| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) STMicroelectronics 2018 - All Rights Reserved |
| * Authors: Ludovic Barre <ludovic.barre@st.com> for STMicroelectronics. |
| * Fabien Dessenne <fabien.dessenne@st.com> for STMicroelectronics. |
| */ |
| |
| #include <linux/arm-smccc.h> |
| #include <linux/dma-mapping.h> |
| #include <linux/interrupt.h> |
| #include <linux/io.h> |
| #include <linux/mailbox_client.h> |
| #include <linux/mfd/syscon.h> |
| #include <linux/module.h> |
| #include <linux/of.h> |
| #include <linux/of_reserved_mem.h> |
| #include <linux/platform_device.h> |
| #include <linux/pm_wakeirq.h> |
| #include <linux/regmap.h> |
| #include <linux/remoteproc.h> |
| #include <linux/reset.h> |
| #include <linux/slab.h> |
| #include <linux/workqueue.h> |
| |
| #include "remoteproc_internal.h" |
| |
| #define HOLD_BOOT 0 |
| #define RELEASE_BOOT 1 |
| |
| #define MBOX_NB_VQ 2 |
| #define MBOX_NB_MBX 4 |
| |
| #define STM32_SMC_RCC 0x82001000 |
| #define STM32_SMC_REG_WRITE 0x1 |
| |
| #define STM32_MBX_VQ0 "vq0" |
| #define STM32_MBX_VQ0_ID 0 |
| #define STM32_MBX_VQ1 "vq1" |
| #define STM32_MBX_VQ1_ID 1 |
| #define STM32_MBX_SHUTDOWN "shutdown" |
| #define STM32_MBX_DETACH "detach" |
| |
| #define RSC_TBL_SIZE 1024 |
| |
| #define M4_STATE_OFF 0 |
| #define M4_STATE_INI 1 |
| #define M4_STATE_CRUN 2 |
| #define M4_STATE_CSTOP 3 |
| #define M4_STATE_STANDBY 4 |
| #define M4_STATE_CRASH 5 |
| |
| struct stm32_syscon { |
| struct regmap *map; |
| u32 reg; |
| u32 mask; |
| }; |
| |
| struct stm32_rproc_mem { |
| char name[20]; |
| void __iomem *cpu_addr; |
| phys_addr_t bus_addr; |
| u32 dev_addr; |
| size_t size; |
| }; |
| |
| struct stm32_rproc_mem_ranges { |
| u32 dev_addr; |
| u32 bus_addr; |
| u32 size; |
| }; |
| |
| struct stm32_mbox { |
| const unsigned char name[10]; |
| struct mbox_chan *chan; |
| struct mbox_client client; |
| struct work_struct vq_work; |
| int vq_id; |
| }; |
| |
| struct stm32_rproc { |
| struct reset_control *rst; |
| struct reset_control *hold_boot_rst; |
| struct stm32_syscon hold_boot; |
| struct stm32_syscon pdds; |
| struct stm32_syscon m4_state; |
| struct stm32_syscon rsctbl; |
| int wdg_irq; |
| u32 nb_rmems; |
| struct stm32_rproc_mem *rmems; |
| struct stm32_mbox mb[MBOX_NB_MBX]; |
| struct workqueue_struct *workqueue; |
| bool hold_boot_smc; |
| void __iomem *rsc_va; |
| }; |
| |
| static int stm32_rproc_pa_to_da(struct rproc *rproc, phys_addr_t pa, u64 *da) |
| { |
| unsigned int i; |
| struct stm32_rproc *ddata = rproc->priv; |
| struct stm32_rproc_mem *p_mem; |
| |
| for (i = 0; i < ddata->nb_rmems; i++) { |
| p_mem = &ddata->rmems[i]; |
| |
| if (pa < p_mem->bus_addr || |
| pa >= p_mem->bus_addr + p_mem->size) |
| continue; |
| *da = pa - p_mem->bus_addr + p_mem->dev_addr; |
| dev_dbg(rproc->dev.parent, "pa %pa to da %llx\n", &pa, *da); |
| return 0; |
| } |
| |
| return -EINVAL; |
| } |
| |
| static int stm32_rproc_mem_alloc(struct rproc *rproc, |
| struct rproc_mem_entry *mem) |
| { |
| struct device *dev = rproc->dev.parent; |
| void *va; |
| |
| dev_dbg(dev, "map memory: %pad+%zx\n", &mem->dma, mem->len); |
| va = (__force void *)ioremap_wc(mem->dma, mem->len); |
| if (IS_ERR_OR_NULL(va)) { |
