| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * NXP TDA18250 silicon tuner driver |
| * |
| * Copyright (C) 2017 Olli Salonen <olli.salonen@iki.fi> |
| */ |
| |
| #include "tda18250_priv.h" |
| #include <linux/regmap.h> |
| |
| static const struct dvb_tuner_ops tda18250_ops; |
| |
| static int tda18250_power_control(struct dvb_frontend *fe, |
| unsigned int power_state) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct tda18250_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| unsigned int utmp; |
| |
| dev_dbg(&client->dev, "power state: %d", power_state); |
| |
| switch (power_state) { |
| case TDA18250_POWER_NORMAL: |
| ret = regmap_write_bits(dev->regmap, R06_POWER2, 0x07, 0x00); |
| if (ret) |
| goto err; |
| ret = regmap_write_bits(dev->regmap, R25_REF, 0xc0, 0xc0); |
| if (ret) |
| goto err; |
| break; |
| case TDA18250_POWER_STANDBY: |
| if (dev->loopthrough) { |
| ret = regmap_write_bits(dev->regmap, |
| R25_REF, 0xc0, 0x80); |
| if (ret) |
| goto err; |
| ret = regmap_write_bits(dev->regmap, |
| R06_POWER2, 0x07, 0x02); |
| if (ret) |
| goto err; |
| ret = regmap_write_bits(dev->regmap, |
| R10_LT1, 0x80, 0x00); |
| if (ret) |
| goto err; |
| } else { |
| ret = regmap_write_bits(dev->regmap, |
| R25_REF, 0xc0, 0x80); |
| if (ret) |
| goto err; |
| ret = regmap_write_bits(dev->regmap, |
| R06_POWER2, 0x07, 0x01); |
| if (ret) |
| goto err; |
| ret = regmap_read(dev->regmap, |
| R0D_AGC12, &utmp); |
| if (ret) |
| goto err; |
| ret = regmap_write_bits(dev->regmap, |
| R0D_AGC12, 0x03, 0x03); |
| if (ret) |
| goto err; |
| ret = regmap_write_bits(dev->regmap, |
| R10_LT1, 0x80, 0x80); |
| if (ret) |
| goto err; |
| ret = regmap_write_bits(dev->regmap, |
| R0D_AGC12, 0x03, utmp & 0x03); |
| if (ret) |
| goto err; |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| goto err; |
| } |
| |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static int tda18250_wait_for_irq(struct dvb_frontend *fe, |
| int maxwait, int step, u8 irq) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct tda18250_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| unsigned long timeout; |
| bool triggered; |
| unsigned int utmp; |
| |
| triggered = false; |
| timeout = jiffies + msecs_to_jiffies(maxwait); |
| while (!time_after(jiffies, timeout)) { |
| // check for the IRQ |
| ret = regmap_read(dev->regmap, R08_IRQ1, &utmp); |
| if (ret) |
| goto err; |
| if ((utmp & irq) == irq) { |
| triggered = true; |
| break; |
| } |
| msleep(step); |
| } |
| |
| dev_dbg(&client->dev, "waited IRQ (0x%02x) %d ms, triggered: %s", irq, |
| jiffies_to_msecs(jiffies) - |
| (jiffies_to_msecs(timeout) - maxwait), |
| triggered ? "true" : "false"); |
| |
| if (!triggered) |
| return -ETIMEDOUT; |
| |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static int tda18250_init(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct tda18250_dev *dev = i2c_get_clientdata(client); |
| int ret, i; |
| |
| /* default values for various regs */ |
| static const u8 init_regs[][2] = { |
| { R0C_AGC11, 0xc7 }, |
| { R0D_AGC12, 0x5d }, |
| { R0E_AGC13, 0x40 }, |
| { R0F_AGC14, 0x0e }, |
