| /* SPDX-License-Identifier: GPL-2.0-only */ |
| /* |
| * |
| * Copyright (c) 2011, Microsoft Corporation. |
| * |
| * Authors: |
| * Haiyang Zhang <haiyangz@microsoft.com> |
| * Hank Janssen <hjanssen@microsoft.com> |
| * K. Y. Srinivasan <kys@microsoft.com> |
| */ |
| |
| #ifndef _HYPERV_VMBUS_H |
| #define _HYPERV_VMBUS_H |
| |
| #include <linux/list.h> |
| #include <asm/sync_bitops.h> |
| #include <asm/hyperv-tlfs.h> |
| #include <linux/atomic.h> |
| #include <linux/hyperv.h> |
| #include <linux/interrupt.h> |
| |
| #include "hv_trace.h" |
| |
| /* |
| * Timeout for services such as KVP and fcopy. |
| */ |
| #define HV_UTIL_TIMEOUT 30 |
| |
| /* |
| * Timeout for guest-host handshake for services. |
| */ |
| #define HV_UTIL_NEGO_TIMEOUT 55 |
| |
| |
| /* Definitions for the monitored notification facility */ |
| union hv_monitor_trigger_group { |
| u64 as_uint64; |
| struct { |
| u32 pending; |
| u32 armed; |
| }; |
| }; |
| |
| struct hv_monitor_parameter { |
| union hv_connection_id connectionid; |
| u16 flagnumber; |
| u16 rsvdz; |
| }; |
| |
| union hv_monitor_trigger_state { |
| u32 asu32; |
| |
| struct { |
| u32 group_enable:4; |
| u32 rsvdz:28; |
| }; |
| }; |
| |
| /* struct hv_monitor_page Layout */ |
| /* ------------------------------------------------------ */ |
| /* | 0 | TriggerState (4 bytes) | Rsvd1 (4 bytes) | */ |
| /* | 8 | TriggerGroup[0] | */ |
| /* | 10 | TriggerGroup[1] | */ |
| /* | 18 | TriggerGroup[2] | */ |
| /* | 20 | TriggerGroup[3] | */ |
| /* | 28 | Rsvd2[0] | */ |
| /* | 30 | Rsvd2[1] | */ |
| /* | 38 | Rsvd2[2] | */ |
| /* | 40 | NextCheckTime[0][0] | NextCheckTime[0][1] | */ |
| /* | ... | */ |
| /* | 240 | Latency[0][0..3] | */ |
| /* | 340 | Rsvz3[0] | */ |
| /* | 440 | Parameter[0][0] | */ |
| /* | 448 | Parameter[0][1] | */ |
| /* | ... | */ |
| /* | 840 | Rsvd4[0] | */ |
| /* ------------------------------------------------------ */ |
| struct hv_monitor_page { |
| union hv_monitor_trigger_state trigger_state; |
| u32 rsvdz1; |
| |
| union hv_monitor_trigger_group trigger_group[4]; |
| u64 rsvdz2[3]; |
| |
| s32 next_checktime[4][32]; |
| |
| u16 latency[4][32]; |
| u64 rsvdz3[32]; |
| |
| struct hv_monitor_parameter parameter[4][32]; |
| |
| u8 rsvdz4[1984]; |
| }; |
| |
| #define HV_HYPERCALL_PARAM_ALIGN sizeof(u64) |
| |
| /* Definition of the hv_post_message hypercall input structure. */ |
| struct hv_input_post_message { |
| union hv_connection_id connectionid; |
| u32 reserved; |
| u32 message_type; |
| u32 payload_size; |
| u64 payload[HV_MESSAGE_PAYLOAD_QWORD_COUNT]; |
| }; |
| |
| |
| enum { |
| VMBUS_MESSAGE_CONNECTION_ID = 1, |
| VMBUS_MESSAGE_CONNECTION_ID_4 = 4, |
| VMBUS_MESSAGE_PORT_ID = 1, |
| VMBUS_EVENT_CONNECTION_ID = 2, |
| VMBUS_EVENT_PORT_ID = 2, |
| VMBUS_MONITOR_CONNECTION_ID = 3, |
| VMBUS_MONITOR_PORT_ID = 3, |
| VMBUS_MESSAGE_SINT = 2, |
| }; |
| |
| /* |
| * Per cpu state for channel handling |
| */ |
| struct hv_per_cpu_context { |
| void *synic_message_page; |
| void *synic_event_page; |
| /* |
| * buffer to post messages to the host. |
| */ |
| void *post_msg_page; |
| |
| /* |
| * Starting with win8, we can take channel interrupts on any CPU; |
| * we will manage the tasklet that handles events messages on a per CPU |
| * basis. |
| */ |
| struct tasklet_struct msg_dpc; |
| |
| /* |
| * To optimize the mapping of relid to channel, maintain |
| * per-cpu list of the channels based on their CPU affinity. |
| */ |
| struct list_head chan_list; |
| }; |
| |
| struct hv_context { |
| /* We only support running on top of Hyper-V |
| * So at this point this really can only contain the Hyper-V ID |
| */ |
| u64 guestid; |
| |
| struct hv_per_cpu_context __percpu *cpu_context; |
| |
| /* |
| * To manage allocations in a NUMA node. |
| * Array indexed by numa node ID. |
| */ |
| struct cpumask *hv_numa_map; |
| }; |
| |
| extern struct hv_context hv_context; |
| |
| /* Hv Interface */ |
| |
