| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2014 Belkin Inc. |
| * Copyright 2015 Andrew Lunn <andrew@lunn.ch> |
| */ |
| |
| #include <linux/i2c.h> |
| #include <linux/leds.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/regmap.h> |
| #include <linux/slab.h> |
| |
| #define TLC591XX_MAX_LEDS 16 |
| #define TLC591XX_MAX_BRIGHTNESS 256 |
| |
| #define TLC591XX_REG_MODE1 0x00 |
| #define MODE1_RESPON_ADDR_MASK 0xF0 |
| #define MODE1_NORMAL_MODE (0 << 4) |
| #define MODE1_SPEED_MODE (1 << 4) |
| |
| #define TLC591XX_REG_MODE2 0x01 |
| #define MODE2_DIM (0 << 5) |
| #define MODE2_BLINK (1 << 5) |
| #define MODE2_OCH_STOP (0 << 3) |
| #define MODE2_OCH_ACK (1 << 3) |
| |
| #define TLC591XX_REG_PWM(x) (0x02 + (x)) |
| |
| #define TLC591XX_REG_GRPPWM 0x12 |
| #define TLC591XX_REG_GRPFREQ 0x13 |
| |
| /* LED Driver Output State, determine the source that drives LED outputs */ |
| #define LEDOUT_OFF 0x0 /* Output LOW */ |
| #define LEDOUT_ON 0x1 /* Output HI-Z */ |
| #define LEDOUT_DIM 0x2 /* Dimming */ |
| #define LEDOUT_BLINK 0x3 /* Blinking */ |
| #define LEDOUT_MASK 0x3 |
| |
| #define ldev_to_led(c) container_of(c, struct tlc591xx_led, ldev) |
| |
| struct tlc591xx_led { |
| bool active; |
| unsigned int led_no; |
| struct led_classdev ldev; |
| struct tlc591xx_priv *priv; |
| }; |
| |
| struct tlc591xx_priv { |
| struct tlc591xx_led leds[TLC591XX_MAX_LEDS]; |
| struct regmap *regmap; |
| unsigned int reg_ledout_offset; |
| }; |
| |
| struct tlc591xx { |
| unsigned int max_leds; |
| unsigned int reg_ledout_offset; |
| }; |
| |
| static const struct tlc591xx tlc59116 = { |
| .max_leds = 16, |
| .reg_ledout_offset = 0x14, |
| }; |
| |
| static const struct tlc591xx tlc59108 = { |
| .max_leds = 8, |
| .reg_ledout_offset = 0x0c, |
| }; |
| |
| static int |
| tlc591xx_set_mode(struct regmap *regmap, u8 mode) |
| { |
| int err; |
| u8 val; |
| |
| err = regmap_write(regmap, TLC591XX_REG_MODE1, MODE1_NORMAL_MODE); |
| if (err) |
| return err; |
| |
| val = MODE2_OCH_STOP | mode; |
| |
| return regmap_write(regmap, TLC591XX_REG_MODE2, val); |
| } |
| |
| static int |
| tlc591xx_set_ledout(struct tlc591xx_priv *priv, struct tlc591xx_led *led, |
| u8 val) |
| { |
| unsigned int i = (led->led_no % 4) * 2; |
| unsigned int mask = LEDOUT_MASK << i; |
| unsigned int addr = priv->reg_ledout_offset + (led->led_no >> 2); |
| |
| val = val << i; |
| |
| return regmap_update_bits(priv->regmap, addr, mask, val); |
| } |
| |
| static int |
| tlc591xx_set_pwm(struct tlc591xx_priv *priv, struct tlc591xx_led *led, |
| u8 brightness) |
| { |
| u8 pwm = TLC591XX_REG_PWM(led->led_no); |
| |
| return regmap_write(priv->regmap, pwm, brightness); |
| } |
| |
| static int |
| tlc591xx_brightness_set(struct led_classdev *led_cdev, |
| enum led_brightness brightness) |
| { |
| struct tlc591xx_led *led = ldev_to_led(led_cdev); |
| struct tlc591xx_priv *priv = led->priv; |
| int err; |
| |
| switch ((int)brightness) { |
| case 0: |
| err = tlc591xx_set_ledout(priv, led, LEDOUT_OFF); |
| break; |
| case TLC591XX_MAX_BRIGHTNESS: |