| { R10_LT1, 0x47 }, |
| { R11_LT2, 0x4e }, |
| { R12_AGC21, 0x26 }, |
| { R13_AGC22, 0x60 }, |
| { R18_AGC32, 0x37 }, |
| { R19_AGC33, 0x09 }, |
| { R1A_AGCK, 0x00 }, |
| { R1E_WI_FI, 0x29 }, |
| { R1F_RF_BPF, 0x06 }, |
| { R20_IR_MIX, 0xc6 }, |
| { R21_IF_AGC, 0x00 }, |
| { R2C_PS1, 0x75 }, |
| { R2D_PS2, 0x06 }, |
| { R2E_PS3, 0x07 }, |
| { R30_RSSI2, 0x0e }, |
| { R31_IRQ_CTRL, 0x00 }, |
| { R39_SD5, 0x00 }, |
| { R3B_REGU, 0x55 }, |
| { R3C_RCCAL1, 0xa7 }, |
| { R3F_IRCAL2, 0x85 }, |
| { R40_IRCAL3, 0x87 }, |
| { R41_IRCAL4, 0xc0 }, |
| { R43_PD1, 0x40 }, |
| { R44_PD2, 0xc0 }, |
| { R46_CPUMP, 0x0c }, |
| { R47_LNAPOL, 0x64 }, |
| { R4B_XTALOSC1, 0x30 }, |
| { R59_AGC2_UP2, 0x05 }, |
| { R5B_AGC_AUTO, 0x07 }, |
| { R5C_AGC_DEBUG, 0x00 }, |
| }; |
| |
| /* crystal related regs depend on frequency */ |
| static const u8 xtal_regs[][5] = { |
| /* reg: 4d 4e 4f 50 51 */ |
| [TDA18250_XTAL_FREQ_16MHZ] = { 0x3e, 0x80, 0x50, 0x00, 0x20 }, |
| [TDA18250_XTAL_FREQ_24MHZ] = { 0x5d, 0xc0, 0xec, 0x00, 0x18 }, |
| [TDA18250_XTAL_FREQ_25MHZ] = { 0x61, 0xa8, 0xec, 0x80, 0x19 }, |
| [TDA18250_XTAL_FREQ_27MHZ] = { 0x69, 0x78, 0x8d, 0x80, 0x1b }, |
| [TDA18250_XTAL_FREQ_30MHZ] = { 0x75, 0x30, 0x8f, 0x00, 0x1e }, |
| }; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| ret = tda18250_power_control(fe, TDA18250_POWER_NORMAL); |
| if (ret) |
| goto err; |
| |
| msleep(20); |
| |
| if (dev->warm) |
| goto warm; |
| |
| /* set initial register values */ |
| for (i = 0; i < ARRAY_SIZE(init_regs); i++) { |
| ret = regmap_write(dev->regmap, init_regs[i][0], |
| init_regs[i][1]); |
| if (ret) |
| goto err; |
| } |
| |
| /* set xtal related regs */ |
| ret = regmap_bulk_write(dev->regmap, R4D_XTALFLX1, |
| xtal_regs[dev->xtal_freq], 5); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write_bits(dev->regmap, R10_LT1, 0x80, |
| dev->loopthrough ? 0x00 : 0x80); |
| if (ret) |
| goto err; |
| |
| /* clear IRQ */ |
| ret = regmap_write(dev->regmap, R0A_IRQ3, TDA18250_IRQ_HW_INIT); |
| if (ret) |
| goto err; |
| |
| /* start HW init */ |
| ret = regmap_write(dev->regmap, R2A_MSM1, 0x70); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, R2B_MSM2, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_HW_INIT); |
| if (ret) |
| goto err; |
| |
| /* tuner calibration */ |
| ret = regmap_write(dev->regmap, R2A_MSM1, 0x02); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, R2B_MSM2, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_CAL); |
| if (ret) |
| goto err; |
| |
| dev->warm = true; |
| |
| warm: |
| /* power up LNA */ |
| ret = regmap_write_bits(dev->regmap, R0C_AGC11, 0x80, 0x00); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d", ret); |
| return ret; |
| } |
| |
| static int tda18250_set_agc(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct tda18250_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| u8 utmp, utmp2; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| ret = regmap_write_bits(dev->regmap, R1F_RF_BPF, 0x87, 0x06); |
| if (ret) |
| goto err; |
| |
| utmp = ((c->frequency < 100000000) && |
| ((c->delivery_system == SYS_DVBC_ANNEX_A) || |
