| # |
| # EDAC Kconfig |
| # Copyright (c) 2008 Doug Thompson www.softwarebitmaker.com |
| # Licensed and distributed under the GPL |
| |
| config EDAC_ATOMIC_SCRUB |
| bool |
| |
| config EDAC_SUPPORT |
| bool |
| |
| menuconfig EDAC |
| tristate "EDAC (Error Detection And Correction) reporting" |
| depends on HAS_IOMEM && EDAC_SUPPORT && RAS |
| help |
| EDAC is a subsystem along with hardware-specific drivers designed to |
| report hardware errors. These are low-level errors that are reported |
| in the CPU or supporting chipset or other subsystems: |
| memory errors, cache errors, PCI errors, thermal throttling, etc.. |
| If unsure, select 'Y'. |
| |
| The mailing list for the EDAC project is linux-edac@vger.kernel.org. |
| |
| if EDAC |
| |
| config EDAC_LEGACY_SYSFS |
| bool "EDAC legacy sysfs" |
| default y |
| help |
| Enable the compatibility sysfs nodes. |
| Use 'Y' if your edac utilities aren't ported to work with the newer |
| structures. |
| |
| config EDAC_DEBUG |
| bool "Debugging" |
| select DEBUG_FS |
| help |
| This turns on debugging information for the entire EDAC subsystem. |
| You do so by inserting edac_module with "edac_debug_level=x." Valid |
| levels are 0-4 (from low to high) and by default it is set to 2. |
| Usually you should select 'N' here. |
| |
| config EDAC_DECODE_MCE |
| tristate "Decode MCEs in human-readable form (only on AMD for now)" |
| depends on CPU_SUP_AMD && X86_MCE_AMD |
| default y |
| help |
| Enable this option if you want to decode Machine Check Exceptions |
| occurring on your machine in human-readable form. |
| |
| You should definitely say Y here in case you want to decode MCEs |
| which occur really early upon boot, before the module infrastructure |
| has been initialized. |
| |
| config EDAC_GHES |
| bool "Output ACPI APEI/GHES BIOS detected errors via EDAC" |
| depends on ACPI_APEI_GHES && (EDAC=y) |
| help |
| Not all machines support hardware-driven error report. Some of those |
| provide a BIOS-driven error report mechanism via ACPI, using the |
| APEI/GHES driver. By enabling this option, the error reports provided |
| by GHES are sent to userspace via the EDAC API. |
| |
| When this option is enabled, it will disable the hardware-driven |
| mechanisms, if a GHES BIOS is detected, entering into the |
| "Firmware First" mode. |
| |
| It should be noticed that keeping both GHES and a hardware-driven |
| error mechanism won't work well, as BIOS will race with OS, while |
| reading the error registers. So, if you want to not use "Firmware |
| first" GHES error mechanism, you should disable GHES either at |
| compilation time or by passing "ghes.disable=1" Kernel parameter |
| at boot time. |
| |
| In doubt, say 'Y'. |
| |
| config EDAC_AMD64 |
| tristate "AMD64 (Opteron, Athlon64)" |
| depends on AMD_NB && EDAC_DECODE_MCE |
| help |
| Support for error detection and correction of DRAM ECC errors on |
| the AMD64 families (>= K8) of memory controllers. |
| |
| config EDAC_AMD64_ERROR_INJECTION |
| bool "Sysfs HW Error injection facilities" |
| depends on EDAC_AMD64 |
| help |
| Recent Opterons (Family 10h and later) provide for Memory Error |
| Injection into the ECC detection circuits. The amd64_edac module |
| allows the operator/user to inject Uncorrectable and Correctable |
| errors into DRAM. |
| |
| When enabled, in each of the respective memory controller directories |
| (/sys/devices/system/edac/mc/mcX), there are 3 input files: |
| |
| - inject_section (0..3, 16-byte section of 64-byte cacheline), |
| - inject_word (0..8, 16-bit word of 16-byte section), |
