| // SPDX-License-Identifier: GPL-2.0 |
| |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/errno.h> |
| #include <linux/fs.h> |
| #include <linux/fsi-sbefifo.h> |
| #include <linux/gfp.h> |
| #include <linux/idr.h> |
| #include <linux/kernel.h> |
| #include <linux/list.h> |
| #include <linux/miscdevice.h> |
| #include <linux/mm.h> |
| #include <linux/module.h> |
| #include <linux/mutex.h> |
| #include <linux/fsi-occ.h> |
| #include <linux/of.h> |
| #include <linux/of_platform.h> |
| #include <linux/platform_device.h> |
| #include <linux/sched.h> |
| #include <linux/slab.h> |
| #include <linux/uaccess.h> |
| #include <linux/unaligned.h> |
| |
| #define OCC_SRAM_BYTES 4096 |
| #define OCC_CMD_DATA_BYTES 4090 |
| #define OCC_RESP_DATA_BYTES 4089 |
| |
| #define OCC_P9_SRAM_CMD_ADDR 0xFFFBE000 |
| #define OCC_P9_SRAM_RSP_ADDR 0xFFFBF000 |
| |
| #define OCC_P10_SRAM_CMD_ADDR 0xFFFFD000 |
| #define OCC_P10_SRAM_RSP_ADDR 0xFFFFE000 |
| |
| #define OCC_P10_SRAM_MODE 0x58 /* Normal mode, OCB channel 2 */ |
| |
| #define OCC_TIMEOUT_MS 1000 |
| #define OCC_CMD_IN_PRG_WAIT_MS 50 |
| |
| enum versions { occ_p9, occ_p10 }; |
| |
| struct occ { |
| struct device *dev; |
| struct device *sbefifo; |
| char name[32]; |
| int idx; |
| bool platform_hwmon; |
| u8 sequence_number; |
| void *buffer; |
| void *client_buffer; |
| size_t client_buffer_size; |
| size_t client_response_size; |
| enum versions version; |
| struct miscdevice mdev; |
| struct mutex occ_lock; |
| }; |
| |
| #define to_occ(x) container_of((x), struct occ, mdev) |
| |
| struct occ_response { |
| u8 seq_no; |
| u8 cmd_type; |
| u8 return_status; |
| __be16 data_length; |
| u8 data[OCC_RESP_DATA_BYTES + 2]; /* two bytes checksum */ |
| } __packed; |
| |
| struct occ_client { |
| struct occ *occ; |
| struct mutex lock; |
| size_t data_size; |
| size_t read_offset; |
| u8 *buffer; |
| }; |
| |
| #define to_client(x) container_of((x), struct occ_client, xfr) |
| |
| static DEFINE_IDA(occ_ida); |
| |
| static int occ_open(struct inode *inode, struct file *file) |
| { |
| struct occ_client *client = kzalloc(sizeof(*client), GFP_KERNEL); |
| struct miscdevice *mdev = file->private_data; |
| struct occ *occ = to_occ(mdev); |
| |
| if (!client) |
| return -ENOMEM; |
| |
| client->buffer = (u8 *)__get_free_page(GFP_KERNEL); |
| if (!client->buffer) { |
| kfree(client); |
| return -ENOMEM; |
| } |
| |
| client->occ = occ; |
| mutex_init(&client->lock); |
| file->private_data = client; |
| get_device(occ->dev); |
| |
| /* We allocate a 1-page buffer, make sure it all fits */ |
| BUILD_BUG_ON((OCC_CMD_DATA_BYTES + 3) > PAGE_SIZE); |
| BUILD_BUG_ON((OCC_RESP_DATA_BYTES + 7) > PAGE_SIZE); |
| |
| return 0; |
| } |
| |
| static ssize_t occ_read(struct file *file, char __user *buf, size_t len, |
| loff_t *offset) |
| { |
| struct occ_client *client = file->private_data; |
| ssize_t rc = 0; |
| |
| if (!client) |
| return -ENODEV; |
| |
| if (len > OCC_SRAM_BYTES) |
| return -EINVAL; |
| |
| mutex_lock(&client->lock); |
| |
| /* This should not be possible ... */ |
| if (WARN_ON_ONCE(client->read_offset > client->data_size)) { |
| rc = -EIO; |
| goto done; |
| } |
| |
| /* Grab how much data we have to read */ |
| rc = min(len, client->data_size - client->read_offset); |
