| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * MFD core driver for Rockchip RK808/RK818 |
| * |
| * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd |
| * |
| * Author: Chris Zhong <zyw@rock-chips.com> |
| * Author: Zhang Qing <zhangqing@rock-chips.com> |
| * |
| * Copyright (C) 2016 PHYTEC Messtechnik GmbH |
| * |
| * Author: Wadim Egorov <w.egorov@phytec.de> |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/interrupt.h> |
| #include <linux/mfd/rk808.h> |
| #include <linux/mfd/core.h> |
| #include <linux/module.h> |
| #include <linux/of_device.h> |
| #include <linux/regmap.h> |
| #include <linux/syscore_ops.h> |
| |
| struct rk808_reg_data { |
| int addr; |
| int mask; |
| int value; |
| }; |
| |
| static bool rk808_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| /* |
| * Notes: |
| * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but |
| * we don't use that feature. It's better to cache. |
| * - It's unlikely we care that RK808_DEVCTRL_REG is volatile since |
| * bits are cleared in case when we shutoff anyway, but better safe. |
| */ |
| |
| switch (reg) { |
| case RK808_SECONDS_REG ... RK808_WEEKS_REG: |
| case RK808_RTC_STATUS_REG: |
| case RK808_VB_MON_REG: |
| case RK808_THERMAL_REG: |
| case RK808_DCDC_UV_STS_REG: |
| case RK808_LDO_UV_STS_REG: |
| case RK808_DCDC_PG_REG: |
| case RK808_LDO_PG_REG: |
| case RK808_DEVCTRL_REG: |
| case RK808_INT_STS_REG1: |
| case RK808_INT_STS_REG2: |
| return true; |
| } |
| |
| return false; |
| } |
| |
| static bool rk817_is_volatile_reg(struct device *dev, unsigned int reg) |
| { |
| /* |
| * Notes: |
| * - Technically the ROUND_30s bit makes RTC_CTRL_REG volatile, but |
| * we don't use that feature. It's better to cache. |
| */ |
| |
| switch (reg) { |
| case RK817_SECONDS_REG ... RK817_WEEKS_REG: |
| case RK817_RTC_STATUS_REG: |
| case RK817_INT_STS_REG0: |
| case RK817_INT_STS_REG1: |
| case RK817_INT_STS_REG2: |
| case RK817_SYS_STS: |
| return true; |
| } |
| |
| return true; |
| } |
| |
| static const struct regmap_config rk818_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = RK818_USB_CTRL_REG, |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_reg = rk808_is_volatile_reg, |
| }; |
| |
| static const struct regmap_config rk805_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = RK805_OFF_SOURCE_REG, |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_reg = rk808_is_volatile_reg, |
| }; |
| |
| static const struct regmap_config rk808_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = RK808_IO_POL_REG, |
| .cache_type = REGCACHE_RBTREE, |
| .volatile_reg = rk808_is_volatile_reg, |
| }; |
| |
| static const struct regmap_config rk817_regmap_config = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = RK817_GPIO_INT_CFG, |
| .cache_type = REGCACHE_NONE, |
| .volatile_reg = rk817_is_volatile_reg, |
| }; |
| |
| static struct resource rtc_resources[] = { |
| DEFINE_RES_IRQ(RK808_IRQ_RTC_ALARM), |
| }; |
| |
| static struct resource rk817_rtc_resources[] = { |
| DEFINE_RES_IRQ(RK817_IRQ_RTC_ALARM), |
