Google Git
Sign in
android-kvm / linux / 51ceeb1a8142537b9f65aeaac6c301560a948197 / . / drivers / net / wireless / intel / iwlwifi / dvm / eeprom.c
blob: 931aa3f5798d52e2e1f23614ce9a684b11a0cae5 [file] [log] [blame]
// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
/*
* Copyright (C) 2005-2014, 2018-2019, 2021, 2024 Intel Corporation
*/
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/export.h>
#include "iwl-drv.h"
#include "iwl-debug.h"
#include "iwl-io.h"
#include "iwl-prph.h"
#include "iwl-csr.h"
#include "agn.h"
/* EEPROM offset definitions */
/* indirect access definitions */
#define ADDRESS_MSK 0x0000FFFF
#define INDIRECT_TYPE_MSK 0x000F0000
#define INDIRECT_HOST 0x00010000
#define INDIRECT_GENERAL 0x00020000
#define INDIRECT_REGULATORY 0x00030000
#define INDIRECT_CALIBRATION 0x00040000
#define INDIRECT_PROCESS_ADJST 0x00050000
#define INDIRECT_OTHERS 0x00060000
#define INDIRECT_TXP_LIMIT 0x00070000
#define INDIRECT_TXP_LIMIT_SIZE 0x00080000
#define INDIRECT_ADDRESS 0x00100000
/* corresponding link offsets in EEPROM */
#define EEPROM_LINK_HOST (2*0x64)
#define EEPROM_LINK_GENERAL (2*0x65)
#define EEPROM_LINK_REGULATORY (2*0x66)
#define EEPROM_LINK_CALIBRATION (2*0x67)
#define EEPROM_LINK_PROCESS_ADJST (2*0x68)
#define EEPROM_LINK_OTHERS (2*0x69)
#define EEPROM_LINK_TXP_LIMIT (2*0x6a)
#define EEPROM_LINK_TXP_LIMIT_SIZE (2*0x6b)
/* General */
#define EEPROM_DEVICE_ID (2*0x08) /* 2 bytes */
#define EEPROM_SUBSYSTEM_ID (2*0x0A) /* 2 bytes */
#define EEPROM_MAC_ADDRESS (2*0x15) /* 6 bytes */
#define EEPROM_BOARD_REVISION (2*0x35) /* 2 bytes */
#define EEPROM_BOARD_PBA_NUMBER (2*0x3B+1) /* 9 bytes */
#define EEPROM_VERSION (2*0x44) /* 2 bytes */
#define EEPROM_SKU_CAP (2*0x45) /* 2 bytes */
#define EEPROM_OEM_MODE (2*0x46) /* 2 bytes */
#define EEPROM_RADIO_CONFIG (2*0x48) /* 2 bytes */
#define EEPROM_NUM_MAC_ADDRESS (2*0x4C) /* 2 bytes */
/* calibration */
struct iwl_eeprom_calib_hdr {
u8 version;
u8 pa_type;
__le16 voltage;
} __packed;
#define EEPROM_CALIB_ALL (INDIRECT_ADDRESS | INDIRECT_CALIBRATION)
#define EEPROM_XTAL ((2*0x128) | EEPROM_CALIB_ALL)
/* temperature */
#define EEPROM_KELVIN_TEMPERATURE ((2*0x12A) | EEPROM_CALIB_ALL)
#define EEPROM_RAW_TEMPERATURE ((2*0x12B) | EEPROM_CALIB_ALL)
/* SKU Capabilities (actual values from EEPROM definition) */
enum eeprom_sku_bits {
EEPROM_SKU_CAP_BAND_24GHZ = BIT(4),
EEPROM_SKU_CAP_BAND_52GHZ = BIT(5),
EEPROM_SKU_CAP_11N_ENABLE = BIT(6),
EEPROM_SKU_CAP_AMT_ENABLE = BIT(7),
EEPROM_SKU_CAP_IPAN_ENABLE = BIT(8)
};
/* radio config bits (actual values from EEPROM definition) */
#define EEPROM_RF_CFG_TYPE_MSK(x) (x & 0x3) /* bits 0-1 */
#define EEPROM_RF_CFG_STEP_MSK(x) ((x >> 2) & 0x3) /* bits 2-3 */
#define EEPROM_RF_CFG_DASH_MSK(x) ((x >> 4) & 0x3) /* bits 4-5 */
#define EEPROM_RF_CFG_PNUM_MSK(x) ((x >> 6) & 0x3) /* bits 6-7 */
#define EEPROM_RF_CFG_TX_ANT_MSK(x) ((x >> 8) & 0xF) /* bits 8-11 */
#define EEPROM_RF_CFG_RX_ANT_MSK(x) ((x >> 12) & 0xF) /* bits 12-15 */
/*
* EEPROM bands
* These are the channel numbers from each band in the order
* that they are stored in the EEPROM band information. Note
* that EEPROM bands aren't the same as mac80211 bands, and
* there are even special "ht40 bands" in the EEPROM.
