| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ppp_deflate.c - interface the zlib procedures for Deflate compression |
| * and decompression (as used by gzip) to the PPP code. |
| * |
| * Copyright 1994-1998 Paul Mackerras. |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/vmalloc.h> |
| #include <linux/init.h> |
| #include <linux/string.h> |
| |
| #include <linux/ppp_defs.h> |
| #include <linux/ppp-comp.h> |
| |
| #include <linux/zlib.h> |
| #include <linux/unaligned.h> |
| |
| /* |
| * State for a Deflate (de)compressor. |
| */ |
| struct ppp_deflate_state { |
| int seqno; |
| int w_size; |
| int unit; |
| int mru; |
| int debug; |
| z_stream strm; |
| struct compstat stats; |
| }; |
| |
| #define DEFLATE_OVHD 2 /* Deflate overhead/packet */ |
| |
| static void *z_comp_alloc(unsigned char *options, int opt_len); |
| static void *z_decomp_alloc(unsigned char *options, int opt_len); |
| static void z_comp_free(void *state); |
| static void z_decomp_free(void *state); |
| static int z_comp_init(void *state, unsigned char *options, |
| int opt_len, |
| int unit, int hdrlen, int debug); |
| static int z_decomp_init(void *state, unsigned char *options, |
| int opt_len, |
| int unit, int hdrlen, int mru, int debug); |
| static int z_compress(void *state, unsigned char *rptr, |
| unsigned char *obuf, |
| int isize, int osize); |
| static void z_incomp(void *state, unsigned char *ibuf, int icnt); |
| static int z_decompress(void *state, unsigned char *ibuf, |
| int isize, unsigned char *obuf, int osize); |
| static void z_comp_reset(void *state); |
| static void z_decomp_reset(void *state); |
| static void z_comp_stats(void *state, struct compstat *stats); |
| |
| /** |
| * z_comp_free - free the memory used by a compressor |
| * @arg: pointer to the private state for the compressor. |
| */ |
| static void z_comp_free(void *arg) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| |
| if (state) { |
| zlib_deflateEnd(&state->strm); |
| vfree(state->strm.workspace); |
| kfree(state); |
| } |
| } |
| |
| /** |
| * z_comp_alloc - allocate space for a compressor. |
| * @options: pointer to CCP option data |
| * @opt_len: length of the CCP option at @options. |
| * |
| * The @options pointer points to the a buffer containing the |
| * CCP option data for the compression being negotiated. It is |
| * formatted according to RFC1979, and describes the window |
| * size that the peer is requesting that we use in compressing |
| * data to be sent to it. |
| * |
| * Returns the pointer to the private state for the compressor, |
| * or NULL if we could not allocate enough memory. |
| */ |
| static void *z_comp_alloc(unsigned char *options, int opt_len) |
| { |
| struct ppp_deflate_state *state; |
| int w_size; |
| |
| if (opt_len != CILEN_DEFLATE || |
| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT) || |
| options[1] != CILEN_DEFLATE || |
| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL || |
| options[3] != DEFLATE_CHK_SEQUENCE) |
| return NULL; |
| w_size = DEFLATE_SIZE(options[2]); |
| if (w_size < DEFLATE_MIN_SIZE || w_size > DEFLATE_MAX_SIZE) |
| return NULL; |
| |
| state = kzalloc(sizeof(*state), |
| GFP_KERNEL); |
| if (state == NULL) |
| return NULL; |
| |
| state->strm.next_in = NULL; |
| state->w_size = w_size; |
| state->strm.workspace = vmalloc(zlib_deflate_workspacesize(-w_size, 8)); |
| if (state->strm.workspace == NULL) |
| goto out_free; |
| |
| if (zlib_deflateInit2(&state->strm, Z_DEFAULT_COMPRESSION, |
| DEFLATE_METHOD_VAL, -w_size, 8, Z_DEFAULT_STRATEGY) |
| != Z_OK) |
| goto out_free; |
| return (void *) state; |
| |
| out_free: |
| z_comp_free(state); |
| return NULL; |
| } |
| |
| /** |
| * z_comp_init - initialize a previously-allocated compressor. |
| * @arg: pointer to the private state for the compressor |
| * @options: pointer to the CCP option data describing the |
