| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC |
| * |
| * Authors: |
| * Serge Semin <Sergey.Semin@baikalelectronics.ru> |
| * |
| * Baikal-T1 APB-bus driver |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/types.h> |
| #include <linux/device.h> |
| #include <linux/atomic.h> |
| #include <linux/platform_device.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/nmi.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| #include <linux/clk.h> |
| #include <linux/reset.h> |
| #include <linux/time64.h> |
| #include <linux/sysfs.h> |
| |
| #define APB_EHB_ISR 0x00 |
| #define APB_EHB_ISR_PENDING BIT(0) |
| #define APB_EHB_ISR_MASK BIT(1) |
| #define APB_EHB_ADDR 0x04 |
| #define APB_EHB_TIMEOUT 0x08 |
| |
| #define APB_EHB_TIMEOUT_MIN 0x000003FFU |
| #define APB_EHB_TIMEOUT_MAX 0xFFFFFFFFU |
| |
| /* |
| * struct bt1_apb - Baikal-T1 APB EHB private data |
| * @dev: Pointer to the device structure. |
| * @regs: APB EHB registers map. |
| * @res: No-device error injection memory region. |
| * @irq: Errors IRQ number. |
| * @rate: APB-bus reference clock rate. |
| * @pclk: APB-reference clock. |
| * @prst: APB domain reset line. |
| * @count: Number of errors detected. |
| */ |
| struct bt1_apb { |
| struct device *dev; |
| |
| struct regmap *regs; |
| void __iomem *res; |
| int irq; |
| |
| unsigned long rate; |
| struct clk *pclk; |
| |
| struct reset_control *prst; |
| |
| atomic_t count; |
| }; |
| |
| static const struct regmap_config bt1_apb_regmap_cfg = { |
| .reg_bits = 32, |
| .val_bits = 32, |
| .reg_stride = 4, |
| .max_register = APB_EHB_TIMEOUT, |
| .fast_io = true |
| }; |
| |
| static inline unsigned long bt1_apb_n_to_timeout_us(struct bt1_apb *apb, u32 n) |
| { |
| u64 timeout = (u64)n * USEC_PER_SEC; |
| |
| do_div(timeout, apb->rate); |
| |
| return timeout; |
| |
| } |
| |
| static inline unsigned long bt1_apb_timeout_to_n_us(struct bt1_apb *apb, |
| unsigned long timeout) |
| { |
| u64 n = (u64)timeout * apb->rate; |
| |
| do_div(n, USEC_PER_SEC); |
| |
| return n; |
| |
| } |
| |
| static irqreturn_t bt1_apb_isr(int irq, void *data) |
| { |
| struct bt1_apb *apb = data; |
| u32 addr = 0; |
| |
| regmap_read(apb->regs, APB_EHB_ADDR, &addr); |
| |
| dev_crit_ratelimited(apb->dev, |
| "APB-bus fault %d: Slave access timeout at 0x%08x\n", |
| atomic_inc_return(&apb->count), |
| addr); |
| |
| /* |
| * Print backtrace on each CPU. This might be pointless if the fault |
| * has happened on the same CPU as the IRQ handler is executed or |
| * the other core proceeded further execution despite the error. |
| * But if it's not, by looking at the trace we would get straight to |
| * the cause of the problem. |
| */ |
| trigger_all_cpu_backtrace(); |
| |
| regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void bt1_apb_clear_data(void *data) |
| { |
| struct bt1_apb *apb = data; |
| struct platform_device *pdev = to_platform_device(apb->dev); |
| |
| platform_set_drvdata(pdev, NULL); |
| } |
| |
| static struct bt1_apb *bt1_apb_create_data(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct bt1_apb *apb; |
| int ret; |
| |
| apb = devm_kzalloc(dev, sizeof(*apb), GFP_KERNEL); |
| if (!apb) |
| return ERR_PTR(-ENOMEM); |
| |
| ret = devm_add_action(dev, bt1_apb_clear_data, apb); |
| if (ret) { |
