| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * PowerPC 4xx Clock and Power Management |
| * |
| * Copyright (C) 2010, Applied Micro Circuits Corporation |
| * Victor Gallardo (vgallardo@apm.com) |
| * |
| * Based on arch/powerpc/platforms/44x/idle.c: |
| * Jerone Young <jyoung5@us.ibm.com> |
| * Copyright 2008 IBM Corp. |
| * |
| * Based on arch/powerpc/sysdev/fsl_pmc.c: |
| * Anton Vorontsov <avorontsov@ru.mvista.com> |
| * Copyright 2009 MontaVista Software, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/of.h> |
| #include <linux/sysfs.h> |
| #include <linux/cpu.h> |
| #include <linux/suspend.h> |
| #include <asm/dcr.h> |
| #include <asm/dcr-native.h> |
| #include <asm/machdep.h> |
| |
| #define CPM_ER 0 |
| #define CPM_FR 1 |
| #define CPM_SR 2 |
| |
| #define CPM_IDLE_WAIT 0 |
| #define CPM_IDLE_DOZE 1 |
| |
| struct cpm { |
| dcr_host_t dcr_host; |
| unsigned int dcr_offset[3]; |
| unsigned int powersave_off; |
| unsigned int unused; |
| unsigned int idle_doze; |
| unsigned int standby; |
| unsigned int suspend; |
| }; |
| |
| static struct cpm cpm; |
| |
| struct cpm_idle_mode { |
| unsigned int enabled; |
| const char *name; |
| }; |
| |
| static struct cpm_idle_mode idle_mode[] = { |
| [CPM_IDLE_WAIT] = { 1, "wait" }, /* default */ |
| [CPM_IDLE_DOZE] = { 0, "doze" }, |
| }; |
| |
| static unsigned int cpm_set(unsigned int cpm_reg, unsigned int mask) |
| { |
| unsigned int value; |
| |
| /* CPM controller supports 3 different types of sleep interface |
| * known as class 1, 2 and 3. For class 1 units, they are |
| * unconditionally put to sleep when the corresponding CPM bit is |
| * set. For class 2 and 3 units this is not case; if they can be |
| * put to sleep, they will. Here we do not verify, we just |
| * set them and expect them to eventually go off when they can. |
| */ |
| value = dcr_read(cpm.dcr_host, cpm.dcr_offset[cpm_reg]); |
| dcr_write(cpm.dcr_host, cpm.dcr_offset[cpm_reg], value | mask); |
| |
| /* return old state, to restore later if needed */ |
| return value; |
| } |
| |
| static void cpm_idle_wait(void) |
| { |
| unsigned long msr_save; |
| |
| /* save off initial state */ |
| msr_save = mfmsr(); |
| /* sync required when CPM0_ER[CPU] is set */ |
| mb(); |
| /* set wait state MSR */ |
| mtmsr(msr_save|MSR_WE|MSR_EE|MSR_CE|MSR_DE); |
| isync(); |
| /* return to initial state */ |
| mtmsr(msr_save); |
| isync(); |
| } |
| |
| static void cpm_idle_sleep(unsigned int mask) |
| { |
| unsigned int er_save; |
| |
| /* update CPM_ER state */ |
| er_save = cpm_set(CPM_ER, mask); |
| |
| /* go to wait state so that CPM0_ER[CPU] can take effect */ |
| cpm_idle_wait(); |
| |
| /* restore CPM_ER state */ |
| dcr_write(cpm.dcr_host, cpm.dcr_offset[CPM_ER], er_save); |
| } |
| |
| static void cpm_idle_doze(void) |
| { |
| cpm_idle_sleep(cpm.idle_doze); |
| } |
| |
| static void cpm_idle_config(int mode) |
| { |
| int i; |
| |
| if (idle_mode[mode].enabled) |
| return; |
| |
| for (i = 0; i < ARRAY_SIZE(idle_mode); i++) |
| idle_mode[i].enabled = 0; |
| |
| idle_mode[mode].enabled = 1; |
| } |
| |
| static ssize_t cpm_idle_show(struct kobject *kobj, |
| struct kobj_attribute *attr, char *buf) |
| { |
| char *s = buf; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(idle_mode); i++) { |
| if (idle_mode[i].enabled) |
| s += sprintf(s, "[%s] ", idle_mode[i].name); |
| else |
| s += sprintf(s, "%s ", idle_mode[i].name); |
| } |
| |
| *(s-1) = '\n'; /* convert the last space to a newline */ |
| |
| return s - buf; |
| } |
| |
| static ssize_t cpm_idle_store(struct kobject *kobj, |
| struct kobj_attribute *attr, |
| const char *buf, size_t n) |
| { |
| int i; |
| char *p; |
| int len; |
| |
| p = memchr(buf, '\n', n); |
| len = p ? p - buf : n; |
| |
| for (i = 0; i < ARRAY_SIZE(idle_mode); i++) { |
| if (strncmp(buf, idle_mode[i].name, len) == 0) { |
| cpm_idle_config(i); |
| return n; |
| } |
| } |
| |
| return -EINVAL; |
| } |
| |
| static struct kobj_attribute cpm_idle_attr = |