| if (copy_to_user(buf, client->buffer + client->read_offset, rc)) |
| rc = -EFAULT; |
| else |
| client->read_offset += rc; |
| |
| done: |
| mutex_unlock(&client->lock); |
| |
| return rc; |
| } |
| |
| static ssize_t occ_write(struct file *file, const char __user *buf, |
| size_t len, loff_t *offset) |
| { |
| struct occ_client *client = file->private_data; |
| size_t rlen, data_length; |
| ssize_t rc; |
| u8 *cmd; |
| |
| if (!client) |
| return -ENODEV; |
| |
| if (len > (OCC_CMD_DATA_BYTES + 3) || len < 3) |
| return -EINVAL; |
| |
| mutex_lock(&client->lock); |
| |
| /* Construct the command */ |
| cmd = client->buffer; |
| |
| /* |
| * Copy the user command (assume user data follows the occ command |
| * format) |
| * byte 0: command type |
| * bytes 1-2: data length (msb first) |
| * bytes 3-n: data |
| */ |
| if (copy_from_user(&cmd[1], buf, len)) { |
| rc = -EFAULT; |
| goto done; |
| } |
| |
| /* Extract data length */ |
| data_length = (cmd[2] << 8) + cmd[3]; |
| if (data_length > OCC_CMD_DATA_BYTES) { |
| rc = -EINVAL; |
| goto done; |
| } |
| |
| /* Submit command; 4 bytes before the data and 2 bytes after */ |
| rlen = PAGE_SIZE; |
| rc = fsi_occ_submit(client->occ->dev, cmd, data_length + 6, cmd, |
| &rlen); |
| if (rc) |
| goto done; |
| |
| /* Set read tracking data */ |
| client->data_size = rlen; |
| client->read_offset = 0; |
| |
| /* Done */ |
| rc = len; |
| |
| done: |
| mutex_unlock(&client->lock); |
| |
| return rc; |
| } |
| |
| static int occ_release(struct inode *inode, struct file *file) |
| { |
| struct occ_client *client = file->private_data; |
| |
| put_device(client->occ->dev); |
| free_page((unsigned long)client->buffer); |
| kfree(client); |
| |
| return 0; |
| } |
| |
| static const struct file_operations occ_fops = { |
| .owner = THIS_MODULE, |
| .open = occ_open, |
| .read = occ_read, |
| .write = occ_write, |
| .release = occ_release, |
| }; |
| |
| static void occ_save_ffdc(struct occ *occ, __be32 *resp, size_t parsed_len, |
| size_t resp_len) |
| { |
| if (resp_len > parsed_len) { |
| size_t dh = resp_len - parsed_len; |
| size_t ffdc_len = (dh - 1) * 4; /* SBE words are four bytes */ |
| __be32 *ffdc = &resp[parsed_len]; |
| |
| if (ffdc_len > occ->client_buffer_size) |
| ffdc_len = occ->client_buffer_size; |
| |
| memcpy(occ->client_buffer, ffdc, ffdc_len); |
| occ->client_response_size = ffdc_len; |
| } |
| } |
| |
| static int occ_verify_checksum(struct occ *occ, struct occ_response *resp, |
| u16 data_length) |
| { |
| /* Fetch the two bytes after the data for the checksum. */ |
| u16 checksum_resp = get_unaligned_be16(&resp->data[data_length]); |
| u16 checksum; |
| u16 i; |
| |
| checksum = resp->seq_no; |
| checksum += resp->cmd_type; |
| checksum += resp->return_status; |
| checksum += (data_length >> 8) + (data_length & 0xFF); |
| |
| for (i = 0; i < data_length; ++i) |
| checksum += resp->data[i]; |
| |
| if (checksum != checksum_resp) { |
| dev_err(occ->dev, "Bad checksum: %04x!=%04x\n", checksum, |
| checksum_resp); |
| return -EBADE; |
| } |
| |
| return 0; |
| } |
| |
| static int occ_getsram(struct occ *occ, u32 offset, void *data, ssize_t len) |
| { |
| u32 data_len = ((len + 7) / 8) * 8; /* must be multiples of 8 B */ |
| size_t cmd_len, parsed_len, resp_data_len; |
