| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Watchdog driver for TS-4800 based boards |
| * |
| * Copyright (c) 2015 - Savoir-faire Linux |
| * |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/platform_device.h> |
| #include <linux/regmap.h> |
| #include <linux/watchdog.h> |
| |
| static bool nowayout = WATCHDOG_NOWAYOUT; |
| module_param(nowayout, bool, 0); |
| MODULE_PARM_DESC(nowayout, |
| "Watchdog cannot be stopped once started (default=" |
| __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); |
| |
| /* possible feed values */ |
| #define TS4800_WDT_FEED_2S 0x1 |
| #define TS4800_WDT_FEED_10S 0x2 |
| #define TS4800_WDT_DISABLE 0x3 |
| |
| struct ts4800_wdt { |
| struct watchdog_device wdd; |
| struct regmap *regmap; |
| u32 feed_offset; |
| u32 feed_val; |
| }; |
| |
| /* |
| * TS-4800 supports the following timeout values: |
| * |
| * value desc |
| * --------------------- |
| * 0 feed for 338ms |
| * 1 feed for 2.706s |
| * 2 feed for 10.824s |
| * 3 disable watchdog |
| * |
| * Keep the regmap/timeout map ordered by timeout |
| */ |
| static const struct { |
| const int timeout; |
| const int regval; |
| } ts4800_wdt_map[] = { |
| { 2, TS4800_WDT_FEED_2S }, |
| { 10, TS4800_WDT_FEED_10S }, |
| }; |
| |
| #define MAX_TIMEOUT_INDEX (ARRAY_SIZE(ts4800_wdt_map) - 1) |
| |
| static void ts4800_write_feed(struct ts4800_wdt *wdt, u32 val) |
| { |
| regmap_write(wdt->regmap, wdt->feed_offset, val); |
| } |
| |
| static int ts4800_wdt_start(struct watchdog_device *wdd) |
| { |
| struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); |
| |
| ts4800_write_feed(wdt, wdt->feed_val); |
| return 0; |
| } |
| |
| static int ts4800_wdt_stop(struct watchdog_device *wdd) |
| { |
| struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); |
| |
| ts4800_write_feed(wdt, TS4800_WDT_DISABLE); |
| return 0; |
| } |
| |
| static int ts4800_wdt_set_timeout(struct watchdog_device *wdd, |
| unsigned int timeout) |
| { |
| struct ts4800_wdt *wdt = watchdog_get_drvdata(wdd); |
| int i; |
| |
| for (i = 0; i < MAX_TIMEOUT_INDEX; i++) { |
| if (ts4800_wdt_map[i].timeout >= timeout) |
| break; |
| } |
| |
| wdd->timeout = ts4800_wdt_map[i].timeout; |
| wdt->feed_val = ts4800_wdt_map[i].regval; |
| |
| return 0; |
| } |
| |
| static const struct watchdog_ops ts4800_wdt_ops = { |
| .owner = THIS_MODULE, |
| .start = ts4800_wdt_start, |
| .stop = ts4800_wdt_stop, |
| .set_timeout = ts4800_wdt_set_timeout, |
| }; |
| |
| static const struct watchdog_info ts4800_wdt_info = { |
| .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING, |
| .identity = "TS-4800 Watchdog", |
| }; |
| |
| static int ts4800_wdt_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct device_node *syscon_np; |
| struct watchdog_device *wdd; |
| struct ts4800_wdt *wdt; |
| u32 reg; |
| int ret; |
| |
| syscon_np = of_parse_phandle(np, "syscon", 0); |
| if (!syscon_np) { |
| dev_err(dev, "no syscon property\n"); |
| return -ENODEV; |
| } |
| |
| ret = of_property_read_u32_index(np, "syscon", 1, ®); |
| if (ret < 0) { |
| dev_err(dev, "no offset in syscon\n"); |
| of_node_put(syscon_np); |
| return ret; |
| } |
| |
| /* allocate memory for watchdog struct */ |
| wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL); |
| if (!wdt) { |
| of_node_put(syscon_np); |
| return -ENOMEM; |
| } |
| |
| /* set regmap and offset to know where to write */ |
| wdt->feed_offset = reg; |
| wdt->regmap = syscon_node_to_regmap(syscon_np); |
| of_node_put(syscon_np); |
| if (IS_ERR(wdt->regmap)) { |
| dev_err(dev, "cannot get parent's regmap\n"); |
| return PTR_ERR(wdt->regmap); |
| } |
| |
| /* Initialize struct watchdog_device */ |
| wdd = &wdt->wdd; |
| wdd->parent = dev; |
| wdd->info = &ts4800_wdt_info; |
| wdd->ops = &ts4800_wdt_ops; |
| wdd->min_timeout = ts4800_wdt_map[0].timeout; |
| wdd->max_timeout = ts4800_wdt_map[MAX_TIMEOUT_INDEX].timeout; |
| |
| watchdog_set_drvdata(wdd, wdt); |
| watchdog_set_nowayout(wdd, nowayout); |
| watchdog_init_timeout(wdd, 0, dev); |
| |
| /* |
| * As this watchdog supports only a few values, ts4800_wdt_set_timeout |
| * must be called to initialize timeout and feed_val with valid values. |
| * Default to maximum timeout if none, or an invalid one, is provided in |
| * device tree. |
| */ |
| if (!wdd->timeout) |
| wdd->timeout = wdd->max_timeout; |
| ts4800_wdt_set_timeout(wdd, wdd->timeout); |
| |
| /* |
| * The feed register is write-only, so it is not possible to determine |
| * watchdog's state. Disable it to be in a known state. |
| */ |
| ts4800_wdt_stop(wdd); |
| |
| ret = devm_watchdog_register_device(dev, wdd); |
| if (ret) |
| return ret; |
| |
| platform_set_drvdata(pdev, wdt); |
| |
| dev_info(dev, "initialized (timeout = %d sec, nowayout = %d)\n", |
| wdd->timeout, nowayout); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id ts4800_wdt_of_match[] = { |
| { .compatible = "technologic,ts4800-wdt", }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, ts4800_wdt_of_match); |
| |
| static struct platform_driver ts4800_wdt_driver = { |
| .probe = ts4800_wdt_probe, |
| .driver = { |
| .name = "ts4800_wdt", |
| .of_match_table = ts4800_wdt_of_match, |
| }, |
| }; |
| |
| module_platform_driver(ts4800_wdt_driver); |
| |
| MODULE_AUTHOR("Damien Riegel <damien.riegel@savoirfairelinux.com>"); |
| MODULE_DESCRIPTION("Watchdog driver for TS-4800 based boards"); |
| MODULE_LICENSE("GPL v2"); |
| MODULE_ALIAS("platform:ts4800_wdt"); |