| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (c) 2005, 2006 Andrea Bittau <a.bittau@cs.ucl.ac.uk> |
| * |
| * Changes to meet Linux coding standards, and DCCP infrastructure fixes. |
| * |
| * Copyright (c) 2006 Arnaldo Carvalho de Melo <acme@conectiva.com.br> |
| */ |
| |
| /* |
| * This implementation should follow RFC 4341 |
| */ |
| #include <linux/slab.h> |
| #include "../feat.h" |
| #include "ccid2.h" |
| |
| |
| #ifdef CONFIG_IP_DCCP_CCID2_DEBUG |
| static bool ccid2_debug; |
| #define ccid2_pr_debug(format, a...) DCCP_PR_DEBUG(ccid2_debug, format, ##a) |
| #else |
| #define ccid2_pr_debug(format, a...) |
| #endif |
| |
| static int ccid2_hc_tx_alloc_seq(struct ccid2_hc_tx_sock *hc) |
| { |
| struct ccid2_seq *seqp; |
| int i; |
| |
| /* check if we have space to preserve the pointer to the buffer */ |
| if (hc->tx_seqbufc >= (sizeof(hc->tx_seqbuf) / |
| sizeof(struct ccid2_seq *))) |
| return -ENOMEM; |
| |
| /* allocate buffer and initialize linked list */ |
| seqp = kmalloc_array(CCID2_SEQBUF_LEN, sizeof(struct ccid2_seq), |
| gfp_any()); |
| if (seqp == NULL) |
| return -ENOMEM; |
| |
| for (i = 0; i < (CCID2_SEQBUF_LEN - 1); i++) { |
| seqp[i].ccid2s_next = &seqp[i + 1]; |
| seqp[i + 1].ccid2s_prev = &seqp[i]; |
| } |
| seqp[CCID2_SEQBUF_LEN - 1].ccid2s_next = seqp; |
| seqp->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1]; |
| |
| /* This is the first allocation. Initiate the head and tail. */ |
| if (hc->tx_seqbufc == 0) |
| hc->tx_seqh = hc->tx_seqt = seqp; |
| else { |
| /* link the existing list with the one we just created */ |
| hc->tx_seqh->ccid2s_next = seqp; |
| seqp->ccid2s_prev = hc->tx_seqh; |
| |
| hc->tx_seqt->ccid2s_prev = &seqp[CCID2_SEQBUF_LEN - 1]; |
| seqp[CCID2_SEQBUF_LEN - 1].ccid2s_next = hc->tx_seqt; |
| } |
| |
| /* store the original pointer to the buffer so we can free it */ |
| hc->tx_seqbuf[hc->tx_seqbufc] = seqp; |
| hc->tx_seqbufc++; |
| |
| return 0; |
| } |
| |
| static int ccid2_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) |
| { |
| if (ccid2_cwnd_network_limited(ccid2_hc_tx_sk(sk))) |
| return CCID_PACKET_WILL_DEQUEUE_LATER; |
| return CCID_PACKET_SEND_AT_ONCE; |
| } |
| |
| static void ccid2_change_l_ack_ratio(struct sock *sk, u32 val) |
| { |
| u32 max_ratio = DIV_ROUND_UP(ccid2_hc_tx_sk(sk)->tx_cwnd, 2); |
| |
| /* |
| * Ensure that Ack Ratio does not exceed ceil(cwnd/2), which is (2) from |
| * RFC 4341, 6.1.2. We ignore the statement that Ack Ratio 2 is always |
| * acceptable since this causes starvation/deadlock whenever cwnd < 2. |
| * The same problem arises when Ack Ratio is 0 (ie. Ack Ratio disabled). |
| */ |
| if (val == 0 || val > max_ratio) { |
| DCCP_WARN("Limiting Ack Ratio (%u) to %u\n", val, max_ratio); |
| val = max_ratio; |
| } |
| dccp_feat_signal_nn_change(sk, DCCPF_ACK_RATIO, |
| min_t(u32, val, DCCPF_ACK_RATIO_MAX)); |
| } |
| |
| static void ccid2_check_l_ack_ratio(struct sock *sk) |
| { |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| |
| /* |
| * After a loss, idle period, application limited period, or RTO we |
| * need to check that the ack ratio is still less than the congestion |
