| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * ST SPEAr1310-miphy driver |
| * |
| * Copyright (C) 2014 ST Microelectronics |
| * Pratyush Anand <pratyush.anand@gmail.com> |
| * Mohit Kumar <mohit.kumar.dhaka@gmail.com> |
| */ |
| |
| #include <linux/bitops.h> |
| #include <linux/delay.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/phy/phy.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| |
| /* SPEAr1310 Registers */ |
| #define SPEAR1310_PCIE_SATA_CFG 0x3A4 |
| #define SPEAR1310_PCIE_SATA2_SEL_PCIE (0 << 31) |
| #define SPEAR1310_PCIE_SATA1_SEL_PCIE (0 << 30) |
| #define SPEAR1310_PCIE_SATA0_SEL_PCIE (0 << 29) |
| #define SPEAR1310_PCIE_SATA2_SEL_SATA BIT(31) |
| #define SPEAR1310_PCIE_SATA1_SEL_SATA BIT(30) |
| #define SPEAR1310_PCIE_SATA0_SEL_SATA BIT(29) |
| #define SPEAR1310_SATA2_CFG_TX_CLK_EN BIT(27) |
| #define SPEAR1310_SATA2_CFG_RX_CLK_EN BIT(26) |
| #define SPEAR1310_SATA2_CFG_POWERUP_RESET BIT(25) |
| #define SPEAR1310_SATA2_CFG_PM_CLK_EN BIT(24) |
| #define SPEAR1310_SATA1_CFG_TX_CLK_EN BIT(23) |
| #define SPEAR1310_SATA1_CFG_RX_CLK_EN BIT(22) |
| #define SPEAR1310_SATA1_CFG_POWERUP_RESET BIT(21) |
| #define SPEAR1310_SATA1_CFG_PM_CLK_EN BIT(20) |
| #define SPEAR1310_SATA0_CFG_TX_CLK_EN BIT(19) |
| #define SPEAR1310_SATA0_CFG_RX_CLK_EN BIT(18) |
| #define SPEAR1310_SATA0_CFG_POWERUP_RESET BIT(17) |
| #define SPEAR1310_SATA0_CFG_PM_CLK_EN BIT(16) |
| #define SPEAR1310_PCIE2_CFG_DEVICE_PRESENT BIT(11) |
| #define SPEAR1310_PCIE2_CFG_POWERUP_RESET BIT(10) |
| #define SPEAR1310_PCIE2_CFG_CORE_CLK_EN BIT(9) |
| #define SPEAR1310_PCIE2_CFG_AUX_CLK_EN BIT(8) |
| #define SPEAR1310_PCIE1_CFG_DEVICE_PRESENT BIT(7) |
| #define SPEAR1310_PCIE1_CFG_POWERUP_RESET BIT(6) |
| #define SPEAR1310_PCIE1_CFG_CORE_CLK_EN BIT(5) |
| #define SPEAR1310_PCIE1_CFG_AUX_CLK_EN BIT(4) |
| #define SPEAR1310_PCIE0_CFG_DEVICE_PRESENT BIT(3) |
| #define SPEAR1310_PCIE0_CFG_POWERUP_RESET BIT(2) |
| #define SPEAR1310_PCIE0_CFG_CORE_CLK_EN BIT(1) |
| #define SPEAR1310_PCIE0_CFG_AUX_CLK_EN BIT(0) |
| |
| #define SPEAR1310_PCIE_CFG_MASK(x) ((0xF << (x * 4)) | BIT((x + 29))) |
| #define SPEAR1310_SATA_CFG_MASK(x) ((0xF << (x * 4 + 16)) | \ |
| BIT((x + 29))) |
| #define SPEAR1310_PCIE_CFG_VAL(x) \ |
| (SPEAR1310_PCIE_SATA##x##_SEL_PCIE | \ |
| SPEAR1310_PCIE##x##_CFG_AUX_CLK_EN | \ |
| SPEAR1310_PCIE##x##_CFG_CORE_CLK_EN | \ |
| SPEAR1310_PCIE##x##_CFG_POWERUP_RESET | \ |
| SPEAR1310_PCIE##x##_CFG_DEVICE_PRESENT) |
| #define SPEAR1310_SATA_CFG_VAL(x) \ |
| (SPEAR1310_PCIE_SATA##x##_SEL_SATA | \ |
| SPEAR1310_SATA##x##_CFG_PM_CLK_EN | \ |
| SPEAR1310_SATA##x##_CFG_POWERUP_RESET | \ |
| SPEAR1310_SATA##x##_CFG_RX_CLK_EN | \ |
| SPEAR1310_SATA##x##_CFG_TX_CLK_EN) |
| |
| #define SPEAR1310_PCIE_MIPHY_CFG_1 0x3A8 |
| #define SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT BIT(31) |
| #define SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 BIT(28) |
| #define SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(x) (x << 16) |
| #define SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT BIT(15) |
| #define SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 BIT(12) |
| #define SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(x) (x << 0) |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_MASK (0xFFFF) |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK (0xFFFF << 16) |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA \ |
| (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ |
| SPEAR1310_MIPHY_DUAL_CLK_REF_DIV2 | \ |
| SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(60) | \ |
| SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ |
| SPEAR1310_MIPHY_SINGLE_CLK_REF_DIV2 | \ |
| SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(60)) |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \ |
| (SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(120)) |
| #define SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE \ |
| (SPEAR1310_MIPHY_DUAL_OSC_BYPASS_EXT | \ |
| SPEAR1310_MIPHY_DUAL_PLL_RATIO_TOP(25) | \ |
| SPEAR1310_MIPHY_SINGLE_OSC_BYPASS_EXT | \ |
| SPEAR1310_MIPHY_SINGLE_PLL_RATIO_TOP(25)) |
| |
