drivers/net/ethernet/qlogic/qed/qed_dev_api.h - linux - Git at Google

 /* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
 /* QLogic qed NIC Driver
  * Copyright (c) 2015-2017  QLogic Corporation
  * Copyright (c) 2019-2020 Marvell International Ltd.
  */

 #ifndef _QED_DEV_API_H
 #define _QED_DEV_API_H

 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/qed/qed_chain.h>
 #include <linux/qed/qed_if.h>
 #include "qed_int.h"

 /**
  * qed_init_dp(): Initialize the debug level.
  *
  * @cdev: Qed dev pointer.
  * @dp_module: Module debug parameter.
  * @dp_level: Module debug level.
  *
  * Return: Void.
  */
 void qed_init_dp(struct qed_dev *cdev,
 		 u32 dp_module,
 		 u8 dp_level);

 /**
  * qed_init_struct(): Initialize the device structure to
  *                    its defaults.
  *
  * @cdev: Qed dev pointer.
  *
  * Return: Void.
  */
 void qed_init_struct(struct qed_dev *cdev);

 /**
  * qed_resc_free: Free device resources.
  *
  * @cdev: Qed dev pointer.
  *
  * Return: Void.
  */
 void qed_resc_free(struct qed_dev *cdev);

 /**
  * qed_resc_alloc(): Alloc device resources.
  *
  * @cdev: Qed dev pointer.
  *
  * Return: Int.
  */
 int qed_resc_alloc(struct qed_dev *cdev);

 /**
  * qed_resc_setup(): Setup device resources.
  *
  * @cdev: Qed dev pointer.
  *
  * Return: Void.
  */
 void qed_resc_setup(struct qed_dev *cdev);

 enum qed_override_force_load {
 	QED_OVERRIDE_FORCE_LOAD_NONE,
 	QED_OVERRIDE_FORCE_LOAD_ALWAYS,
 	QED_OVERRIDE_FORCE_LOAD_NEVER,
 };

 struct qed_drv_load_params {
 	/* Indicates whether the driver is running over a crash kernel.
 	 * As part of the load request, this will be used for providing the
 	 * driver role to the MFW.
 	 * In case of a crash kernel over PDA - this should be set to false.
 	 */
 	bool is_crash_kernel;

 	/* The timeout value that the MFW should use when locking the engine for
 	 * the driver load process.
 	 * A value of '0' means the default value, and '255' means no timeout.
 	 */
 	u8 mfw_timeout_val;
 #define QED_LOAD_REQ_LOCK_TO_DEFAULT    0
 #define QED_LOAD_REQ_LOCK_TO_NONE       255

 	/* Avoid engine reset when first PF loads on it */
 	bool avoid_eng_reset;

 	/* Allow overriding the default force load behavior */
 	enum qed_override_force_load override_force_load;
 };

 struct qed_hw_init_params {
 	/* Tunneling parameters */
 	struct qed_tunnel_info *p_tunn;

 	bool b_hw_start;

 	/* Interrupt mode [msix, inta, etc.] to use */
 	enum qed_int_mode int_mode;

 	/* NPAR tx switching to be used for vports for tx-switching */
 	bool allow_npar_tx_switch;

 	/* Binary fw data pointer in binary fw file */
 	const u8 *bin_fw_data;

 	/* Driver load parameters */
 	struct qed_drv_load_params *p_drv_load_params;
 };

 /**
  * qed_hw_init(): Init Qed hardware.
  *
  * @cdev: Qed dev pointer.
  * @p_params: Pointers to params.
  *
  * Return: Int.
  */
 int qed_hw_init(struct qed_dev *cdev, struct qed_hw_init_params *p_params);

 /**
  * qed_hw_timers_stop_all(): Stop the timers HW block.
  *
  * @cdev: Qed dev pointer.
  *
  * Return: void.
  */
 void qed_hw_timers_stop_all(struct qed_dev *cdev);

 /**
  * qed_hw_stop(): Stop Qed hardware.
  *
  * @cdev: Qed dev pointer.
  *
  * Return: int.
  */
 int qed_hw_stop(struct qed_dev *cdev);

 /**
  * qed_hw_stop_fastpath(): Should be called incase
  *		           slowpath is still required for the device,
  *		           but fastpath is not.
  *
  * @cdev: Qed dev pointer.
  *
  * Return: Int.
  */
 int qed_hw_stop_fastpath(struct qed_dev *cdev);