*/
static const u8 iwl_eeprom_band_1[14] = { /* 2.4 GHz */
1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14
};
static const u8 iwl_eeprom_band_2[] = { /* 4915-5080MHz */
183, 184, 185, 187, 188, 189, 192, 196, 7, 8, 11, 12, 16
};
static const u8 iwl_eeprom_band_3[] = { /* 5170-5320MHz */
34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64
};
static const u8 iwl_eeprom_band_4[] = { /* 5500-5700MHz */
100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140
};
static const u8 iwl_eeprom_band_5[] = { /* 5725-5825MHz */
145, 149, 153, 157, 161, 165
};
static const u8 iwl_eeprom_band_6[] = { /* 2.4 ht40 channel */
1, 2, 3, 4, 5, 6, 7
};
static const u8 iwl_eeprom_band_7[] = { /* 5.2 ht40 channel */
36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157
};
#define IWL_NUM_CHANNELS (ARRAY_SIZE(iwl_eeprom_band_1) + \
ARRAY_SIZE(iwl_eeprom_band_2) + \
ARRAY_SIZE(iwl_eeprom_band_3) + \
ARRAY_SIZE(iwl_eeprom_band_4) + \
ARRAY_SIZE(iwl_eeprom_band_5))
/* rate data (static) */
static struct ieee80211_rate iwl_cfg80211_rates[] = {
{ .bitrate = 1 * 10, .hw_value = 0, .hw_value_short = 0, },
{ .bitrate = 2 * 10, .hw_value = 1, .hw_value_short = 1,
.flags = IEEE80211_RATE_SHORT_PREAMBLE, },
{ .bitrate = 5.5 * 10, .hw_value = 2, .hw_value_short = 2,
.flags = IEEE80211_RATE_SHORT_PREAMBLE, },
{ .bitrate = 11 * 10, .hw_value = 3, .hw_value_short = 3,
.flags = IEEE80211_RATE_SHORT_PREAMBLE, },
{ .bitrate = 6 * 10, .hw_value = 4, .hw_value_short = 4, },
{ .bitrate = 9 * 10, .hw_value = 5, .hw_value_short = 5, },
{ .bitrate = 12 * 10, .hw_value = 6, .hw_value_short = 6, },
{ .bitrate = 18 * 10, .hw_value = 7, .hw_value_short = 7, },
{ .bitrate = 24 * 10, .hw_value = 8, .hw_value_short = 8, },
{ .bitrate = 36 * 10, .hw_value = 9, .hw_value_short = 9, },
{ .bitrate = 48 * 10, .hw_value = 10, .hw_value_short = 10, },
{ .bitrate = 54 * 10, .hw_value = 11, .hw_value_short = 11, },
};
#define RATES_24_OFFS 0
#define N_RATES_24 ARRAY_SIZE(iwl_cfg80211_rates)
#define RATES_52_OFFS 4
#define N_RATES_52 (N_RATES_24 - RATES_52_OFFS)
/* EEPROM reading functions */
static u16 iwl_eeprom_query16(const u8 *eeprom, size_t eeprom_size, int offset)
{
if (WARN_ON(offset + sizeof(u16) > eeprom_size))
return 0;
return le16_to_cpup((__le16 *)(eeprom + offset));
}
static u32 eeprom_indirect_address(const u8 *eeprom, size_t eeprom_size,
u32 address)
{
u16 offset = 0;
if ((address & INDIRECT_ADDRESS) == 0)
return address;
switch (address & INDIRECT_TYPE_MSK) {
case INDIRECT_HOST:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_HOST);
break;
case INDIRECT_GENERAL:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_GENERAL);
break;
case INDIRECT_REGULATORY:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_REGULATORY);
break;
case INDIRECT_TXP_LIMIT:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_TXP_LIMIT);
break;
case INDIRECT_TXP_LIMIT_SIZE:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_TXP_LIMIT_SIZE);
break;
case INDIRECT_CALIBRATION:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_CALIBRATION);
break;
case INDIRECT_PROCESS_ADJST:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_PROCESS_ADJST);
break;
case INDIRECT_OTHERS:
offset = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_LINK_OTHERS);
break;
default:
WARN_ON(1);
break;
}
/* translate the offset from words to byte */
return (address & ADDRESS_MSK) + (offset << 1);
}
static const u8 *iwl_eeprom_query_addr(const u8 *eeprom, size_t eeprom_size,
u32 offset)
{
u32 address = eeprom_indirect_address(eeprom, eeprom_size, offset);
if (WARN_ON(address >= eeprom_size))
return NULL;
return &eeprom[address];
}
static int iwl_eeprom_read_calib(const u8 *eeprom, size_t eeprom_size,
struct iwl_nvm_data *data)
{
struct iwl_eeprom_calib_hdr *hdr;
hdr = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_CALIB_ALL);
if (!hdr)
return -ENODATA;
data->calib_version = hdr->version;
data->calib_voltage = hdr->voltage;
return 0;
}
/**
* enum iwl_eeprom_channel_flags - channel flags in EEPROM
* @EEPROM_CHANNEL_VALID: channel is usable for this SKU/geo
* @EEPROM_CHANNEL_IBSS: usable as an IBSS channel
* @EEPROM_CHANNEL_ACTIVE: active scanning allowed
* @EEPROM_CHANNEL_RADAR: radar detection required
* @EEPROM_CHANNEL_WIDE: 20 MHz channel okay (?)
