| /* SPDX-License-Identifier: GPL-2.0 */ |
| /* Parts of this driver are based on the following: |
| * - Kvaser linux leaf driver (version 4.78) |
| * - CAN driver for esd CAN-USB/2 |
| * - Kvaser linux usbcanII driver (version 5.3) |
| * - Kvaser linux mhydra driver (version 5.24) |
| * |
| * Copyright (C) 2002-2018 KVASER AB, Sweden. All rights reserved. |
| * Copyright (C) 2010 Matthias Fuchs <matthias.fuchs@esd.eu>, esd gmbh |
| * Copyright (C) 2012 Olivier Sobrie <olivier@sobrie.be> |
| * Copyright (C) 2015 Valeo S.A. |
| */ |
| |
| #ifndef KVASER_USB_H |
| #define KVASER_USB_H |
| |
| /* Kvaser USB CAN dongles are divided into three major platforms: |
| * - Hydra: Running firmware labeled as 'mhydra' |
| * - Leaf: Based on Renesas M32C or Freescale i.MX28, running firmware labeled |
| * as 'filo' |
| * - UsbcanII: Based on Renesas M16C, running firmware labeled as 'helios' |
| */ |
| |
| #include <linux/completion.h> |
| #include <linux/spinlock.h> |
| #include <linux/types.h> |
| #include <linux/usb.h> |
| |
| #include <linux/can.h> |
| #include <linux/can/dev.h> |
| |
| #define KVASER_USB_MAX_RX_URBS 4 |
| #define KVASER_USB_MAX_TX_URBS 128 |
| #define KVASER_USB_TIMEOUT 1000 /* msecs */ |
| #define KVASER_USB_RX_BUFFER_SIZE 3072 |
| #define KVASER_USB_MAX_NET_DEVICES 5 |
| |
| /* USB devices features */ |
| #define KVASER_USB_HAS_SILENT_MODE BIT(0) |
| #define KVASER_USB_HAS_TXRX_ERRORS BIT(1) |
| |
| /* Device capabilities */ |
| #define KVASER_USB_CAP_BERR_CAP 0x01 |
| #define KVASER_USB_CAP_EXT_CAP 0x02 |
| #define KVASER_USB_HYDRA_CAP_EXT_CMD 0x04 |
| |
| struct kvaser_usb_dev_cfg; |
| |
| enum kvaser_usb_leaf_family { |
| KVASER_LEAF, |
| KVASER_USBCAN, |
| }; |
| |
| #define KVASER_USB_HYDRA_MAX_CMD_LEN 128 |
| struct kvaser_usb_dev_card_data_hydra { |
| u8 channel_to_he[KVASER_USB_MAX_NET_DEVICES]; |
| u8 sysdbg_he; |
| spinlock_t transid_lock; /* lock for transid */ |
| u16 transid; |
| /* lock for usb_rx_leftover and usb_rx_leftover_len */ |
| spinlock_t usb_rx_leftover_lock; |
| u8 usb_rx_leftover[KVASER_USB_HYDRA_MAX_CMD_LEN]; |
| u8 usb_rx_leftover_len; |
| }; |
| struct kvaser_usb_dev_card_data { |
| u32 ctrlmode_supported; |
| u32 capabilities; |
| union { |
| struct { |
| enum kvaser_usb_leaf_family family; |
| } leaf; |
| struct kvaser_usb_dev_card_data_hydra hydra; |
| }; |
| }; |
| |
| /* Context for an outstanding, not yet ACKed, transmission */ |
| struct kvaser_usb_tx_urb_context { |
| struct kvaser_usb_net_priv *priv; |
| u32 echo_index; |
| int dlc; |
| }; |
| |
| struct kvaser_usb { |
| struct usb_device *udev; |
| struct usb_interface *intf; |
| struct kvaser_usb_net_priv *nets[KVASER_USB_MAX_NET_DEVICES]; |
| const struct kvaser_usb_dev_ops *ops; |
| const struct kvaser_usb_dev_cfg *cfg; |
| |
| struct usb_endpoint_descriptor *bulk_in, *bulk_out; |
| struct usb_anchor rx_submitted; |
| |
| /* @max_tx_urbs: Firmware-reported maximum number of outstanding, |
| * not yet ACKed, transmissions on this device. This value is |
| * also used as a sentinel for marking free tx contexts. |
| */ |
| u32 fw_version; |
| unsigned int nchannels; |
| unsigned int max_tx_urbs; |
| struct kvaser_usb_dev_card_data card_data; |
| |
| bool rxinitdone; |
| void *rxbuf[KVASER_USB_MAX_RX_URBS]; |
| dma_addr_t rxbuf_dma[KVASER_USB_MAX_RX_URBS]; |
| }; |
| |
| struct kvaser_usb_net_priv { |
