blob: 2377179de017b54d4af07a9c19e4154876e49603 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0+
/*
* Driver for Vitesse PHYs
*
* Author: Kriston Carson
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
#include <linux/bitfield.h>
/* Vitesse Extended Page Magic Register(s) */
#define MII_VSC73XX_EXT_PAGE_1E 0x01
#define MII_VSC82X4_EXT_PAGE_16E 0x10
#define MII_VSC82X4_EXT_PAGE_17E 0x11
#define MII_VSC82X4_EXT_PAGE_18E 0x12
/* Vitesse Extended Control Register 1 */
#define MII_VSC8244_EXT_CON1 0x17
#define MII_VSC8244_EXTCON1_INIT 0x0000
#define MII_VSC8244_EXTCON1_TX_SKEW_MASK 0x0c00
#define MII_VSC8244_EXTCON1_RX_SKEW_MASK 0x0300
#define MII_VSC8244_EXTCON1_TX_SKEW 0x0800
#define MII_VSC8244_EXTCON1_RX_SKEW 0x0200
/* Vitesse Interrupt Mask Register */
#define MII_VSC8244_IMASK 0x19
#define MII_VSC8244_IMASK_IEN 0x8000
#define MII_VSC8244_IMASK_SPEED 0x4000
#define MII_VSC8244_IMASK_LINK 0x2000
#define MII_VSC8244_IMASK_DUPLEX 0x1000
#define MII_VSC8244_IMASK_MASK 0xf000
#define MII_VSC8221_IMASK_MASK 0xa000
/* Vitesse Interrupt Status Register */
#define MII_VSC8244_ISTAT 0x1a
#define MII_VSC8244_ISTAT_STATUS 0x8000
#define MII_VSC8244_ISTAT_SPEED 0x4000
#define MII_VSC8244_ISTAT_LINK 0x2000
#define MII_VSC8244_ISTAT_DUPLEX 0x1000
#define MII_VSC8244_ISTAT_MASK (MII_VSC8244_ISTAT_SPEED | \
MII_VSC8244_ISTAT_LINK | \
MII_VSC8244_ISTAT_DUPLEX)
#define MII_VSC8221_ISTAT_MASK MII_VSC8244_ISTAT_LINK
/* Vitesse Auxiliary Control/Status Register */
#define MII_VSC8244_AUX_CONSTAT 0x1c
#define MII_VSC8244_AUXCONSTAT_INIT 0x0000
#define MII_VSC8244_AUXCONSTAT_DUPLEX 0x0020
#define MII_VSC8244_AUXCONSTAT_SPEED 0x0018
#define MII_VSC8244_AUXCONSTAT_GBIT 0x0010
#define MII_VSC8244_AUXCONSTAT_100 0x0008
#define MII_VSC8221_AUXCONSTAT_INIT 0x0004 /* need to set this bit? */
#define MII_VSC8221_AUXCONSTAT_RESERVED 0x0004
/* Vitesse Extended Page Access Register */
#define MII_VSC82X4_EXT_PAGE_ACCESS 0x1f
/* Vitesse VSC73XX Extended Control Register */
#define MII_VSC73XX_PHY_CTRL_EXT3 0x14
#define MII_VSC73XX_PHY_CTRL_EXT3_DOWNSHIFT_EN BIT(4)
#define MII_VSC73XX_PHY_CTRL_EXT3_DOWNSHIFT_CNT GENMASK(3, 2)
#define MII_VSC73XX_PHY_CTRL_EXT3_DOWNSHIFT_STA BIT(1)
#define MII_VSC73XX_DOWNSHIFT_MAX 5
#define MII_VSC73XX_DOWNSHIFT_INVAL 1
/* VSC73XX PHY_BYPASS_CTRL register*/
#define MII_VSC73XX_PHY_BYPASS_CTRL MII_DCOUNTER
#define MII_VSC73XX_PBC_TX_DIS BIT(15)
#define MII_VSC73XX_PBC_FOR_SPD_AUTO_MDIX_DIS BIT(7)
#define MII_VSC73XX_PBC_PAIR_SWAP_DIS BIT(5)
#define MII_VSC73XX_PBC_POL_INV_DIS BIT(4)
#define MII_VSC73XX_PBC_PARALLEL_DET_DIS BIT(3)
#define MII_VSC73XX_PBC_AUTO_NP_EXCHANGE_DIS BIT(1)
/* VSC73XX PHY_AUX_CTRL_STAT register */
#define MII_VSC73XX_PHY_AUX_CTRL_STAT MII_NCONFIG
