| // SPDX-License-Identifier: GPL-2.0 |
| // BQ25980 Battery Charger Driver |
| // Copyright (C) 2020 Texas Instruments Incorporated - http://www.ti.com/ |
| |
| #include <linux/err.h> |
| #include <linux/i2c.h> |
| #include <linux/init.h> |
| #include <linux/interrupt.h> |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/power_supply.h> |
| #include <linux/regmap.h> |
| #include <linux/types.h> |
| #include <linux/delay.h> |
| #include <linux/device.h> |
| #include <linux/moduleparam.h> |
| #include <linux/slab.h> |
| |
| #include "bq25980_charger.h" |
| |
| struct bq25980_state { |
| bool dischg; |
| bool ovp; |
| bool ocp; |
| bool wdt; |
| bool tflt; |
| bool online; |
| bool ce; |
| bool hiz; |
| bool bypass; |
| |
| u32 vbat_adc; |
| u32 vsys_adc; |
| u32 ibat_adc; |
| }; |
| |
| enum bq25980_id { |
| BQ25980, |
| BQ25975, |
| BQ25960, |
| }; |
| |
| struct bq25980_chip_info { |
| |
| int model_id; |
| |
| const struct regmap_config *regmap_config; |
| |
| int busocp_def; |
| int busocp_sc_max; |
| int busocp_byp_max; |
| int busocp_sc_min; |
| int busocp_byp_min; |
| |
| int busovp_sc_def; |
| int busovp_byp_def; |
| int busovp_sc_step; |
| |
| int busovp_sc_offset; |
| int busovp_byp_step; |
| int busovp_byp_offset; |
| int busovp_sc_min; |
| int busovp_sc_max; |
| int busovp_byp_min; |
| int busovp_byp_max; |
| |
| int batovp_def; |
| int batovp_max; |
| int batovp_min; |
| int batovp_step; |
| int batovp_offset; |
| |
| int batocp_def; |
| int batocp_max; |
| }; |
| |
| struct bq25980_init_data { |
| u32 ichg; |
| u32 bypass_ilim; |
| u32 sc_ilim; |
| u32 vreg; |
| u32 iterm; |
| u32 iprechg; |
| u32 bypass_vlim; |
| u32 sc_vlim; |
| u32 ichg_max; |
| u32 vreg_max; |
| }; |
| |
| struct bq25980_device { |
| struct i2c_client *client; |
| struct device *dev; |
| struct power_supply *charger; |
| struct power_supply *battery; |
| struct mutex lock; |
| struct regmap *regmap; |
| |
| char model_name[I2C_NAME_SIZE]; |
| |
| struct bq25980_init_data init_data; |
| const struct bq25980_chip_info *chip_info; |
| struct bq25980_state state; |
| int watchdog_timer; |
| }; |
| |
| static struct reg_default bq25980_reg_defs[] = { |
| {BQ25980_BATOVP, 0x5A}, |
| {BQ25980_BATOVP_ALM, 0x46}, |
| {BQ25980_BATOCP, 0x51}, |
| {BQ25980_BATOCP_ALM, 0x50}, |
| {BQ25980_BATUCP_ALM, 0x28}, |
| {BQ25980_CHRGR_CTRL_1, 0x0}, |
| {BQ25980_BUSOVP, 0x26}, |
| {BQ25980_BUSOVP_ALM, 0x22}, |
| {BQ25980_BUSOCP, 0xD}, |
| {BQ25980_BUSOCP_ALM, 0xC}, |
| {BQ25980_TEMP_CONTROL, 0x30}, |
| {BQ25980_TDIE_ALM, 0xC8}, |
| {BQ25980_TSBUS_FLT, 0x15}, |
| {BQ25980_TSBAT_FLG, 0x15}, |
| {BQ25980_VAC_CONTROL, 0x0}, |
| {BQ25980_CHRGR_CTRL_2, 0x0}, |
| {BQ25980_CHRGR_CTRL_3, 0x20}, |
| {BQ25980_CHRGR_CTRL_4, 0x1D}, |
| {BQ25980_CHRGR_CTRL_5, 0x18}, |
| {BQ25980_STAT1, 0x0}, |
| {BQ25980_STAT2, 0x0}, |
| {BQ25980_STAT3, 0x0}, |
| {BQ25980_STAT4, 0x0}, |
| {BQ25980_STAT5, 0x0}, |
| {BQ25980_FLAG1, 0x0}, |
| {BQ25980_FLAG2, 0x0}, |
| {BQ25980_FLAG3, 0x0}, |
| {BQ25980_FLAG4, 0x0}, |
| {BQ25980_FLAG5, 0x0}, |
| {BQ25980_MASK1, 0x0}, |
| {BQ25980_MASK2, 0x0}, |
| {BQ25980_MASK3, 0x0}, |
| {BQ25980_MASK4, 0x0}, |
| {BQ25980_MASK5, 0x0}, |
| {BQ25980_DEVICE_INFO, 0x8}, |
| {BQ25980_ADC_CONTROL1, 0x0}, |
| {BQ25980_ADC_CONTROL2, 0x0}, |
| {BQ25980_IBUS_ADC_LSB, 0x0}, |
| {BQ25980_IBUS_ADC_MSB, 0x0}, |
| {BQ25980_VBUS_ADC_LSB, 0x0}, |
| {BQ25980_VBUS_ADC_MSB, 0x0}, |
| {BQ25980_VAC1_ADC_LSB, 0x0}, |
| {BQ25980_VAC2_ADC_LSB, 0x0}, |
| {BQ25980_VOUT_ADC_LSB, 0x0}, |
| {BQ25980_VBAT_ADC_LSB, 0x0}, |
| {BQ25980_IBAT_ADC_MSB, 0x0}, |
| {BQ25980_IBAT_ADC_LSB, 0x0}, |
| {BQ25980_TSBUS_ADC_LSB, 0x0}, |
| {BQ25980_TSBAT_ADC_LSB, 0x0}, |
| {BQ25980_TDIE_ADC_LSB, 0x0}, |
| {BQ25980_DEGLITCH_TIME, 0x0}, |
| {BQ25980_CHRGR_CTRL_6, 0x0}, |
| }; |
| |
| static struct reg_default bq25975_reg_defs[] = { |
| {BQ25980_BATOVP, 0x5A}, |
| {BQ25980_BATOVP_ALM, 0x46}, |
| {BQ25980_BATOCP, 0x51}, |
| {BQ25980_BATOCP_ALM, 0x50}, |
| {BQ25980_BATUCP_ALM, 0x28}, |
| {BQ25980_CHRGR_CTRL_1, 0x0}, |
| {BQ25980_BUSOVP, 0x26}, |
| {BQ25980_BUSOVP_ALM, 0x22}, |
| {BQ25980_BUSOCP, 0xD}, |
| {BQ25980_BUSOCP_ALM, 0xC}, |
| {BQ25980_TEMP_CONTROL, 0x30}, |
| {BQ25980_TDIE_ALM, 0xC8}, |
| {BQ25980_TSBUS_FLT, 0x15}, |
| {BQ25980_TSBAT_FLG, 0x15}, |
| {BQ25980_VAC_CONTROL, 0x0}, |
| {BQ25980_CHRGR_CTRL_2, 0x0}, |
| {BQ25980_CHRGR_CTRL_3, 0x20}, |
| {BQ25980_CHRGR_CTRL_4, 0x1D}, |
| {BQ25980_CHRGR_CTRL_5, 0x18}, |
