| /* via_dma.c -- DMA support for the VIA Unichrome/Pro |
| * |
| * Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas. |
| * All Rights Reserved. |
| * |
| * Copyright 2004 Digeo, Inc., Palo Alto, CA, U.S.A. |
| * All Rights Reserved. |
| * |
| * Copyright 2004 The Unichrome project. |
| * All Rights Reserved. |
| * |
| * Permission is hereby granted, free of charge, to any person obtaining a |
| * copy of this software and associated documentation files (the "Software"), |
| * to deal in the Software without restriction, including without limitation |
| * the rights to use, copy, modify, merge, publish, distribute, sub license, |
| * and/or sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following conditions: |
| * |
| * The above copyright notice and this permission notice (including the |
| * next paragraph) shall be included in all copies or substantial portions |
| * of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR |
| * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, |
| * FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL |
| * THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM, |
| * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR |
| * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE |
| * USE OR OTHER DEALINGS IN THE SOFTWARE. |
| * |
| * Authors: |
| * Tungsten Graphics, |
| * Erdi Chen, |
| * Thomas Hellstrom. |
| */ |
| |
| #include <drm/drmP.h> |
| #include <drm/via_drm.h> |
| #include "via_drv.h" |
| #include "via_3d_reg.h" |
| |
| #define CMDBUF_ALIGNMENT_SIZE (0x100) |
| #define CMDBUF_ALIGNMENT_MASK (0x0ff) |
| |
| /* defines for VIA 3D registers */ |
| #define VIA_REG_STATUS 0x400 |
| #define VIA_REG_TRANSET 0x43C |
| #define VIA_REG_TRANSPACE 0x440 |
| |
| /* VIA_REG_STATUS(0x400): Engine Status */ |
| #define VIA_CMD_RGTR_BUSY 0x00000080 /* Command Regulator is busy */ |
| #define VIA_2D_ENG_BUSY 0x00000001 /* 2D Engine is busy */ |
| #define VIA_3D_ENG_BUSY 0x00000002 /* 3D Engine is busy */ |
| #define VIA_VR_QUEUE_BUSY 0x00020000 /* Virtual Queue is busy */ |
| |
| #define SetReg2DAGP(nReg, nData) { \ |
| *((uint32_t *)(vb)) = ((nReg) >> 2) | HALCYON_HEADER1; \ |
| *((uint32_t *)(vb) + 1) = (nData); \ |
| vb = ((uint32_t *)vb) + 2; \ |
| dev_priv->dma_low += 8; \ |
| } |
| |
| #define via_flush_write_combine() DRM_MEMORYBARRIER() |
| |
| #define VIA_OUT_RING_QW(w1, w2) do { \ |
| *vb++ = (w1); \ |
| *vb++ = (w2); \ |
| dev_priv->dma_low += 8; \ |
| } while (0) |
| |
| static void via_cmdbuf_start(drm_via_private_t *dev_priv); |
| static void via_cmdbuf_pause(drm_via_private_t *dev_priv); |
| static void via_cmdbuf_reset(drm_via_private_t *dev_priv); |
| static void via_cmdbuf_rewind(drm_via_private_t *dev_priv); |
| static int via_wait_idle(drm_via_private_t *dev_priv); |
| static void via_pad_cache(drm_via_private_t *dev_priv, int qwords); |
| |
| /* |
| * Free space in command buffer. |
| */ |
| |
| static uint32_t via_cmdbuf_space(drm_via_private_t *dev_priv) |
| { |
| uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; |
| uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base; |
| |
| return ((hw_addr <= dev_priv->dma_low) ? |
| (dev_priv->dma_high + hw_addr - dev_priv->dma_low) : |