| * compression that was negotiated with the peer |
| * @opt_len: length of the CCP option data at @options |
| * @unit: PPP unit number for diagnostic messages |
| * @hdrlen: ignored (present for backwards compatibility) |
| * @debug: debug flag; if non-zero, debug messages are printed. |
| * |
| * The CCP options described by @options must match the options |
| * specified when the compressor was allocated. The compressor |
| * history is reset. Returns 0 for failure (CCP options don't |
| * match) or 1 for success. |
| */ |
| static int z_comp_init(void *arg, unsigned char *options, int opt_len, |
| int unit, int hdrlen, int debug) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| |
| if (opt_len < CILEN_DEFLATE || |
| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT) || |
| options[1] != CILEN_DEFLATE || |
| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL || |
| DEFLATE_SIZE(options[2]) != state->w_size || |
| options[3] != DEFLATE_CHK_SEQUENCE) |
| return 0; |
| |
| state->seqno = 0; |
| state->unit = unit; |
| state->debug = debug; |
| |
| zlib_deflateReset(&state->strm); |
| |
| return 1; |
| } |
| |
| /** |
| * z_comp_reset - reset a previously-allocated compressor. |
| * @arg: pointer to private state for the compressor. |
| * |
| * This clears the history for the compressor and makes it |
| * ready to start emitting a new compressed stream. |
| */ |
| static void z_comp_reset(void *arg) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| |
| state->seqno = 0; |
| zlib_deflateReset(&state->strm); |
| } |
| |
| /** |
| * z_compress - compress a PPP packet with Deflate compression. |
| * @arg: pointer to private state for the compressor |
| * @rptr: uncompressed packet (input) |
| * @obuf: compressed packet (output) |
| * @isize: size of uncompressed packet |
| * @osize: space available at @obuf |
| * |
| * Returns the length of the compressed packet, or 0 if the |
| * packet is incompressible. |
| */ |
| static int z_compress(void *arg, unsigned char *rptr, unsigned char *obuf, |
| int isize, int osize) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| int r, proto, off, olen, oavail; |
| unsigned char *wptr; |
| |
| /* |
| * Check that the protocol is in the range we handle. |
| */ |
| proto = PPP_PROTOCOL(rptr); |
| if (proto > 0x3fff || proto == 0xfd || proto == 0xfb) |
| return 0; |
| |
| /* Don't generate compressed packets which are larger than |
| the uncompressed packet. */ |
| if (osize > isize) |
| osize = isize; |
| |
| wptr = obuf; |
| |
| /* |
| * Copy over the PPP header and store the 2-byte sequence number. |
| */ |
| wptr[0] = PPP_ADDRESS(rptr); |
| wptr[1] = PPP_CONTROL(rptr); |
| put_unaligned_be16(PPP_COMP, wptr + 2); |
| wptr += PPP_HDRLEN; |
| put_unaligned_be16(state->seqno, wptr); |
| wptr += DEFLATE_OVHD; |
| olen = PPP_HDRLEN + DEFLATE_OVHD; |
| state->strm.next_out = wptr; |
| state->strm.avail_out = oavail = osize - olen; |
| ++state->seqno; |
| |
| off = (proto > 0xff) ? 2 : 3; /* skip 1st proto byte if 0 */ |
| rptr += off; |
| state->strm.next_in = rptr; |
| state->strm.avail_in = (isize - off); |
| |
| for (;;) { |
| r = zlib_deflate(&state->strm, Z_PACKET_FLUSH); |
| if (r != Z_OK) { |
| if (state->debug) |
| printk(KERN_ERR |
| "z_compress: deflate returned %d\n", r); |
| break; |
| } |
| if (state->strm.avail_out == 0) { |
| olen += oavail; |
| state->strm.next_out = NULL; |
| state->strm.avail_out = oavail = 1000000; |
| } else { |
| break; /* all done */ |
| } |
| } |
| olen += oavail - state->strm.avail_out; |
| |
| /* |
| * See if we managed to reduce the size of the packet. |
| */ |
| if (olen < isize && olen <= osize) { |
| state->stats.comp_bytes += olen; |
| state->stats.comp_packets++; |
| } else { |
| state->stats.inc_bytes += isize; |
| state->stats.inc_packets++; |
| olen = 0; |
| } |
| state->stats.unc_bytes += isize; |
| state->stats.unc_packets++; |
| |
| return olen; |