| {BQ25980_STAT1, 0x0}, |
| {BQ25980_STAT2, 0x0}, |
| {BQ25980_STAT3, 0x0}, |
| {BQ25980_STAT4, 0x0}, |
| {BQ25980_STAT5, 0x0}, |
| {BQ25980_FLAG1, 0x0}, |
| {BQ25980_FLAG2, 0x0}, |
| {BQ25980_FLAG3, 0x0}, |
| {BQ25980_FLAG4, 0x0}, |
| {BQ25980_FLAG5, 0x0}, |
| {BQ25980_MASK1, 0x0}, |
| {BQ25980_MASK2, 0x0}, |
| {BQ25980_MASK3, 0x0}, |
| {BQ25980_MASK4, 0x0}, |
| {BQ25980_MASK5, 0x0}, |
| {BQ25980_DEVICE_INFO, 0x8}, |
| {BQ25980_ADC_CONTROL1, 0x0}, |
| {BQ25980_ADC_CONTROL2, 0x0}, |
| {BQ25980_IBUS_ADC_LSB, 0x0}, |
| {BQ25980_IBUS_ADC_MSB, 0x0}, |
| {BQ25980_VBUS_ADC_LSB, 0x0}, |
| {BQ25980_VBUS_ADC_MSB, 0x0}, |
| {BQ25980_VAC1_ADC_LSB, 0x0}, |
| {BQ25980_VAC2_ADC_LSB, 0x0}, |
| {BQ25980_VOUT_ADC_LSB, 0x0}, |
| {BQ25980_VBAT_ADC_LSB, 0x0}, |
| {BQ25980_IBAT_ADC_MSB, 0x0}, |
| {BQ25980_IBAT_ADC_LSB, 0x0}, |
| {BQ25980_TSBUS_ADC_LSB, 0x0}, |
| {BQ25980_TSBAT_ADC_LSB, 0x0}, |
| {BQ25980_TDIE_ADC_LSB, 0x0}, |
| {BQ25980_DEGLITCH_TIME, 0x0}, |
| {BQ25980_CHRGR_CTRL_6, 0x0}, |
| }; |
| |
| static struct reg_default bq25960_reg_defs[] = { |
| {BQ25980_BATOVP, 0x5A}, |
| {BQ25980_BATOVP_ALM, 0x46}, |
| {BQ25980_BATOCP, 0x51}, |
| {BQ25980_BATOCP_ALM, 0x50}, |
| {BQ25980_BATUCP_ALM, 0x28}, |
| {BQ25980_CHRGR_CTRL_1, 0x0}, |
| {BQ25980_BUSOVP, 0x26}, |
| {BQ25980_BUSOVP_ALM, 0x22}, |
| {BQ25980_BUSOCP, 0xD}, |
| {BQ25980_BUSOCP_ALM, 0xC}, |
| {BQ25980_TEMP_CONTROL, 0x30}, |
| {BQ25980_TDIE_ALM, 0xC8}, |
| {BQ25980_TSBUS_FLT, 0x15}, |
| {BQ25980_TSBAT_FLG, 0x15}, |
| {BQ25980_VAC_CONTROL, 0x0}, |
| {BQ25980_CHRGR_CTRL_2, 0x0}, |
| {BQ25980_CHRGR_CTRL_3, 0x20}, |
| {BQ25980_CHRGR_CTRL_4, 0x1D}, |
| {BQ25980_CHRGR_CTRL_5, 0x18}, |
| {BQ25980_STAT1, 0x0}, |
| {BQ25980_STAT2, 0x0}, |
| {BQ25980_STAT3, 0x0}, |
| {BQ25980_STAT4, 0x0}, |
| {BQ25980_STAT5, 0x0}, |
| {BQ25980_FLAG1, 0x0}, |
| {BQ25980_FLAG2, 0x0}, |
| {BQ25980_FLAG3, 0x0}, |
| {BQ25980_FLAG4, 0x0}, |
| {BQ25980_FLAG5, 0x0}, |
| {BQ25980_MASK1, 0x0}, |
| {BQ25980_MASK2, 0x0}, |
| {BQ25980_MASK3, 0x0}, |
| {BQ25980_MASK4, 0x0}, |
| {BQ25980_MASK5, 0x0}, |
| {BQ25980_DEVICE_INFO, 0x8}, |
| {BQ25980_ADC_CONTROL1, 0x0}, |
| {BQ25980_ADC_CONTROL2, 0x0}, |
| {BQ25980_IBUS_ADC_LSB, 0x0}, |
| {BQ25980_IBUS_ADC_MSB, 0x0}, |
| {BQ25980_VBUS_ADC_LSB, 0x0}, |
| {BQ25980_VBUS_ADC_MSB, 0x0}, |
| {BQ25980_VAC1_ADC_LSB, 0x0}, |
| {BQ25980_VAC2_ADC_LSB, 0x0}, |
| {BQ25980_VOUT_ADC_LSB, 0x0}, |
| {BQ25980_VBAT_ADC_LSB, 0x0}, |
| {BQ25980_IBAT_ADC_MSB, 0x0}, |
| {BQ25980_IBAT_ADC_LSB, 0x0}, |
| {BQ25980_TSBUS_ADC_LSB, 0x0}, |
| {BQ25980_TSBAT_ADC_LSB, 0x0}, |
| {BQ25980_TDIE_ADC_LSB, 0x0}, |
| {BQ25980_DEGLITCH_TIME, 0x0}, |
| {BQ25980_CHRGR_CTRL_6, 0x0}, |
| }; |
| |
| static int bq25980_watchdog_time[BQ25980_NUM_WD_VAL] = {5000, 10000, 50000, |
| 300000}; |
| |
| static int bq25980_get_input_curr_lim(struct bq25980_device *bq) |
| { |
| unsigned int busocp_reg_code; |
| int ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_BUSOCP, &busocp_reg_code); |
| if (ret) |
| return ret; |
| |
| return (busocp_reg_code * BQ25980_BUSOCP_STEP_uA) + BQ25980_BUSOCP_OFFSET_uA; |
| } |
| |
| static int bq25980_set_hiz(struct bq25980_device *bq, int setting) |
| { |
| return regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2, |
| BQ25980_EN_HIZ, setting); |
| } |
| |
| static int bq25980_set_input_curr_lim(struct bq25980_device *bq, int busocp) |
| { |
| unsigned int busocp_reg_code; |
| int ret; |
| |
| if (!busocp) |
| return bq25980_set_hiz(bq, BQ25980_ENABLE_HIZ); |
| |
| bq25980_set_hiz(bq, BQ25980_DISABLE_HIZ); |
| |
| if (busocp < BQ25980_BUSOCP_MIN_uA) |
| busocp = BQ25980_BUSOCP_MIN_uA; |
| |
| if (bq->state.bypass) |
| busocp = min(busocp, bq->chip_info->busocp_sc_max); |
| else |
| busocp = min(busocp, bq->chip_info->busocp_byp_max); |
| |
| busocp_reg_code = (busocp - BQ25980_BUSOCP_OFFSET_uA) |
| / BQ25980_BUSOCP_STEP_uA; |
| |
| ret = regmap_write(bq->regmap, BQ25980_BUSOCP, busocp_reg_code); |
| if (ret) |
| return ret; |
| |
| return regmap_write(bq->regmap, BQ25980_BUSOCP_ALM, busocp_reg_code); |
| } |
| |
| static int bq25980_get_input_volt_lim(struct bq25980_device *bq) |
| { |
| unsigned int busovp_reg_code; |
| unsigned int busovp_offset; |
| unsigned int busovp_step; |
| int ret; |
| |
| if (bq->state.bypass) { |
| busovp_step = bq->chip_info->busovp_byp_step; |
| busovp_offset = bq->chip_info->busovp_byp_offset; |
| } else { |
| busovp_step = bq->chip_info->busovp_sc_step; |