| (c->delivery_system == SYS_DVBC_ANNEX_C)) && |
| (c->bandwidth_hz == 6000000)) ? 0x80 : 0x00; |
| ret = regmap_write(dev->regmap, R5A_H3H5, utmp); |
| if (ret) |
| goto err; |
| |
| /* AGC1 */ |
| switch (c->delivery_system) { |
| case SYS_ATSC: |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| utmp = 4; |
| break; |
| default: /* DVB-C/QAM */ |
| switch (c->bandwidth_hz) { |
| case 6000000: |
| utmp = (c->frequency < 800000000) ? 6 : 4; |
| break; |
| default: /* 7.935 and 8 MHz */ |
| utmp = (c->frequency < 100000000) ? 2 : 3; |
| break; |
| } |
| break; |
| } |
| |
| ret = regmap_write_bits(dev->regmap, R0C_AGC11, 0x07, utmp); |
| if (ret) |
| goto err; |
| |
| /* AGC2 */ |
| switch (c->delivery_system) { |
| case SYS_ATSC: |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| utmp = (c->frequency < 320000000) ? 20 : 16; |
| utmp2 = (c->frequency < 320000000) ? 22 : 18; |
| break; |
| default: /* DVB-C/QAM */ |
| switch (c->bandwidth_hz) { |
| case 6000000: |
| if (c->frequency < 600000000) { |
| utmp = 18; |
| utmp2 = 22; |
| } else if (c->frequency < 800000000) { |
| utmp = 16; |
| utmp2 = 20; |
| } else { |
| utmp = 14; |
| utmp2 = 16; |
| } |
| break; |
| default: /* 7.935 and 8 MHz */ |
| utmp = (c->frequency < 320000000) ? 16 : 18; |
| utmp2 = (c->frequency < 320000000) ? 18 : 20; |
| break; |
| } |
| break; |
| } |
| ret = regmap_write_bits(dev->regmap, R58_AGC2_UP1, 0x1f, utmp2+8); |
| if (ret) |
| goto err; |
| ret = regmap_write_bits(dev->regmap, R13_AGC22, 0x1f, utmp); |
| if (ret) |
| goto err; |
| ret = regmap_write_bits(dev->regmap, R14_AGC23, 0x1f, utmp2); |
| if (ret) |
| goto err; |
| |
| switch (c->delivery_system) { |
| case SYS_ATSC: |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| utmp = 98; |
| break; |
| default: /* DVB-C/QAM */ |
| utmp = 90; |
| break; |
| } |
| ret = regmap_write_bits(dev->regmap, R16_AGC25, 0xf8, utmp); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write_bits(dev->regmap, R12_AGC21, 0x60, |
| (c->frequency > 800000000) ? 0x40 : 0x20); |
| if (ret) |
| goto err; |
| |
| /* AGC3 */ |
| switch (c->delivery_system) { |
| case SYS_ATSC: |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| utmp = (c->frequency < 320000000) ? 5 : 7; |
| utmp2 = (c->frequency < 320000000) ? 10 : 12; |
| break; |
| default: /* DVB-C/QAM */ |
| utmp = 7; |
| utmp2 = 12; |
| break; |
| } |
| ret = regmap_write(dev->regmap, R17_AGC31, (utmp << 4) | utmp2); |
| if (ret) |
| goto err; |
| |
| /* S2D */ |
| switch (c->delivery_system) { |
| case SYS_ATSC: |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| if (c->bandwidth_hz == 8000000) |
| utmp = 0x04; |
| else |
| utmp = (c->frequency < 320000000) ? 0x04 : 0x02; |
| break; |
| default: /* DVB-C/QAM */ |
| if (c->bandwidth_hz == 6000000) |
| utmp = ((c->frequency > 172544000) && |
| (c->frequency < 320000000)) ? 0x04 : 0x02; |
| else /* 7.935 and 8 MHz */ |
| utmp = ((c->frequency > 320000000) && |
| (c->frequency < 600000000)) ? 0x02 : 0x04; |
| break; |
| } |
| ret = regmap_write_bits(dev->regmap, R20_IR_MIX, 0x06, utmp); |
| if (ret) |
| goto err; |
| |
| switch (c->delivery_system) { |