* @EEPROM_CHANNEL_DFS: dynamic freq selection candidate
*/
enum iwl_eeprom_channel_flags {
EEPROM_CHANNEL_VALID = BIT(0),
EEPROM_CHANNEL_IBSS = BIT(1),
EEPROM_CHANNEL_ACTIVE = BIT(3),
EEPROM_CHANNEL_RADAR = BIT(4),
EEPROM_CHANNEL_WIDE = BIT(5),
EEPROM_CHANNEL_DFS = BIT(7),
};
/**
* struct iwl_eeprom_channel - EEPROM channel data
* @flags: %EEPROM_CHANNEL_* flags
* @max_power_avg: max power (in dBm) on this channel, at most 31 dBm
*/
struct iwl_eeprom_channel {
u8 flags;
s8 max_power_avg;
} __packed;
enum iwl_eeprom_enhanced_txpwr_flags {
IWL_EEPROM_ENH_TXP_FL_VALID = BIT(0),
IWL_EEPROM_ENH_TXP_FL_BAND_52G = BIT(1),
IWL_EEPROM_ENH_TXP_FL_OFDM = BIT(2),
IWL_EEPROM_ENH_TXP_FL_40MHZ = BIT(3),
IWL_EEPROM_ENH_TXP_FL_HT_AP = BIT(4),
IWL_EEPROM_ENH_TXP_FL_RES1 = BIT(5),
IWL_EEPROM_ENH_TXP_FL_RES2 = BIT(6),
IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE = BIT(7),
};
/**
* struct iwl_eeprom_enhanced_txpwr - enhanced regulatory TX power limits
* @flags: entry flags
* @channel: channel number
* @chain_a_max: chain a max power in 1/2 dBm
* @chain_b_max: chain b max power in 1/2 dBm
* @chain_c_max: chain c max power in 1/2 dBm
* @delta_20_in_40: 20-in-40 deltas (hi/lo)
* @mimo2_max: mimo2 max power in 1/2 dBm
* @mimo3_max: mimo3 max power in 1/2 dBm
*
* This structure presents the enhanced regulatory tx power limit layout
* in an EEPROM image.
*/
struct iwl_eeprom_enhanced_txpwr {
u8 flags;
u8 channel;
s8 chain_a_max;
s8 chain_b_max;
s8 chain_c_max;
u8 delta_20_in_40;
s8 mimo2_max;
s8 mimo3_max;
} __packed;
static s8 iwl_get_max_txpwr_half_dbm(const struct iwl_nvm_data *data,
struct iwl_eeprom_enhanced_txpwr *txp)
{
s8 result = 0; /* (.5 dBm) */
/* Take the highest tx power from any valid chains */
if (data->valid_tx_ant & ANT_A && txp->chain_a_max > result)
result = txp->chain_a_max;
if (data->valid_tx_ant & ANT_B && txp->chain_b_max > result)
result = txp->chain_b_max;
if (data->valid_tx_ant & ANT_C && txp->chain_c_max > result)
result = txp->chain_c_max;
if ((data->valid_tx_ant == ANT_AB ||
data->valid_tx_ant == ANT_BC ||
data->valid_tx_ant == ANT_AC) && txp->mimo2_max > result)
result = txp->mimo2_max;
if (data->valid_tx_ant == ANT_ABC && txp->mimo3_max > result)
result = txp->mimo3_max;
return result;
}
#define EEPROM_TXP_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT)
#define EEPROM_TXP_ENTRY_LEN sizeof(struct iwl_eeprom_enhanced_txpwr)
#define EEPROM_TXP_SZ_OFFS (0x00 | INDIRECT_ADDRESS | INDIRECT_TXP_LIMIT_SIZE)
#define TXP_CHECK_AND_PRINT(x) \
((txp->flags & IWL_EEPROM_ENH_TXP_FL_##x) ? # x " " : "")
static void
iwl_eeprom_enh_txp_read_element(struct iwl_nvm_data *data,
struct iwl_eeprom_enhanced_txpwr *txp,
int n_channels, s8 max_txpower_avg)
{
int ch_idx;
enum nl80211_band band;
band = txp->flags & IWL_EEPROM_ENH_TXP_FL_BAND_52G ?
NL80211_BAND_5GHZ : NL80211_BAND_2GHZ;
for (ch_idx = 0; ch_idx < n_channels; ch_idx++) {
struct ieee80211_channel *chan = &data->channels[ch_idx];
/* update matching channel or from common data only */
if (txp->channel != 0 && chan->hw_value != txp->channel)
continue;
/* update matching band only */
if (band != chan->band)
continue;
if (chan->max_power < max_txpower_avg &&
!(txp->flags & IWL_EEPROM_ENH_TXP_FL_40MHZ))
chan->max_power = max_txpower_avg;
}
}
static void iwl_eeprom_enhanced_txpower(struct device *dev,
struct iwl_nvm_data *data,
const u8 *eeprom, size_t eeprom_size,
int n_channels)
{
struct iwl_eeprom_enhanced_txpwr *txp_array, *txp;
int idx, entries;
__le16 *txp_len;
s8 max_txp_avg_halfdbm;
BUILD_BUG_ON(sizeof(struct iwl_eeprom_enhanced_txpwr) != 8);
/* the length is in 16-bit words, but we want entries */
txp_len = (__le16 *)iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_TXP_SZ_OFFS);
entries = le16_to_cpup(txp_len) * 2 / EEPROM_TXP_ENTRY_LEN;
txp_array = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_TXP_OFFS);
for (idx = 0; idx < entries; idx++) {
txp = &txp_array[idx];
/* skip invalid entries */
if (!(txp->flags & IWL_EEPROM_ENH_TXP_FL_VALID))
continue;
IWL_DEBUG_EEPROM(dev, "%s %d:\t %s%s%s%s%s%s%s%s (0x%02x)\n",
(txp->channel && (txp->flags &
IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE)) ?
"Common " : (txp->channel) ?