| busovp_offset = bq->chip_info->busovp_sc_offset; |
| } |
| |
| ret = regmap_read(bq->regmap, BQ25980_BUSOVP, &busovp_reg_code); |
| if (ret) |
| return ret; |
| |
| return (busovp_reg_code * busovp_step) + busovp_offset; |
| } |
| |
| static int bq25980_set_input_volt_lim(struct bq25980_device *bq, int busovp) |
| { |
| unsigned int busovp_reg_code; |
| unsigned int busovp_step; |
| unsigned int busovp_offset; |
| int ret; |
| |
| if (bq->state.bypass) { |
| busovp_step = bq->chip_info->busovp_byp_step; |
| busovp_offset = bq->chip_info->busovp_byp_offset; |
| if (busovp > bq->chip_info->busovp_byp_max) |
| busovp = bq->chip_info->busovp_byp_max; |
| else if (busovp < bq->chip_info->busovp_byp_min) |
| busovp = bq->chip_info->busovp_byp_min; |
| } else { |
| busovp_step = bq->chip_info->busovp_sc_step; |
| busovp_offset = bq->chip_info->busovp_sc_offset; |
| if (busovp > bq->chip_info->busovp_sc_max) |
| busovp = bq->chip_info->busovp_sc_max; |
| else if (busovp < bq->chip_info->busovp_sc_min) |
| busovp = bq->chip_info->busovp_sc_min; |
| } |
| |
| busovp_reg_code = (busovp - busovp_offset) / busovp_step; |
| |
| ret = regmap_write(bq->regmap, BQ25980_BUSOVP, busovp_reg_code); |
| if (ret) |
| return ret; |
| |
| return regmap_write(bq->regmap, BQ25980_BUSOVP_ALM, busovp_reg_code); |
| } |
| |
| static int bq25980_get_const_charge_curr(struct bq25980_device *bq) |
| { |
| unsigned int batocp_reg_code; |
| int ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_BATOCP, &batocp_reg_code); |
| if (ret) |
| return ret; |
| |
| return (batocp_reg_code & BQ25980_BATOCP_MASK) * |
| BQ25980_BATOCP_STEP_uA; |
| } |
| |
| static int bq25980_set_const_charge_curr(struct bq25980_device *bq, int batocp) |
| { |
| unsigned int batocp_reg_code; |
| int ret; |
| |
| batocp = max(batocp, BQ25980_BATOCP_MIN_uA); |
| batocp = min(batocp, bq->chip_info->batocp_max); |
| |
| batocp_reg_code = batocp / BQ25980_BATOCP_STEP_uA; |
| |
| ret = regmap_update_bits(bq->regmap, BQ25980_BATOCP, |
| BQ25980_BATOCP_MASK, batocp_reg_code); |
| if (ret) |
| return ret; |
| |
| return regmap_update_bits(bq->regmap, BQ25980_BATOCP_ALM, |
| BQ25980_BATOCP_MASK, batocp_reg_code); |
| } |
| |
| static int bq25980_get_const_charge_volt(struct bq25980_device *bq) |
| { |
| unsigned int batovp_reg_code; |
| int ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_BATOVP, &batovp_reg_code); |
| if (ret) |
| return ret; |
| |
| return ((batovp_reg_code * bq->chip_info->batovp_step) + |
| bq->chip_info->batovp_offset); |
| } |
| |
| static int bq25980_set_const_charge_volt(struct bq25980_device *bq, int batovp) |
| { |
| unsigned int batovp_reg_code; |
| int ret; |
| |
| if (batovp < bq->chip_info->batovp_min) |
| batovp = bq->chip_info->batovp_min; |
| |
| if (batovp > bq->chip_info->batovp_max) |
| batovp = bq->chip_info->batovp_max; |
| |
| batovp_reg_code = (batovp - bq->chip_info->batovp_offset) / |
| bq->chip_info->batovp_step; |
| |
| ret = regmap_write(bq->regmap, BQ25980_BATOVP, batovp_reg_code); |
| if (ret) |
| return ret; |
| |
| return regmap_write(bq->regmap, BQ25980_BATOVP_ALM, batovp_reg_code); |
| } |
| |
| static int bq25980_set_bypass(struct bq25980_device *bq, bool en_bypass) |
| { |
| int ret; |
| |
| if (en_bypass) |
| ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2, |
| BQ25980_EN_BYPASS, BQ25980_EN_BYPASS); |
| else |
| ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2, |
| BQ25980_EN_BYPASS, en_bypass); |
| if (ret) |
| return ret; |
| |
| bq->state.bypass = en_bypass; |
| |
| return bq->state.bypass; |
| } |
| |
| static int bq25980_set_chg_en(struct bq25980_device *bq, bool en_chg) |
| { |
| int ret; |
| |
| if (en_chg) |
| ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2, |
| BQ25980_CHG_EN, BQ25980_CHG_EN); |
| else |
| ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2, |
| BQ25980_CHG_EN, en_chg); |
| if (ret) |
| return ret; |
| |
| bq->state.ce = en_chg; |
| |
| return 0; |
| } |
| |
| static int bq25980_get_adc_ibus(struct bq25980_device *bq) |
| { |
| int ibus_adc_lsb, ibus_adc_msb; |
| u16 ibus_adc; |
| int ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_IBUS_ADC_MSB, &ibus_adc_msb); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_IBUS_ADC_LSB, &ibus_adc_lsb); |
| if (ret) |
| return ret; |
| |
| ibus_adc = (ibus_adc_msb << 8) | ibus_adc_lsb; |
| |
| if (ibus_adc_msb & BQ25980_ADC_POLARITY_BIT) |
