| /* |
| * This file is subject to the terms and conditions of the GNU General Public |
| * License. See the file "COPYING" in the main directory of this archive |
| * for more details. |
| * |
| * Copyright (C) 2003-2005 Silicon Graphics, Inc. All Rights Reserved. |
| */ |
| |
| #include <linux/types.h> |
| #include <linux/interrupt.h> |
| #include <linux/pci.h> |
| #include <asm/sn/sn_sal.h> |
| #include <asm/sn/addrs.h> |
| #include <asm/sn/pcidev.h> |
| #include <asm/sn/pcibus_provider_defs.h> |
| #include <asm/sn/tioce_provider.h> |
| |
| /** |
| * Bus address ranges for the 5 flavors of TIOCE DMA |
| */ |
| |
| #define TIOCE_D64_MIN 0x8000000000000000UL |
| #define TIOCE_D64_MAX 0xffffffffffffffffUL |
| #define TIOCE_D64_ADDR(a) ((a) >= TIOCE_D64_MIN) |
| |
| #define TIOCE_D32_MIN 0x0000000080000000UL |
| #define TIOCE_D32_MAX 0x00000000ffffffffUL |
| #define TIOCE_D32_ADDR(a) ((a) >= TIOCE_D32_MIN && (a) <= TIOCE_D32_MAX) |
| |
| #define TIOCE_M32_MIN 0x0000000000000000UL |
| #define TIOCE_M32_MAX 0x000000007fffffffUL |
| #define TIOCE_M32_ADDR(a) ((a) >= TIOCE_M32_MIN && (a) <= TIOCE_M32_MAX) |
| |
| #define TIOCE_M40_MIN 0x0000004000000000UL |
| #define TIOCE_M40_MAX 0x0000007fffffffffUL |
| #define TIOCE_M40_ADDR(a) ((a) >= TIOCE_M40_MIN && (a) <= TIOCE_M40_MAX) |
| |
| #define TIOCE_M40S_MIN 0x0000008000000000UL |
| #define TIOCE_M40S_MAX 0x000000ffffffffffUL |
| #define TIOCE_M40S_ADDR(a) ((a) >= TIOCE_M40S_MIN && (a) <= TIOCE_M40S_MAX) |
| |
| /* |
| * ATE manipulation macros. |
| */ |
| |
| #define ATE_PAGESHIFT(ps) (__ffs(ps)) |
| #define ATE_PAGEMASK(ps) ((ps)-1) |
| |
| #define ATE_PAGE(x, ps) ((x) >> ATE_PAGESHIFT(ps)) |
| #define ATE_NPAGES(start, len, pagesize) \ |
| (ATE_PAGE((start)+(len)-1, pagesize) - ATE_PAGE(start, pagesize) + 1) |
| |
| #define ATE_VALID(ate) ((ate) & (1UL << 63)) |
| #define ATE_MAKE(addr, ps) (((addr) & ~ATE_PAGEMASK(ps)) | (1UL << 63)) |
| |
| /* |
| * Flavors of ate-based mapping supported by tioce_alloc_map() |
| */ |
| |
| #define TIOCE_ATE_M32 1 |
| #define TIOCE_ATE_M40 2 |
| #define TIOCE_ATE_M40S 3 |
| |
| #define KB(x) ((x) << 10) |
| #define MB(x) ((x) << 20) |
| #define GB(x) ((x) << 30) |
| |
| /** |
| * tioce_dma_d64 - create a DMA mapping using 64-bit direct mode |
| * @ct_addr: system coretalk address |
| * |
| * Map @ct_addr into 64-bit CE bus space. No device context is necessary |
| * and no CE mapping are consumed. |
| * |
| * Bits 53:0 come from the coretalk address. The remaining bits are set as |
| * follows: |
| * |
| * 63 - must be 1 to indicate d64 mode to CE hardware |
| * 62 - barrier bit ... controlled with tioce_dma_barrier() |
| * 61 - 0 since this is not an MSI transaction |
| * 60:54 - reserved, MBZ |
| */ |
| static uint64_t |
| tioce_dma_d64(unsigned long ct_addr) |
| { |
| uint64_t bus_addr; |
| |
| bus_addr = ct_addr | (1UL << 63); |
| |
| return bus_addr; |
| } |
| |
| /** |
| * pcidev_to_tioce - return misc ce related pointers given a pci_dev |
| * @pci_dev: pci device context |
| * @base: ptr to store struct tioce_mmr * for the CE holding this device |
| * @kernel: ptr to store struct tioce_kernel * for the CE holding this device |
| * @port: ptr to store the CE port number that this device is on |
| * |
| * Return pointers to various CE-related structures for the CE upstream of |
| * @pci_dev. |
| */ |