| * window. Otherwise, we will send an entire congestion window of |
| * packets and got no response because we haven't sent ack ratio |
| * packets yet. |
| * If the ack ratio does need to be reduced, we reduce it to half of |
| * the congestion window (or 1 if that's zero) instead of to the |
| * congestion window. This prevents problems if one ack is lost. |
| */ |
| if (dccp_feat_nn_get(sk, DCCPF_ACK_RATIO) > hc->tx_cwnd) |
| ccid2_change_l_ack_ratio(sk, hc->tx_cwnd/2 ? : 1U); |
| } |
| |
| static void ccid2_change_l_seq_window(struct sock *sk, u64 val) |
| { |
| dccp_feat_signal_nn_change(sk, DCCPF_SEQUENCE_WINDOW, |
| clamp_val(val, DCCPF_SEQ_WMIN, |
| DCCPF_SEQ_WMAX)); |
| } |
| |
| static void dccp_tasklet_schedule(struct sock *sk) |
| { |
| struct tasklet_struct *t = &dccp_sk(sk)->dccps_xmitlet; |
| |
| if (!test_and_set_bit(TASKLET_STATE_SCHED, &t->state)) { |
| sock_hold(sk); |
| __tasklet_schedule(t); |
| } |
| } |
| |
| static void ccid2_hc_tx_rto_expire(struct timer_list *t) |
| { |
| struct ccid2_hc_tx_sock *hc = from_timer(hc, t, tx_rtotimer); |
| struct sock *sk = hc->sk; |
| const bool sender_was_blocked = ccid2_cwnd_network_limited(hc); |
| |
| bh_lock_sock(sk); |
| if (sock_owned_by_user(sk)) { |
| sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + HZ / 5); |
| goto out; |
| } |
| |
| ccid2_pr_debug("RTO_EXPIRE\n"); |
| |
| if (sk->sk_state == DCCP_CLOSED) |
| goto out; |
| |
| /* back-off timer */ |
| hc->tx_rto <<= 1; |
| if (hc->tx_rto > DCCP_RTO_MAX) |
| hc->tx_rto = DCCP_RTO_MAX; |
| |
| /* adjust pipe, cwnd etc */ |
| hc->tx_ssthresh = hc->tx_cwnd / 2; |
| if (hc->tx_ssthresh < 2) |
| hc->tx_ssthresh = 2; |
| hc->tx_cwnd = 1; |
| hc->tx_pipe = 0; |
| |
| /* clear state about stuff we sent */ |
| hc->tx_seqt = hc->tx_seqh; |
| hc->tx_packets_acked = 0; |
| |
| /* clear ack ratio state. */ |
| hc->tx_rpseq = 0; |
| hc->tx_rpdupack = -1; |
| ccid2_change_l_ack_ratio(sk, 1); |
| |
| /* if we were blocked before, we may now send cwnd=1 packet */ |
| if (sender_was_blocked) |
| dccp_tasklet_schedule(sk); |
| /* restart backed-off timer */ |
| sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + hc->tx_rto); |
| out: |
| bh_unlock_sock(sk); |
| sock_put(sk); |
| } |
| |
| /* |
| * Congestion window validation (RFC 2861). |
| */ |
| static bool ccid2_do_cwv = true; |
| module_param(ccid2_do_cwv, bool, 0644); |
| MODULE_PARM_DESC(ccid2_do_cwv, "Perform RFC2861 Congestion Window Validation"); |
| |
| /** |
| * ccid2_update_used_window - Track how much of cwnd is actually used |
| * @hc: socket to update window |
| * @new_wnd: new window values to add into the filter |
| * |
| * This is done in addition to CWV. The sender needs to have an idea of how many |
| * packets may be in flight, to set the local Sequence Window value accordingly |
| * (RFC 4340, 7.5.2). The CWV mechanism is exploited to keep track of the |
| * maximum-used window. We use an EWMA low-pass filter to filter out noise. |
| */ |
| static void ccid2_update_used_window(struct ccid2_hc_tx_sock *hc, u32 new_wnd) |
| { |
| hc->tx_expected_wnd = (3 * hc->tx_expected_wnd + new_wnd) / 4; |
| } |
| |