| - inject_ecc_vector (hex ecc vector: select bits of inject word) |
| |
| In addition, there are two control files, inject_read and inject_write, |
| which trigger the DRAM ECC Read and Write respectively. |
| |
| config EDAC_AL_MC |
| tristate "Amazon's Annapurna Lab Memory Controller" |
| depends on (ARCH_ALPINE || COMPILE_TEST) |
| help |
| Support for error detection and correction for Amazon's Annapurna |
| Labs Alpine chips which allow 1 bit correction and 2 bits detection. |
| |
| config EDAC_AMD76X |
| tristate "AMD 76x (760, 762, 768)" |
| depends on PCI && X86_32 |
| help |
| Support for error detection and correction on the AMD 76x |
| series of chipsets used with the Athlon processor. |
| |
| config EDAC_E7XXX |
| tristate "Intel e7xxx (e7205, e7500, e7501, e7505)" |
| depends on PCI && X86_32 |
| help |
| Support for error detection and correction on the Intel |
| E7205, E7500, E7501 and E7505 server chipsets. |
| |
| config EDAC_E752X |
| tristate "Intel e752x (e7520, e7525, e7320) and 3100" |
| depends on PCI && X86 |
| help |
| Support for error detection and correction on the Intel |
| E7520, E7525, E7320 server chipsets. |
| |
| config EDAC_I82443BXGX |
| tristate "Intel 82443BX/GX (440BX/GX)" |
| depends on PCI && X86_32 |
| depends on BROKEN |
| help |
| Support for error detection and correction on the Intel |
| 82443BX/GX memory controllers (440BX/GX chipsets). |
| |
| config EDAC_I82875P |
| tristate "Intel 82875p (D82875P, E7210)" |
| depends on PCI && X86_32 |
| help |
| Support for error detection and correction on the Intel |
| DP82785P and E7210 server chipsets. |
| |
| config EDAC_I82975X |
| tristate "Intel 82975x (D82975x)" |
| depends on PCI && X86 |
| help |
| Support for error detection and correction on the Intel |
| DP82975x server chipsets. |
| |
| config EDAC_I3000 |
| tristate "Intel 3000/3010" |
| depends on PCI && X86 |
| help |
| Support for error detection and correction on the Intel |
| 3000 and 3010 server chipsets. |
| |
| config EDAC_I3200 |
| tristate "Intel 3200" |
| depends on PCI && X86 |
| help |
| Support for error detection and correction on the Intel |
| 3200 and 3210 server chipsets. |
| |
| config EDAC_IE31200 |
| tristate "Intel e312xx" |
| depends on PCI && X86 |
| help |
| Support for error detection and correction on the Intel |
| E3-1200 based DRAM controllers. |
| |
| config EDAC_X38 |
| tristate "Intel X38" |
| depends on PCI && X86 |
| help |
| Support for error detection and correction on the Intel |
| X38 server chipsets. |
| |
| config EDAC_I5400 |
| tristate "Intel 5400 (Seaburg) chipsets" |
| depends on PCI && X86 |
| help |
| Support for error detection and correction the Intel |
| i5400 MCH chipset (Seaburg). |
| |
| config EDAC_I7CORE |
| tristate "Intel i7 Core (Nehalem) processors" |
| depends on PCI && X86 && X86_MCE_INTEL |
| help |
| Support for error detection and correction the Intel |
| i7 Core (Nehalem) Integrated Memory Controller that exists on |
| newer processors like i7 Core, i7 Core Extreme, Xeon 35xx |
| and Xeon 55xx processors. |
| |
| config EDAC_I82860 |
| tristate "Intel 82860" |
| depends on PCI && X86_32 |
| help |
| Support for error detection and correction on the Intel |
| 82860 chipset. |
| |
| config EDAC_R82600 |
| tristate "Radisys 82600 embedded chipset" |
| depends on PCI && X86_32 |
| help |
| Support for error detection and correction on the Radisys |
| 82600 embedded chipset. |
| |
| config EDAC_I5000 |
| tristate "Intel Greencreek/Blackford chipset" |
| depends on X86 && PCI |
