drivers/bcma/driver_chipcommon_pmu.c - linux - Git at Google

 /*
  * Broadcom specific AMBA
  * ChipCommon Power Management Unit driver
  *
  * Copyright 2009, Michael Buesch <m@bues.ch>
  * Copyright 2007, 2011, Broadcom Corporation
  * Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
  *
  * Licensed under the GNU/GPL. See COPYING for details.
  */

 #include "bcma_private.h"
 #include <linux/export.h>
 #include <linux/bcma/bcma.h>

 static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
 {
 	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
 	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
 	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
 }

 void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
 {
 	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
 	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
 	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
 }
 EXPORT_SYMBOL_GPL(bcma_chipco_pll_write);

 void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
 			     u32 set)
 {
 	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
 	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
 	bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set);
 }
 EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset);

 void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
 				 u32 offset, u32 mask, u32 set)
 {
 	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
 	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
 	bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set);
 }
 EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset);

 void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
 				u32 set)
 {
 	bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset);
 	bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR);
 	bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set);
 }
 EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);

 static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;
 	u32 min_msk = 0, max_msk = 0;

 	switch (bus->chipinfo.id) {
 	case BCMA_CHIP_ID_BCM4313:
 		min_msk = 0x200D;
 		max_msk = 0xFFFF;
 		break;
 	default:
 		bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
 			   bus->chipinfo.id);
 	}

 	/* Set the resource masks. */
 	if (min_msk)
 		bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
 	if (max_msk)
 		bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);

 	/*
 	 * Add some delay; allow resources to come up and settle.
 	 * Delay is required for SoC (early init).
 	 */
 	mdelay(2);
 }

 /* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
 void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable)
 {
 	struct bcma_bus *bus = cc->core->bus;
 	u32 val;

 	val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL);
 	if (enable) {
 		val |= BCMA_CHIPCTL_4331_EXTPA_EN;
 		if (bus->chipinfo.pkg == 9 || bus->chipinfo.pkg == 11)
 			val |= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
 		else if (bus->chipinfo.rev > 0)
 			val |= BCMA_CHIPCTL_4331_EXTPA_EN2;
 	} else {
 		val &= ~BCMA_CHIPCTL_4331_EXTPA_EN;
 		val &= ~BCMA_CHIPCTL_4331_EXTPA_EN2;
 		val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
 	}
 	bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
 }

 static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;

 	switch (bus->chipinfo.id) {
 	case BCMA_CHIP_ID_BCM4313:
 		/* enable 12 mA drive strenth for 4313 and set chipControl
 		   register bit 1 */
 		bcma_chipco_chipctl_maskset(cc, 0,
 					    ~BCMA_CCTRL_4313_12MA_LED_DRIVE,
 					    BCMA_CCTRL_4313_12MA_LED_DRIVE);
 		break;
 	case BCMA_CHIP_ID_BCM4331:
 	case BCMA_CHIP_ID_BCM43431:
 		/* Ext PA lines must be enabled for tx on BCM4331 */
 		bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
 		break;
 	case BCMA_CHIP_ID_BCM43224:
 	case BCMA_CHIP_ID_BCM43421:
 		/* enable 12 mA drive strenth for 43224 and set chipControl
 		   register bit 15 */
 		if (bus->chipinfo.rev == 0) {
 			bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
 					  ~BCMA_CCTRL_43224_GPIO_TOGGLE,
 					  BCMA_CCTRL_43224_GPIO_TOGGLE);
 			bcma_chipco_chipctl_maskset(cc, 0,
 						    ~BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
 						    BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
 		} else {
 			bcma_chipco_chipctl_maskset(cc, 0,
 						    ~BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
 						    BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
 		}
 		break;
 	default:
 		bcma_debug(bus, "Workarounds unknown or not needed for device 0x%04X\n",
 			   bus->chipinfo.id);
 	}
 }

 void bcma_pmu_early_init(struct bcma_drv_cc *cc)
 {
 	u32 pmucap;

 	pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
 	cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);

 	bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
 		   cc->pmu.rev, pmucap);
 }