| /* This borrows the code of tcp_cwnd_application_limited() */ |
| static void ccid2_cwnd_application_limited(struct sock *sk, const u32 now) |
| { |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| /* don't reduce cwnd below the initial window (IW) */ |
| u32 init_win = rfc3390_bytes_to_packets(dccp_sk(sk)->dccps_mss_cache), |
| win_used = max(hc->tx_cwnd_used, init_win); |
| |
| if (win_used < hc->tx_cwnd) { |
| hc->tx_ssthresh = max(hc->tx_ssthresh, |
| (hc->tx_cwnd >> 1) + (hc->tx_cwnd >> 2)); |
| hc->tx_cwnd = (hc->tx_cwnd + win_used) >> 1; |
| } |
| hc->tx_cwnd_used = 0; |
| hc->tx_cwnd_stamp = now; |
| |
| ccid2_check_l_ack_ratio(sk); |
| } |
| |
| /* This borrows the code of tcp_cwnd_restart() */ |
| static void ccid2_cwnd_restart(struct sock *sk, const u32 now) |
| { |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| u32 cwnd = hc->tx_cwnd, restart_cwnd, |
| iwnd = rfc3390_bytes_to_packets(dccp_sk(sk)->dccps_mss_cache); |
| s32 delta = now - hc->tx_lsndtime; |
| |
| hc->tx_ssthresh = max(hc->tx_ssthresh, (cwnd >> 1) + (cwnd >> 2)); |
| |
| /* don't reduce cwnd below the initial window (IW) */ |
| restart_cwnd = min(cwnd, iwnd); |
| |
| while ((delta -= hc->tx_rto) >= 0 && cwnd > restart_cwnd) |
| cwnd >>= 1; |
| hc->tx_cwnd = max(cwnd, restart_cwnd); |
| hc->tx_cwnd_stamp = now; |
| hc->tx_cwnd_used = 0; |
| |
| ccid2_check_l_ack_ratio(sk); |
| } |
| |
| static void ccid2_hc_tx_packet_sent(struct sock *sk, unsigned int len) |
| { |
| struct dccp_sock *dp = dccp_sk(sk); |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| const u32 now = ccid2_jiffies32; |
| struct ccid2_seq *next; |
| |
| /* slow-start after idle periods (RFC 2581, RFC 2861) */ |
| if (ccid2_do_cwv && !hc->tx_pipe && |
| (s32)(now - hc->tx_lsndtime) >= hc->tx_rto) |
| ccid2_cwnd_restart(sk, now); |
| |
| hc->tx_lsndtime = now; |
| hc->tx_pipe += 1; |
| |
| /* see whether cwnd was fully used (RFC 2861), update expected window */ |
| if (ccid2_cwnd_network_limited(hc)) { |
| ccid2_update_used_window(hc, hc->tx_cwnd); |
| hc->tx_cwnd_used = 0; |
| hc->tx_cwnd_stamp = now; |
| } else { |
| if (hc->tx_pipe > hc->tx_cwnd_used) |
| hc->tx_cwnd_used = hc->tx_pipe; |
| |
| ccid2_update_used_window(hc, hc->tx_cwnd_used); |
| |
| if (ccid2_do_cwv && (s32)(now - hc->tx_cwnd_stamp) >= hc->tx_rto) |
| ccid2_cwnd_application_limited(sk, now); |
| } |
| |
| hc->tx_seqh->ccid2s_seq = dp->dccps_gss; |
| hc->tx_seqh->ccid2s_acked = 0; |
| hc->tx_seqh->ccid2s_sent = now; |
| |
| next = hc->tx_seqh->ccid2s_next; |
| /* check if we need to alloc more space */ |
| if (next == hc->tx_seqt) { |
| if (ccid2_hc_tx_alloc_seq(hc)) { |
| DCCP_CRIT("packet history - out of memory!"); |
| /* FIXME: find a more graceful way to bail out */ |
| return; |
| } |
| next = hc->tx_seqh->ccid2s_next; |
| BUG_ON(next == hc->tx_seqt); |
| } |
| hc->tx_seqh = next; |
| |
| ccid2_pr_debug("cwnd=%d pipe=%d\n", hc->tx_cwnd, hc->tx_pipe); |
| |
| /* |
| * FIXME: The code below is broken and the variables have been removed |
| * from the socket struct. The `ackloss' variable was always set to 0, |
| * and with arsent there are several problems: |
