| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Thunderbolt driver - NHI driver |
| * |
| * The NHI (native host interface) is the pci device that allows us to send and |
| * receive frames from the thunderbolt bus. |
| * |
| * Copyright (c) 2014 Andreas Noever <andreas.noever@gmail.com> |
| * Copyright (C) 2018, Intel Corporation |
| */ |
| |
| #include <linux/pm_runtime.h> |
| #include <linux/slab.h> |
| #include <linux/errno.h> |
| #include <linux/pci.h> |
| #include <linux/interrupt.h> |
| #include <linux/module.h> |
| #include <linux/delay.h> |
| #include <linux/property.h> |
| |
| #include "nhi.h" |
| #include "nhi_regs.h" |
| #include "tb.h" |
| |
| #define RING_TYPE(ring) ((ring)->is_tx ? "TX ring" : "RX ring") |
| |
| /* |
| * Used to enable end-to-end workaround for missing RX packets. Do not |
| * use this ring for anything else. |
| */ |
| #define RING_E2E_UNUSED_HOPID 2 |
| #define RING_FIRST_USABLE_HOPID TB_PATH_MIN_HOPID |
| |
| /* |
| * Minimal number of vectors when we use MSI-X. Two for control channel |
| * Rx/Tx and the rest four are for cross domain DMA paths. |
| */ |
| #define MSIX_MIN_VECS 6 |
| #define MSIX_MAX_VECS 16 |
| |
| #define NHI_MAILBOX_TIMEOUT 500 /* ms */ |
| |
| static int ring_interrupt_index(struct tb_ring *ring) |
| { |
| int bit = ring->hop; |
| if (!ring->is_tx) |
| bit += ring->nhi->hop_count; |
| return bit; |
| } |
| |
| /** |
| * ring_interrupt_active() - activate/deactivate interrupts for a single ring |
| * |
| * ring->nhi->lock must be held. |
| */ |
| static void ring_interrupt_active(struct tb_ring *ring, bool active) |
| { |
| int reg = REG_RING_INTERRUPT_BASE + |
| ring_interrupt_index(ring) / 32 * 4; |
| int bit = ring_interrupt_index(ring) & 31; |
| int mask = 1 << bit; |
| u32 old, new; |
| |
| if (ring->irq > 0) { |
| u32 step, shift, ivr, misc; |
| void __iomem *ivr_base; |
| int index; |
| |
| if (ring->is_tx) |
| index = ring->hop; |
| else |
| index = ring->hop + ring->nhi->hop_count; |
| |
| /* |
| * Ask the hardware to clear interrupt status bits automatically |
| * since we already know which interrupt was triggered. |
| */ |
| misc = ioread32(ring->nhi->iobase + REG_DMA_MISC); |
| if (!(misc & REG_DMA_MISC_INT_AUTO_CLEAR)) { |
| misc |= REG_DMA_MISC_INT_AUTO_CLEAR; |
| iowrite32(misc, ring->nhi->iobase + REG_DMA_MISC); |
| } |
| |
| ivr_base = ring->nhi->iobase + REG_INT_VEC_ALLOC_BASE; |
| step = index / REG_INT_VEC_ALLOC_REGS * REG_INT_VEC_ALLOC_BITS; |
| shift = index % REG_INT_VEC_ALLOC_REGS * REG_INT_VEC_ALLOC_BITS; |
| ivr = ioread32(ivr_base + step); |
| ivr &= ~(REG_INT_VEC_ALLOC_MASK << shift); |
| if (active) |
| ivr |= ring->vector << shift; |
| iowrite32(ivr, ivr_base + step); |
| } |
| |
| old = ioread32(ring->nhi->iobase + reg); |
| if (active) |
| new = old | mask; |
| else |
| new = old & ~mask; |
| |
| dev_dbg(&ring->nhi->pdev->dev, |
| "%s interrupt at register %#x bit %d (%#x -> %#x)\n", |
| active ? "enabling" : "disabling", reg, bit, old, new); |
| |
| if (new == old) |
| dev_WARN(&ring->nhi->pdev->dev, |
| "interrupt for %s %d is already %s\n", |
| RING_TYPE(ring), ring->hop, |
| active ? "enabled" : "disabled"); |
| iowrite32(new, ring->nhi->iobase + reg); |
| } |
| |
| /** |
| * nhi_disable_interrupts() - disable interrupts for all rings |
| * |
| * Use only during init and shutdown. |
| */ |
| static void nhi_disable_interrupts(struct tb_nhi *nhi) |
| { |
| int i = 0; |
| /* disable interrupts */ |
| for (i = 0; i < RING_INTERRUPT_REG_COUNT(nhi); i++) |
| iowrite32(0, nhi->iobase + REG_RING_INTERRUPT_BASE + 4 * i); |
| |
| /* clear interrupt status bits */ |
| for (i = 0; i < RING_NOTIFY_REG_COUNT(nhi); i++) |
| ioread32(nhi->iobase + REG_RING_NOTIFY_BASE + 4 * i); |
| } |
| |
| /* ring helper methods */ |
| |
| static void __iomem *ring_desc_base(struct tb_ring *ring) |
| { |
| void __iomem *io = ring->nhi->iobase; |
| io += ring->is_tx ? REG_TX_RING_BASE : REG_RX_RING_BASE; |
| io += ring->hop * 16; |
| return io; |
| } |
| |
| static void __iomem *ring_options_base(struct tb_ring *ring) |
| { |
| void __iomem *io = ring->nhi->iobase; |
| io += ring->is_tx ? REG_TX_OPTIONS_BASE : REG_RX_OPTIONS_BASE; |
| io += ring->hop * 32; |
| return io; |
| } |
| |
| static void ring_iowrite_cons(struct tb_ring *ring, u16 cons) |
| { |
| /* |
| * The other 16-bits in the register is read-only and writes to it |
| * are ignored by the hardware so we can save one ioread32() by |
| * filling the read-only bits with zeroes. |
| */ |