#define MII_VSC73XX_PACS_NO_MDI_X_IND BIT(13)
/* Vitesse VSC8601 Extended PHY Control Register 1 */
#define MII_VSC8601_EPHY_CTL 0x17
#define MII_VSC8601_EPHY_CTL_RGMII_SKEW (1 << 8)
#define PHY_ID_VSC8234 0x000fc620
#define PHY_ID_VSC8244 0x000fc6c0
#define PHY_ID_VSC8572 0x000704d0
#define PHY_ID_VSC8601 0x00070420
#define PHY_ID_VSC7385 0x00070450
#define PHY_ID_VSC7388 0x00070480
#define PHY_ID_VSC7395 0x00070550
#define PHY_ID_VSC7398 0x00070580
#define PHY_ID_VSC8662 0x00070660
#define PHY_ID_VSC8221 0x000fc550
#define PHY_ID_VSC8211 0x000fc4b0
MODULE_DESCRIPTION("Vitesse PHY driver");
MODULE_AUTHOR("Kriston Carson");
MODULE_LICENSE("GPL");
static int vsc824x_add_skew(struct phy_device *phydev)
{
int err;
int extcon;
extcon = phy_read(phydev, MII_VSC8244_EXT_CON1);
if (extcon < 0)
return extcon;
extcon &= ~(MII_VSC8244_EXTCON1_TX_SKEW_MASK |
MII_VSC8244_EXTCON1_RX_SKEW_MASK);
extcon |= (MII_VSC8244_EXTCON1_TX_SKEW |
MII_VSC8244_EXTCON1_RX_SKEW);
err = phy_write(phydev, MII_VSC8244_EXT_CON1, extcon);
return err;
}
static int vsc824x_config_init(struct phy_device *phydev)
{
int err;
err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
MII_VSC8244_AUXCONSTAT_INIT);
if (err < 0)
return err;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
err = vsc824x_add_skew(phydev);
return err;
}
#define VSC73XX_EXT_PAGE_ACCESS 0x1f
static int vsc73xx_read_page(struct phy_device *phydev)
{
return __phy_read(phydev, VSC73XX_EXT_PAGE_ACCESS);
}
static int vsc73xx_write_page(struct phy_device *phydev, int page)
{
return __phy_write(phydev, VSC73XX_EXT_PAGE_ACCESS, page);
}
static int vsc73xx_get_downshift(struct phy_device *phydev, u8 *data)
{
int val, enable, cnt;
val = phy_read_paged(phydev, MII_VSC73XX_EXT_PAGE_1E,
MII_VSC73XX_PHY_CTRL_EXT3);
if (val < 0)
return val;
enable = FIELD_GET(MII_VSC73XX_PHY_CTRL_EXT3_DOWNSHIFT_EN, val);
cnt = FIELD_GET(MII_VSC73XX_PHY_CTRL_EXT3_DOWNSHIFT_CNT, val) + 2;
*data = enable ? cnt : DOWNSHIFT_DEV_DISABLE;
return 0;
}
static int vsc73xx_set_downshift(struct phy_device *phydev, u8 cnt)
{
u16 mask, val;
int ret;
if (cnt > MII_VSC73XX_DOWNSHIFT_MAX)
return -E2BIG;
else if (cnt == MII_VSC73XX_DOWNSHIFT_INVAL)
return -EINVAL;
mask = MII_VSC73XX_PHY_CTRL_EXT3_DOWNSHIFT_EN;
if (!cnt) {
val = 0;
} else {
mask |= MII_VSC73XX_PHY_CTRL_EXT3_DOWNSHIFT_CNT;
val = MII_VSC73XX_PHY_CTRL_EXT3_DOWNSHIFT_EN |
FIELD_PREP(MII_VSC73XX_PHY_CTRL_EXT3_DOWNSHIFT_CNT,
cnt - 2);
}
ret = phy_modify_paged(phydev, MII_VSC73XX_EXT_PAGE_1E,
MII_VSC73XX_PHY_CTRL_EXT3, mask, val);
if (ret < 0)
return ret;
return genphy_soft_reset(phydev);
}
static int vsc73xx_get_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, void *data)
{
switch (tuna->id) {
case ETHTOOL_PHY_DOWNSHIFT:
