| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * SCPI Generic power domain support. |
| * |
| * Copyright (C) 2016 ARM Ltd. |
| */ |
| |
| #include <linux/err.h> |
| #include <linux/io.h> |
| #include <linux/module.h> |
| #include <linux/of_platform.h> |
| #include <linux/pm_domain.h> |
| #include <linux/scpi_protocol.h> |
| |
| struct scpi_pm_domain { |
| struct generic_pm_domain genpd; |
| struct scpi_ops *ops; |
| u32 domain; |
| char name[30]; |
| }; |
| |
| /* |
| * These device power state values are not well-defined in the specification. |
| * In case, different implementations use different values, we can make these |
| * specific to compatibles rather than getting these values from device tree. |
| */ |
| enum scpi_power_domain_state { |
| SCPI_PD_STATE_ON = 0, |
| SCPI_PD_STATE_OFF = 3, |
| }; |
| |
| #define to_scpi_pd(gpd) container_of(gpd, struct scpi_pm_domain, genpd) |
| |
| static int scpi_pd_power(struct scpi_pm_domain *pd, bool power_on) |
| { |
| int ret; |
| enum scpi_power_domain_state state; |
| |
| if (power_on) |
| state = SCPI_PD_STATE_ON; |
| else |
| state = SCPI_PD_STATE_OFF; |
| |
| ret = pd->ops->device_set_power_state(pd->domain, state); |
| if (ret) |
| return ret; |
| |
| return !(state == pd->ops->device_get_power_state(pd->domain)); |
| } |
| |
| static int scpi_pd_power_on(struct generic_pm_domain *domain) |
| { |
| struct scpi_pm_domain *pd = to_scpi_pd(domain); |
| |
| return scpi_pd_power(pd, true); |
| } |
| |
| static int scpi_pd_power_off(struct generic_pm_domain *domain) |
| { |
| struct scpi_pm_domain *pd = to_scpi_pd(domain); |
| |
| return scpi_pd_power(pd, false); |
| } |
| |
| static int scpi_pm_domain_probe(struct platform_device *pdev) |
| { |
| struct device *dev = &pdev->dev; |
| struct device_node *np = dev->of_node; |
| struct scpi_pm_domain *scpi_pd; |
| struct genpd_onecell_data *scpi_pd_data; |
| struct generic_pm_domain **domains; |
| struct scpi_ops *scpi_ops; |
| int ret, num_domains, i; |
| |
| scpi_ops = get_scpi_ops(); |
| if (!scpi_ops) |
| return -EPROBE_DEFER; |
| |
| if (!np) { |
| dev_err(dev, "device tree node not found\n"); |
| return -ENODEV; |
| } |
| |
| if (!scpi_ops->device_set_power_state || |
| !scpi_ops->device_get_power_state) { |
| dev_err(dev, "power domains not supported in the firmware\n"); |
| return -ENODEV; |
| } |
| |
| ret = of_property_read_u32(np, "num-domains", &num_domains); |
| if (ret) { |
| dev_err(dev, "number of domains not found\n"); |
| return -EINVAL; |
| } |
| |
| scpi_pd = devm_kcalloc(dev, num_domains, sizeof(*scpi_pd), GFP_KERNEL); |
| if (!scpi_pd) |
| return -ENOMEM; |
| |
| scpi_pd_data = devm_kzalloc(dev, sizeof(*scpi_pd_data), GFP_KERNEL); |
| if (!scpi_pd_data) |
| return -ENOMEM; |
| |
| domains = devm_kcalloc(dev, num_domains, sizeof(*domains), GFP_KERNEL); |
| if (!domains) |
| return -ENOMEM; |
| |
| for (i = 0; i < num_domains; i++, scpi_pd++) { |
| domains[i] = &scpi_pd->genpd; |
| |
| scpi_pd->domain = i; |
| scpi_pd->ops = scpi_ops; |
| sprintf(scpi_pd->name, "%pOFn.%d", np, i); |
| scpi_pd->genpd.name = scpi_pd->name; |
| scpi_pd->genpd.power_off = scpi_pd_power_off; |
| scpi_pd->genpd.power_on = scpi_pd_power_on; |
| |
| /* |
| * Treat all power domains as off at boot. |
| * |
| * The SCP firmware itself may have switched on some domains, |
| * but for reference counting purpose, keep it this way. |
| */ |
| pm_genpd_init(&scpi_pd->genpd, NULL, true); |
| } |
| |
| scpi_pd_data->domains = domains; |
| scpi_pd_data->num_domains = num_domains; |
| |
| of_genpd_add_provider_onecell(np, scpi_pd_data); |
| |
| return 0; |
| } |
| |
| static const struct of_device_id scpi_power_domain_ids[] = { |
| { .compatible = "arm,scpi-power-domains", }, |
| { /* sentinel */ } |
| }; |
| MODULE_DEVICE_TABLE(of, scpi_power_domain_ids); |
| |
| static struct platform_driver scpi_power_domain_driver = { |
| .driver = { |
| .name = "scpi_power_domain", |
| .of_match_table = scpi_power_domain_ids, |
| }, |
| .probe = scpi_pm_domain_probe, |
| }; |
| module_platform_driver(scpi_power_domain_driver); |
| |
| MODULE_AUTHOR("Sudeep Holla <sudeep.holla@arm.com>"); |
| MODULE_DESCRIPTION("ARM SCPI power domain driver"); |
| MODULE_LICENSE("GPL v2"); |