| } |
| |
| /** |
| * z_comp_stats - return compression statistics for a compressor |
| * or decompressor. |
| * @arg: pointer to private space for the (de)compressor |
| * @stats: pointer to a struct compstat to receive the result. |
| */ |
| static void z_comp_stats(void *arg, struct compstat *stats) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| |
| *stats = state->stats; |
| } |
| |
| /** |
| * z_decomp_free - Free the memory used by a decompressor. |
| * @arg: pointer to private space for the decompressor. |
| */ |
| static void z_decomp_free(void *arg) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| |
| if (state) { |
| vfree(state->strm.workspace); |
| kfree(state); |
| } |
| } |
| |
| /** |
| * z_decomp_alloc - allocate space for a decompressor. |
| * @options: pointer to CCP option data |
| * @opt_len: length of the CCP option at @options. |
| * |
| * The @options pointer points to the a buffer containing the |
| * CCP option data for the compression being negotiated. It is |
| * formatted according to RFC1979, and describes the window |
| * size that we are requesting the peer to use in compressing |
| * data to be sent to us. |
| * |
| * Returns the pointer to the private state for the decompressor, |
| * or NULL if we could not allocate enough memory. |
| */ |
| static void *z_decomp_alloc(unsigned char *options, int opt_len) |
| { |
| struct ppp_deflate_state *state; |
| int w_size; |
| |
| if (opt_len != CILEN_DEFLATE || |
| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT) || |
| options[1] != CILEN_DEFLATE || |
| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL || |
| options[3] != DEFLATE_CHK_SEQUENCE) |
| return NULL; |
| w_size = DEFLATE_SIZE(options[2]); |
| if (w_size < DEFLATE_MIN_SIZE || w_size > DEFLATE_MAX_SIZE) |
| return NULL; |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| if (state == NULL) |
| return NULL; |
| |
| state->w_size = w_size; |
| state->strm.next_out = NULL; |
| state->strm.workspace = vmalloc(zlib_inflate_workspacesize()); |
| if (state->strm.workspace == NULL) |
| goto out_free; |
| |
| if (zlib_inflateInit2(&state->strm, -w_size) != Z_OK) |
| goto out_free; |
| return (void *) state; |
| |
| out_free: |
| z_decomp_free(state); |
| return NULL; |
| } |
| |
| /** |
| * z_decomp_init - initialize a previously-allocated decompressor. |
| * @arg: pointer to the private state for the decompressor |
| * @options: pointer to the CCP option data describing the |
| * compression that was negotiated with the peer |
| * @opt_len: length of the CCP option data at @options |
| * @unit: PPP unit number for diagnostic messages |
| * @hdrlen: ignored (present for backwards compatibility) |
| * @mru: maximum length of decompressed packets |
| * @debug: debug flag; if non-zero, debug messages are printed. |
| * |
| * The CCP options described by @options must match the options |
| * specified when the decompressor was allocated. The decompressor |
| * history is reset. Returns 0 for failure (CCP options don't |
| * match) or 1 for success. |
| */ |
| static int z_decomp_init(void *arg, unsigned char *options, int opt_len, |
| int unit, int hdrlen, int mru, int debug) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| |
| if (opt_len < CILEN_DEFLATE || |
| (options[0] != CI_DEFLATE && options[0] != CI_DEFLATE_DRAFT) || |
| options[1] != CILEN_DEFLATE || |
| DEFLATE_METHOD(options[2]) != DEFLATE_METHOD_VAL || |
| DEFLATE_SIZE(options[2]) != state->w_size || |
| options[3] != DEFLATE_CHK_SEQUENCE) |
| return 0; |
| |
| state->seqno = 0; |
| state->unit = unit; |
| state->debug = debug; |
| state->mru = mru; |
| |
| zlib_inflateReset(&state->strm); |
| |
| return 1; |
| } |
| |
| /** |
| * z_decomp_reset - reset a previously-allocated decompressor. |
| * @arg: pointer to private state for the decompressor. |
| * |
| * This clears the history for the decompressor and makes it |
