| /* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */ |
| /* Copyright 2013-2016 Freescale Semiconductor Inc. |
| * Copyright 2016 NXP |
| * Copyright 2020 NXP |
| */ |
| #ifndef __FSL_DPNI_H |
| #define __FSL_DPNI_H |
| |
| #include "dpkg.h" |
| |
| struct fsl_mc_io; |
| |
| /* Data Path Network Interface API |
| * Contains initialization APIs and runtime control APIs for DPNI |
| */ |
| |
| /** General DPNI macros */ |
| |
| /** |
| * DPNI_MAX_TC - Maximum number of traffic classes |
| */ |
| #define DPNI_MAX_TC 8 |
| /** |
| * DPNI_MAX_DPBP - Maximum number of buffer pools per DPNI |
| */ |
| #define DPNI_MAX_DPBP 8 |
| |
| /** |
| * DPNI_ALL_TCS - All traffic classes considered; see dpni_set_queue() |
| */ |
| #define DPNI_ALL_TCS (u8)(-1) |
| /** |
| * DPNI_ALL_TC_FLOWS - All flows within traffic class considered; see |
| * dpni_set_queue() |
| */ |
| #define DPNI_ALL_TC_FLOWS (u16)(-1) |
| /** |
| * DPNI_NEW_FLOW_ID - Generate new flow ID; see dpni_set_queue() |
| */ |
| #define DPNI_NEW_FLOW_ID (u16)(-1) |
| |
| /** |
| * DPNI_OPT_TX_FRM_RELEASE - Tx traffic is always released to a buffer pool on |
| * transmit, there are no resources allocated to have the frames confirmed back |
| * to the source after transmission. |
| */ |
| #define DPNI_OPT_TX_FRM_RELEASE 0x000001 |
| /** |
| * DPNI_OPT_NO_MAC_FILTER - Disables support for MAC address filtering for |
| * addresses other than primary MAC address. This affects both unicast and |
| * multicast. Promiscuous mode can still be enabled/disabled for both unicast |
| * and multicast. If promiscuous mode is disabled, only traffic matching the |
| * primary MAC address will be accepted. |
| */ |
| #define DPNI_OPT_NO_MAC_FILTER 0x000002 |
| /** |
| * DPNI_OPT_HAS_POLICING - Allocate policers for this DPNI. They can be used to |
| * rate-limit traffic per traffic class (TC) basis. |
| */ |
| #define DPNI_OPT_HAS_POLICING 0x000004 |
| /** |
| * DPNI_OPT_SHARED_CONGESTION - Congestion can be managed in several ways, |
| * allowing the buffer pool to deplete on ingress, taildrop on each queue or |
| * use congestion groups for sets of queues. If set, it configures a single |
| * congestion groups across all TCs. If reset, a congestion group is allocated |
| * for each TC. Only relevant if the DPNI has multiple traffic classes. |
| */ |
| #define DPNI_OPT_SHARED_CONGESTION 0x000008 |
| /** |
| * DPNI_OPT_HAS_KEY_MASKING - Enables TCAM for Flow Steering and QoS look-ups. |
| * If not specified, all look-ups are exact match. Note that TCAM is not |
| * available on LS1088 and its variants. Setting this bit on these SoCs will |
| * trigger an error. |
| */ |
| #define DPNI_OPT_HAS_KEY_MASKING 0x000010 |
| /** |
| * DPNI_OPT_NO_FS - Disables the flow steering table. |
| */ |
| #define DPNI_OPT_NO_FS 0x000020 |
| /** |
| * DPNI_OPT_SHARED_FS - Flow steering table is shared between all traffic |
| * classes |
| */ |
| #define DPNI_OPT_SHARED_FS 0x001000 |
| |
| int dpni_open(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| int dpni_id, |
| u16 *token); |
| |
| int dpni_close(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token); |
| |
| /** |
| * struct dpni_pools_cfg - Structure representing buffer pools configuration |
| * @num_dpbp: Number of DPBPs |
| * @pools: Array of buffer pools parameters; The number of valid entries |
| * must match 'num_dpbp' value |
| * @pools.dpbp_id: DPBP object ID |
| * @pools.buffer_size: Buffer size |