 /**
  * qed_hw_start_fastpath(): Restart fastpath traffic,
  *		            only if hw_stop_fastpath was called.
  *
  * @p_hwfn: HW device data.
  *
  * Return: Int.
  */
 int qed_hw_start_fastpath(struct qed_hwfn *p_hwfn);

 /**
  * qed_hw_prepare(): Prepare Qed hardware.
  *
  * @cdev: Qed dev pointer.
  * @personality: Personality to initialize.
  *
  * Return: Int.
  */
 int qed_hw_prepare(struct qed_dev *cdev,
 		   int personality);

 /**
  * qed_hw_remove(): Remove Qed hardware.
  *
  * @cdev: Qed dev pointer.
  *
  * Return: Void.
  */
 void qed_hw_remove(struct qed_dev *cdev);

 /**
  * qed_ptt_acquire(): Allocate a PTT window.
  *
  * @p_hwfn: HW device data.
  *
  * Return: struct qed_ptt.
  *
  * Should be called at the entry point to the driver (at the beginning of an
  * exported function).
  */
 struct qed_ptt *qed_ptt_acquire(struct qed_hwfn *p_hwfn);

 /**
  * qed_ptt_acquire_context(): Allocate a PTT window honoring the context
  *			      atomicy.
  *
  * @p_hwfn: HW device data.
  * @is_atomic: Hint from the caller - if the func can sleep or not.
  *
  * Context: The function should not sleep in case is_atomic == true.
  * Return: struct qed_ptt.
  *
  * Should be called at the entry point to the driver
  * (at the beginning of an exported function).
  */
 struct qed_ptt *qed_ptt_acquire_context(struct qed_hwfn *p_hwfn,
 					bool is_atomic);

 /**
  * qed_ptt_release(): Release PTT Window.
  *
  * @p_hwfn: HW device data.
  * @p_ptt: P_ptt.
  *
  * Return: Void.
  *
  * Should be called at the end of a flow - at the end of the function that
  * acquired the PTT.
  */
 void qed_ptt_release(struct qed_hwfn *p_hwfn,
 		     struct qed_ptt *p_ptt);
 void qed_reset_vport_stats(struct qed_dev *cdev);

 enum qed_dmae_address_type_t {
 	QED_DMAE_ADDRESS_HOST_VIRT,
 	QED_DMAE_ADDRESS_HOST_PHYS,
 	QED_DMAE_ADDRESS_GRC
 };

 /**
  * qed_dmae_host2grc(): Copy data from source addr to
  *                      dmae registers using the given ptt.
  *
  * @p_hwfn: HW device data.
  * @p_ptt: P_ptt.
  * @source_addr: Source address.
  * @grc_addr: GRC address (dmae_data_offset).
  * @size_in_dwords: Size.
  * @p_params: (default parameters will be used in case of NULL).
  *
  * Return: Int.
  */
 int
 qed_dmae_host2grc(struct qed_hwfn *p_hwfn,
 		  struct qed_ptt *p_ptt,
 		  u64 source_addr,
 		  u32 grc_addr,
 		  u32 size_in_dwords,
 		  struct qed_dmae_params *p_params);

  /**
  * qed_dmae_grc2host(): Read data from dmae data offset
  *                      to source address using the given ptt.
  *
  * @p_ptt: P_ptt.
  * @grc_addr: GRC address (dmae_data_offset).
  * @dest_addr: Destination Address.
  * @size_in_dwords: Size.
  * @p_params: (default parameters will be used in case of NULL).
  *
  * Return: Int.
  */
 int qed_dmae_grc2host(struct qed_hwfn *p_hwfn, struct qed_ptt *p_ptt,
 		      u32 grc_addr, dma_addr_t dest_addr, u32 size_in_dwords,
 		      struct qed_dmae_params *p_params);

 /**
  * qed_dmae_host2host(): Copy data from to source address
  *                       to a destination adrress (for SRIOV) using the given
  *                       ptt.
  *
  * @p_hwfn: HW device data.
  * @p_ptt: P_ptt.
  * @source_addr: Source address.
  * @dest_addr: Destination address.
  * @size_in_dwords: size.
  * @p_params: (default parameters will be used in case of NULL).
  *
  * Return: Int.
  */
 int qed_dmae_host2host(struct qed_hwfn *p_hwfn,
 		       struct qed_ptt *p_ptt,
 		       dma_addr_t source_addr,
 		       dma_addr_t dest_addr,
 		       u32 size_in_dwords, struct qed_dmae_params *p_params);

 int qed_chain_alloc(struct qed_dev *cdev, struct qed_chain *chain,
 		    struct qed_chain_init_params *params);
 void qed_chain_free(struct qed_dev *cdev, struct qed_chain *chain);