"Channel" : "Common",
(txp->channel),
TXP_CHECK_AND_PRINT(VALID),
TXP_CHECK_AND_PRINT(BAND_52G),
TXP_CHECK_AND_PRINT(OFDM),
TXP_CHECK_AND_PRINT(40MHZ),
TXP_CHECK_AND_PRINT(HT_AP),
TXP_CHECK_AND_PRINT(RES1),
TXP_CHECK_AND_PRINT(RES2),
TXP_CHECK_AND_PRINT(COMMON_TYPE),
txp->flags);
IWL_DEBUG_EEPROM(dev,
"\t\t chain_A: %d chain_B: %d chain_C: %d\n",
txp->chain_a_max, txp->chain_b_max,
txp->chain_c_max);
IWL_DEBUG_EEPROM(dev,
"\t\t MIMO2: %d MIMO3: %d High 20_on_40: 0x%02x Low 20_on_40: 0x%02x\n",
txp->mimo2_max, txp->mimo3_max,
((txp->delta_20_in_40 & 0xf0) >> 4),
(txp->delta_20_in_40 & 0x0f));
max_txp_avg_halfdbm = iwl_get_max_txpwr_half_dbm(data, txp);
iwl_eeprom_enh_txp_read_element(data, txp, n_channels,
DIV_ROUND_UP(max_txp_avg_halfdbm, 2));
if (max_txp_avg_halfdbm > data->max_tx_pwr_half_dbm)
data->max_tx_pwr_half_dbm = max_txp_avg_halfdbm;
}
}
static void iwl_init_band_reference(const struct iwl_cfg *cfg,
const u8 *eeprom, size_t eeprom_size,
int eeprom_band, int *eeprom_ch_count,
const struct iwl_eeprom_channel **ch_info,
const u8 **eeprom_ch_array)
{
u32 offset = cfg->eeprom_params->regulatory_bands[eeprom_band - 1];
offset |= INDIRECT_ADDRESS | INDIRECT_REGULATORY;
*ch_info = (void *)iwl_eeprom_query_addr(eeprom, eeprom_size, offset);
switch (eeprom_band) {
case 1: /* 2.4GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_1);
*eeprom_ch_array = iwl_eeprom_band_1;
break;
case 2: /* 4.9GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_2);
*eeprom_ch_array = iwl_eeprom_band_2;
break;
case 3: /* 5.2GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_3);
*eeprom_ch_array = iwl_eeprom_band_3;
break;
case 4: /* 5.5GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_4);
*eeprom_ch_array = iwl_eeprom_band_4;
break;
case 5: /* 5.7GHz band */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_5);
*eeprom_ch_array = iwl_eeprom_band_5;
break;
case 6: /* 2.4GHz ht40 channels */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_6);
*eeprom_ch_array = iwl_eeprom_band_6;
break;
case 7: /* 5 GHz ht40 channels */
*eeprom_ch_count = ARRAY_SIZE(iwl_eeprom_band_7);
*eeprom_ch_array = iwl_eeprom_band_7;
break;
default:
*eeprom_ch_count = 0;
*eeprom_ch_array = NULL;
WARN_ON(1);
}
}
#define CHECK_AND_PRINT(x) \
((eeprom_ch->flags & EEPROM_CHANNEL_##x) ? # x " " : "")
static void iwl_mod_ht40_chan_info(struct device *dev,
struct iwl_nvm_data *data, int n_channels,
enum nl80211_band band, u16 channel,
const struct iwl_eeprom_channel *eeprom_ch,
u8 clear_ht40_extension_channel)
{
struct ieee80211_channel *chan = NULL;
int i;
for (i = 0; i < n_channels; i++) {
if (data->channels[i].band != band)
continue;
if (data->channels[i].hw_value != channel)
continue;
chan = &data->channels[i];
break;
}
if (!chan)
return;
IWL_DEBUG_EEPROM(dev,
"HT40 Ch. %d [%sGHz] %s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
channel,
band == NL80211_BAND_5GHZ ? "5.2" : "2.4",
CHECK_AND_PRINT(IBSS),
CHECK_AND_PRINT(ACTIVE),
CHECK_AND_PRINT(RADAR),
CHECK_AND_PRINT(WIDE),
CHECK_AND_PRINT(DFS),
eeprom_ch->flags,
eeprom_ch->max_power_avg,
((eeprom_ch->flags & EEPROM_CHANNEL_IBSS) &&
!(eeprom_ch->flags & EEPROM_CHANNEL_RADAR)) ? ""
: "not ");
if (eeprom_ch->flags & EEPROM_CHANNEL_VALID)
chan->flags &= ~clear_ht40_extension_channel;
}
#define CHECK_AND_PRINT_I(x) \
((eeprom_ch_info[ch_idx].flags & EEPROM_CHANNEL_##x) ? # x " " : "")
static int iwl_init_channel_map(struct device *dev, const struct iwl_cfg *cfg,
struct iwl_nvm_data *data,
const u8 *eeprom, size_t eeprom_size)
{
int band, ch_idx;
const struct iwl_eeprom_channel *eeprom_ch_info;
const u8 *eeprom_ch_array;
int eeprom_ch_count;
int n_channels = 0;
/*
* Loop through the 5 EEPROM bands and add them to the parse list
*/
for (band = 1; band <= 5; band++) {
struct ieee80211_channel *channel;
iwl_init_band_reference(cfg, eeprom, eeprom_size, band,
&eeprom_ch_count, &eeprom_ch_info,