return vsc73xx_get_downshift(phydev, data);
default:
return -EOPNOTSUPP;
}
}
static int vsc73xx_set_tunable(struct phy_device *phydev,
struct ethtool_tunable *tuna, const void *data)
{
switch (tuna->id) {
case ETHTOOL_PHY_DOWNSHIFT:
return vsc73xx_set_downshift(phydev, *(const u8 *)data);
default:
return -EOPNOTSUPP;
}
}
static void vsc73xx_config_init(struct phy_device *phydev)
{
/* Receiver init */
phy_write(phydev, 0x1f, 0x2a30);
phy_modify(phydev, 0x0c, 0x0300, 0x0200);
phy_write(phydev, 0x1f, 0x0000);
/* Config LEDs 0x61 */
phy_modify(phydev, MII_TPISTATUS, 0xff00, 0x0061);
/* Enable downshift by default */
vsc73xx_set_downshift(phydev, MII_VSC73XX_DOWNSHIFT_MAX);
/* Set Auto MDI-X by default */
phydev->mdix_ctrl = ETH_TP_MDI_AUTO;
}
static int vsc738x_config_init(struct phy_device *phydev)
{
u16 rev;
/* This magic sequence appear in the application note
* "VSC7385/7388 PHY Configuration".
*
* Maybe one day we will get to know what it all means.
*/
phy_write(phydev, 0x1f, 0x2a30);
phy_modify(phydev, 0x08, 0x0200, 0x0200);
phy_write(phydev, 0x1f, 0x52b5);
phy_write(phydev, 0x10, 0xb68a);
phy_modify(phydev, 0x12, 0xff07, 0x0003);
phy_modify(phydev, 0x11, 0x00ff, 0x00a2);
phy_write(phydev, 0x10, 0x968a);
phy_write(phydev, 0x1f, 0x2a30);
phy_modify(phydev, 0x08, 0x0200, 0x0000);
phy_write(phydev, 0x1f, 0x0000);
/* Read revision */
rev = phy_read(phydev, MII_PHYSID2);
rev &= 0x0f;
/* Special quirk for revision 0 */
if (rev == 0) {
phy_write(phydev, 0x1f, 0x2a30);
phy_modify(phydev, 0x08, 0x0200, 0x0200);
phy_write(phydev, 0x1f, 0x52b5);
phy_write(phydev, 0x12, 0x0000);
phy_write(phydev, 0x11, 0x0689);
phy_write(phydev, 0x10, 0x8f92);
phy_write(phydev, 0x1f, 0x52b5);
phy_write(phydev, 0x12, 0x0000);
phy_write(phydev, 0x11, 0x0e35);
phy_write(phydev, 0x10, 0x9786);
phy_write(phydev, 0x1f, 0x2a30);
phy_modify(phydev, 0x08, 0x0200, 0x0000);
phy_write(phydev, 0x17, 0xff80);
phy_write(phydev, 0x17, 0x0000);
}
phy_write(phydev, 0x1f, 0x0000);
phy_write(phydev, 0x12, 0x0048);
if (rev == 0) {
phy_write(phydev, 0x1f, 0x2a30);
phy_write(phydev, 0x14, 0x6600);
phy_write(phydev, 0x1f, 0x0000);
phy_write(phydev, 0x18, 0xa24e);
} else {
phy_write(phydev, 0x1f, 0x2a30);
phy_modify(phydev, 0x16, 0x0fc0, 0x0240);
phy_modify(phydev, 0x14, 0x6000, 0x4000);
/* bits 14-15 in extended register 0x14 controls DACG amplitude
* 6 = -8%, 2 is hardware default
*/
phy_write(phydev, 0x1f, 0x0001);
phy_modify(phydev, 0x14, 0xe000, 0x6000);
phy_write(phydev, 0x1f, 0x0000);
}
vsc73xx_config_init(phydev);
return 0;
}
static int vsc739x_config_init(struct phy_device *phydev)
{
/* This magic sequence appears in the VSC7395 SparX-G5e application
* note "VSC7395/VSC7398 PHY Configuration"
*
* Maybe one day we will get to know what it all means.