| * ready to receive a new compressed stream. |
| */ |
| static void z_decomp_reset(void *arg) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| |
| state->seqno = 0; |
| zlib_inflateReset(&state->strm); |
| } |
| |
| /** |
| * z_decompress - decompress a Deflate-compressed packet. |
| * @arg: pointer to private state for the decompressor |
| * @ibuf: pointer to input (compressed) packet data |
| * @isize: length of input packet |
| * @obuf: pointer to space for output (decompressed) packet |
| * @osize: amount of space available at @obuf |
| * |
| * Because of patent problems, we return DECOMP_ERROR for errors |
| * found by inspecting the input data and for system problems, but |
| * DECOMP_FATALERROR for any errors which could possibly be said to |
| * be being detected "after" decompression. For DECOMP_ERROR, |
| * we can issue a CCP reset-request; for DECOMP_FATALERROR, we may be |
| * infringing a patent of Motorola's if we do, so we take CCP down |
| * instead. |
| * |
| * Given that the frame has the correct sequence number and a good FCS, |
| * errors such as invalid codes in the input most likely indicate a |
| * bug, so we return DECOMP_FATALERROR for them in order to turn off |
| * compression, even though they are detected by inspecting the input. |
| */ |
| static int z_decompress(void *arg, unsigned char *ibuf, int isize, |
| unsigned char *obuf, int osize) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| int olen, seq, r; |
| int decode_proto, overflow; |
| unsigned char overflow_buf[1]; |
| |
| if (isize <= PPP_HDRLEN + DEFLATE_OVHD) { |
| if (state->debug) |
| printk(KERN_DEBUG "z_decompress%d: short pkt (%d)\n", |
| state->unit, isize); |
| return DECOMP_ERROR; |
| } |
| |
| /* Check the sequence number. */ |
| seq = get_unaligned_be16(ibuf + PPP_HDRLEN); |
| if (seq != (state->seqno & 0xffff)) { |
| if (state->debug) |
| printk(KERN_DEBUG "z_decompress%d: bad seq # %d, expected %d\n", |
| state->unit, seq, state->seqno & 0xffff); |
| return DECOMP_ERROR; |
| } |
| ++state->seqno; |
| |
| /* |
| * Fill in the first part of the PPP header. The protocol field |
| * comes from the decompressed data. |
| */ |
| obuf[0] = PPP_ADDRESS(ibuf); |
| obuf[1] = PPP_CONTROL(ibuf); |
| obuf[2] = 0; |
| |
| /* |
| * Set up to call inflate. We set avail_out to 1 initially so we can |
| * look at the first byte of the output and decide whether we have |
| * a 1-byte or 2-byte protocol field. |
| */ |
| state->strm.next_in = ibuf + PPP_HDRLEN + DEFLATE_OVHD; |
| state->strm.avail_in = isize - (PPP_HDRLEN + DEFLATE_OVHD); |
| state->strm.next_out = obuf + 3; |
| state->strm.avail_out = 1; |
| decode_proto = 1; |
| overflow = 0; |
| |
| /* |
| * Call inflate, supplying more input or output as needed. |
| */ |
| for (;;) { |
| r = zlib_inflate(&state->strm, Z_PACKET_FLUSH); |
| if (r != Z_OK) { |
| if (state->debug) |
| printk(KERN_DEBUG "z_decompress%d: inflate returned %d (%s)\n", |
| state->unit, r, (state->strm.msg? state->strm.msg: "")); |
| return DECOMP_FATALERROR; |
| } |
| if (state->strm.avail_out != 0) |
| break; /* all done */ |
| if (decode_proto) { |
| state->strm.avail_out = osize - PPP_HDRLEN; |
| if ((obuf[3] & 1) == 0) { |
| /* 2-byte protocol field */ |
| obuf[2] = obuf[3]; |
| --state->strm.next_out; |
| ++state->strm.avail_out; |
| } |
| decode_proto = 0; |
| } else if (!overflow) { |
| /* |
| * We've filled up the output buffer; the only way to |
| * find out whether inflate has any more characters |
| * left is to give it another byte of output space. |
| */ |
| state->strm.next_out = overflow_buf; |
| state->strm.avail_out = 1; |
| overflow = 1; |
| } else { |
| if (state->debug) |
| printk(KERN_DEBUG "z_decompress%d: ran out of mru\n", |
| state->unit); |
| return DECOMP_FATALERROR; |
| } |
| } |
| |
| if (decode_proto) { |
| if (state->debug) |