| }; |
| |
| static struct resource rk805_key_resources[] = { |
| DEFINE_RES_IRQ(RK805_IRQ_PWRON_RISE), |
| DEFINE_RES_IRQ(RK805_IRQ_PWRON_FALL), |
| }; |
| |
| static struct resource rk817_pwrkey_resources[] = { |
| DEFINE_RES_IRQ(RK817_IRQ_PWRON_RISE), |
| DEFINE_RES_IRQ(RK817_IRQ_PWRON_FALL), |
| }; |
| |
| static const struct mfd_cell rk805s[] = { |
| { .name = "rk808-clkout", }, |
| { .name = "rk808-regulator", }, |
| { .name = "rk805-pinctrl", }, |
| { |
| .name = "rk808-rtc", |
| .num_resources = ARRAY_SIZE(rtc_resources), |
| .resources = &rtc_resources[0], |
| }, |
| { .name = "rk805-pwrkey", |
| .num_resources = ARRAY_SIZE(rk805_key_resources), |
| .resources = &rk805_key_resources[0], |
| }, |
| }; |
| |
| static const struct mfd_cell rk808s[] = { |
| { .name = "rk808-clkout", }, |
| { .name = "rk808-regulator", }, |
| { |
| .name = "rk808-rtc", |
| .num_resources = ARRAY_SIZE(rtc_resources), |
| .resources = rtc_resources, |
| }, |
| }; |
| |
| static const struct mfd_cell rk817s[] = { |
| { .name = "rk808-clkout",}, |
| { .name = "rk808-regulator",}, |
| { |
| .name = "rk805-pwrkey", |
| .num_resources = ARRAY_SIZE(rk817_pwrkey_resources), |
| .resources = &rk817_pwrkey_resources[0], |
| }, |
| { |
| .name = "rk808-rtc", |
| .num_resources = ARRAY_SIZE(rk817_rtc_resources), |
| .resources = &rk817_rtc_resources[0], |
| }, |
| }; |
| |
| static const struct mfd_cell rk818s[] = { |
| { .name = "rk808-clkout", }, |
| { .name = "rk808-regulator", }, |
| { |
| .name = "rk808-rtc", |
| .num_resources = ARRAY_SIZE(rtc_resources), |
| .resources = rtc_resources, |
| }, |
| }; |
| |
| static const struct rk808_reg_data rk805_pre_init_reg[] = { |
| {RK805_BUCK1_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK, |
| RK805_BUCK1_2_ILMAX_4000MA}, |
| {RK805_BUCK2_CONFIG_REG, RK805_BUCK1_2_ILMAX_MASK, |
| RK805_BUCK1_2_ILMAX_4000MA}, |
| {RK805_BUCK3_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK, |
| RK805_BUCK3_ILMAX_3000MA}, |
| {RK805_BUCK4_CONFIG_REG, RK805_BUCK3_4_ILMAX_MASK, |
| RK805_BUCK4_ILMAX_3500MA}, |
| {RK805_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_400MA}, |
| {RK805_GPIO_IO_POL_REG, SLP_SD_MSK, SLEEP_FUN}, |
| {RK805_THERMAL_REG, TEMP_HOTDIE_MSK, TEMP115C}, |
| }; |
| |
| static const struct rk808_reg_data rk808_pre_init_reg[] = { |
| { RK808_BUCK3_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_150MA }, |
| { RK808_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_200MA }, |
| { RK808_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA }, |
| { RK808_BUCK1_CONFIG_REG, BUCK1_RATE_MASK, BUCK_ILMIN_200MA }, |
| { RK808_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_200MA }, |
| { RK808_DCDC_UV_ACT_REG, BUCK_UV_ACT_MASK, BUCK_UV_ACT_DISABLE}, |
| { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | |
| VB_LO_SEL_3500MV }, |
| }; |
| |
| static const struct rk808_reg_data rk817_pre_init_reg[] = { |
| {RK817_RTC_CTRL_REG, RTC_STOP, RTC_STOP}, |
| {RK817_GPIO_INT_CFG, RK817_INT_POL_MSK, RK817_INT_POL_L}, |