| return ((ibus_adc ^ 0xffff) + 1) * BQ25980_ADC_CURR_STEP_uA; |
| |
| return ibus_adc * BQ25980_ADC_CURR_STEP_uA; |
| } |
| |
| static int bq25980_get_adc_vbus(struct bq25980_device *bq) |
| { |
| int vbus_adc_lsb, vbus_adc_msb; |
| u16 vbus_adc; |
| int ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_VBUS_ADC_MSB, &vbus_adc_msb); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_VBUS_ADC_LSB, &vbus_adc_lsb); |
| if (ret) |
| return ret; |
| |
| vbus_adc = (vbus_adc_msb << 8) | vbus_adc_lsb; |
| |
| return vbus_adc * BQ25980_ADC_VOLT_STEP_uV; |
| } |
| |
| static int bq25980_get_ibat_adc(struct bq25980_device *bq) |
| { |
| int ret; |
| int ibat_adc_lsb, ibat_adc_msb; |
| int ibat_adc; |
| |
| ret = regmap_read(bq->regmap, BQ25980_IBAT_ADC_MSB, &ibat_adc_msb); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_IBAT_ADC_LSB, &ibat_adc_lsb); |
| if (ret) |
| return ret; |
| |
| ibat_adc = (ibat_adc_msb << 8) | ibat_adc_lsb; |
| |
| if (ibat_adc_msb & BQ25980_ADC_POLARITY_BIT) |
| return ((ibat_adc ^ 0xffff) + 1) * BQ25980_ADC_CURR_STEP_uA; |
| |
| return ibat_adc * BQ25980_ADC_CURR_STEP_uA; |
| } |
| |
| static int bq25980_get_adc_vbat(struct bq25980_device *bq) |
| { |
| int vsys_adc_lsb, vsys_adc_msb; |
| u16 vsys_adc; |
| int ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_VBAT_ADC_MSB, &vsys_adc_msb); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_VBAT_ADC_LSB, &vsys_adc_lsb); |
| if (ret) |
| return ret; |
| |
| vsys_adc = (vsys_adc_msb << 8) | vsys_adc_lsb; |
| |
| return vsys_adc * BQ25980_ADC_VOLT_STEP_uV; |
| } |
| |
| static int bq25980_get_state(struct bq25980_device *bq, |
| struct bq25980_state *state) |
| { |
| unsigned int chg_ctrl_2; |
| unsigned int stat1; |
| unsigned int stat2; |
| unsigned int stat3; |
| unsigned int stat4; |
| unsigned int ibat_adc_msb; |
| int ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_STAT1, &stat1); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_STAT2, &stat2); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_STAT3, &stat3); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_STAT4, &stat4); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_CHRGR_CTRL_2, &chg_ctrl_2); |
| if (ret) |
| return ret; |
| |
| ret = regmap_read(bq->regmap, BQ25980_IBAT_ADC_MSB, &ibat_adc_msb); |
| if (ret) |
| return ret; |
| |
| state->dischg = ibat_adc_msb & BQ25980_ADC_POLARITY_BIT; |
| state->ovp = (stat1 & BQ25980_STAT1_OVP_MASK) | |
| (stat3 & BQ25980_STAT3_OVP_MASK); |
| state->ocp = (stat1 & BQ25980_STAT1_OCP_MASK) | |
| (stat2 & BQ25980_STAT2_OCP_MASK); |
| state->tflt = stat4 & BQ25980_STAT4_TFLT_MASK; |
| state->wdt = stat4 & BQ25980_WD_STAT; |
| state->online = stat3 & BQ25980_PRESENT_MASK; |
| state->ce = chg_ctrl_2 & BQ25980_CHG_EN; |
| state->hiz = chg_ctrl_2 & BQ25980_EN_HIZ; |
| state->bypass = chg_ctrl_2 & BQ25980_EN_BYPASS; |
| |
| return 0; |
| } |
| |
| static int bq25980_get_battery_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct bq25980_device *bq = power_supply_get_drvdata(psy); |
| int ret = 0; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX: |
| val->intval = bq->init_data.ichg_max; |
| break; |
| |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX: |
| val->intval = bq->init_data.vreg_max; |
| break; |
| |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| ret = bq25980_get_ibat_adc(bq); |
| val->intval = ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = bq25980_get_adc_vbat(bq); |
| if (ret < 0) |
| return ret; |
| |
| val->intval = ret; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int bq25980_set_charger_property(struct power_supply *psy, |
| enum power_supply_property prop, |
| const union power_supply_propval *val) |
| { |
| struct bq25980_device *bq = power_supply_get_drvdata(psy); |
| int ret = -EINVAL; |
| |
| switch (prop) { |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| ret = bq25980_set_input_curr_lim(bq, val->intval); |
| if (ret) |
| return ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT: |
| ret = bq25980_set_input_volt_lim(bq, val->intval); |
| if (ret) |
| return ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| ret = bq25980_set_bypass(bq, val->intval); |
| if (ret) |
| return ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_STATUS: |
| ret = bq25980_set_chg_en(bq, val->intval); |
| if (ret) |
| return ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| ret = bq25980_set_const_charge_curr(bq, val->intval); |