| size_t resp_len = OCC_MAX_RESP_WORDS; |
| __be32 *resp = occ->buffer; |
| __be32 cmd[6]; |
| int idx = 0, rc; |
| |
| /* |
| * Magic sequence to do SBE getsram command. SBE will fetch data from |
| * specified SRAM address. |
| */ |
| switch (occ->version) { |
| default: |
| case occ_p9: |
| cmd_len = 5; |
| cmd[2] = cpu_to_be32(1); /* Normal mode */ |
| cmd[3] = cpu_to_be32(OCC_P9_SRAM_RSP_ADDR + offset); |
| break; |
| case occ_p10: |
| idx = 1; |
| cmd_len = 6; |
| cmd[2] = cpu_to_be32(OCC_P10_SRAM_MODE); |
| cmd[3] = 0; |
| cmd[4] = cpu_to_be32(OCC_P10_SRAM_RSP_ADDR + offset); |
| break; |
| } |
| |
| cmd[0] = cpu_to_be32(cmd_len); |
| cmd[1] = cpu_to_be32(SBEFIFO_CMD_GET_OCC_SRAM); |
| cmd[4 + idx] = cpu_to_be32(data_len); |
| |
| rc = sbefifo_submit(occ->sbefifo, cmd, cmd_len, resp, &resp_len); |
| if (rc) |
| return rc; |
| |
| rc = sbefifo_parse_status(occ->sbefifo, SBEFIFO_CMD_GET_OCC_SRAM, |
| resp, resp_len, &parsed_len); |
| if (rc > 0) { |
| dev_err(occ->dev, "SRAM read returned failure status: %08x\n", |
| rc); |
| occ_save_ffdc(occ, resp, parsed_len, resp_len); |
| return -ECOMM; |
| } else if (rc) { |
| return rc; |
| } |
| |
| resp_data_len = be32_to_cpu(resp[parsed_len - 1]); |
| if (resp_data_len != data_len) { |
| dev_err(occ->dev, "SRAM read expected %d bytes got %zd\n", |
| data_len, resp_data_len); |
| rc = -EBADMSG; |
| } else { |
| memcpy(data, resp, len); |
| } |
| |
| return rc; |
| } |
| |
| static int occ_putsram(struct occ *occ, const void *data, ssize_t len, |
| u8 seq_no, u16 checksum) |
| { |
| u32 data_len = ((len + 7) / 8) * 8; /* must be multiples of 8 B */ |
| size_t cmd_len, parsed_len, resp_data_len; |
| size_t resp_len = OCC_MAX_RESP_WORDS; |
| __be32 *buf = occ->buffer; |
| u8 *byte_buf; |
| int idx = 0, rc; |
| |
| cmd_len = (occ->version == occ_p10) ? 6 : 5; |
| cmd_len += data_len >> 2; |
| |
| /* |
| * Magic sequence to do SBE putsram command. SBE will transfer |
| * data to specified SRAM address. |
| */ |
| buf[0] = cpu_to_be32(cmd_len); |
| buf[1] = cpu_to_be32(SBEFIFO_CMD_PUT_OCC_SRAM); |
| |
| switch (occ->version) { |
| default: |
| case occ_p9: |
| buf[2] = cpu_to_be32(1); /* Normal mode */ |
| buf[3] = cpu_to_be32(OCC_P9_SRAM_CMD_ADDR); |
| break; |
| case occ_p10: |
| idx = 1; |
| buf[2] = cpu_to_be32(OCC_P10_SRAM_MODE); |
| buf[3] = 0; |
| buf[4] = cpu_to_be32(OCC_P10_SRAM_CMD_ADDR); |
| break; |
| } |
| |
| buf[4 + idx] = cpu_to_be32(data_len); |
| memcpy(&buf[5 + idx], data, len); |
| |
| byte_buf = (u8 *)&buf[5 + idx]; |
| /* |
| * Overwrite the first byte with our sequence number and the last two |
| * bytes with the checksum. |
| */ |
| byte_buf[0] = seq_no; |
| byte_buf[len - 2] = checksum >> 8; |
| byte_buf[len - 1] = checksum & 0xff; |
| |
| rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len); |
| if (rc) |
| return rc; |
| |
| rc = sbefifo_parse_status(occ->sbefifo, SBEFIFO_CMD_PUT_OCC_SRAM, |
| buf, resp_len, &parsed_len); |
| if (rc > 0) { |
| dev_err(occ->dev, "SRAM write returned failure status: %08x\n", |
| rc); |
| occ_save_ffdc(occ, buf, parsed_len, resp_len); |
| return -ECOMM; |
| } else if (rc) { |
| return rc; |
| } |
| |
| if (parsed_len != 1) { |
| dev_err(occ->dev, "SRAM write response length invalid: %zd\n", |
| parsed_len); |
| rc = -EBADMSG; |