| * @pools.backup_pool: Backup pool |
| */ |
| struct dpni_pools_cfg { |
| u8 num_dpbp; |
| struct { |
| int dpbp_id; |
| u16 buffer_size; |
| int backup_pool; |
| } pools[DPNI_MAX_DPBP]; |
| }; |
| |
| int dpni_set_pools(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const struct dpni_pools_cfg *cfg); |
| |
| int dpni_enable(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token); |
| |
| int dpni_disable(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token); |
| |
| int dpni_is_enabled(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| int *en); |
| |
| int dpni_reset(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token); |
| |
| /* DPNI IRQ Index and Events */ |
| |
| #define DPNI_IRQ_INDEX 0 |
| |
| /* DPNI_IRQ_EVENT_LINK_CHANGED - indicates a change in link state */ |
| #define DPNI_IRQ_EVENT_LINK_CHANGED 0x00000001 |
| |
| /* DPNI_IRQ_EVENT_ENDPOINT_CHANGED - indicates a change in endpoint */ |
| #define DPNI_IRQ_EVENT_ENDPOINT_CHANGED 0x00000002 |
| |
| int dpni_set_irq_enable(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 irq_index, |
| u8 en); |
| |
| int dpni_get_irq_enable(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 irq_index, |
| u8 *en); |
| |
| int dpni_set_irq_mask(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 irq_index, |
| u32 mask); |
| |
| int dpni_get_irq_mask(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 irq_index, |
| u32 *mask); |
| |
| int dpni_get_irq_status(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 irq_index, |
| u32 *status); |
| |
| int dpni_clear_irq_status(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 irq_index, |
| u32 status); |
| |
| /** |
| * struct dpni_attr - Structure representing DPNI attributes |
| * @options: Any combination of the following options: |
| * DPNI_OPT_TX_FRM_RELEASE |
| * DPNI_OPT_NO_MAC_FILTER |
| * DPNI_OPT_HAS_POLICING |
| * DPNI_OPT_SHARED_CONGESTION |
| * DPNI_OPT_HAS_KEY_MASKING |
| * DPNI_OPT_NO_FS |
| * @num_queues: Number of Tx and Rx queues used for traffic distribution. |
| * @num_tcs: Number of traffic classes (TCs), reserved for the DPNI. |
| * @mac_filter_entries: Number of entries in the MAC address filtering table. |
| * @vlan_filter_entries: Number of entries in the VLAN address filtering table. |
| * @qos_entries: Number of entries in the QoS classification table. |
| * @fs_entries: Number of entries in the flow steering table. |
| * @qos_key_size: Size, in bytes, of the QoS look-up key. Defining a key larger |
| * than this when adding QoS entries will result in an error. |
| * @fs_key_size: Size, in bytes, of the flow steering look-up key. Defining a |
| * key larger than this when composing the hash + FS key will |
| * result in an error. |
| * @wriop_version: Version of WRIOP HW block. The 3 version values are stored |
| * on 6, 5, 5 bits respectively. |
| */ |
| struct dpni_attr { |
| u32 options; |
| u8 num_queues; |
| u8 num_tcs; |
| u8 mac_filter_entries; |
| u8 vlan_filter_entries; |
| u8 qos_entries; |
| u16 fs_entries; |
| u8 qos_key_size; |
| u8 fs_key_size; |
| u16 wriop_version; |
| }; |
| |
| int dpni_get_attributes(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| struct dpni_attr *attr); |
| |
| /* DPNI errors */ |
| |
| /** |
| * DPNI_ERROR_EOFHE - Extract out of frame header error |
| */ |
| #define DPNI_ERROR_EOFHE 0x00020000 |
| /** |
| * DPNI_ERROR_FLE - Frame length error |
| */ |
| #define DPNI_ERROR_FLE 0x00002000 |
| /** |
