| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * FSP-2 board specific routines |
| * |
| * Based on earlier code: |
| * Matt Porter <mporter@kernel.crashing.org> |
| * Copyright 2002-2005 MontaVista Software Inc. |
| * |
| * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> |
| * Copyright (c) 2003-2005 Zultys Technologies |
| * |
| * Rewritten and ported to the merged powerpc tree: |
| * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. |
| */ |
| |
| #include <linux/init.h> |
| #include <linux/of_platform.h> |
| #include <linux/rtc.h> |
| |
| #include <asm/machdep.h> |
| #include <asm/prom.h> |
| #include <asm/udbg.h> |
| #include <asm/time.h> |
| #include <asm/uic.h> |
| #include <asm/ppc4xx.h> |
| #include <asm/dcr.h> |
| #include <linux/interrupt.h> |
| #include <linux/of_irq.h> |
| #include "fsp2.h" |
| |
| #define FSP2_BUS_ERR "ibm,bus-error-irq" |
| #define FSP2_CMU_ERR "ibm,cmu-error-irq" |
| #define FSP2_CONF_ERR "ibm,conf-error-irq" |
| #define FSP2_OPBD_ERR "ibm,opbd-error-irq" |
| #define FSP2_MCUE "ibm,mc-ue-irq" |
| #define FSP2_RST_WRN "ibm,reset-warning-irq" |
| |
| static __initdata struct of_device_id fsp2_of_bus[] = { |
| { .compatible = "ibm,plb4", }, |
| { .compatible = "ibm,plb6", }, |
| { .compatible = "ibm,opb", }, |
| {}, |
| }; |
| |
| static void l2regs(void) |
| { |
| pr_err("L2 Controller:\n"); |
| pr_err("MCK: 0x%08x\n", mfl2(L2MCK)); |
| pr_err("INT: 0x%08x\n", mfl2(L2INT)); |
| pr_err("PLBSTAT0: 0x%08x\n", mfl2(L2PLBSTAT0)); |
| pr_err("PLBSTAT1: 0x%08x\n", mfl2(L2PLBSTAT1)); |
| pr_err("ARRSTAT0: 0x%08x\n", mfl2(L2ARRSTAT0)); |
| pr_err("ARRSTAT1: 0x%08x\n", mfl2(L2ARRSTAT1)); |
| pr_err("ARRSTAT2: 0x%08x\n", mfl2(L2ARRSTAT2)); |
| pr_err("CPUSTAT: 0x%08x\n", mfl2(L2CPUSTAT)); |
| pr_err("RACSTAT0: 0x%08x\n", mfl2(L2RACSTAT0)); |
| pr_err("WACSTAT0: 0x%08x\n", mfl2(L2WACSTAT0)); |
| pr_err("WACSTAT1: 0x%08x\n", mfl2(L2WACSTAT1)); |
| pr_err("WACSTAT2: 0x%08x\n", mfl2(L2WACSTAT2)); |
| pr_err("WDFSTAT: 0x%08x\n", mfl2(L2WDFSTAT)); |
| pr_err("LOG0: 0x%08x\n", mfl2(L2LOG0)); |
| pr_err("LOG1: 0x%08x\n", mfl2(L2LOG1)); |
| pr_err("LOG2: 0x%08x\n", mfl2(L2LOG2)); |
| pr_err("LOG3: 0x%08x\n", mfl2(L2LOG3)); |
| pr_err("LOG4: 0x%08x\n", mfl2(L2LOG4)); |
| pr_err("LOG5: 0x%08x\n", mfl2(L2LOG5)); |
| } |
| |
| static void show_plbopb_regs(u32 base, int num) |
| { |
| pr_err("\nPLBOPB Bridge %d:\n", num); |
| pr_err("GESR0: 0x%08x\n", mfdcr(base + PLB4OPB_GESR0)); |
| pr_err("GESR1: 0x%08x\n", mfdcr(base + PLB4OPB_GESR1)); |
| pr_err("GESR2: 0x%08x\n", mfdcr(base + PLB4OPB_GESR2)); |
| pr_err("GEARU: 0x%08x\n", mfdcr(base + PLB4OPB_GEARU)); |
| pr_err("GEAR: 0x%08x\n", mfdcr(base + PLB4OPB_GEAR)); |
| } |
| |
| static irqreturn_t bus_err_handler(int irq, void *data) |
| { |
| pr_err("Bus Error\n"); |
| |
| l2regs(); |
| |
| pr_err("\nPLB6 Controller:\n"); |
| pr_err("BC_SHD: 0x%08x\n", mfdcr(DCRN_PLB6_SHD)); |
| pr_err("BC_ERR: 0x%08x\n", mfdcr(DCRN_PLB6_ERR)); |
| |
| pr_err("\nPLB6-to-PLB4 Bridge:\n"); |
| pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_ESR)); |
| pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARH)); |
| pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB6PLB4_EARL)); |
| |
| pr_err("\nPLB4-to-PLB6 Bridge:\n"); |
| pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_ESR)); |
| pr_err("EARH: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARH)); |
| pr_err("EARL: 0x%08x\n", mfdcr(DCRN_PLB4PLB6_EARL)); |
| |
| pr_err("\nPLB6-to-MCIF Bridge:\n"); |
| pr_err("BESR0: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR0)); |
| pr_err("BESR1: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BESR1)); |