| case SYS_ATSC: |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| utmp = 0; |
| break; |
| default: /* DVB-C/QAM */ |
| utmp = (c->frequency < 600000000) ? 0 : 3; |
| break; |
| } |
| ret = regmap_write_bits(dev->regmap, R16_AGC25, 0x03, utmp); |
| if (ret) |
| goto err; |
| |
| utmp = 0x09; |
| switch (c->delivery_system) { |
| case SYS_ATSC: |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| if (c->bandwidth_hz == 8000000) |
| utmp = 0x0c; |
| break; |
| default: /* DVB-C/QAM */ |
| utmp = 0x0c; |
| break; |
| } |
| ret = regmap_write_bits(dev->regmap, R0F_AGC14, 0x3f, utmp); |
| if (ret) |
| goto err; |
| |
| return 0; |
| err: |
| dev_dbg(&client->dev, "failed=%d", ret); |
| return ret; |
| } |
| |
| static int tda18250_pll_calc(struct dvb_frontend *fe, u8 *rdiv, |
| u8 *ndiv, u8 *icp) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct tda18250_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| int ret; |
| unsigned int uval, exp, lopd, scale; |
| unsigned long fvco; |
| |
| ret = regmap_read(dev->regmap, R34_MD1, &uval); |
| if (ret) |
| goto err; |
| |
| exp = (uval & 0x70) >> 4; |
| if (exp > 5) |
| exp = 0; |
| lopd = 1 << (exp - 1); |
| scale = uval & 0x0f; |
| fvco = lopd * scale * ((c->frequency / 1000) + dev->if_frequency); |
| |
| switch (dev->xtal_freq) { |
| case TDA18250_XTAL_FREQ_16MHZ: |
| *rdiv = 1; |
| *ndiv = 0; |
| *icp = (fvco < 6622000) ? 0x05 : 0x02; |
| break; |
| case TDA18250_XTAL_FREQ_24MHZ: |
| case TDA18250_XTAL_FREQ_25MHZ: |
| *rdiv = 3; |
| *ndiv = 1; |
| *icp = (fvco < 6622000) ? 0x05 : 0x02; |
| break; |
| case TDA18250_XTAL_FREQ_27MHZ: |
| if (fvco < 6643000) { |
| *rdiv = 2; |
| *ndiv = 0; |
| *icp = 0x05; |
| } else if (fvco < 6811000) { |
| *rdiv = 2; |
| *ndiv = 0; |
| *icp = 0x06; |
| } else { |
| *rdiv = 3; |
| *ndiv = 1; |
| *icp = 0x02; |
| } |
| break; |
| case TDA18250_XTAL_FREQ_30MHZ: |
| *rdiv = 2; |
| *ndiv = 0; |
| *icp = (fvco < 6811000) ? 0x05 : 0x02; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| dev_dbg(&client->dev, |
| "lopd=%d scale=%u fvco=%lu, rdiv=%d ndiv=%d icp=%d", |
| lopd, scale, fvco, *rdiv, *ndiv, *icp); |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static int tda18250_set_params(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct tda18250_dev *dev = i2c_get_clientdata(client); |
| struct dtv_frontend_properties *c = &fe->dtv_property_cache; |
| u32 if_khz; |
| int ret; |
| unsigned int i, j; |
| u8 utmp; |
| u8 buf[3]; |
| |
| #define REG 0 |
| #define MASK 1 |
| #define DVBT_6 2 |
| #define DVBT_7 3 |
| #define DVBT_8 4 |
| #define DVBC_6 5 |
| #define DVBC_8 6 |
| #define ATSC 7 |
| |
| static const u8 delsys_params[][16] = { |
| [REG] = { 0x22, 0x23, 0x24, 0x21, 0x0d, 0x0c, 0x0f, 0x14, |
| 0x0e, 0x12, 0x58, 0x59, 0x1a, 0x19, 0x1e, 0x30 }, |
| [MASK] = { 0x77, 0xff, 0xff, 0x87, 0xf0, 0x78, 0x07, 0xe0, |
| 0x60, 0x0f, 0x60, 0x0f, 0x33, 0x30, 0x80, 0x06 }, |
| [DVBT_6] = { 0x51, 0x03, 0x83, 0x82, 0x40, 0x48, 0x01, 0xe0, |
| 0x60, 0x0f, 0x60, 0x05, 0x03, 0x10, 0x00, 0x04 }, |
| [DVBT_7] = { 0x52, 0x03, 0x85, 0x82, 0x40, 0x48, 0x01, 0xe0, |
| 0x60, 0x0f, 0x60, 0x05, 0x03, 0x10, 0x00, 0x04 }, |
