| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * MaxLinear MxL301RF OFDM tuner driver |
| * |
| * Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com> |
| */ |
| |
| /* |
| * NOTICE: |
| * This driver is incomplete and lacks init/config of the chips, |
| * as the necessary info is not disclosed. |
| * Other features like get_if_frequency() are missing as well. |
| * It assumes that users of this driver (such as a PCI bridge of |
| * DTV receiver cards) properly init and configure the chip |
| * via I2C *before* calling this driver's init() function. |
| * |
| * Currently, PT3 driver is the only one that uses this driver, |
| * and contains init/config code in its firmware. |
| * Thus some part of the code might be dependent on PT3 specific config. |
| */ |
| |
| #include <linux/kernel.h> |
| #include "mxl301rf.h" |
| |
| struct mxl301rf_state { |
| struct mxl301rf_config cfg; |
| struct i2c_client *i2c; |
| }; |
| |
| static struct mxl301rf_state *cfg_to_state(struct mxl301rf_config *c) |
| { |
| return container_of(c, struct mxl301rf_state, cfg); |
| } |
| |
| static int raw_write(struct mxl301rf_state *state, const u8 *buf, int len) |
| { |
| int ret; |
| |
| ret = i2c_master_send(state->i2c, buf, len); |
| if (ret >= 0 && ret < len) |
| ret = -EIO; |
| return (ret == len) ? 0 : ret; |
| } |
| |
| static int reg_write(struct mxl301rf_state *state, u8 reg, u8 val) |
| { |
| u8 buf[2] = { reg, val }; |
| |
| return raw_write(state, buf, 2); |
| } |
| |
| static int reg_read(struct mxl301rf_state *state, u8 reg, u8 *val) |
| { |
| u8 wbuf[2] = { 0xfb, reg }; |
| int ret; |
| |
| ret = raw_write(state, wbuf, sizeof(wbuf)); |
| if (ret == 0) |
| ret = i2c_master_recv(state->i2c, val, 1); |
| if (ret >= 0 && ret < 1) |
| ret = -EIO; |
| return (ret == 1) ? 0 : ret; |
| } |
| |
| /* tuner_ops */ |
| |
| /* get RSSI and update propery cache, set to *out in % */ |
| static int mxl301rf_get_rf_strength(struct dvb_frontend *fe, u16 *out) |
| { |
| struct mxl301rf_state *state; |
| int ret; |
| u8 rf_in1, rf_in2, rf_off1, rf_off2; |
| u16 rf_in, rf_off; |
| s64 level; |
| struct dtv_fe_stats *rssi; |
| |
| rssi = &fe->dtv_property_cache.strength; |
| rssi->len = 1; |
| rssi->stat[0].scale = FE_SCALE_NOT_AVAILABLE; |
| *out = 0; |
| |
| state = fe->tuner_priv; |
| ret = reg_write(state, 0x14, 0x01); |
| if (ret < 0) |
| return ret; |
| usleep_range(1000, 2000); |
| |
| ret = reg_read(state, 0x18, &rf_in1); |
| if (ret == 0) |
| ret = reg_read(state, 0x19, &rf_in2); |
| if (ret == 0) |
| ret = reg_read(state, 0xd6, &rf_off1); |
| if (ret == 0) |
| ret = reg_read(state, 0xd7, &rf_off2); |
| if (ret != 0) |
| return ret; |
| |
| rf_in = (rf_in2 & 0x07) << 8 | rf_in1; |
| rf_off = (rf_off2 & 0x0f) << 5 | (rf_off1 >> 3); |
| level = rf_in - rf_off - (113 << 3); /* x8 dBm */ |
| level = level * 1000 / 8; |
| rssi->stat[0].svalue = level; |
| rssi->stat[0].scale = FE_SCALE_DECIBEL; |