| help |
| Support for error detection and correction the Intel |
| Greekcreek/Blackford chipsets. |
| |
| config EDAC_I5100 |
| tristate "Intel San Clemente MCH" |
| depends on X86 && PCI |
| help |
| Support for error detection and correction the Intel |
| San Clemente MCH. |
| |
| config EDAC_I7300 |
| tristate "Intel Clarksboro MCH" |
| depends on X86 && PCI |
| help |
| Support for error detection and correction the Intel |
| Clarksboro MCH (Intel 7300 chipset). |
| |
| config EDAC_SBRIDGE |
| tristate "Intel Sandy-Bridge/Ivy-Bridge/Haswell Integrated MC" |
| depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG |
| help |
| Support for error detection and correction the Intel |
| Sandy Bridge, Ivy Bridge and Haswell Integrated Memory Controllers. |
| |
| config EDAC_SKX |
| tristate "Intel Skylake server Integrated MC" |
| depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI |
| depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_SKX can't be y |
| select DMI |
| select ACPI_ADXL |
| help |
| Support for error detection and correction the Intel |
| Skylake server Integrated Memory Controllers. If your |
| system has non-volatile DIMMs you should also manually |
| select CONFIG_ACPI_NFIT. |
| |
| config EDAC_I10NM |
| tristate "Intel 10nm server Integrated MC" |
| depends on PCI && X86_64 && X86_MCE_INTEL && PCI_MMCONFIG && ACPI |
| depends on ACPI_NFIT || !ACPI_NFIT # if ACPI_NFIT=m, EDAC_I10NM can't be y |
| select DMI |
| select ACPI_ADXL |
| help |
| Support for error detection and correction the Intel |
| 10nm server Integrated Memory Controllers. If your |
| system has non-volatile DIMMs you should also manually |
| select CONFIG_ACPI_NFIT. |
| |
| config EDAC_PND2 |
| tristate "Intel Pondicherry2" |
| depends on PCI && X86_64 && X86_MCE_INTEL |
| help |
| Support for error detection and correction on the Intel |
| Pondicherry2 Integrated Memory Controller. This SoC IP is |
| first used on the Apollo Lake platform and Denverton |
| micro-server but may appear on others in the future. |
| |
| config EDAC_IGEN6 |
| tristate "Intel client SoC Integrated MC" |
| depends on PCI && X86_64 && PCI_MMCONFIG && ARCH_HAVE_NMI_SAFE_CMPXCHG |
| help |
| Support for error detection and correction on the Intel |
| client SoC Integrated Memory Controller using In-Band ECC IP. |
| This In-Band ECC is first used on the Elkhart Lake SoC but |
| may appear on others in the future. |
| |
| config EDAC_MPC85XX |
| bool "Freescale MPC83xx / MPC85xx" |
| depends on FSL_SOC && EDAC=y |
| help |
| Support for error detection and correction on the Freescale |
| MPC8349, MPC8560, MPC8540, MPC8548, T4240 |
| |
| config EDAC_LAYERSCAPE |
| tristate "Freescale Layerscape DDR" |
| depends on ARCH_LAYERSCAPE || SOC_LS1021A |
| help |
| Support for error detection and correction on Freescale memory |
| controllers on Layerscape SoCs. |
| |
| config EDAC_PASEMI |
| tristate "PA Semi PWRficient" |
| depends on PPC_PASEMI && PCI |
| help |
| Support for error detection and correction on PA Semi |
| PWRficient. |
| |
| config EDAC_CELL |
| tristate "Cell Broadband Engine memory controller" |
| depends on PPC_CELL_COMMON |
| help |
| Support for error detection and correction on the |
| Cell Broadband Engine internal memory controller |
| on platform without a hypervisor |
| |
| config EDAC_PPC4XX |
| tristate "PPC4xx IBM DDR2 Memory Controller" |
| depends on 4xx |
| help |
| This enables support for EDAC on the ECC memory used |
| with the IBM DDR2 memory controller found in various |
| PowerPC 4xx embedded processors such as the 405EX[r], |