| extern int hv_init(void); |
| |
| extern int hv_post_message(union hv_connection_id connection_id, |
| enum hv_message_type message_type, |
| void *payload, size_t payload_size); |
| |
| extern int hv_synic_alloc(void); |
| |
| extern void hv_synic_free(void); |
| |
| extern void hv_synic_enable_regs(unsigned int cpu); |
| extern int hv_synic_init(unsigned int cpu); |
| |
| extern void hv_synic_disable_regs(unsigned int cpu); |
| extern int hv_synic_cleanup(unsigned int cpu); |
| |
| /* Interface */ |
| |
| void hv_ringbuffer_pre_init(struct vmbus_channel *channel); |
| |
| int hv_ringbuffer_init(struct hv_ring_buffer_info *ring_info, |
| struct page *pages, u32 pagecnt); |
| |
| void hv_ringbuffer_cleanup(struct hv_ring_buffer_info *ring_info); |
| |
| int hv_ringbuffer_write(struct vmbus_channel *channel, |
| const struct kvec *kv_list, u32 kv_count); |
| |
| int hv_ringbuffer_read(struct vmbus_channel *channel, |
| void *buffer, u32 buflen, u32 *buffer_actual_len, |
| u64 *requestid, bool raw); |
| |
| /* |
| * The Maximum number of channels (16348) is determined by the size of the |
| * interrupt page, which is HV_HYP_PAGE_SIZE. 1/2 of HV_HYP_PAGE_SIZE is to |
| * send endpoint interrupts, and the other is to receive endpoint interrupts. |
| */ |
| #define MAX_NUM_CHANNELS ((HV_HYP_PAGE_SIZE >> 1) << 3) |
| |
| /* The value here must be in multiple of 32 */ |
| /* TODO: Need to make this configurable */ |
| #define MAX_NUM_CHANNELS_SUPPORTED 256 |
| |
| |
| enum vmbus_connect_state { |
| DISCONNECTED, |
| CONNECTING, |
| CONNECTED, |
| DISCONNECTING |
| }; |
| |
| #define MAX_SIZE_CHANNEL_MESSAGE HV_MESSAGE_PAYLOAD_BYTE_COUNT |
| |
| struct vmbus_connection { |
| /* |
| * CPU on which the initial host contact was made. |
| */ |
| int connect_cpu; |
| |
| u32 msg_conn_id; |
| |
| atomic_t offer_in_progress; |
| |
| enum vmbus_connect_state conn_state; |
| |
| atomic_t next_gpadl_handle; |
| |
| struct completion unload_event; |
| /* |
| * Represents channel interrupts. Each bit position represents a |
| * channel. When a channel sends an interrupt via VMBUS, it finds its |
| * bit in the sendInterruptPage, set it and calls Hv to generate a port |
| * event. The other end receives the port event and parse the |
| * recvInterruptPage to see which bit is set |
| */ |
| void *int_page; |
| void *send_int_page; |
| void *recv_int_page; |
| |
| /* |
| * 2 pages - 1st page for parent->child notification and 2nd |
| * is child->parent notification |
| */ |
| struct hv_monitor_page *monitor_pages[2]; |
| struct list_head chn_msg_list; |
| spinlock_t channelmsg_lock; |
| |
| /* List of channels */ |
| struct list_head chn_list; |
| struct mutex channel_mutex; |
| |
| /* |
| * An offer message is handled first on the work_queue, and then |
| * is further handled on handle_primary_chan_wq or |
| * handle_sub_chan_wq. |
| */ |
| struct workqueue_struct *work_queue; |
| struct workqueue_struct *handle_primary_chan_wq; |
| struct workqueue_struct *handle_sub_chan_wq; |
| |
| /* |
| * The number of sub-channels and hv_sock channels that should be |
| * cleaned up upon suspend: sub-channels will be re-created upon |
| * resume, and hv_sock channels should not survive suspend. |
| */ |
| atomic_t nr_chan_close_on_suspend; |
| /* |
| * vmbus_bus_suspend() waits for "nr_chan_close_on_suspend" to |
| * drop to zero. |
| */ |
| struct completion ready_for_suspend_event; |
| |
| /* |
| * The number of primary channels that should be "fixed up" |
| * upon resume: these channels are re-offered upon resume, and some |
| * fields of the channel offers (i.e. child_relid and connection_id) |
| * can change, so the old offermsg must be fixed up, before the resume |
| * callbacks of the VSC drivers start to further touch the channels. |
| */ |
| atomic_t nr_chan_fixup_on_resume; |
| /* |
| * vmbus_bus_resume() waits for "nr_chan_fixup_on_resume" to |
| * drop to zero. |
| */ |