 void bcma_pmu_init(struct bcma_drv_cc *cc)
 {
 	if (cc->pmu.rev == 1)
 		bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
 			      ~BCMA_CC_PMU_CTL_NOILPONW);
 	else
 		bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
 			     BCMA_CC_PMU_CTL_NOILPONW);

 	bcma_pmu_resources_init(cc);
 	bcma_pmu_workarounds(cc);
 }

 u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;

 	switch (bus->chipinfo.id) {
 	case BCMA_CHIP_ID_BCM4716:
 	case BCMA_CHIP_ID_BCM4748:
 	case BCMA_CHIP_ID_BCM47162:
 	case BCMA_CHIP_ID_BCM4313:
 	case BCMA_CHIP_ID_BCM5357:
 	case BCMA_CHIP_ID_BCM4749:
 	case BCMA_CHIP_ID_BCM53572:
 		/* always 20Mhz */
 		return 20000 * 1000;
 	case BCMA_CHIP_ID_BCM5356:
 	case BCMA_CHIP_ID_BCM4706:
 		/* always 25Mhz */
 		return 25000 * 1000;
 	default:
 		bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
 	}
 	return BCMA_CC_PMU_ALP_CLOCK;
 }

 /* Find the output of the "m" pll divider given pll controls that start with
  * pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
  */
 static u32 bcma_pmu_pll_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
 {
 	u32 tmp, div, ndiv, p1, p2, fc;
 	struct bcma_bus *bus = cc->core->bus;

 	BUG_ON((pll0 & 3) || (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0));

 	BUG_ON(!m || m > 4);

 	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
 	    bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) {
 		/* Detect failure in clock setting */
 		tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
 		if (tmp & 0x40000)
 			return 133 * 1000000;
 	}

 	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF);
 	p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT;
 	p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT;

 	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF);
 	div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) &
 		BCMA_CC_PPL_MDIV_MASK;

 	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF);
 	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;

 	/* Do calculation in Mhz */
 	fc = bcma_pmu_get_alp_clock(cc) / 1000000;
 	fc = (p1 * ndiv * fc) / p2;

 	/* Return clock in Hertz */
 	return (fc / div) * 1000000;
 }

 static u32 bcma_pmu_pll_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
 {
 	u32 tmp, ndiv, p1div, p2div;
 	u32 clock;

 	BUG_ON(!m || m > 4);

 	/* Get N, P1 and P2 dividers to determine CPU clock */
 	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PMU6_4706_PROCPLL_OFF);
 	ndiv = (tmp & BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK)
 		>> BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT;
 	p1div = (tmp & BCMA_CC_PMU6_4706_PROC_P1DIV_MASK)
 		>> BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT;
 	p2div = (tmp & BCMA_CC_PMU6_4706_PROC_P2DIV_MASK)
 		>> BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT;

 	tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
 	if (tmp & BCMA_CC_CHIPST_4706_PKG_OPTION)
 		/* Low cost bonding: Fixed reference clock 25MHz and m = 4 */
 		clock = (25000000 / 4) * ndiv * p2div / p1div;
 	else
 		/* Fixed reference clock 25MHz and m = 2 */
 		clock = (25000000 / 2) * ndiv * p2div / p1div;

 	if (m == BCMA_CC_PMU5_MAINPLL_SSB)
 		clock = clock / 4;

 	return clock;
 }

 /* query bus clock frequency for PMU-enabled chipcommon */
 static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;

 	switch (bus->chipinfo.id) {
 	case BCMA_CHIP_ID_BCM4716:
 	case BCMA_CHIP_ID_BCM4748:
 	case BCMA_CHIP_ID_BCM47162:
 		return bcma_pmu_pll_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
 					  BCMA_CC_PMU5_MAINPLL_SSB);
 	case BCMA_CHIP_ID_BCM5356:
 		return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
 					  BCMA_CC_PMU5_MAINPLL_SSB);
 	case BCMA_CHIP_ID_BCM5357:
 	case BCMA_CHIP_ID_BCM4749:
 		return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
 					  BCMA_CC_PMU5_MAINPLL_SSB);
 	case BCMA_CHIP_ID_BCM4706:
 		return bcma_pmu_pll_clock_bcm4706(cc,
 						  BCMA_CC_PMU4706_MAINPLL_PLL0,
 						  BCMA_CC_PMU5_MAINPLL_SSB);
 	case BCMA_CHIP_ID_BCM53572:
 		return 75000000;
 	default:
 		bcma_warn(bus, "No bus clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
 			  bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
 	}
 	return BCMA_CC_PMU_HT_CLOCK;
 }