| 440SP, 440SPe, 460EX, 460GT and 460SX. |
| |
| config EDAC_AMD8131 |
| tristate "AMD8131 HyperTransport PCI-X Tunnel" |
| depends on PCI && PPC_MAPLE |
| help |
| Support for error detection and correction on the |
| AMD8131 HyperTransport PCI-X Tunnel chip. |
| Note, add more Kconfig dependency if it's adopted |
| on some machine other than Maple. |
| |
| config EDAC_AMD8111 |
| tristate "AMD8111 HyperTransport I/O Hub" |
| depends on PCI && PPC_MAPLE |
| help |
| Support for error detection and correction on the |
| AMD8111 HyperTransport I/O Hub chip. |
| Note, add more Kconfig dependency if it's adopted |
| on some machine other than Maple. |
| |
| config EDAC_CPC925 |
| tristate "IBM CPC925 Memory Controller (PPC970FX)" |
| depends on PPC64 |
| help |
| Support for error detection and correction on the |
| IBM CPC925 Bridge and Memory Controller, which is |
| a companion chip to the PowerPC 970 family of |
| processors. |
| |
| config EDAC_HIGHBANK_MC |
| tristate "Highbank Memory Controller" |
| depends on ARCH_HIGHBANK |
| help |
| Support for error detection and correction on the |
| Calxeda Highbank memory controller. |
| |
| config EDAC_HIGHBANK_L2 |
| tristate "Highbank L2 Cache" |
| depends on ARCH_HIGHBANK |
| help |
| Support for error detection and correction on the |
| Calxeda Highbank memory controller. |
| |
| config EDAC_OCTEON_PC |
| tristate "Cavium Octeon Primary Caches" |
| depends on CPU_CAVIUM_OCTEON |
| help |
| Support for error detection and correction on the primary caches of |
| the cnMIPS cores of Cavium Octeon family SOCs. |
| |
| config EDAC_OCTEON_L2C |
| tristate "Cavium Octeon Secondary Caches (L2C)" |
| depends on CAVIUM_OCTEON_SOC |
| help |
| Support for error detection and correction on the |
| Cavium Octeon family of SOCs. |
| |
| config EDAC_OCTEON_LMC |
| tristate "Cavium Octeon DRAM Memory Controller (LMC)" |
| depends on CAVIUM_OCTEON_SOC |
| help |
| Support for error detection and correction on the |
| Cavium Octeon family of SOCs. |
| |
| config EDAC_OCTEON_PCI |
| tristate "Cavium Octeon PCI Controller" |
| depends on PCI && CAVIUM_OCTEON_SOC |
| help |
| Support for error detection and correction on the |
| Cavium Octeon family of SOCs. |
| |
| config EDAC_THUNDERX |
| tristate "Cavium ThunderX EDAC" |
| depends on ARM64 |
| depends on PCI |
| help |
| Support for error detection and correction on the |
| Cavium ThunderX memory controllers (LMC), Cache |
| Coherent Processor Interconnect (CCPI) and L2 cache |
| blocks (TAD, CBC, MCI). |
| |
| config EDAC_ALTERA |
| bool "Altera SOCFPGA ECC" |
| depends on EDAC=y && (ARCH_SOCFPGA || ARCH_STRATIX10) |
| help |
| Support for error detection and correction on the |
| Altera SOCs. This is the global enable for the |
| various Altera peripherals. |
| |
| config EDAC_ALTERA_SDRAM |
| bool "Altera SDRAM ECC" |
| depends on EDAC_ALTERA=y |
| help |
| Support for error detection and correction on the |
| Altera SDRAM Memory for Altera SoCs. Note that the |
| preloader must initialize the SDRAM before loading |
| the kernel. |
| |
| config EDAC_ALTERA_L2C |
| bool "Altera L2 Cache ECC" |
| depends on EDAC_ALTERA=y && CACHE_L2X0 |
| help |
| Support for error detection and correction on the |
| Altera L2 cache Memory for Altera SoCs. This option |
| requires L2 cache. |
| |
| config EDAC_ALTERA_OCRAM |
| bool "Altera On-Chip RAM ECC" |
| depends on EDAC_ALTERA=y && SRAM && GENERIC_ALLOCATOR |
| help |
| Support for error detection and correction on the |
| Altera On-Chip RAM Memory for Altera SoCs. |