| [DVBT_8] = { 0x53, 0x03, 0x87, 0x82, 0x40, 0x48, 0x06, 0xe0, |
| 0x60, 0x07, 0x60, 0x05, 0x03, 0x10, 0x00, 0x04 }, |
| [DVBC_6] = { 0x32, 0x05, 0x86, 0x82, 0x50, 0x00, 0x06, 0x60, |
| 0x40, 0x0e, 0x60, 0x05, 0x33, 0x10, 0x00, 0x04 }, |
| [DVBC_8] = { 0x53, 0x03, 0x88, 0x82, 0x50, 0x00, 0x06, 0x60, |
| 0x40, 0x0e, 0x60, 0x05, 0x33, 0x10, 0x00, 0x04 }, |
| [ATSC] = { 0x51, 0x03, 0x83, 0x82, 0x40, 0x48, 0x01, 0xe0, |
| 0x40, 0x0e, 0x60, 0x05, 0x03, 0x00, 0x80, 0x04 }, |
| }; |
| |
| dev_dbg(&client->dev, |
| "delivery_system=%d frequency=%u bandwidth_hz=%u", |
| c->delivery_system, c->frequency, c->bandwidth_hz); |
| |
| |
| switch (c->delivery_system) { |
| case SYS_ATSC: |
| j = ATSC; |
| if_khz = dev->if_atsc; |
| break; |
| case SYS_DVBT: |
| case SYS_DVBT2: |
| if (c->bandwidth_hz == 0) { |
| ret = -EINVAL; |
| goto err; |
| } else if (c->bandwidth_hz <= 6000000) { |
| j = DVBT_6; |
| if_khz = dev->if_dvbt_6; |
| } else if (c->bandwidth_hz <= 7000000) { |
| j = DVBT_7; |
| if_khz = dev->if_dvbt_7; |
| } else if (c->bandwidth_hz <= 8000000) { |
| j = DVBT_8; |
| if_khz = dev->if_dvbt_8; |
| } else { |
| ret = -EINVAL; |
| goto err; |
| } |
| break; |
| case SYS_DVBC_ANNEX_A: |
| case SYS_DVBC_ANNEX_C: |
| if (c->bandwidth_hz == 0) { |
| ret = -EINVAL; |
| goto err; |
| } else if (c->bandwidth_hz <= 6000000) { |
| j = DVBC_6; |
| if_khz = dev->if_dvbc_6; |
| } else if (c->bandwidth_hz <= 8000000) { |
| j = DVBC_8; |
| if_khz = dev->if_dvbc_8; |
| } else { |
| ret = -EINVAL; |
| goto err; |
| } |
| break; |
| default: |
| ret = -EINVAL; |
| dev_err(&client->dev, "unsupported delivery system=%d", |
| c->delivery_system); |
| goto err; |
| } |
| |
| /* set delivery system dependent registers */ |
| for (i = 0; i < 16; i++) { |
| ret = regmap_write_bits(dev->regmap, delsys_params[REG][i], |
| delsys_params[MASK][i], delsys_params[j][i]); |
| if (ret) |
| goto err; |
| } |
| |
| /* set IF if needed */ |
| if (dev->if_frequency != if_khz) { |
| utmp = DIV_ROUND_CLOSEST(if_khz, 50); |
| ret = regmap_write(dev->regmap, R26_IF, utmp); |
| if (ret) |
| goto err; |
| dev->if_frequency = if_khz; |
| dev_dbg(&client->dev, "set IF=%u kHz", if_khz); |
| |
| } |
| |
| ret = tda18250_set_agc(fe); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write_bits(dev->regmap, R1A_AGCK, 0x03, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write_bits(dev->regmap, R14_AGC23, 0x40, 0x00); |
| if (ret) |
| goto err; |
| |
| /* set frequency */ |
| buf[0] = ((c->frequency / 1000) >> 16) & 0xff; |
| buf[1] = ((c->frequency / 1000) >> 8) & 0xff; |
| buf[2] = ((c->frequency / 1000) >> 0) & 0xff; |
| ret = regmap_bulk_write(dev->regmap, R27_RF1, buf, 3); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, R0A_IRQ3, TDA18250_IRQ_TUNE); |
| if (ret) |
| goto err; |
| |
| /* initial tune */ |
| ret = regmap_write(dev->regmap, R2A_MSM1, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, R2B_MSM2, 0x01); |
| if (ret) |
| goto err; |
| |
| ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_TUNE); |
| if (ret) |
| goto err; |
| |
| /* calc ndiv and rdiv */ |
