| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Samsung LSI S5C73M3 8M pixel camera driver |
| * |
| * Copyright (C) 2012, Samsung Electronics, Co., Ltd. |
| * Sylwester Nawrocki <s.nawrocki@samsung.com> |
| * Andrzej Hajda <a.hajda@samsung.com> |
| */ |
| |
| #include <linux/sizes.h> |
| #include <linux/delay.h> |
| #include <linux/init.h> |
| #include <linux/media.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/spi/spi.h> |
| |
| #include "s5c73m3.h" |
| |
| #define S5C73M3_SPI_DRV_NAME "S5C73M3-SPI" |
| |
| static const struct of_device_id s5c73m3_spi_ids[] = { |
| { .compatible = "samsung,s5c73m3" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(of, s5c73m3_spi_ids); |
| |
| enum spi_direction { |
| SPI_DIR_RX, |
| SPI_DIR_TX |
| }; |
| |
| static int spi_xmit(struct spi_device *spi_dev, void *addr, const int len, |
| enum spi_direction dir) |
| { |
| struct spi_message msg; |
| int r; |
| struct spi_transfer xfer = { |
| .len = len, |
| }; |
| |
| if (dir == SPI_DIR_TX) |
| xfer.tx_buf = addr; |
| else |
| xfer.rx_buf = addr; |
| |
| if (spi_dev == NULL) { |
| pr_err("SPI device is uninitialized\n"); |
| return -ENODEV; |
| } |
| |
| spi_message_init(&msg); |
| spi_message_add_tail(&xfer, &msg); |
| |
| r = spi_sync(spi_dev, &msg); |
| if (r < 0) |
| dev_err(&spi_dev->dev, "%s spi_sync failed %d\n", __func__, r); |
| |
| return r; |
| } |
| |
| int s5c73m3_spi_write(struct s5c73m3 *state, const void *addr, |
| const unsigned int len, const unsigned int tx_size) |
| { |
| struct spi_device *spi_dev = state->spi_dev; |
| u32 count = len / tx_size; |
| u32 extra = len % tx_size; |
| unsigned int i, j = 0; |
| u8 padding[32]; |
| int r = 0; |
| |
| memset(padding, 0, sizeof(padding)); |
| |
| for (i = 0; i < count; i++) { |
| r = spi_xmit(spi_dev, (void *)addr + j, tx_size, SPI_DIR_TX); |
| if (r < 0) |
| return r; |
| j += tx_size; |
| } |
| |
| if (extra > 0) { |
| r = spi_xmit(spi_dev, (void *)addr + j, extra, SPI_DIR_TX); |
| if (r < 0) |
| return r; |
| } |
| |
| return spi_xmit(spi_dev, padding, sizeof(padding), SPI_DIR_TX); |
| } |
| |
| int s5c73m3_spi_read(struct s5c73m3 *state, void *addr, |
| const unsigned int len, const unsigned int tx_size) |
| { |
| struct spi_device *spi_dev = state->spi_dev; |
| u32 count = len / tx_size; |
| u32 extra = len % tx_size; |
| unsigned int i, j = 0; |
| int r = 0; |
| |
| for (i = 0; i < count; i++) { |
| r = spi_xmit(spi_dev, addr + j, tx_size, SPI_DIR_RX); |
| if (r < 0) |
| return r; |
| j += tx_size; |
| } |
| |
| if (extra > 0) |
| return spi_xmit(spi_dev, addr + j, extra, SPI_DIR_RX); |
| |
| return 0; |
| } |
| |
| static int s5c73m3_spi_probe(struct spi_device *spi) |
| { |
| int r; |
| struct s5c73m3 *state = container_of(spi->dev.driver, struct s5c73m3, |
| spidrv.driver); |
| spi->bits_per_word = 32; |
| |
| r = spi_setup(spi); |
| if (r < 0) { |
| dev_err(&spi->dev, "spi_setup() failed\n"); |
| return r; |
| } |
| |
| mutex_lock(&state->lock); |
| state->spi_dev = spi; |
| mutex_unlock(&state->lock); |
| |
| v4l2_info(&state->sensor_sd, "S5C73M3 SPI probed successfully\n"); |
| return 0; |
| } |
| |
| int s5c73m3_register_spi_driver(struct s5c73m3 *state) |
| { |
| struct spi_driver *spidrv = &state->spidrv; |
| |
| spidrv->probe = s5c73m3_spi_probe; |
| spidrv->driver.name = S5C73M3_SPI_DRV_NAME; |
| spidrv->driver.of_match_table = s5c73m3_spi_ids; |
| |
| return spi_register_driver(spidrv); |
| } |
| |
| void s5c73m3_unregister_spi_driver(struct s5c73m3 *state) |
| { |
| spi_unregister_driver(&state->spidrv); |
| } |