| if (ret) |
| return ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| ret = bq25980_set_const_charge_volt(bq, val->intval); |
| if (ret) |
| return ret; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int bq25980_get_charger_property(struct power_supply *psy, |
| enum power_supply_property psp, |
| union power_supply_propval *val) |
| { |
| struct bq25980_device *bq = power_supply_get_drvdata(psy); |
| struct bq25980_state state; |
| int ret = 0; |
| |
| mutex_lock(&bq->lock); |
| ret = bq25980_get_state(bq, &state); |
| mutex_unlock(&bq->lock); |
| if (ret) |
| return ret; |
| |
| switch (psp) { |
| case POWER_SUPPLY_PROP_MANUFACTURER: |
| val->strval = BQ25980_MANUFACTURER; |
| break; |
| case POWER_SUPPLY_PROP_MODEL_NAME: |
| val->strval = bq->model_name; |
| break; |
| case POWER_SUPPLY_PROP_ONLINE: |
| val->intval = state.online; |
| break; |
| |
| case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT: |
| ret = bq25980_get_input_volt_lim(bq); |
| if (ret < 0) |
| return ret; |
| val->intval = ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| ret = bq25980_get_input_curr_lim(bq); |
| if (ret < 0) |
| return ret; |
| |
| val->intval = ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_HEALTH: |
| val->intval = POWER_SUPPLY_HEALTH_GOOD; |
| |
| if (state.tflt) |
| val->intval = POWER_SUPPLY_HEALTH_OVERHEAT; |
| else if (state.ovp) |
| val->intval = POWER_SUPPLY_HEALTH_OVERVOLTAGE; |
| else if (state.ocp) |
| val->intval = POWER_SUPPLY_HEALTH_OVERCURRENT; |
| else if (state.wdt) |
| val->intval = |
| POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE; |
| break; |
| |
| case POWER_SUPPLY_PROP_STATUS: |
| val->intval = POWER_SUPPLY_STATUS_UNKNOWN; |
| |
| if ((state.ce) && (!state.hiz)) |
| val->intval = POWER_SUPPLY_STATUS_CHARGING; |
| else if (state.dischg) |
| val->intval = POWER_SUPPLY_STATUS_DISCHARGING; |
| else if (!state.ce) |
| val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING; |
| break; |
| |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_UNKNOWN; |
| |
| if (!state.ce) |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_NONE; |
| else if (state.bypass) |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_FAST; |
| else if (!state.bypass) |
| val->intval = POWER_SUPPLY_CHARGE_TYPE_STANDARD; |
| break; |
| |
| case POWER_SUPPLY_PROP_CURRENT_NOW: |
| ret = bq25980_get_adc_ibus(bq); |
| if (ret < 0) |
| return ret; |
| |
| val->intval = ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_VOLTAGE_NOW: |
| ret = bq25980_get_adc_vbus(bq); |
| if (ret < 0) |
| return ret; |
| |
| val->intval = ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| ret = bq25980_get_const_charge_curr(bq); |
| if (ret < 0) |
| return ret; |
| |
| val->intval = ret; |
| break; |
| |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| ret = bq25980_get_const_charge_volt(bq); |
| if (ret < 0) |
| return ret; |
| |
| val->intval = ret; |
| break; |
| |
| default: |
| return -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static bool bq25980_state_changed(struct bq25980_device *bq, |
| struct bq25980_state *new_state) |
| { |
| struct bq25980_state old_state; |
| |
| mutex_lock(&bq->lock); |
| old_state = bq->state; |
| mutex_unlock(&bq->lock); |
| |
| return (old_state.dischg != new_state->dischg || |
| old_state.ovp != new_state->ovp || |
| old_state.ocp != new_state->ocp || |
| old_state.online != new_state->online || |
| old_state.wdt != new_state->wdt || |
| old_state.tflt != new_state->tflt || |
| old_state.ce != new_state->ce || |
| old_state.hiz != new_state->hiz || |
| old_state.bypass != new_state->bypass); |
| } |
| |
| static irqreturn_t bq25980_irq_handler_thread(int irq, void *private) |
| { |
| struct bq25980_device *bq = private; |
| struct bq25980_state state; |
| int ret; |
| |
| ret = bq25980_get_state(bq, &state); |
| if (ret < 0) |
| goto irq_out; |
| |
| if (!bq25980_state_changed(bq, &state)) |
| goto irq_out; |
| |
| mutex_lock(&bq->lock); |
| bq->state = state; |
| mutex_unlock(&bq->lock); |
| |
| power_supply_changed(bq->charger); |
| |
| irq_out: |
| return IRQ_HANDLED; |
| } |
| |
| static enum power_supply_property bq25980_power_supply_props[] = { |
| POWER_SUPPLY_PROP_MANUFACTURER, |
| POWER_SUPPLY_PROP_MODEL_NAME, |
| POWER_SUPPLY_PROP_STATUS, |
| POWER_SUPPLY_PROP_ONLINE, |
| POWER_SUPPLY_PROP_HEALTH, |
| POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT, |
| POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT, |
| POWER_SUPPLY_PROP_CHARGE_TYPE, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| }; |
| |
| static enum power_supply_property bq25980_battery_props[] = { |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX, |
| POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX, |
| POWER_SUPPLY_PROP_CURRENT_NOW, |
| POWER_SUPPLY_PROP_VOLTAGE_NOW, |
| }; |
| |
| static char *bq25980_charger_supplied_to[] = { |
| "main-battery", |
| }; |
| |
| static int bq25980_property_is_writeable(struct power_supply *psy, |
| enum power_supply_property prop) |
| { |
| switch (prop) { |
| case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT: |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE: |
| case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT: |
| case POWER_SUPPLY_PROP_CHARGE_TYPE: |
| case POWER_SUPPLY_PROP_STATUS: |
| case POWER_SUPPLY_PROP_INPUT_VOLTAGE_LIMIT: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct power_supply_desc bq25980_power_supply_desc = { |
| .name = "bq25980-charger", |
| .type = POWER_SUPPLY_TYPE_MAINS, |
| .properties = bq25980_power_supply_props, |
| .num_properties = ARRAY_SIZE(bq25980_power_supply_props), |
| .get_property = bq25980_get_charger_property, |
| .set_property = bq25980_set_charger_property, |
| .property_is_writeable = bq25980_property_is_writeable, |
| }; |
| |
| static struct power_supply_desc bq25980_battery_desc = { |
| .name = "bq25980-battery", |
| .type = POWER_SUPPLY_TYPE_BATTERY, |
| .get_property = bq25980_get_battery_property, |
| .properties = bq25980_battery_props, |
| .num_properties = ARRAY_SIZE(bq25980_battery_props), |
| .property_is_writeable = bq25980_property_is_writeable, |
| }; |
| |
| |
| static bool bq25980_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| switch (reg) { |
| case BQ25980_CHRGR_CTRL_2: |
| case BQ25980_STAT1...BQ25980_FLAG5: |
| case BQ25980_ADC_CONTROL1...BQ25980_TDIE_ADC_LSB: |
| return true; |
| default: |
| return false; |
| } |
| } |
| |
| static const struct regmap_config bq25980_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = BQ25980_CHRGR_CTRL_6, |
| .reg_defaults = bq25980_reg_defs, |
| .num_reg_defaults = ARRAY_SIZE(bq25980_reg_defs), |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_reg = bq25980_is_volatile_reg, |
| }; |
| |
| static const struct regmap_config bq25975_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = BQ25980_CHRGR_CTRL_6, |
| .reg_defaults = bq25975_reg_defs, |
| .num_reg_defaults = ARRAY_SIZE(bq25975_reg_defs), |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_reg = bq25980_is_volatile_reg, |
| }; |
| |
| static const struct regmap_config bq25960_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| |
| .max_register = BQ25980_CHRGR_CTRL_6, |
| .reg_defaults = bq25960_reg_defs, |
| .num_reg_defaults = ARRAY_SIZE(bq25960_reg_defs), |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_reg = bq25980_is_volatile_reg, |
| }; |
| |
| static const struct bq25980_chip_info bq25980_chip_info_tbl[] = { |
| [BQ25980] = { |
| .model_id = BQ25980, |
| .regmap_config = &bq25980_regmap_config, |
| |
| .busocp_def = BQ25980_BUSOCP_DFLT_uA, |
| .busocp_sc_min = BQ25960_BUSOCP_SC_MAX_uA, |
| .busocp_sc_max = BQ25980_BUSOCP_SC_MAX_uA, |
| .busocp_byp_max = BQ25980_BUSOCP_BYP_MAX_uA, |
| .busocp_byp_min = BQ25980_BUSOCP_MIN_uA, |
| |
| .busovp_sc_def = BQ25980_BUSOVP_DFLT_uV, |
| .busovp_byp_def = BQ25980_BUSOVP_BYPASS_DFLT_uV, |
| .busovp_sc_step = BQ25980_BUSOVP_SC_STEP_uV, |
| .busovp_sc_offset = BQ25980_BUSOVP_SC_OFFSET_uV, |
| .busovp_byp_step = BQ25980_BUSOVP_BYP_STEP_uV, |
| .busovp_byp_offset = BQ25980_BUSOVP_BYP_OFFSET_uV, |
| .busovp_sc_min = BQ25980_BUSOVP_SC_MIN_uV, |
| .busovp_sc_max = BQ25980_BUSOVP_SC_MAX_uV, |
| .busovp_byp_min = BQ25980_BUSOVP_BYP_MIN_uV, |
| .busovp_byp_max = BQ25980_BUSOVP_BYP_MAX_uV, |
| |
| .batovp_def = BQ25980_BATOVP_DFLT_uV, |
| .batovp_max = BQ25980_BATOVP_MAX_uV, |
| .batovp_min = BQ25980_BATOVP_MIN_uV, |
| .batovp_step = BQ25980_BATOVP_STEP_uV, |
| .batovp_offset = BQ25980_BATOVP_OFFSET_uV, |
| |
| .batocp_def = BQ25980_BATOCP_DFLT_uA, |
| .batocp_max = BQ25980_BATOCP_MAX_uA, |
| }, |
| |
| [BQ25975] = { |
| .model_id = BQ25975, |
| .regmap_config = &bq25975_regmap_config, |
| |
| .busocp_def = BQ25975_BUSOCP_DFLT_uA, |
| .busocp_sc_min = BQ25975_BUSOCP_SC_MAX_uA, |
| .busocp_sc_max = BQ25975_BUSOCP_SC_MAX_uA, |