 /* query cpu clock frequency for PMU-enabled chipcommon */
 u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
 {
 	struct bcma_bus *bus = cc->core->bus;

 	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572)
 		return 300000000;

 	/* New PMUs can have different clock for bus and CPU */
 	if (cc->pmu.rev >= 5) {
 		u32 pll;
 		switch (bus->chipinfo.id) {
 		case BCMA_CHIP_ID_BCM4706:
 			return bcma_pmu_pll_clock_bcm4706(cc,
 						BCMA_CC_PMU4706_MAINPLL_PLL0,
 						BCMA_CC_PMU5_MAINPLL_CPU);
 		case BCMA_CHIP_ID_BCM5356:
 			pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
 			break;
 		case BCMA_CHIP_ID_BCM5357:
 		case BCMA_CHIP_ID_BCM4749:
 			pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
 			break;
 		default:
 			pll = BCMA_CC_PMU4716_MAINPLL_PLL0;
 			break;
 		}

 		return bcma_pmu_pll_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
 	}

 	/* On old PMUs CPU has the same clock as the bus */
 	return bcma_pmu_get_bus_clock(cc);
 }

 static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
 					 u32 value)
 {
 	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
 	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
 }

 void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid)
 {
 	u32 tmp = 0;
 	u8 phypll_offset = 0;
 	u8 bcm5357_bcm43236_p1div[] = {0x1, 0x5, 0x5};
 	u8 bcm5357_bcm43236_ndiv[] = {0x30, 0xf6, 0xfc};
 	struct bcma_bus *bus = cc->core->bus;

 	switch (bus->chipinfo.id) {
 	case BCMA_CHIP_ID_BCM5357:
 	case BCMA_CHIP_ID_BCM4749:
 	case BCMA_CHIP_ID_BCM53572:
 		/* 5357[ab]0, 43236[ab]0, and 6362b0 */

 		/* BCM5357 needs to touch PLL1_PLLCTL[02],
 		   so offset PLL0_PLLCTL[02] by 6 */
 		phypll_offset = (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 ||
 		       bus->chipinfo.id == BCMA_CHIP_ID_BCM4749 ||
 		       bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0;

 		/* RMW only the P1 divider */
 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
 				BCMA_CC_PMU_PLL_CTL0 + phypll_offset);
 		tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
 		tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK));
 		tmp |= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT);
 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);

 		/* RMW only the int feedback divider */
 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
 				BCMA_CC_PMU_PLL_CTL2 + phypll_offset);
 		tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
 		tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK);
 		tmp |= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
 		bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);

 		tmp = 1 << 10;
 		break;

 	case BCMA_CHIP_ID_BCM4331:
 	case BCMA_CHIP_ID_BCM43431:
 		if (spuravoid == 2) {
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
 						     0x11500014);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x0FC00a08);
 		} else if (spuravoid == 1) {
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
 						     0x11500014);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x0F600a08);
 		} else {
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
 						     0x11100014);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x03000a08);
 		}
 		tmp = 1 << 10;
 		break;

 	case BCMA_CHIP_ID_BCM43224:
 	case BCMA_CHIP_ID_BCM43225:
 	case BCMA_CHIP_ID_BCM43421:
 		if (spuravoid == 1) {
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
 						     0x11500010);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
 						     0x000C0C06);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x0F600a08);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
 						     0x00000000);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
 						     0x2001E920);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 						     0x88888815);
 		} else {
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
 						     0x11100010);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
 						     0x000c0c06);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x03000a08);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
 						     0x00000000);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
 						     0x200005c0);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 						     0x88888815);
 		}
 		tmp = 1 << 10;
 		break;

