| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* |
| * Copyright (C) 2020 Linaro Ltd |
| */ |
| |
| #ifndef __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H |
| #define __DRIVERS_INTERCONNECT_QCOM_ICC_RPM_H |
| |
| #define RPM_BUS_MASTER_REQ 0x73616d62 |
| #define RPM_BUS_SLAVE_REQ 0x766c7362 |
| |
| #define to_qcom_provider(_provider) \ |
| container_of(_provider, struct qcom_icc_provider, provider) |
| |
| /** |
| * struct qcom_icc_provider - Qualcomm specific interconnect provider |
| * @provider: generic interconnect provider |
| * @bus_clks: the clk_bulk_data table of bus clocks |
| * @num_clks: the total number of clk_bulk_data entries |
| * @is_bimc_node: indicates whether to use bimc specific setting |
| * @qos_offset: offset to QoS registers |
| * @regmap: regmap for QoS registers read/write access |
| */ |
| struct qcom_icc_provider { |
| struct icc_provider provider; |
| int num_clks; |
| bool is_bimc_node; |
| struct regmap *regmap; |
| unsigned int qos_offset; |
| struct clk_bulk_data bus_clks[]; |
| }; |
| |
| /** |
| * struct qcom_icc_qos - Qualcomm specific interconnect QoS parameters |
| * @areq_prio: node requests priority |
| * @prio_level: priority level for bus communication |
| * @limit_commands: activate/deactivate limiter mode during runtime |
| * @ap_owned: indicates if the node is owned by the AP or by the RPM |
| * @qos_mode: default qos mode for this node |
| * @qos_port: qos port number for finding qos registers of this node |
| */ |
| struct qcom_icc_qos { |
| u32 areq_prio; |
| u32 prio_level; |
| bool limit_commands; |
| bool ap_owned; |
| int qos_mode; |
| int qos_port; |
| }; |
| |
| /** |
| * struct qcom_icc_node - Qualcomm specific interconnect nodes |
| * @name: the node name used in debugfs |
| * @id: a unique node identifier |
| * @links: an array of nodes where we can go next while traversing |
| * @num_links: the total number of @links |
| * @buswidth: width of the interconnect between a node and the bus (bytes) |
| * @mas_rpm_id: RPM id for devices that are bus masters |
| * @slv_rpm_id: RPM id for devices that are bus slaves |
| * @qos: NoC QoS setting parameters |
| * @rate: current bus clock rate in Hz |
| */ |
| struct qcom_icc_node { |
| unsigned char *name; |
| u16 id; |
| const u16 *links; |
| u16 num_links; |
| u16 buswidth; |
| int mas_rpm_id; |
| int slv_rpm_id; |
| struct qcom_icc_qos qos; |
| u64 rate; |
| }; |
| |
| struct qcom_icc_desc { |
| struct qcom_icc_node **nodes; |
| size_t num_nodes; |
| const char * const *clocks; |
| size_t num_clocks; |
| bool is_bimc_node; |
| const struct regmap_config *regmap_cfg; |
| unsigned int qos_offset; |
| }; |
| |
| /* Valid for both NoC and BIMC */ |
| #define NOC_QOS_MODE_INVALID -1 |
| #define NOC_QOS_MODE_FIXED 0x0 |
| #define NOC_QOS_MODE_BYPASS 0x2 |
| |
| int qnoc_probe(struct platform_device *pdev); |
| int qnoc_remove(struct platform_device *pdev); |
| |
| #endif |