| dev_err(dev, "Unable to map memory region: %pad+0x%zx\n", |
| &mem->dma, mem->len); |
| return -ENOMEM; |
| } |
| |
| /* Update memory entry va */ |
| mem->va = va; |
| |
| return 0; |
| } |
| |
| static int stm32_rproc_mem_release(struct rproc *rproc, |
| struct rproc_mem_entry *mem) |
| { |
| dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma); |
| iounmap((__force __iomem void *)mem->va); |
| |
| return 0; |
| } |
| |
| static int stm32_rproc_of_memory_translations(struct platform_device *pdev, |
| struct stm32_rproc *ddata) |
| { |
| struct device *parent, *dev = &pdev->dev; |
| struct device_node *np; |
| struct stm32_rproc_mem *p_mems; |
| struct stm32_rproc_mem_ranges *mem_range; |
| int cnt, array_size, i, ret = 0; |
| |
| parent = dev->parent; |
| np = parent->of_node; |
| |
| cnt = of_property_count_elems_of_size(np, "dma-ranges", |
| sizeof(*mem_range)); |
| if (cnt <= 0) { |
| dev_err(dev, "%s: dma-ranges property not defined\n", __func__); |
| return -EINVAL; |
| } |
| |
| p_mems = devm_kcalloc(dev, cnt, sizeof(*p_mems), GFP_KERNEL); |
| if (!p_mems) |
| return -ENOMEM; |
| mem_range = kcalloc(cnt, sizeof(*mem_range), GFP_KERNEL); |
| if (!mem_range) |
| return -ENOMEM; |
| |
| array_size = cnt * sizeof(struct stm32_rproc_mem_ranges) / sizeof(u32); |
| |
| ret = of_property_read_u32_array(np, "dma-ranges", |
| (u32 *)mem_range, array_size); |
| if (ret) { |
| dev_err(dev, "error while get dma-ranges property: %x\n", ret); |
| goto free_mem; |
| } |
| |
| for (i = 0; i < cnt; i++) { |
| p_mems[i].bus_addr = mem_range[i].bus_addr; |
| p_mems[i].dev_addr = mem_range[i].dev_addr; |
| p_mems[i].size = mem_range[i].size; |
| |
| dev_dbg(dev, "memory range[%i]: da %#x, pa %pa, size %#zx:\n", |
| i, p_mems[i].dev_addr, &p_mems[i].bus_addr, |
| p_mems[i].size); |
| } |
| |
| ddata->rmems = p_mems; |
| ddata->nb_rmems = cnt; |
| |
| free_mem: |
| kfree(mem_range); |
| return ret; |
| } |
| |
| static int stm32_rproc_mbox_idx(struct rproc *rproc, const unsigned char *name) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ddata->mb); i++) { |
| if (!strncmp(ddata->mb[i].name, name, strlen(name))) |
| return i; |
| } |
| dev_err(&rproc->dev, "mailbox %s not found\n", name); |
| |
| return -EINVAL; |
| } |
| |
| static int stm32_rproc_prepare(struct rproc *rproc) |
| { |
| struct device *dev = rproc->dev.parent; |
| struct device_node *np = dev->of_node; |
| struct of_phandle_iterator it; |
| struct rproc_mem_entry *mem; |
| struct reserved_mem *rmem; |
| u64 da; |
| int index = 0; |
| |
| /* Register associated reserved memory regions */ |
| of_phandle_iterator_init(&it, np, "memory-region", NULL, 0); |
| while (of_phandle_iterator_next(&it) == 0) { |
| rmem = of_reserved_mem_lookup(it.node); |
| if (!rmem) { |
| of_node_put(it.node); |
| dev_err(dev, "unable to acquire memory-region\n"); |
| return -EINVAL; |
| } |
| |
| if (stm32_rproc_pa_to_da(rproc, rmem->base, &da) < 0) { |
| of_node_put(it.node); |
| dev_err(dev, "memory region not valid %pa\n", |
| &rmem->base); |
| return -EINVAL; |
| } |
| |
| /* No need to map vdev buffer */ |
| if (strcmp(it.node->name, "vdev0buffer")) { |
| /* Register memory region */ |
| mem = rproc_mem_entry_init(dev, NULL, |