| iowrite32(cons, ring_desc_base(ring) + 8); |
| } |
| |
| static void ring_iowrite_prod(struct tb_ring *ring, u16 prod) |
| { |
| /* See ring_iowrite_cons() above for explanation */ |
| iowrite32(prod << 16, ring_desc_base(ring) + 8); |
| } |
| |
| static void ring_iowrite32desc(struct tb_ring *ring, u32 value, u32 offset) |
| { |
| iowrite32(value, ring_desc_base(ring) + offset); |
| } |
| |
| static void ring_iowrite64desc(struct tb_ring *ring, u64 value, u32 offset) |
| { |
| iowrite32(value, ring_desc_base(ring) + offset); |
| iowrite32(value >> 32, ring_desc_base(ring) + offset + 4); |
| } |
| |
| static void ring_iowrite32options(struct tb_ring *ring, u32 value, u32 offset) |
| { |
| iowrite32(value, ring_options_base(ring) + offset); |
| } |
| |
| static bool ring_full(struct tb_ring *ring) |
| { |
| return ((ring->head + 1) % ring->size) == ring->tail; |
| } |
| |
| static bool ring_empty(struct tb_ring *ring) |
| { |
| return ring->head == ring->tail; |
| } |
| |
| /** |
| * ring_write_descriptors() - post frames from ring->queue to the controller |
| * |
| * ring->lock is held. |
| */ |
| static void ring_write_descriptors(struct tb_ring *ring) |
| { |
| struct ring_frame *frame, *n; |
| struct ring_desc *descriptor; |
| list_for_each_entry_safe(frame, n, &ring->queue, list) { |
| if (ring_full(ring)) |
| break; |
| list_move_tail(&frame->list, &ring->in_flight); |
| descriptor = &ring->descriptors[ring->head]; |
| descriptor->phys = frame->buffer_phy; |
| descriptor->time = 0; |
| descriptor->flags = RING_DESC_POSTED | RING_DESC_INTERRUPT; |
| if (ring->is_tx) { |
| descriptor->length = frame->size; |
| descriptor->eof = frame->eof; |
| descriptor->sof = frame->sof; |
| } |
| ring->head = (ring->head + 1) % ring->size; |
| if (ring->is_tx) |
| ring_iowrite_prod(ring, ring->head); |
| else |
| ring_iowrite_cons(ring, ring->head); |
| } |
| } |
| |
| /** |
| * ring_work() - progress completed frames |
| * |
| * If the ring is shutting down then all frames are marked as canceled and |
| * their callbacks are invoked. |
| * |
| * Otherwise we collect all completed frame from the ring buffer, write new |
| * frame to the ring buffer and invoke the callbacks for the completed frames. |
| */ |
| static void ring_work(struct work_struct *work) |
| { |
| struct tb_ring *ring = container_of(work, typeof(*ring), work); |
| struct ring_frame *frame; |
| bool canceled = false; |
| unsigned long flags; |
| LIST_HEAD(done); |
| |
| spin_lock_irqsave(&ring->lock, flags); |
| |
| if (!ring->running) { |
| /* Move all frames to done and mark them as canceled. */ |
| list_splice_tail_init(&ring->in_flight, &done); |
| list_splice_tail_init(&ring->queue, &done); |
| canceled = true; |
| goto invoke_callback; |
| } |
| |
| while (!ring_empty(ring)) { |
| if (!(ring->descriptors[ring->tail].flags |
| & RING_DESC_COMPLETED)) |
| break; |
| frame = list_first_entry(&ring->in_flight, typeof(*frame), |
| list); |
| list_move_tail(&frame->list, &done); |
| if (!ring->is_tx) { |
| frame->size = ring->descriptors[ring->tail].length; |
| frame->eof = ring->descriptors[ring->tail].eof; |
| frame->sof = ring->descriptors[ring->tail].sof; |
| frame->flags = ring->descriptors[ring->tail].flags; |
| } |
| ring->tail = (ring->tail + 1) % ring->size; |
| } |
| ring_write_descriptors(ring); |
| |
| invoke_callback: |
| /* allow callbacks to schedule new work */ |
| spin_unlock_irqrestore(&ring->lock, flags); |
| while (!list_empty(&done)) { |
| frame = list_first_entry(&done, typeof(*frame), list); |
| /* |
| * The callback may reenqueue or delete frame. |
| * Do not hold on to it. |
| */ |
| list_del_init(&frame->list); |
| if (frame->callback) |
| frame->callback(ring, frame, canceled); |
| } |
| } |
| |
| int __tb_ring_enqueue(struct tb_ring *ring, struct ring_frame *frame) |
| { |
| unsigned long flags; |
| int ret = 0; |
| |
| spin_lock_irqsave(&ring->lock, flags); |
| if (ring->running) { |
| list_add_tail(&frame->list, &ring->queue); |
| ring_write_descriptors(ring); |
| } else { |
| ret = -ESHUTDOWN; |
| } |
| spin_unlock_irqrestore(&ring->lock, flags); |
| return ret; |
| } |
| EXPORT_SYMBOL_GPL(__tb_ring_enqueue); |
| |
| /** |
| * tb_ring_poll() - Poll one completed frame from the ring |
| * @ring: Ring to poll |
| * |
| * This function can be called when @start_poll callback of the @ring |
| * has been called. It will read one completed frame from the ring and |
| * return it to the caller. Returns %NULL if there is no more completed |