| ret = tda18250_pll_calc(fe, &buf[0], &buf[1], &buf[2]); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write_bits(dev->regmap, R4F_XTALFLX3, 0xe0, |
| (buf[0] << 6) | (buf[1] << 5)); |
| if (ret) |
| goto err; |
| |
| /* clear IRQ */ |
| ret = regmap_write(dev->regmap, R0A_IRQ3, TDA18250_IRQ_TUNE); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write_bits(dev->regmap, R46_CPUMP, 0x07, 0x00); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write_bits(dev->regmap, R39_SD5, 0x03, 0x00); |
| if (ret) |
| goto err; |
| |
| /* tune again */ |
| ret = regmap_write(dev->regmap, R2A_MSM1, 0x01); /* tune */ |
| if (ret) |
| goto err; |
| |
| ret = regmap_write(dev->regmap, R2B_MSM2, 0x01); /* go */ |
| if (ret) |
| goto err; |
| |
| ret = tda18250_wait_for_irq(fe, 500, 10, TDA18250_IRQ_TUNE); |
| if (ret) |
| goto err; |
| |
| /* pll locking */ |
| msleep(20); |
| |
| ret = regmap_write_bits(dev->regmap, R2B_MSM2, 0x04, 0x04); |
| if (ret) |
| goto err; |
| |
| msleep(20); |
| |
| /* restore AGCK */ |
| ret = regmap_write_bits(dev->regmap, R1A_AGCK, 0x03, 0x03); |
| if (ret) |
| goto err; |
| |
| ret = regmap_write_bits(dev->regmap, R14_AGC23, 0x40, 0x40); |
| if (ret) |
| goto err; |
| |
| /* charge pump */ |
| ret = regmap_write_bits(dev->regmap, R46_CPUMP, 0x07, buf[2]); |
| |
| return 0; |
| err: |
| return ret; |
| } |
| |
| static int tda18250_get_if_frequency(struct dvb_frontend *fe, u32 *frequency) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct tda18250_dev *dev = i2c_get_clientdata(client); |
| |
| *frequency = dev->if_frequency * 1000; |
| return 0; |
| } |
| |
| static int tda18250_sleep(struct dvb_frontend *fe) |
| { |
| struct i2c_client *client = fe->tuner_priv; |
| struct tda18250_dev *dev = i2c_get_clientdata(client); |
| int ret; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| /* power down LNA */ |
| ret = regmap_write_bits(dev->regmap, R0C_AGC11, 0x80, 0x00); |
| if (ret) |
| return ret; |
| |
| /* set if freq to 0 in order to make sure it's set after wake up */ |
| dev->if_frequency = 0; |
| |
| ret = tda18250_power_control(fe, TDA18250_POWER_STANDBY); |
| return ret; |
| } |
| |
| static const struct dvb_tuner_ops tda18250_ops = { |
| .info = { |
| .name = "NXP TDA18250", |
| .frequency_min_hz = 42 * MHz, |
| .frequency_max_hz = 870 * MHz, |
| }, |
| |
| .init = tda18250_init, |
| .set_params = tda18250_set_params, |
| .get_if_frequency = tda18250_get_if_frequency, |
| .sleep = tda18250_sleep, |
| }; |
| |
| static int tda18250_probe(struct i2c_client *client) |
| { |
| struct tda18250_config *cfg = client->dev.platform_data; |
| struct dvb_frontend *fe = cfg->fe; |
| struct tda18250_dev *dev; |
| int ret; |
| unsigned char chip_id[3]; |
| |
| /* some registers are always read from HW */ |
| static const struct regmap_range tda18250_yes_ranges[] = { |
| regmap_reg_range(R05_POWER1, R0B_IRQ4), |
| regmap_reg_range(R21_IF_AGC, R21_IF_AGC), |
| regmap_reg_range(R2A_MSM1, R2B_MSM2), |
| regmap_reg_range(R2F_RSSI1, R31_IRQ_CTRL), |
| }; |
| |
| static const struct regmap_access_table tda18250_volatile_table = { |
| .yes_ranges = tda18250_yes_ranges, |