| (hw_addr - dev_priv->dma_low)); |
| } |
| |
| /* |
| * How much does the command regulator lag behind? |
| */ |
| |
| static uint32_t via_cmdbuf_lag(drm_via_private_t *dev_priv) |
| { |
| uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; |
| uint32_t hw_addr = *(dev_priv->hw_addr_ptr) - agp_base; |
| |
| return ((hw_addr <= dev_priv->dma_low) ? |
| (dev_priv->dma_low - hw_addr) : |
| (dev_priv->dma_wrap + dev_priv->dma_low - hw_addr)); |
| } |
| |
| /* |
| * Check that the given size fits in the buffer, otherwise wait. |
| */ |
| |
| static inline int |
| via_cmdbuf_wait(drm_via_private_t *dev_priv, unsigned int size) |
| { |
| uint32_t agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; |
| uint32_t cur_addr, hw_addr, next_addr; |
| volatile uint32_t *hw_addr_ptr; |
| uint32_t count; |
| hw_addr_ptr = dev_priv->hw_addr_ptr; |
| cur_addr = dev_priv->dma_low; |
| next_addr = cur_addr + size + 512 * 1024; |
| count = 1000000; |
| do { |
| hw_addr = *hw_addr_ptr - agp_base; |
| if (count-- == 0) { |
| DRM_ERROR |
| ("via_cmdbuf_wait timed out hw %x cur_addr %x next_addr %x\n", |
| hw_addr, cur_addr, next_addr); |
| return -1; |
| } |
| if ((cur_addr < hw_addr) && (next_addr >= hw_addr)) |
| msleep(1); |
| } while ((cur_addr < hw_addr) && (next_addr >= hw_addr)); |
| return 0; |
| } |
| |
| /* |
| * Checks whether buffer head has reach the end. Rewind the ring buffer |
| * when necessary. |
| * |
| * Returns virtual pointer to ring buffer. |
| */ |
| |
| static inline uint32_t *via_check_dma(drm_via_private_t * dev_priv, |
| unsigned int size) |
| { |
| if ((dev_priv->dma_low + size + 4 * CMDBUF_ALIGNMENT_SIZE) > |
| dev_priv->dma_high) { |
| via_cmdbuf_rewind(dev_priv); |
| } |
| if (via_cmdbuf_wait(dev_priv, size) != 0) |
| return NULL; |
| |
| return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low); |
| } |
| |
| int via_dma_cleanup(struct drm_device *dev) |
| { |
| if (dev->dev_private) { |
| drm_via_private_t *dev_priv = |
| (drm_via_private_t *) dev->dev_private; |
| |
| if (dev_priv->ring.virtual_start) { |
| via_cmdbuf_reset(dev_priv); |
| |
| drm_core_ioremapfree(&dev_priv->ring.map, dev); |
| dev_priv->ring.virtual_start = NULL; |
| } |
| |
| } |
| |
| return 0; |
| } |
| |
| static int via_initialize(struct drm_device *dev, |
| drm_via_private_t *dev_priv, |
| drm_via_dma_init_t *init) |
| { |
| if (!dev_priv || !dev_priv->mmio) { |
| DRM_ERROR("via_dma_init called before via_map_init\n"); |
| return -EFAULT; |
| } |
| |
| if (dev_priv->ring.virtual_start != NULL) { |
| DRM_ERROR("called again without calling cleanup\n"); |
| return -EFAULT; |
| } |
| |
| if (!dev->agp || !dev->agp->base) { |
| DRM_ERROR("called with no agp memory available\n"); |
| return -EFAULT; |
| } |
| |
| if (dev_priv->chipset == VIA_DX9_0) { |
| DRM_ERROR("AGP DMA is not supported on this chip\n"); |
| return -EINVAL; |
| } |
| |
| dev_priv->ring.map.offset = dev->agp->base + init->offset; |
| dev_priv->ring.map.size = init->size; |
| dev_priv->ring.map.type = 0; |
| dev_priv->ring.map.flags = 0; |
| dev_priv->ring.map.mtrr = 0; |
| |
| drm_core_ioremap(&dev_priv->ring.map, dev); |
| |
| if (dev_priv->ring.map.handle == NULL) { |