| * DPNI_ERROR_FPE - Frame physical error |
| */ |
| #define DPNI_ERROR_FPE 0x00001000 |
| /** |
| * DPNI_ERROR_PHE - Parsing header error |
| */ |
| #define DPNI_ERROR_PHE 0x00000020 |
| /** |
| * DPNI_ERROR_L3CE - Parser L3 checksum error |
| */ |
| #define DPNI_ERROR_L3CE 0x00000004 |
| /** |
| * DPNI_ERROR_L4CE - Parser L3 checksum error |
| */ |
| #define DPNI_ERROR_L4CE 0x00000001 |
| |
| /** |
| * enum dpni_error_action - Defines DPNI behavior for errors |
| * @DPNI_ERROR_ACTION_DISCARD: Discard the frame |
| * @DPNI_ERROR_ACTION_CONTINUE: Continue with the normal flow |
| * @DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE: Send the frame to the error queue |
| */ |
| enum dpni_error_action { |
| DPNI_ERROR_ACTION_DISCARD = 0, |
| DPNI_ERROR_ACTION_CONTINUE = 1, |
| DPNI_ERROR_ACTION_SEND_TO_ERROR_QUEUE = 2 |
| }; |
| |
| /** |
| * struct dpni_error_cfg - Structure representing DPNI errors treatment |
| * @errors: Errors mask; use 'DPNI_ERROR__<X> |
| * @error_action: The desired action for the errors mask |
| * @set_frame_annotation: Set to '1' to mark the errors in frame annotation |
| * status (FAS); relevant only for the non-discard action |
| */ |
| struct dpni_error_cfg { |
| u32 errors; |
| enum dpni_error_action error_action; |
| int set_frame_annotation; |
| }; |
| |
| int dpni_set_errors_behavior(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| struct dpni_error_cfg *cfg); |
| |
| /* DPNI buffer layout modification options */ |
| |
| /** |
| * DPNI_BUF_LAYOUT_OPT_TIMESTAMP - Select to modify the time-stamp setting |
| */ |
| #define DPNI_BUF_LAYOUT_OPT_TIMESTAMP 0x00000001 |
| /** |
| * DPNI_BUF_LAYOUT_OPT_PARSER_RESULT - Select to modify the parser-result |
| * setting; not applicable for Tx |
| */ |
| #define DPNI_BUF_LAYOUT_OPT_PARSER_RESULT 0x00000002 |
| /** |
| * DPNI_BUF_LAYOUT_OPT_FRAME_STATUS - Select to modify the frame-status setting |
| */ |
| #define DPNI_BUF_LAYOUT_OPT_FRAME_STATUS 0x00000004 |
| /** |
| * DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE - Select to modify the private-data-size setting |
| */ |
| #define DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE 0x00000008 |
| /** |
| * DPNI_BUF_LAYOUT_OPT_DATA_ALIGN - Select to modify the data-alignment setting |
| */ |
| #define DPNI_BUF_LAYOUT_OPT_DATA_ALIGN 0x00000010 |
| /** |
| * DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM - Select to modify the data-head-room setting |
| */ |
| #define DPNI_BUF_LAYOUT_OPT_DATA_HEAD_ROOM 0x00000020 |
| /** |
| * DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM - Select to modify the data-tail-room setting |
| */ |
| #define DPNI_BUF_LAYOUT_OPT_DATA_TAIL_ROOM 0x00000040 |
| |
| /** |
| * struct dpni_buffer_layout - Structure representing DPNI buffer layout |
| * @options: Flags representing the suggested modifications to the buffer |
| * layout; Use any combination of 'DPNI_BUF_LAYOUT_OPT_<X>' flags |
| * @pass_timestamp: Pass timestamp value |
| * @pass_parser_result: Pass parser results |
| * @pass_frame_status: Pass frame status |
| * @private_data_size: Size kept for private data (in bytes) |
| * @data_align: Data alignment |
| * @data_head_room: Data head room |
| * @data_tail_room: Data tail room |
| */ |
| struct dpni_buffer_layout { |
| u32 options; |
| int pass_timestamp; |
| int pass_parser_result; |
| int pass_frame_status; |
| u16 private_data_size; |
| u16 data_align; |
| u16 data_head_room; |
| u16 data_tail_room; |