 	case BCMA_CHIP_ID_BCM4716:
 	case BCMA_CHIP_ID_BCM4748:
 	case BCMA_CHIP_ID_BCM47162:
 		if (spuravoid == 1) {
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
 						     0x11500060);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
 						     0x080C0C06);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x0F600000);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
 						     0x00000000);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
 						     0x2001E924);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 						     0x88888815);
 		} else {
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
 						     0x11100060);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
 						     0x080c0c06);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x03000000);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
 						     0x00000000);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
 						     0x200005c0);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 						     0x88888815);
 		}

 		tmp = 3 << 9;
 		break;

 	case BCMA_CHIP_ID_BCM43227:
 	case BCMA_CHIP_ID_BCM43228:
 	case BCMA_CHIP_ID_BCM43428:
 		/* LCNXN */
 		/* PLL Settings for spur avoidance on/off mode,
 		   no on2 support for 43228A0 */
 		if (spuravoid == 1) {
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
 						     0x01100014);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
 						     0x040C0C06);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x03140A08);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
 						     0x00333333);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
 						     0x202C2820);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 						     0x88888815);
 		} else {
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
 						     0x11100014);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
 						     0x040c0c06);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
 						     0x03000a08);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
 						     0x00000000);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
 						     0x200005c0);
 			bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
 						     0x88888815);
 		}
 		tmp = 1 << 10;
 		break;
 	default:
 		bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
 			 bus->chipinfo.id);
 		break;
 	}

 	tmp |= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
 	bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
 }
 EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);
	/*
	* Broadcom specific AMBA
	* ChipCommon Power Management Unit driver
	*
	* Copyright 2009, Michael Buesch <m@bues.ch>
	* Copyright 2007, 2011, Broadcom Corporation
	* Copyright 2011, 2012, Hauke Mehrtens <hauke@hauke-m.de>
	*
	* Licensed under the GNU/GPL. See COPYING for details.
	*/

	#include "bcma_private.h"
	#include <linux/export.h>
	#include <linux/bcma/bcma.h>

	static u32 bcma_chipco_pll_read(struct bcma_drv_cc *cc, u32 offset)
	{
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
	return bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
	}

	void bcma_chipco_pll_write(struct bcma_drv_cc *cc, u32 offset, u32 value)
	{
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
	}
	EXPORT_SYMBOL_GPL(bcma_chipco_pll_write);

	void bcma_chipco_pll_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
	u32 set)
	{
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
	bcma_cc_read32(cc, BCMA_CC_PLLCTL_ADDR);
	bcma_cc_maskset32(cc, BCMA_CC_PLLCTL_DATA, mask, set);
	}
	EXPORT_SYMBOL_GPL(bcma_chipco_pll_maskset);

	void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc,
	u32 offset, u32 mask, u32 set)
	{
	bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset);
	bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR);
	bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL_DATA, mask, set);
	}
	EXPORT_SYMBOL_GPL(bcma_chipco_chipctl_maskset);

	void bcma_chipco_regctl_maskset(struct bcma_drv_cc *cc, u32 offset, u32 mask,
	u32 set)
	{
	bcma_cc_write32(cc, BCMA_CC_REGCTL_ADDR, offset);
	bcma_cc_read32(cc, BCMA_CC_REGCTL_ADDR);
	bcma_cc_maskset32(cc, BCMA_CC_REGCTL_DATA, mask, set);
	}
	EXPORT_SYMBOL_GPL(bcma_chipco_regctl_maskset);

	static void bcma_pmu_resources_init(struct bcma_drv_cc *cc)
	{
	struct bcma_bus *bus = cc->core->bus;
	u32 min_msk = 0, max_msk = 0;

	switch (bus->chipinfo.id) {
	case BCMA_CHIP_ID_BCM4313:
	min_msk = 0x200D;
	max_msk = 0xFFFF;
	break;
	default:
	bcma_debug(bus, "PMU resource config unknown or not needed for device 0x%04X\n",
	bus->chipinfo.id);
	}

	/* Set the resource masks. */
	if (min_msk)
	bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk);
	if (max_msk)
	bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk);