| static inline void |
| pcidev_to_tioce(struct pci_dev *pdev, struct tioce **base, |
| struct tioce_kernel **kernel, int *port) |
| { |
| struct pcidev_info *pcidev_info; |
| struct tioce_common *ce_common; |
| struct tioce_kernel *ce_kernel; |
| |
| pcidev_info = SN_PCIDEV_INFO(pdev); |
| ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; |
| ce_kernel = (struct tioce_kernel *)ce_common->ce_kernel_private; |
| |
| if (base) |
| *base = (struct tioce *)ce_common->ce_pcibus.bs_base; |
| if (kernel) |
| *kernel = ce_kernel; |
| |
| /* |
| * we use port as a zero-based value internally, even though the |
| * documentation is 1-based. |
| */ |
| if (port) |
| *port = |
| (pdev->bus->number < ce_kernel->ce_port1_secondary) ? 0 : 1; |
| } |
| |
| /** |
| * tioce_alloc_map - Given a coretalk address, map it to pcie bus address |
| * space using one of the various ATE-based address modes. |
| * @ce_kern: tioce context |
| * @type: map mode to use |
| * @port: 0-based port that the requesting device is downstream of |
| * @ct_addr: the coretalk address to map |
| * @len: number of bytes to map |
| * |
| * Given the addressing type, set up various paramaters that define the |
| * ATE pool to use. Search for a contiguous block of entries to cover the |
| * length, and if enough resources exist, fill in the ATE's and construct a |
| * tioce_dmamap struct to track the mapping. |
| */ |
| static uint64_t |
| tioce_alloc_map(struct tioce_kernel *ce_kern, int type, int port, |
| uint64_t ct_addr, int len) |
| { |
| int i; |
| int j; |
| int first; |
| int last; |
| int entries; |
| int nates; |
| int pagesize; |
| uint64_t *ate_shadow; |
| uint64_t *ate_reg; |
| uint64_t addr; |
| struct tioce *ce_mmr; |
| uint64_t bus_base; |
| struct tioce_dmamap *map; |
| |
| ce_mmr = (struct tioce *)ce_kern->ce_common->ce_pcibus.bs_base; |
| |
| switch (type) { |
| case TIOCE_ATE_M32: |
| /* |
| * The first 64 entries of the ate3240 pool are dedicated to |
| * super-page (TIOCE_ATE_M40S) mode. |
| */ |
| first = 64; |
| entries = TIOCE_NUM_M3240_ATES - 64; |
| ate_shadow = ce_kern->ce_ate3240_shadow; |
| ate_reg = ce_mmr->ce_ure_ate3240; |
| pagesize = ce_kern->ce_ate3240_pagesize; |
| bus_base = TIOCE_M32_MIN; |
| break; |
| case TIOCE_ATE_M40: |
| first = 0; |
| entries = TIOCE_NUM_M40_ATES; |
| ate_shadow = ce_kern->ce_ate40_shadow; |
| ate_reg = ce_mmr->ce_ure_ate40; |
| pagesize = MB(64); |
| bus_base = TIOCE_M40_MIN; |
| break; |
| case TIOCE_ATE_M40S: |
| /* |
| * ate3240 entries 0-31 are dedicated to port1 super-page |
| * mappings. ate3240 entries 32-63 are dedicated to port2. |
| */ |
| first = port * 32; |
| entries = 32; |
| ate_shadow = ce_kern->ce_ate3240_shadow; |
| ate_reg = ce_mmr->ce_ure_ate3240; |
| pagesize = GB(16); |
| bus_base = TIOCE_M40S_MIN; |
| break; |
| default: |
| return 0; |
| } |
| |
| nates = ATE_NPAGES(ct_addr, len, pagesize); |
| if (nates > entries) |
| return 0; |
| |
| last = first + entries - nates; |
| for (i = first; i <= last; i++) { |
| if (ATE_VALID(ate_shadow[i])) |
| continue; |
| |
| for (j = i; j < i + nates; j++) |
| if (ATE_VALID(ate_shadow[j])) |
| break; |
| |
| if (j >= i + nates) |
| break; |
| } |
| |
| if (i > last) |
| return 0; |
| |
| map = kcalloc(1, sizeof(struct tioce_dmamap), GFP_ATOMIC); |
| if (!map) |
| return 0; |
| |
| addr = ct_addr; |