| dev_err(dev, "Can't add APB EHB data clear action\n"); |
| return ERR_PTR(ret); |
| } |
| |
| apb->dev = dev; |
| atomic_set(&apb->count, 0); |
| platform_set_drvdata(pdev, apb); |
| |
| return apb; |
| } |
| |
| static int bt1_apb_request_regs(struct bt1_apb *apb) |
| { |
| struct platform_device *pdev = to_platform_device(apb->dev); |
| void __iomem *regs; |
| |
| regs = devm_platform_ioremap_resource_byname(pdev, "ehb"); |
| if (IS_ERR(regs)) { |
| dev_err(apb->dev, "Couldn't map APB EHB registers\n"); |
| return PTR_ERR(regs); |
| } |
| |
| apb->regs = devm_regmap_init_mmio(apb->dev, regs, &bt1_apb_regmap_cfg); |
| if (IS_ERR(apb->regs)) { |
| dev_err(apb->dev, "Couldn't create APB EHB regmap\n"); |
| return PTR_ERR(apb->regs); |
| } |
| |
| apb->res = devm_platform_ioremap_resource_byname(pdev, "nodev"); |
| if (IS_ERR(apb->res)) |
| dev_err(apb->dev, "Couldn't map reserved region\n"); |
| |
| return PTR_ERR_OR_ZERO(apb->res); |
| } |
| |
| static int bt1_apb_request_rst(struct bt1_apb *apb) |
| { |
| int ret; |
| |
| apb->prst = devm_reset_control_get_optional_exclusive(apb->dev, "prst"); |
| if (IS_ERR(apb->prst)) |
| return dev_err_probe(apb->dev, PTR_ERR(apb->prst), |
| "Couldn't get reset control line\n"); |
| |
| ret = reset_control_deassert(apb->prst); |
| if (ret) |
| dev_err(apb->dev, "Failed to deassert the reset line\n"); |
| |
| return ret; |
| } |
| |
| static int bt1_apb_request_clk(struct bt1_apb *apb) |
| { |
| apb->pclk = devm_clk_get_enabled(apb->dev, "pclk"); |
| if (IS_ERR(apb->pclk)) |
| return dev_err_probe(apb->dev, PTR_ERR(apb->pclk), |
| "Couldn't get APB clock descriptor\n"); |
| |
| apb->rate = clk_get_rate(apb->pclk); |
| if (!apb->rate) { |
| dev_err(apb->dev, "Invalid clock rate\n"); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static void bt1_apb_clear_irq(void *data) |
| { |
| struct bt1_apb *apb = data; |
| |
| regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_MASK, 0); |
| } |
| |
| static int bt1_apb_request_irq(struct bt1_apb *apb) |
| { |
| struct platform_device *pdev = to_platform_device(apb->dev); |
| int ret; |
| |
| apb->irq = platform_get_irq(pdev, 0); |
| if (apb->irq < 0) |
| return apb->irq; |
| |
| ret = devm_request_irq(apb->dev, apb->irq, bt1_apb_isr, IRQF_SHARED, |
| "bt1-apb", apb); |
| if (ret) { |
| dev_err(apb->dev, "Couldn't request APB EHB IRQ\n"); |
| return ret; |
| } |
| |
| ret = devm_add_action(apb->dev, bt1_apb_clear_irq, apb); |
| if (ret) { |
| dev_err(apb->dev, "Can't add APB EHB IRQs clear action\n"); |
| return ret; |
| } |
| |
| /* Unmask IRQ and clear it' pending flag. */ |
| regmap_update_bits(apb->regs, APB_EHB_ISR, |
| APB_EHB_ISR_PENDING | APB_EHB_ISR_MASK, |
| APB_EHB_ISR_MASK); |
| |
| return 0; |
| } |
| |
| static ssize_t count_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct bt1_apb *apb = dev_get_drvdata(dev); |
| |
| return scnprintf(buf, PAGE_SIZE, "%d\n", atomic_read(&apb->count)); |
| } |
| static DEVICE_ATTR_RO(count); |
| |
| static ssize_t timeout_show(struct device *dev, struct device_attribute *attr, |
| char *buf) |
| { |
| struct bt1_apb *apb = dev_get_drvdata(dev); |
| unsigned long timeout; |
| int ret; |
| u32 n; |
| |
| ret = regmap_read(apb->regs, APB_EHB_TIMEOUT, &n); |
| if (ret) |
| return ret; |
| |
