| #!/bin/bash |
| # SPDX-License-Identifier: GPL-2.0 |
| |
| rndh=$(printf %x $sec)-$(mktemp -u XXXXXX) |
| ns1="ns1-$rndh" |
| ns2="ns2-$rndh" |
| ns3="ns3-$rndh" |
| capture=false |
| ksft_skip=4 |
| timeout_poll=30 |
| timeout_test=$((timeout_poll * 2 + 1)) |
| test_cnt=1 |
| ret=0 |
| bail=0 |
| |
| usage() { |
| echo "Usage: $0 [ -b ] [ -c ] [ -d ]" |
| echo -e "\t-b: bail out after first error, otherwise runs al testcases" |
| echo -e "\t-c: capture packets for each test using tcpdump (default: no capture)" |
| echo -e "\t-d: debug this script" |
| } |
| |
| cleanup() |
| { |
| rm -f "$cout" "$sout" |
| rm -f "$large" "$small" |
| rm -f "$capout" |
| |
| local netns |
| for netns in "$ns1" "$ns2" "$ns3";do |
| ip netns del $netns |
| done |
| } |
| |
| ip -Version > /dev/null 2>&1 |
| if [ $? -ne 0 ];then |
| echo "SKIP: Could not run test without ip tool" |
| exit $ksft_skip |
| fi |
| |
| # "$ns1" ns2 ns3 |
| # ns1eth1 ns2eth1 ns2eth3 ns3eth1 |
| # netem |
| # ns1eth2 ns2eth2 |
| # netem |
| |
| setup() |
| { |
| large=$(mktemp) |
| small=$(mktemp) |
| sout=$(mktemp) |
| cout=$(mktemp) |
| capout=$(mktemp) |
| size=$((2 * 2048 * 4096)) |
| dd if=/dev/zero of=$small bs=4096 count=20 >/dev/null 2>&1 |
| dd if=/dev/zero of=$large bs=4096 count=$((size / 4096)) >/dev/null 2>&1 |
| |
| trap cleanup EXIT |
| |
| for i in "$ns1" "$ns2" "$ns3";do |
| ip netns add $i || exit $ksft_skip |
| ip -net $i link set lo up |
| ip netns exec $i sysctl -q net.ipv4.conf.all.rp_filter=0 |
| ip netns exec $i sysctl -q net.ipv4.conf.default.rp_filter=0 |
| done |
| |
| ip link add ns1eth1 netns "$ns1" type veth peer name ns2eth1 netns "$ns2" |
| ip link add ns1eth2 netns "$ns1" type veth peer name ns2eth2 netns "$ns2" |
| ip link add ns2eth3 netns "$ns2" type veth peer name ns3eth1 netns "$ns3" |
| |
| ip -net "$ns1" addr add 10.0.1.1/24 dev ns1eth1 |
| ip -net "$ns1" addr add dead:beef:1::1/64 dev ns1eth1 nodad |
| ip -net "$ns1" link set ns1eth1 up mtu 1500 |
| ip -net "$ns1" route add default via 10.0.1.2 |
| ip -net "$ns1" route add default via dead:beef:1::2 |
| |
| ip -net "$ns1" addr add 10.0.2.1/24 dev ns1eth2 |
| ip -net "$ns1" addr add dead:beef:2::1/64 dev ns1eth2 nodad |
| ip -net "$ns1" link set ns1eth2 up mtu 1500 |
| ip -net "$ns1" route add default via 10.0.2.2 metric 101 |
| ip -net "$ns1" route add default via dead:beef:2::2 metric 101 |
| |
| ip netns exec "$ns1" ./pm_nl_ctl limits 1 1 |
| ip netns exec "$ns1" ./pm_nl_ctl add 10.0.2.1 dev ns1eth2 flags subflow |
| |
| ip -net "$ns2" addr add 10.0.1.2/24 dev ns2eth1 |
| ip -net "$ns2" addr add dead:beef:1::2/64 dev ns2eth1 nodad |
| ip -net "$ns2" link set ns2eth1 up mtu 1500 |
| |