| * (i) it doesn't just count the number of Acks, but all sent packets; |
| * (ii) it is expressed in # of packets, not # of windows, so the |
| * comparison below uses the wrong formula: Appendix A of RFC 4341 |
| * comes up with the number K = cwnd / (R^2 - R) of consecutive windows |
| * of data with no lost or marked Ack packets. If arsent were the # of |
| * consecutive Acks received without loss, then Ack Ratio needs to be |
| * decreased by 1 when |
| * arsent >= K * cwnd / R = cwnd^2 / (R^3 - R^2) |
| * where cwnd / R is the number of Acks received per window of data |
| * (cf. RFC 4341, App. A). The problems are that |
| * - arsent counts other packets as well; |
| * - the comparison uses a formula different from RFC 4341; |
| * - computing a cubic/quadratic equation each time is too complicated. |
| * Hence a different algorithm is needed. |
| */ |
| #if 0 |
| /* Ack Ratio. Need to maintain a concept of how many windows we sent */ |
| hc->tx_arsent++; |
| /* We had an ack loss in this window... */ |
| if (hc->tx_ackloss) { |
| if (hc->tx_arsent >= hc->tx_cwnd) { |
| hc->tx_arsent = 0; |
| hc->tx_ackloss = 0; |
| } |
| } else { |
| /* No acks lost up to now... */ |
| /* decrease ack ratio if enough packets were sent */ |
| if (dp->dccps_l_ack_ratio > 1) { |
| /* XXX don't calculate denominator each time */ |
| int denom = dp->dccps_l_ack_ratio * dp->dccps_l_ack_ratio - |
| dp->dccps_l_ack_ratio; |
| |
| denom = hc->tx_cwnd * hc->tx_cwnd / denom; |
| |
| if (hc->tx_arsent >= denom) { |
| ccid2_change_l_ack_ratio(sk, dp->dccps_l_ack_ratio - 1); |
| hc->tx_arsent = 0; |
| } |
| } else { |
| /* we can't increase ack ratio further [1] */ |
| hc->tx_arsent = 0; /* or maybe set it to cwnd*/ |
| } |
| } |
| #endif |
| |
| sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + hc->tx_rto); |
| |
| #ifdef CONFIG_IP_DCCP_CCID2_DEBUG |
| do { |
| struct ccid2_seq *seqp = hc->tx_seqt; |
| |
| while (seqp != hc->tx_seqh) { |
| ccid2_pr_debug("out seq=%llu acked=%d time=%u\n", |
| (unsigned long long)seqp->ccid2s_seq, |
| seqp->ccid2s_acked, seqp->ccid2s_sent); |
| seqp = seqp->ccid2s_next; |
| } |
| } while (0); |
| ccid2_pr_debug("=========\n"); |
| #endif |
| } |
| |
| /** |
| * ccid2_rtt_estimator - Sample RTT and compute RTO using RFC2988 algorithm |
| * @sk: socket to perform estimator on |
| * @mrtt: measured RTT |
| * |
| * This code is almost identical with TCP's tcp_rtt_estimator(), since |
| * - it has a higher sampling frequency (recommended by RFC 1323), |
| * - the RTO does not collapse into RTT due to RTTVAR going towards zero, |
| * - it is simple (cf. more complex proposals such as Eifel timer or research |
| * which suggests that the gain should be set according to window size), |
| * - in tests it was found to work well with CCID2 [gerrit]. |
| */ |
| static void ccid2_rtt_estimator(struct sock *sk, const long mrtt) |
| { |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| long m = mrtt ? : 1; |
| |
| if (hc->tx_srtt == 0) { |
| /* First measurement m */ |
| hc->tx_srtt = m << 3; |
| hc->tx_mdev = m << 1; |
| |
| hc->tx_mdev_max = max(hc->tx_mdev, tcp_rto_min(sk)); |
| hc->tx_rttvar = hc->tx_mdev_max; |
