| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * camss-vfe.h |
| * |
| * Qualcomm MSM Camera Subsystem - VFE (Video Front End) Module |
| * |
| * Copyright (c) 2013-2015, The Linux Foundation. All rights reserved. |
| * Copyright (C) 2015-2018 Linaro Ltd. |
| */ |
| #ifndef QC_MSM_CAMSS_VFE_H |
| #define QC_MSM_CAMSS_VFE_H |
| |
| #include <linux/clk.h> |
| #include <linux/spinlock_types.h> |
| #include <media/media-entity.h> |
| #include <media/v4l2-device.h> |
| #include <media/v4l2-subdev.h> |
| |
| #include "camss-video.h" |
| #include "camss-vfe-gen1.h" |
| |
| #define MSM_VFE_PAD_SINK 0 |
| #define MSM_VFE_PAD_SRC 1 |
| #define MSM_VFE_PADS_NUM 2 |
| |
| #define MSM_VFE_IMAGE_MASTERS_NUM 7 |
| #define MSM_VFE_COMPOSITE_IRQ_NUM 4 |
| |
| /* VFE halt timeout */ |
| #define VFE_HALT_TIMEOUT_MS 100 |
| /* Frame drop value. VAL + UPDATES - 1 should not exceed 31 */ |
| #define VFE_FRAME_DROP_VAL 30 |
| |
| #define vfe_line_array(ptr_line) \ |
| ((const struct vfe_line (*)[]) &(ptr_line)[-(ptr_line)->id]) |
| |
| #define to_vfe(ptr_line) \ |
| container_of(vfe_line_array(ptr_line), struct vfe_device, line) |
| |
| enum vfe_output_state { |
| VFE_OUTPUT_OFF, |
| VFE_OUTPUT_RESERVED, |
| VFE_OUTPUT_SINGLE, |
| VFE_OUTPUT_CONTINUOUS, |
| VFE_OUTPUT_IDLE, |
| VFE_OUTPUT_STOPPING, |
| VFE_OUTPUT_ON, |
| }; |
| |
| enum vfe_line_id { |
| VFE_LINE_NONE = -1, |
| VFE_LINE_RDI0 = 0, |
| VFE_LINE_RDI1 = 1, |
| VFE_LINE_RDI2 = 2, |
| VFE_LINE_PIX = 3, |
| VFE_LINE_NUM_MAX = 4 |
| }; |
| |
| struct vfe_output { |
| u8 wm_num; |
| u8 wm_idx[3]; |
| |
| struct camss_buffer *buf[2]; |
| struct camss_buffer *last_buffer; |
| struct list_head pending_bufs; |
| |
| unsigned int drop_update_idx; |
| |
| union { |
| struct { |
| int active_buf; |
| int wait_sof; |
| } gen1; |
| struct { |
| int active_num; |
| } gen2; |
| }; |
| enum vfe_output_state state; |
| unsigned int sequence; |
| |
| int wait_reg_update; |
| struct completion sof; |
| struct completion reg_update; |
| }; |
| |
| struct vfe_line { |
| enum vfe_line_id id; |
| struct v4l2_subdev subdev; |
| struct media_pad pads[MSM_VFE_PADS_NUM]; |
| struct v4l2_mbus_framefmt fmt[MSM_VFE_PADS_NUM]; |
| struct v4l2_rect compose; |
| struct v4l2_rect crop; |
| struct camss_video video_out; |
| struct vfe_output output; |
| const struct camss_format_info *formats; |
| unsigned int nformats; |
| }; |
| |
| struct vfe_device; |
| |
| struct vfe_hw_ops { |
| void (*enable_irq_common)(struct vfe_device *vfe); |
| void (*global_reset)(struct vfe_device *vfe); |
| u32 (*hw_version)(struct vfe_device *vfe); |
| irqreturn_t (*isr)(int irq, void *dev); |
| void (*isr_read)(struct vfe_device *vfe, u32 *value0, u32 *value1); |
| void (*pm_domain_off)(struct vfe_device *vfe); |
| int (*pm_domain_on)(struct vfe_device *vfe); |
| void (*reg_update)(struct vfe_device *vfe, enum vfe_line_id line_id); |
| void (*reg_update_clear)(struct vfe_device *vfe, |
| enum vfe_line_id line_id); |
| void (*subdev_init)(struct device *dev, struct vfe_device *vfe); |
| int (*vfe_disable)(struct vfe_line *line); |
| int (*vfe_enable)(struct vfe_line *line); |
| int (*vfe_halt)(struct vfe_device *vfe); |
| void (*violation_read)(struct vfe_device *vfe); |
| void (*vfe_wm_stop)(struct vfe_device *vfe, u8 wm); |
| }; |
| |
| struct vfe_isr_ops { |
| void (*reset_ack)(struct vfe_device *vfe); |
| void (*halt_ack)(struct vfe_device *vfe); |
| void (*reg_update)(struct vfe_device *vfe, enum vfe_line_id line_id); |
| void (*sof)(struct vfe_device *vfe, enum vfe_line_id line_id); |
| void (*comp_done)(struct vfe_device *vfe, u8 comp); |
| void (*wm_done)(struct vfe_device *vfe, u8 wm); |
| }; |
| |
| struct vfe_subdev_resources { |
| bool is_lite; |
| u8 line_num; |
| bool has_pd; |
| char *pd_name; |