| for (j = 0; j < nates; j++) { |
| uint64_t ate; |
| |
| ate = ATE_MAKE(addr, pagesize); |
| ate_shadow[i + j] = ate; |
| ate_reg[i + j] = ate; |
| addr += pagesize; |
| } |
| |
| map->refcnt = 1; |
| map->nbytes = nates * pagesize; |
| map->ct_start = ct_addr & ~ATE_PAGEMASK(pagesize); |
| map->pci_start = bus_base + (i * pagesize); |
| map->ate_hw = &ate_reg[i]; |
| map->ate_shadow = &ate_shadow[i]; |
| map->ate_count = nates; |
| |
| list_add(&map->ce_dmamap_list, &ce_kern->ce_dmamap_list); |
| |
| return (map->pci_start + (ct_addr - map->ct_start)); |
| } |
| |
| /** |
| * tioce_dma_d32 - create a DMA mapping using 32-bit direct mode |
| * @pdev: linux pci_dev representing the function |
| * @paddr: system physical address |
| * |
| * Map @paddr into 32-bit bus space of the CE associated with @pcidev_info. |
| */ |
| static uint64_t |
| tioce_dma_d32(struct pci_dev *pdev, uint64_t ct_addr) |
| { |
| int dma_ok; |
| int port; |
| struct tioce *ce_mmr; |
| struct tioce_kernel *ce_kern; |
| uint64_t ct_upper; |
| uint64_t ct_lower; |
| dma_addr_t bus_addr; |
| |
| ct_upper = ct_addr & ~0x3fffffffUL; |
| ct_lower = ct_addr & 0x3fffffffUL; |
| |
| pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port); |
| |
| if (ce_kern->ce_port[port].dirmap_refcnt == 0) { |
| volatile uint64_t tmp; |
| |
| ce_kern->ce_port[port].dirmap_shadow = ct_upper; |
| ce_mmr->ce_ure_dir_map[port] = ct_upper; |
| tmp = ce_mmr->ce_ure_dir_map[port]; |
| dma_ok = 1; |
| } else |
| dma_ok = (ce_kern->ce_port[port].dirmap_shadow == ct_upper); |
| |
| if (dma_ok) { |
| ce_kern->ce_port[port].dirmap_refcnt++; |
| bus_addr = TIOCE_D32_MIN + ct_lower; |
| } else |
| bus_addr = 0; |
| |
| return bus_addr; |
| } |
| |
| /** |
| * tioce_dma_barrier - swizzle a TIOCE bus address to include or exclude |
| * the barrier bit. |
| * @bus_addr: bus address to swizzle |
| * |
| * Given a TIOCE bus address, set the appropriate bit to indicate barrier |
| * attributes. |
| */ |
| static uint64_t |
| tioce_dma_barrier(uint64_t bus_addr, int on) |
| { |
| uint64_t barrier_bit; |
| |
| /* barrier not supported in M40/M40S mode */ |
| if (TIOCE_M40_ADDR(bus_addr) || TIOCE_M40S_ADDR(bus_addr)) |
| return bus_addr; |
| |
| if (TIOCE_D64_ADDR(bus_addr)) |
| barrier_bit = (1UL << 62); |
| else /* must be m32 or d32 */ |
| barrier_bit = (1UL << 30); |
| |
| return (on) ? (bus_addr | barrier_bit) : (bus_addr & ~barrier_bit); |
| } |
| |
| /** |
| * tioce_dma_unmap - release CE mapping resources |
| * @pdev: linux pci_dev representing the function |
| * @bus_addr: bus address returned by an earlier tioce_dma_map |
| * @dir: mapping direction (unused) |
| * |
| * Locate mapping resources associated with @bus_addr and release them. |
| * For mappings created using the direct modes there are no resources |
| * to release. |
| */ |
| void |
| tioce_dma_unmap(struct pci_dev *pdev, dma_addr_t bus_addr, int dir) |
| { |
| int i; |
| int port; |
| struct tioce_kernel *ce_kern; |
| struct tioce *ce_mmr; |
| unsigned long flags; |
| |
| bus_addr = tioce_dma_barrier(bus_addr, 0); |
| pcidev_to_tioce(pdev, &ce_mmr, &ce_kern, &port); |
| |
| /* nothing to do for D64 */ |
| |
| if (TIOCE_D64_ADDR(bus_addr)) |
| return; |
| |
| spin_lock_irqsave(&ce_kern->ce_lock, flags); |
| |
| if (TIOCE_D32_ADDR(bus_addr)) { |
| if (--ce_kern->ce_port[port].dirmap_refcnt == 0) { |