| (dma_addr_t)rmem->base, |
| rmem->size, da, |
| stm32_rproc_mem_alloc, |
| stm32_rproc_mem_release, |
| it.node->name); |
| |
| if (mem) |
| rproc_coredump_add_segment(rproc, da, |
| rmem->size); |
| } else { |
| /* Register reserved memory for vdev buffer alloc */ |
| mem = rproc_of_resm_mem_entry_init(dev, index, |
| rmem->size, |
| rmem->base, |
| it.node->name); |
| } |
| |
| if (!mem) { |
| of_node_put(it.node); |
| return -ENOMEM; |
| } |
| |
| rproc_add_carveout(rproc, mem); |
| index++; |
| } |
| |
| return 0; |
| } |
| |
| static int stm32_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw) |
| { |
| if (rproc_elf_load_rsc_table(rproc, fw)) |
| dev_warn(&rproc->dev, "no resource table found for this firmware\n"); |
| |
| return 0; |
| } |
| |
| static irqreturn_t stm32_rproc_wdg(int irq, void *data) |
| { |
| struct platform_device *pdev = data; |
| struct rproc *rproc = platform_get_drvdata(pdev); |
| |
| rproc_report_crash(rproc, RPROC_WATCHDOG); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static void stm32_rproc_mb_vq_work(struct work_struct *work) |
| { |
| struct stm32_mbox *mb = container_of(work, struct stm32_mbox, vq_work); |
| struct rproc *rproc = dev_get_drvdata(mb->client.dev); |
| |
| mutex_lock(&rproc->lock); |
| |
| if (rproc->state != RPROC_RUNNING && rproc->state != RPROC_ATTACHED) |
| goto unlock_mutex; |
| |
| if (rproc_vq_interrupt(rproc, mb->vq_id) == IRQ_NONE) |
| dev_dbg(&rproc->dev, "no message found in vq%d\n", mb->vq_id); |
| |
| unlock_mutex: |
| mutex_unlock(&rproc->lock); |
| } |
| |
| static void stm32_rproc_mb_callback(struct mbox_client *cl, void *data) |
| { |
| struct rproc *rproc = dev_get_drvdata(cl->dev); |
| struct stm32_mbox *mb = container_of(cl, struct stm32_mbox, client); |
| struct stm32_rproc *ddata = rproc->priv; |
| |
| queue_work(ddata->workqueue, &mb->vq_work); |
| } |
| |
| static void stm32_rproc_free_mbox(struct rproc *rproc) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| unsigned int i; |
| |
| for (i = 0; i < ARRAY_SIZE(ddata->mb); i++) { |
| if (ddata->mb[i].chan) |
| mbox_free_channel(ddata->mb[i].chan); |
| ddata->mb[i].chan = NULL; |
| } |
| } |
| |
| static const struct stm32_mbox stm32_rproc_mbox[MBOX_NB_MBX] = { |
| { |
| .name = STM32_MBX_VQ0, |
| .vq_id = STM32_MBX_VQ0_ID, |
| .client = { |
| .rx_callback = stm32_rproc_mb_callback, |
| .tx_block = false, |
| }, |
| }, |
| { |
| .name = STM32_MBX_VQ1, |
| .vq_id = STM32_MBX_VQ1_ID, |
| .client = { |
| .rx_callback = stm32_rproc_mb_callback, |
| .tx_block = false, |
| }, |
| }, |
| { |
| .name = STM32_MBX_SHUTDOWN, |
| .vq_id = -1, |
| .client = { |
| .tx_block = true, |
| .tx_done = NULL, |
| .tx_tout = 500, /* 500 ms time out */ |
| }, |
| }, |
| { |
| .name = STM32_MBX_DETACH, |
| .vq_id = -1, |
| .client = { |
| .tx_block = true, |
| .tx_done = NULL, |
| .tx_tout = 200, /* 200 ms time out to detach should be fair enough */ |
| }, |
| } |
| }; |
| |
| static int stm32_rproc_request_mbox(struct rproc *rproc) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| struct device *dev = &rproc->dev; |
| unsigned int i; |
| int j; |
| const unsigned char *name; |
| struct mbox_client *cl; |
| |
| /* Initialise mailbox structure table */ |