| |
| hc->tx_rtt_seq = dccp_sk(sk)->dccps_gss; |
| } else { |
| /* Update scaled SRTT as SRTT += 1/8 * (m - SRTT) */ |
| m -= (hc->tx_srtt >> 3); |
| hc->tx_srtt += m; |
| |
| /* Similarly, update scaled mdev with regard to |m| */ |
| if (m < 0) { |
| m = -m; |
| m -= (hc->tx_mdev >> 2); |
| /* |
| * This neutralises RTO increase when RTT < SRTT - mdev |
| * (see P. Sarolahti, A. Kuznetsov,"Congestion Control |
| * in Linux TCP", USENIX 2002, pp. 49-62). |
| */ |
| if (m > 0) |
| m >>= 3; |
| } else { |
| m -= (hc->tx_mdev >> 2); |
| } |
| hc->tx_mdev += m; |
| |
| if (hc->tx_mdev > hc->tx_mdev_max) { |
| hc->tx_mdev_max = hc->tx_mdev; |
| if (hc->tx_mdev_max > hc->tx_rttvar) |
| hc->tx_rttvar = hc->tx_mdev_max; |
| } |
| |
| /* |
| * Decay RTTVAR at most once per flight, exploiting that |
| * 1) pipe <= cwnd <= Sequence_Window = W (RFC 4340, 7.5.2) |
| * 2) AWL = GSS-W+1 <= GAR <= GSS (RFC 4340, 7.5.1) |
| * GAR is a useful bound for FlightSize = pipe. |
| * AWL is probably too low here, as it over-estimates pipe. |
| */ |
| if (after48(dccp_sk(sk)->dccps_gar, hc->tx_rtt_seq)) { |
| if (hc->tx_mdev_max < hc->tx_rttvar) |
| hc->tx_rttvar -= (hc->tx_rttvar - |
| hc->tx_mdev_max) >> 2; |
| hc->tx_rtt_seq = dccp_sk(sk)->dccps_gss; |
| hc->tx_mdev_max = tcp_rto_min(sk); |
| } |
| } |
| |
| /* |
| * Set RTO from SRTT and RTTVAR |
| * As in TCP, 4 * RTTVAR >= TCP_RTO_MIN, giving a minimum RTO of 200 ms. |
| * This agrees with RFC 4341, 5: |
| * "Because DCCP does not retransmit data, DCCP does not require |
| * TCP's recommended minimum timeout of one second". |
| */ |
| hc->tx_rto = (hc->tx_srtt >> 3) + hc->tx_rttvar; |
| |
| if (hc->tx_rto > DCCP_RTO_MAX) |
| hc->tx_rto = DCCP_RTO_MAX; |
| } |
| |
| static void ccid2_new_ack(struct sock *sk, struct ccid2_seq *seqp, |
| unsigned int *maxincr) |
| { |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| struct dccp_sock *dp = dccp_sk(sk); |
| int r_seq_used = hc->tx_cwnd / dp->dccps_l_ack_ratio; |
| |
| if (hc->tx_cwnd < dp->dccps_l_seq_win && |
| r_seq_used < dp->dccps_r_seq_win) { |
| if (hc->tx_cwnd < hc->tx_ssthresh) { |
| if (*maxincr > 0 && ++hc->tx_packets_acked >= 2) { |
| hc->tx_cwnd += 1; |
| *maxincr -= 1; |
| hc->tx_packets_acked = 0; |
| } |
| } else if (++hc->tx_packets_acked >= hc->tx_cwnd) { |
| hc->tx_cwnd += 1; |
| hc->tx_packets_acked = 0; |
| } |
| } |
| |
| /* |
| * Adjust the local sequence window and the ack ratio to allow about |
| * 5 times the number of packets in the network (RFC 4340 7.5.2) |
| */ |
| if (r_seq_used * CCID2_WIN_CHANGE_FACTOR >= dp->dccps_r_seq_win) |
| ccid2_change_l_ack_ratio(sk, dp->dccps_l_ack_ratio * 2); |
| else if (r_seq_used * CCID2_WIN_CHANGE_FACTOR < dp->dccps_r_seq_win/2) |
| ccid2_change_l_ack_ratio(sk, dp->dccps_l_ack_ratio / 2 ? : 1U); |
| |
| if (hc->tx_cwnd * CCID2_WIN_CHANGE_FACTOR >= dp->dccps_l_seq_win) |
| ccid2_change_l_seq_window(sk, dp->dccps_l_seq_win * 2); |
| else if (hc->tx_cwnd * CCID2_WIN_CHANGE_FACTOR < dp->dccps_l_seq_win/2) |
| ccid2_change_l_seq_window(sk, dp->dccps_l_seq_win / 2); |
| |
| /* |
| * FIXME: RTT is sampled several times per acknowledgment (for each |