| {RK817_SYS_CFG(1), RK817_HOTDIE_TEMP_MSK | RK817_TSD_TEMP_MSK, |
| RK817_HOTDIE_105 | RK817_TSD_140}, |
| }; |
| |
| static const struct rk808_reg_data rk818_pre_init_reg[] = { |
| /* improve efficiency */ |
| { RK818_BUCK2_CONFIG_REG, BUCK2_RATE_MASK, BUCK_ILMIN_250MA }, |
| { RK818_BUCK4_CONFIG_REG, BUCK_ILMIN_MASK, BUCK_ILMIN_250MA }, |
| { RK818_BOOST_CONFIG_REG, BOOST_ILMIN_MASK, BOOST_ILMIN_100MA }, |
| { RK818_USB_CTRL_REG, RK818_USB_ILIM_SEL_MASK, |
| RK818_USB_ILMIN_2000MA }, |
| /* close charger when usb lower then 3.4V */ |
| { RK818_USB_CTRL_REG, RK818_USB_CHG_SD_VSEL_MASK, |
| (0x7 << 4) }, |
| /* no action when vref */ |
| { RK818_H5V_EN_REG, BIT(1), RK818_REF_RDY_CTRL }, |
| /* enable HDMI 5V */ |
| { RK818_H5V_EN_REG, BIT(0), RK818_H5V_EN }, |
| { RK808_VB_MON_REG, MASK_ALL, VB_LO_ACT | |
| VB_LO_SEL_3500MV }, |
| }; |
| |
| static const struct regmap_irq rk805_irqs[] = { |
| [RK805_IRQ_PWRON_RISE] = { |
| .mask = RK805_IRQ_PWRON_RISE_MSK, |
| .reg_offset = 0, |
| }, |
| [RK805_IRQ_VB_LOW] = { |
| .mask = RK805_IRQ_VB_LOW_MSK, |
| .reg_offset = 0, |
| }, |
| [RK805_IRQ_PWRON] = { |
| .mask = RK805_IRQ_PWRON_MSK, |
| .reg_offset = 0, |
| }, |
| [RK805_IRQ_PWRON_LP] = { |
| .mask = RK805_IRQ_PWRON_LP_MSK, |
| .reg_offset = 0, |
| }, |
| [RK805_IRQ_HOTDIE] = { |
| .mask = RK805_IRQ_HOTDIE_MSK, |
| .reg_offset = 0, |
| }, |
| [RK805_IRQ_RTC_ALARM] = { |
| .mask = RK805_IRQ_RTC_ALARM_MSK, |
| .reg_offset = 0, |
| }, |
| [RK805_IRQ_RTC_PERIOD] = { |
| .mask = RK805_IRQ_RTC_PERIOD_MSK, |
| .reg_offset = 0, |
| }, |
| [RK805_IRQ_PWRON_FALL] = { |
| .mask = RK805_IRQ_PWRON_FALL_MSK, |
| .reg_offset = 0, |
| }, |
| }; |
| |
| static const struct regmap_irq rk808_irqs[] = { |
| /* INT_STS */ |
| [RK808_IRQ_VOUT_LO] = { |
| .mask = RK808_IRQ_VOUT_LO_MSK, |
| .reg_offset = 0, |
| }, |
| [RK808_IRQ_VB_LO] = { |
| .mask = RK808_IRQ_VB_LO_MSK, |
| .reg_offset = 0, |
| }, |
| [RK808_IRQ_PWRON] = { |
| .mask = RK808_IRQ_PWRON_MSK, |
| .reg_offset = 0, |
| }, |
| [RK808_IRQ_PWRON_LP] = { |
| .mask = RK808_IRQ_PWRON_LP_MSK, |
| .reg_offset = 0, |
| }, |
| [RK808_IRQ_HOTDIE] = { |
| .mask = RK808_IRQ_HOTDIE_MSK, |
| .reg_offset = 0, |
| }, |
| [RK808_IRQ_RTC_ALARM] = { |
| .mask = RK808_IRQ_RTC_ALARM_MSK, |
| .reg_offset = 0, |
| }, |
| [RK808_IRQ_RTC_PERIOD] = { |
| .mask = RK808_IRQ_RTC_PERIOD_MSK, |
| .reg_offset = 0, |
| }, |
| |
| /* INT_STS2 */ |
| [RK808_IRQ_PLUG_IN_INT] = { |
| .mask = RK808_IRQ_PLUG_IN_INT_MSK, |
| .reg_offset = 1, |
| }, |
| [RK808_IRQ_PLUG_OUT_INT] = { |
| .mask = RK808_IRQ_PLUG_OUT_INT_MSK, |
| .reg_offset = 1, |
| }, |
| }; |
| |
| static const struct regmap_irq rk818_irqs[] = { |
| /* INT_STS */ |
| [RK818_IRQ_VOUT_LO] = { |
| .mask = RK818_IRQ_VOUT_LO_MSK, |
| .reg_offset = 0, |
| }, |
| [RK818_IRQ_VB_LO] = { |
| .mask = RK818_IRQ_VB_LO_MSK, |
| .reg_offset = 0, |
| }, |
| [RK818_IRQ_PWRON] = { |
| .mask = RK818_IRQ_PWRON_MSK, |
| .reg_offset = 0, |
| }, |
| [RK818_IRQ_PWRON_LP] = { |
| .mask = RK818_IRQ_PWRON_LP_MSK, |
| .reg_offset = 0, |
| }, |