| * frames. |
| */ |
| struct ring_frame *tb_ring_poll(struct tb_ring *ring) |
| { |
| struct ring_frame *frame = NULL; |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ring->lock, flags); |
| if (!ring->running) |
| goto unlock; |
| if (ring_empty(ring)) |
| goto unlock; |
| |
| if (ring->descriptors[ring->tail].flags & RING_DESC_COMPLETED) { |
| frame = list_first_entry(&ring->in_flight, typeof(*frame), |
| list); |
| list_del_init(&frame->list); |
| |
| if (!ring->is_tx) { |
| frame->size = ring->descriptors[ring->tail].length; |
| frame->eof = ring->descriptors[ring->tail].eof; |
| frame->sof = ring->descriptors[ring->tail].sof; |
| frame->flags = ring->descriptors[ring->tail].flags; |
| } |
| |
| ring->tail = (ring->tail + 1) % ring->size; |
| } |
| |
| unlock: |
| spin_unlock_irqrestore(&ring->lock, flags); |
| return frame; |
| } |
| EXPORT_SYMBOL_GPL(tb_ring_poll); |
| |
| static void __ring_interrupt_mask(struct tb_ring *ring, bool mask) |
| { |
| int idx = ring_interrupt_index(ring); |
| int reg = REG_RING_INTERRUPT_BASE + idx / 32 * 4; |
| int bit = idx % 32; |
| u32 val; |
| |
| val = ioread32(ring->nhi->iobase + reg); |
| if (mask) |
| val &= ~BIT(bit); |
| else |
| val |= BIT(bit); |
| iowrite32(val, ring->nhi->iobase + reg); |
| } |
| |
| /* Both @nhi->lock and @ring->lock should be held */ |
| static void __ring_interrupt(struct tb_ring *ring) |
| { |
| if (!ring->running) |
| return; |
| |
| if (ring->start_poll) { |
| __ring_interrupt_mask(ring, true); |
| ring->start_poll(ring->poll_data); |
| } else { |
| schedule_work(&ring->work); |
| } |
| } |
| |
| /** |
| * tb_ring_poll_complete() - Re-start interrupt for the ring |
| * @ring: Ring to re-start the interrupt |
| * |
| * This will re-start (unmask) the ring interrupt once the user is done |
| * with polling. |
| */ |
| void tb_ring_poll_complete(struct tb_ring *ring) |
| { |
| unsigned long flags; |
| |
| spin_lock_irqsave(&ring->nhi->lock, flags); |
| spin_lock(&ring->lock); |
| if (ring->start_poll) |
| __ring_interrupt_mask(ring, false); |
| spin_unlock(&ring->lock); |
| spin_unlock_irqrestore(&ring->nhi->lock, flags); |
| } |
| EXPORT_SYMBOL_GPL(tb_ring_poll_complete); |
| |
| static irqreturn_t ring_msix(int irq, void *data) |
| { |
| struct tb_ring *ring = data; |
| |
| spin_lock(&ring->nhi->lock); |
| spin_lock(&ring->lock); |
| __ring_interrupt(ring); |
| spin_unlock(&ring->lock); |
| spin_unlock(&ring->nhi->lock); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int ring_request_msix(struct tb_ring *ring, bool no_suspend) |
| { |
| struct tb_nhi *nhi = ring->nhi; |
| unsigned long irqflags; |
| int ret; |
| |
| if (!nhi->pdev->msix_enabled) |
| return 0; |
| |
| ret = ida_simple_get(&nhi->msix_ida, 0, MSIX_MAX_VECS, GFP_KERNEL); |
| if (ret < 0) |
| return ret; |
| |
| ring->vector = ret; |
| |
| ring->irq = pci_irq_vector(ring->nhi->pdev, ring->vector); |
| if (ring->irq < 0) |
| return ring->irq; |
| |
| irqflags = no_suspend ? IRQF_NO_SUSPEND : 0; |
| return request_irq(ring->irq, ring_msix, irqflags, "thunderbolt", ring); |
| } |
| |
| static void ring_release_msix(struct tb_ring *ring) |
| { |
| if (ring->irq <= 0) |
| return; |
| |
| free_irq(ring->irq, ring); |
| ida_simple_remove(&ring->nhi->msix_ida, ring->vector); |
| ring->vector = 0; |
| ring->irq = 0; |
| } |
| |
| static int nhi_alloc_hop(struct tb_nhi *nhi, struct tb_ring *ring) |
| { |
| int ret = 0; |
| |
| spin_lock_irq(&nhi->lock); |
| |
| if (ring->hop < 0) { |
| unsigned int i; |
| |
| /* |
| * Automatically allocate HopID from the non-reserved |
| * range 8 .. hop_count - 1. |
| */ |
| for (i = RING_FIRST_USABLE_HOPID; i < nhi->hop_count; i++) { |
| if (ring->is_tx) { |
| if (!nhi->tx_rings[i]) { |
| ring->hop = i; |
| break; |
| } |
| } else { |
| if (!nhi->rx_rings[i]) { |
| ring->hop = i; |
| break; |
| } |
| } |
| } |
| } |
| |
| if (ring->hop < 0 || ring->hop >= nhi->hop_count) { |
| dev_warn(&nhi->pdev->dev, "invalid hop: %d\n", ring->hop); |
| ret = -EINVAL; |
| goto err_unlock; |
| } |
| if (ring->is_tx && nhi->tx_rings[ring->hop]) { |
| dev_warn(&nhi->pdev->dev, "TX hop %d already allocated\n", |
| ring->hop); |
| ret = -EBUSY; |
| goto err_unlock; |
| } else if (!ring->is_tx && nhi->rx_rings[ring->hop]) { |
| dev_warn(&nhi->pdev->dev, "RX hop %d already allocated\n", |
| ring->hop); |
| ret = -EBUSY; |
| goto err_unlock; |
| } |
| |
| if (ring->is_tx) |
| nhi->tx_rings[ring->hop] = ring; |
| else |
| nhi->rx_rings[ring->hop] = ring; |
| |