| const struct vfe_hw_ops *hw_ops; |
| const struct camss_formats *formats_rdi; |
| const struct camss_formats *formats_pix; |
| }; |
| |
| struct vfe_device { |
| struct camss *camss; |
| u8 id; |
| void __iomem *base; |
| u32 irq; |
| char irq_name[30]; |
| struct camss_clock *clock; |
| int nclocks; |
| struct completion reset_complete; |
| struct completion halt_complete; |
| struct mutex power_lock; |
| int power_count; |
| struct mutex stream_lock; |
| int stream_count; |
| spinlock_t output_lock; |
| enum vfe_line_id wm_output_map[MSM_VFE_IMAGE_MASTERS_NUM]; |
| struct vfe_line line[VFE_LINE_NUM_MAX]; |
| u32 reg_update; |
| u8 was_streaming; |
| const struct vfe_subdev_resources *res; |
| const struct vfe_hw_ops_gen1 *ops_gen1; |
| struct vfe_isr_ops isr_ops; |
| struct camss_video_ops video_ops; |
| struct device *genpd; |
| struct device_link *genpd_link; |
| }; |
| |
| struct camss_subdev_resources; |
| |
| int msm_vfe_subdev_init(struct camss *camss, struct vfe_device *vfe, |
| const struct camss_subdev_resources *res, u8 id); |
| |
| void msm_vfe_genpd_cleanup(struct vfe_device *vfe); |
| |
| int msm_vfe_register_entities(struct vfe_device *vfe, |
| struct v4l2_device *v4l2_dev); |
| |
| void msm_vfe_unregister_entities(struct vfe_device *vfe); |
| |
| /* |
| * vfe_buf_add_pending - Add output buffer to list of pending |
| * @output: VFE output |
| * @buffer: Video buffer |
| */ |
| void vfe_buf_add_pending(struct vfe_output *output, struct camss_buffer *buffer); |
| |
| struct camss_buffer *vfe_buf_get_pending(struct vfe_output *output); |
| |
| int vfe_flush_buffers(struct camss_video *vid, enum vb2_buffer_state state); |
| |
| /* |
| * vfe_isr_comp_done - Process composite image done interrupt |
| * @vfe: VFE Device |
| * @comp: Composite image id |
| */ |
| void vfe_isr_comp_done(struct vfe_device *vfe, u8 comp); |
| |
| void vfe_isr_reset_ack(struct vfe_device *vfe); |
| int vfe_put_output(struct vfe_line *line); |
| int vfe_release_wm(struct vfe_device *vfe, u8 wm); |
| int vfe_reserve_wm(struct vfe_device *vfe, enum vfe_line_id line_id); |
| |
| /* |
| * vfe_reset - Trigger reset on VFE module and wait to complete |
| * @vfe: VFE device |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| int vfe_reset(struct vfe_device *vfe); |
| |
| /* |
| * vfe_disable - Disable streaming on VFE line |
| * @line: VFE line |
| * |
| * Return 0 on success or a negative error code otherwise |
| */ |
| int vfe_disable(struct vfe_line *line); |
| |
| /* |
| * vfe_pm_domain_off - Disable power domains specific to this VFE. |
| * @vfe: VFE Device |
| */ |
| void vfe_pm_domain_off(struct vfe_device *vfe); |
| |
| /* |
| * vfe_pm_domain_on - Enable power domains specific to this VFE. |
| * @vfe: VFE Device |
| */ |
| int vfe_pm_domain_on(struct vfe_device *vfe); |
| |
| extern const struct camss_formats vfe_formats_rdi_8x16; |
| extern const struct camss_formats vfe_formats_pix_8x16; |
| extern const struct camss_formats vfe_formats_rdi_8x96; |
| extern const struct camss_formats vfe_formats_pix_8x96; |
| extern const struct camss_formats vfe_formats_rdi_845; |
| extern const struct camss_formats vfe_formats_pix_845; |
| |
| extern const struct vfe_hw_ops vfe_ops_4_1; |
| extern const struct vfe_hw_ops vfe_ops_4_7; |
| extern const struct vfe_hw_ops vfe_ops_4_8; |
| extern const struct vfe_hw_ops vfe_ops_170; |
| extern const struct vfe_hw_ops vfe_ops_480; |
| |
| int vfe_get(struct vfe_device *vfe); |
| void vfe_put(struct vfe_device *vfe); |
| |
| /* |
| * vfe_is_lite - Return if VFE is VFE lite. |
| * @vfe: VFE Device |
| * |
| * Some VFE lites have a different register layout. |
| * |
| * Return whether VFE is VFE lite |
| */ |
| bool vfe_is_lite(struct vfe_device *vfe); |
| |
| #endif /* QC_MSM_CAMSS_VFE_H */ |