 /**
  * qed_fw_l2_queue(): Get absolute L2 queue ID.
  *
  * @p_hwfn: HW device data.
  * @src_id: Relative to p_hwfn.
  * @dst_id: Absolute per engine.
  *
  * Return: Int.
  */
 int qed_fw_l2_queue(struct qed_hwfn *p_hwfn,
 		    u16 src_id,
 		    u16 *dst_id);

 /**
  * qed_fw_vport(): Get absolute vport ID.
  *
  * @p_hwfn: HW device data.
  * @src_id: Relative to p_hwfn.
  * @dst_id: Absolute per engine.
  *
  * Return: Int.
  */
 int qed_fw_vport(struct qed_hwfn *p_hwfn,
 		 u8 src_id,
 		 u8 *dst_id);

 /**
  * qed_fw_rss_eng(): Get absolute RSS engine ID.
  *
  * @p_hwfn: HW device data.
  * @src_id: Relative to p_hwfn.
  * @dst_id: Absolute per engine.
  *
  * Return: Int.
  */
 int qed_fw_rss_eng(struct qed_hwfn *p_hwfn,
 		   u8 src_id,
 		   u8 *dst_id);

 /**
  * qed_llh_get_num_ppfid(): Return the allocated number of LLH filter
  *	                    banks that are allocated to the PF.
  *
  * @cdev: Qed dev pointer.
  *
  * Return: u8 Number of LLH filter banks.
  */
 u8 qed_llh_get_num_ppfid(struct qed_dev *cdev);

 enum qed_eng {
 	QED_ENG0,
 	QED_ENG1,
 	QED_BOTH_ENG,
 };

 /**
  * qed_llh_set_ppfid_affinity(): Set the engine affinity for the given
  *	                         LLH filter bank.
  *
  * @cdev: Qed dev pointer.
  * @ppfid: Relative within the allocated ppfids ('0' is the default one).
  * @eng: Engine.
  *
  * Return: Int.
  */
 int qed_llh_set_ppfid_affinity(struct qed_dev *cdev,
 			       u8 ppfid, enum qed_eng eng);

 /**
  * qed_llh_set_roce_affinity(): Set the RoCE engine affinity.
  *
  * @cdev: Qed dev pointer.
  * @eng: Engine.
  *
  * Return: Int.
  */
 int qed_llh_set_roce_affinity(struct qed_dev *cdev, enum qed_eng eng);

 /**
  * qed_llh_add_mac_filter(): Add a LLH MAC filter into the given filter
  *	                     bank.
  *
  * @cdev: Qed dev pointer.
  * @ppfid: Relative within the allocated ppfids ('0' is the default one).
  * @mac_addr: MAC to add.
  *
  * Return: Int.
  */
 int qed_llh_add_mac_filter(struct qed_dev *cdev,
 			   u8 ppfid, const u8 mac_addr[ETH_ALEN]);

 /**
  * qed_llh_remove_mac_filter(): Remove a LLH MAC filter from the given
  *	                        filter bank.
  *
  * @cdev: Qed dev pointer.
  * @ppfid: Ppfid.
  * @mac_addr: MAC to remove
  *
  * Return: Void.
  */
 void qed_llh_remove_mac_filter(struct qed_dev *cdev,
 			       u8 ppfid, u8 mac_addr[ETH_ALEN]);

 enum qed_llh_prot_filter_type_t {
 	QED_LLH_FILTER_ETHERTYPE,
 	QED_LLH_FILTER_TCP_SRC_PORT,
 	QED_LLH_FILTER_TCP_DEST_PORT,
 	QED_LLH_FILTER_TCP_SRC_AND_DEST_PORT,
 	QED_LLH_FILTER_UDP_SRC_PORT,
 	QED_LLH_FILTER_UDP_DEST_PORT,
 	QED_LLH_FILTER_UDP_SRC_AND_DEST_PORT
 };