| printk(KERN_DEBUG "z_decompress%d: didn't get proto\n", |
| state->unit); |
| return DECOMP_ERROR; |
| } |
| |
| olen = osize + overflow - state->strm.avail_out; |
| state->stats.unc_bytes += olen; |
| state->stats.unc_packets++; |
| state->stats.comp_bytes += isize; |
| state->stats.comp_packets++; |
| |
| return olen; |
| } |
| |
| /** |
| * z_incomp - add incompressible input data to the history. |
| * @arg: pointer to private state for the decompressor |
| * @ibuf: pointer to input packet data |
| * @icnt: length of input data. |
| */ |
| static void z_incomp(void *arg, unsigned char *ibuf, int icnt) |
| { |
| struct ppp_deflate_state *state = (struct ppp_deflate_state *) arg; |
| int proto, r; |
| |
| /* |
| * Check that the protocol is one we handle. |
| */ |
| proto = PPP_PROTOCOL(ibuf); |
| if (proto > 0x3fff || proto == 0xfd || proto == 0xfb) |
| return; |
| |
| ++state->seqno; |
| |
| /* |
| * We start at the either the 1st or 2nd byte of the protocol field, |
| * depending on whether the protocol value is compressible. |
| */ |
| state->strm.next_in = ibuf + 3; |
| state->strm.avail_in = icnt - 3; |
| if (proto > 0xff) { |
| --state->strm.next_in; |
| ++state->strm.avail_in; |
| } |
| |
| r = zlib_inflateIncomp(&state->strm); |
| if (r != Z_OK) { |
| /* gak! */ |
| if (state->debug) { |
| printk(KERN_DEBUG "z_incomp%d: inflateIncomp returned %d (%s)\n", |
| state->unit, r, (state->strm.msg? state->strm.msg: "")); |
| } |
| return; |
| } |
| |
| /* |
| * Update stats. |
| */ |
| state->stats.inc_bytes += icnt; |
| state->stats.inc_packets++; |
| state->stats.unc_bytes += icnt; |
| state->stats.unc_packets++; |
| } |
| |
| /************************************************************* |
| * Module interface table |
| *************************************************************/ |
| |
| /* These are in ppp_generic.c */ |
| extern int ppp_register_compressor (struct compressor *cp); |
| extern void ppp_unregister_compressor (struct compressor *cp); |
| |
| /* |
| * Procedures exported to if_ppp.c. |
| */ |
| static struct compressor ppp_deflate = { |
| .compress_proto = CI_DEFLATE, |
| .comp_alloc = z_comp_alloc, |
| .comp_free = z_comp_free, |
| .comp_init = z_comp_init, |
| .comp_reset = z_comp_reset, |
| .compress = z_compress, |
| .comp_stat = z_comp_stats, |
| .decomp_alloc = z_decomp_alloc, |
| .decomp_free = z_decomp_free, |
| .decomp_init = z_decomp_init, |
| .decomp_reset = z_decomp_reset, |
| .decompress = z_decompress, |
| .incomp = z_incomp, |
| .decomp_stat = z_comp_stats, |
| .owner = THIS_MODULE |
| }; |
| |
| static struct compressor ppp_deflate_draft = { |
| .compress_proto = CI_DEFLATE_DRAFT, |
| .comp_alloc = z_comp_alloc, |
| .comp_free = z_comp_free, |
| .comp_init = z_comp_init, |
| .comp_reset = z_comp_reset, |
| .compress = z_compress, |
| .comp_stat = z_comp_stats, |
| .decomp_alloc = z_decomp_alloc, |
| .decomp_free = z_decomp_free, |
| .decomp_init = z_decomp_init, |
| .decomp_reset = z_decomp_reset, |
| .decompress = z_decompress, |
| .incomp = z_incomp, |
| .decomp_stat = z_comp_stats, |
| .owner = THIS_MODULE |
| }; |
| |
| static int __init deflate_init(void) |
| { |
| int rc; |
| |
| rc = ppp_register_compressor(&ppp_deflate); |
| if (rc) |
| return rc; |
| |
| rc = ppp_register_compressor(&ppp_deflate_draft); |
| if (rc) { |
| ppp_unregister_compressor(&ppp_deflate); |
| return rc; |
| } |
| |
| pr_info("PPP Deflate Compression module registered\n"); |
| return 0; |
| } |
| |
| static void __exit deflate_cleanup(void) |
| { |
| ppp_unregister_compressor(&ppp_deflate); |
| ppp_unregister_compressor(&ppp_deflate_draft); |
| } |
| |
| module_init(deflate_init); |
| module_exit(deflate_cleanup); |
| MODULE_DESCRIPTION("PPP Deflate compression module"); |
| MODULE_LICENSE("Dual BSD/GPL"); |
| MODULE_ALIAS("ppp-compress-" __stringify(CI_DEFLATE)); |
| MODULE_ALIAS("ppp-compress-" __stringify(CI_DEFLATE_DRAFT)); |