| #define SPEAR1310_PCIE_MIPHY_CFG_2 0x3AC |
| |
| enum spear1310_miphy_mode { |
| SATA, |
| PCIE, |
| }; |
| |
| struct spear1310_miphy_priv { |
| /* instance id of this phy */ |
| u32 id; |
| /* phy mode: 0 for SATA 1 for PCIe */ |
| enum spear1310_miphy_mode mode; |
| /* regmap for any soc specific misc registers */ |
| struct regmap *misc; |
| /* phy struct pointer */ |
| struct phy *phy; |
| }; |
| |
| static int spear1310_miphy_pcie_init(struct spear1310_miphy_priv *priv) |
| { |
| u32 val; |
| |
| regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, |
| SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, |
| SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE); |
| |
| switch (priv->id) { |
| case 0: |
| val = SPEAR1310_PCIE_CFG_VAL(0); |
| break; |
| case 1: |
| val = SPEAR1310_PCIE_CFG_VAL(1); |
| break; |
| case 2: |
| val = SPEAR1310_PCIE_CFG_VAL(2); |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, |
| SPEAR1310_PCIE_CFG_MASK(priv->id), val); |
| |
| return 0; |
| } |
| |
| static int spear1310_miphy_pcie_exit(struct spear1310_miphy_priv *priv) |
| { |
| regmap_update_bits(priv->misc, SPEAR1310_PCIE_SATA_CFG, |
| SPEAR1310_PCIE_CFG_MASK(priv->id), 0); |
| |
| regmap_update_bits(priv->misc, SPEAR1310_PCIE_MIPHY_CFG_1, |
| SPEAR1310_PCIE_SATA_MIPHY_CFG_PCIE_MASK, 0); |
| |
| return 0; |
| } |
| |
| static int spear1310_miphy_init(struct phy *phy) |
| { |
| struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); |
| int ret = 0; |
| |
| if (priv->mode == PCIE) |
| ret = spear1310_miphy_pcie_init(priv); |
| |
| return ret; |
| } |
| |
| static int spear1310_miphy_exit(struct phy *phy) |
| { |
| struct spear1310_miphy_priv *priv = phy_get_drvdata(phy); |
| int ret = 0; |
| |
| if (priv->mode == PCIE) |
| ret = spear1310_miphy_pcie_exit(priv); |
| |
| return ret; |
| } |
| |
| static const struct of_device_id spear1310_miphy_of_match[] = { |
| { .compatible = "st,spear1310-miphy" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, spear1310_miphy_of_match); |
| |
| static const struct phy_ops spear1310_miphy_ops = { |
| .init = spear1310_miphy_init, |
| .exit = spear1310_miphy_exit, |
| .owner = THIS_MODULE, |
| }; |
| |
| static struct phy *spear1310_miphy_xlate(struct device *dev, |
| const struct of_phandle_args *args) |
| { |
| struct spear1310_miphy_priv *priv = dev_get_drvdata(dev); |
| |
| if (args->args_count < 1) { |
| dev_err(dev, "DT did not pass correct no of args\n"); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| priv->mode = args->args[0]; |
| |
| if (priv->mode != SATA && priv->mode != PCIE) { |
| dev_err(dev, "DT did not pass correct phy mode\n"); |
| return ERR_PTR(-ENODEV); |
| } |
| |
| return priv->phy; |
| } |
| |
| static int spear1310_miphy_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct spear1310_miphy_priv *priv; |
| struct phy_provider *phy_provider; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->misc = |
| syscon_regmap_lookup_by_phandle(dev->of_node, "misc"); |
| if (IS_ERR(priv->misc)) { |
| dev_err(dev, "failed to find misc regmap\n"); |
| return PTR_ERR(priv->misc); |
| } |
| |
| if (of_property_read_u32(dev->of_node, "phy-id", &priv->id)) { |
| dev_err(dev, "failed to find phy id\n"); |
| return -EINVAL; |
| } |
| |
| priv->phy = devm_phy_create(dev, NULL, &spear1310_miphy_ops); |
| if (IS_ERR(priv->phy)) { |
| dev_err(dev, "failed to create SATA PCIe PHY\n"); |
| return PTR_ERR(priv->phy); |
| } |
| |
| dev_set_drvdata(dev, priv); |
| phy_set_drvdata(priv->phy, priv); |
| |
| phy_provider = |
| devm_of_phy_provider_register(dev, spear1310_miphy_xlate); |
| if (IS_ERR(phy_provider)) { |
| dev_err(dev, "failed to register phy provider\n"); |
| return PTR_ERR(phy_provider); |
| } |
| |
| return 0; |
| } |
| |
| static struct platform_driver spear1310_miphy_driver = { |
| .probe = spear1310_miphy_probe, |
| .driver = { |
| .name = "spear1310-miphy", |
| .of_match_table = spear1310_miphy_of_match, |
| }, |
| }; |
| |
| module_platform_driver(spear1310_miphy_driver); |
| |
| MODULE_DESCRIPTION("ST SPEAR1310-MIPHY driver"); |
| MODULE_AUTHOR("Pratyush Anand <pratyush.anand@gmail.com>"); |
| MODULE_LICENSE("GPL v2"); |