| err_unlock: |
| spin_unlock_irq(&nhi->lock); |
| |
| return ret; |
| } |
| |
| static struct tb_ring *tb_ring_alloc(struct tb_nhi *nhi, u32 hop, int size, |
| bool transmit, unsigned int flags, |
| u16 sof_mask, u16 eof_mask, |
| void (*start_poll)(void *), |
| void *poll_data) |
| { |
| struct tb_ring *ring = NULL; |
| |
| dev_dbg(&nhi->pdev->dev, "allocating %s ring %d of size %d\n", |
| transmit ? "TX" : "RX", hop, size); |
| |
| /* Tx Ring 2 is reserved for E2E workaround */ |
| if (transmit && hop == RING_E2E_UNUSED_HOPID) |
| return NULL; |
| |
| ring = kzalloc(sizeof(*ring), GFP_KERNEL); |
| if (!ring) |
| return NULL; |
| |
| spin_lock_init(&ring->lock); |
| INIT_LIST_HEAD(&ring->queue); |
| INIT_LIST_HEAD(&ring->in_flight); |
| INIT_WORK(&ring->work, ring_work); |
| |
| ring->nhi = nhi; |
| ring->hop = hop; |
| ring->is_tx = transmit; |
| ring->size = size; |
| ring->flags = flags; |
| ring->sof_mask = sof_mask; |
| ring->eof_mask = eof_mask; |
| ring->head = 0; |
| ring->tail = 0; |
| ring->running = false; |
| ring->start_poll = start_poll; |
| ring->poll_data = poll_data; |
| |
| ring->descriptors = dma_alloc_coherent(&ring->nhi->pdev->dev, |
| size * sizeof(*ring->descriptors), |
| &ring->descriptors_dma, GFP_KERNEL | __GFP_ZERO); |
| if (!ring->descriptors) |
| goto err_free_ring; |
| |
| if (ring_request_msix(ring, flags & RING_FLAG_NO_SUSPEND)) |
| goto err_free_descs; |
| |
| if (nhi_alloc_hop(nhi, ring)) |
| goto err_release_msix; |
| |
| return ring; |
| |
| err_release_msix: |
| ring_release_msix(ring); |
| err_free_descs: |
| dma_free_coherent(&ring->nhi->pdev->dev, |
| ring->size * sizeof(*ring->descriptors), |
| ring->descriptors, ring->descriptors_dma); |
| err_free_ring: |
| kfree(ring); |
| |
| return NULL; |
| } |
| |
| /** |
| * tb_ring_alloc_tx() - Allocate DMA ring for transmit |
| * @nhi: Pointer to the NHI the ring is to be allocated |
| * @hop: HopID (ring) to allocate |
| * @size: Number of entries in the ring |
| * @flags: Flags for the ring |
| */ |
| struct tb_ring *tb_ring_alloc_tx(struct tb_nhi *nhi, int hop, int size, |
| unsigned int flags) |
| { |
| return tb_ring_alloc(nhi, hop, size, true, flags, 0, 0, NULL, NULL); |
| } |
| EXPORT_SYMBOL_GPL(tb_ring_alloc_tx); |
| |
| /** |
| * tb_ring_alloc_rx() - Allocate DMA ring for receive |
| * @nhi: Pointer to the NHI the ring is to be allocated |
| * @hop: HopID (ring) to allocate. Pass %-1 for automatic allocation. |
| * @size: Number of entries in the ring |
| * @flags: Flags for the ring |
| * @sof_mask: Mask of PDF values that start a frame |
| * @eof_mask: Mask of PDF values that end a frame |
| * @start_poll: If not %NULL the ring will call this function when an |
| * interrupt is triggered and masked, instead of callback |
| * in each Rx frame. |
| * @poll_data: Optional data passed to @start_poll |
| */ |
| struct tb_ring *tb_ring_alloc_rx(struct tb_nhi *nhi, int hop, int size, |
| unsigned int flags, u16 sof_mask, u16 eof_mask, |
| void (*start_poll)(void *), void *poll_data) |
| { |
| return tb_ring_alloc(nhi, hop, size, false, flags, sof_mask, eof_mask, |
| start_poll, poll_data); |
| } |
| EXPORT_SYMBOL_GPL(tb_ring_alloc_rx); |
| |
| /** |
| * tb_ring_start() - enable a ring |
| * |
| * Must not be invoked in parallel with tb_ring_stop(). |
| */ |
| void tb_ring_start(struct tb_ring *ring) |
| { |
| u16 frame_size; |
| u32 flags; |
| |
| spin_lock_irq(&ring->nhi->lock); |
| spin_lock(&ring->lock); |
| if (ring->nhi->going_away) |
| goto err; |
| if (ring->running) { |
| dev_WARN(&ring->nhi->pdev->dev, "ring already started\n"); |
| goto err; |
| } |
| dev_dbg(&ring->nhi->pdev->dev, "starting %s %d\n", |
| RING_TYPE(ring), ring->hop); |
| |
| if (ring->flags & RING_FLAG_FRAME) { |
| /* Means 4096 */ |
| frame_size = 0; |
| flags = RING_FLAG_ENABLE; |
| } else { |
| frame_size = TB_FRAME_SIZE; |
| flags = RING_FLAG_ENABLE | RING_FLAG_RAW; |
| } |
| |
| if (ring->flags & RING_FLAG_E2E && !ring->is_tx) { |
| u32 hop; |
| |
| /* |
| * In order not to lose Rx packets we enable end-to-end |
| * workaround which transfers Rx credits to an unused Tx |
| * HopID. |
| */ |
| hop = RING_E2E_UNUSED_HOPID << REG_RX_OPTIONS_E2E_HOP_SHIFT; |
| hop &= REG_RX_OPTIONS_E2E_HOP_MASK; |
| flags |= hop | RING_FLAG_E2E_FLOW_CONTROL; |
| } |
| |
| ring_iowrite64desc(ring, ring->descriptors_dma, 0); |
| if (ring->is_tx) { |
| ring_iowrite32desc(ring, ring->size, 12); |
| ring_iowrite32options(ring, 0, 4); /* time releated ? */ |
