| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Driver for Delta DPS920AB PSU |
| * |
| * Copyright (C) 2021 Delta Networks, Inc. |
| * Copyright (C) 2021 Sartura Ltd. |
| */ |
| |
| #include <linux/debugfs.h> |
| #include <linux/i2c.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include "pmbus.h" |
| |
| struct dps920ab_data { |
| char *mfr_model; |
| char *mfr_id; |
| }; |
| |
| static int dps920ab_read_word_data(struct i2c_client *client, int page, int phase, int reg) |
| { |
| /* |
| * This masks commands which are not supported. |
| * PSU advertises that all features are supported, |
| * in reality that unfortunately is not true. |
| * So enable only those that the datasheet confirms. |
| */ |
| switch (reg) { |
| case PMBUS_FAN_COMMAND_1: |
| case PMBUS_IOUT_OC_WARN_LIMIT: |
| case PMBUS_STATUS_WORD: |
| case PMBUS_READ_VIN: |
| case PMBUS_READ_IIN: |
| case PMBUS_READ_VOUT: |
| case PMBUS_READ_IOUT: |
| case PMBUS_READ_TEMPERATURE_1: |
| case PMBUS_READ_TEMPERATURE_2: |
| case PMBUS_READ_TEMPERATURE_3: |
| case PMBUS_READ_FAN_SPEED_1: |
| case PMBUS_READ_POUT: |
| case PMBUS_READ_PIN: |
| case PMBUS_MFR_VOUT_MIN: |
| case PMBUS_MFR_VOUT_MAX: |
| case PMBUS_MFR_IOUT_MAX: |
| case PMBUS_MFR_POUT_MAX: |
| return pmbus_read_word_data(client, page, phase, reg); |
| default: |
| return -ENXIO; |
| } |
| } |
| |
| static int dps920ab_write_word_data(struct i2c_client *client, int page, int reg, |
| u16 word) |
| { |
| /* |
| * This masks commands which are not supported. |
| * PSU only has one R/W register and that is |
| * for the fan. |
| */ |
| switch (reg) { |
| case PMBUS_FAN_COMMAND_1: |
| return pmbus_write_word_data(client, page, reg, word); |
| default: |
| return -EACCES; |
| } |
| } |
| |
| static struct pmbus_driver_info dps920ab_info = { |
| .pages = 1, |
| |
| .format[PSC_VOLTAGE_IN] = linear, |
| .format[PSC_VOLTAGE_OUT] = linear, |
| .format[PSC_CURRENT_IN] = linear, |
| .format[PSC_CURRENT_OUT] = linear, |
| .format[PSC_POWER] = linear, |
| .format[PSC_FAN] = linear, |
| .format[PSC_TEMPERATURE] = linear, |
| |
| .func[0] = |
| PMBUS_HAVE_VIN | PMBUS_HAVE_IIN | PMBUS_HAVE_PIN | |
| PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | |
| PMBUS_HAVE_TEMP | PMBUS_HAVE_TEMP2 | PMBUS_HAVE_TEMP3 | |
| PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 | |
| PMBUS_HAVE_STATUS_VOUT | PMBUS_HAVE_STATUS_IOUT | |
| PMBUS_HAVE_STATUS_INPUT | PMBUS_HAVE_STATUS_TEMP, |
| .read_word_data = dps920ab_read_word_data, |
| .write_word_data = dps920ab_write_word_data, |
| }; |
| |
| static int dps920ab_mfr_id_show(struct seq_file *s, void *data) |
| { |
| struct dps920ab_data *priv = s->private; |
| |
| seq_printf(s, "%s\n", priv->mfr_id); |
| |
| return 0; |
| } |
| |
| DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_id); |
| |
| static int dps920ab_mfr_model_show(struct seq_file *s, void *data) |
| { |
| struct dps920ab_data *priv = s->private; |
| |
| seq_printf(s, "%s\n", priv->mfr_model); |
| |
| return 0; |
| } |
| |
| DEFINE_SHOW_ATTRIBUTE(dps920ab_mfr_model); |
| |
| static void dps920ab_init_debugfs(struct dps920ab_data *data, struct i2c_client *client) |
| { |
| struct dentry *debugfs_dir; |
| struct dentry *root; |
| |
| root = pmbus_get_debugfs_dir(client); |
| if (!root) |
| return; |
| |
| debugfs_dir = debugfs_create_dir(client->name, root); |
| |
| debugfs_create_file("mfr_id", |
| 0400, |
| debugfs_dir, |
| data, |
| &dps920ab_mfr_id_fops); |
| |
| debugfs_create_file("mfr_model", |
| 0400, |
| debugfs_dir, |
| data, |
| &dps920ab_mfr_model_fops); |
| } |
| |
| static int dps920ab_probe(struct i2c_client *client) |
| { |
| u8 buf[I2C_SMBUS_BLOCK_MAX + 1]; |
| struct dps920ab_data *data; |
| int ret; |
| |
| data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL); |
| if (!data) |
| return -ENOMEM; |
| |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_ID, buf); |
| if (ret < 0) { |
| dev_err(&client->dev, "Failed to read Manufacturer ID\n"); |
| return ret; |
| } |
| |
| buf[ret] = '\0'; |
| if (ret != 5 || strncmp(buf, "DELTA", 5)) { |
| buf[ret] = '\0'; |
| dev_err(&client->dev, "Unsupported Manufacturer ID '%s'\n", buf); |
| return -ENODEV; |
| } |
| data->mfr_id = devm_kstrdup(&client->dev, buf, GFP_KERNEL); |
| if (!data->mfr_id) |
| return -ENOMEM; |
| |
| ret = i2c_smbus_read_block_data(client, PMBUS_MFR_MODEL, buf); |
| if (ret < 0) { |
| dev_err(&client->dev, "Failed to read Manufacturer Model\n"); |
| return ret; |
| } |
| |
| buf[ret] = '\0'; |
| if (ret != 11 || strncmp(buf, "DPS-920AB", 9)) { |
| dev_err(&client->dev, "Unsupported Manufacturer Model '%s'\n", buf); |
| return -ENODEV; |
| } |
| data->mfr_model = devm_kstrdup(&client->dev, buf, GFP_KERNEL); |
| if (!data->mfr_model) |
| return -ENOMEM; |
| |
| ret = pmbus_do_probe(client, &dps920ab_info); |
| if (ret) |
| return ret; |
| |
| dps920ab_init_debugfs(data, client); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id __maybe_unused dps920ab_of_match[] = { |
| { .compatible = "delta,dps920ab", }, |
| {} |
| }; |
| |
| MODULE_DEVICE_TABLE(of, dps920ab_of_match); |
| |
| static struct i2c_driver dps920ab_driver = { |
| .driver = { |
| .name = "dps920ab", |
| .of_match_table = of_match_ptr(dps920ab_of_match), |
| }, |
| .probe_new = dps920ab_probe, |
| }; |
| |
| module_i2c_driver(dps920ab_driver); |
| |
| MODULE_AUTHOR("Robert Marko <robert.marko@sartura.hr>"); |
| MODULE_DESCRIPTION("PMBus driver for Delta DPS920AB PSU"); |
| MODULE_LICENSE("GPL"); |
| MODULE_IMPORT_NS(PMBUS); |