| pr_err("BEARH: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARH)); |
| pr_err("BEARL: 0x%08x\n", mfdcr(DCRN_PLB6MCIF_BEARL)); |
| |
| pr_err("\nPLB4 Arbiter:\n"); |
| pr_err("P0ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRH)); |
| pr_err("P0ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P0ESRL)); |
| pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH)); |
| pr_err("P0EARH 0x%08x\n", mfdcr(DCRN_PLB4_P0EARH)); |
| pr_err("P1ESRH 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRH)); |
| pr_err("P1ESRL 0x%08x\n", mfdcr(DCRN_PLB4_P1ESRL)); |
| pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH)); |
| pr_err("P1EARH 0x%08x\n", mfdcr(DCRN_PLB4_P1EARH)); |
| |
| show_plbopb_regs(DCRN_PLB4OPB0_BASE, 0); |
| show_plbopb_regs(DCRN_PLB4OPB1_BASE, 1); |
| show_plbopb_regs(DCRN_PLB4OPB2_BASE, 2); |
| show_plbopb_regs(DCRN_PLB4OPB3_BASE, 3); |
| |
| pr_err("\nPLB4-to-AHB Bridge:\n"); |
| pr_err("ESR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_ESR)); |
| pr_err("SEUAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SEUAR)); |
| pr_err("SELAR: 0x%08x\n", mfdcr(DCRN_PLB4AHB_SELAR)); |
| |
| pr_err("\nAHB-to-PLB4 Bridge:\n"); |
| pr_err("\nESR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_ESR)); |
| pr_err("\nEAR: 0x%08x\n", mfdcr(DCRN_AHBPLB4_EAR)); |
| panic("Bus Error\n"); |
| } |
| |
| static irqreturn_t cmu_err_handler(int irq, void *data) { |
| pr_err("CMU Error\n"); |
| pr_err("FIR0: 0x%08x\n", mfcmu(CMUN_FIR0)); |
| panic("CMU Error\n"); |
| } |
| |
| static irqreturn_t conf_err_handler(int irq, void *data) { |
| pr_err("Configuration Logic Error\n"); |
| pr_err("CONF_FIR: 0x%08x\n", mfdcr(DCRN_CONF_FIR_RWC)); |
| pr_err("RPERR0: 0x%08x\n", mfdcr(DCRN_CONF_RPERR0)); |
| pr_err("RPERR1: 0x%08x\n", mfdcr(DCRN_CONF_RPERR1)); |
| panic("Configuration Logic Error\n"); |
| } |
| |
| static irqreturn_t opbd_err_handler(int irq, void *data) { |
| panic("OPBD Error\n"); |
| } |
| |
| static irqreturn_t mcue_handler(int irq, void *data) { |
| pr_err("DDR: Uncorrectable Error\n"); |
| pr_err("MCSTAT: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCSTAT)); |
| pr_err("MCOPT1: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCOPT1)); |
| pr_err("MCOPT2: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_MCOPT2)); |
| pr_err("PHYSTAT: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_PHYSTAT)); |
| pr_err("CFGR0: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR0)); |
| pr_err("CFGR1: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR1)); |
| pr_err("CFGR2: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR2)); |
| pr_err("CFGR3: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_CFGR3)); |
| pr_err("SCRUB_CNTL: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_SCRUB_CNTL)); |
| pr_err("ECCERR_PORT0: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_PORT0)); |
| pr_err("ECCERR_ADDR_PORT0: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_ADDR_PORT0)); |
| pr_err("ECCERR_CNT_PORT0: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECCERR_COUNT_PORT0)); |
| pr_err("ECC_CHECK_PORT0: 0x%08x\n", |
| mfdcr(DCRN_DDR34_BASE + DCRN_DDR34_ECC_CHECK_PORT0)); |
| pr_err("MCER0: 0x%08x\n", |
| mfdcr(DCRN_CW_BASE + DCRN_CW_MCER0)); |
| pr_err("MCER1: 0x%08x\n", |
| mfdcr(DCRN_CW_BASE + DCRN_CW_MCER1)); |
| pr_err("BESR: 0x%08x\n", |
| mfdcr(DCRN_PLB6MCIF_BESR0)); |
| pr_err("BEARL: 0x%08x\n", |
| mfdcr(DCRN_PLB6MCIF_BEARL)); |
| pr_err("BEARH: 0x%08x\n", |
| mfdcr(DCRN_PLB6MCIF_BEARH)); |
| panic("DDR: Uncorrectable Error\n"); |
| } |
| |