| * entry in the Ack Vector), instead of once per Ack (as in TCP SACK). |
| * This causes the RTT to be over-estimated, since the older entries |
| * in the Ack Vector have earlier sending times. |
| * The cleanest solution is to not use the ccid2s_sent field at all |
| * and instead use DCCP timestamps: requires changes in other places. |
| */ |
| ccid2_rtt_estimator(sk, ccid2_jiffies32 - seqp->ccid2s_sent); |
| } |
| |
| static void ccid2_congestion_event(struct sock *sk, struct ccid2_seq *seqp) |
| { |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| |
| if ((s32)(seqp->ccid2s_sent - hc->tx_last_cong) < 0) { |
| ccid2_pr_debug("Multiple losses in an RTT---treating as one\n"); |
| return; |
| } |
| |
| hc->tx_last_cong = ccid2_jiffies32; |
| |
| hc->tx_cwnd = hc->tx_cwnd / 2 ? : 1U; |
| hc->tx_ssthresh = max(hc->tx_cwnd, 2U); |
| |
| ccid2_check_l_ack_ratio(sk); |
| } |
| |
| static int ccid2_hc_tx_parse_options(struct sock *sk, u8 packet_type, |
| u8 option, u8 *optval, u8 optlen) |
| { |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| |
| switch (option) { |
| case DCCPO_ACK_VECTOR_0: |
| case DCCPO_ACK_VECTOR_1: |
| return dccp_ackvec_parsed_add(&hc->tx_av_chunks, optval, optlen, |
| option - DCCPO_ACK_VECTOR_0); |
| } |
| return 0; |
| } |
| |
| static void ccid2_hc_tx_packet_recv(struct sock *sk, struct sk_buff *skb) |
| { |
| struct dccp_sock *dp = dccp_sk(sk); |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| const bool sender_was_blocked = ccid2_cwnd_network_limited(hc); |
| struct dccp_ackvec_parsed *avp; |
| u64 ackno, seqno; |
| struct ccid2_seq *seqp; |
| int done = 0; |
| unsigned int maxincr = 0; |
| |
| /* check reverse path congestion */ |
| seqno = DCCP_SKB_CB(skb)->dccpd_seq; |
| |
| /* XXX this whole "algorithm" is broken. Need to fix it to keep track |
| * of the seqnos of the dupacks so that rpseq and rpdupack are correct |
| * -sorbo. |
| */ |
| /* need to bootstrap */ |
| if (hc->tx_rpdupack == -1) { |
| hc->tx_rpdupack = 0; |
| hc->tx_rpseq = seqno; |
| } else { |
| /* check if packet is consecutive */ |
| if (dccp_delta_seqno(hc->tx_rpseq, seqno) == 1) |
| hc->tx_rpseq = seqno; |
| /* it's a later packet */ |
| else if (after48(seqno, hc->tx_rpseq)) { |
| hc->tx_rpdupack++; |
| |
| /* check if we got enough dupacks */ |
| if (hc->tx_rpdupack >= NUMDUPACK) { |
| hc->tx_rpdupack = -1; /* XXX lame */ |
| hc->tx_rpseq = 0; |
| #ifdef __CCID2_COPES_GRACEFULLY_WITH_ACK_CONGESTION_CONTROL__ |
| /* |
| * FIXME: Ack Congestion Control is broken; in |
| * the current state instabilities occurred with |
| * Ack Ratios greater than 1; causing hang-ups |
| * and long RTO timeouts. This needs to be fixed |
| * before opening up dynamic changes. -- gerrit |
| */ |
| ccid2_change_l_ack_ratio(sk, 2 * dp->dccps_l_ack_ratio); |
| #endif |
| } |
| } |
| } |
| |
| /* check forward path congestion */ |
| if (dccp_packet_without_ack(skb)) |
| return; |
| |
| /* still didn't send out new data packets */ |
| if (hc->tx_seqh == hc->tx_seqt) |
| goto done; |
| |
| ackno = DCCP_SKB_CB(skb)->dccpd_ack_seq; |
| if (after48(ackno, hc->tx_high_ack)) |
| hc->tx_high_ack = ackno; |
