blob: 3f1795fb4fe72934d5f0a249713b7369f0cb06f1 [file] [log] [blame]
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (C) 2020 Marvell International Ltd.
*
* Device tree for the CN9132-DB board.
*/
#include "cn9131-db.dtsi"
/ {
compatible = "marvell,cn9132", "marvell,cn9131", "marvell,cn9130",
"marvell,armada-ap807-quad", "marvell,armada-ap807";
aliases {
gpio5 = &cp2_gpio1;
gpio6 = &cp2_gpio2;
ethernet5 = &cp2_eth0;
};
cp2_reg_usb3_vbus0: cp2_usb3_vbus@0 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci0-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&cp2_gpio1 2 GPIO_ACTIVE_HIGH>;
};
cp2_usb3_0_phy0: cp2_usb3_phy0 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp2_reg_usb3_vbus0>;
};
cp2_reg_usb3_vbus1: cp2_usb3_vbus@1 {
compatible = "regulator-fixed";
regulator-name = "cp2-xhci1-vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
enable-active-high;
gpio = <&cp2_gpio1 3 GPIO_ACTIVE_HIGH>;
};
cp2_usb3_0_phy1: cp2_usb3_phy1 {
compatible = "usb-nop-xceiv";
vcc-supply = <&cp2_reg_usb3_vbus1>;
};
cp2_reg_sd_vccq: cp2_sd_vccq@0 {
compatible = "regulator-gpio";
regulator-name = "cp2_sd_vcc";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
gpios = <&cp2_gpio2 17 GPIO_ACTIVE_HIGH>;
states = <1800000 0x1 3300000 0x0>;
};
cp2_sfp_eth0: sfp-eth0 {
compatible = "sff,sfp";
i2c-bus = <&cp2_sfpp0_i2c>;
los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
/*
* SFP cages are unconnected on early PCBs because of an the I2C
* lanes not being connected. Prevent the port for being
* unusable by disabling the SFP node.
*/
status = "disabled";
};
};
/*
* Instantiate the second slave CP115
*/
#define CP11X_NAME cp2
#define CP11X_BASE f6000000
#define CP11X_PCIEx_MEM_BASE(iface) (0xe5000000 + (iface * 0x1000000))
#define CP11X_PCIEx_MEM_SIZE(iface) 0xf00000
#define CP11X_PCIE0_BASE f6600000
#define CP11X_PCIE1_BASE f6620000
#define CP11X_PCIE2_BASE f6640000
#include "armada-cp115.dtsi"
#undef CP11X_NAME
#undef CP11X_BASE
#undef CP11X_PCIEx_MEM_BASE
#undef CP11X_PCIEx_MEM_SIZE
#undef CP11X_PCIE0_BASE
#undef CP11X_PCIE1_BASE
#undef CP11X_PCIE2_BASE
&cp2_crypto {
status = "disabled";
};
&cp2_ethernet {
status = "okay";
};
/* SLM-1521-V2, CON9 */
&cp2_eth0 {
status = "disabled";
phy-mode = "10gbase-r";
/* Generic PHY, providing serdes lanes */
phys = <&cp2_comphy4 0>;
managed = "in-band-status";
sfp = <&cp2_sfp_eth0>;
};
&cp2_gpio1 {
status = "okay";
};
&cp2_gpio2 {
status = "okay";
};
&cp2_i2c0 {
clock-frequency = <100000>;
/* SLM-1521-V2 - U3 */
i2c-mux@72 {
compatible = "nxp,pca9544";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72>;
cp2_sfpp0_i2c: i2c@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
};
i2c@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
/* U12 */
cp2_module_expander1: pca9555@21 {
compatible = "nxp,pca9555";
pinctrl-names = "default";
gpio-controller;
#gpio-cells = <2>;
reg = <0x21>;
};
};
};
};
/* SLM-1521-V2, CON6 */
&cp2_pcie0 {
status = "okay";
num-lanes = <2>;
num-viewport = <8>;
/* Generic PHY, providing serdes lanes */
phys = <&cp2_comphy0 0
&cp2_comphy1 0>;
};
/* SLM-1521-V2, CON8 */
&cp2_pcie2 {
status = "okay";
num-lanes = <1>;
num-viewport = <8>;
/* Generic PHY, providing serdes lanes */
phys = <&cp2_comphy5 2>;
};
&cp2_sata0 {
status = "okay";
/* SLM-1521-V2, CON4 */
sata-port@0 {
/* Generic PHY, providing serdes lanes */
phys = <&cp2_comphy2 0>;
};
};
/* CON 2 on SLM-1683 - microSD */
&cp2_sdhci0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&cp2_sdhci_pins>;
bus-width = <4>;
cd-gpios = <&cp2_gpio2 23 GPIO_ACTIVE_LOW>;
vqmmc-supply = <&cp2_reg_sd_vccq>;
};
&cp2_syscon0 {
cp2_pinctrl: pinctrl {
compatible = "marvell,cp115-standalone-pinctrl";
cp2_i2c0_pins: cp2-i2c-pins-0 {
marvell,pins = "mpp37", "mpp38";
marvell,function = "i2c0";
};
cp2_sdhci_pins: cp2-sdhi-pins-0 {
marvell,pins = "mpp56", "mpp57", "mpp58",
"mpp59", "mpp60", "mpp61";
marvell,function = "sdio";
};
};
};
&cp2_utmi {
status = "okay";
};
&cp2_usb3_0 {
status = "okay";
usb-phy = <&cp2_usb3_0_phy0>;
phys = <&cp2_utmi0>;
phy-names = "usb";
dr_mode = "host";
};
/* SLM-1521-V2, CON11 */
&cp2_usb3_1 {
status = "okay";
usb-phy = <&cp2_usb3_0_phy1>;
/* Generic PHY, providing serdes lanes */
phys = <&cp2_comphy3 1>, <&cp2_utmi1>;
phy-names = "usb", "utmi";
dr_mode = "host";
};