| __ATTR(idle, 0644, cpm_idle_show, cpm_idle_store); |
| |
| static void __init cpm_idle_config_sysfs(void) |
| { |
| struct device *dev; |
| unsigned long ret; |
| |
| dev = get_cpu_device(0); |
| |
| ret = sysfs_create_file(&dev->kobj, |
| &cpm_idle_attr.attr); |
| if (ret) |
| printk(KERN_WARNING |
| "cpm: failed to create idle sysfs entry\n"); |
| } |
| |
| static void cpm_idle(void) |
| { |
| if (idle_mode[CPM_IDLE_DOZE].enabled) |
| cpm_idle_doze(); |
| else |
| cpm_idle_wait(); |
| } |
| |
| static int cpm_suspend_valid(suspend_state_t state) |
| { |
| switch (state) { |
| case PM_SUSPEND_STANDBY: |
| return !!cpm.standby; |
| case PM_SUSPEND_MEM: |
| return !!cpm.suspend; |
| default: |
| return 0; |
| } |
| } |
| |
| static void cpm_suspend_standby(unsigned int mask) |
| { |
| unsigned long tcr_save; |
| |
| /* disable decrement interrupt */ |
| tcr_save = mfspr(SPRN_TCR); |
| mtspr(SPRN_TCR, tcr_save & ~TCR_DIE); |
| |
| /* go to sleep state */ |
| cpm_idle_sleep(mask); |
| |
| /* restore decrement interrupt */ |
| mtspr(SPRN_TCR, tcr_save); |
| } |
| |
| static int cpm_suspend_enter(suspend_state_t state) |
| { |
| switch (state) { |
| case PM_SUSPEND_STANDBY: |
| cpm_suspend_standby(cpm.standby); |
| break; |
| case PM_SUSPEND_MEM: |
| cpm_suspend_standby(cpm.suspend); |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static const struct platform_suspend_ops cpm_suspend_ops = { |
| .valid = cpm_suspend_valid, |
| .enter = cpm_suspend_enter, |
| }; |
| |
| static int __init cpm_get_uint_property(struct device_node *np, |
| const char *name) |
| { |
| int len; |
| const unsigned int *prop = of_get_property(np, name, &len); |
| |
| if (prop == NULL || len < sizeof(u32)) |
| return 0; |
| |
| return *prop; |
| } |
| |
| static int __init cpm_init(void) |
| { |
| struct device_node *np; |
| int dcr_base, dcr_len; |
| int ret = 0; |
| |
| if (!cpm.powersave_off) { |
| cpm_idle_config(CPM_IDLE_WAIT); |
| ppc_md.power_save = &cpm_idle; |
| } |
| |
| np = of_find_compatible_node(NULL, NULL, "ibm,cpm"); |
| if (!np) { |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| dcr_base = dcr_resource_start(np, 0); |
| dcr_len = dcr_resource_len(np, 0); |
| |
| if (dcr_base == 0 || dcr_len == 0) { |
| printk(KERN_ERR "cpm: could not parse dcr property for %pOF\n", |
| np); |
| ret = -EINVAL; |
| goto node_put; |
| } |
| |
| cpm.dcr_host = dcr_map(np, dcr_base, dcr_len); |
| |
| if (!DCR_MAP_OK(cpm.dcr_host)) { |
| printk(KERN_ERR "cpm: failed to map dcr property for %pOF\n", |
| np); |
| ret = -EINVAL; |
| goto node_put; |
| } |
| |
| /* All 4xx SoCs with a CPM controller have one of two |
| * different order for the CPM registers. Some have the |
| * CPM registers in the following order (ER,FR,SR). The |
| * others have them in the following order (SR,ER,FR). |
| */ |
| |
| if (cpm_get_uint_property(np, "er-offset") == 0) { |
| cpm.dcr_offset[CPM_ER] = 0; |
| cpm.dcr_offset[CPM_FR] = 1; |
| cpm.dcr_offset[CPM_SR] = 2; |
| } else { |
| cpm.dcr_offset[CPM_ER] = 1; |
| cpm.dcr_offset[CPM_FR] = 2; |
| cpm.dcr_offset[CPM_SR] = 0; |
| } |
| |
| /* Now let's see what IPs to turn off for the following modes */ |
| |
| cpm.unused = cpm_get_uint_property(np, "unused-units"); |
| cpm.idle_doze = cpm_get_uint_property(np, "idle-doze"); |
| cpm.standby = cpm_get_uint_property(np, "standby"); |
| cpm.suspend = cpm_get_uint_property(np, "suspend"); |
| |
| /* If some IPs are unused let's turn them off now */ |
| |
| if (cpm.unused) { |
| cpm_set(CPM_ER, cpm.unused); |
| cpm_set(CPM_FR, cpm.unused); |
| } |
| |
| /* Now let's export interfaces */ |
| |
| if (!cpm.powersave_off && cpm.idle_doze) |
| cpm_idle_config_sysfs(); |
| |
| if (cpm.standby || cpm.suspend) |
| suspend_set_ops(&cpm_suspend_ops); |
| node_put: |
| of_node_put(np); |
| out: |
| return ret; |
| } |
| |
| late_initcall(cpm_init); |
| |
| static int __init cpm_powersave_off(char *arg) |
| { |
| cpm.powersave_off = 1; |
| return 1; |
| } |
| __setup("powersave=off", cpm_powersave_off); |