| via_dma_cleanup(dev); |
| DRM_ERROR("can not ioremap virtual address for" |
| " ring buffer\n"); |
| return -ENOMEM; |
| } |
| |
| dev_priv->ring.virtual_start = dev_priv->ring.map.handle; |
| |
| dev_priv->dma_ptr = dev_priv->ring.virtual_start; |
| dev_priv->dma_low = 0; |
| dev_priv->dma_high = init->size; |
| dev_priv->dma_wrap = init->size; |
| dev_priv->dma_offset = init->offset; |
| dev_priv->last_pause_ptr = NULL; |
| dev_priv->hw_addr_ptr = |
| (volatile uint32_t *)((char *)dev_priv->mmio->handle + |
| init->reg_pause_addr); |
| |
| via_cmdbuf_start(dev_priv); |
| |
| return 0; |
| } |
| |
| static int via_dma_init(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| drm_via_private_t *dev_priv = (drm_via_private_t *) dev->dev_private; |
| drm_via_dma_init_t *init = data; |
| int retcode = 0; |
| |
| switch (init->func) { |
| case VIA_INIT_DMA: |
| if (!DRM_SUSER(DRM_CURPROC)) |
| retcode = -EPERM; |
| else |
| retcode = via_initialize(dev, dev_priv, init); |
| break; |
| case VIA_CLEANUP_DMA: |
| if (!DRM_SUSER(DRM_CURPROC)) |
| retcode = -EPERM; |
| else |
| retcode = via_dma_cleanup(dev); |
| break; |
| case VIA_DMA_INITIALIZED: |
| retcode = (dev_priv->ring.virtual_start != NULL) ? |
| 0 : -EFAULT; |
| break; |
| default: |
| retcode = -EINVAL; |
| break; |
| } |
| |
| return retcode; |
| } |
| |
| static int via_dispatch_cmdbuffer(struct drm_device *dev, drm_via_cmdbuffer_t *cmd) |
| { |
| drm_via_private_t *dev_priv; |
| uint32_t *vb; |
| int ret; |
| |
| dev_priv = (drm_via_private_t *) dev->dev_private; |
| |
| if (dev_priv->ring.virtual_start == NULL) { |
| DRM_ERROR("called without initializing AGP ring buffer.\n"); |
| return -EFAULT; |
| } |
| |
| if (cmd->size > VIA_PCI_BUF_SIZE) |
| return -ENOMEM; |
| |
| if (DRM_COPY_FROM_USER(dev_priv->pci_buf, cmd->buf, cmd->size)) |
| return -EFAULT; |
| |
| /* |
| * Running this function on AGP memory is dead slow. Therefore |
| * we run it on a temporary cacheable system memory buffer and |
| * copy it to AGP memory when ready. |
| */ |
| |
| if ((ret = |
| via_verify_command_stream((uint32_t *) dev_priv->pci_buf, |
| cmd->size, dev, 1))) { |
| return ret; |
| } |
| |
| vb = via_check_dma(dev_priv, (cmd->size < 0x100) ? 0x102 : cmd->size); |
| if (vb == NULL) |
| return -EAGAIN; |
| |
| memcpy(vb, dev_priv->pci_buf, cmd->size); |
| |
| dev_priv->dma_low += cmd->size; |
| |
| /* |
| * Small submissions somehow stalls the CPU. (AGP cache effects?) |
| * pad to greater size. |
| */ |
| |
| if (cmd->size < 0x100) |
| via_pad_cache(dev_priv, (0x100 - cmd->size) >> 3); |
| via_cmdbuf_pause(dev_priv); |
| |
| return 0; |
| } |
| |
| int via_driver_dma_quiescent(struct drm_device *dev) |
| { |
| drm_via_private_t *dev_priv = dev->dev_private; |
| |
| if (!via_wait_idle(dev_priv)) |
| return -EBUSY; |
| return 0; |
| } |
| |
| static int via_flush_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| |
| LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| return via_driver_dma_quiescent(dev); |
| } |
| |
| static int via_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| drm_via_cmdbuffer_t *cmdbuf = data; |
| int ret; |
| |
| LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); |