| /* *out = (level - min) * 100 / (max - min) */ |
| *out = (rf_in - rf_off + (1 << 9) - 1) * 100 / ((5 << 9) - 2); |
| return 0; |
| } |
| |
| /* spur shift parameters */ |
| struct shf { |
| u32 freq; /* Channel center frequency */ |
| u32 ofst_th; /* Offset frequency threshold */ |
| u8 shf_val; /* Spur shift value */ |
| u8 shf_dir; /* Spur shift direction */ |
| }; |
| |
| static const struct shf shf_tab[] = { |
| { 64500, 500, 0x92, 0x07 }, |
| { 191500, 300, 0xe2, 0x07 }, |
| { 205500, 500, 0x2c, 0x04 }, |
| { 212500, 500, 0x1e, 0x04 }, |
| { 226500, 500, 0xd4, 0x07 }, |
| { 99143, 500, 0x9c, 0x07 }, |
| { 173143, 500, 0xd4, 0x07 }, |
| { 191143, 300, 0xd4, 0x07 }, |
| { 207143, 500, 0xce, 0x07 }, |
| { 225143, 500, 0xce, 0x07 }, |
| { 243143, 500, 0xd4, 0x07 }, |
| { 261143, 500, 0xd4, 0x07 }, |
| { 291143, 500, 0xd4, 0x07 }, |
| { 339143, 500, 0x2c, 0x04 }, |
| { 117143, 500, 0x7a, 0x07 }, |
| { 135143, 300, 0x7a, 0x07 }, |
| { 153143, 500, 0x01, 0x07 } |
| }; |
| |
| struct reg_val { |
| u8 reg; |
| u8 val; |
| } __attribute__ ((__packed__)); |
| |
| static const struct reg_val set_idac[] = { |
| { 0x0d, 0x00 }, |
| { 0x0c, 0x67 }, |
| { 0x6f, 0x89 }, |
| { 0x70, 0x0c }, |
| { 0x6f, 0x8a }, |
| { 0x70, 0x0e }, |
| { 0x6f, 0x8b }, |
| { 0x70, 0x1c }, |
| }; |
| |
| static int mxl301rf_set_params(struct dvb_frontend *fe) |
| { |
| struct reg_val tune0[] = { |
| { 0x13, 0x00 }, /* abort tuning */ |
| { 0x3b, 0xc0 }, |
| { 0x3b, 0x80 }, |
| { 0x10, 0x95 }, /* BW */ |
| { 0x1a, 0x05 }, |
| { 0x61, 0x00 }, /* spur shift value (placeholder) */ |
| { 0x62, 0xa0 } /* spur shift direction (placeholder) */ |
| }; |
| |
| struct reg_val tune1[] = { |
| { 0x11, 0x40 }, /* RF frequency L (placeholder) */ |
| { 0x12, 0x0e }, /* RF frequency H (placeholder) */ |
| { 0x13, 0x01 } /* start tune */ |
| }; |
| |
| struct mxl301rf_state *state; |
| u32 freq; |
| u16 f; |
| u32 tmp, div; |
| int i, ret; |
| |
| state = fe->tuner_priv; |
| freq = fe->dtv_property_cache.frequency; |
| |
| /* spur shift function (for analog) */ |
| for (i = 0; i < ARRAY_SIZE(shf_tab); i++) { |
| if (freq >= (shf_tab[i].freq - shf_tab[i].ofst_th) * 1000 && |
| freq <= (shf_tab[i].freq + shf_tab[i].ofst_th) * 1000) { |
| tune0[5].val = shf_tab[i].shf_val; |
| tune0[6].val = 0xa0 | shf_tab[i].shf_dir; |
| break; |
| } |
| } |
| ret = raw_write(state, (u8 *) tune0, sizeof(tune0)); |
| if (ret < 0) |
| goto failed; |
| usleep_range(3000, 4000); |
| |
| /* convert freq to 10.6 fixed point float [MHz] */ |
| f = freq / 1000000; |
| tmp = freq % 1000000; |
| div = 1000000; |
| for (i = 0; i < 6; i++) { |
| f <<= 1; |
| div >>= 1; |
| if (tmp > div) { |
| tmp -= div; |
| f |= 1; |
| } |
| } |
| if (tmp > 7812) |
| f++; |
| tune1[0].val = f & 0xff; |
| tune1[1].val = f >> 8; |
| ret = raw_write(state, (u8 *) tune1, sizeof(tune1)); |
| if (ret < 0) |
| goto failed; |
| msleep(31); |
| |
| ret = reg_write(state, 0x1a, 0x0d); |