| .n_yes_ranges = ARRAY_SIZE(tda18250_yes_ranges), |
| }; |
| |
| static const struct regmap_config tda18250_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = TDA18250_NUM_REGS - 1, |
| .volatile_table = &tda18250_volatile_table, |
| }; |
| |
| dev = kzalloc(sizeof(*dev), GFP_KERNEL); |
| if (!dev) { |
| ret = -ENOMEM; |
| goto err; |
| } |
| |
| i2c_set_clientdata(client, dev); |
| |
| dev->fe = cfg->fe; |
| dev->loopthrough = cfg->loopthrough; |
| if (cfg->xtal_freq < TDA18250_XTAL_FREQ_MAX) { |
| dev->xtal_freq = cfg->xtal_freq; |
| } else { |
| ret = -EINVAL; |
| dev_err(&client->dev, "xtal_freq invalid=%d", cfg->xtal_freq); |
| goto err_kfree; |
| } |
| dev->if_dvbt_6 = cfg->if_dvbt_6; |
| dev->if_dvbt_7 = cfg->if_dvbt_7; |
| dev->if_dvbt_8 = cfg->if_dvbt_8; |
| dev->if_dvbc_6 = cfg->if_dvbc_6; |
| dev->if_dvbc_8 = cfg->if_dvbc_8; |
| dev->if_atsc = cfg->if_atsc; |
| |
| dev->if_frequency = 0; |
| dev->warm = false; |
| |
| dev->regmap = devm_regmap_init_i2c(client, &tda18250_regmap_config); |
| if (IS_ERR(dev->regmap)) { |
| ret = PTR_ERR(dev->regmap); |
| goto err_kfree; |
| } |
| |
| /* read the three chip ID registers */ |
| regmap_bulk_read(dev->regmap, R00_ID1, &chip_id, 3); |
| dev_dbg(&client->dev, "chip_id=%02x:%02x:%02x", |
| chip_id[0], chip_id[1], chip_id[2]); |
| |
| switch (chip_id[0]) { |
| case 0xc7: |
| dev->slave = false; |
| break; |
| case 0x47: |
| dev->slave = true; |
| break; |
| default: |
| ret = -ENODEV; |
| goto err_kfree; |
| } |
| |
| if (chip_id[1] != 0x4a) { |
| ret = -ENODEV; |
| goto err_kfree; |
| } |
| |
| switch (chip_id[2]) { |
| case 0x20: |
| dev_info(&client->dev, |
| "NXP TDA18250AHN/%s successfully identified", |
| dev->slave ? "S" : "M"); |
| break; |
| case 0x21: |
| dev_info(&client->dev, |
| "NXP TDA18250BHN/%s successfully identified", |
| dev->slave ? "S" : "M"); |
| break; |
| default: |
| ret = -ENODEV; |
| goto err_kfree; |
| } |
| |
| fe->tuner_priv = client; |
| memcpy(&fe->ops.tuner_ops, &tda18250_ops, |
| sizeof(struct dvb_tuner_ops)); |
| |
| /* put the tuner in standby */ |
| tda18250_power_control(fe, TDA18250_POWER_STANDBY); |
| |
| return 0; |
| err_kfree: |
| kfree(dev); |
| err: |
| dev_dbg(&client->dev, "failed=%d", ret); |
| return ret; |
| } |
| |
| static void tda18250_remove(struct i2c_client *client) |
| { |
| struct tda18250_dev *dev = i2c_get_clientdata(client); |
| struct dvb_frontend *fe = dev->fe; |
| |
| dev_dbg(&client->dev, "\n"); |
| |
| memset(&fe->ops.tuner_ops, 0, sizeof(struct dvb_tuner_ops)); |
| fe->tuner_priv = NULL; |
| kfree(dev); |
| } |
| |
| static const struct i2c_device_id tda18250_id_table[] = { |
| { "tda18250" }, |
| {} |
| }; |
| MODULE_DEVICE_TABLE(i2c, tda18250_id_table); |
| |
| static struct i2c_driver tda18250_driver = { |
| .driver = { |
| .name = "tda18250", |
| }, |
| .probe = tda18250_probe, |
| .remove = tda18250_remove, |
| .id_table = tda18250_id_table, |
| }; |
| |
| module_i2c_driver(tda18250_driver); |
| |
| MODULE_DESCRIPTION("NXP TDA18250 silicon tuner driver"); |
| MODULE_AUTHOR("Olli Salonen <olli.salonen@iki.fi>"); |
| MODULE_LICENSE("GPL"); |