| ring_iowrite32options(ring, flags, 0); |
| } else { |
| u32 sof_eof_mask = ring->sof_mask << 16 | ring->eof_mask; |
| |
| ring_iowrite32desc(ring, (frame_size << 16) | ring->size, 12); |
| ring_iowrite32options(ring, sof_eof_mask, 4); |
| ring_iowrite32options(ring, flags, 0); |
| } |
| ring_interrupt_active(ring, true); |
| ring->running = true; |
| err: |
| spin_unlock(&ring->lock); |
| spin_unlock_irq(&ring->nhi->lock); |
| } |
| EXPORT_SYMBOL_GPL(tb_ring_start); |
| |
| /** |
| * tb_ring_stop() - shutdown a ring |
| * |
| * Must not be invoked from a callback. |
| * |
| * This method will disable the ring. Further calls to |
| * tb_ring_tx/tb_ring_rx will return -ESHUTDOWN until ring_stop has been |
| * called. |
| * |
| * All enqueued frames will be canceled and their callbacks will be executed |
| * with frame->canceled set to true (on the callback thread). This method |
| * returns only after all callback invocations have finished. |
| */ |
| void tb_ring_stop(struct tb_ring *ring) |
| { |
| spin_lock_irq(&ring->nhi->lock); |
| spin_lock(&ring->lock); |
| dev_dbg(&ring->nhi->pdev->dev, "stopping %s %d\n", |
| RING_TYPE(ring), ring->hop); |
| if (ring->nhi->going_away) |
| goto err; |
| if (!ring->running) { |
| dev_WARN(&ring->nhi->pdev->dev, "%s %d already stopped\n", |
| RING_TYPE(ring), ring->hop); |
| goto err; |
| } |
| ring_interrupt_active(ring, false); |
| |
| ring_iowrite32options(ring, 0, 0); |
| ring_iowrite64desc(ring, 0, 0); |
| ring_iowrite32desc(ring, 0, 8); |
| ring_iowrite32desc(ring, 0, 12); |
| ring->head = 0; |
| ring->tail = 0; |
| ring->running = false; |
| |
| err: |
| spin_unlock(&ring->lock); |
| spin_unlock_irq(&ring->nhi->lock); |
| |
| /* |
| * schedule ring->work to invoke callbacks on all remaining frames. |
| */ |
| schedule_work(&ring->work); |
| flush_work(&ring->work); |
| } |
| EXPORT_SYMBOL_GPL(tb_ring_stop); |
| |
| /* |
| * tb_ring_free() - free ring |
| * |
| * When this method returns all invocations of ring->callback will have |
| * finished. |
| * |
| * Ring must be stopped. |
| * |
| * Must NOT be called from ring_frame->callback! |
| */ |
| void tb_ring_free(struct tb_ring *ring) |
| { |
| spin_lock_irq(&ring->nhi->lock); |
| /* |
| * Dissociate the ring from the NHI. This also ensures that |
| * nhi_interrupt_work cannot reschedule ring->work. |
| */ |
| if (ring->is_tx) |
| ring->nhi->tx_rings[ring->hop] = NULL; |
| else |
| ring->nhi->rx_rings[ring->hop] = NULL; |
| |
| if (ring->running) { |
| dev_WARN(&ring->nhi->pdev->dev, "%s %d still running\n", |
| RING_TYPE(ring), ring->hop); |
| } |
| spin_unlock_irq(&ring->nhi->lock); |
| |
| ring_release_msix(ring); |
| |
| dma_free_coherent(&ring->nhi->pdev->dev, |
| ring->size * sizeof(*ring->descriptors), |
| ring->descriptors, ring->descriptors_dma); |
| |
| ring->descriptors = NULL; |
| ring->descriptors_dma = 0; |
| |
| |
| dev_dbg(&ring->nhi->pdev->dev, "freeing %s %d\n", RING_TYPE(ring), |
| ring->hop); |
| |
| /** |
| * ring->work can no longer be scheduled (it is scheduled only |
| * by nhi_interrupt_work, ring_stop and ring_msix). Wait for it |
| * to finish before freeing the ring. |
| */ |
| flush_work(&ring->work); |
| kfree(ring); |
| } |
| EXPORT_SYMBOL_GPL(tb_ring_free); |
| |
| /** |
| * nhi_mailbox_cmd() - Send a command through NHI mailbox |
| * @nhi: Pointer to the NHI structure |
| * @cmd: Command to send |
| * @data: Data to be send with the command |
| * |
| * Sends mailbox command to the firmware running on NHI. Returns %0 in |
| * case of success and negative errno in case of failure. |
| */ |
| int nhi_mailbox_cmd(struct tb_nhi *nhi, enum nhi_mailbox_cmd cmd, u32 data) |
| { |
| ktime_t timeout; |
| u32 val; |
| |
| iowrite32(data, nhi->iobase + REG_INMAIL_DATA); |
| |
| val = ioread32(nhi->iobase + REG_INMAIL_CMD); |
| val &= ~(REG_INMAIL_CMD_MASK | REG_INMAIL_ERROR); |
| val |= REG_INMAIL_OP_REQUEST | cmd; |
| iowrite32(val, nhi->iobase + REG_INMAIL_CMD); |
| |
| timeout = ktime_add_ms(ktime_get(), NHI_MAILBOX_TIMEOUT); |
| do { |
| val = ioread32(nhi->iobase + REG_INMAIL_CMD); |
| if (!(val & REG_INMAIL_OP_REQUEST)) |
| break; |
| usleep_range(10, 20); |
| } while (ktime_before(ktime_get(), timeout)); |
| |
| if (val & REG_INMAIL_OP_REQUEST) |
| return -ETIMEDOUT; |
| if (val & REG_INMAIL_ERROR) |
| return -EIO; |
| |
| return 0; |
| } |
| |
| /** |
| * nhi_mailbox_mode() - Return current firmware operation mode |
| * @nhi: Pointer to the NHI structure |
| * |
| * The function reads current firmware operation mode using NHI mailbox |