&eeprom_ch_array);
/* Loop through each band adding each of the channels */
for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) {
const struct iwl_eeprom_channel *eeprom_ch;
eeprom_ch = &eeprom_ch_info[ch_idx];
if (!(eeprom_ch->flags & EEPROM_CHANNEL_VALID)) {
IWL_DEBUG_EEPROM(dev,
"Ch. %d Flags %x [%sGHz] - No traffic\n",
eeprom_ch_array[ch_idx],
eeprom_ch_info[ch_idx].flags,
(band != 1) ? "5.2" : "2.4");
continue;
}
channel = &data->channels[n_channels];
n_channels++;
channel->hw_value = eeprom_ch_array[ch_idx];
channel->band = (band == 1) ? NL80211_BAND_2GHZ
: NL80211_BAND_5GHZ;
channel->center_freq =
ieee80211_channel_to_frequency(
channel->hw_value, channel->band);
/* set no-HT40, will enable as appropriate later */
channel->flags = IEEE80211_CHAN_NO_HT40;
if (!(eeprom_ch->flags & EEPROM_CHANNEL_IBSS))
channel->flags |= IEEE80211_CHAN_NO_IR;
if (!(eeprom_ch->flags & EEPROM_CHANNEL_ACTIVE))
channel->flags |= IEEE80211_CHAN_NO_IR;
if (eeprom_ch->flags & EEPROM_CHANNEL_RADAR)
channel->flags |= IEEE80211_CHAN_RADAR;
/* Initialize regulatory-based run-time data */
channel->max_power =
eeprom_ch_info[ch_idx].max_power_avg;
IWL_DEBUG_EEPROM(dev,
"Ch. %d [%sGHz] %s%s%s%s%s%s(0x%02x %ddBm): Ad-Hoc %ssupported\n",
channel->hw_value,
(band != 1) ? "5.2" : "2.4",
CHECK_AND_PRINT_I(VALID),
CHECK_AND_PRINT_I(IBSS),
CHECK_AND_PRINT_I(ACTIVE),
CHECK_AND_PRINT_I(RADAR),
CHECK_AND_PRINT_I(WIDE),
CHECK_AND_PRINT_I(DFS),
eeprom_ch_info[ch_idx].flags,
eeprom_ch_info[ch_idx].max_power_avg,
((eeprom_ch_info[ch_idx].flags &
EEPROM_CHANNEL_IBSS) &&
!(eeprom_ch_info[ch_idx].flags &
EEPROM_CHANNEL_RADAR))
? "" : "not ");
}
}
if (cfg->eeprom_params->enhanced_txpower) {
/*
* for newer device (6000 series and up)
* EEPROM contain enhanced tx power information
* driver need to process addition information
* to determine the max channel tx power limits
*/
iwl_eeprom_enhanced_txpower(dev, data, eeprom, eeprom_size,
n_channels);
} else {
/* All others use data from channel map */
int i;
data->max_tx_pwr_half_dbm = -128;
for (i = 0; i < n_channels; i++)
data->max_tx_pwr_half_dbm =
max_t(s8, data->max_tx_pwr_half_dbm,
data->channels[i].max_power * 2);
}
/* Check if we do have HT40 channels */
if (cfg->eeprom_params->regulatory_bands[5] ==
EEPROM_REGULATORY_BAND_NO_HT40 &&
cfg->eeprom_params->regulatory_bands[6] ==
EEPROM_REGULATORY_BAND_NO_HT40)
return n_channels;
/* Two additional EEPROM bands for 2.4 and 5 GHz HT40 channels */
for (band = 6; band <= 7; band++) {
enum nl80211_band ieeeband;
iwl_init_band_reference(cfg, eeprom, eeprom_size, band,
&eeprom_ch_count, &eeprom_ch_info,
&eeprom_ch_array);
/* EEPROM band 6 is 2.4, band 7 is 5 GHz */
ieeeband = (band == 6) ? NL80211_BAND_2GHZ
: NL80211_BAND_5GHZ;
/* Loop through each band adding each of the channels */
for (ch_idx = 0; ch_idx < eeprom_ch_count; ch_idx++) {
/* Set up driver's info for lower half */
iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband,
eeprom_ch_array[ch_idx],
&eeprom_ch_info[ch_idx],
IEEE80211_CHAN_NO_HT40PLUS);
/* Set up driver's info for upper half */
iwl_mod_ht40_chan_info(dev, data, n_channels, ieeeband,
eeprom_ch_array[ch_idx] + 4,
&eeprom_ch_info[ch_idx],
IEEE80211_CHAN_NO_HT40MINUS);
}
}
return n_channels;
}
/*
* EEPROM access time values:
*
* Driver initiates EEPROM read by writing byte address << 1 to CSR_EEPROM_REG.
* Driver then polls CSR_EEPROM_REG for CSR_EEPROM_REG_READ_VALID_MSK (0x1).
* When polling, wait 10 uSec between polling loops, up to a maximum 5000 uSec.
* Driver reads 16-bit value from bits 31-16 of CSR_EEPROM_REG.
*/
#define IWL_EEPROM_ACCESS_TIMEOUT 5000 /* uSec */
/*
* The device's EEPROM semaphore prevents conflicts between driver and uCode
* when accessing the EEPROM; each access is a series of pulses to/from the
* EEPROM chip, not a single event, so even reads could conflict if they
* weren't arbitrated by the semaphore.