| [RK818_IRQ_HOTDIE] = { |
| .mask = RK818_IRQ_HOTDIE_MSK, |
| .reg_offset = 0, |
| }, |
| [RK818_IRQ_RTC_ALARM] = { |
| .mask = RK818_IRQ_RTC_ALARM_MSK, |
| .reg_offset = 0, |
| }, |
| [RK818_IRQ_RTC_PERIOD] = { |
| .mask = RK818_IRQ_RTC_PERIOD_MSK, |
| .reg_offset = 0, |
| }, |
| [RK818_IRQ_USB_OV] = { |
| .mask = RK818_IRQ_USB_OV_MSK, |
| .reg_offset = 0, |
| }, |
| |
| /* INT_STS2 */ |
| [RK818_IRQ_PLUG_IN] = { |
| .mask = RK818_IRQ_PLUG_IN_MSK, |
| .reg_offset = 1, |
| }, |
| [RK818_IRQ_PLUG_OUT] = { |
| .mask = RK818_IRQ_PLUG_OUT_MSK, |
| .reg_offset = 1, |
| }, |
| [RK818_IRQ_CHG_OK] = { |
| .mask = RK818_IRQ_CHG_OK_MSK, |
| .reg_offset = 1, |
| }, |
| [RK818_IRQ_CHG_TE] = { |
| .mask = RK818_IRQ_CHG_TE_MSK, |
| .reg_offset = 1, |
| }, |
| [RK818_IRQ_CHG_TS1] = { |
| .mask = RK818_IRQ_CHG_TS1_MSK, |
| .reg_offset = 1, |
| }, |
| [RK818_IRQ_TS2] = { |
| .mask = RK818_IRQ_TS2_MSK, |
| .reg_offset = 1, |
| }, |
| [RK818_IRQ_CHG_CVTLIM] = { |
| .mask = RK818_IRQ_CHG_CVTLIM_MSK, |
| .reg_offset = 1, |
| }, |
| [RK818_IRQ_DISCHG_ILIM] = { |
| .mask = RK818_IRQ_DISCHG_ILIM_MSK, |
| .reg_offset = 1, |
| }, |
| }; |
| |
| static const struct regmap_irq rk817_irqs[RK817_IRQ_END] = { |
| REGMAP_IRQ_REG_LINE(0, 8), |
| REGMAP_IRQ_REG_LINE(1, 8), |
| REGMAP_IRQ_REG_LINE(2, 8), |
| REGMAP_IRQ_REG_LINE(3, 8), |
| REGMAP_IRQ_REG_LINE(4, 8), |
| REGMAP_IRQ_REG_LINE(5, 8), |
| REGMAP_IRQ_REG_LINE(6, 8), |
| REGMAP_IRQ_REG_LINE(7, 8), |
| REGMAP_IRQ_REG_LINE(8, 8), |
| REGMAP_IRQ_REG_LINE(9, 8), |
| REGMAP_IRQ_REG_LINE(10, 8), |
| REGMAP_IRQ_REG_LINE(11, 8), |
| REGMAP_IRQ_REG_LINE(12, 8), |
| REGMAP_IRQ_REG_LINE(13, 8), |
| REGMAP_IRQ_REG_LINE(14, 8), |
| REGMAP_IRQ_REG_LINE(15, 8), |
| REGMAP_IRQ_REG_LINE(16, 8), |
| REGMAP_IRQ_REG_LINE(17, 8), |
| REGMAP_IRQ_REG_LINE(18, 8), |
| REGMAP_IRQ_REG_LINE(19, 8), |
| REGMAP_IRQ_REG_LINE(20, 8), |
| REGMAP_IRQ_REG_LINE(21, 8), |
| REGMAP_IRQ_REG_LINE(22, 8), |
| REGMAP_IRQ_REG_LINE(23, 8) |
| }; |
| |
| static struct regmap_irq_chip rk805_irq_chip = { |
| .name = "rk805", |
| .irqs = rk805_irqs, |
| .num_irqs = ARRAY_SIZE(rk805_irqs), |
| .num_regs = 1, |
| .status_base = RK805_INT_STS_REG, |
| .mask_base = RK805_INT_STS_MSK_REG, |
| .ack_base = RK805_INT_STS_REG, |
| .init_ack_masked = true, |
| }; |
| |
| static const struct regmap_irq_chip rk808_irq_chip = { |
| .name = "rk808", |
| .irqs = rk808_irqs, |
| .num_irqs = ARRAY_SIZE(rk808_irqs), |
| .num_regs = 2, |
| .irq_reg_stride = 2, |
| .status_base = RK808_INT_STS_REG1, |
| .mask_base = RK808_INT_STS_MSK_REG1, |
| .ack_base = RK808_INT_STS_REG1, |
| .init_ack_masked = true, |
| }; |
| |
| static struct regmap_irq_chip rk817_irq_chip = { |
| .name = "rk817", |
| .irqs = rk817_irqs, |
| .num_irqs = ARRAY_SIZE(rk817_irqs), |
| .num_regs = 3, |
| .irq_reg_stride = 2, |
| .status_base = RK817_INT_STS_REG0, |
| .mask_base = RK817_INT_STS_MSK_REG0, |
| .ack_base = RK817_INT_STS_REG0, |
| .init_ack_masked = true, |
| }; |
| |
| static const struct regmap_irq_chip rk818_irq_chip = { |
| .name = "rk818", |