 /**
  * qed_llh_add_protocol_filter(): Add a LLH protocol filter into the
  *	                          given filter bank.
  *
  * @cdev: Qed dev pointer.
  * @ppfid: Relative within the allocated ppfids ('0' is the default one).
  * @type: Type of filters and comparing.
  * @source_port_or_eth_type: Source port or ethertype to add.
  * @dest_port: Destination port to add.
  *
  * Return: Int.
  */
 int
 qed_llh_add_protocol_filter(struct qed_dev *cdev,
 			    u8 ppfid,
 			    enum qed_llh_prot_filter_type_t type,
 			    u16 source_port_or_eth_type, u16 dest_port);

 /**
  * qed_llh_remove_protocol_filter(): Remove a LLH protocol filter from
  *	                             the given filter bank.
  *
  * @cdev: Qed dev pointer.
  * @ppfid: Relative within the allocated ppfids ('0' is the default one).
  * @type: Type of filters and comparing.
  * @source_port_or_eth_type: Source port or ethertype to add.
  * @dest_port: Destination port to add.
  */
 void
 qed_llh_remove_protocol_filter(struct qed_dev *cdev,
 			       u8 ppfid,
 			       enum qed_llh_prot_filter_type_t type,
 			       u16 source_port_or_eth_type, u16 dest_port);

 /**
  * qed_final_cleanup(): Cleanup of previous driver remains prior to load.
  *
  * @p_hwfn: HW device data.
  * @p_ptt: P_ptt.
  * @id: For PF, engine-relative. For VF, PF-relative.
  * @is_vf: True iff cleanup is made for a VF.
  *
  * Return: Int.
  */
 int qed_final_cleanup(struct qed_hwfn *p_hwfn,
 		      struct qed_ptt *p_ptt, u16 id, bool is_vf);

 /**
  * qed_get_queue_coalesce(): Retrieve coalesce value for a given queue.
  *
  * @p_hwfn: HW device data.
  * @coal: Store coalesce value read from the hardware.
  * @handle: P_handle.
  *
  * Return: Int.
  **/
 int qed_get_queue_coalesce(struct qed_hwfn *p_hwfn, u16 *coal, void *handle);

 /**
  * qed_set_queue_coalesce(): Configure coalesce parameters for Rx and
  *    Tx queue. The fact that we can configure coalescing to up to 511, but on
  *    varying accuracy [the bigger the value the less accurate] up to a mistake
  *    of 3usec for the highest values.
  *    While the API allows setting coalescing per-qid, all queues sharing a SB
  *    should be in same range [i.e., either 0-0x7f, 0x80-0xff or 0x100-0x1ff]
  *    otherwise configuration would break.
  *
  * @rx_coal: Rx Coalesce value in micro seconds.
  * @tx_coal: TX Coalesce value in micro seconds.
  * @p_handle: P_handle.
  *
  * Return: Int.
  **/
 int
 qed_set_queue_coalesce(u16 rx_coal, u16 tx_coal, void *p_handle);

 /**
  * qed_pglueb_set_pfid_enable(): Enable or disable PCI BUS MASTER.
  *
  * @p_hwfn: HW device data.
  * @p_ptt: P_ptt.
  * @b_enable: True/False.
  *
  * Return: Int.
  */
 int qed_pglueb_set_pfid_enable(struct qed_hwfn *p_hwfn,
 			       struct qed_ptt *p_ptt, bool b_enable);

 /**
  * qed_db_recovery_add(): add doorbell information to the doorbell
  *                    recovery mechanism.
  *
  * @cdev: Qed dev pointer.
  * @db_addr: Doorbell address.
  * @db_data: Address of where db_data is stored.
  * @db_width: Doorbell is 32b pr 64b.
  * @db_space: Doorbell recovery addresses are user or kernel space.
  *
  * Return: Int.
  */
 int qed_db_recovery_add(struct qed_dev *cdev,
 			void __iomem *db_addr,
 			void *db_data,
 			enum qed_db_rec_width db_width,
 			enum qed_db_rec_space db_space);

 /**
  * qed_db_recovery_del() - remove doorbell information from the doorbell
  * recovery mechanism. db_data serves as key (db_addr is not unique).
  *
  * @cdev: Qed dev pointer.
  * @db_addr: doorbell address.
  * @db_data: address where db_data is stored. Serves as key for the
  *                  entry to delete.
  *
  * Return: Int.
  */
 int qed_db_recovery_del(struct qed_dev *cdev,
 			void __iomem *db_addr, void *db_data);

 const char *qed_hw_get_resc_name(enum qed_resources res_id);
 #endif
	/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause) */
	/* QLogic qed NIC Driver
	* Copyright (c) 2015-2017 QLogic Corporation
	* Copyright (c) 2019-2020 Marvell International Ltd.
	*/