| err = tlc591xx_set_ledout(priv, led, LEDOUT_ON); |
| break; |
| default: |
| err = tlc591xx_set_ledout(priv, led, LEDOUT_DIM); |
| if (!err) |
| err = tlc591xx_set_pwm(priv, led, brightness); |
| } |
| |
| return err; |
| } |
| |
| static const struct regmap_config tlc591xx_regmap = { |
| .reg_bits = 8, |
| .val_bits = 8, |
| .max_register = 0x1e, |
| }; |
| |
| static const struct of_device_id of_tlc591xx_leds_match[] __maybe_unused = { |
| { .compatible = "ti,tlc59116", |
| .data = &tlc59116 }, |
| { .compatible = "ti,tlc59108", |
| .data = &tlc59108 }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, of_tlc591xx_leds_match); |
| |
| static int |
| tlc591xx_probe(struct i2c_client *client) |
| { |
| struct device_node *np; |
| struct device *dev = &client->dev; |
| const struct tlc591xx *tlc591xx; |
| struct tlc591xx_priv *priv; |
| int err, count, reg; |
| |
| np = dev_of_node(dev); |
| if (!np) |
| return -ENODEV; |
| |
| tlc591xx = device_get_match_data(dev); |
| if (!tlc591xx) |
| return -ENODEV; |
| |
| count = of_get_available_child_count(np); |
| if (!count || count > tlc591xx->max_leds) |
| return -EINVAL; |
| |
| priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); |
| if (!priv) |
| return -ENOMEM; |
| |
| priv->regmap = devm_regmap_init_i2c(client, &tlc591xx_regmap); |
| if (IS_ERR(priv->regmap)) { |
| err = PTR_ERR(priv->regmap); |
| dev_err(dev, "Failed to allocate register map: %d\n", err); |
| return err; |
| } |
| priv->reg_ledout_offset = tlc591xx->reg_ledout_offset; |
| |
| i2c_set_clientdata(client, priv); |
| |
| err = tlc591xx_set_mode(priv->regmap, MODE2_DIM); |
| if (err < 0) |
| return err; |
| |
| for_each_available_child_of_node_scoped(np, child) { |
| struct tlc591xx_led *led; |
| struct led_init_data init_data = {}; |
| |
| init_data.fwnode = of_fwnode_handle(child); |
| |
| err = of_property_read_u32(child, "reg", ®); |
| if (err) |
| return err; |
| |
| if (reg < 0 || reg >= tlc591xx->max_leds || |
| priv->leds[reg].active) |
| return -EINVAL; |
| |
| led = &priv->leds[reg]; |
| |
| led->active = true; |
| led->priv = priv; |
| led->led_no = reg; |
| led->ldev.brightness_set_blocking = tlc591xx_brightness_set; |
| led->ldev.max_brightness = TLC591XX_MAX_BRIGHTNESS; |
| err = devm_led_classdev_register_ext(dev, &led->ldev, |
| &init_data); |
| if (err < 0) |
| return dev_err_probe(dev, err, |
| "couldn't register LED %s\n", |
| led->ldev.name); |
| } |
| return 0; |
| } |
| |
| static const struct i2c_device_id tlc591xx_id[] = { |
| { "tlc59116" }, |
| { "tlc59108" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(i2c, tlc591xx_id); |
| |
| static struct i2c_driver tlc591xx_driver = { |
| .driver = { |
| .name = "tlc591xx", |
| .of_match_table = of_match_ptr(of_tlc591xx_leds_match), |
| }, |
| .probe = tlc591xx_probe, |
| .id_table = tlc591xx_id, |
| }; |
| |
| module_i2c_driver(tlc591xx_driver); |
| |
| MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>"); |
| MODULE_LICENSE("GPL"); |
| MODULE_DESCRIPTION("TLC591XX LED driver"); |