	/*
	* Add some delay; allow resources to come up and settle.
	* Delay is required for SoC (early init).
	*/
	mdelay(2);
	}

	/* Disable to allow reading SPROM. Don't know the adventages of enabling it. */
	void bcma_chipco_bcm4331_ext_pa_lines_ctl(struct bcma_drv_cc *cc, bool enable)
	{
	struct bcma_bus *bus = cc->core->bus;
	u32 val;

	val = bcma_cc_read32(cc, BCMA_CC_CHIPCTL);
	if (enable) {
	val \|= BCMA_CHIPCTL_4331_EXTPA_EN;
	if (bus->chipinfo.pkg == 9 \|\| bus->chipinfo.pkg == 11)
	val \|= BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
	else if (bus->chipinfo.rev > 0)
	val \|= BCMA_CHIPCTL_4331_EXTPA_EN2;
	} else {
	val &= ~BCMA_CHIPCTL_4331_EXTPA_EN;
	val &= ~BCMA_CHIPCTL_4331_EXTPA_EN2;
	val &= ~BCMA_CHIPCTL_4331_EXTPA_ON_GPIO2_5;
	}
	bcma_cc_write32(cc, BCMA_CC_CHIPCTL, val);
	}

	static void bcma_pmu_workarounds(struct bcma_drv_cc *cc)
	{
	struct bcma_bus *bus = cc->core->bus;

	switch (bus->chipinfo.id) {
	case BCMA_CHIP_ID_BCM4313:
	/* enable 12 mA drive strenth for 4313 and set chipControl
	register bit 1 */
	bcma_chipco_chipctl_maskset(cc, 0,
	~BCMA_CCTRL_4313_12MA_LED_DRIVE,
	BCMA_CCTRL_4313_12MA_LED_DRIVE);
	break;
	case BCMA_CHIP_ID_BCM4331:
	case BCMA_CHIP_ID_BCM43431:
	/* Ext PA lines must be enabled for tx on BCM4331 */
	bcma_chipco_bcm4331_ext_pa_lines_ctl(cc, true);
	break;
	case BCMA_CHIP_ID_BCM43224:
	case BCMA_CHIP_ID_BCM43421:
	/* enable 12 mA drive strenth for 43224 and set chipControl
	register bit 15 */
	if (bus->chipinfo.rev == 0) {
	bcma_cc_maskset32(cc, BCMA_CC_CHIPCTL,
	~BCMA_CCTRL_43224_GPIO_TOGGLE,
	BCMA_CCTRL_43224_GPIO_TOGGLE);
	bcma_chipco_chipctl_maskset(cc, 0,
	~BCMA_CCTRL_43224A0_12MA_LED_DRIVE,
	BCMA_CCTRL_43224A0_12MA_LED_DRIVE);
	} else {
	bcma_chipco_chipctl_maskset(cc, 0,
	~BCMA_CCTRL_43224B0_12MA_LED_DRIVE,
	BCMA_CCTRL_43224B0_12MA_LED_DRIVE);
	}
	break;
	default:
	bcma_debug(bus, "Workarounds unknown or not needed for device 0x%04X\n",
	bus->chipinfo.id);
	}
	}

	void bcma_pmu_early_init(struct bcma_drv_cc *cc)
	{
	u32 pmucap;

	pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP);
	cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION);

	bcma_debug(cc->core->bus, "Found rev %u PMU (capabilities 0x%08X)\n",
	cc->pmu.rev, pmucap);
	}

	void bcma_pmu_init(struct bcma_drv_cc *cc)
	{
	if (cc->pmu.rev == 1)
	bcma_cc_mask32(cc, BCMA_CC_PMU_CTL,
	~BCMA_CC_PMU_CTL_NOILPONW);
	else
	bcma_cc_set32(cc, BCMA_CC_PMU_CTL,
	BCMA_CC_PMU_CTL_NOILPONW);

	bcma_pmu_resources_init(cc);
	bcma_pmu_workarounds(cc);
	}

	u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc)
	{
	struct bcma_bus *bus = cc->core->bus;