| .irqs = rk818_irqs, |
| .num_irqs = ARRAY_SIZE(rk818_irqs), |
| .num_regs = 2, |
| .irq_reg_stride = 2, |
| .status_base = RK818_INT_STS_REG1, |
| .mask_base = RK818_INT_STS_MSK_REG1, |
| .ack_base = RK818_INT_STS_REG1, |
| .init_ack_masked = true, |
| }; |
| |
| static struct i2c_client *rk808_i2c_client; |
| |
| static void rk805_device_shutdown(void) |
| { |
| int ret; |
| struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); |
| |
| if (!rk808) |
| return; |
| |
| ret = regmap_update_bits(rk808->regmap, |
| RK805_DEV_CTRL_REG, |
| DEV_OFF, DEV_OFF); |
| if (ret) |
| dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n"); |
| } |
| |
| static void rk805_device_shutdown_prepare(void) |
| { |
| int ret; |
| struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); |
| |
| if (!rk808) |
| return; |
| |
| ret = regmap_update_bits(rk808->regmap, |
| RK805_GPIO_IO_POL_REG, |
| SLP_SD_MSK, SHUTDOWN_FUN); |
| if (ret) |
| dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n"); |
| } |
| |
| static void rk808_device_shutdown(void) |
| { |
| int ret; |
| struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); |
| |
| if (!rk808) |
| return; |
| |
| ret = regmap_update_bits(rk808->regmap, |
| RK808_DEVCTRL_REG, |
| DEV_OFF_RST, DEV_OFF_RST); |
| if (ret) |
| dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n"); |
| } |
| |
| static void rk818_device_shutdown(void) |
| { |
| int ret; |
| struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); |
| |
| if (!rk808) |
| return; |
| |
| ret = regmap_update_bits(rk808->regmap, |
| RK818_DEVCTRL_REG, |
| DEV_OFF, DEV_OFF); |
| if (ret) |
| dev_err(&rk808_i2c_client->dev, "Failed to shutdown device!\n"); |
| } |
| |
| static void rk8xx_syscore_shutdown(void) |
| { |
| struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); |
| int ret; |
| |
| if (system_state == SYSTEM_POWER_OFF && |
| (rk808->variant == RK809_ID || rk808->variant == RK817_ID)) { |
| ret = regmap_update_bits(rk808->regmap, |
| RK817_SYS_CFG(3), |
| RK817_SLPPIN_FUNC_MSK, |
| SLPPIN_DN_FUN); |
| if (ret) { |
| dev_warn(&rk808_i2c_client->dev, |
| "Cannot switch to power down function\n"); |
| } |
| } |
| } |
| |
| static struct syscore_ops rk808_syscore_ops = { |
| .shutdown = rk8xx_syscore_shutdown, |
| }; |
| |
| static const struct of_device_id rk808_of_match[] = { |
| { .compatible = "rockchip,rk805" }, |
| { .compatible = "rockchip,rk808" }, |
| { .compatible = "rockchip,rk809" }, |
| { .compatible = "rockchip,rk817" }, |
| { .compatible = "rockchip,rk818" }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, rk808_of_match); |
| |
| static int rk808_probe(struct i2c_client *client, |
| const struct i2c_device_id *id) |
| { |
| struct device_node *np = client->dev.of_node; |
| struct rk808 *rk808; |
| const struct rk808_reg_data *pre_init_reg; |
| const struct mfd_cell *cells; |
| int nr_pre_init_regs; |
| int nr_cells; |
| int pm_off = 0, msb, lsb; |
| unsigned char pmic_id_msb, pmic_id_lsb; |
| int ret; |
| int i; |
| |