| if (ret < 0) |
| goto failed; |
| ret = raw_write(state, (u8 *) set_idac, sizeof(set_idac)); |
| if (ret < 0) |
| goto failed; |
| return 0; |
| |
| failed: |
| dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n", |
| __func__, fe->dvb->num, fe->id); |
| return ret; |
| } |
| |
| static const struct reg_val standby_data[] = { |
| { 0x01, 0x00 }, |
| { 0x13, 0x00 } |
| }; |
| |
| static int mxl301rf_sleep(struct dvb_frontend *fe) |
| { |
| struct mxl301rf_state *state; |
| int ret; |
| |
| state = fe->tuner_priv; |
| ret = raw_write(state, (u8 *)standby_data, sizeof(standby_data)); |
| if (ret < 0) |
| dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n", |
| __func__, fe->dvb->num, fe->id); |
| return ret; |
| } |
| |
| |
| /* init sequence is not public. |
| * the parent must have init'ed the device. |
| * just wake up here. |
| */ |
| static int mxl301rf_init(struct dvb_frontend *fe) |
| { |
| struct mxl301rf_state *state; |
| int ret; |
| |
| state = fe->tuner_priv; |
| |
| ret = reg_write(state, 0x01, 0x01); |
| if (ret < 0) { |
| dev_warn(&state->i2c->dev, "(%s) failed. [adap%d-fe%d]\n", |
| __func__, fe->dvb->num, fe->id); |
| return ret; |
| } |
| return 0; |
| } |
| |
| /* I2C driver functions */ |
| |
| static const struct dvb_tuner_ops mxl301rf_ops = { |
| .info = { |
| .name = "MaxLinear MxL301RF", |
| |
| .frequency_min_hz = 93 * MHz, |
| .frequency_max_hz = 803 * MHz + 142857, |
| }, |
| |
| .init = mxl301rf_init, |
| .sleep = mxl301rf_sleep, |
| |
| .set_params = mxl301rf_set_params, |
| .get_rf_strength = mxl301rf_get_rf_strength, |
| }; |
| |
| |
| static int mxl301rf_probe(struct i2c_client *client) |
| { |
| struct mxl301rf_state *state; |
| struct mxl301rf_config *cfg; |
| struct dvb_frontend *fe; |
| |
| state = kzalloc(sizeof(*state), GFP_KERNEL); |
| if (!state) |
| return -ENOMEM; |
| |
| state->i2c = client; |
| cfg = client->dev.platform_data; |
| |
| memcpy(&state->cfg, cfg, sizeof(state->cfg)); |
| fe = cfg->fe; |
| fe->tuner_priv = state; |
| memcpy(&fe->ops.tuner_ops, &mxl301rf_ops, sizeof(mxl301rf_ops)); |
| |
| i2c_set_clientdata(client, &state->cfg); |
| dev_info(&client->dev, "MaxLinear MxL301RF attached.\n"); |
| return 0; |
| } |
| |
| static void mxl301rf_remove(struct i2c_client *client) |
| { |
| struct mxl301rf_state *state; |
| |
| state = cfg_to_state(i2c_get_clientdata(client)); |
| state->cfg.fe->tuner_priv = NULL; |
| kfree(state); |
| } |
| |
| |
| static const struct i2c_device_id mxl301rf_id[] = { |
| { "mxl301rf" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, mxl301rf_id); |
| |
| static struct i2c_driver mxl301rf_driver = { |
| .driver = { |
| .name = "mxl301rf", |
| }, |
| .probe = mxl301rf_probe, |
| .remove = mxl301rf_remove, |
| .id_table = mxl301rf_id, |
| }; |
| |
| module_i2c_driver(mxl301rf_driver); |
| |
| MODULE_DESCRIPTION("MaxLinear MXL301RF tuner"); |
| MODULE_AUTHOR("Akihiro TSUKADA"); |
| MODULE_LICENSE("GPL"); |