| } else { |
| resp_data_len = be32_to_cpu(buf[0]); |
| if (resp_data_len != data_len) { |
| dev_err(occ->dev, |
| "SRAM write expected %d bytes got %zd\n", |
| data_len, resp_data_len); |
| rc = -EBADMSG; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static int occ_trigger_attn(struct occ *occ) |
| { |
| __be32 *buf = occ->buffer; |
| size_t cmd_len, parsed_len, resp_data_len; |
| size_t resp_len = OCC_MAX_RESP_WORDS; |
| int idx = 0, rc; |
| |
| switch (occ->version) { |
| default: |
| case occ_p9: |
| cmd_len = 7; |
| buf[2] = cpu_to_be32(3); /* Circular mode */ |
| buf[3] = 0; |
| break; |
| case occ_p10: |
| idx = 1; |
| cmd_len = 8; |
| buf[2] = cpu_to_be32(0xd0); /* Circular mode, OCB Channel 1 */ |
| buf[3] = 0; |
| buf[4] = 0; |
| break; |
| } |
| |
| buf[0] = cpu_to_be32(cmd_len); /* Chip-op length in words */ |
| buf[1] = cpu_to_be32(SBEFIFO_CMD_PUT_OCC_SRAM); |
| buf[4 + idx] = cpu_to_be32(8); /* Data length in bytes */ |
| buf[5 + idx] = cpu_to_be32(0x20010000); /* Trigger OCC attention */ |
| buf[6 + idx] = 0; |
| |
| rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len); |
| if (rc) |
| return rc; |
| |
| rc = sbefifo_parse_status(occ->sbefifo, SBEFIFO_CMD_PUT_OCC_SRAM, |
| buf, resp_len, &parsed_len); |
| if (rc > 0) { |
| dev_err(occ->dev, "SRAM attn returned failure status: %08x\n", |
| rc); |
| occ_save_ffdc(occ, buf, parsed_len, resp_len); |
| return -ECOMM; |
| } else if (rc) { |
| return rc; |
| } |
| |
| if (parsed_len != 1) { |
| dev_err(occ->dev, "SRAM attn response length invalid: %zd\n", |
| parsed_len); |
| rc = -EBADMSG; |
| } else { |
| resp_data_len = be32_to_cpu(buf[0]); |
| if (resp_data_len != 8) { |
| dev_err(occ->dev, |
| "SRAM attn expected 8 bytes got %zd\n", |
| resp_data_len); |
| rc = -EBADMSG; |
| } |
| } |
| |
| return rc; |
| } |
| |
| static bool fsi_occ_response_not_ready(struct occ_response *resp, u8 seq_no, |
| u8 cmd_type) |
| { |
| return resp->return_status == OCC_RESP_CMD_IN_PRG || |
| resp->return_status == OCC_RESP_CRIT_INIT || |
| resp->seq_no != seq_no || resp->cmd_type != cmd_type; |
| } |
| |
| int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, |
| void *response, size_t *resp_len) |
| { |
| const unsigned long timeout = msecs_to_jiffies(OCC_TIMEOUT_MS); |
| const unsigned long wait_time = |
| msecs_to_jiffies(OCC_CMD_IN_PRG_WAIT_MS); |
| struct occ *occ = dev_get_drvdata(dev); |
| struct occ_response *resp = response; |
| size_t user_resp_len = *resp_len; |
| u8 seq_no; |
| u8 cmd_type; |
| u16 checksum = 0; |
| u16 resp_data_length; |
| const u8 *byte_request = (const u8 *)request; |
| unsigned long end; |
| int rc; |
| size_t i; |
| |
| *resp_len = 0; |
| |
| if (!occ) |
| return -ENODEV; |
| |
| if (user_resp_len < 7) { |
| dev_dbg(dev, "Bad resplen %zd\n", user_resp_len); |
| return -EINVAL; |
| } |
| |
| cmd_type = byte_request[1]; |
| |
| /* Checksum the request, ignoring first byte (sequence number). */ |
| for (i = 1; i < req_len - 2; ++i) |
| checksum += byte_request[i]; |
| |
| rc = mutex_lock_interruptible(&occ->occ_lock); |
| if (rc) |
| return rc; |
| |
| occ->client_buffer = response; |
| occ->client_buffer_size = user_resp_len; |
| occ->client_response_size = 0; |
| |
| if (!occ->buffer) { |
| rc = -ENOENT; |
| goto done; |
| } |