*/
#define IWL_EEPROM_SEM_TIMEOUT 10 /* microseconds */
#define IWL_EEPROM_SEM_RETRY_LIMIT 1000 /* number of attempts (not time) */
static int iwl_eeprom_acquire_semaphore(struct iwl_trans *trans)
{
u16 count;
int ret;
for (count = 0; count < IWL_EEPROM_SEM_RETRY_LIMIT; count++) {
/* Request semaphore */
iwl_set_bit(trans, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
/* See if we got it */
ret = iwl_poll_bit(trans, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM,
IWL_EEPROM_SEM_TIMEOUT);
if (ret >= 0) {
IWL_DEBUG_EEPROM(trans->dev,
"Acquired semaphore after %d tries.\n",
count+1);
return ret;
}
}
return ret;
}
static void iwl_eeprom_release_semaphore(struct iwl_trans *trans)
{
iwl_clear_bit(trans, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_EEPROM_OWN_SEM);
}
static int iwl_eeprom_verify_signature(struct iwl_trans *trans, bool nvm_is_otp)
{
u32 gp = iwl_read32(trans, CSR_EEPROM_GP) & CSR_EEPROM_GP_VALID_MSK;
IWL_DEBUG_EEPROM(trans->dev, "EEPROM signature=0x%08x\n", gp);
switch (gp) {
case CSR_EEPROM_GP_BAD_SIG_EEP_GOOD_SIG_OTP:
if (!nvm_is_otp) {
IWL_ERR(trans, "EEPROM with bad signature: 0x%08x\n",
gp);
return -ENOENT;
}
return 0;
case CSR_EEPROM_GP_GOOD_SIG_EEP_LESS_THAN_4K:
case CSR_EEPROM_GP_GOOD_SIG_EEP_MORE_THAN_4K:
if (nvm_is_otp) {
IWL_ERR(trans, "OTP with bad signature: 0x%08x\n", gp);
return -ENOENT;
}
return 0;
case CSR_EEPROM_GP_BAD_SIGNATURE_BOTH_EEP_AND_OTP:
default:
IWL_ERR(trans,
"bad EEPROM/OTP signature, type=%s, EEPROM_GP=0x%08x\n",
nvm_is_otp ? "OTP" : "EEPROM", gp);
return -ENOENT;
}
}
/******************************************************************************
*
* OTP related functions
*
******************************************************************************/
static void iwl_set_otp_access_absolute(struct iwl_trans *trans)
{
iwl_read32(trans, CSR_OTP_GP_REG);
iwl_clear_bit(trans, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_OTP_ACCESS_MODE);
}
static int iwl_nvm_is_otp(struct iwl_trans *trans)
{
u32 otpgp;
/* OTP only valid for CP/PP and after */
switch (trans->hw_rev & CSR_HW_REV_TYPE_MSK) {
case CSR_HW_REV_TYPE_NONE:
IWL_ERR(trans, "Unknown hardware type\n");
return -EIO;
case CSR_HW_REV_TYPE_5300:
case CSR_HW_REV_TYPE_5350:
case CSR_HW_REV_TYPE_5100:
case CSR_HW_REV_TYPE_5150:
return 0;
default:
otpgp = iwl_read32(trans, CSR_OTP_GP_REG);
if (otpgp & CSR_OTP_GP_REG_DEVICE_SELECT)
return 1;
return 0;
}
}
static int iwl_init_otp_access(struct iwl_trans *trans)
{
int ret;
ret = iwl_finish_nic_init(trans);
if (ret)
return ret;
iwl_set_bits_prph(trans, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_RESET_REQ);
udelay(5);
iwl_clear_bits_prph(trans, APMG_PS_CTRL_REG,
APMG_PS_CTRL_VAL_RESET_REQ);
/*
* CSR auto clock gate disable bit -
* this is only applicable for HW with OTP shadow RAM
*/
if (trans->trans_cfg->base_params->shadow_ram_support)
iwl_set_bit(trans, CSR_DBG_LINK_PWR_MGMT_REG,
CSR_RESET_LINK_PWR_MGMT_DISABLED);
return 0;
}
static int iwl_read_otp_word(struct iwl_trans *trans, u16 addr,
__le16 *eeprom_data)
{
int ret = 0;
u32 r;
u32 otpgp;
iwl_write32(trans, CSR_EEPROM_REG,
CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
ret = iwl_poll_bit(trans, CSR_EEPROM_REG,
CSR_EEPROM_REG_READ_VALID_MSK,
CSR_EEPROM_REG_READ_VALID_MSK,
IWL_EEPROM_ACCESS_TIMEOUT);
if (ret < 0) {
IWL_ERR(trans, "Time out reading OTP[%d]\n", addr);
return ret;
}
r = iwl_read32(trans, CSR_EEPROM_REG);
/* check for ECC errors: */
otpgp = iwl_read32(trans, CSR_OTP_GP_REG);
if (otpgp & CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK) {
/* stop in this case */
/* set the uncorrectable OTP ECC bit for acknowledgment */
iwl_set_bit(trans, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
IWL_ERR(trans, "Uncorrectable OTP ECC error, abort OTP read\n");
return -EINVAL;
}
if (otpgp & CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK) {
/* continue in this case */
/* set the correctable OTP ECC bit for acknowledgment */
iwl_set_bit(trans, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK);
IWL_ERR(trans, "Correctable OTP ECC error, continue read\n");
}
*eeprom_data = cpu_to_le16(r >> 16);
return 0;
}
/*
* iwl_is_otp_empty: check for empty OTP
*/
static bool iwl_is_otp_empty(struct iwl_trans *trans)
{
u16 next_link_addr = 0;
__le16 link_value;
bool is_empty = false;
/* locate the beginning of OTP link list */
if (!iwl_read_otp_word(trans, next_link_addr, &link_value)) {
if (!link_value) {
IWL_ERR(trans, "OTP is empty\n");
is_empty = true;
}
} else {
IWL_ERR(trans, "Unable to read first block of OTP list.\n");
is_empty = true;
}
return is_empty;
}
/*
* iwl_find_otp_image: find EEPROM image in OTP
* finding the OTP block that contains the EEPROM image.