| memcpy(ddata->mb, stm32_rproc_mbox, sizeof(stm32_rproc_mbox)); |
| |
| for (i = 0; i < MBOX_NB_MBX; i++) { |
| name = ddata->mb[i].name; |
| |
| cl = &ddata->mb[i].client; |
| cl->dev = dev->parent; |
| |
| ddata->mb[i].chan = mbox_request_channel_byname(cl, name); |
| if (IS_ERR(ddata->mb[i].chan)) { |
| if (PTR_ERR(ddata->mb[i].chan) == -EPROBE_DEFER) { |
| dev_err_probe(dev->parent, |
| PTR_ERR(ddata->mb[i].chan), |
| "failed to request mailbox %s\n", |
| name); |
| goto err_probe; |
| } |
| dev_warn(dev, "cannot get %s mbox\n", name); |
| ddata->mb[i].chan = NULL; |
| } |
| if (ddata->mb[i].vq_id >= 0) { |
| INIT_WORK(&ddata->mb[i].vq_work, |
| stm32_rproc_mb_vq_work); |
| } |
| } |
| |
| return 0; |
| |
| err_probe: |
| for (j = i - 1; j >= 0; j--) |
| if (ddata->mb[j].chan) |
| mbox_free_channel(ddata->mb[j].chan); |
| return -EPROBE_DEFER; |
| } |
| |
| static int stm32_rproc_set_hold_boot(struct rproc *rproc, bool hold) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| struct stm32_syscon hold_boot = ddata->hold_boot; |
| struct arm_smccc_res smc_res; |
| int val, err; |
| |
| /* |
| * Three ways to manage the hold boot |
| * - using SCMI: the hold boot is managed as a reset, |
| * - using Linux(no SCMI): the hold boot is managed as a syscon register |
| * - using SMC call (deprecated): use SMC reset interface |
| */ |
| |
| val = hold ? HOLD_BOOT : RELEASE_BOOT; |
| |
| if (ddata->hold_boot_rst) { |
| /* Use the SCMI reset controller */ |
| if (!hold) |
| err = reset_control_deassert(ddata->hold_boot_rst); |
| else |
| err = reset_control_assert(ddata->hold_boot_rst); |
| } else if (IS_ENABLED(CONFIG_HAVE_ARM_SMCCC) && ddata->hold_boot_smc) { |
| /* Use the SMC call */ |
| arm_smccc_smc(STM32_SMC_RCC, STM32_SMC_REG_WRITE, |
| hold_boot.reg, val, 0, 0, 0, 0, &smc_res); |
| err = smc_res.a0; |
| } else { |
| /* Use syscon */ |
| err = regmap_update_bits(hold_boot.map, hold_boot.reg, |
| hold_boot.mask, val); |
| } |
| |
| if (err) |
| dev_err(&rproc->dev, "failed to set hold boot\n"); |
| |
| return err; |
| } |
| |
| static void stm32_rproc_add_coredump_trace(struct rproc *rproc) |
| { |
| struct rproc_debug_trace *trace; |
| struct rproc_dump_segment *segment; |
| bool already_added; |
| |
| list_for_each_entry(trace, &rproc->traces, node) { |
| already_added = false; |
| |
| list_for_each_entry(segment, &rproc->dump_segments, node) { |
| if (segment->da == trace->trace_mem.da) { |
| already_added = true; |
| break; |
| } |
| } |
| |
| if (!already_added) |
| rproc_coredump_add_segment(rproc, trace->trace_mem.da, |
| trace->trace_mem.len); |
| } |
| } |
| |
| static int stm32_rproc_start(struct rproc *rproc) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| int err; |
| |
| stm32_rproc_add_coredump_trace(rproc); |
| |
| /* clear remote proc Deep Sleep */ |
| if (ddata->pdds.map) { |
| err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg, |
| ddata->pdds.mask, 0); |
| if (err) { |
| dev_err(&rproc->dev, "failed to clear pdds\n"); |
| return err; |
| } |
| } |
| |
| err = stm32_rproc_set_hold_boot(rproc, false); |
| if (err) |
| return err; |
| |
| return stm32_rproc_set_hold_boot(rproc, true); |
| } |
| |
| static int stm32_rproc_attach(struct rproc *rproc) |
