| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Fujitsu Lifebook Application Panel button drive |
| * |
| * Copyright (C) 2007 Stephen Hemminger <shemminger@linux-foundation.org> |
| * Copyright (C) 2001-2003 Jochen Eisinger <jochen@penguin-breeder.org> |
| * |
| * Many Fujitsu Lifebook laptops have a small panel of buttons that are |
| * accessible via the i2c/smbus interface. This driver polls those |
| * buttons and generates input events. |
| * |
| * For more details see: |
| * http://apanel.sourceforge.net/tech.php |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/module.h> |
| #include <linux/ioport.h> |
| #include <linux/io.h> |
| #include <linux/input.h> |
| #include <linux/i2c.h> |
| #include <linux/leds.h> |
| |
| #define APANEL_NAME "Fujitsu Application Panel" |
| #define APANEL "apanel" |
| |
| /* How often we poll keys - msecs */ |
| #define POLL_INTERVAL_DEFAULT 1000 |
| |
| /* Magic constants in BIOS that tell about buttons */ |
| enum apanel_devid { |
| APANEL_DEV_NONE = 0, |
| APANEL_DEV_APPBTN = 1, |
| APANEL_DEV_CDBTN = 2, |
| APANEL_DEV_LCD = 3, |
| APANEL_DEV_LED = 4, |
| |
| APANEL_DEV_MAX, |
| }; |
| |
| enum apanel_chip { |
| CHIP_NONE = 0, |
| CHIP_OZ992C = 1, |
| CHIP_OZ163T = 2, |
| CHIP_OZ711M3 = 4, |
| }; |
| |
| /* Result of BIOS snooping/probing -- what features are supported */ |
| static enum apanel_chip device_chip[APANEL_DEV_MAX]; |
| |
| #define MAX_PANEL_KEYS 12 |
| |
| struct apanel { |
| struct input_dev *idev; |
| struct i2c_client *client; |
| unsigned short keymap[MAX_PANEL_KEYS]; |
| u16 nkeys; |
| struct led_classdev mail_led; |
| }; |
| |
| static const unsigned short apanel_keymap[MAX_PANEL_KEYS] = { |
| [0] = KEY_MAIL, |
| [1] = KEY_WWW, |
| [2] = KEY_PROG2, |
| [3] = KEY_PROG1, |
| |
| [8] = KEY_FORWARD, |
| [9] = KEY_REWIND, |
| [10] = KEY_STOPCD, |
| [11] = KEY_PLAYPAUSE, |
| }; |
| |
| static void report_key(struct input_dev *input, unsigned keycode) |
| { |
| dev_dbg(input->dev.parent, "report key %#x\n", keycode); |
| input_report_key(input, keycode, 1); |
| input_sync(input); |
| |
| input_report_key(input, keycode, 0); |
| input_sync(input); |
| } |
| |
| /* Poll for key changes |
| * |
| * Read Application keys via SMI |
| * A (0x4), B (0x8), Internet (0x2), Email (0x1). |
| * |
| * CD keys: |
| * Forward (0x100), Rewind (0x200), Stop (0x400), Pause (0x800) |
| */ |
| static void apanel_poll(struct input_dev *idev) |
| { |
| struct apanel *ap = input_get_drvdata(idev); |
| u8 cmd = device_chip[APANEL_DEV_APPBTN] == CHIP_OZ992C ? 0 : 8; |
| s32 data; |
| int i; |
| |
| data = i2c_smbus_read_word_data(ap->client, cmd); |
| if (data < 0) |
| return; /* ignore errors (due to ACPI??) */ |
| |
| /* write back to clear latch */ |
| i2c_smbus_write_word_data(ap->client, cmd, 0); |
| |
| if (!data) |
| return; |
| |
| dev_dbg(&idev->dev, APANEL ": data %#x\n", data); |
| for (i = 0; i < idev->keycodemax; i++) |
| if ((1u << i) & data) |
| report_key(idev, ap->keymap[i]); |
| } |
| |
| static int mail_led_set(struct led_classdev *led, |
| enum led_brightness value) |
| { |
| struct apanel *ap = container_of(led, struct apanel, mail_led); |
| u16 led_bits = value != LED_OFF ? 0x8000 : 0x0000; |
| |
| return i2c_smbus_write_word_data(ap->client, 0x10, led_bits); |
| } |
| |
| static int apanel_probe(struct i2c_client *client) |
| { |
| struct apanel *ap; |
| struct input_dev *idev; |
| u8 cmd = device_chip[APANEL_DEV_APPBTN] == CHIP_OZ992C ? 0 : 8; |
| int i, err; |
| |
| ap = devm_kzalloc(&client->dev, sizeof(*ap), GFP_KERNEL); |
| if (!ap) |
| return -ENOMEM; |
| |
| idev = devm_input_allocate_device(&client->dev); |
| if (!idev) |
| return -ENOMEM; |
| |
| ap->idev = idev; |
| ap->client = client; |
| |
| i2c_set_clientdata(client, ap); |
| |
| err = i2c_smbus_write_word_data(client, cmd, 0); |
| if (err) { |
| dev_warn(&client->dev, "smbus write error %d\n", err); |
| return err; |
| } |
| |
| input_set_drvdata(idev, ap); |
| |
| idev->name = APANEL_NAME " buttons"; |