| |
| config EDAC_ALTERA_ETHERNET |
| bool "Altera Ethernet FIFO ECC" |
| depends on EDAC_ALTERA=y |
| help |
| Support for error detection and correction on the |
| Altera Ethernet FIFO Memory for Altera SoCs. |
| |
| config EDAC_ALTERA_NAND |
| bool "Altera NAND FIFO ECC" |
| depends on EDAC_ALTERA=y && MTD_NAND_DENALI |
| help |
| Support for error detection and correction on the |
| Altera NAND FIFO Memory for Altera SoCs. |
| |
| config EDAC_ALTERA_DMA |
| bool "Altera DMA FIFO ECC" |
| depends on EDAC_ALTERA=y && PL330_DMA=y |
| help |
| Support for error detection and correction on the |
| Altera DMA FIFO Memory for Altera SoCs. |
| |
| config EDAC_ALTERA_USB |
| bool "Altera USB FIFO ECC" |
| depends on EDAC_ALTERA=y && USB_DWC2 |
| help |
| Support for error detection and correction on the |
| Altera USB FIFO Memory for Altera SoCs. |
| |
| config EDAC_ALTERA_QSPI |
| bool "Altera QSPI FIFO ECC" |
| depends on EDAC_ALTERA=y && SPI_CADENCE_QUADSPI |
| help |
| Support for error detection and correction on the |
| Altera QSPI FIFO Memory for Altera SoCs. |
| |
| config EDAC_ALTERA_SDMMC |
| bool "Altera SDMMC FIFO ECC" |
| depends on EDAC_ALTERA=y && MMC_DW |
| help |
| Support for error detection and correction on the |
| Altera SDMMC FIFO Memory for Altera SoCs. |
| |
| config EDAC_SIFIVE |
| bool "Sifive platform EDAC driver" |
| depends on EDAC=y && SIFIVE_L2 |
| help |
| Support for error detection and correction on the SiFive SoCs. |
| |
| config EDAC_ARMADA_XP |
| bool "Marvell Armada XP DDR and L2 Cache ECC" |
| depends on MACH_MVEBU_V7 |
| help |
| Support for error correction and detection on the Marvell Aramada XP |
| DDR RAM and L2 cache controllers. |
| |
| config EDAC_SYNOPSYS |
| tristate "Synopsys DDR Memory Controller" |
| depends on ARCH_ZYNQ || ARCH_ZYNQMP |
| help |
| Support for error detection and correction on the Synopsys DDR |
| memory controller. |
| |
| config EDAC_XGENE |
| tristate "APM X-Gene SoC" |
| depends on (ARM64 || COMPILE_TEST) |
| help |
| Support for error detection and correction on the |
| APM X-Gene family of SOCs. |
| |
| config EDAC_TI |
| tristate "Texas Instruments DDR3 ECC Controller" |
| depends on ARCH_KEYSTONE || SOC_DRA7XX |
| help |
| Support for error detection and correction on the TI SoCs. |
| |
| config EDAC_QCOM |
| tristate "QCOM EDAC Controller" |
| depends on ARCH_QCOM && QCOM_LLCC |
| help |
| Support for error detection and correction on the |
| Qualcomm Technologies, Inc. SoCs. |
| |
| This driver reports Single Bit Errors (SBEs) and Double Bit Errors (DBEs). |
| As of now, it supports error reporting for Last Level Cache Controller (LLCC) |
| of Tag RAM and Data RAM. |
| |
| For debugging issues having to do with stability and overall system |
| health, you should probably say 'Y' here. |
| |
| config EDAC_ASPEED |
| tristate "Aspeed AST BMC SoC" |
| depends on ARCH_ASPEED |
| help |
| Support for error detection and correction on the Aspeed AST BMC SoC. |
| |
| First, ECC must be configured in the bootloader. Then, this driver |
| will expose error counters via the EDAC kernel framework. |
| |
| config EDAC_BLUEFIELD |
| tristate "Mellanox BlueField Memory ECC" |
| depends on ARM64 && ((MELLANOX_PLATFORM && ACPI) || COMPILE_TEST) |
| help |
| Support for error detection and correction on the |
| Mellanox BlueField SoCs. |
| |
| config EDAC_DMC520 |
| tristate "ARM DMC-520 ECC" |
| depends on ARM64 |
| help |
| Support for error detection and correction on the |
| SoCs with ARM DMC-520 DRAM controller. |
| |
| endif # EDAC |