| struct completion ready_for_resume_event; |
| }; |
| |
| |
| struct vmbus_msginfo { |
| /* Bookkeeping stuff */ |
| struct list_head msglist_entry; |
| |
| /* The message itself */ |
| unsigned char msg[0]; |
| }; |
| |
| |
| extern struct vmbus_connection vmbus_connection; |
| |
| int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo, u32 version); |
| |
| static inline void vmbus_send_interrupt(u32 relid) |
| { |
| sync_set_bit(relid, vmbus_connection.send_int_page); |
| } |
| |
| enum vmbus_message_handler_type { |
| /* The related handler can sleep. */ |
| VMHT_BLOCKING = 0, |
| |
| /* The related handler must NOT sleep. */ |
| VMHT_NON_BLOCKING = 1, |
| }; |
| |
| struct vmbus_channel_message_table_entry { |
| enum vmbus_channel_message_type message_type; |
| enum vmbus_message_handler_type handler_type; |
| void (*message_handler)(struct vmbus_channel_message_header *msg); |
| }; |
| |
| extern const struct vmbus_channel_message_table_entry |
| channel_message_table[CHANNELMSG_COUNT]; |
| |
| |
| /* General vmbus interface */ |
| |
| struct hv_device *vmbus_device_create(const guid_t *type, |
| const guid_t *instance, |
| struct vmbus_channel *channel); |
| |
| int vmbus_device_register(struct hv_device *child_device_obj); |
| void vmbus_device_unregister(struct hv_device *device_obj); |
| int vmbus_add_channel_kobj(struct hv_device *device_obj, |
| struct vmbus_channel *channel); |
| |
| void vmbus_remove_channel_attr_group(struct vmbus_channel *channel); |
| |
| struct vmbus_channel *relid2channel(u32 relid); |
| |
| void vmbus_free_channels(void); |
| |
| /* Connection interface */ |
| |
| int vmbus_connect(void); |
| void vmbus_disconnect(void); |
| |
| int vmbus_post_msg(void *buffer, size_t buflen, bool can_sleep); |
| |
| void vmbus_on_event(unsigned long data); |
| void vmbus_on_msg_dpc(unsigned long data); |
| |
| int hv_kvp_init(struct hv_util_service *srv); |
| void hv_kvp_deinit(void); |
| void hv_kvp_onchannelcallback(void *context); |
| |
| int hv_vss_init(struct hv_util_service *srv); |
| void hv_vss_deinit(void); |
| void hv_vss_onchannelcallback(void *context); |
| |
| int hv_fcopy_init(struct hv_util_service *srv); |
| void hv_fcopy_deinit(void); |
| void hv_fcopy_onchannelcallback(void *context); |
| void vmbus_initiate_unload(bool crash); |
| |
| static inline void hv_poll_channel(struct vmbus_channel *channel, |
| void (*cb)(void *)) |
| { |
| if (!channel) |
| return; |
| |
| if (in_interrupt() && (channel->target_cpu == smp_processor_id())) { |
| cb(channel); |
| return; |
| } |
| smp_call_function_single(channel->target_cpu, cb, channel, true); |
| } |
| |
| enum hvutil_device_state { |
| HVUTIL_DEVICE_INIT = 0, /* driver is loaded, waiting for userspace */ |
| HVUTIL_READY, /* userspace is registered */ |
| HVUTIL_HOSTMSG_RECEIVED, /* message from the host was received */ |
| HVUTIL_USERSPACE_REQ, /* request to userspace was sent */ |
| HVUTIL_USERSPACE_RECV, /* reply from userspace was received */ |
| HVUTIL_DEVICE_DYING, /* driver unload is in progress */ |
| }; |
| |
| enum delay { |
| INTERRUPT_DELAY = 0, |
| MESSAGE_DELAY = 1, |
| }; |
| |
| #ifdef CONFIG_HYPERV_TESTING |
| |
| int hv_debug_add_dev_dir(struct hv_device *dev); |
| void hv_debug_rm_dev_dir(struct hv_device *dev); |
| void hv_debug_rm_all_dir(void); |
| int hv_debug_init(void); |
| void hv_debug_delay_test(struct vmbus_channel *channel, enum delay delay_type); |
| |
| #else /* CONFIG_HYPERV_TESTING */ |
| |
| static inline void hv_debug_rm_dev_dir(struct hv_device *dev) {}; |
| static inline void hv_debug_rm_all_dir(void) {}; |
| static inline void hv_debug_delay_test(struct vmbus_channel *channel, |
| enum delay delay_type) {}; |
| static inline int hv_debug_init(void) |
| { |
| return -1; |
| } |
| |
| static inline int hv_debug_add_dev_dir(struct hv_device *dev) |
| { |
| return -1; |
| } |
| |
| #endif /* CONFIG_HYPERV_TESTING */ |
| |
| #endif /* _HYPERV_VMBUS_H */ |