* the last valid block on the link list (the block _before_ the last block)
* is the block we should read and used to configure the device.
* If all the available OTP blocks are full, the last block will be the block
* we should read and used to configure the device.
* only perform this operation if shadow RAM is disabled
*/
static int iwl_find_otp_image(struct iwl_trans *trans,
u16 *validblockaddr)
{
u16 next_link_addr = 0, valid_addr;
__le16 link_value = 0;
int usedblocks = 0;
/* set addressing mode to absolute to traverse the link list */
iwl_set_otp_access_absolute(trans);
/* checking for empty OTP or error */
if (iwl_is_otp_empty(trans))
return -EINVAL;
/*
* start traverse link list
* until reach the max number of OTP blocks
* different devices have different number of OTP blocks
*/
do {
/* save current valid block address
* check for more block on the link list
*/
valid_addr = next_link_addr;
next_link_addr = le16_to_cpu(link_value) * sizeof(u16);
IWL_DEBUG_EEPROM(trans->dev, "OTP blocks %d addr 0x%x\n",
usedblocks, next_link_addr);
if (iwl_read_otp_word(trans, next_link_addr, &link_value))
return -EINVAL;
if (!link_value) {
/*
* reach the end of link list, return success and
* set address point to the starting address
* of the image
*/
*validblockaddr = valid_addr;
/* skip first 2 bytes (link list pointer) */
*validblockaddr += 2;
return 0;
}
/* more in the link list, continue */
usedblocks++;
} while (usedblocks <= trans->trans_cfg->base_params->max_ll_items);
/* OTP has no valid blocks */
IWL_DEBUG_EEPROM(trans->dev, "OTP has no valid blocks\n");
return -EINVAL;
}
/*
* iwl_read_eeprom - read EEPROM contents
*
* Load the EEPROM contents from adapter and return it
* and its size.
*
* NOTE: This routine uses the non-debug IO access functions.
*/
int iwl_read_eeprom(struct iwl_trans *trans, u8 **eeprom, size_t *eeprom_size)
{
__le16 *e;
u32 gp = iwl_read32(trans, CSR_EEPROM_GP);
int sz;
int ret;
u16 addr;
u16 validblockaddr = 0;
u16 cache_addr = 0;
int nvm_is_otp;
if (!eeprom || !eeprom_size)
return -EINVAL;
nvm_is_otp = iwl_nvm_is_otp(trans);
if (nvm_is_otp < 0)
return nvm_is_otp;
sz = trans->trans_cfg->base_params->eeprom_size;
IWL_DEBUG_EEPROM(trans->dev, "NVM size = %d\n", sz);
e = kmalloc(sz, GFP_KERNEL);
if (!e)
return -ENOMEM;
ret = iwl_eeprom_verify_signature(trans, nvm_is_otp);
if (ret < 0) {
IWL_ERR(trans, "EEPROM not found, EEPROM_GP=0x%08x\n", gp);
goto err_free;
}
/* Make sure driver (instead of uCode) is allowed to read EEPROM */
ret = iwl_eeprom_acquire_semaphore(trans);
if (ret < 0) {
IWL_ERR(trans, "Failed to acquire EEPROM semaphore.\n");
goto err_free;
}
if (nvm_is_otp) {
ret = iwl_init_otp_access(trans);
if (ret) {
IWL_ERR(trans, "Failed to initialize OTP access.\n");
goto err_unlock;
}
iwl_write32(trans, CSR_EEPROM_GP,
iwl_read32(trans, CSR_EEPROM_GP) &
~CSR_EEPROM_GP_IF_OWNER_MSK);
iwl_set_bit(trans, CSR_OTP_GP_REG,
CSR_OTP_GP_REG_ECC_CORR_STATUS_MSK |
CSR_OTP_GP_REG_ECC_UNCORR_STATUS_MSK);
/* traversing the linked list if no shadow ram supported */
if (!trans->trans_cfg->base_params->shadow_ram_support) {
ret = iwl_find_otp_image(trans, &validblockaddr);
if (ret)
goto err_unlock;
}
for (addr = validblockaddr; addr < validblockaddr + sz;
addr += sizeof(u16)) {
__le16 eeprom_data;
ret = iwl_read_otp_word(trans, addr, &eeprom_data);
if (ret)
goto err_unlock;
e[cache_addr / 2] = eeprom_data;
cache_addr += sizeof(u16);
}
} else {
/* eeprom is an array of 16bit values */
for (addr = 0; addr < sz; addr += sizeof(u16)) {
u32 r;
iwl_write32(trans, CSR_EEPROM_REG,
CSR_EEPROM_REG_MSK_ADDR & (addr << 1));
ret = iwl_poll_bit(trans, CSR_EEPROM_REG,
CSR_EEPROM_REG_READ_VALID_MSK,
CSR_EEPROM_REG_READ_VALID_MSK,
IWL_EEPROM_ACCESS_TIMEOUT);
if (ret < 0) {
IWL_ERR(trans,
"Time out reading EEPROM[%d]\n", addr);
goto err_unlock;
}
r = iwl_read32(trans, CSR_EEPROM_REG);
e[addr / 2] = cpu_to_le16(r >> 16);
}
}
IWL_DEBUG_EEPROM(trans->dev, "NVM Type: %s\n",
