| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * LEDs driver for GPIOs |
| * |
| * Copyright (C) 2007 8D Technologies inc. |
| * Raphael Assenat <raph@8d.com> |
| * Copyright (C) 2008 Freescale Semiconductor, Inc. |
| */ |
| #include <linux/container_of.h> |
| #include <linux/device.h> |
| #include <linux/err.h> |
| #include <linux/gpio.h> |
| #include <linux/gpio/consumer.h> |
| #include <linux/leds.h> |
| #include <linux/mod_devicetable.h> |
| #include <linux/module.h> |
| #include <linux/overflow.h> |
| #include <linux/pinctrl/consumer.h> |
| #include <linux/platform_device.h> |
| #include <linux/property.h> |
| #include <linux/slab.h> |
| #include <linux/types.h> |
| |
| #include "leds.h" |
| |
| struct gpio_led_data { |
| struct led_classdev cdev; |
| struct gpio_desc *gpiod; |
| u8 can_sleep; |
| u8 blinking; |
| gpio_blink_set_t platform_gpio_blink_set; |
| }; |
| |
| static inline struct gpio_led_data * |
| cdev_to_gpio_led_data(struct led_classdev *led_cdev) |
| { |
| return container_of(led_cdev, struct gpio_led_data, cdev); |
| } |
| |
| static void gpio_led_set(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| struct gpio_led_data *led_dat = cdev_to_gpio_led_data(led_cdev); |
| int level; |
| |
| if (value == LED_OFF) |
| level = 0; |
| else |
| level = 1; |
| |
| if (led_dat->blinking) { |
| led_dat->platform_gpio_blink_set(led_dat->gpiod, level, |
| NULL, NULL); |
| led_dat->blinking = 0; |
| } else { |
| if (led_dat->can_sleep) |
| gpiod_set_value_cansleep(led_dat->gpiod, level); |
| else |
| gpiod_set_value(led_dat->gpiod, level); |
| } |
| } |
| |
| static int gpio_led_set_blocking(struct led_classdev *led_cdev, |
| enum led_brightness value) |
| { |
| gpio_led_set(led_cdev, value); |
| return 0; |
| } |
| |
| static int gpio_blink_set(struct led_classdev *led_cdev, |
| unsigned long *delay_on, unsigned long *delay_off) |
| { |
| struct gpio_led_data *led_dat = cdev_to_gpio_led_data(led_cdev); |
| |
| led_dat->blinking = 1; |
| return led_dat->platform_gpio_blink_set(led_dat->gpiod, GPIO_LED_BLINK, |
| delay_on, delay_off); |
| } |
| |
| static int create_gpio_led(const struct gpio_led *template, |
| struct gpio_led_data *led_dat, struct device *parent, |
| struct fwnode_handle *fwnode, gpio_blink_set_t blink_set) |
| { |
| struct led_init_data init_data = {}; |
| struct pinctrl *pinctrl; |
| int ret, state; |
| |
| led_dat->cdev.default_trigger = template->default_trigger; |
| led_dat->can_sleep = gpiod_cansleep(led_dat->gpiod); |
| if (!led_dat->can_sleep) |
| led_dat->cdev.brightness_set = gpio_led_set; |
| else |
| led_dat->cdev.brightness_set_blocking = gpio_led_set_blocking; |
| led_dat->blinking = 0; |
| if (blink_set) { |
| led_dat->platform_gpio_blink_set = blink_set; |
| led_dat->cdev.blink_set = gpio_blink_set; |
| } |
| if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP) { |
| state = gpiod_get_value_cansleep(led_dat->gpiod); |
| if (state < 0) |
| return state; |
| } else { |
| state = (template->default_state == LEDS_GPIO_DEFSTATE_ON); |
| } |
| led_dat->cdev.brightness = state; |
| led_dat->cdev.max_brightness = 1; |