| { |
| stm32_rproc_add_coredump_trace(rproc); |
| |
| return stm32_rproc_set_hold_boot(rproc, true); |
| } |
| |
| static int stm32_rproc_detach(struct rproc *rproc) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| int err, idx; |
| |
| /* Inform the remote processor of the detach */ |
| idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_DETACH); |
| if (idx >= 0 && ddata->mb[idx].chan) { |
| err = mbox_send_message(ddata->mb[idx].chan, "stop"); |
| if (err < 0) |
| dev_warn(&rproc->dev, "warning: remote FW detach without ack\n"); |
| } |
| |
| /* Allow remote processor to auto-reboot */ |
| return stm32_rproc_set_hold_boot(rproc, false); |
| } |
| |
| static int stm32_rproc_stop(struct rproc *rproc) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| int err, idx; |
| |
| /* request shutdown of the remote processor */ |
| if (rproc->state != RPROC_OFFLINE && rproc->state != RPROC_CRASHED) { |
| idx = stm32_rproc_mbox_idx(rproc, STM32_MBX_SHUTDOWN); |
| if (idx >= 0 && ddata->mb[idx].chan) { |
| err = mbox_send_message(ddata->mb[idx].chan, "detach"); |
| if (err < 0) |
| dev_warn(&rproc->dev, "warning: remote FW shutdown without ack\n"); |
| } |
| } |
| |
| err = stm32_rproc_set_hold_boot(rproc, true); |
| if (err) |
| return err; |
| |
| err = reset_control_assert(ddata->rst); |
| if (err) { |
| dev_err(&rproc->dev, "failed to assert the reset\n"); |
| return err; |
| } |
| |
| /* to allow platform Standby power mode, set remote proc Deep Sleep */ |
| if (ddata->pdds.map) { |
| err = regmap_update_bits(ddata->pdds.map, ddata->pdds.reg, |
| ddata->pdds.mask, 1); |
| if (err) { |
| dev_err(&rproc->dev, "failed to set pdds\n"); |
| return err; |
| } |
| } |
| |
| /* update coprocessor state to OFF if available */ |
| if (ddata->m4_state.map) { |
| err = regmap_update_bits(ddata->m4_state.map, |
| ddata->m4_state.reg, |
| ddata->m4_state.mask, |
| M4_STATE_OFF); |
| if (err) { |
| dev_err(&rproc->dev, "failed to set copro state\n"); |
| return err; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static void stm32_rproc_kick(struct rproc *rproc, int vqid) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| unsigned int i; |
| int err; |
| |
| if (WARN_ON(vqid >= MBOX_NB_VQ)) |
| return; |
| |
| for (i = 0; i < MBOX_NB_MBX; i++) { |
| if (vqid != ddata->mb[i].vq_id) |
| continue; |
| if (!ddata->mb[i].chan) |
| return; |
| err = mbox_send_message(ddata->mb[i].chan, "kick"); |
| if (err < 0) |
| dev_err(&rproc->dev, "%s: failed (%s, err:%d)\n", |
| __func__, ddata->mb[i].name, err); |
| return; |
| } |
| } |
| |
| static int stm32_rproc_da_to_pa(struct rproc *rproc, |
| u64 da, phys_addr_t *pa) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| struct device *dev = rproc->dev.parent; |
| struct stm32_rproc_mem *p_mem; |
| unsigned int i; |
| |
| for (i = 0; i < ddata->nb_rmems; i++) { |
| p_mem = &ddata->rmems[i]; |
| |
| if (da < p_mem->dev_addr || |
| da >= p_mem->dev_addr + p_mem->size) |
| continue; |
| |
| *pa = da - p_mem->dev_addr + p_mem->bus_addr; |
| dev_dbg(dev, "da %llx to pa %pap\n", da, pa); |
| |
| return 0; |
| } |
| |
| dev_err(dev, "can't translate da %llx\n", da); |
| |
| return -EINVAL; |
| } |
| |
| static struct resource_table * |