| }; |
| |
| /** |
| * enum dpni_queue_type - Identifies a type of queue targeted by the command |
| * @DPNI_QUEUE_RX: Rx queue |
| * @DPNI_QUEUE_TX: Tx queue |
| * @DPNI_QUEUE_TX_CONFIRM: Tx confirmation queue |
| * @DPNI_QUEUE_RX_ERR: Rx error queue |
| */ |
| enum dpni_queue_type { |
| DPNI_QUEUE_RX, |
| DPNI_QUEUE_TX, |
| DPNI_QUEUE_TX_CONFIRM, |
| DPNI_QUEUE_RX_ERR, |
| }; |
| |
| int dpni_get_buffer_layout(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_queue_type qtype, |
| struct dpni_buffer_layout *layout); |
| |
| int dpni_set_buffer_layout(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_queue_type qtype, |
| const struct dpni_buffer_layout *layout); |
| |
| /** |
| * enum dpni_offload - Identifies a type of offload targeted by the command |
| * @DPNI_OFF_RX_L3_CSUM: Rx L3 checksum validation |
| * @DPNI_OFF_RX_L4_CSUM: Rx L4 checksum validation |
| * @DPNI_OFF_TX_L3_CSUM: Tx L3 checksum generation |
| * @DPNI_OFF_TX_L4_CSUM: Tx L4 checksum generation |
| */ |
| enum dpni_offload { |
| DPNI_OFF_RX_L3_CSUM, |
| DPNI_OFF_RX_L4_CSUM, |
| DPNI_OFF_TX_L3_CSUM, |
| DPNI_OFF_TX_L4_CSUM, |
| }; |
| |
| int dpni_set_offload(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_offload type, |
| u32 config); |
| |
| int dpni_get_offload(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_offload type, |
| u32 *config); |
| |
| int dpni_get_qdid(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_queue_type qtype, |
| u16 *qdid); |
| |
| int dpni_get_tx_data_offset(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u16 *data_offset); |
| |
| #define DPNI_STATISTICS_CNT 7 |
| |
| /** |
| * union dpni_statistics - Union describing the DPNI statistics |
| * @page_0: Page_0 statistics structure |
| * @page_0.ingress_all_frames: Ingress frame count |
| * @page_0.ingress_all_bytes: Ingress byte count |
| * @page_0.ingress_multicast_frames: Ingress multicast frame count |
| * @page_0.ingress_multicast_bytes: Ingress multicast byte count |
| * @page_0.ingress_broadcast_frames: Ingress broadcast frame count |
| * @page_0.ingress_broadcast_bytes: Ingress broadcast byte count |
| * @page_1: Page_1 statistics structure |
| * @page_1.egress_all_frames: Egress frame count |
| * @page_1.egress_all_bytes: Egress byte count |
| * @page_1.egress_multicast_frames: Egress multicast frame count |
| * @page_1.egress_multicast_bytes: Egress multicast byte count |
| * @page_1.egress_broadcast_frames: Egress broadcast frame count |
| * @page_1.egress_broadcast_bytes: Egress broadcast byte count |
| * @page_2: Page_2 statistics structure |
| * @page_2.ingress_filtered_frames: Ingress filtered frame count |
| * @page_2.ingress_discarded_frames: Ingress discarded frame count |
| * @page_2.ingress_nobuffer_discards: Ingress discarded frame count due to |
| * lack of buffers |
| * @page_2.egress_discarded_frames: Egress discarded frame count |
| * @page_2.egress_confirmed_frames: Egress confirmed frame count |
| * @page_3: Page_3 statistics structure |
| * @page_3.egress_dequeue_bytes: Cumulative count of the number of bytes |
| * dequeued from egress FQs |
| * @page_3.egress_dequeue_frames: Cumulative count of the number of frames |
| * dequeued from egress FQs |
| * @page_3.egress_reject_bytes: Cumulative count of the number of bytes in |
| * egress frames whose enqueue was rejected |
| * @page_3.egress_reject_frames: Cumulative count of the number of egress |
| * frames whose enqueue was rejected |
