| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2010 DENX Software Engineering |
| * |
| * Anatolij Gustschin, <agust@denx.de> |
| * |
| * PDM360NG board setup |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/io.h> |
| #include <linux/of_address.h> |
| #include <linux/of_fdt.h> |
| #include <linux/of_platform.h> |
| |
| #include <asm/machdep.h> |
| #include <asm/ipic.h> |
| |
| #include "mpc512x.h" |
| |
| #if defined(CONFIG_TOUCHSCREEN_ADS7846) || \ |
| defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE) |
| #include <linux/interrupt.h> |
| #include <linux/spi/ads7846.h> |
| #include <linux/spi/spi.h> |
| #include <linux/notifier.h> |
| |
| static void *pdm360ng_gpio_base; |
| |
| static int pdm360ng_get_pendown_state(void) |
| { |
| u32 reg; |
| |
| reg = in_be32(pdm360ng_gpio_base + 0xc); |
| if (reg & 0x40) |
| setbits32(pdm360ng_gpio_base + 0xc, 0x40); |
| |
| reg = in_be32(pdm360ng_gpio_base + 0x8); |
| |
| /* return 1 if pen is down */ |
| return (reg & 0x40) == 0; |
| } |
| |
| static struct ads7846_platform_data pdm360ng_ads7846_pdata = { |
| .model = 7845, |
| .get_pendown_state = pdm360ng_get_pendown_state, |
| .irq_flags = IRQF_TRIGGER_LOW, |
| }; |
| |
| static int __init pdm360ng_penirq_init(void) |
| { |
| struct device_node *np; |
| |
| np = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-gpio"); |
| if (!np) { |
| pr_err("%s: Can't find 'mpc5121-gpio' node\n", __func__); |
| return -ENODEV; |
| } |
| |
| pdm360ng_gpio_base = of_iomap(np, 0); |
| of_node_put(np); |
| if (!pdm360ng_gpio_base) { |
| pr_err("%s: Can't map gpio regs.\n", __func__); |
| return -ENODEV; |
| } |
| out_be32(pdm360ng_gpio_base + 0xc, 0xffffffff); |
| setbits32(pdm360ng_gpio_base + 0x18, 0x2000); |
| setbits32(pdm360ng_gpio_base + 0x10, 0x40); |
| |
| return 0; |
| } |
| |
| static int pdm360ng_touchscreen_notifier_call(struct notifier_block *nb, |
| unsigned long event, void *__dev) |
| { |
| struct device *dev = __dev; |
| |
| if ((event == BUS_NOTIFY_ADD_DEVICE) && |
| of_device_is_compatible(dev->of_node, "ti,ads7846")) { |
| dev->platform_data = &pdm360ng_ads7846_pdata; |
| return NOTIFY_OK; |
| } |
| return NOTIFY_DONE; |
| } |
| |
| static struct notifier_block pdm360ng_touchscreen_nb = { |
| .notifier_call = pdm360ng_touchscreen_notifier_call, |
| }; |
| |
| static void __init pdm360ng_touchscreen_init(void) |
| { |
| if (pdm360ng_penirq_init()) |
| return; |
| |
| bus_register_notifier(&spi_bus_type, &pdm360ng_touchscreen_nb); |
| } |
| #else |
| static inline void __init pdm360ng_touchscreen_init(void) |
| { |
| } |
| #endif /* CONFIG_TOUCHSCREEN_ADS7846 */ |
| |
| void __init pdm360ng_init(void) |
| { |
| mpc512x_init(); |
| pdm360ng_touchscreen_init(); |
| } |
| |
| static int __init pdm360ng_probe(void) |
| { |
| if (!of_machine_is_compatible("ifm,pdm360ng")) |
| return 0; |
| |
| mpc512x_init_early(); |
| |
| return 1; |
| } |
| |
| define_machine(pdm360ng) { |
| .name = "PDM360NG", |
| .probe = pdm360ng_probe, |
| .setup_arch = mpc512x_setup_arch, |
| .init = pdm360ng_init, |
| .init_IRQ = mpc512x_init_IRQ, |
| .get_irq = ipic_get_irq, |
| .calibrate_decr = generic_calibrate_decr, |
| .restart = mpc512x_restart, |
| }; |