| struct can_priv can; |
| struct can_berr_counter bec; |
| |
| struct kvaser_usb *dev; |
| struct net_device *netdev; |
| int channel; |
| |
| struct completion start_comp, stop_comp, flush_comp; |
| struct usb_anchor tx_submitted; |
| |
| spinlock_t tx_contexts_lock; /* lock for active_tx_contexts */ |
| int active_tx_contexts; |
| struct kvaser_usb_tx_urb_context tx_contexts[]; |
| }; |
| |
| /** |
| * struct kvaser_usb_dev_ops - Device specific functions |
| * @dev_set_mode: used for can.do_set_mode |
| * @dev_set_bittiming: used for can.do_set_bittiming |
| * @dev_set_data_bittiming: used for can.do_set_data_bittiming |
| * @dev_get_berr_counter: used for can.do_get_berr_counter |
| * |
| * @dev_setup_endpoints: setup USB in and out endpoints |
| * @dev_init_card: initialize card |
| * @dev_get_software_info: get software info |
| * @dev_get_software_details: get software details |
| * @dev_get_card_info: get card info |
| * @dev_get_capabilities: discover device capabilities |
| * |
| * @dev_set_opt_mode: set ctrlmod |
| * @dev_start_chip: start the CAN controller |
| * @dev_stop_chip: stop the CAN controller |
| * @dev_reset_chip: reset the CAN controller |
| * @dev_flush_queue: flush outstanding CAN messages |
| * @dev_read_bulk_callback: handle incoming commands |
| * @dev_frame_to_cmd: translate struct can_frame into device command |
| */ |
| struct kvaser_usb_dev_ops { |
| int (*dev_set_mode)(struct net_device *netdev, enum can_mode mode); |
| int (*dev_set_bittiming)(struct net_device *netdev); |
| int (*dev_set_data_bittiming)(struct net_device *netdev); |
| int (*dev_get_berr_counter)(const struct net_device *netdev, |
| struct can_berr_counter *bec); |
| int (*dev_setup_endpoints)(struct kvaser_usb *dev); |
| int (*dev_init_card)(struct kvaser_usb *dev); |
| int (*dev_get_software_info)(struct kvaser_usb *dev); |
| int (*dev_get_software_details)(struct kvaser_usb *dev); |
| int (*dev_get_card_info)(struct kvaser_usb *dev); |
| int (*dev_get_capabilities)(struct kvaser_usb *dev); |
| int (*dev_set_opt_mode)(const struct kvaser_usb_net_priv *priv); |
| int (*dev_start_chip)(struct kvaser_usb_net_priv *priv); |
| int (*dev_stop_chip)(struct kvaser_usb_net_priv *priv); |
| int (*dev_reset_chip)(struct kvaser_usb *dev, int channel); |
| int (*dev_flush_queue)(struct kvaser_usb_net_priv *priv); |
| void (*dev_read_bulk_callback)(struct kvaser_usb *dev, void *buf, |
| int len); |
| void *(*dev_frame_to_cmd)(const struct kvaser_usb_net_priv *priv, |
| const struct sk_buff *skb, int *frame_len, |
| int *cmd_len, u16 transid); |
| }; |
| |
| struct kvaser_usb_dev_cfg { |
| const struct can_clock clock; |
| const unsigned int timestamp_freq; |
| const struct can_bittiming_const * const bittiming_const; |
| const struct can_bittiming_const * const data_bittiming_const; |
| }; |
| |
| extern const struct kvaser_usb_dev_ops kvaser_usb_hydra_dev_ops; |
| extern const struct kvaser_usb_dev_ops kvaser_usb_leaf_dev_ops; |
| |
| int kvaser_usb_recv_cmd(const struct kvaser_usb *dev, void *cmd, int len, |
| int *actual_len); |
| |
| int kvaser_usb_send_cmd(const struct kvaser_usb *dev, void *cmd, int len); |
| |
| int kvaser_usb_send_cmd_async(struct kvaser_usb_net_priv *priv, void *cmd, |
| int len); |
| |
| int kvaser_usb_can_rx_over_error(struct net_device *netdev); |
| #endif /* KVASER_USB_H */ |