| ip -net "$ns2" addr add 10.0.2.2/24 dev ns2eth2 |
| ip -net "$ns2" addr add dead:beef:2::2/64 dev ns2eth2 nodad |
| ip -net "$ns2" link set ns2eth2 up mtu 1500 |
| |
| ip -net "$ns2" addr add 10.0.3.2/24 dev ns2eth3 |
| ip -net "$ns2" addr add dead:beef:3::2/64 dev ns2eth3 nodad |
| ip -net "$ns2" link set ns2eth3 up mtu 1500 |
| ip netns exec "$ns2" sysctl -q net.ipv4.ip_forward=1 |
| ip netns exec "$ns2" sysctl -q net.ipv6.conf.all.forwarding=1 |
| |
| ip -net "$ns3" addr add 10.0.3.3/24 dev ns3eth1 |
| ip -net "$ns3" addr add dead:beef:3::3/64 dev ns3eth1 nodad |
| ip -net "$ns3" link set ns3eth1 up mtu 1500 |
| ip -net "$ns3" route add default via 10.0.3.2 |
| ip -net "$ns3" route add default via dead:beef:3::2 |
| |
| ip netns exec "$ns3" ./pm_nl_ctl limits 1 1 |
| } |
| |
| # $1: ns, $2: port |
| wait_local_port_listen() |
| { |
| local listener_ns="${1}" |
| local port="${2}" |
| |
| local port_hex i |
| |
| port_hex="$(printf "%04X" "${port}")" |
| for i in $(seq 10); do |
| ip netns exec "${listener_ns}" cat /proc/net/tcp* | \ |
| awk "BEGIN {rc=1} {if (\$2 ~ /:${port_hex}\$/ && \$4 ~ /0A/) {rc=0; exit}} END {exit rc}" && |
| break |
| sleep 0.1 |
| done |
| } |
| |
| do_transfer() |
| { |
| local cin=$1 |
| local sin=$2 |
| local max_time=$3 |
| local port |
| port=$((10000+$test_cnt)) |
| test_cnt=$((test_cnt+1)) |
| |
| :> "$cout" |
| :> "$sout" |
| :> "$capout" |
| |
| local addr_port |
| addr_port=$(printf "%s:%d" ${connect_addr} ${port}) |
| |
| if $capture; then |
| local capuser |
| if [ -z $SUDO_USER ] ; then |
| capuser="" |
| else |
| capuser="-Z $SUDO_USER" |
| fi |
| |
| local capfile="${rndh}-${port}" |
| local capopt="-i any -s 65535 -B 32768 ${capuser}" |
| |
| ip netns exec ${ns3} tcpdump ${capopt} -w "${capfile}-listener.pcap" >> "${capout}" 2>&1 & |
| local cappid_listener=$! |
| |
| ip netns exec ${ns1} tcpdump ${capopt} -w "${capfile}-connector.pcap" >> "${capout}" 2>&1 & |
| local cappid_connector=$! |
| |
| sleep 1 |
| fi |
| |
| timeout ${timeout_test} \ |
| ip netns exec ${ns3} \ |
| ./mptcp_connect -jt ${timeout_poll} -l -p $port -T $time \ |
| 0.0.0.0 < "$sin" > "$sout" & |
| local spid=$! |
| |
| wait_local_port_listen "${ns3}" "${port}" |
| |
| timeout ${timeout_test} \ |
| ip netns exec ${ns1} \ |
| ./mptcp_connect -jt ${timeout_poll} -p $port -T $time \ |
| 10.0.3.3 < "$cin" > "$cout" & |
| local cpid=$! |
| |
| wait $cpid |
| local retc=$? |
| wait $spid |
| local rets=$? |
| |
| if $capture; then |
| sleep 1 |
| kill ${cappid_listener} |
| kill ${cappid_connector} |
| fi |
| |
| cmp $sin $cout > /dev/null 2>&1 |
| local cmps=$? |
| cmp $cin $sout > /dev/null 2>&1 |
| local cmpc=$? |
| |
| printf "%-16s" " max $max_time " |