	switch (bus->chipinfo.id) {
	case BCMA_CHIP_ID_BCM4716:
	case BCMA_CHIP_ID_BCM4748:
	case BCMA_CHIP_ID_BCM47162:
	case BCMA_CHIP_ID_BCM4313:
	case BCMA_CHIP_ID_BCM5357:
	case BCMA_CHIP_ID_BCM4749:
	case BCMA_CHIP_ID_BCM53572:
	/* always 20Mhz */
	return 20000 * 1000;
	case BCMA_CHIP_ID_BCM5356:
	case BCMA_CHIP_ID_BCM4706:
	/* always 25Mhz */
	return 25000 * 1000;
	default:
	bcma_warn(bus, "No ALP clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
	bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_ALP_CLOCK);
	}
	return BCMA_CC_PMU_ALP_CLOCK;
	}

	/* Find the output of the "m" pll divider given pll controls that start with
	* pllreg "pll0" i.e. 12 for main 6 for phy, 0 for misc.
	*/
	static u32 bcma_pmu_pll_clock(struct bcma_drv_cc *cc, u32 pll0, u32 m)
	{
	u32 tmp, div, ndiv, p1, p2, fc;
	struct bcma_bus *bus = cc->core->bus;

	BUG_ON((pll0 & 3) \|\| (pll0 > BCMA_CC_PMU4716_MAINPLL_PLL0));

	BUG_ON(!m \|\| m > 4);

	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 \|\|
	bus->chipinfo.id == BCMA_CHIP_ID_BCM4749) {
	/* Detect failure in clock setting */
	tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
	if (tmp & 0x40000)
	return 133 * 1000000;
	}

	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_P1P2_OFF);
	p1 = (tmp & BCMA_CC_PPL_P1_MASK) >> BCMA_CC_PPL_P1_SHIFT;
	p2 = (tmp & BCMA_CC_PPL_P2_MASK) >> BCMA_CC_PPL_P2_SHIFT;

	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_M14_OFF);
	div = (tmp >> ((m - 1) * BCMA_CC_PPL_MDIV_WIDTH)) &
	BCMA_CC_PPL_MDIV_MASK;

	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PPL_NM5_OFF);
	ndiv = (tmp & BCMA_CC_PPL_NDIV_MASK) >> BCMA_CC_PPL_NDIV_SHIFT;

	/* Do calculation in Mhz */
	fc = bcma_pmu_get_alp_clock(cc) / 1000000;
	fc = (p1 * ndiv * fc) / p2;

	/* Return clock in Hertz */
	return (fc / div) * 1000000;
	}

	static u32 bcma_pmu_pll_clock_bcm4706(struct bcma_drv_cc *cc, u32 pll0, u32 m)
	{
	u32 tmp, ndiv, p1div, p2div;
	u32 clock;

	BUG_ON(!m \|\| m > 4);

	/* Get N, P1 and P2 dividers to determine CPU clock */
	tmp = bcma_chipco_pll_read(cc, pll0 + BCMA_CC_PMU6_4706_PROCPLL_OFF);
	ndiv = (tmp & BCMA_CC_PMU6_4706_PROC_NDIV_INT_MASK)
	>> BCMA_CC_PMU6_4706_PROC_NDIV_INT_SHIFT;
	p1div = (tmp & BCMA_CC_PMU6_4706_PROC_P1DIV_MASK)
	>> BCMA_CC_PMU6_4706_PROC_P1DIV_SHIFT;
	p2div = (tmp & BCMA_CC_PMU6_4706_PROC_P2DIV_MASK)
	>> BCMA_CC_PMU6_4706_PROC_P2DIV_SHIFT;

	tmp = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT);
	if (tmp & BCMA_CC_CHIPST_4706_PKG_OPTION)
	/* Low cost bonding: Fixed reference clock 25MHz and m = 4 */
	clock = (25000000 / 4) * ndiv * p2div / p1div;
	else
	/* Fixed reference clock 25MHz and m = 2 */
	clock = (25000000 / 2) * ndiv * p2div / p1div;

	if (m == BCMA_CC_PMU5_MAINPLL_SSB)
	clock = clock / 4;