| static irqreturn_t rst_wrn_handler(int irq, void *data) { |
| u32 crcs = mfcmu(CMUN_CRCS); |
| switch (crcs & CRCS_STAT_MASK) { |
| case CRCS_STAT_CHIP_RST_B: |
| panic("Received chassis-initiated reset request"); |
| default: |
| panic("Unknown external reset: CRCS=0x%x", crcs); |
| } |
| } |
| |
| static void node_irq_request(const char *compat, irq_handler_t errirq_handler) |
| { |
| struct device_node *np; |
| unsigned int irq; |
| int32_t rc; |
| |
| for_each_compatible_node(np, NULL, compat) { |
| irq = irq_of_parse_and_map(np, 0); |
| if (irq == NO_IRQ) { |
| pr_err("device tree node %pOFn is missing a interrupt", |
| np); |
| of_node_put(np); |
| return; |
| } |
| |
| rc = request_irq(irq, errirq_handler, 0, np->name, np); |
| if (rc) { |
| pr_err("fsp_of_probe: request_irq failed: np=%pOF rc=%d", |
| np, rc); |
| of_node_put(np); |
| return; |
| } |
| } |
| } |
| |
| static void critical_irq_setup(void) |
| { |
| node_irq_request(FSP2_CMU_ERR, cmu_err_handler); |
| node_irq_request(FSP2_BUS_ERR, bus_err_handler); |
| node_irq_request(FSP2_CONF_ERR, conf_err_handler); |
| node_irq_request(FSP2_OPBD_ERR, opbd_err_handler); |
| node_irq_request(FSP2_MCUE, mcue_handler); |
| node_irq_request(FSP2_RST_WRN, rst_wrn_handler); |
| } |
| |
| static int __init fsp2_device_probe(void) |
| { |
| of_platform_bus_probe(NULL, fsp2_of_bus, NULL); |
| return 0; |
| } |
| machine_device_initcall(fsp2, fsp2_device_probe); |
| |
| static int __init fsp2_probe(void) |
| { |
| u32 val; |
| unsigned long root = of_get_flat_dt_root(); |
| |
| if (!of_flat_dt_is_compatible(root, "ibm,fsp2")) |
| return 0; |
| |
| /* Clear BC_ERR and mask snoopable request plb errors. */ |
| val = mfdcr(DCRN_PLB6_CR0); |
| val |= 0x20000000; |
| mtdcr(DCRN_PLB6_BASE, val); |
| mtdcr(DCRN_PLB6_HD, 0xffff0000); |
| mtdcr(DCRN_PLB6_SHD, 0xffff0000); |
| |
| /* TVSENSE reset is blocked (clock gated) by the POR default of the TVS |
| * sleep config bit. As a consequence, TVSENSE will provide erratic |
| * sensor values, which may result in spurious (parity) errors |
| * recorded in the CMU FIR and leading to erroneous interrupt requests |
| * once the CMU interrupt is unmasked. |
| */ |
| |
| /* 1. set TVS1[UNDOZE] */ |
| val = mfcmu(CMUN_TVS1); |
| val |= 0x4; |
| mtcmu(CMUN_TVS1, val); |
| |
| /* 2. clear FIR[TVS] and FIR[TVSPAR] */ |
| val = mfcmu(CMUN_FIR0); |
| val |= 0x30000000; |
| mtcmu(CMUN_FIR0, val); |
| |
| /* L2 machine checks */ |
| mtl2(L2PLBMCKEN0, 0xffffffff); |
| mtl2(L2PLBMCKEN1, 0x0000ffff); |
| mtl2(L2ARRMCKEN0, 0xffffffff); |
| mtl2(L2ARRMCKEN1, 0xffffffff); |
| mtl2(L2ARRMCKEN2, 0xfffff000); |
| mtl2(L2CPUMCKEN, 0xffffffff); |
| mtl2(L2RACMCKEN0, 0xffffffff); |
| mtl2(L2WACMCKEN0, 0xffffffff); |
| mtl2(L2WACMCKEN1, 0xffffffff); |
| mtl2(L2WACMCKEN2, 0xffffffff); |
| mtl2(L2WDFMCKEN, 0xffffffff); |
| |
| /* L2 interrupts */ |
| mtl2(L2PLBINTEN1, 0xffff0000); |
| |
| /* |
| * At a global level, enable all L2 machine checks and interrupts |
| * reported by the L2 subsystems, except for the external machine check |
| * input (UIC0.1). |
| */ |
| mtl2(L2MCKEN, 0x000007ff); |
| mtl2(L2INTEN, 0x000004ff); |
| |
| /* Enable FSP-2 configuration logic parity errors */ |
| mtdcr(DCRN_CONF_EIR_RS, 0x80000000); |
| return 1; |
| } |
| |
| static void __init fsp2_irq_init(void) |
| { |
| uic_init_tree(); |
| critical_irq_setup(); |
| } |
| |
| define_machine(fsp2) { |
| .name = "FSP-2", |
| .probe = fsp2_probe, |
| .progress = udbg_progress, |
| .init_IRQ = fsp2_irq_init, |
| .get_irq = uic_get_irq, |
| .restart = ppc4xx_reset_system, |
| .calibrate_decr = generic_calibrate_decr, |
| }; |