| |
| ret = via_dispatch_cmdbuffer(dev, cmdbuf); |
| return ret; |
| } |
| |
| static int via_dispatch_pci_cmdbuffer(struct drm_device *dev, |
| drm_via_cmdbuffer_t *cmd) |
| { |
| drm_via_private_t *dev_priv = dev->dev_private; |
| int ret; |
| |
| if (cmd->size > VIA_PCI_BUF_SIZE) |
| return -ENOMEM; |
| if (DRM_COPY_FROM_USER(dev_priv->pci_buf, cmd->buf, cmd->size)) |
| return -EFAULT; |
| |
| if ((ret = |
| via_verify_command_stream((uint32_t *) dev_priv->pci_buf, |
| cmd->size, dev, 0))) { |
| return ret; |
| } |
| |
| ret = |
| via_parse_command_stream(dev, (const uint32_t *)dev_priv->pci_buf, |
| cmd->size); |
| return ret; |
| } |
| |
| static int via_pci_cmdbuffer(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| drm_via_cmdbuffer_t *cmdbuf = data; |
| int ret; |
| |
| LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| DRM_DEBUG("buf %p size %lu\n", cmdbuf->buf, cmdbuf->size); |
| |
| ret = via_dispatch_pci_cmdbuffer(dev, cmdbuf); |
| return ret; |
| } |
| |
| static inline uint32_t *via_align_buffer(drm_via_private_t *dev_priv, |
| uint32_t * vb, int qw_count) |
| { |
| for (; qw_count > 0; --qw_count) |
| VIA_OUT_RING_QW(HC_DUMMY, HC_DUMMY); |
| return vb; |
| } |
| |
| /* |
| * This function is used internally by ring buffer management code. |
| * |
| * Returns virtual pointer to ring buffer. |
| */ |
| static inline uint32_t *via_get_dma(drm_via_private_t *dev_priv) |
| { |
| return (uint32_t *) (dev_priv->dma_ptr + dev_priv->dma_low); |
| } |
| |
| /* |
| * Hooks a segment of data into the tail of the ring-buffer by |
| * modifying the pause address stored in the buffer itself. If |
| * the regulator has already paused, restart it. |
| */ |
| static int via_hook_segment(drm_via_private_t *dev_priv, |
| uint32_t pause_addr_hi, uint32_t pause_addr_lo, |
| int no_pci_fire) |
| { |
| int paused, count; |
| volatile uint32_t *paused_at = dev_priv->last_pause_ptr; |
| uint32_t reader, ptr; |
| uint32_t diff; |
| |
| paused = 0; |
| via_flush_write_combine(); |
| (void) *(volatile uint32_t *)(via_get_dma(dev_priv) - 1); |
| |
| *paused_at = pause_addr_lo; |
| via_flush_write_combine(); |
| (void) *paused_at; |
| |
| reader = *(dev_priv->hw_addr_ptr); |
| ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) + |
| dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; |
| |
| dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1; |
| |
| /* |
| * If there is a possibility that the command reader will |
| * miss the new pause address and pause on the old one, |
| * In that case we need to program the new start address |
| * using PCI. |
| */ |
| |
| diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; |
| count = 10000000; |
| while (diff == 0 && count--) { |
| paused = (VIA_READ(0x41c) & 0x80000000); |
| if (paused) |
| break; |
| reader = *(dev_priv->hw_addr_ptr); |
| diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; |
| } |
| |
| paused = VIA_READ(0x41c) & 0x80000000; |
| |
| if (paused && !no_pci_fire) { |
| reader = *(dev_priv->hw_addr_ptr); |
| diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; |
| diff &= (dev_priv->dma_high - 1); |
| if (diff != 0 && diff < (dev_priv->dma_high >> 1)) { |