	#ifndef _QED_DEV_API_H
	#define _QED_DEV_API_H

	#include <linux/types.h>
	#include <linux/kernel.h>
	#include <linux/slab.h>
	#include <linux/qed/qed_chain.h>
	#include <linux/qed/qed_if.h>
	#include "qed_int.h"

	/**
	* qed_init_dp(): Initialize the debug level.
	*
	* @cdev: Qed dev pointer.
	* @dp_module: Module debug parameter.
	* @dp_level: Module debug level.
	*
	* Return: Void.
	*/
	void qed_init_dp(struct qed_dev *cdev,
	u32 dp_module,
	u8 dp_level);

	/**
	* qed_init_struct(): Initialize the device structure to
	* its defaults.
	*
	* @cdev: Qed dev pointer.
	*
	* Return: Void.
	*/
	void qed_init_struct(struct qed_dev *cdev);

	/**
	* qed_resc_free: Free device resources.
	*
	* @cdev: Qed dev pointer.
	*
	* Return: Void.
	*/
	void qed_resc_free(struct qed_dev *cdev);

	/**
	* qed_resc_alloc(): Alloc device resources.
	*
	* @cdev: Qed dev pointer.
	*
	* Return: Int.
	*/
	int qed_resc_alloc(struct qed_dev *cdev);

	/**
	* qed_resc_setup(): Setup device resources.
	*
	* @cdev: Qed dev pointer.
	*
	* Return: Void.
	*/
	void qed_resc_setup(struct qed_dev *cdev);

	enum qed_override_force_load {
	QED_OVERRIDE_FORCE_LOAD_NONE,
	QED_OVERRIDE_FORCE_LOAD_ALWAYS,
	QED_OVERRIDE_FORCE_LOAD_NEVER,
	};

	struct qed_drv_load_params {
	/* Indicates whether the driver is running over a crash kernel.
	* As part of the load request, this will be used for providing the
	* driver role to the MFW.
	* In case of a crash kernel over PDA - this should be set to false.
	*/
	bool is_crash_kernel;

	/* The timeout value that the MFW should use when locking the engine for
	* the driver load process.
	* A value of '0' means the default value, and '255' means no timeout.
	*/
	u8 mfw_timeout_val;
	#define QED_LOAD_REQ_LOCK_TO_DEFAULT 0
	#define QED_LOAD_REQ_LOCK_TO_NONE 255

	/* Avoid engine reset when first PF loads on it */
	bool avoid_eng_reset;

	/* Allow overriding the default force load behavior */
	enum qed_override_force_load override_force_load;
	};

	struct qed_hw_init_params {
	/* Tunneling parameters */
	struct qed_tunnel_info *p_tunn;

	bool b_hw_start;

	/* Interrupt mode [msix, inta, etc.] to use */
	enum qed_int_mode int_mode;

	/* NPAR tx switching to be used for vports for tx-switching */
	bool allow_npar_tx_switch;

	/* Binary fw data pointer in binary fw file */
	const u8 *bin_fw_data;

	/* Driver load parameters */
	struct qed_drv_load_params *p_drv_load_params;
	};

	/**
	* qed_hw_init(): Init Qed hardware.
	*
	* @cdev: Qed dev pointer.
	* @p_params: Pointers to params.
	*
	* Return: Int.
	*/
	int qed_hw_init(struct qed_dev cdev, struct qed_hw_init_params p_params);

	/**
	* qed_hw_timers_stop_all(): Stop the timers HW block.
	*
	* @cdev: Qed dev pointer.
	*
	* Return: void.
	*/
	void qed_hw_timers_stop_all(struct qed_dev *cdev);

	/**
	* qed_hw_stop(): Stop Qed hardware.
	*
	* @cdev: Qed dev pointer.
	*
	* Return: int.
	*/
	int qed_hw_stop(struct qed_dev *cdev);