| stm32_rproc_get_loaded_rsc_table(struct rproc *rproc, size_t *table_sz) |
| { |
| struct stm32_rproc *ddata = rproc->priv; |
| struct device *dev = rproc->dev.parent; |
| phys_addr_t rsc_pa; |
| u32 rsc_da; |
| int err; |
| |
| /* The resource table has already been mapped, nothing to do */ |
| if (ddata->rsc_va) |
| goto done; |
| |
| err = regmap_read(ddata->rsctbl.map, ddata->rsctbl.reg, &rsc_da); |
| if (err) { |
| dev_err(dev, "failed to read rsc tbl addr\n"); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| if (!rsc_da) |
| /* no rsc table */ |
| return ERR_PTR(-ENOENT); |
| |
| err = stm32_rproc_da_to_pa(rproc, rsc_da, &rsc_pa); |
| if (err) |
| return ERR_PTR(err); |
| |
| ddata->rsc_va = devm_ioremap_wc(dev, rsc_pa, RSC_TBL_SIZE); |
| if (IS_ERR_OR_NULL(ddata->rsc_va)) { |
| dev_err(dev, "Unable to map memory region: %pa+%x\n", |
| &rsc_pa, RSC_TBL_SIZE); |
| ddata->rsc_va = NULL; |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| done: |
| /* |
| * Assuming the resource table fits in 1kB is fair. |
| * Notice for the detach, that this 1 kB memory area has to be reserved in the coprocessor |
| * firmware for the resource table. On detach, the remoteproc core re-initializes this |
| * entire area by overwriting it with the initial values stored in rproc->clean_table. |
| */ |
| *table_sz = RSC_TBL_SIZE; |
| return (__force struct resource_table *)ddata->rsc_va; |
| } |
| |
| static const struct rproc_ops st_rproc_ops = { |
| .prepare = stm32_rproc_prepare, |
| .start = stm32_rproc_start, |
| .stop = stm32_rproc_stop, |
| .attach = stm32_rproc_attach, |
| .detach = stm32_rproc_detach, |
| .kick = stm32_rproc_kick, |
| .load = rproc_elf_load_segments, |
| .parse_fw = stm32_rproc_parse_fw, |
| .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table, |
| .get_loaded_rsc_table = stm32_rproc_get_loaded_rsc_table, |
| .sanity_check = rproc_elf_sanity_check, |
| .get_boot_addr = rproc_elf_get_boot_addr, |
| }; |
| |
| static const struct of_device_id stm32_rproc_match[] = { |
| { .compatible = "st,stm32mp1-m4" }, |
| {}, |
| }; |
| MODULE_DEVICE_TABLE(of, stm32_rproc_match); |
| |
| static int stm32_rproc_get_syscon(struct device_node *np, const char *prop, |
| struct stm32_syscon *syscon) |
| { |
| int err = 0; |
| |
| syscon->map = syscon_regmap_lookup_by_phandle(np, prop); |
| if (IS_ERR(syscon->map)) { |
| err = PTR_ERR(syscon->map); |
| syscon->map = NULL; |
| goto out; |
| } |
| |
| err = of_property_read_u32_index(np, prop, 1, &syscon->reg); |
| if (err) |
| goto out; |
| |
| err = of_property_read_u32_index(np, prop, 2, &syscon->mask); |
| |
| out: |
| return err; |
| } |
| |
| static int stm32_rproc_parse_dt(struct platform_device *pdev, |
| struct stm32_rproc *ddata, bool *auto_boot) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct stm32_syscon tz; |
| unsigned int tzen; |
| int err, irq; |
| |
| irq = platform_get_irq_optional(pdev, 0); |
| if (irq == -EPROBE_DEFER) |
| return irq; |
| |
| if (irq > 0) { |
| err = devm_request_irq(dev, irq, stm32_rproc_wdg, 0, |
| dev_name(dev), pdev); |
| if (err) |
| return dev_err_probe(dev, err, |
| "failed to request wdg irq\n"); |
| |
| ddata->wdg_irq = irq; |
| |
| if (of_property_read_bool(np, "wakeup-source")) { |