| * @page_4: Page_4 statistics structure: congestion points |
| * @page_4.cgr_reject_frames: number of rejected frames due to congestion point |
| * @page_4.cgr_reject_bytes: number of rejected bytes due to congestion point |
| * @page_5: Page_5 statistics structure: policer |
| * @page_5.policer_cnt_red: NUmber of red colored frames |
| * @page_5.policer_cnt_yellow: number of yellow colored frames |
| * @page_5.policer_cnt_green: number of green colored frames |
| * @page_5.policer_cnt_re_red: number of recolored red frames |
| * @page_5.policer_cnt_re_yellow: number of recolored yellow frames |
| * @page_6: Page_6 statistics structure |
| * @page_6.tx_pending_frames: total number of frames pending in egress FQs |
| * @raw: raw statistics structure, used to index counters |
| */ |
| union dpni_statistics { |
| struct { |
| u64 ingress_all_frames; |
| u64 ingress_all_bytes; |
| u64 ingress_multicast_frames; |
| u64 ingress_multicast_bytes; |
| u64 ingress_broadcast_frames; |
| u64 ingress_broadcast_bytes; |
| } page_0; |
| struct { |
| u64 egress_all_frames; |
| u64 egress_all_bytes; |
| u64 egress_multicast_frames; |
| u64 egress_multicast_bytes; |
| u64 egress_broadcast_frames; |
| u64 egress_broadcast_bytes; |
| } page_1; |
| struct { |
| u64 ingress_filtered_frames; |
| u64 ingress_discarded_frames; |
| u64 ingress_nobuffer_discards; |
| u64 egress_discarded_frames; |
| u64 egress_confirmed_frames; |
| } page_2; |
| struct { |
| u64 egress_dequeue_bytes; |
| u64 egress_dequeue_frames; |
| u64 egress_reject_bytes; |
| u64 egress_reject_frames; |
| } page_3; |
| struct { |
| u64 cgr_reject_frames; |
| u64 cgr_reject_bytes; |
| } page_4; |
| struct { |
| u64 policer_cnt_red; |
| u64 policer_cnt_yellow; |
| u64 policer_cnt_green; |
| u64 policer_cnt_re_red; |
| u64 policer_cnt_re_yellow; |
| } page_5; |
| struct { |
| u64 tx_pending_frames; |
| } page_6; |
| struct { |
| u64 counter[DPNI_STATISTICS_CNT]; |
| } raw; |
| }; |
| |
| int dpni_get_statistics(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 page, |
| union dpni_statistics *stat); |
| |
| #define DPNI_LINK_OPT_AUTONEG 0x0000000000000001ULL |
| #define DPNI_LINK_OPT_HALF_DUPLEX 0x0000000000000002ULL |
| #define DPNI_LINK_OPT_PAUSE 0x0000000000000004ULL |
| #define DPNI_LINK_OPT_ASYM_PAUSE 0x0000000000000008ULL |
| #define DPNI_LINK_OPT_PFC_PAUSE 0x0000000000000010ULL |
| |
| /** |
| * struct dpni_link_cfg - Structure representing DPNI link configuration |
| * @rate: Rate |
| * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values |
| */ |
| struct dpni_link_cfg { |
| u32 rate; |
| u64 options; |
| }; |
| |
| int dpni_set_link_cfg(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const struct dpni_link_cfg *cfg); |
| |
| int dpni_get_link_cfg(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| struct dpni_link_cfg *cfg); |
| |
| /** |
| * struct dpni_link_state - Structure representing DPNI link state |
| * @rate: Rate |
| * @options: Mask of available options; use 'DPNI_LINK_OPT_<X>' values |
| * @up: Link state; '0' for down, '1' for up |
| */ |
| struct dpni_link_state { |
| u32 rate; |
| u64 options; |
| int up; |
| }; |
| |
| int dpni_get_link_state(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| struct dpni_link_state *state); |
| |
| int dpni_set_max_frame_length(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u16 max_frame_length); |
| |
| int dpni_get_max_frame_length(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u16 *max_frame_length); |