	/**
	* qed_hw_stop_fastpath(): Should be called incase
	* slowpath is still required for the device,
	* but fastpath is not.
	*
	* @cdev: Qed dev pointer.
	*
	* Return: Int.
	*/
	int qed_hw_stop_fastpath(struct qed_dev *cdev);

	/**
	* qed_hw_start_fastpath(): Restart fastpath traffic,
	* only if hw_stop_fastpath was called.
	*
	* @p_hwfn: HW device data.
	*
	* Return: Int.
	*/
	int qed_hw_start_fastpath(struct qed_hwfn *p_hwfn);

	/**
	* qed_hw_prepare(): Prepare Qed hardware.
	*
	* @cdev: Qed dev pointer.
	* @personality: Personality to initialize.
	*
	* Return: Int.
	*/
	int qed_hw_prepare(struct qed_dev *cdev,
	int personality);

	/**
	* qed_hw_remove(): Remove Qed hardware.
	*
	* @cdev: Qed dev pointer.
	*
	* Return: Void.
	*/
	void qed_hw_remove(struct qed_dev *cdev);

	/**
	* qed_ptt_acquire(): Allocate a PTT window.
	*
	* @p_hwfn: HW device data.
	*
	* Return: struct qed_ptt.
	*
	* Should be called at the entry point to the driver (at the beginning of an
	* exported function).
	*/
	struct qed_ptt qed_ptt_acquire(struct qed_hwfn p_hwfn);

	/**
	* qed_ptt_acquire_context(): Allocate a PTT window honoring the context
	* atomicy.
	*
	* @p_hwfn: HW device data.
	* @is_atomic: Hint from the caller - if the func can sleep or not.
	*
	* Context: The function should not sleep in case is_atomic == true.
	* Return: struct qed_ptt.
	*
	* Should be called at the entry point to the driver
	* (at the beginning of an exported function).
	*/
	struct qed_ptt qed_ptt_acquire_context(struct qed_hwfn p_hwfn,
	bool is_atomic);

	/**
	* qed_ptt_release(): Release PTT Window.
	*
	* @p_hwfn: HW device data.
	* @p_ptt: P_ptt.
	*
	* Return: Void.
	*
	* Should be called at the end of a flow - at the end of the function that
	* acquired the PTT.
	*/
	void qed_ptt_release(struct qed_hwfn *p_hwfn,
	struct qed_ptt *p_ptt);
	void qed_reset_vport_stats(struct qed_dev *cdev);

	enum qed_dmae_address_type_t {
	QED_DMAE_ADDRESS_HOST_VIRT,
	QED_DMAE_ADDRESS_HOST_PHYS,
	QED_DMAE_ADDRESS_GRC
	};

	/**
	* qed_dmae_host2grc(): Copy data from source addr to
	* dmae registers using the given ptt.
	*
	* @p_hwfn: HW device data.
	* @p_ptt: P_ptt.
	* @source_addr: Source address.
	* @grc_addr: GRC address (dmae_data_offset).
	* @size_in_dwords: Size.
	* @p_params: (default parameters will be used in case of NULL).
	*
	* Return: Int.
	*/
	int
	qed_dmae_host2grc(struct qed_hwfn *p_hwfn,
	struct qed_ptt *p_ptt,
	u64 source_addr,
	u32 grc_addr,
	u32 size_in_dwords,
	struct qed_dmae_params *p_params);

	/**
	* qed_dmae_grc2host(): Read data from dmae data offset
	* to source address using the given ptt.
	*
	* @p_ptt: P_ptt.
	* @grc_addr: GRC address (dmae_data_offset).
	* @dest_addr: Destination Address.
	* @size_in_dwords: Size.
	* @p_params: (default parameters will be used in case of NULL).
	*
	* Return: Int.
	*/
	int qed_dmae_grc2host(struct qed_hwfn p_hwfn, struct qed_ptt p_ptt,
	u32 grc_addr, dma_addr_t dest_addr, u32 size_in_dwords,
	struct qed_dmae_params *p_params);

	/**
	* qed_dmae_host2host(): Copy data from to source address
	* to a destination adrress (for SRIOV) using the given
	* ptt.
	*
	* @p_hwfn: HW device data.
	* @p_ptt: P_ptt.
	* @source_addr: Source address.
	* @dest_addr: Destination address.
	* @size_in_dwords: size.
	* @p_params: (default parameters will be used in case of NULL).
	*
	* Return: Int.
	*/
	int qed_dmae_host2host(struct qed_hwfn *p_hwfn,
	struct qed_ptt *p_ptt,
	dma_addr_t source_addr,
	dma_addr_t dest_addr,
	u32 size_in_dwords, struct qed_dmae_params *p_params);

	int qed_chain_alloc(struct qed_dev cdev, struct qed_chain chain,
	struct qed_chain_init_params *params);
	void qed_chain_free(struct qed_dev cdev, struct qed_chain chain);