| |
| /* |
| * Get a sequence number and update the counter. Avoid a sequence |
| * number of 0 which would pass the response check below even if the |
| * OCC response is uninitialized. Any sequence number the user is |
| * trying to send is overwritten since this function is the only common |
| * interface to the OCC and therefore the only place we can guarantee |
| * unique sequence numbers. |
| */ |
| seq_no = occ->sequence_number++; |
| if (!occ->sequence_number) |
| occ->sequence_number = 1; |
| checksum += seq_no; |
| |
| rc = occ_putsram(occ, request, req_len, seq_no, checksum); |
| if (rc) |
| goto done; |
| |
| rc = occ_trigger_attn(occ); |
| if (rc) |
| goto done; |
| |
| end = jiffies + timeout; |
| while (true) { |
| /* Read occ response header */ |
| rc = occ_getsram(occ, 0, resp, 8); |
| if (rc) |
| goto done; |
| |
| if (fsi_occ_response_not_ready(resp, seq_no, cmd_type)) { |
| if (time_after(jiffies, end)) { |
| dev_err(occ->dev, |
| "resp timeout status=%02x seq=%d cmd=%d, our seq=%d cmd=%d\n", |
| resp->return_status, resp->seq_no, |
| resp->cmd_type, seq_no, cmd_type); |
| rc = -ETIMEDOUT; |
| goto done; |
| } |
| |
| set_current_state(TASK_UNINTERRUPTIBLE); |
| schedule_timeout(wait_time); |
| } else { |
| /* Extract size of response data */ |
| resp_data_length = |
| get_unaligned_be16(&resp->data_length); |
| |
| /* |
| * Message size is data length + 5 bytes header + 2 |
| * bytes checksum |
| */ |
| if ((resp_data_length + 7) > user_resp_len) { |
| rc = -EMSGSIZE; |
| goto done; |
| } |
| |
| /* |
| * Get the entire response including the header again, |
| * in case it changed |
| */ |
| if (resp_data_length > 1) { |
| rc = occ_getsram(occ, 0, resp, |
| resp_data_length + 7); |
| if (rc) |
| goto done; |
| |
| if (!fsi_occ_response_not_ready(resp, seq_no, |
| cmd_type)) |
| break; |
| } else { |
| break; |
| } |
| } |
| } |
| |
| dev_dbg(dev, "resp_status=%02x resp_data_len=%d\n", |
| resp->return_status, resp_data_length); |
| |
| rc = occ_verify_checksum(occ, resp, resp_data_length); |
| if (rc) |
| goto done; |
| |
| occ->client_response_size = resp_data_length + 7; |
| |
| done: |
| *resp_len = occ->client_response_size; |
| mutex_unlock(&occ->occ_lock); |
| |
| return rc; |
| } |
| EXPORT_SYMBOL_GPL(fsi_occ_submit); |
| |
| static int occ_unregister_platform_child(struct device *dev, void *data) |
| { |
| struct platform_device *hwmon_dev = to_platform_device(dev); |
| |
| platform_device_unregister(hwmon_dev); |
| |
| return 0; |
| } |
| |
| static int occ_unregister_of_child(struct device *dev, void *data) |
| { |
| struct platform_device *hwmon_dev = to_platform_device(dev); |
| |
| of_device_unregister(hwmon_dev); |
| if (dev->of_node) |
| of_node_clear_flag(dev->of_node, OF_POPULATED); |
| |
| return 0; |
| } |
| |
| static int occ_probe(struct platform_device *pdev) |
| { |
| int rc; |
| u32 reg; |
| char child_name[32]; |
| struct occ *occ; |
| struct platform_device *hwmon_dev = NULL; |
| struct device_node *hwmon_node; |
| struct device *dev = &pdev->dev; |
| struct platform_device_info hwmon_dev_info = { |
| .parent = dev, |
| .name = "occ-hwmon", |
| }; |
| |
| occ = devm_kzalloc(dev, sizeof(*occ), GFP_KERNEL); |
| if (!occ) |
| return -ENOMEM; |
| |
| /* SBE words are always four bytes */ |