| |
| seqp = hc->tx_seqt; |
| while (before48(seqp->ccid2s_seq, ackno)) { |
| seqp = seqp->ccid2s_next; |
| if (seqp == hc->tx_seqh) { |
| seqp = hc->tx_seqh->ccid2s_prev; |
| break; |
| } |
| } |
| |
| /* |
| * In slow-start, cwnd can increase up to a maximum of Ack Ratio/2 |
| * packets per acknowledgement. Rounding up avoids that cwnd is not |
| * advanced when Ack Ratio is 1 and gives a slight edge otherwise. |
| */ |
| if (hc->tx_cwnd < hc->tx_ssthresh) |
| maxincr = DIV_ROUND_UP(dp->dccps_l_ack_ratio, 2); |
| |
| /* go through all ack vectors */ |
| list_for_each_entry(avp, &hc->tx_av_chunks, node) { |
| /* go through this ack vector */ |
| for (; avp->len--; avp->vec++) { |
| u64 ackno_end_rl = SUB48(ackno, |
| dccp_ackvec_runlen(avp->vec)); |
| |
| ccid2_pr_debug("ackvec %llu |%u,%u|\n", |
| (unsigned long long)ackno, |
| dccp_ackvec_state(avp->vec) >> 6, |
| dccp_ackvec_runlen(avp->vec)); |
| /* if the seqno we are analyzing is larger than the |
| * current ackno, then move towards the tail of our |
| * seqnos. |
| */ |
| while (after48(seqp->ccid2s_seq, ackno)) { |
| if (seqp == hc->tx_seqt) { |
| done = 1; |
| break; |
| } |
| seqp = seqp->ccid2s_prev; |
| } |
| if (done) |
| break; |
| |
| /* check all seqnos in the range of the vector |
| * run length |
| */ |
| while (between48(seqp->ccid2s_seq,ackno_end_rl,ackno)) { |
| const u8 state = dccp_ackvec_state(avp->vec); |
| |
| /* new packet received or marked */ |
| if (state != DCCPAV_NOT_RECEIVED && |
| !seqp->ccid2s_acked) { |
| if (state == DCCPAV_ECN_MARKED) |
| ccid2_congestion_event(sk, |
| seqp); |
| else |
| ccid2_new_ack(sk, seqp, |
| &maxincr); |
| |
| seqp->ccid2s_acked = 1; |
| ccid2_pr_debug("Got ack for %llu\n", |
| (unsigned long long)seqp->ccid2s_seq); |
| hc->tx_pipe--; |
| } |
| if (seqp == hc->tx_seqt) { |
| done = 1; |
| break; |
| } |
| seqp = seqp->ccid2s_prev; |
| } |
| if (done) |
| break; |
| |
| ackno = SUB48(ackno_end_rl, 1); |
| } |
| if (done) |
| break; |
| } |
| |
| /* The state about what is acked should be correct now |
| * Check for NUMDUPACK |
| */ |
| seqp = hc->tx_seqt; |
| while (before48(seqp->ccid2s_seq, hc->tx_high_ack)) { |
| seqp = seqp->ccid2s_next; |
| if (seqp == hc->tx_seqh) { |
| seqp = hc->tx_seqh->ccid2s_prev; |
| break; |
| } |
| } |
| done = 0; |
| while (1) { |
| if (seqp->ccid2s_acked) { |
| done++; |
| if (done == NUMDUPACK) |
| break; |
| } |
| if (seqp == hc->tx_seqt) |
| break; |
| seqp = seqp->ccid2s_prev; |
| } |
| |
| /* If there are at least 3 acknowledgements, anything unacknowledged |
| * below the last sequence number is considered lost |
| */ |
| if (done == NUMDUPACK) { |
| struct ccid2_seq *last_acked = seqp; |
| |
| /* check for lost packets */ |
| while (1) { |
| if (!seqp->ccid2s_acked) { |
| ccid2_pr_debug("Packet lost: %llu\n", |
| (unsigned long long)seqp->ccid2s_seq); |
| /* XXX need to traverse from tail -> head in |
| * order to detect multiple congestion events in |
| * one ack vector. |
| */ |
| ccid2_congestion_event(sk, seqp); |
| hc->tx_pipe--; |
| } |
| if (seqp == hc->tx_seqt) |
| break; |
| seqp = seqp->ccid2s_prev; |
| } |
| |