*/
phy_write(phydev, 0x1f, 0x2a30);
phy_modify(phydev, 0x08, 0x0200, 0x0200);
phy_write(phydev, 0x1f, 0x52b5);
phy_write(phydev, 0x10, 0xb68a);
phy_modify(phydev, 0x12, 0xff07, 0x0003);
phy_modify(phydev, 0x11, 0x00ff, 0x00a2);
phy_write(phydev, 0x10, 0x968a);
phy_write(phydev, 0x1f, 0x2a30);
phy_modify(phydev, 0x08, 0x0200, 0x0000);
phy_write(phydev, 0x1f, 0x0000);
phy_write(phydev, 0x1f, 0x0000);
phy_write(phydev, 0x12, 0x0048);
phy_write(phydev, 0x1f, 0x2a30);
phy_modify(phydev, 0x16, 0x0fc0, 0x0240);
phy_modify(phydev, 0x14, 0x6000, 0x4000);
phy_write(phydev, 0x1f, 0x0001);
phy_modify(phydev, 0x14, 0xe000, 0x6000);
phy_write(phydev, 0x1f, 0x0000);
vsc73xx_config_init(phydev);
return 0;
}
static int vsc73xx_mdix_set(struct phy_device *phydev, u8 mdix)
{
int ret;
u16 val;
val = phy_read(phydev, MII_VSC73XX_PHY_BYPASS_CTRL);
switch (mdix) {
case ETH_TP_MDI:
val |= MII_VSC73XX_PBC_FOR_SPD_AUTO_MDIX_DIS |
MII_VSC73XX_PBC_PAIR_SWAP_DIS |
MII_VSC73XX_PBC_POL_INV_DIS;
break;
case ETH_TP_MDI_X:
/* When MDI-X auto configuration is disabled, is possible
* to force only MDI mode. Let's use autoconfig for forced
* MDIX mode.
*/
case ETH_TP_MDI_AUTO:
val &= ~(MII_VSC73XX_PBC_FOR_SPD_AUTO_MDIX_DIS |
MII_VSC73XX_PBC_PAIR_SWAP_DIS |
MII_VSC73XX_PBC_POL_INV_DIS);
break;
default:
return -EINVAL;
}
ret = phy_write(phydev, MII_VSC73XX_PHY_BYPASS_CTRL, val);
if (ret)
return ret;
return genphy_restart_aneg(phydev);
}
static int vsc73xx_config_aneg(struct phy_device *phydev)
{
int ret;
ret = vsc73xx_mdix_set(phydev, phydev->mdix_ctrl);
if (ret)
return ret;
return genphy_config_aneg(phydev);
}
static int vsc73xx_mdix_get(struct phy_device *phydev, u8 *mdix)
{
u16 reg_val;
reg_val = phy_read(phydev, MII_VSC73XX_PHY_AUX_CTRL_STAT);
if (reg_val & MII_VSC73XX_PACS_NO_MDI_X_IND)
*mdix = ETH_TP_MDI;
else
*mdix = ETH_TP_MDI_X;
return 0;
}
static int vsc73xx_read_status(struct phy_device *phydev)
{
int ret;
ret = vsc73xx_mdix_get(phydev, &phydev->mdix);
if (ret < 0)
return ret;
return genphy_read_status(phydev);
}
/* This adds a skew for both TX and RX clocks, so the skew should only be
* applied to "rgmii-id" interfaces. It may not work as expected
* on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces.