| occ->buffer = kvmalloc(OCC_MAX_RESP_WORDS * 4, GFP_KERNEL); |
| if (!occ->buffer) |
| return -ENOMEM; |
| |
| occ->version = (uintptr_t)of_device_get_match_data(dev); |
| occ->dev = dev; |
| occ->sbefifo = dev->parent; |
| /* |
| * Quickly derive a pseudo-random number from jiffies so that |
| * re-probing the driver doesn't accidentally overlap sequence numbers. |
| */ |
| occ->sequence_number = (u8)((jiffies % 0xff) + 1); |
| mutex_init(&occ->occ_lock); |
| |
| if (dev->of_node) { |
| rc = of_property_read_u32(dev->of_node, "reg", ®); |
| if (!rc) { |
| /* make sure we don't have a duplicate from dts */ |
| occ->idx = ida_alloc_range(&occ_ida, reg, reg, |
| GFP_KERNEL); |
| if (occ->idx < 0) |
| occ->idx = ida_alloc_min(&occ_ida, 1, |
| GFP_KERNEL); |
| } else { |
| occ->idx = ida_alloc_min(&occ_ida, 1, GFP_KERNEL); |
| } |
| } else { |
| occ->idx = ida_alloc_min(&occ_ida, 1, GFP_KERNEL); |
| } |
| |
| platform_set_drvdata(pdev, occ); |
| |
| snprintf(occ->name, sizeof(occ->name), "occ%d", occ->idx); |
| occ->mdev.fops = &occ_fops; |
| occ->mdev.minor = MISC_DYNAMIC_MINOR; |
| occ->mdev.name = occ->name; |
| occ->mdev.parent = dev; |
| |
| rc = misc_register(&occ->mdev); |
| if (rc) { |
| dev_err(dev, "failed to register miscdevice: %d\n", rc); |
| ida_free(&occ_ida, occ->idx); |
| kvfree(occ->buffer); |
| return rc; |
| } |
| |
| hwmon_node = of_get_child_by_name(dev->of_node, hwmon_dev_info.name); |
| if (hwmon_node) { |
| snprintf(child_name, sizeof(child_name), "%s.%d", hwmon_dev_info.name, occ->idx); |
| hwmon_dev = of_platform_device_create(hwmon_node, child_name, dev); |
| of_node_put(hwmon_node); |
| } |
| |
| if (!hwmon_dev) { |
| occ->platform_hwmon = true; |
| hwmon_dev_info.id = occ->idx; |
| hwmon_dev = platform_device_register_full(&hwmon_dev_info); |
| if (IS_ERR(hwmon_dev)) |
| dev_warn(dev, "failed to create hwmon device\n"); |
| } |
| |
| return 0; |
| } |
| |
| static void occ_remove(struct platform_device *pdev) |
| { |
| struct occ *occ = platform_get_drvdata(pdev); |
| |
| misc_deregister(&occ->mdev); |
| |
| mutex_lock(&occ->occ_lock); |
| kvfree(occ->buffer); |
| occ->buffer = NULL; |
| mutex_unlock(&occ->occ_lock); |
| |
| if (occ->platform_hwmon) |
| device_for_each_child(&pdev->dev, NULL, occ_unregister_platform_child); |
| else |
| device_for_each_child(&pdev->dev, NULL, occ_unregister_of_child); |
| |
| ida_free(&occ_ida, occ->idx); |
| } |
| |
| static const struct of_device_id occ_match[] = { |
| { |
| .compatible = "ibm,p9-occ", |
| .data = (void *)occ_p9 |
| }, |
| { |
| .compatible = "ibm,p10-occ", |
| .data = (void *)occ_p10 |
| }, |
| { }, |
| }; |
| MODULE_DEVICE_TABLE(of, occ_match); |
| |
| static struct platform_driver occ_driver = { |
| .driver = { |
| .name = "occ", |
| .of_match_table = occ_match, |
| }, |
| .probe = occ_probe, |
| .remove_new = occ_remove, |
| }; |
| |
| static int occ_init(void) |
| { |
| return platform_driver_register(&occ_driver); |
| } |
| |
| static void occ_exit(void) |
| { |
| platform_driver_unregister(&occ_driver); |
| |
| ida_destroy(&occ_ida); |
| } |
| |
| module_init(occ_init); |
| module_exit(occ_exit); |
| |
| MODULE_AUTHOR("Eddie James <eajames@linux.ibm.com>"); |
| MODULE_DESCRIPTION("BMC P9 OCC driver"); |
| MODULE_LICENSE("GPL"); |