| * registers and returns it to the caller. |
| */ |
| enum nhi_fw_mode nhi_mailbox_mode(struct tb_nhi *nhi) |
| { |
| u32 val; |
| |
| val = ioread32(nhi->iobase + REG_OUTMAIL_CMD); |
| val &= REG_OUTMAIL_CMD_OPMODE_MASK; |
| val >>= REG_OUTMAIL_CMD_OPMODE_SHIFT; |
| |
| return (enum nhi_fw_mode)val; |
| } |
| |
| static void nhi_interrupt_work(struct work_struct *work) |
| { |
| struct tb_nhi *nhi = container_of(work, typeof(*nhi), interrupt_work); |
| int value = 0; /* Suppress uninitialized usage warning. */ |
| int bit; |
| int hop = -1; |
| int type = 0; /* current interrupt type 0: TX, 1: RX, 2: RX overflow */ |
| struct tb_ring *ring; |
| |
| spin_lock_irq(&nhi->lock); |
| |
| /* |
| * Starting at REG_RING_NOTIFY_BASE there are three status bitfields |
| * (TX, RX, RX overflow). We iterate over the bits and read a new |
| * dwords as required. The registers are cleared on read. |
| */ |
| for (bit = 0; bit < 3 * nhi->hop_count; bit++) { |
| if (bit % 32 == 0) |
| value = ioread32(nhi->iobase |
| + REG_RING_NOTIFY_BASE |
| + 4 * (bit / 32)); |
| if (++hop == nhi->hop_count) { |
| hop = 0; |
| type++; |
| } |
| if ((value & (1 << (bit % 32))) == 0) |
| continue; |
| if (type == 2) { |
| dev_warn(&nhi->pdev->dev, |
| "RX overflow for ring %d\n", |
| hop); |
| continue; |
| } |
| if (type == 0) |
| ring = nhi->tx_rings[hop]; |
| else |
| ring = nhi->rx_rings[hop]; |
| if (ring == NULL) { |
| dev_warn(&nhi->pdev->dev, |
| "got interrupt for inactive %s ring %d\n", |
| type ? "RX" : "TX", |
| hop); |
| continue; |
| } |
| |
| spin_lock(&ring->lock); |
| __ring_interrupt(ring); |
| spin_unlock(&ring->lock); |
| } |
| spin_unlock_irq(&nhi->lock); |
| } |
| |
| static irqreturn_t nhi_msi(int irq, void *data) |
| { |
| struct tb_nhi *nhi = data; |
| schedule_work(&nhi->interrupt_work); |
| return IRQ_HANDLED; |
| } |
| |
| static int __nhi_suspend_noirq(struct device *dev, bool wakeup) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct tb *tb = pci_get_drvdata(pdev); |
| struct tb_nhi *nhi = tb->nhi; |
| int ret; |
| |
| ret = tb_domain_suspend_noirq(tb); |
| if (ret) |
| return ret; |
| |
| if (nhi->ops && nhi->ops->suspend_noirq) { |
| ret = nhi->ops->suspend_noirq(tb->nhi, wakeup); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int nhi_suspend_noirq(struct device *dev) |
| { |
| return __nhi_suspend_noirq(dev, device_may_wakeup(dev)); |
| } |
| |
| static bool nhi_wake_supported(struct pci_dev *pdev) |
| { |
| u8 val; |
| |
| /* |
| * If power rails are sustainable for wakeup from S4 this |
| * property is set by the BIOS. |
| */ |
| if (device_property_read_u8(&pdev->dev, "WAKE_SUPPORTED", &val)) |
| return !!val; |
| |
| return true; |
| } |
| |
| static int nhi_poweroff_noirq(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| bool wakeup; |
| |
| wakeup = device_may_wakeup(dev) && nhi_wake_supported(pdev); |
| return __nhi_suspend_noirq(dev, wakeup); |
| } |
| |
| static void nhi_enable_int_throttling(struct tb_nhi *nhi) |
| { |
| /* Throttling is specified in 256ns increments */ |
| u32 throttle = DIV_ROUND_UP(128 * NSEC_PER_USEC, 256); |
| unsigned int i; |
| |
| /* |
| * Configure interrupt throttling for all vectors even if we |
| * only use few. |
| */ |
| for (i = 0; i < MSIX_MAX_VECS; i++) { |
| u32 reg = REG_INT_THROTTLING_RATE + i * 4; |
| iowrite32(throttle, nhi->iobase + reg); |
| } |
| } |
| |
| static int nhi_resume_noirq(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct tb *tb = pci_get_drvdata(pdev); |
| struct tb_nhi *nhi = tb->nhi; |
| int ret; |
| |
| /* |
| * Check that the device is still there. It may be that the user |
| * unplugged last device which causes the host controller to go |
| * away on PCs. |
| */ |
| if (!pci_device_is_present(pdev)) { |
| nhi->going_away = true; |
| } else { |
| if (nhi->ops && nhi->ops->resume_noirq) { |
| ret = nhi->ops->resume_noirq(nhi); |
| if (ret) |
| return ret; |
| } |
| nhi_enable_int_throttling(tb->nhi); |
| } |
| |
| return tb_domain_resume_noirq(tb); |
| } |
| |
| static int nhi_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct tb *tb = pci_get_drvdata(pdev); |
| |
| return tb_domain_suspend(tb); |
| } |
| |
| static void nhi_complete(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct tb *tb = pci_get_drvdata(pdev); |
| |
| /* |
| * If we were runtime suspended when system suspend started, |
| * schedule runtime resume now. It should bring the domain back |
| * to functional state. |