| rk808 = devm_kzalloc(&client->dev, sizeof(*rk808), GFP_KERNEL); |
| if (!rk808) |
| return -ENOMEM; |
| |
| if (of_device_is_compatible(np, "rockchip,rk817") || |
| of_device_is_compatible(np, "rockchip,rk809")) { |
| pmic_id_msb = RK817_ID_MSB; |
| pmic_id_lsb = RK817_ID_LSB; |
| } else { |
| pmic_id_msb = RK808_ID_MSB; |
| pmic_id_lsb = RK808_ID_LSB; |
| } |
| |
| /* Read chip variant */ |
| msb = i2c_smbus_read_byte_data(client, pmic_id_msb); |
| if (msb < 0) { |
| dev_err(&client->dev, "failed to read the chip id at 0x%x\n", |
| RK808_ID_MSB); |
| return msb; |
| } |
| |
| lsb = i2c_smbus_read_byte_data(client, pmic_id_lsb); |
| if (lsb < 0) { |
| dev_err(&client->dev, "failed to read the chip id at 0x%x\n", |
| RK808_ID_LSB); |
| return lsb; |
| } |
| |
| rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK; |
| dev_info(&client->dev, "chip id: 0x%x\n", (unsigned int)rk808->variant); |
| |
| switch (rk808->variant) { |
| case RK805_ID: |
| rk808->regmap_cfg = &rk805_regmap_config; |
| rk808->regmap_irq_chip = &rk805_irq_chip; |
| pre_init_reg = rk805_pre_init_reg; |
| nr_pre_init_regs = ARRAY_SIZE(rk805_pre_init_reg); |
| cells = rk805s; |
| nr_cells = ARRAY_SIZE(rk805s); |
| rk808->pm_pwroff_fn = rk805_device_shutdown; |
| rk808->pm_pwroff_prep_fn = rk805_device_shutdown_prepare; |
| break; |
| case RK808_ID: |
| rk808->regmap_cfg = &rk808_regmap_config; |
| rk808->regmap_irq_chip = &rk808_irq_chip; |
| pre_init_reg = rk808_pre_init_reg; |
| nr_pre_init_regs = ARRAY_SIZE(rk808_pre_init_reg); |
| cells = rk808s; |
| nr_cells = ARRAY_SIZE(rk808s); |
| rk808->pm_pwroff_fn = rk808_device_shutdown; |
| break; |
| case RK818_ID: |
| rk808->regmap_cfg = &rk818_regmap_config; |
| rk808->regmap_irq_chip = &rk818_irq_chip; |
| pre_init_reg = rk818_pre_init_reg; |
| nr_pre_init_regs = ARRAY_SIZE(rk818_pre_init_reg); |
| cells = rk818s; |
| nr_cells = ARRAY_SIZE(rk818s); |
| rk808->pm_pwroff_fn = rk818_device_shutdown; |
| break; |
| case RK809_ID: |
| case RK817_ID: |
| rk808->regmap_cfg = &rk817_regmap_config; |
| rk808->regmap_irq_chip = &rk817_irq_chip; |
| pre_init_reg = rk817_pre_init_reg; |
| nr_pre_init_regs = ARRAY_SIZE(rk817_pre_init_reg); |
| cells = rk817s; |
| nr_cells = ARRAY_SIZE(rk817s); |
| register_syscore_ops(&rk808_syscore_ops); |
| break; |
| default: |
| dev_err(&client->dev, "Unsupported RK8XX ID %lu\n", |
| rk808->variant); |
| return -EINVAL; |
| } |
| |
| rk808->i2c = client; |
| i2c_set_clientdata(client, rk808); |
| |
| rk808->regmap = devm_regmap_init_i2c(client, rk808->regmap_cfg); |
| if (IS_ERR(rk808->regmap)) { |
| dev_err(&client->dev, "regmap initialization failed\n"); |
| return PTR_ERR(rk808->regmap); |
| } |
| |
| if (!client->irq) { |
| dev_err(&client->dev, "No interrupt support, no core IRQ\n"); |
| return -EINVAL; |
| } |
| |
| ret = regmap_add_irq_chip(rk808->regmap, client->irq, |
| IRQF_ONESHOT, -1, |
| rk808->regmap_irq_chip, &rk808->irq_data); |
| if (ret) { |
| dev_err(&client->dev, "Failed to add irq_chip %d\n", ret); |
| return ret; |
| } |
| |
| for (i = 0; i < nr_pre_init_regs; i++) { |