*/
static int vsc8601_add_skew(struct phy_device *phydev)
{
int ret;
ret = phy_read(phydev, MII_VSC8601_EPHY_CTL);
if (ret < 0)
return ret;
ret |= MII_VSC8601_EPHY_CTL_RGMII_SKEW;
return phy_write(phydev, MII_VSC8601_EPHY_CTL, ret);
}
static int vsc8601_config_init(struct phy_device *phydev)
{
int ret = 0;
if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID)
ret = vsc8601_add_skew(phydev);
if (ret < 0)
return ret;
return 0;
}
static int vsc82xx_config_intr(struct phy_device *phydev)
{
int err;
if (phydev->interrupts == PHY_INTERRUPT_ENABLED)
/* Don't bother to ACK the interrupts since the 824x cannot
* clear the interrupts if they are disabled.
*/
err = phy_write(phydev, MII_VSC8244_IMASK,
(phydev->drv->phy_id == PHY_ID_VSC8234 ||
phydev->drv->phy_id == PHY_ID_VSC8244 ||
phydev->drv->phy_id == PHY_ID_VSC8572 ||
phydev->drv->phy_id == PHY_ID_VSC8601) ?
MII_VSC8244_IMASK_MASK :
MII_VSC8221_IMASK_MASK);
else {
/* The Vitesse PHY cannot clear the interrupt
* once it has disabled them, so we clear them first
*/
err = phy_read(phydev, MII_VSC8244_ISTAT);
if (err < 0)
return err;
err = phy_write(phydev, MII_VSC8244_IMASK, 0);
}
return err;
}
static irqreturn_t vsc82xx_handle_interrupt(struct phy_device *phydev)
{
int irq_status, irq_mask;
if (phydev->drv->phy_id == PHY_ID_VSC8244 ||
phydev->drv->phy_id == PHY_ID_VSC8572 ||
phydev->drv->phy_id == PHY_ID_VSC8601)
irq_mask = MII_VSC8244_ISTAT_MASK;
else
irq_mask = MII_VSC8221_ISTAT_MASK;
irq_status = phy_read(phydev, MII_VSC8244_ISTAT);
if (irq_status < 0) {
phy_error(phydev);
return IRQ_NONE;
}
if (!(irq_status & irq_mask))
return IRQ_NONE;
phy_trigger_machine(phydev);
return IRQ_HANDLED;
}
static int vsc8221_config_init(struct phy_device *phydev)
{
int err;
err = phy_write(phydev, MII_VSC8244_AUX_CONSTAT,
MII_VSC8221_AUXCONSTAT_INIT);
return err;
/* Perhaps we should set EXT_CON1 based on the interface?
* Options are 802.3Z SerDes or SGMII
*/
}
/* vsc82x4_config_autocross_enable - Enable auto MDI/MDI-X for forced links
* @phydev: target phy_device struct
*
* Enable auto MDI/MDI-X when in 10/100 forced link speeds by writing
* special values in the VSC8234/VSC8244 extended reserved registers
*/
static int vsc82x4_config_autocross_enable(struct phy_device *phydev)
{
int ret;
if (phydev->autoneg == AUTONEG_ENABLE || phydev->speed > SPEED_100)
return 0;
/* map extended registers set 0x10 - 0x1e */
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x52b5);
if (ret >= 0)
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_18E, 0x0012);
if (ret >= 0)
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_17E, 0x2803);
if (ret >= 0)
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_16E, 0x87fa);
/* map standard registers set 0x10 - 0x1e */
if (ret >= 0)
ret = phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
else
phy_write(phydev, MII_VSC82X4_EXT_PAGE_ACCESS, 0x0000);
return ret;
}
/* vsc82x4_config_aneg - restart auto-negotiation or write BMCR
* @phydev: target phy_device struct
*
* Description: If auto-negotiation is enabled, we configure the
* advertising, and then restart auto-negotiation. If it is not
* enabled, then we write the BMCR and also start the auto
* MDI/MDI-X feature
*/
static int vsc82x4_config_aneg(struct phy_device *phydev)
{
int ret;
/* Enable auto MDI/MDI-X when in 10/100 forced link speeds by
* writing special values in the VSC8234 extended reserved registers
*/