| device_init_wakeup(dev, true); |
| dev_pm_set_wake_irq(dev, irq); |
| } |
| |
| dev_info(dev, "wdg irq registered\n"); |
| } |
| |
| ddata->rst = devm_reset_control_get_optional(dev, "mcu_rst"); |
| if (!ddata->rst) { |
| /* Try legacy fallback method: get it by index */ |
| ddata->rst = devm_reset_control_get_by_index(dev, 0); |
| } |
| if (IS_ERR(ddata->rst)) |
| return dev_err_probe(dev, PTR_ERR(ddata->rst), |
| "failed to get mcu_reset\n"); |
| |
| /* |
| * Three ways to manage the hold boot |
| * - using SCMI: the hold boot is managed as a reset |
| * The DT "reset-mames" property should be defined with 2 items: |
| * reset-names = "mcu_rst", "hold_boot"; |
| * - using SMC call (deprecated): use SMC reset interface |
| * The DT "reset-mames" property is optional, "st,syscfg-tz" is required |
| * - default(no SCMI, no SMC): the hold boot is managed as a syscon register |
| * The DT "reset-mames" property is optional, "st,syscfg-holdboot" is required |
| */ |
| |
| ddata->hold_boot_rst = devm_reset_control_get_optional(dev, "hold_boot"); |
| if (IS_ERR(ddata->hold_boot_rst)) |
| return dev_err_probe(dev, PTR_ERR(ddata->hold_boot_rst), |
| "failed to get hold_boot reset\n"); |
| |
| if (!ddata->hold_boot_rst && IS_ENABLED(CONFIG_HAVE_ARM_SMCCC)) { |
| /* Manage the MCU_BOOT using SMC call */ |
| err = stm32_rproc_get_syscon(np, "st,syscfg-tz", &tz); |
| if (!err) { |
| err = regmap_read(tz.map, tz.reg, &tzen); |
| if (err) { |
| dev_err(dev, "failed to read tzen\n"); |
| return err; |
| } |
| ddata->hold_boot_smc = tzen & tz.mask; |
| } |
| } |
| |
| if (!ddata->hold_boot_rst && !ddata->hold_boot_smc) { |
| /* Default: hold boot manage it through the syscon controller */ |
| err = stm32_rproc_get_syscon(np, "st,syscfg-holdboot", |
| &ddata->hold_boot); |
| if (err) { |
| dev_err(dev, "failed to get hold boot\n"); |
| return err; |
| } |
| } |
| |
| err = stm32_rproc_get_syscon(np, "st,syscfg-pdds", &ddata->pdds); |
| if (err) |
| dev_info(dev, "failed to get pdds\n"); |
| |
| *auto_boot = of_property_read_bool(np, "st,auto-boot"); |
| |
| /* |
| * See if we can check the M4 status, i.e if it was started |
| * from the boot loader or not. |
| */ |
| err = stm32_rproc_get_syscon(np, "st,syscfg-m4-state", |
| &ddata->m4_state); |
| if (err) { |
| /* remember this */ |
| ddata->m4_state.map = NULL; |
| /* no coprocessor state syscon (optional) */ |
| dev_warn(dev, "m4 state not supported\n"); |
| |
| /* no need to go further */ |
| return 0; |
| } |
| |
| /* See if we can get the resource table */ |
| err = stm32_rproc_get_syscon(np, "st,syscfg-rsc-tbl", |
| &ddata->rsctbl); |
| if (err) { |
| /* no rsc table syscon (optional) */ |
| dev_warn(dev, "rsc tbl syscon not supported\n"); |
| } |
| |
| return 0; |
| } |
| |
| static int stm32_rproc_get_m4_status(struct stm32_rproc *ddata, |
| unsigned int *state) |
| { |
| /* See stm32_rproc_parse_dt() */ |
| if (!ddata->m4_state.map) { |
| /* |
| * We couldn't get the coprocessor's state, assume |
| * it is not running. |
| */ |
| *state = M4_STATE_OFF; |
| return 0; |
| } |
| |
| return regmap_read(ddata->m4_state.map, ddata->m4_state.reg, state); |
| } |
| |