| */ |
| if (pm_runtime_suspended(&pdev->dev)) |
| pm_runtime_resume(&pdev->dev); |
| else |
| tb_domain_complete(tb); |
| } |
| |
| static int nhi_runtime_suspend(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct tb *tb = pci_get_drvdata(pdev); |
| struct tb_nhi *nhi = tb->nhi; |
| int ret; |
| |
| ret = tb_domain_runtime_suspend(tb); |
| if (ret) |
| return ret; |
| |
| if (nhi->ops && nhi->ops->runtime_suspend) { |
| ret = nhi->ops->runtime_suspend(tb->nhi); |
| if (ret) |
| return ret; |
| } |
| return 0; |
| } |
| |
| static int nhi_runtime_resume(struct device *dev) |
| { |
| struct pci_dev *pdev = to_pci_dev(dev); |
| struct tb *tb = pci_get_drvdata(pdev); |
| struct tb_nhi *nhi = tb->nhi; |
| int ret; |
| |
| if (nhi->ops && nhi->ops->runtime_resume) { |
| ret = nhi->ops->runtime_resume(nhi); |
| if (ret) |
| return ret; |
| } |
| |
| nhi_enable_int_throttling(nhi); |
| return tb_domain_runtime_resume(tb); |
| } |
| |
| static void nhi_shutdown(struct tb_nhi *nhi) |
| { |
| int i; |
| |
| dev_dbg(&nhi->pdev->dev, "shutdown\n"); |
| |
| for (i = 0; i < nhi->hop_count; i++) { |
| if (nhi->tx_rings[i]) |
| dev_WARN(&nhi->pdev->dev, |
| "TX ring %d is still active\n", i); |
| if (nhi->rx_rings[i]) |
| dev_WARN(&nhi->pdev->dev, |
| "RX ring %d is still active\n", i); |
| } |
| nhi_disable_interrupts(nhi); |
| /* |
| * We have to release the irq before calling flush_work. Otherwise an |
| * already executing IRQ handler could call schedule_work again. |
| */ |
| if (!nhi->pdev->msix_enabled) { |
| devm_free_irq(&nhi->pdev->dev, nhi->pdev->irq, nhi); |
| flush_work(&nhi->interrupt_work); |
| } |
| ida_destroy(&nhi->msix_ida); |
| |
| if (nhi->ops && nhi->ops->shutdown) |
| nhi->ops->shutdown(nhi); |
| } |
| |
| static int nhi_init_msi(struct tb_nhi *nhi) |
| { |
| struct pci_dev *pdev = nhi->pdev; |
| int res, irq, nvec; |
| |
| /* In case someone left them on. */ |
| nhi_disable_interrupts(nhi); |
| |
| nhi_enable_int_throttling(nhi); |
| |
| ida_init(&nhi->msix_ida); |
| |
| /* |
| * The NHI has 16 MSI-X vectors or a single MSI. We first try to |
| * get all MSI-X vectors and if we succeed, each ring will have |
| * one MSI-X. If for some reason that does not work out, we |
| * fallback to a single MSI. |
| */ |
| nvec = pci_alloc_irq_vectors(pdev, MSIX_MIN_VECS, MSIX_MAX_VECS, |
| PCI_IRQ_MSIX); |
| if (nvec < 0) { |
| nvec = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI); |
| if (nvec < 0) |
| return nvec; |
| |
| INIT_WORK(&nhi->interrupt_work, nhi_interrupt_work); |
| |
| irq = pci_irq_vector(nhi->pdev, 0); |
| if (irq < 0) |
| return irq; |
| |
| res = devm_request_irq(&pdev->dev, irq, nhi_msi, |
| IRQF_NO_SUSPEND, "thunderbolt", nhi); |
| if (res) { |
| dev_err(&pdev->dev, "request_irq failed, aborting\n"); |
| return res; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static bool nhi_imr_valid(struct pci_dev *pdev) |
| { |
| u8 val; |
| |
| if (!device_property_read_u8(&pdev->dev, "IMR_VALID", &val)) |
| return !!val; |
| |
| return true; |
| } |
| |
| static int nhi_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| { |
| struct tb_nhi *nhi; |
| struct tb *tb; |
| int res; |
| |
| if (!nhi_imr_valid(pdev)) { |
| dev_warn(&pdev->dev, "firmware image not valid, aborting\n"); |
| return -ENODEV; |
| } |
| |
| res = pcim_enable_device(pdev); |
| if (res) { |
| dev_err(&pdev->dev, "cannot enable PCI device, aborting\n"); |
| return res; |
| } |
| |
| res = pcim_iomap_regions(pdev, 1 << 0, "thunderbolt"); |
| if (res) { |
| dev_err(&pdev->dev, "cannot obtain PCI resources, aborting\n"); |
| return res; |
| } |
| |
| nhi = devm_kzalloc(&pdev->dev, sizeof(*nhi), GFP_KERNEL); |
| if (!nhi) |
| return -ENOMEM; |
| |
| nhi->pdev = pdev; |
| nhi->ops = (const struct tb_nhi_ops *)id->driver_data; |
| /* cannot fail - table is allocated bin pcim_iomap_regions */ |
| nhi->iobase = pcim_iomap_table(pdev)[0]; |
| nhi->hop_count = ioread32(nhi->iobase + REG_HOP_COUNT) & 0x3ff; |
| if (nhi->hop_count != 12 && nhi->hop_count != 32) |
| dev_warn(&pdev->dev, "unexpected hop count: %d\n", |
| nhi->hop_count); |
| |
| nhi->tx_rings = devm_kcalloc(&pdev->dev, nhi->hop_count, |
| sizeof(*nhi->tx_rings), GFP_KERNEL); |
| nhi->rx_rings = devm_kcalloc(&pdev->dev, nhi->hop_count, |
| sizeof(*nhi->rx_rings), GFP_KERNEL); |
| if (!nhi->tx_rings || !nhi->rx_rings) |
| return -ENOMEM; |
| |
| res = nhi_init_msi(nhi); |
| if (res) { |
| dev_err(&pdev->dev, "cannot enable MSI, aborting\n"); |
| return res; |
| } |
| |