| timeout = bt1_apb_n_to_timeout_us(apb, n); |
| |
| return scnprintf(buf, PAGE_SIZE, "%lu\n", timeout); |
| } |
| |
| static ssize_t timeout_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *buf, size_t count) |
| { |
| struct bt1_apb *apb = dev_get_drvdata(dev); |
| unsigned long timeout; |
| int ret; |
| u32 n; |
| |
| if (kstrtoul(buf, 0, &timeout) < 0) |
| return -EINVAL; |
| |
| n = bt1_apb_timeout_to_n_us(apb, timeout); |
| n = clamp(n, APB_EHB_TIMEOUT_MIN, APB_EHB_TIMEOUT_MAX); |
| |
| ret = regmap_write(apb->regs, APB_EHB_TIMEOUT, n); |
| |
| return ret ?: count; |
| } |
| static DEVICE_ATTR_RW(timeout); |
| |
| static ssize_t inject_error_show(struct device *dev, |
| struct device_attribute *attr, char *buf) |
| { |
| return scnprintf(buf, PAGE_SIZE, "Error injection: nodev irq\n"); |
| } |
| |
| static ssize_t inject_error_store(struct device *dev, |
| struct device_attribute *attr, |
| const char *data, size_t count) |
| { |
| struct bt1_apb *apb = dev_get_drvdata(dev); |
| |
| /* |
| * Either dummy read from the unmapped address in the APB IO area |
| * or manually set the IRQ status. |
| */ |
| if (sysfs_streq(data, "nodev")) |
| readl(apb->res); |
| else if (sysfs_streq(data, "irq")) |
| regmap_update_bits(apb->regs, APB_EHB_ISR, APB_EHB_ISR_PENDING, |
| APB_EHB_ISR_PENDING); |
| else |
| return -EINVAL; |
| |
| return count; |
| } |
| static DEVICE_ATTR_RW(inject_error); |
| |
| static struct attribute *bt1_apb_sysfs_attrs[] = { |
| &dev_attr_count.attr, |
| &dev_attr_timeout.attr, |
| &dev_attr_inject_error.attr, |
| NULL |
| }; |
| ATTRIBUTE_GROUPS(bt1_apb_sysfs); |
| |
| static void bt1_apb_remove_sysfs(void *data) |
| { |
| struct bt1_apb *apb = data; |
| |
| device_remove_groups(apb->dev, bt1_apb_sysfs_groups); |
| } |
| |
| static int bt1_apb_init_sysfs(struct bt1_apb *apb) |
| { |
| int ret; |
| |
| ret = device_add_groups(apb->dev, bt1_apb_sysfs_groups); |
| if (ret) { |
| dev_err(apb->dev, "Failed to create EHB APB sysfs nodes\n"); |
| return ret; |
| } |
| |
| ret = devm_add_action_or_reset(apb->dev, bt1_apb_remove_sysfs, apb); |
| if (ret) |
| dev_err(apb->dev, "Can't add APB EHB sysfs remove action\n"); |
| |
| return ret; |
| } |
| |
| static int bt1_apb_probe(struct platform_device *pdev) |
| { |
| struct bt1_apb *apb; |
| int ret; |
| |
| apb = bt1_apb_create_data(pdev); |
| if (IS_ERR(apb)) |
| return PTR_ERR(apb); |
| |
| ret = bt1_apb_request_regs(apb); |
| if (ret) |
| return ret; |
| |
| ret = bt1_apb_request_rst(apb); |
| if (ret) |
| return ret; |
| |
| ret = bt1_apb_request_clk(apb); |
| if (ret) |
| return ret; |
| |
| ret = bt1_apb_request_irq(apb); |
| if (ret) |
| return ret; |
| |
| ret = bt1_apb_init_sysfs(apb); |
| if (ret) |
| return ret; |
| |
| return 0; |
| } |
| |
| static const struct of_device_id bt1_apb_of_match[] = { |
| { .compatible = "baikal,bt1-apb" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, bt1_apb_of_match); |
| |
| static struct platform_driver bt1_apb_driver = { |
| .probe = bt1_apb_probe, |
| .driver = { |
| .name = "bt1-apb", |
| .of_match_table = bt1_apb_of_match |
| } |
| }; |
| module_platform_driver(bt1_apb_driver); |
| |
| MODULE_AUTHOR("Serge Semin <Sergey.Semin@baikalelectronics.ru>"); |
| MODULE_DESCRIPTION("Baikal-T1 APB-bus driver"); |