| if [ $retc -eq 0 ] && [ $rets -eq 0 ] && \ |
| [ $cmpc -eq 0 ] && [ $cmps -eq 0 ]; then |
| echo "[ OK ]" |
| cat "$capout" |
| return 0 |
| fi |
| |
| echo " [ fail ]" |
| echo "client exit code $retc, server $rets" 1>&2 |
| echo -e "\nnetns ${ns3} socket stat for $port:" 1>&2 |
| ip netns exec ${ns3} ss -nita 1>&2 -o "sport = :$port" |
| echo -e "\nnetns ${ns1} socket stat for $port:" 1>&2 |
| ip netns exec ${ns1} ss -nita 1>&2 -o "dport = :$port" |
| ls -l $sin $cout |
| ls -l $cin $sout |
| |
| cat "$capout" |
| return 1 |
| } |
| |
| run_test() |
| { |
| local rate1=$1 |
| local rate2=$2 |
| local delay1=$3 |
| local delay2=$4 |
| local lret |
| local dev |
| shift 4 |
| local msg=$* |
| |
| [ $delay1 -gt 0 ] && delay1="delay $delay1" || delay1="" |
| [ $delay2 -gt 0 ] && delay2="delay $delay2" || delay2="" |
| |
| for dev in ns1eth1 ns1eth2; do |
| tc -n $ns1 qdisc del dev $dev root >/dev/null 2>&1 |
| done |
| for dev in ns2eth1 ns2eth2; do |
| tc -n $ns2 qdisc del dev $dev root >/dev/null 2>&1 |
| done |
| tc -n $ns1 qdisc add dev ns1eth1 root netem rate ${rate1}mbit $delay1 |
| tc -n $ns1 qdisc add dev ns1eth2 root netem rate ${rate2}mbit $delay2 |
| tc -n $ns2 qdisc add dev ns2eth1 root netem rate ${rate1}mbit $delay1 |
| tc -n $ns2 qdisc add dev ns2eth2 root netem rate ${rate2}mbit $delay2 |
| |
| # time is measured in ms, account for transfer size, affegated link speed |
| # and header overhead (10%) |
| local time=$((size * 8 * 1000 * 10 / (( $rate1 + $rate2) * 1024 *1024 * 9) )) |
| |
| # mptcp_connect will do some sleeps to allow the mp_join handshake |
| # completion (see mptcp_connect): 200ms on each side, add some slack |
| time=$((time + 450)) |
| |
| printf "%-60s" "$msg" |
| do_transfer $small $large $time |
| lret=$? |
| if [ $lret -ne 0 ]; then |
| ret=$lret |
| [ $bail -eq 0 ] || exit $ret |
| fi |
| |
| printf "%-60s" "$msg - reverse direction" |
| do_transfer $large $small $time |
| lret=$? |
| if [ $lret -ne 0 ]; then |
| ret=$lret |
| [ $bail -eq 0 ] || exit $ret |
| fi |
| } |
| |
| while getopts "bcdh" option;do |
| case "$option" in |
| "h") |
| usage $0 |
| exit 0 |
| ;; |
| "b") |
| bail=1 |
| ;; |
| "c") |
| capture=true |
| ;; |
| "d") |
| set -x |
| ;; |
| "?") |
| usage $0 |
| exit 1 |
| ;; |
| esac |
| done |
| |
| setup |
| run_test 10 10 0 0 "balanced bwidth" |
| run_test 10 10 1 50 "balanced bwidth with unbalanced delay" |
| |
| # we still need some additional infrastructure to pass the following test-cases |
| run_test 30 10 0 0 "unbalanced bwidth" |
| run_test 30 10 1 50 "unbalanced bwidth with unbalanced delay" |
| run_test 30 10 50 1 "unbalanced bwidth with opposed, unbalanced delay" |
| exit $ret |