	return clock;
	}

	/* query bus clock frequency for PMU-enabled chipcommon */
	static u32 bcma_pmu_get_bus_clock(struct bcma_drv_cc *cc)
	{
	struct bcma_bus *bus = cc->core->bus;

	switch (bus->chipinfo.id) {
	case BCMA_CHIP_ID_BCM4716:
	case BCMA_CHIP_ID_BCM4748:
	case BCMA_CHIP_ID_BCM47162:
	return bcma_pmu_pll_clock(cc, BCMA_CC_PMU4716_MAINPLL_PLL0,
	BCMA_CC_PMU5_MAINPLL_SSB);
	case BCMA_CHIP_ID_BCM5356:
	return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5356_MAINPLL_PLL0,
	BCMA_CC_PMU5_MAINPLL_SSB);
	case BCMA_CHIP_ID_BCM5357:
	case BCMA_CHIP_ID_BCM4749:
	return bcma_pmu_pll_clock(cc, BCMA_CC_PMU5357_MAINPLL_PLL0,
	BCMA_CC_PMU5_MAINPLL_SSB);
	case BCMA_CHIP_ID_BCM4706:
	return bcma_pmu_pll_clock_bcm4706(cc,
	BCMA_CC_PMU4706_MAINPLL_PLL0,
	BCMA_CC_PMU5_MAINPLL_SSB);
	case BCMA_CHIP_ID_BCM53572:
	return 75000000;
	default:
	bcma_warn(bus, "No bus clock specified for %04X device, pmu rev. %d, using default %d Hz\n",
	bus->chipinfo.id, cc->pmu.rev, BCMA_CC_PMU_HT_CLOCK);
	}
	return BCMA_CC_PMU_HT_CLOCK;
	}

	/* query cpu clock frequency for PMU-enabled chipcommon */
	u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc)
	{
	struct bcma_bus *bus = cc->core->bus;

	if (bus->chipinfo.id == BCMA_CHIP_ID_BCM53572)
	return 300000000;

	/* New PMUs can have different clock for bus and CPU */
	if (cc->pmu.rev >= 5) {
	u32 pll;
	switch (bus->chipinfo.id) {
	case BCMA_CHIP_ID_BCM4706:
	return bcma_pmu_pll_clock_bcm4706(cc,
	BCMA_CC_PMU4706_MAINPLL_PLL0,
	BCMA_CC_PMU5_MAINPLL_CPU);
	case BCMA_CHIP_ID_BCM5356:
	pll = BCMA_CC_PMU5356_MAINPLL_PLL0;
	break;
	case BCMA_CHIP_ID_BCM5357:
	case BCMA_CHIP_ID_BCM4749:
	pll = BCMA_CC_PMU5357_MAINPLL_PLL0;
	break;
	default:
	pll = BCMA_CC_PMU4716_MAINPLL_PLL0;
	break;
	}

	return bcma_pmu_pll_clock(cc, pll, BCMA_CC_PMU5_MAINPLL_CPU);
	}

	/* On old PMUs CPU has the same clock as the bus */
	return bcma_pmu_get_bus_clock(cc);
	}

	static void bcma_pmu_spuravoid_pll_write(struct bcma_drv_cc *cc, u32 offset,
	u32 value)
	{
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR, offset);
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, value);
	}

	void bcma_pmu_spuravoid_pllupdate(struct bcma_drv_cc *cc, int spuravoid)
	{
	u32 tmp = 0;
	u8 phypll_offset = 0;
	u8 bcm5357_bcm43236_p1div[] = {0x1, 0x5, 0x5};
	u8 bcm5357_bcm43236_ndiv[] = {0x30, 0xf6, 0xfc};
	struct bcma_bus *bus = cc->core->bus;

	switch (bus->chipinfo.id) {
	case BCMA_CHIP_ID_BCM5357:
	case BCMA_CHIP_ID_BCM4749:
	case BCMA_CHIP_ID_BCM53572:
	/* 5357[ab]0, 43236[ab]0, and 6362b0 */

