| // SPDX-License-Identifier: GPL-2.0-or-later |
| // Copyright 2020 Cerno |
| |
| #include <linux/clk-provider.h> |
| #include <linux/module.h> |
| #include <linux/platform_device.h> |
| #include <linux/reset-controller.h> |
| #include <linux/reset/reset-simple.h> |
| |
| #define DVP_HT_RPI_SW_INIT 0x04 |
| #define DVP_HT_RPI_MISC_CONFIG 0x08 |
| |
| #define NR_CLOCKS 2 |
| #define NR_RESETS 6 |
| |
| struct clk_dvp { |
| struct clk_hw_onecell_data *data; |
| struct reset_simple_data reset; |
| }; |
| |
| static const struct clk_parent_data clk_dvp_parent = { |
| .index = 0, |
| }; |
| |
| static int clk_dvp_probe(struct platform_device *pdev) |
| { |
| struct clk_hw_onecell_data *data; |
| struct clk_dvp *dvp; |
| void __iomem *base; |
| int ret; |
| |
| dvp = devm_kzalloc(&pdev->dev, sizeof(*dvp), GFP_KERNEL); |
| if (!dvp) |
| return -ENOMEM; |
| platform_set_drvdata(pdev, dvp); |
| |
| dvp->data = devm_kzalloc(&pdev->dev, |
| struct_size(dvp->data, hws, NR_CLOCKS), |
| GFP_KERNEL); |
| if (!dvp->data) |
| return -ENOMEM; |
| data = dvp->data; |
| |
| base = devm_platform_ioremap_resource(pdev, 0); |
| if (IS_ERR(base)) |
| return PTR_ERR(base); |
| |
| dvp->reset.rcdev.owner = THIS_MODULE; |
| dvp->reset.rcdev.nr_resets = NR_RESETS; |
| dvp->reset.rcdev.ops = &reset_simple_ops; |
| dvp->reset.rcdev.of_node = pdev->dev.of_node; |
| dvp->reset.membase = base + DVP_HT_RPI_SW_INIT; |
| spin_lock_init(&dvp->reset.lock); |
| |
| ret = devm_reset_controller_register(&pdev->dev, &dvp->reset.rcdev); |
| if (ret) |
| return ret; |
| |
| data->num = NR_CLOCKS; |
| |
| data->hws[0] = clk_hw_register_gate_parent_data(&pdev->dev, |
| "hdmi0-108MHz", |
| &clk_dvp_parent, 0, |
| base + DVP_HT_RPI_MISC_CONFIG, 3, |
| CLK_GATE_SET_TO_DISABLE, |
| &dvp->reset.lock); |
| if (IS_ERR(data->hws[0])) |
| return PTR_ERR(data->hws[0]); |
| |
| data->hws[1] = clk_hw_register_gate_parent_data(&pdev->dev, |
| "hdmi1-108MHz", |
| &clk_dvp_parent, 0, |
| base + DVP_HT_RPI_MISC_CONFIG, 4, |
| CLK_GATE_SET_TO_DISABLE, |
| &dvp->reset.lock); |
| if (IS_ERR(data->hws[1])) { |
| ret = PTR_ERR(data->hws[1]); |
| goto unregister_clk0; |
| } |
| |
| ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get, |
| data); |
| if (ret) |
| goto unregister_clk1; |
| |
| return 0; |
| |
| unregister_clk1: |
| clk_hw_unregister_gate(data->hws[1]); |
| |
| unregister_clk0: |
| clk_hw_unregister_gate(data->hws[0]); |
| return ret; |
| }; |
| |
| static void clk_dvp_remove(struct platform_device *pdev) |
| { |
| struct clk_dvp *dvp = platform_get_drvdata(pdev); |
| struct clk_hw_onecell_data *data = dvp->data; |
| |
| clk_hw_unregister_gate(data->hws[1]); |
| clk_hw_unregister_gate(data->hws[0]); |
| } |
| |
| static const struct of_device_id clk_dvp_dt_ids[] = { |
| { .compatible = "brcm,brcm2711-dvp", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, clk_dvp_dt_ids); |
| |
| static struct platform_driver clk_dvp_driver = { |
| .probe = clk_dvp_probe, |
| .remove = clk_dvp_remove, |
| .driver = { |
| .name = "brcm2711-dvp", |
| .of_match_table = clk_dvp_dt_ids, |
| }, |
| }; |
| module_platform_driver(clk_dvp_driver); |
| |
| MODULE_AUTHOR("Maxime Ripard <maxime@cerno.tech>"); |
| MODULE_DESCRIPTION("BCM2711 DVP clock driver"); |
| MODULE_LICENSE("GPL"); |