| .busocp_byp_min = BQ25980_BUSOCP_MIN_uA, |
| .busocp_byp_max = BQ25975_BUSOCP_BYP_MAX_uA, |
| |
| .busovp_sc_def = BQ25975_BUSOVP_DFLT_uV, |
| .busovp_byp_def = BQ25975_BUSOVP_BYPASS_DFLT_uV, |
| .busovp_sc_step = BQ25975_BUSOVP_SC_STEP_uV, |
| .busovp_sc_offset = BQ25975_BUSOVP_SC_OFFSET_uV, |
| .busovp_byp_step = BQ25975_BUSOVP_BYP_STEP_uV, |
| .busovp_byp_offset = BQ25975_BUSOVP_BYP_OFFSET_uV, |
| .busovp_sc_min = BQ25975_BUSOVP_SC_MIN_uV, |
| .busovp_sc_max = BQ25975_BUSOVP_SC_MAX_uV, |
| .busovp_byp_min = BQ25975_BUSOVP_BYP_MIN_uV, |
| .busovp_byp_max = BQ25975_BUSOVP_BYP_MAX_uV, |
| |
| .batovp_def = BQ25975_BATOVP_DFLT_uV, |
| .batovp_max = BQ25975_BATOVP_MAX_uV, |
| .batovp_min = BQ25975_BATOVP_MIN_uV, |
| .batovp_step = BQ25975_BATOVP_STEP_uV, |
| .batovp_offset = BQ25975_BATOVP_OFFSET_uV, |
| |
| .batocp_def = BQ25980_BATOCP_DFLT_uA, |
| .batocp_max = BQ25980_BATOCP_MAX_uA, |
| }, |
| |
| [BQ25960] = { |
| .model_id = BQ25960, |
| .regmap_config = &bq25960_regmap_config, |
| |
| .busocp_def = BQ25960_BUSOCP_DFLT_uA, |
| .busocp_sc_min = BQ25960_BUSOCP_SC_MAX_uA, |
| .busocp_sc_max = BQ25960_BUSOCP_SC_MAX_uA, |
| .busocp_byp_min = BQ25960_BUSOCP_SC_MAX_uA, |
| .busocp_byp_max = BQ25960_BUSOCP_BYP_MAX_uA, |
| |
| .busovp_sc_def = BQ25975_BUSOVP_DFLT_uV, |
| .busovp_byp_def = BQ25975_BUSOVP_BYPASS_DFLT_uV, |
| .busovp_sc_step = BQ25960_BUSOVP_SC_STEP_uV, |
| .busovp_sc_offset = BQ25960_BUSOVP_SC_OFFSET_uV, |
| .busovp_byp_step = BQ25960_BUSOVP_BYP_STEP_uV, |
| .busovp_byp_offset = BQ25960_BUSOVP_BYP_OFFSET_uV, |
| .busovp_sc_min = BQ25960_BUSOVP_SC_MIN_uV, |
| .busovp_sc_max = BQ25960_BUSOVP_SC_MAX_uV, |
| .busovp_byp_min = BQ25960_BUSOVP_BYP_MIN_uV, |
| .busovp_byp_max = BQ25960_BUSOVP_BYP_MAX_uV, |
| |
| .batovp_def = BQ25960_BATOVP_DFLT_uV, |
| .batovp_max = BQ25960_BATOVP_MAX_uV, |
| .batovp_min = BQ25960_BATOVP_MIN_uV, |
| .batovp_step = BQ25960_BATOVP_STEP_uV, |
| .batovp_offset = BQ25960_BATOVP_OFFSET_uV, |
| |
| .batocp_def = BQ25960_BATOCP_DFLT_uA, |
| .batocp_max = BQ25960_BATOCP_MAX_uA, |
| }, |
| }; |
| |
| static int bq25980_power_supply_init(struct bq25980_device *bq, |
| struct device *dev) |
| { |
| struct power_supply_config psy_cfg = { .drv_data = bq, |
| .of_node = dev->of_node, }; |
| |
| psy_cfg.supplied_to = bq25980_charger_supplied_to; |
| psy_cfg.num_supplicants = ARRAY_SIZE(bq25980_charger_supplied_to); |
| |
| bq->charger = devm_power_supply_register(bq->dev, |
| &bq25980_power_supply_desc, |
| &psy_cfg); |
| if (IS_ERR(bq->charger)) |
| return -EINVAL; |
| |
| bq->battery = devm_power_supply_register(bq->dev, |
| &bq25980_battery_desc, |
| &psy_cfg); |
| if (IS_ERR(bq->battery)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static int bq25980_hw_init(struct bq25980_device *bq) |
| { |
| struct power_supply_battery_info bat_info = { }; |
| int wd_reg_val = BQ25980_WATCHDOG_DIS; |
| int wd_max_val = BQ25980_NUM_WD_VAL - 1; |
| int ret = 0; |
| int curr_val; |
| int volt_val; |
| int i; |
| |
| if (bq->watchdog_timer) { |
| if (bq->watchdog_timer >= bq25980_watchdog_time[wd_max_val]) |
| wd_reg_val = wd_max_val; |
| else { |
| for (i = 0; i < wd_max_val; i++) { |
| if (bq->watchdog_timer > bq25980_watchdog_time[i] && |
| bq->watchdog_timer < bq25980_watchdog_time[i + 1]) { |
| wd_reg_val = i; |
| break; |
| } |
| } |
| } |
| } |
| |
| ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_3, |
| BQ25980_WATCHDOG_MASK, wd_reg_val); |
| if (ret) |
| return ret; |
| |
| ret = power_supply_get_battery_info(bq->charger, &bat_info); |
| if (ret) { |
| dev_warn(bq->dev, "battery info missing\n"); |
| return -EINVAL; |
| } |
| |
| bq->init_data.ichg_max = bat_info.constant_charge_current_max_ua; |
| bq->init_data.vreg_max = bat_info.constant_charge_voltage_max_uv; |
| |
| if (bq->state.bypass) { |
| ret = regmap_update_bits(bq->regmap, BQ25980_CHRGR_CTRL_2, |
| BQ25980_EN_BYPASS, BQ25980_EN_BYPASS); |
| if (ret) |
| return ret; |
| |
| curr_val = bq->init_data.bypass_ilim; |
| volt_val = bq->init_data.bypass_vlim; |
| } else { |
| curr_val = bq->init_data.sc_ilim; |
| volt_val = bq->init_data.sc_vlim; |
| } |
| |
| ret = bq25980_set_input_curr_lim(bq, curr_val); |
| if (ret) |
| return ret; |
| |
| ret = bq25980_set_input_volt_lim(bq, volt_val); |
| if (ret) |
| return ret; |
| |
| return regmap_update_bits(bq->regmap, BQ25980_ADC_CONTROL1, |
| BQ25980_ADC_EN, BQ25980_ADC_EN); |
| } |
| |