| if (!template->retain_state_suspended) |
| led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME; |
| if (template->panic_indicator) |
| led_dat->cdev.flags |= LED_PANIC_INDICATOR; |
| if (template->retain_state_shutdown) |
| led_dat->cdev.flags |= LED_RETAIN_AT_SHUTDOWN; |
| |
| ret = gpiod_direction_output(led_dat->gpiod, state); |
| if (ret < 0) |
| return ret; |
| |
| if (template->name) { |
| led_dat->cdev.name = template->name; |
| ret = devm_led_classdev_register(parent, &led_dat->cdev); |
| } else { |
| init_data.fwnode = fwnode; |
| ret = devm_led_classdev_register_ext(parent, &led_dat->cdev, |
| &init_data); |
| } |
| |
| if (ret) |
| return ret; |
| |
| pinctrl = devm_pinctrl_get_select_default(led_dat->cdev.dev); |
| ret = PTR_ERR_OR_ZERO(pinctrl); |
| /* pinctrl-%d not present, not an error */ |
| if (ret == -ENODEV) |
| ret = 0; |
| if (ret) { |
| dev_warn(led_dat->cdev.dev, "Failed to select %pfw pinctrl: %d\n", |
| fwnode, ret); |
| } |
| |
| return ret; |
| } |
| |
| struct gpio_leds_priv { |
| int num_leds; |
| struct gpio_led_data leds[] __counted_by(num_leds); |
| }; |
| |
| static struct gpio_leds_priv *gpio_leds_create(struct device *dev) |
| { |
| struct fwnode_handle *child; |
| struct gpio_leds_priv *priv; |
| int count, used, ret; |
| |
| count = device_get_child_node_count(dev); |
| if (!count) |
| return ERR_PTR(-ENODEV); |
| |
| priv = devm_kzalloc(dev, struct_size(priv, leds, count), GFP_KERNEL); |
| if (!priv) |
| return ERR_PTR(-ENOMEM); |
| priv->num_leds = count; |
| used = 0; |
| |
| device_for_each_child_node(dev, child) { |
| struct gpio_led_data *led_dat = &priv->leds[used]; |
| struct gpio_led led = {}; |
| |
| /* |
| * Acquire gpiod from DT with uninitialized label, which |
| * will be updated after LED class device is registered, |
| * Only then the final LED name is known. |
| */ |
| led.gpiod = devm_fwnode_gpiod_get(dev, child, NULL, GPIOD_ASIS, |
| NULL); |
| if (IS_ERR(led.gpiod)) { |
| dev_err_probe(dev, PTR_ERR(led.gpiod), "Failed to get GPIO '%pfw'\n", |
| child); |
| fwnode_handle_put(child); |
| return ERR_CAST(led.gpiod); |
| } |
| |
| led_dat->gpiod = led.gpiod; |
| |
| led.default_state = led_init_default_state_get(child); |
| |
| if (fwnode_property_present(child, "retain-state-suspended")) |
| led.retain_state_suspended = 1; |
| if (fwnode_property_present(child, "retain-state-shutdown")) |
| led.retain_state_shutdown = 1; |
| if (fwnode_property_present(child, "panic-indicator")) |
| led.panic_indicator = 1; |
| |
| ret = create_gpio_led(&led, led_dat, dev, child, NULL); |
| if (ret < 0) { |
| fwnode_handle_put(child); |
| return ERR_PTR(ret); |
| } |
| /* Set gpiod label to match the corresponding LED name. */ |
| gpiod_set_consumer_name(led_dat->gpiod, |
| led_dat->cdev.dev->kobj.name); |
| used++; |
| } |
| priv->num_leds = used; |
| |
| return priv; |
| } |
| |
| static const struct of_device_id of_gpio_leds_match[] = { |
| { .compatible = "gpio-leds", }, |
| {}, |
| }; |
| |
| MODULE_DEVICE_TABLE(of, of_gpio_leds_match); |
| |
| static struct gpio_desc *gpio_led_get_gpiod(struct device *dev, int idx, |