| idev->phys = "apanel/input0"; |
| idev->id.bustype = BUS_HOST; |
| |
| memcpy(ap->keymap, apanel_keymap, sizeof(apanel_keymap)); |
| idev->keycode = ap->keymap; |
| idev->keycodesize = sizeof(ap->keymap[0]); |
| idev->keycodemax = (device_chip[APANEL_DEV_CDBTN] != CHIP_NONE) ? 12 : 4; |
| |
| set_bit(EV_KEY, idev->evbit); |
| for (i = 0; i < idev->keycodemax; i++) |
| if (ap->keymap[i]) |
| set_bit(ap->keymap[i], idev->keybit); |
| |
| err = input_setup_polling(idev, apanel_poll); |
| if (err) |
| return err; |
| |
| input_set_poll_interval(idev, POLL_INTERVAL_DEFAULT); |
| |
| err = input_register_device(idev); |
| if (err) |
| return err; |
| |
| if (device_chip[APANEL_DEV_LED] != CHIP_NONE) { |
| ap->mail_led.name = "mail:blue"; |
| ap->mail_led.brightness_set_blocking = mail_led_set; |
| err = devm_led_classdev_register(&client->dev, &ap->mail_led); |
| if (err) |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static void apanel_shutdown(struct i2c_client *client) |
| { |
| struct apanel *ap = i2c_get_clientdata(client); |
| |
| if (device_chip[APANEL_DEV_LED] != CHIP_NONE) |
| led_set_brightness(&ap->mail_led, LED_OFF); |
| } |
| |
| static const struct i2c_device_id apanel_id[] = { |
| { "fujitsu_apanel" }, |
| { } |
| }; |
| MODULE_DEVICE_TABLE(i2c, apanel_id); |
| |
| static struct i2c_driver apanel_driver = { |
| .driver = { |
| .name = APANEL, |
| }, |
| .probe = apanel_probe, |
| .shutdown = apanel_shutdown, |
| .id_table = apanel_id, |
| }; |
| |
| /* Scan the system ROM for the signature "FJKEYINF" */ |
| static __init const void __iomem *bios_signature(const void __iomem *bios) |
| { |
| ssize_t offset; |
| const unsigned char signature[] = "FJKEYINF"; |
| |
| for (offset = 0; offset < 0x10000; offset += 0x10) { |
| if (check_signature(bios + offset, signature, |
| sizeof(signature)-1)) |
| return bios + offset; |
| } |
| pr_notice(APANEL ": Fujitsu BIOS signature '%s' not found...\n", |
| signature); |
| return NULL; |
| } |
| |
| static int __init apanel_init(void) |
| { |
| void __iomem *bios; |
| const void __iomem *p; |
| u8 devno; |
| unsigned char i2c_addr; |
| int found = 0; |
| |
| bios = ioremap(0xF0000, 0x10000); /* Can't fail */ |
| |
| p = bios_signature(bios); |
| if (!p) { |
| iounmap(bios); |
| return -ENODEV; |
| } |
| |
| /* just use the first address */ |
| p += 8; |
| i2c_addr = readb(p + 3) >> 1; |
| |
| for ( ; (devno = readb(p)) & 0x7f; p += 4) { |
| unsigned char method, slave, chip; |
| |
| method = readb(p + 1); |
| chip = readb(p + 2); |
| slave = readb(p + 3) >> 1; |
| |
| if (slave != i2c_addr) { |
| pr_notice(APANEL ": only one SMBus slave " |
| "address supported, skipping device...\n"); |
| continue; |
| } |
| |
| /* translate alternative device numbers */ |
| switch (devno) { |
| case 6: |
| devno = APANEL_DEV_APPBTN; |
| break; |
| case 7: |
| devno = APANEL_DEV_LED; |
| break; |
| } |
| |
| if (devno >= APANEL_DEV_MAX) |
| pr_notice(APANEL ": unknown device %u found\n", devno); |
| else if (device_chip[devno] != CHIP_NONE) |
| pr_warn(APANEL ": duplicate entry for devno %u\n", |
| devno); |
| |
| else if (method != 1 && method != 2 && method != 4) { |
| pr_notice(APANEL ": unknown method %u for devno %u\n", |
| method, devno); |
| } else { |
| device_chip[devno] = (enum apanel_chip) chip; |
| ++found; |
| } |
| } |
| iounmap(bios); |
| |
| if (found == 0) { |
| pr_info(APANEL ": no input devices reported by BIOS\n"); |
| return -EIO; |
| } |
| |
| return i2c_add_driver(&apanel_driver); |
| } |
| module_init(apanel_init); |
| |
| static void __exit apanel_cleanup(void) |
| { |
| i2c_del_driver(&apanel_driver); |
| } |
| module_exit(apanel_cleanup); |
| |
| MODULE_AUTHOR("Stephen Hemminger <shemminger@linux-foundation.org>"); |
| MODULE_DESCRIPTION(APANEL_NAME " driver"); |
| MODULE_LICENSE("GPL"); |
| |
| MODULE_ALIAS("dmi:*:svnFUJITSU:pnLifeBook*:pvr*:rvnFUJITSU:*"); |
| MODULE_ALIAS("dmi:*:svnFUJITSU:pnLifebook*:pvr*:rvnFUJITSU:*"); |