| static int bq25980_parse_dt(struct bq25980_device *bq) |
| { |
| int ret; |
| |
| ret = device_property_read_u32(bq->dev, "ti,watchdog-timeout-ms", |
| &bq->watchdog_timer); |
| if (ret) |
| bq->watchdog_timer = BQ25980_WATCHDOG_MIN; |
| |
| if (bq->watchdog_timer > BQ25980_WATCHDOG_MAX || |
| bq->watchdog_timer < BQ25980_WATCHDOG_MIN) |
| return -EINVAL; |
| |
| ret = device_property_read_u32(bq->dev, |
| "ti,sc-ovp-limit-microvolt", |
| &bq->init_data.sc_vlim); |
| if (ret) |
| bq->init_data.sc_vlim = bq->chip_info->busovp_sc_def; |
| |
| if (bq->init_data.sc_vlim > bq->chip_info->busovp_sc_max || |
| bq->init_data.sc_vlim < bq->chip_info->busovp_sc_min) { |
| dev_err(bq->dev, "SC ovp limit is out of range\n"); |
| return -EINVAL; |
| } |
| |
| ret = device_property_read_u32(bq->dev, |
| "ti,sc-ocp-limit-microamp", |
| &bq->init_data.sc_ilim); |
| if (ret) |
| bq->init_data.sc_ilim = bq->chip_info->busocp_def; |
| |
| if (bq->init_data.sc_ilim > bq->chip_info->busocp_sc_max || |
| bq->init_data.sc_ilim < bq->chip_info->busocp_sc_min) { |
| dev_err(bq->dev, "SC ocp limit is out of range\n"); |
| return -EINVAL; |
| } |
| |
| ret = device_property_read_u32(bq->dev, |
| "ti,bypass-ovp-limit-microvolt", |
| &bq->init_data.bypass_vlim); |
| if (ret) |
| bq->init_data.bypass_vlim = bq->chip_info->busovp_byp_def; |
| |
| if (bq->init_data.bypass_vlim > bq->chip_info->busovp_byp_max || |
| bq->init_data.bypass_vlim < bq->chip_info->busovp_byp_min) { |
| dev_err(bq->dev, "Bypass ovp limit is out of range\n"); |
| return -EINVAL; |
| } |
| |
| ret = device_property_read_u32(bq->dev, |
| "ti,bypass-ocp-limit-microamp", |
| &bq->init_data.bypass_ilim); |
| if (ret) |
| bq->init_data.bypass_ilim = bq->chip_info->busocp_def; |
| |
| if (bq->init_data.bypass_ilim > bq->chip_info->busocp_byp_max || |
| bq->init_data.bypass_ilim < bq->chip_info->busocp_byp_min) { |
| dev_err(bq->dev, "Bypass ocp limit is out of range\n"); |
| return -EINVAL; |
| } |
| |
| |
| bq->state.bypass = device_property_read_bool(bq->dev, |
| "ti,bypass-enable"); |
| return 0; |
| } |
| |
| static int bq25980_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device *dev = &client->dev; |
| struct bq25980_device *bq; |
| int ret; |
| |
| bq = devm_kzalloc(dev, sizeof(*bq), GFP_KERNEL); |
| if (!bq) |
| return -ENOMEM; |
| |
| bq->client = client; |
| bq->dev = dev; |
| |
| mutex_init(&bq->lock); |
| |
| strncpy(bq->model_name, id->name, I2C_NAME_SIZE); |
| bq->chip_info = &bq25980_chip_info_tbl[id->driver_data]; |
| |
| bq->regmap = devm_regmap_init_i2c(client, |
| bq->chip_info->regmap_config); |
| if (IS_ERR(bq->regmap)) { |
| dev_err(dev, "Failed to allocate register map\n"); |
| return PTR_ERR(bq->regmap); |
| } |
| |
| i2c_set_clientdata(client, bq); |
| |
| ret = bq25980_parse_dt(bq); |
| if (ret) { |
| dev_err(dev, "Failed to read device tree properties%d\n", ret); |
| return ret; |
| } |
| |
| if (client->irq) { |
| ret = devm_request_threaded_irq(dev, client->irq, NULL, |
| bq25980_irq_handler_thread, |
| IRQF_TRIGGER_FALLING | |
| IRQF_ONESHOT, |
| dev_name(&client->dev), bq); |
| if (ret) |
| return ret; |
| } |
| |
| ret = bq25980_power_supply_init(bq, dev); |
| if (ret) { |
| dev_err(dev, "Failed to register power supply\n"); |
| return ret; |
| } |
| |
| ret = bq25980_hw_init(bq); |
| if (ret) { |
| dev_err(dev, "Cannot initialize the chip.\n"); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static const struct i2c_device_id bq25980_i2c_ids[] = { |
| { "bq25980", BQ25980 }, |
| { "bq25975", BQ25975 }, |
| { "bq25975", BQ25975 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, bq25980_i2c_ids); |
| |
| static const struct of_device_id bq25980_of_match[] = { |
| { .compatible = "ti,bq25980", .data = (void *)BQ25980 }, |
| { .compatible = "ti,bq25975", .data = (void *)BQ25975 }, |
| { .compatible = "ti,bq25960", .data = (void *)BQ25960 }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, bq25980_of_match); |
| |
| static struct i2c_driver bq25980_driver = { |
| .driver = { |
| .name = "bq25980-charger", |
| .of_match_table = bq25980_of_match, |
| }, |
| .probe = bq25980_probe, |
| .id_table = bq25980_i2c_ids, |
| }; |
| module_i2c_driver(bq25980_driver); |
| |
| MODULE_AUTHOR("Dan Murphy <dmurphy@ti.com>"); |
| MODULE_AUTHOR("Ricardo Rivera-Matos <r-rivera-matos@ti.com>"); |
| MODULE_DESCRIPTION("bq25980 charger driver"); |
| MODULE_LICENSE("GPL v2"); |