| const struct gpio_led *template) |
| { |
| struct gpio_desc *gpiod; |
| unsigned long flags = GPIOF_OUT_INIT_LOW; |
| int ret; |
| |
| /* |
| * This means the LED does not come from the device tree |
| * or ACPI, so let's try just getting it by index from the |
| * device, this will hit the board file, if any and get |
| * the GPIO from there. |
| */ |
| gpiod = devm_gpiod_get_index_optional(dev, NULL, idx, GPIOD_OUT_LOW); |
| if (IS_ERR(gpiod)) |
| return gpiod; |
| if (gpiod) { |
| gpiod_set_consumer_name(gpiod, template->name); |
| return gpiod; |
| } |
| |
| /* |
| * This is the legacy code path for platform code that |
| * still uses GPIO numbers. Ultimately we would like to get |
| * rid of this block completely. |
| */ |
| |
| /* skip leds that aren't available */ |
| if (!gpio_is_valid(template->gpio)) |
| return ERR_PTR(-ENOENT); |
| |
| if (template->active_low) |
| flags |= GPIOF_ACTIVE_LOW; |
| |
| ret = devm_gpio_request_one(dev, template->gpio, flags, |
| template->name); |
| if (ret < 0) |
| return ERR_PTR(ret); |
| |
| gpiod = gpio_to_desc(template->gpio); |
| if (!gpiod) |
| return ERR_PTR(-EINVAL); |
| |
| return gpiod; |
| } |
| |
| static int gpio_led_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct gpio_led_platform_data *pdata = dev_get_platdata(dev); |
| struct gpio_leds_priv *priv; |
| int i, ret; |
| |
| if (pdata && pdata->num_leds) { |
| priv = devm_kzalloc(dev, struct_size(priv, leds, pdata->num_leds), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->num_leds = pdata->num_leds; |
| for (i = 0; i < priv->num_leds; i++) { |
| const struct gpio_led *template = &pdata->leds[i]; |
| struct gpio_led_data *led_dat = &priv->leds[i]; |
| |
| if (template->gpiod) |
| led_dat->gpiod = template->gpiod; |
| else |
| led_dat->gpiod = |
| gpio_led_get_gpiod(dev, i, template); |
| if (IS_ERR(led_dat->gpiod)) { |
| dev_info(dev, "Skipping unavailable LED gpio %d (%s)\n", |
| template->gpio, template->name); |
| continue; |
| } |
| |
| ret = create_gpio_led(template, led_dat, dev, NULL, |
| pdata->gpio_blink_set); |
| if (ret < 0) |
| return ret; |
| } |
| } else { |
| priv = gpio_leds_create(dev); |
| if (IS_ERR(priv)) |
| return PTR_ERR(priv); |
| } |
| |
| platform_set_drvdata(pdev, priv); |
| |
| return 0; |
| } |
| |
| static void gpio_led_shutdown(struct platform_device *pdev) |
| { |
| struct gpio_leds_priv *priv = platform_get_drvdata(pdev); |
| int i; |
| |
| for (i = 0; i < priv->num_leds; i++) { |
| struct gpio_led_data *led = &priv->leds[i]; |
| |
| if (!(led->cdev.flags & LED_RETAIN_AT_SHUTDOWN)) |
| gpio_led_set(&led->cdev, LED_OFF); |
| } |
| } |
| |
| static struct platform_driver gpio_led_driver = { |
| .probe = gpio_led_probe, |
| .shutdown = gpio_led_shutdown, |
| .driver = { |
| .name = "leds-gpio", |
| .of_match_table = of_gpio_leds_match, |
| }, |
| }; |
| |
| module_platform_driver(gpio_led_driver); |
| |
| MODULE_AUTHOR("Raphael Assenat <raph@8d.com>, Trent Piepho <tpiepho@freescale.com>"); |
| MODULE_DESCRIPTION("GPIO LED driver"); |
| MODULE_LICENSE("GPL"); |
| MODULE_ALIAS("platform:leds-gpio"); |