| hc->tx_seqt = last_acked; |
| } |
| |
| /* trim acked packets in tail */ |
| while (hc->tx_seqt != hc->tx_seqh) { |
| if (!hc->tx_seqt->ccid2s_acked) |
| break; |
| |
| hc->tx_seqt = hc->tx_seqt->ccid2s_next; |
| } |
| |
| /* restart RTO timer if not all outstanding data has been acked */ |
| if (hc->tx_pipe == 0) |
| sk_stop_timer(sk, &hc->tx_rtotimer); |
| else |
| sk_reset_timer(sk, &hc->tx_rtotimer, jiffies + hc->tx_rto); |
| done: |
| /* check if incoming Acks allow pending packets to be sent */ |
| if (sender_was_blocked && !ccid2_cwnd_network_limited(hc)) |
| dccp_tasklet_schedule(sk); |
| dccp_ackvec_parsed_cleanup(&hc->tx_av_chunks); |
| } |
| |
| static int ccid2_hc_tx_init(struct ccid *ccid, struct sock *sk) |
| { |
| struct ccid2_hc_tx_sock *hc = ccid_priv(ccid); |
| struct dccp_sock *dp = dccp_sk(sk); |
| u32 max_ratio; |
| |
| /* RFC 4341, 5: initialise ssthresh to arbitrarily high (max) value */ |
| hc->tx_ssthresh = ~0U; |
| |
| /* Use larger initial windows (RFC 4341, section 5). */ |
| hc->tx_cwnd = rfc3390_bytes_to_packets(dp->dccps_mss_cache); |
| hc->tx_expected_wnd = hc->tx_cwnd; |
| |
| /* Make sure that Ack Ratio is enabled and within bounds. */ |
| max_ratio = DIV_ROUND_UP(hc->tx_cwnd, 2); |
| if (dp->dccps_l_ack_ratio == 0 || dp->dccps_l_ack_ratio > max_ratio) |
| dp->dccps_l_ack_ratio = max_ratio; |
| |
| /* XXX init ~ to window size... */ |
| if (ccid2_hc_tx_alloc_seq(hc)) |
| return -ENOMEM; |
| |
| hc->tx_rto = DCCP_TIMEOUT_INIT; |
| hc->tx_rpdupack = -1; |
| hc->tx_last_cong = hc->tx_lsndtime = hc->tx_cwnd_stamp = ccid2_jiffies32; |
| hc->tx_cwnd_used = 0; |
| hc->sk = sk; |
| timer_setup(&hc->tx_rtotimer, ccid2_hc_tx_rto_expire, 0); |
| INIT_LIST_HEAD(&hc->tx_av_chunks); |
| return 0; |
| } |
| |
| static void ccid2_hc_tx_exit(struct sock *sk) |
| { |
| struct ccid2_hc_tx_sock *hc = ccid2_hc_tx_sk(sk); |
| int i; |
| |
| sk_stop_timer(sk, &hc->tx_rtotimer); |
| |
| for (i = 0; i < hc->tx_seqbufc; i++) |
| kfree(hc->tx_seqbuf[i]); |
| hc->tx_seqbufc = 0; |
| dccp_ackvec_parsed_cleanup(&hc->tx_av_chunks); |
| } |
| |
| static void ccid2_hc_rx_packet_recv(struct sock *sk, struct sk_buff *skb) |
| { |
| struct ccid2_hc_rx_sock *hc = ccid2_hc_rx_sk(sk); |
| |
| if (!dccp_data_packet(skb)) |
| return; |
| |
| if (++hc->rx_num_data_pkts >= dccp_sk(sk)->dccps_r_ack_ratio) { |
| dccp_send_ack(sk); |
| hc->rx_num_data_pkts = 0; |
| } |
| } |
| |
| struct ccid_operations ccid2_ops = { |
| .ccid_id = DCCPC_CCID2, |
| .ccid_name = "TCP-like", |
| .ccid_hc_tx_obj_size = sizeof(struct ccid2_hc_tx_sock), |
| .ccid_hc_tx_init = ccid2_hc_tx_init, |
| .ccid_hc_tx_exit = ccid2_hc_tx_exit, |
| .ccid_hc_tx_send_packet = ccid2_hc_tx_send_packet, |
| .ccid_hc_tx_packet_sent = ccid2_hc_tx_packet_sent, |
| .ccid_hc_tx_parse_options = ccid2_hc_tx_parse_options, |
| .ccid_hc_tx_packet_recv = ccid2_hc_tx_packet_recv, |
| .ccid_hc_rx_obj_size = sizeof(struct ccid2_hc_rx_sock), |
| .ccid_hc_rx_packet_recv = ccid2_hc_rx_packet_recv, |
| }; |
| |
| #ifdef CONFIG_IP_DCCP_CCID2_DEBUG |
| module_param(ccid2_debug, bool, 0644); |
| MODULE_PARM_DESC(ccid2_debug, "Enable CCID-2 debug messages"); |
| #endif |