| DRM_ERROR("Paused at incorrect address. " |
| "0x%08x, 0x%08x 0x%08x\n", |
| ptr, reader, dev_priv->dma_diff); |
| } else if (diff == 0) { |
| /* |
| * There is a concern that these writes may stall the PCI bus |
| * if the GPU is not idle. However, idling the GPU first |
| * doesn't make a difference. |
| */ |
| |
| VIA_WRITE(VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); |
| VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_hi); |
| VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_lo); |
| VIA_READ(VIA_REG_TRANSPACE); |
| } |
| } |
| return paused; |
| } |
| |
| static int via_wait_idle(drm_via_private_t *dev_priv) |
| { |
| int count = 10000000; |
| |
| while (!(VIA_READ(VIA_REG_STATUS) & VIA_VR_QUEUE_BUSY) && --count) |
| ; |
| |
| while (count && (VIA_READ(VIA_REG_STATUS) & |
| (VIA_CMD_RGTR_BUSY | VIA_2D_ENG_BUSY | |
| VIA_3D_ENG_BUSY))) |
| --count; |
| return count; |
| } |
| |
| static uint32_t *via_align_cmd(drm_via_private_t *dev_priv, uint32_t cmd_type, |
| uint32_t addr, uint32_t *cmd_addr_hi, |
| uint32_t *cmd_addr_lo, int skip_wait) |
| { |
| uint32_t agp_base; |
| uint32_t cmd_addr, addr_lo, addr_hi; |
| uint32_t *vb; |
| uint32_t qw_pad_count; |
| |
| if (!skip_wait) |
| via_cmdbuf_wait(dev_priv, 2 * CMDBUF_ALIGNMENT_SIZE); |
| |
| vb = via_get_dma(dev_priv); |
| VIA_OUT_RING_QW(HC_HEADER2 | ((VIA_REG_TRANSET >> 2) << 12) | |
| (VIA_REG_TRANSPACE >> 2), HC_ParaType_PreCR << 16); |
| agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; |
| qw_pad_count = (CMDBUF_ALIGNMENT_SIZE >> 3) - |
| ((dev_priv->dma_low & CMDBUF_ALIGNMENT_MASK) >> 3); |
| |
| cmd_addr = (addr) ? addr : |
| agp_base + dev_priv->dma_low - 8 + (qw_pad_count << 3); |
| addr_lo = ((HC_SubA_HAGPBpL << 24) | (cmd_type & HC_HAGPBpID_MASK) | |
| (cmd_addr & HC_HAGPBpL_MASK)); |
| addr_hi = ((HC_SubA_HAGPBpH << 24) | (cmd_addr >> 24)); |
| |
| vb = via_align_buffer(dev_priv, vb, qw_pad_count - 1); |
| VIA_OUT_RING_QW(*cmd_addr_hi = addr_hi, *cmd_addr_lo = addr_lo); |
| return vb; |
| } |
| |
| static void via_cmdbuf_start(drm_via_private_t *dev_priv) |
| { |
| uint32_t pause_addr_lo, pause_addr_hi; |
| uint32_t start_addr, start_addr_lo; |
| uint32_t end_addr, end_addr_lo; |
| uint32_t command; |
| uint32_t agp_base; |
| uint32_t ptr; |
| uint32_t reader; |
| int count; |
| |
| dev_priv->dma_low = 0; |
| |
| agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; |
| start_addr = agp_base; |
| end_addr = agp_base + dev_priv->dma_high; |
| |
| start_addr_lo = ((HC_SubA_HAGPBstL << 24) | (start_addr & 0xFFFFFF)); |
| end_addr_lo = ((HC_SubA_HAGPBendL << 24) | (end_addr & 0xFFFFFF)); |
| command = ((HC_SubA_HAGPCMNT << 24) | (start_addr >> 24) | |
| ((end_addr & 0xff000000) >> 16)); |
| |
| dev_priv->last_pause_ptr = |
| via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, |
| &pause_addr_hi, &pause_addr_lo, 1) - 1; |
| |
| via_flush_write_combine(); |
| (void) *(volatile uint32_t *)dev_priv->last_pause_ptr; |
| |
| VIA_WRITE(VIA_REG_TRANSET, (HC_ParaType_PreCR << 16)); |
| VIA_WRITE(VIA_REG_TRANSPACE, command); |
| VIA_WRITE(VIA_REG_TRANSPACE, start_addr_lo); |
| VIA_WRITE(VIA_REG_TRANSPACE, end_addr_lo); |
| |
| VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_hi); |
| VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_lo); |
| DRM_WRITEMEMORYBARRIER(); |
| VIA_WRITE(VIA_REG_TRANSPACE, command | HC_HAGPCMNT_MASK); |
| VIA_READ(VIA_REG_TRANSPACE); |
| |
| dev_priv->dma_diff = 0; |
| |
| count = 10000000; |
| while (!(VIA_READ(0x41c) & 0x80000000) && count--); |
| |
| reader = *(dev_priv->hw_addr_ptr); |
| ptr = ((volatile char *)dev_priv->last_pause_ptr - dev_priv->dma_ptr) + |
| dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; |
| |
| /* |
| * This is the difference between where we tell the |
| * command reader to pause and where it actually pauses. |
| * This differs between hw implementation so we need to |
| * detect it. |
| */ |
| |
| dev_priv->dma_diff = ptr - reader; |
| } |
| |
| static void via_pad_cache(drm_via_private_t *dev_priv, int qwords) |
| { |
| uint32_t *vb; |
| |
| via_cmdbuf_wait(dev_priv, qwords + 2); |
| vb = via_get_dma(dev_priv); |
| VIA_OUT_RING_QW(HC_HEADER2, HC_ParaType_NotTex << 16); |
| via_align_buffer(dev_priv, vb, qwords); |
| } |
| |
| static inline void via_dummy_bitblt(drm_via_private_t *dev_priv) |
| { |
| uint32_t *vb = via_get_dma(dev_priv); |
| SetReg2DAGP(0x0C, (0 | (0 << 16))); |
| SetReg2DAGP(0x10, 0 | (0 << 16)); |
| SetReg2DAGP(0x0, 0x1 | 0x2000 | 0xAA000000); |
| } |
| |
| static void via_cmdbuf_jump(drm_via_private_t *dev_priv) |
| { |
| uint32_t agp_base; |
| uint32_t pause_addr_lo, pause_addr_hi; |
| uint32_t jump_addr_lo, jump_addr_hi; |
| volatile uint32_t *last_pause_ptr; |
| uint32_t dma_low_save1, dma_low_save2; |
| |
| agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; |
| via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi, |
| &jump_addr_lo, 0); |
| |
| dev_priv->dma_wrap = dev_priv->dma_low; |
| |
| /* |
| * Wrap command buffer to the beginning. |
| */ |
| |
| dev_priv->dma_low = 0; |
| if (via_cmdbuf_wait(dev_priv, CMDBUF_ALIGNMENT_SIZE) != 0) |
| DRM_ERROR("via_cmdbuf_jump failed\n"); |
| |
| via_dummy_bitblt(dev_priv); |
| via_dummy_bitblt(dev_priv); |
| |
| last_pause_ptr = |
| via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, |
| &pause_addr_lo, 0) - 1; |
| via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, |
| &pause_addr_lo, 0); |
| |
| *last_pause_ptr = pause_addr_lo; |
| dma_low_save1 = dev_priv->dma_low; |
| |
| /* |
| * Now, set a trap that will pause the regulator if it tries to rerun the old |
| * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause |
| * and reissues the jump command over PCI, while the regulator has already taken the jump |
| * and actually paused at the current buffer end). |
| * There appears to be no other way to detect this condition, since the hw_addr_pointer |
| * does not seem to get updated immediately when a jump occurs. |
| */ |
| |
| last_pause_ptr = |
| via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, |
| &pause_addr_lo, 0) - 1; |
| via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, |
| &pause_addr_lo, 0); |
| *last_pause_ptr = pause_addr_lo; |
| |
| dma_low_save2 = dev_priv->dma_low; |
| dev_priv->dma_low = dma_low_save1; |
| via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0); |
| dev_priv->dma_low = dma_low_save2; |