| static int stm32_rproc_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct stm32_rproc *ddata; |
| struct device_node *np = dev->of_node; |
| struct rproc *rproc; |
| unsigned int state; |
| int ret; |
| |
| ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32)); |
| if (ret) |
| return ret; |
| |
| rproc = devm_rproc_alloc(dev, np->name, &st_rproc_ops, NULL, sizeof(*ddata)); |
| if (!rproc) |
| return -ENOMEM; |
| |
| ddata = rproc->priv; |
| |
| rproc_coredump_set_elf_info(rproc, ELFCLASS32, EM_NONE); |
| |
| ret = stm32_rproc_parse_dt(pdev, ddata, &rproc->auto_boot); |
| if (ret) |
| goto free_rproc; |
| |
| ret = stm32_rproc_of_memory_translations(pdev, ddata); |
| if (ret) |
| goto free_rproc; |
| |
| ret = stm32_rproc_get_m4_status(ddata, &state); |
| if (ret) |
| goto free_rproc; |
| |
| if (state == M4_STATE_CRUN) |
| rproc->state = RPROC_DETACHED; |
| |
| rproc->has_iommu = false; |
| ddata->workqueue = create_workqueue(dev_name(dev)); |
| if (!ddata->workqueue) { |
| dev_err(dev, "cannot create workqueue\n"); |
| ret = -ENOMEM; |
| goto free_resources; |
| } |
| |
| platform_set_drvdata(pdev, rproc); |
| |
| ret = stm32_rproc_request_mbox(rproc); |
| if (ret) |
| goto free_wkq; |
| |
| ret = rproc_add(rproc); |
| if (ret) |
| goto free_mb; |
| |
| return 0; |
| |
| free_mb: |
| stm32_rproc_free_mbox(rproc); |
| free_wkq: |
| destroy_workqueue(ddata->workqueue); |
| free_resources: |
| rproc_resource_cleanup(rproc); |
| free_rproc: |
| if (device_may_wakeup(dev)) { |
| dev_pm_clear_wake_irq(dev); |
| device_init_wakeup(dev, false); |
| } |
| return ret; |
| } |
| |
| static void stm32_rproc_remove(struct platform_device *pdev) |
| { |
| struct rproc *rproc = platform_get_drvdata(pdev); |
| struct stm32_rproc *ddata = rproc->priv; |
| struct device *dev = &pdev->dev; |
| |
| if (atomic_read(&rproc->power) > 0) |
| rproc_shutdown(rproc); |
| |
| rproc_del(rproc); |
| stm32_rproc_free_mbox(rproc); |
| destroy_workqueue(ddata->workqueue); |
| |
| if (device_may_wakeup(dev)) { |
| dev_pm_clear_wake_irq(dev); |
| device_init_wakeup(dev, false); |
| } |
| } |
| |
| static int stm32_rproc_suspend(struct device *dev) |
| { |
| struct rproc *rproc = dev_get_drvdata(dev); |
| struct stm32_rproc *ddata = rproc->priv; |
| |
| if (device_may_wakeup(dev)) |
| return enable_irq_wake(ddata->wdg_irq); |
| |
| return 0; |
| } |
| |
| static int stm32_rproc_resume(struct device *dev) |
| { |
| struct rproc *rproc = dev_get_drvdata(dev); |
| struct stm32_rproc *ddata = rproc->priv; |
| |
| if (device_may_wakeup(dev)) |
| return disable_irq_wake(ddata->wdg_irq); |
| |
| return 0; |
| } |
| |
| static DEFINE_SIMPLE_DEV_PM_OPS(stm32_rproc_pm_ops, |
| stm32_rproc_suspend, stm32_rproc_resume); |
| |
| static struct platform_driver stm32_rproc_driver = { |
| .probe = stm32_rproc_probe, |
| .remove_new = stm32_rproc_remove, |
| .driver = { |
| .name = "stm32-rproc", |
| .pm = pm_ptr(&stm32_rproc_pm_ops), |
| .of_match_table = stm32_rproc_match, |
| }, |
| }; |
| module_platform_driver(stm32_rproc_driver); |
| |
| MODULE_DESCRIPTION("STM32 Remote Processor Control Driver"); |
| MODULE_AUTHOR("Ludovic Barre <ludovic.barre@st.com>"); |
| MODULE_AUTHOR("Fabien Dessenne <fabien.dessenne@st.com>"); |
| MODULE_LICENSE("GPL v2"); |
| |