| ce_kern->ce_port[port].dirmap_shadow = 0; |
| ce_mmr->ce_ure_dir_map[port] = 0; |
| } |
| } else { |
| struct tioce_dmamap *map; |
| |
| list_for_each_entry(map, &ce_kern->ce_dmamap_list, |
| ce_dmamap_list) { |
| uint64_t last; |
| |
| last = map->pci_start + map->nbytes - 1; |
| if (bus_addr >= map->pci_start && bus_addr <= last) |
| break; |
| } |
| |
| if (&map->ce_dmamap_list == &ce_kern->ce_dmamap_list) { |
| printk(KERN_WARNING |
| "%s: %s - no map found for bus_addr 0x%lx\n", |
| __FUNCTION__, pci_name(pdev), bus_addr); |
| } else if (--map->refcnt == 0) { |
| for (i = 0; i < map->ate_count; i++) { |
| map->ate_shadow[i] = 0; |
| map->ate_hw[i] = 0; |
| } |
| |
| list_del(&map->ce_dmamap_list); |
| kfree(map); |
| } |
| } |
| |
| spin_unlock_irqrestore(&ce_kern->ce_lock, flags); |
| } |
| |
| /** |
| * tioce_do_dma_map - map pages for PCI DMA |
| * @pdev: linux pci_dev representing the function |
| * @paddr: host physical address to map |
| * @byte_count: bytes to map |
| * |
| * This is the main wrapper for mapping host physical pages to CE PCI space. |
| * The mapping mode used is based on the device's dma_mask. |
| */ |
| static uint64_t |
| tioce_do_dma_map(struct pci_dev *pdev, uint64_t paddr, size_t byte_count, |
| int barrier) |
| { |
| unsigned long flags; |
| uint64_t ct_addr; |
| uint64_t mapaddr = 0; |
| struct tioce_kernel *ce_kern; |
| struct tioce_dmamap *map; |
| int port; |
| uint64_t dma_mask; |
| |
| dma_mask = (barrier) ? pdev->dev.coherent_dma_mask : pdev->dma_mask; |
| |
| /* cards must be able to address at least 31 bits */ |
| if (dma_mask < 0x7fffffffUL) |
| return 0; |
| |
| ct_addr = PHYS_TO_TIODMA(paddr); |
| |
| /* |
| * If the device can generate 64 bit addresses, create a D64 map. |
| * Since this should never fail, bypass the rest of the checks. |
| */ |
| if (dma_mask == ~0UL) { |
| mapaddr = tioce_dma_d64(ct_addr); |
| goto dma_map_done; |
| } |
| |
| pcidev_to_tioce(pdev, NULL, &ce_kern, &port); |
| |
| spin_lock_irqsave(&ce_kern->ce_lock, flags); |
| |
| /* |
| * D64 didn't work ... See if we have an existing map that covers |
| * this address range. Must account for devices dma_mask here since |
| * an existing map might have been done in a mode using more pci |
| * address bits than this device can support. |
| */ |
| list_for_each_entry(map, &ce_kern->ce_dmamap_list, ce_dmamap_list) { |
| uint64_t last; |
| |
| last = map->ct_start + map->nbytes - 1; |
| if (ct_addr >= map->ct_start && |
| ct_addr + byte_count - 1 <= last && |
| map->pci_start <= dma_mask) { |
| map->refcnt++; |
| mapaddr = map->pci_start + (ct_addr - map->ct_start); |
| break; |
| } |
| } |
| |
| /* |
| * If we don't have a map yet, and the card can generate 40 |
| * bit addresses, try the M40/M40S modes. Note these modes do not |
| * support a barrier bit, so if we need a consistent map these |
| * won't work. |
| */ |
| if (!mapaddr && !barrier && dma_mask >= 0xffffffffffUL) { |
| /* |
| * We have two options for 40-bit mappings: 16GB "super" ATE's |
| * and 64MB "regular" ATE's. We'll try both if needed for a |
| * given mapping but which one we try first depends on the |
| * size. For requests >64MB, prefer to use a super page with |
| * regular as the fallback. Otherwise, try in the reverse order. |
| */ |
| |
| if (byte_count > MB(64)) { |
| mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40S, |
| port, ct_addr, byte_count); |
| if (!mapaddr) |
| mapaddr = |
| tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1, |
| ct_addr, byte_count); |
| } else { |
| mapaddr = tioce_alloc_map(ce_kern, TIOCE_ATE_M40, -1, |
| ct_addr, byte_count); |
| if (!mapaddr) |
| mapaddr = |
| tioce_alloc_map(ce_kern, TIOCE_ATE_M40S, |
| port, ct_addr, byte_count); |
| } |
| } |
| |
| /* |
| * 32-bit direct is the next mode to try |
| */ |
| if (!mapaddr && dma_mask >= 0xffffffffUL) |
| mapaddr = tioce_dma_d32(pdev, ct_addr); |
| |
| /* |
| * Last resort, try 32-bit ATE-based map. |
| */ |
| if (!mapaddr) |
| mapaddr = |
| tioce_alloc_map(ce_kern, TIOCE_ATE_M32, -1, ct_addr, |
| byte_count); |
| |
| spin_unlock_irqrestore(&ce_kern->ce_lock, flags); |
| |
| dma_map_done: |
| if (mapaddr & barrier) |
| mapaddr = tioce_dma_barrier(mapaddr, 1); |
| |
| return mapaddr; |
| } |
| |
| /** |
| * tioce_dma - standard pci dma map interface |
| * @pdev: pci device requesting the map |
| * @paddr: system physical address to map into pci space |
| * @byte_count: # bytes to map |
| * |
| * Simply call tioce_do_dma_map() to create a map with the barrier bit clear |
| * in the address. |
| */ |
| static uint64_t |
| tioce_dma(struct pci_dev *pdev, uint64_t paddr, size_t byte_count) |
| { |
| return tioce_do_dma_map(pdev, paddr, byte_count, 0); |
| } |
| |
| /** |
| * tioce_dma_consistent - consistent pci dma map interface |
| * @pdev: pci device requesting the map |
| * @paddr: system physical address to map into pci space |
| * @byte_count: # bytes to map |
| * |
| * Simply call tioce_do_dma_map() to create a map with the barrier bit set |
| * in the address. |
| */ static uint64_t |
| tioce_dma_consistent(struct pci_dev *pdev, uint64_t paddr, size_t byte_count) |
| { |
| return tioce_do_dma_map(pdev, paddr, byte_count, 1); |
| } |
| |
| /** |
| * tioce_error_intr_handler - SGI TIO CE error interrupt handler |
| * @irq: unused |
| * @arg: pointer to tioce_common struct for the given CE |
| * @pt: unused |
| * |
| * Handle a CE error interrupt. Simply a wrapper around a SAL call which |
| * defers processing to the SGI prom. |
| */ static irqreturn_t |
| tioce_error_intr_handler(int irq, void *arg, struct pt_regs *pt) |
| { |
| struct tioce_common *soft = arg; |
| struct ia64_sal_retval ret_stuff; |
| ret_stuff.status = 0; |
| ret_stuff.v0 = 0; |
| |
| SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_ERROR_INTERRUPT, |
| soft->ce_pcibus.bs_persist_segment, |
| soft->ce_pcibus.bs_persist_busnum, 0, 0, 0, 0, 0); |
| |
| return IRQ_HANDLED; |
| } |
| |
| /** |
| * tioce_kern_init - init kernel structures related to a given TIOCE |
| * @tioce_common: ptr to a cached tioce_common struct that originated in prom |
| */ static struct tioce_kernel * |
| tioce_kern_init(struct tioce_common *tioce_common) |
| { |
| int i; |
| uint32_t tmp; |
| struct tioce *tioce_mmr; |
| struct tioce_kernel *tioce_kern; |
| |
| tioce_kern = kcalloc(1, sizeof(struct tioce_kernel), GFP_KERNEL); |
| if (!tioce_kern) { |
| return NULL; |
| } |
| |
| tioce_kern->ce_common = tioce_common; |
| spin_lock_init(&tioce_kern->ce_lock); |
| INIT_LIST_HEAD(&tioce_kern->ce_dmamap_list); |
| tioce_common->ce_kernel_private = (uint64_t) tioce_kern; |
| |
| /* |
| * Determine the secondary bus number of the port2 logical PPB. |