	/* BCM5357 needs to touch PLL1_PLLCTL[02],
	so offset PLL0_PLLCTL[02] by 6 */
	phypll_offset = (bus->chipinfo.id == BCMA_CHIP_ID_BCM5357 \|\|
	bus->chipinfo.id == BCMA_CHIP_ID_BCM4749 \|\|
	bus->chipinfo.id == BCMA_CHIP_ID_BCM53572) ? 6 : 0;

	/* RMW only the P1 divider */
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
	BCMA_CC_PMU_PLL_CTL0 + phypll_offset);
	tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
	tmp &= (~(BCMA_CC_PMU1_PLL0_PC0_P1DIV_MASK));
	tmp \|= (bcm5357_bcm43236_p1div[spuravoid] << BCMA_CC_PMU1_PLL0_PC0_P1DIV_SHIFT);
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);

	/* RMW only the int feedback divider */
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_ADDR,
	BCMA_CC_PMU_PLL_CTL2 + phypll_offset);
	tmp = bcma_cc_read32(cc, BCMA_CC_PLLCTL_DATA);
	tmp &= ~(BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_MASK);
	tmp \|= (bcm5357_bcm43236_ndiv[spuravoid]) << BCMA_CC_PMU1_PLL0_PC2_NDIV_INT_SHIFT;
	bcma_cc_write32(cc, BCMA_CC_PLLCTL_DATA, tmp);

	tmp = 1 << 10;
	break;

	case BCMA_CHIP_ID_BCM4331:
	case BCMA_CHIP_ID_BCM43431:
	if (spuravoid == 2) {
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
	0x11500014);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
	0x0FC00a08);
	} else if (spuravoid == 1) {
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
	0x11500014);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
	0x0F600a08);
	} else {
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
	0x11100014);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
	0x03000a08);
	}
	tmp = 1 << 10;
	break;

	case BCMA_CHIP_ID_BCM43224:
	case BCMA_CHIP_ID_BCM43225:
	case BCMA_CHIP_ID_BCM43421:
	if (spuravoid == 1) {
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
	0x11500010);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
	0x000C0C06);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
	0x0F600a08);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
	0x00000000);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
	0x2001E920);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
	0x88888815);
	} else {
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
	0x11100010);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
	0x000c0c06);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
	0x03000a08);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
	0x00000000);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
	0x200005c0);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
	0x88888815);
	}
	tmp = 1 << 10;
	break;

	case BCMA_CHIP_ID_BCM4716:
	case BCMA_CHIP_ID_BCM4748:
	case BCMA_CHIP_ID_BCM47162:
	if (spuravoid == 1) {
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
	0x11500060);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
	0x080C0C06);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
	0x0F600000);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
	0x00000000);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
	0x2001E924);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
	0x88888815);
	} else {
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
	0x11100060);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
	0x080c0c06);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
	0x03000000);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
	0x00000000);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
	0x200005c0);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
	0x88888815);
	}

	tmp = 3 << 9;
	break;

	case BCMA_CHIP_ID_BCM43227:
	case BCMA_CHIP_ID_BCM43228:
	case BCMA_CHIP_ID_BCM43428:
	/* LCNXN */
	/* PLL Settings for spur avoidance on/off mode,
	no on2 support for 43228A0 */
	if (spuravoid == 1) {
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
	0x01100014);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
	0x040C0C06);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
	0x03140A08);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
	0x00333333);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
	0x202C2820);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
	0x88888815);
	} else {
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL0,
	0x11100014);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL1,
	0x040c0c06);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL2,
	0x03000a08);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL3,
	0x00000000);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL4,
	0x200005c0);
	bcma_pmu_spuravoid_pll_write(cc, BCMA_CC_PMU_PLL_CTL5,
	0x88888815);
	}
	tmp = 1 << 10;
	break;
	default:
	bcma_err(bus, "Unknown spuravoidance settings for chip 0x%04X, not changing PLL\n",
	bus->chipinfo.id);
	break;
	}

	tmp \|= bcma_cc_read32(cc, BCMA_CC_PMU_CTL);
	bcma_cc_write32(cc, BCMA_CC_PMU_CTL, tmp);
	}
	EXPORT_SYMBOL_GPL(bcma_pmu_spuravoid_pllupdate);