	/**
	* qed_fw_l2_queue(): Get absolute L2 queue ID.
	*
	* @p_hwfn: HW device data.
	* @src_id: Relative to p_hwfn.
	* @dst_id: Absolute per engine.
	*
	* Return: Int.
	*/
	int qed_fw_l2_queue(struct qed_hwfn *p_hwfn,
	u16 src_id,
	u16 *dst_id);

	/**
	* qed_fw_vport(): Get absolute vport ID.
	*
	* @p_hwfn: HW device data.
	* @src_id: Relative to p_hwfn.
	* @dst_id: Absolute per engine.
	*
	* Return: Int.
	*/
	int qed_fw_vport(struct qed_hwfn *p_hwfn,
	u8 src_id,
	u8 *dst_id);

	/**
	* qed_fw_rss_eng(): Get absolute RSS engine ID.
	*
	* @p_hwfn: HW device data.
	* @src_id: Relative to p_hwfn.
	* @dst_id: Absolute per engine.
	*
	* Return: Int.
	*/
	int qed_fw_rss_eng(struct qed_hwfn *p_hwfn,
	u8 src_id,
	u8 *dst_id);

	/**
	* qed_llh_get_num_ppfid(): Return the allocated number of LLH filter
	* banks that are allocated to the PF.
	*
	* @cdev: Qed dev pointer.
	*
	* Return: u8 Number of LLH filter banks.
	*/
	u8 qed_llh_get_num_ppfid(struct qed_dev *cdev);

	enum qed_eng {
	QED_ENG0,
	QED_ENG1,
	QED_BOTH_ENG,
	};

	/**
	* qed_llh_set_ppfid_affinity(): Set the engine affinity for the given
	* LLH filter bank.
	*
	* @cdev: Qed dev pointer.
	* @ppfid: Relative within the allocated ppfids ('0' is the default one).
	* @eng: Engine.
	*
	* Return: Int.
	*/
	int qed_llh_set_ppfid_affinity(struct qed_dev *cdev,
	u8 ppfid, enum qed_eng eng);

	/**
	* qed_llh_set_roce_affinity(): Set the RoCE engine affinity.
	*
	* @cdev: Qed dev pointer.
	* @eng: Engine.
	*
	* Return: Int.
	*/
	int qed_llh_set_roce_affinity(struct qed_dev *cdev, enum qed_eng eng);

	/**
	* qed_llh_add_mac_filter(): Add a LLH MAC filter into the given filter
	* bank.
	*
	* @cdev: Qed dev pointer.
	* @ppfid: Relative within the allocated ppfids ('0' is the default one).
	* @mac_addr: MAC to add.
	*
	* Return: Int.
	*/
	int qed_llh_add_mac_filter(struct qed_dev *cdev,
	u8 ppfid, const u8 mac_addr[ETH_ALEN]);

	/**
	* qed_llh_remove_mac_filter(): Remove a LLH MAC filter from the given
	* filter bank.
	*
	* @cdev: Qed dev pointer.
	* @ppfid: Ppfid.
	* @mac_addr: MAC to remove
	*
	* Return: Void.
	*/
	void qed_llh_remove_mac_filter(struct qed_dev *cdev,
	u8 ppfid, u8 mac_addr[ETH_ALEN]);

	enum qed_llh_prot_filter_type_t {
	QED_LLH_FILTER_ETHERTYPE,
	QED_LLH_FILTER_TCP_SRC_PORT,
	QED_LLH_FILTER_TCP_DEST_PORT,
	QED_LLH_FILTER_TCP_SRC_AND_DEST_PORT,
	QED_LLH_FILTER_UDP_SRC_PORT,
	QED_LLH_FILTER_UDP_DEST_PORT,
	QED_LLH_FILTER_UDP_SRC_AND_DEST_PORT
	};