| spin_lock_init(&nhi->lock); |
| |
| res = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); |
| if (res) |
| res = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); |
| if (res) { |
| dev_err(&pdev->dev, "failed to set DMA mask\n"); |
| return res; |
| } |
| |
| pci_set_master(pdev); |
| |
| if (nhi->ops && nhi->ops->init) { |
| res = nhi->ops->init(nhi); |
| if (res) |
| return res; |
| } |
| |
| tb = icm_probe(nhi); |
| if (!tb) |
| tb = tb_probe(nhi); |
| if (!tb) { |
| dev_err(&nhi->pdev->dev, |
| "failed to determine connection manager, aborting\n"); |
| return -ENODEV; |
| } |
| |
| dev_dbg(&nhi->pdev->dev, "NHI initialized, starting thunderbolt\n"); |
| |
| res = tb_domain_add(tb); |
| if (res) { |
| /* |
| * At this point the RX/TX rings might already have been |
| * activated. Do a proper shutdown. |
| */ |
| tb_domain_put(tb); |
| nhi_shutdown(nhi); |
| return res; |
| } |
| pci_set_drvdata(pdev, tb); |
| |
| pm_runtime_allow(&pdev->dev); |
| pm_runtime_set_autosuspend_delay(&pdev->dev, TB_AUTOSUSPEND_DELAY); |
| pm_runtime_use_autosuspend(&pdev->dev); |
| pm_runtime_put_autosuspend(&pdev->dev); |
| |
| return 0; |
| } |
| |
| static void nhi_remove(struct pci_dev *pdev) |
| { |
| struct tb *tb = pci_get_drvdata(pdev); |
| struct tb_nhi *nhi = tb->nhi; |
| |
| pm_runtime_get_sync(&pdev->dev); |
| pm_runtime_dont_use_autosuspend(&pdev->dev); |
| pm_runtime_forbid(&pdev->dev); |
| |
| tb_domain_remove(tb); |
| nhi_shutdown(nhi); |
| } |
| |
| /* |
| * The tunneled pci bridges are siblings of us. Use resume_noirq to reenable |
| * the tunnels asap. A corresponding pci quirk blocks the downstream bridges |
| * resume_noirq until we are done. |
| */ |
| static const struct dev_pm_ops nhi_pm_ops = { |
| .suspend_noirq = nhi_suspend_noirq, |
| .resume_noirq = nhi_resume_noirq, |
| .freeze_noirq = nhi_suspend_noirq, /* |
| * we just disable hotplug, the |
| * pci-tunnels stay alive. |
| */ |
| .thaw_noirq = nhi_resume_noirq, |
| .restore_noirq = nhi_resume_noirq, |
| .suspend = nhi_suspend, |
| .freeze = nhi_suspend, |
| .poweroff_noirq = nhi_poweroff_noirq, |
| .poweroff = nhi_suspend, |
| .complete = nhi_complete, |
| .runtime_suspend = nhi_runtime_suspend, |
| .runtime_resume = nhi_runtime_resume, |
| }; |
| |
| static struct pci_device_id nhi_ids[] = { |
| /* |
| * We have to specify class, the TB bridges use the same device and |
| * vendor (sub)id on gen 1 and gen 2 controllers. |
| */ |
| { |
| .class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_LIGHT_RIDGE, |
| .subvendor = 0x2222, .subdevice = 0x1111, |
| }, |
| { |
| .class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_CACTUS_RIDGE_4C, |
| .subvendor = 0x2222, .subdevice = 0x1111, |
| }, |
| { |
| .class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_FALCON_RIDGE_2C_NHI, |
| .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, |
| }, |
| { |
| .class = PCI_CLASS_SYSTEM_OTHER << 8, .class_mask = ~0, |
| .vendor = PCI_VENDOR_ID_INTEL, |
| .device = PCI_DEVICE_ID_INTEL_FALCON_RIDGE_4C_NHI, |
| .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, |
| }, |
| |
| /* Thunderbolt 3 */ |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_USBONLY_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_USBONLY_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_2C_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_4C_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_C_USBONLY_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TITAN_RIDGE_2C_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_TITAN_RIDGE_4C_NHI) }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICL_NHI0), |
| .driver_data = (kernel_ulong_t)&icl_nhi_ops }, |
| { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICL_NHI1), |
| .driver_data = (kernel_ulong_t)&icl_nhi_ops }, |
| |
| { 0,} |
| }; |
| |
| MODULE_DEVICE_TABLE(pci, nhi_ids); |
| MODULE_LICENSE("GPL"); |
| |
| static struct pci_driver nhi_driver = { |
| .name = "thunderbolt", |
| .id_table = nhi_ids, |
| .probe = nhi_probe, |
| .remove = nhi_remove, |
| .driver.pm = &nhi_pm_ops, |
| }; |
| |
| static int __init nhi_init(void) |
| { |
| int ret; |
| |
| ret = tb_domain_init(); |
| if (ret) |
| return ret; |
| ret = pci_register_driver(&nhi_driver); |
| if (ret) |
| tb_domain_exit(); |
| return ret; |
| } |
| |
| static void __exit nhi_unload(void) |
| { |
| pci_unregister_driver(&nhi_driver); |
| tb_domain_exit(); |
| } |
| |
| rootfs_initcall(nhi_init); |
| module_exit(nhi_unload); |