| * This is used to decide whether a given pci device resides on |
| * port1 or port2. Note: We don't have enough plumbing set up |
| * here to use pci_read_config_xxx() so use the raw_pci_ops vector. |
| */ |
| |
| raw_pci_ops->read(tioce_common->ce_pcibus.bs_persist_segment, |
| tioce_common->ce_pcibus.bs_persist_busnum, |
| PCI_DEVFN(2, 0), PCI_SECONDARY_BUS, 1, &tmp); |
| tioce_kern->ce_port1_secondary = (uint8_t) tmp; |
| |
| /* |
| * Set PMU pagesize to the largest size available, and zero out |
| * the ate's. |
| */ |
| |
| tioce_mmr = (struct tioce *)tioce_common->ce_pcibus.bs_base; |
| tioce_mmr->ce_ure_page_map &= ~CE_URE_PAGESIZE_MASK; |
| tioce_mmr->ce_ure_page_map |= CE_URE_256K_PAGESIZE; |
| tioce_kern->ce_ate3240_pagesize = KB(256); |
| |
| for (i = 0; i < TIOCE_NUM_M40_ATES; i++) { |
| tioce_kern->ce_ate40_shadow[i] = 0; |
| tioce_mmr->ce_ure_ate40[i] = 0; |
| } |
| |
| for (i = 0; i < TIOCE_NUM_M3240_ATES; i++) { |
| tioce_kern->ce_ate3240_shadow[i] = 0; |
| tioce_mmr->ce_ure_ate3240[i] = 0; |
| } |
| |
| return tioce_kern; |
| } |
| |
| /** |
| * tioce_force_interrupt - implement altix force_interrupt() backend for CE |
| * @sn_irq_info: sn asic irq that we need an interrupt generated for |
| * |
| * Given an sn_irq_info struct, set the proper bit in ce_adm_force_int to |
| * force a secondary interrupt to be generated. This is to work around an |
| * asic issue where there is a small window of opportunity for a legacy device |
| * interrupt to be lost. |
| */ |
| static void |
| tioce_force_interrupt(struct sn_irq_info *sn_irq_info) |
| { |
| struct pcidev_info *pcidev_info; |
| struct tioce_common *ce_common; |
| struct tioce *ce_mmr; |
| uint64_t force_int_val; |
| |
| if (!sn_irq_info->irq_bridge) |
| return; |
| |
| if (sn_irq_info->irq_bridge_type != PCIIO_ASIC_TYPE_TIOCE) |
| return; |
| |
| pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; |
| if (!pcidev_info) |
| return; |
| |
| ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; |
| ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; |
| |
| /* |
| * irq_int_bit is originally set up by prom, and holds the interrupt |
| * bit shift (not mask) as defined by the bit definitions in the |
| * ce_adm_int mmr. These shifts are not the same for the |
| * ce_adm_force_int register, so do an explicit mapping here to make |
| * things clearer. |
| */ |
| |
| switch (sn_irq_info->irq_int_bit) { |
| case CE_ADM_INT_PCIE_PORT1_DEV_A_SHFT: |
| force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_A_SHFT; |
| break; |
| case CE_ADM_INT_PCIE_PORT1_DEV_B_SHFT: |
| force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_B_SHFT; |
| break; |
| case CE_ADM_INT_PCIE_PORT1_DEV_C_SHFT: |
| force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_C_SHFT; |
| break; |
| case CE_ADM_INT_PCIE_PORT1_DEV_D_SHFT: |
| force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT1_DEV_D_SHFT; |
| break; |
| case CE_ADM_INT_PCIE_PORT2_DEV_A_SHFT: |
| force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_A_SHFT; |
| break; |
| case CE_ADM_INT_PCIE_PORT2_DEV_B_SHFT: |
| force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_B_SHFT; |
| break; |
| case CE_ADM_INT_PCIE_PORT2_DEV_C_SHFT: |
| force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_C_SHFT; |
| break; |
| case CE_ADM_INT_PCIE_PORT2_DEV_D_SHFT: |