	/**
	* qed_llh_add_protocol_filter(): Add a LLH protocol filter into the
	* given filter bank.
	*
	* @cdev: Qed dev pointer.
	* @ppfid: Relative within the allocated ppfids ('0' is the default one).
	* @type: Type of filters and comparing.
	* @source_port_or_eth_type: Source port or ethertype to add.
	* @dest_port: Destination port to add.
	*
	* Return: Int.
	*/
	int
	qed_llh_add_protocol_filter(struct qed_dev *cdev,
	u8 ppfid,
	enum qed_llh_prot_filter_type_t type,
	u16 source_port_or_eth_type, u16 dest_port);

	/**
	* qed_llh_remove_protocol_filter(): Remove a LLH protocol filter from
	* the given filter bank.
	*
	* @cdev: Qed dev pointer.
	* @ppfid: Relative within the allocated ppfids ('0' is the default one).
	* @type: Type of filters and comparing.
	* @source_port_or_eth_type: Source port or ethertype to add.
	* @dest_port: Destination port to add.
	*/
	void
	qed_llh_remove_protocol_filter(struct qed_dev *cdev,
	u8 ppfid,
	enum qed_llh_prot_filter_type_t type,
	u16 source_port_or_eth_type, u16 dest_port);

	/**
	* qed_final_cleanup(): Cleanup of previous driver remains prior to load.
	*
	* @p_hwfn: HW device data.
	* @p_ptt: P_ptt.
	* @id: For PF, engine-relative. For VF, PF-relative.
	* @is_vf: True iff cleanup is made for a VF.
	*
	* Return: Int.
	*/
	int qed_final_cleanup(struct qed_hwfn *p_hwfn,
	struct qed_ptt *p_ptt, u16 id, bool is_vf);

	/**
	* qed_get_queue_coalesce(): Retrieve coalesce value for a given queue.
	*
	* @p_hwfn: HW device data.
	* @coal: Store coalesce value read from the hardware.
	* @handle: P_handle.
	*
	* Return: Int.
	**/
	int qed_get_queue_coalesce(struct qed_hwfn p_hwfn, u16 coal, void *handle);

	/**
	* qed_set_queue_coalesce(): Configure coalesce parameters for Rx and
	* Tx queue. The fact that we can configure coalescing to up to 511, but on
	* varying accuracy [the bigger the value the less accurate] up to a mistake
	* of 3usec for the highest values.
	* While the API allows setting coalescing per-qid, all queues sharing a SB
	* should be in same range [i.e., either 0-0x7f, 0x80-0xff or 0x100-0x1ff]
	* otherwise configuration would break.
	*
	* @rx_coal: Rx Coalesce value in micro seconds.
	* @tx_coal: TX Coalesce value in micro seconds.
	* @p_handle: P_handle.
	*
	* Return: Int.
	**/
	int
	qed_set_queue_coalesce(u16 rx_coal, u16 tx_coal, void *p_handle);

	/**
	* qed_pglueb_set_pfid_enable(): Enable or disable PCI BUS MASTER.
	*
	* @p_hwfn: HW device data.
	* @p_ptt: P_ptt.
	* @b_enable: True/False.
	*
	* Return: Int.
	*/
	int qed_pglueb_set_pfid_enable(struct qed_hwfn *p_hwfn,
	struct qed_ptt *p_ptt, bool b_enable);

	/**
	* qed_db_recovery_add(): add doorbell information to the doorbell
	* recovery mechanism.
	*
	* @cdev: Qed dev pointer.
	* @db_addr: Doorbell address.
	* @db_data: Address of where db_data is stored.
	* @db_width: Doorbell is 32b pr 64b.
	* @db_space: Doorbell recovery addresses are user or kernel space.
	*
	* Return: Int.
	*/
	int qed_db_recovery_add(struct qed_dev *cdev,
	void __iomem *db_addr,
	void *db_data,
	enum qed_db_rec_width db_width,
	enum qed_db_rec_space db_space);

	/**
	* qed_db_recovery_del() - remove doorbell information from the doorbell
	* recovery mechanism. db_data serves as key (db_addr is not unique).
	*
	* @cdev: Qed dev pointer.
	* @db_addr: doorbell address.
	* @db_data: address where db_data is stored. Serves as key for the
	* entry to delete.
	*
	* Return: Int.
	*/
	int qed_db_recovery_del(struct qed_dev *cdev,
	void __iomem db_addr, void db_data);

	const char *qed_hw_get_resc_name(enum qed_resources res_id);
	#endif