drivers/media/platform/renesas/Kconfig

# SPDX-License-Identifier: GPL-2.0-only

comment "Renesas media platform drivers"

# V4L drivers

config VIDEO_RENESAS_CEU
	tristate "Renesas Capture Engine Unit (CEU) driver"
	depends on V4L_PLATFORM_DRIVERS
	depends on VIDEO_DEV
	depends on ARCH_SHMOBILE || ARCH_R7S72100 || COMPILE_TEST
	select VIDEOBUF2_DMA_CONTIG
	select V4L2_FWNODE
	help
	  This is a v4l2 driver for the Renesas CEU Interface

config VIDEO_RCAR_CSI2
	tristate "R-Car MIPI CSI-2 Receiver"
	depends on V4L_PLATFORM_DRIVERS
	depends on VIDEO_DEV && OF
	depends on ARCH_RENESAS || COMPILE_TEST
	select MEDIA_CONTROLLER
	select VIDEO_V4L2_SUBDEV_API
	select RESET_CONTROLLER
	select V4L2_FWNODE
	help
	  Support for Renesas R-Car MIPI CSI-2 receiver.
	  Supports R-Car Gen3 and RZ/G2 SoCs.

	  To compile this driver as a module, choose M here: the
	  module will be called rcar-csi2.

config VIDEO_RCAR_ISP
	tristate "R-Car Image Signal Processor (ISP)"
	depends on V4L_PLATFORM_DRIVERS
	depends on VIDEO_DEV && OF
	depends on ARCH_RENESAS || COMPILE_TEST
	select MEDIA_CONTROLLER
	select VIDEO_V4L2_SUBDEV_API
	select RESET_CONTROLLER
	select V4L2_FWNODE
	help
	  Support for Renesas R-Car Image Signal Processor (ISP).
	  Enable this to support the Renesas R-Car Image Signal
	  Processor (ISP).

	  To compile this driver as a module, choose M here: the
	  module will be called rcar-isp.

config VIDEO_SH_VOU
	tristate "SuperH VOU video output driver"
	depends on V4L_PLATFORM_DRIVERS
	depends on VIDEO_DEV && I2C
	depends on ARCH_SHMOBILE || COMPILE_TEST
	select VIDEOBUF2_DMA_CONTIG
	help
	  Support for the Video Output Unit (VOU) on SuperH SoCs.

source "drivers/media/platform/renesas/rcar-vin/Kconfig"
source "drivers/media/platform/renesas/rzg2l-cru/Kconfig"

# Mem2mem drivers

config VIDEO_RENESAS_FCP
	tristate "Renesas Frame Compression Processor"
	depends on V4L_MEM2MEM_DRIVERS
	depends on ARCH_RENESAS || COMPILE_TEST
	depends on OF
	help
	  This is a driver for the Renesas Frame Compression Processor (FCP).
	  The FCP is a companion module of video processing modules in the
	  Renesas R-Car Gen3 and RZ/G2 SoCs. It handles memory access for
	  the codec, VSP and FDP modules.

	  To compile this driver as a module, choose M here: the module
	  will be called rcar-fcp.

config VIDEO_RENESAS_FDP1
	tristate "Renesas Fine Display Processor"
	depends on V4L_MEM2MEM_DRIVERS
	depends on VIDEO_DEV
	depends on ARCH_RENESAS || COMPILE_TEST
	depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
	select VIDEOBUF2_DMA_CONTIG
	select V4L2_MEM2MEM_DEV
	help
	  This is a V4L2 driver for the Renesas Fine Display Processor
	  providing colour space conversion, and de-interlacing features.

	  To compile this driver as a module, choose M here: the module
	  will be called rcar_fdp1.

config VIDEO_RENESAS_JPU
	tristate "Renesas JPEG Processing Unit"
	depends on V4L_MEM2MEM_DRIVERS
	depends on VIDEO_DEV
	depends on ARCH_RENESAS || COMPILE_TEST
	select VIDEOBUF2_DMA_CONTIG
	select V4L2_MEM2MEM_DEV
	help
	  This is a V4L2 driver for the Renesas JPEG Processing Unit.

	  To compile this driver as a module, choose M here: the module
	  will be called rcar_jpu.

config VIDEO_RENESAS_VSP1
	tristate "Renesas VSP1 Video Processing Engine"
	depends on V4L_MEM2MEM_DRIVERS
	depends on VIDEO_DEV
	depends on ARCH_RENESAS || COMPILE_TEST
	depends on (!ARM64 && !VIDEO_RENESAS_FCP) || VIDEO_RENESAS_FCP
	select MEDIA_CONTROLLER
	select VIDEO_V4L2_SUBDEV_API
	select VIDEOBUF2_DMA_CONTIG
	select VIDEOBUF2_VMALLOC
	help
	  This is a V4L2 driver for the Renesas VSP1 video processing engine.

	  To compile this driver as a module, choose M here: the module
	  will be called vsp1.

# SDR drivers

config VIDEO_RCAR_DRIF
	tristate "Renesas Digital Radio Interface (DRIF)"
	depends on SDR_PLATFORM_DRIVERS
	depends on VIDEO_DEV
	depends on ARCH_RENESAS || COMPILE_TEST
	select VIDEOBUF2_VMALLOC
	select V4L2_ASYNC
	help
	  Say Y if you want to enable R-Car Gen3 DRIF support. DRIF is Digital
	  Radio Interface that interfaces with an RF front end chip. It is a
	  receiver of digital data which uses DMA to transfer received data to
	  a configured location for an application to use.

	  To compile this driver as a module, choose M here; the module
	  will be called rcar_drif.