if (phydev->autoneg != AUTONEG_ENABLE && phydev->speed <= SPEED_100) {
ret = genphy_setup_forced(phydev);
if (ret < 0) /* error */
return ret;
return vsc82x4_config_autocross_enable(phydev);
}
return genphy_config_aneg(phydev);
}
/* Vitesse 82xx */
static struct phy_driver vsc82xx_driver[] = {
{
.phy_id = PHY_ID_VSC8234,
.name = "Vitesse VSC8234",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
}, {
.phy_id = PHY_ID_VSC8244,
.name = "Vitesse VSC8244",
.phy_id_mask = 0x000fffc0,
/* PHY_GBIT_FEATURES */
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
}, {
.phy_id = PHY_ID_VSC8572,
.name = "Vitesse VSC8572",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
}, {
.phy_id = PHY_ID_VSC8601,
.name = "Vitesse VSC8601",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
.config_init = &vsc8601_config_init,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
}, {
.phy_id = PHY_ID_VSC7385,
.name = "Vitesse VSC7385",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
.config_init = vsc738x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_status = vsc73xx_read_status,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
.get_tunable = vsc73xx_get_tunable,
.set_tunable = vsc73xx_set_tunable,
}, {
.phy_id = PHY_ID_VSC7388,
.name = "Vitesse VSC7388",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
.config_init = vsc738x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_status = vsc73xx_read_status,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
.get_tunable = vsc73xx_get_tunable,
.set_tunable = vsc73xx_set_tunable,
}, {
.phy_id = PHY_ID_VSC7395,
.name = "Vitesse VSC7395",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
.config_init = vsc739x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_status = vsc73xx_read_status,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
.get_tunable = vsc73xx_get_tunable,
.set_tunable = vsc73xx_set_tunable,
}, {
.phy_id = PHY_ID_VSC7398,
.name = "Vitesse VSC7398",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
.config_init = vsc739x_config_init,
.config_aneg = vsc73xx_config_aneg,
.read_status = vsc73xx_read_status,
.read_page = vsc73xx_read_page,
.write_page = vsc73xx_write_page,
.get_tunable = vsc73xx_get_tunable,
.set_tunable = vsc73xx_set_tunable,
}, {
.phy_id = PHY_ID_VSC8662,
.name = "Vitesse VSC8662",
.phy_id_mask = 0x000ffff0,
/* PHY_GBIT_FEATURES */
.config_init = &vsc824x_config_init,
.config_aneg = &vsc82x4_config_aneg,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
}, {
/* Vitesse 8221 */
.phy_id = PHY_ID_VSC8221,
.phy_id_mask = 0x000ffff0,
.name = "Vitesse VSC8221",
/* PHY_GBIT_FEATURES */
.config_init = &vsc8221_config_init,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
}, {
/* Vitesse 8211 */
.phy_id = PHY_ID_VSC8211,
.phy_id_mask = 0x000ffff0,
.name = "Vitesse VSC8211",
/* PHY_GBIT_FEATURES */
.config_init = &vsc8221_config_init,
.config_intr = &vsc82xx_config_intr,
.handle_interrupt = &vsc82xx_handle_interrupt,
} };
module_phy_driver(vsc82xx_driver);
static struct mdio_device_id __maybe_unused vitesse_tbl[] = {
{ PHY_ID_VSC8234, 0x000ffff0 },
{ PHY_ID_VSC8244, 0x000fffc0 },
{ PHY_ID_VSC8572, 0x000ffff0 },
{ PHY_ID_VSC7385, 0x000ffff0 },
{ PHY_ID_VSC7388, 0x000ffff0 },
{ PHY_ID_VSC7395, 0x000ffff0 },
{ PHY_ID_VSC7398, 0x000ffff0 },
{ PHY_ID_VSC8662, 0x000ffff0 },
{ PHY_ID_VSC8221, 0x000ffff0 },
{ PHY_ID_VSC8211, 0x000ffff0 },
{ }
};
MODULE_DEVICE_TABLE(mdio, vitesse_tbl);