| via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); |
| } |
| |
| |
| static void via_cmdbuf_rewind(drm_via_private_t *dev_priv) |
| { |
| via_cmdbuf_jump(dev_priv); |
| } |
| |
| static void via_cmdbuf_flush(drm_via_private_t *dev_priv, uint32_t cmd_type) |
| { |
| uint32_t pause_addr_lo, pause_addr_hi; |
| |
| via_align_cmd(dev_priv, cmd_type, 0, &pause_addr_hi, &pause_addr_lo, 0); |
| via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); |
| } |
| |
| static void via_cmdbuf_pause(drm_via_private_t *dev_priv) |
| { |
| via_cmdbuf_flush(dev_priv, HC_HAGPBpID_PAUSE); |
| } |
| |
| static void via_cmdbuf_reset(drm_via_private_t *dev_priv) |
| { |
| via_cmdbuf_flush(dev_priv, HC_HAGPBpID_STOP); |
| via_wait_idle(dev_priv); |
| } |
| |
| /* |
| * User interface to the space and lag functions. |
| */ |
| |
| static int via_cmdbuf_size(struct drm_device *dev, void *data, struct drm_file *file_priv) |
| { |
| drm_via_cmdbuf_size_t *d_siz = data; |
| int ret = 0; |
| uint32_t tmp_size, count; |
| drm_via_private_t *dev_priv; |
| |
| DRM_DEBUG("\n"); |
| LOCK_TEST_WITH_RETURN(dev, file_priv); |
| |
| dev_priv = (drm_via_private_t *) dev->dev_private; |
| |
| if (dev_priv->ring.virtual_start == NULL) { |
| DRM_ERROR("called without initializing AGP ring buffer.\n"); |
| return -EFAULT; |
| } |
| |
| count = 1000000; |
| tmp_size = d_siz->size; |
| switch (d_siz->func) { |
| case VIA_CMDBUF_SPACE: |
| while (((tmp_size = via_cmdbuf_space(dev_priv)) < d_siz->size) |
| && --count) { |
| if (!d_siz->wait) |
| break; |
| } |
| if (!count) { |
| DRM_ERROR("VIA_CMDBUF_SPACE timed out.\n"); |
| ret = -EAGAIN; |
| } |
| break; |
| case VIA_CMDBUF_LAG: |
| while (((tmp_size = via_cmdbuf_lag(dev_priv)) > d_siz->size) |
| && --count) { |
| if (!d_siz->wait) |
| break; |
| } |
| if (!count) { |
| DRM_ERROR("VIA_CMDBUF_LAG timed out.\n"); |
| ret = -EAGAIN; |
| } |
| break; |
| default: |
| ret = -EFAULT; |
| } |
| d_siz->size = tmp_size; |
| |
| return ret; |
| } |
| |
| const struct drm_ioctl_desc via_ioctls[] = { |
| DRM_IOCTL_DEF_DRV(VIA_ALLOCMEM, via_mem_alloc, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_FREEMEM, via_mem_free, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_AGP_INIT, via_agp_init, DRM_AUTH|DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(VIA_FB_INIT, via_fb_init, DRM_AUTH|DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(VIA_MAP_INIT, via_map_init, DRM_AUTH|DRM_MASTER), |
| DRM_IOCTL_DEF_DRV(VIA_DEC_FUTEX, via_decoder_futex, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_DMA_INIT, via_dma_init, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_CMDBUFFER, via_cmdbuffer, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_FLUSH, via_flush_ioctl, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_PCICMD, via_pci_cmdbuffer, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_CMDBUF_SIZE, via_cmdbuf_size, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_WAIT_IRQ, via_wait_irq, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_DMA_BLIT, via_dma_blit, DRM_AUTH), |
| DRM_IOCTL_DEF_DRV(VIA_BLIT_SYNC, via_dma_blit_sync, DRM_AUTH) |
| }; |
| |
| int via_max_ioctl = DRM_ARRAY_SIZE(via_ioctls); |