nvm_is_otp ? "OTP" : "EEPROM");
iwl_eeprom_release_semaphore(trans);
*eeprom_size = sz;
*eeprom = (u8 *)e;
return 0;
err_unlock:
iwl_eeprom_release_semaphore(trans);
err_free:
kfree(e);
return ret;
}
static void iwl_init_sbands(struct iwl_trans *trans, const struct iwl_cfg *cfg,
struct iwl_nvm_data *data,
const u8 *eeprom, size_t eeprom_size)
{
struct device *dev = trans->dev;
int n_channels = iwl_init_channel_map(dev, cfg, data,
eeprom, eeprom_size);
int n_used = 0;
struct ieee80211_supported_band *sband;
sband = &data->bands[NL80211_BAND_2GHZ];
sband->band = NL80211_BAND_2GHZ;
sband->bitrates = &iwl_cfg80211_rates[RATES_24_OFFS];
sband->n_bitrates = N_RATES_24;
n_used += iwl_init_sband_channels(data, sband, n_channels,
NL80211_BAND_2GHZ);
iwl_init_ht_hw_capab(trans, data, &sband->ht_cap, NL80211_BAND_2GHZ,
data->valid_tx_ant, data->valid_rx_ant);
sband = &data->bands[NL80211_BAND_5GHZ];
sband->band = NL80211_BAND_5GHZ;
sband->bitrates = &iwl_cfg80211_rates[RATES_52_OFFS];
sband->n_bitrates = N_RATES_52;
n_used += iwl_init_sband_channels(data, sband, n_channels,
NL80211_BAND_5GHZ);
iwl_init_ht_hw_capab(trans, data, &sband->ht_cap, NL80211_BAND_5GHZ,
data->valid_tx_ant, data->valid_rx_ant);
if (n_channels != n_used)
IWL_ERR_DEV(dev, "EEPROM: used only %d of %d channels\n",
n_used, n_channels);
}
/* EEPROM data functions */
struct iwl_nvm_data *
iwl_parse_eeprom_data(struct iwl_trans *trans, const struct iwl_cfg *cfg,
const u8 *eeprom, size_t eeprom_size)
{
struct iwl_nvm_data *data;
struct device *dev = trans->dev;
const void *tmp;
u16 radio_cfg, sku;
if (WARN_ON(!cfg || !cfg->eeprom_params))
return NULL;
data = kzalloc(struct_size(data, channels, IWL_NUM_CHANNELS),
GFP_KERNEL);
if (!data)
return NULL;
/* get MAC address(es) */
tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_MAC_ADDRESS);
if (!tmp)
goto err_free;
memcpy(data->hw_addr, tmp, ETH_ALEN);
data->n_hw_addrs = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_NUM_MAC_ADDRESS);
if (iwl_eeprom_read_calib(eeprom, eeprom_size, data))
goto err_free;
tmp = iwl_eeprom_query_addr(eeprom, eeprom_size, EEPROM_XTAL);
if (!tmp)
goto err_free;
memcpy(data->xtal_calib, tmp, sizeof(data->xtal_calib));
tmp = iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_RAW_TEMPERATURE);
if (!tmp)
goto err_free;
data->raw_temperature = *(__le16 *)tmp;
tmp = iwl_eeprom_query_addr(eeprom, eeprom_size,
EEPROM_KELVIN_TEMPERATURE);
if (!tmp)
goto err_free;
data->kelvin_temperature = *(__le16 *)tmp;
data->kelvin_voltage = *((__le16 *)tmp + 1);
radio_cfg =
iwl_eeprom_query16(eeprom, eeprom_size, EEPROM_RADIO_CONFIG);
data->radio_cfg_dash = EEPROM_RF_CFG_DASH_MSK(radio_cfg);
data->radio_cfg_pnum = EEPROM_RF_CFG_PNUM_MSK(radio_cfg);
data->radio_cfg_step = EEPROM_RF_CFG_STEP_MSK(radio_cfg);
data->radio_cfg_type = EEPROM_RF_CFG_TYPE_MSK(radio_cfg);
data->valid_rx_ant = EEPROM_RF_CFG_RX_ANT_MSK(radio_cfg);
data->valid_tx_ant = EEPROM_RF_CFG_TX_ANT_MSK(radio_cfg);
sku = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_SKU_CAP);
data->sku_cap_11n_enable = sku & EEPROM_SKU_CAP_11N_ENABLE;
data->sku_cap_amt_enable = sku & EEPROM_SKU_CAP_AMT_ENABLE;
data->sku_cap_band_24ghz_enable = sku & EEPROM_SKU_CAP_BAND_24GHZ;
data->sku_cap_band_52ghz_enable = sku & EEPROM_SKU_CAP_BAND_52GHZ;
data->sku_cap_ipan_enable = sku & EEPROM_SKU_CAP_IPAN_ENABLE;
if (iwlwifi_mod_params.disable_11n & IWL_DISABLE_HT_ALL)
data->sku_cap_11n_enable = false;
data->nvm_version = iwl_eeprom_query16(eeprom, eeprom_size,
EEPROM_VERSION);
/* check overrides (some devices have wrong EEPROM) */
if (cfg->valid_tx_ant)
data->valid_tx_ant = cfg->valid_tx_ant;
if (cfg->valid_rx_ant)
data->valid_rx_ant = cfg->valid_rx_ant;
if (!data->valid_tx_ant || !data->valid_rx_ant) {
IWL_ERR_DEV(dev, "invalid antennas (0x%x, 0x%x)\n",
data->valid_tx_ant, data->valid_rx_ant);
goto err_free;
}
iwl_init_sbands(trans, cfg, data, eeprom, eeprom_size);
return data;
err_free:
kfree(data);
return NULL;
}