACK) { |
| netdev->features ^= NETIF_F_LOOPBACK; |
| err = idpf_send_ena_dis_loopback_msg(vport); |
| } |
| |
| unlock_mutex: |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_open - Called when a network interface becomes active |
| * @netdev: network interface device structure |
| * |
| * The open entry point is called when a network interface is made |
| * active by the system (IFF_UP). At this point all resources needed |
| * for transmit and receive operations are allocated, the interrupt |
| * handler is registered with the OS, the netdev watchdog is enabled, |
| * and the stack is notified that the interface is ready. |
| * |
| * Returns 0 on success, negative value on failure |
| */ |
| static int idpf_open(struct net_device *netdev) |
| { |
| struct idpf_vport *vport; |
| int err; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| err = idpf_vport_open(vport); |
| |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_change_mtu - NDO callback to change the MTU |
| * @netdev: network interface device structure |
| * @new_mtu: new value for maximum frame size |
| * |
| * Returns 0 on success, negative on failure |
| */ |
| static int idpf_change_mtu(struct net_device *netdev, int new_mtu) |
| { |
| struct idpf_vport *vport; |
| int err; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| WRITE_ONCE(netdev->mtu, new_mtu); |
| |
| err = idpf_initiate_soft_reset(vport, IDPF_SR_MTU_CHANGE); |
| |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_features_check - Validate packet conforms to limits |
| * @skb: skb buffer |
| * @netdev: This port's netdev |
| * @features: Offload features that the stack believes apply |
| */ |
| static netdev_features_t idpf_features_check(struct sk_buff *skb, |
| struct net_device *netdev, |
| netdev_features_t features) |
| { |
| struct idpf_vport *vport = idpf_netdev_to_vport(netdev); |
| struct idpf_adapter *adapter = vport->adapter; |
| size_t len; |
| |
| /* No point in doing any of this if neither checksum nor GSO are |
| * being requested for this frame. We can rule out both by just |
| * checking for CHECKSUM_PARTIAL |
| */ |
| if (skb->ip_summed != CHECKSUM_PARTIAL) |
| return features; |
| |
| /* We cannot support GSO if the MSS is going to be less than |
| * 88 bytes. If it is then we need to drop support for GSO. |
| */ |
| if (skb_is_gso(skb) && |
| (skb_shinfo(skb)->gso_size < IDPF_TX_TSO_MIN_MSS)) |
| features &= ~NETIF_F_GSO_MASK; |
| |
| /* Ensure MACLEN is <= 126 bytes (63 words) and not an odd size */ |
| len = skb_network_offset(skb); |
| if (unlikely(len & ~(126))) |
| goto unsupported; |
| |
| len = skb_network_header_len(skb); |
| if (unlikely(len > idpf_get_max_tx_hdr_size(adapter))) |
| goto unsupported; |
| |
| if (!skb->encapsulation) |
| return features; |
| |
| /* L4TUNLEN can support 127 words */ |
| len = skb_inner_network_header(skb) - skb_transport_header(skb); |
| if (unlikely(len & ~(127 * 2))) |
| goto unsupported; |
| |
| /* IPLEN can support at most 127 dwords */ |
| len = skb_inner_network_header_len(skb); |
| if (unlikely(len > idpf_get_max_tx_hdr_size(adapter))) |
| goto unsupported; |
| |
| /* No need to validate L4LEN as TCP is the only protocol with a |
| * a flexible value and we support all possible values supported |
| * by TCP, which is at most 15 dwords |
| */ |
| |
| return features; |
| |
| unsupported: |
| return features & ~(NETIF_F_CSUM_MASK | NETIF_F_GSO_MASK); |
| } |
| |
| /** |
| * idpf_set_mac - NDO callback to set port mac address |
| * @netdev: network interface device structure |
| * @p: pointer to an address structure |
| * |
| * Returns 0 on success, negative on failure |
| **/ |
| static int idpf_set_mac(struct net_device *netdev, void *p) |
| { |
| struct idpf_netdev_priv *np = netdev_priv(netdev); |
| struct idpf_vport_config *vport_config; |
| struct sockaddr *addr = p; |
| struct idpf_vport *vport; |
| int err = 0; |
| |
| idpf_vport_ctrl_lock(netdev); |
| vport = idpf_netdev_to_vport(netdev); |
| |
| if (!idpf_is_cap_ena(vport->adapter, IDPF_OTHER_CAPS, |
| VIRTCHNL2_CAP_MACFILTER)) { |
| dev_info(&vport->adapter->pdev->dev, "Setting MAC address is not supported\n"); |
| err = -EOPNOTSUPP; |
| goto unlock_mutex; |
| } |
| |
| if (!is_valid_ether_addr(addr->sa_data)) { |
| dev_info(&vport->adapter->pdev->dev, "Invalid MAC address: %pM\n", |
| addr->sa_data); |
| err = -EADDRNOTAVAIL; |
| goto unlock_mutex; |
| } |
| |
| if (ether_addr_equal(netdev->dev_addr, addr->sa_data)) |
| goto unlock_mutex; |
| |
| vport_config = vport->adapter->vport_config[vport->idx]; |
| err = idpf_add_mac_filter(vport, np, addr->sa_data, false); |
| if (err) { |
| __idpf_del_mac_filter(vport_config, addr->sa_data); |
| goto unlock_mutex; |
| } |
| |
| if (is_valid_ether_addr(vport->default_mac_addr)) |
| idpf_del_mac_filter(vport, np, vport->default_mac_addr, false); |
| |
| ether_addr_copy(vport->default_mac_addr, addr->sa_data); |
| eth_hw_addr_set(netdev, addr->sa_data); |
| |
| unlock_mutex: |
| idpf_vport_ctrl_unlock(netdev); |
| |
| return err; |
| } |
| |
| /** |
| * idpf_alloc_dma_mem - Allocate dma memory |
| * @hw: pointer to hw struct |
| * @mem: pointer to dma_mem struct |
| * @size: size of the memory to allocate |
| */ |
| void *idpf_alloc_dma_mem(struct idpf_hw *hw, struct idpf_dma_mem *mem, u64 size) |
| { |
| struct idpf_adapter *adapter = hw->back; |
| size_t sz = ALIGN(size, 4096); |
| |
| mem->va = dma_alloc_coherent(&adapter->pdev->dev, sz, |
| &mem->pa, GFP_KERNEL); |
| mem->size = sz; |
| |
| return mem->va; |
| } |
| |
| /** |
| * idpf_free_dma_mem - Free the allocated dma memory |
| * @hw: pointer to hw struct |
| * @mem: pointer to dma_mem struct |
| */ |
| void idpf_free_dma_mem(struct idpf_hw *hw, struct idpf_dma_mem *mem) |
| { |
| struct idpf_adapter *adapter = hw->back; |
| |
| dma_free_coherent(&adapter->pdev->dev, mem->size, |
| mem->va, mem->pa); |
| mem->size = 0; |
| mem->va = NULL; |
| mem->pa = 0; |
| } |
| |
| static const struct net_device_ops idpf_netdev_ops = { |
| .ndo_open = idpf_open, |
| .ndo_stop = idpf_stop, |
| .ndo_start_xmit = idpf_tx_start, |
| .ndo_features_check = idpf_features_check, |
| .ndo_set_rx_mode = idpf_set_rx_mode, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_set_mac_address = idpf_set_mac, |
| .ndo_change_mtu = idpf_change_mtu, |
| .ndo_get_stats64 = idpf_get_stats64, |
| .ndo_set_features = idpf_set_features, |
| .ndo_tx_timeout = idpf_tx_timeout, |
| }; |