| ret = regmap_update_bits(rk808->regmap, |
| pre_init_reg[i].addr, |
| pre_init_reg[i].mask, |
| pre_init_reg[i].value); |
| if (ret) { |
| dev_err(&client->dev, |
| "0x%x write err\n", |
| pre_init_reg[i].addr); |
| return ret; |
| } |
| } |
| |
| ret = devm_mfd_add_devices(&client->dev, PLATFORM_DEVID_NONE, |
| cells, nr_cells, NULL, 0, |
| regmap_irq_get_domain(rk808->irq_data)); |
| if (ret) { |
| dev_err(&client->dev, "failed to add MFD devices %d\n", ret); |
| goto err_irq; |
| } |
| |
| pm_off = of_property_read_bool(np, |
| "rockchip,system-power-controller"); |
| if (pm_off && !pm_power_off) { |
| rk808_i2c_client = client; |
| pm_power_off = rk808->pm_pwroff_fn; |
| } |
| |
| if (pm_off && !pm_power_off_prepare) { |
| if (!rk808_i2c_client) |
| rk808_i2c_client = client; |
| pm_power_off_prepare = rk808->pm_pwroff_prep_fn; |
| } |
| |
| return 0; |
| |
| err_irq: |
| regmap_del_irq_chip(client->irq, rk808->irq_data); |
| return ret; |
| } |
| |
| static int rk808_remove(struct i2c_client *client) |
| { |
| struct rk808 *rk808 = i2c_get_clientdata(client); |
| |
| regmap_del_irq_chip(client->irq, rk808->irq_data); |
| |
| /** |
| * pm_power_off may points to a function from another module. |
| * Check if the pointer is set by us and only then overwrite it. |
| */ |
| if (rk808->pm_pwroff_fn && pm_power_off == rk808->pm_pwroff_fn) |
| pm_power_off = NULL; |
| |
| /** |
| * As above, check if the pointer is set by us before overwrite. |
| */ |
| if (rk808->pm_pwroff_prep_fn && |
| pm_power_off_prepare == rk808->pm_pwroff_prep_fn) |
| pm_power_off_prepare = NULL; |
| |
| return 0; |
| } |
| |
| static int __maybe_unused rk8xx_suspend(struct device *dev) |
| { |
| struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); |
| int ret = 0; |
| |
| switch (rk808->variant) { |
| case RK809_ID: |
| case RK817_ID: |
| ret = regmap_update_bits(rk808->regmap, |
| RK817_SYS_CFG(3), |
| RK817_SLPPIN_FUNC_MSK, |
| SLPPIN_SLP_FUN); |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| |
| static int __maybe_unused rk8xx_resume(struct device *dev) |
| { |
| struct rk808 *rk808 = i2c_get_clientdata(rk808_i2c_client); |
| int ret = 0; |
| |
| switch (rk808->variant) { |
| case RK809_ID: |
| case RK817_ID: |
| ret = regmap_update_bits(rk808->regmap, |
| RK817_SYS_CFG(3), |
| RK817_SLPPIN_FUNC_MSK, |
| SLPPIN_NULL_FUN); |
| break; |
| default: |
| break; |
| } |
| |
| return ret; |
| } |
| static SIMPLE_DEV_PM_OPS(rk8xx_pm_ops, rk8xx_suspend, rk8xx_resume); |
| |
| static struct i2c_driver rk808_i2c_driver = { |
| .driver = { |
| .name = "rk808", |
| .of_match_table = rk808_of_match, |
| .pm = &rk8xx_pm_ops, |
| }, |
| .probe = rk808_probe, |
| .remove = rk808_remove, |
| }; |
| |
| module_i2c_driver(rk808_i2c_driver); |
| |
| MODULE_LICENSE("GPL"); |
| MODULE_AUTHOR("Chris Zhong <zyw@rock-chips.com>"); |
| MODULE_AUTHOR("Zhang Qing <zhangqing@rock-chips.com>"); |
| MODULE_AUTHOR("Wadim Egorov <w.egorov@phytec.de>"); |
| MODULE_DESCRIPTION("RK808/RK818 PMIC driver"); |