| force_int_val = 1UL << CE_ADM_FORCE_INT_PCIE_PORT2_DEV_D_SHFT; |
| break; |
| default: |
| return; |
| } |
| ce_mmr->ce_adm_force_int = force_int_val; |
| } |
| |
| /** |
| * tioce_target_interrupt - implement set_irq_affinity for tioce resident |
| * functions. Note: only applies to line interrupts, not MSI's. |
| * |
| * @sn_irq_info: SN IRQ context |
| * |
| * Given an sn_irq_info, set the associated CE device's interrupt destination |
| * register. Since the interrupt destination registers are on a per-ce-slot |
| * basis, this will retarget line interrupts for all functions downstream of |
| * the slot. |
| */ |
| static void |
| tioce_target_interrupt(struct sn_irq_info *sn_irq_info) |
| { |
| struct pcidev_info *pcidev_info; |
| struct tioce_common *ce_common; |
| struct tioce *ce_mmr; |
| int bit; |
| |
| pcidev_info = (struct pcidev_info *)sn_irq_info->irq_pciioinfo; |
| if (!pcidev_info) |
| return; |
| |
| ce_common = (struct tioce_common *)pcidev_info->pdi_pcibus_info; |
| ce_mmr = (struct tioce *)ce_common->ce_pcibus.bs_base; |
| |
| bit = sn_irq_info->irq_int_bit; |
| |
| ce_mmr->ce_adm_int_mask |= (1UL << bit); |
| ce_mmr->ce_adm_int_dest[bit] = |
| ((uint64_t)sn_irq_info->irq_irq << INTR_VECTOR_SHFT) | |
| sn_irq_info->irq_xtalkaddr; |
| ce_mmr->ce_adm_int_mask &= ~(1UL << bit); |
| |
| tioce_force_interrupt(sn_irq_info); |
| } |
| |
| /** |
| * tioce_bus_fixup - perform final PCI fixup for a TIO CE bus |
| * @prom_bussoft: Common prom/kernel struct representing the bus |
| * |
| * Replicates the tioce_common pointed to by @prom_bussoft in kernel |
| * space. Allocates and initializes a kernel-only area for a given CE, |
| * and sets up an irq for handling CE error interrupts. |
| * |
| * On successful setup, returns the kernel version of tioce_common back to |
| * the caller. |
| */ |
| static void * |
| tioce_bus_fixup(struct pcibus_bussoft *prom_bussoft, struct pci_controller *controller) |
| { |
| struct tioce_common *tioce_common; |
| |
| /* |
| * Allocate kernel bus soft and copy from prom. |
| */ |
| |
| tioce_common = kcalloc(1, sizeof(struct tioce_common), GFP_KERNEL); |
| if (!tioce_common) |
| return NULL; |
| |
| memcpy(tioce_common, prom_bussoft, sizeof(struct tioce_common)); |
| tioce_common->ce_pcibus.bs_base |= __IA64_UNCACHED_OFFSET; |
| |
| if (tioce_kern_init(tioce_common) == NULL) { |
| kfree(tioce_common); |
| return NULL; |
| } |
| |
| if (request_irq(SGI_PCIASIC_ERROR, |
| tioce_error_intr_handler, |
| SA_SHIRQ, "TIOCE error", (void *)tioce_common)) |
| printk(KERN_WARNING |
| "%s: Unable to get irq %d. " |
| "Error interrupts won't be routed for " |
| "TIOCE bus %04x:%02x\n", |
| __FUNCTION__, SGI_PCIASIC_ERROR, |
| tioce_common->ce_pcibus.bs_persist_segment, |
| tioce_common->ce_pcibus.bs_persist_busnum); |
| |
| return tioce_common; |
| } |
| |
| static struct sn_pcibus_provider tioce_pci_interfaces = { |
| .dma_map = tioce_dma, |
| .dma_map_consistent = tioce_dma_consistent, |
| .dma_unmap = tioce_dma_unmap, |
| .bus_fixup = tioce_bus_fixup, |
| .force_interrupt = tioce_force_interrupt, |
| .target_interrupt = tioce_target_interrupt |
| }; |
| |
| /** |
| * tioce_init_provider - init SN PCI provider ops for TIO CE |
| */ |
| int |
| tioce_init_provider(void) |
| { |
| sn_pci_provider[PCIIO_ASIC_TYPE_TIOCE] = &tioce_pci_interfaces; |
| return 0; |
| } |