| |
| int dpni_set_multicast_promisc(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| int en); |
| |
| int dpni_get_multicast_promisc(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| int *en); |
| |
| int dpni_set_unicast_promisc(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| int en); |
| |
| int dpni_get_unicast_promisc(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| int *en); |
| |
| int dpni_set_primary_mac_addr(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const u8 mac_addr[6]); |
| |
| int dpni_get_primary_mac_addr(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 mac_addr[6]); |
| |
| int dpni_get_port_mac_addr(struct fsl_mc_io *mc_io, |
| u32 cm_flags, |
| u16 token, |
| u8 mac_addr[6]); |
| |
| int dpni_add_mac_addr(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const u8 mac_addr[6]); |
| |
| int dpni_remove_mac_addr(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const u8 mac_addr[6]); |
| |
| int dpni_clear_mac_filters(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| int unicast, |
| int multicast); |
| |
| /** |
| * enum dpni_dist_mode - DPNI distribution mode |
| * @DPNI_DIST_MODE_NONE: No distribution |
| * @DPNI_DIST_MODE_HASH: Use hash distribution; only relevant if |
| * the 'DPNI_OPT_DIST_HASH' option was set at DPNI creation |
| * @DPNI_DIST_MODE_FS: Use explicit flow steering; only relevant if |
| * the 'DPNI_OPT_DIST_FS' option was set at DPNI creation |
| */ |
| enum dpni_dist_mode { |
| DPNI_DIST_MODE_NONE = 0, |
| DPNI_DIST_MODE_HASH = 1, |
| DPNI_DIST_MODE_FS = 2 |
| }; |
| |
| /** |
| * enum dpni_fs_miss_action - DPNI Flow Steering miss action |
| * @DPNI_FS_MISS_DROP: In case of no-match, drop the frame |
| * @DPNI_FS_MISS_EXPLICIT_FLOWID: In case of no-match, use explicit flow-id |
| * @DPNI_FS_MISS_HASH: In case of no-match, distribute using hash |
| */ |
| enum dpni_fs_miss_action { |
| DPNI_FS_MISS_DROP = 0, |
| DPNI_FS_MISS_EXPLICIT_FLOWID = 1, |
| DPNI_FS_MISS_HASH = 2 |
| }; |
| |
| /** |
| * struct dpni_fs_tbl_cfg - Flow Steering table configuration |
| * @miss_action: Miss action selection |
| * @default_flow_id: Used when 'miss_action = DPNI_FS_MISS_EXPLICIT_FLOWID' |
| */ |
| struct dpni_fs_tbl_cfg { |
| enum dpni_fs_miss_action miss_action; |
| u16 default_flow_id; |
| }; |
| |
| int dpni_prepare_key_cfg(const struct dpkg_profile_cfg *cfg, |
| u8 *key_cfg_buf); |
| |
| /** |
| * struct dpni_rx_tc_dist_cfg - Rx traffic class distribution configuration |
| * @dist_size: Set the distribution size; |
| * supported values: 1,2,3,4,6,7,8,12,14,16,24,28,32,48,56,64,96, |
| * 112,128,192,224,256,384,448,512,768,896,1024 |
| * @dist_mode: Distribution mode |
| * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with |
| * the extractions to be used for the distribution key by calling |
| * dpni_prepare_key_cfg() relevant only when |
| * 'dist_mode != DPNI_DIST_MODE_NONE', otherwise it can be '0' |
| * @fs_cfg: Flow Steering table configuration; only relevant if |
| * 'dist_mode = DPNI_DIST_MODE_FS' |
| */ |
| struct dpni_rx_tc_dist_cfg { |
| u16 dist_size; |
| enum dpni_dist_mode dist_mode; |
| u64 key_cfg_iova; |
| struct dpni_fs_tbl_cfg fs_cfg; |
| }; |
| |
| int dpni_set_rx_tc_dist(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 tc_id, |
| const struct dpni_rx_tc_dist_cfg *cfg); |
| |
| /** |
| * DPNI_FS_MISS_DROP - When used for fs_miss_flow_id in function |
| * dpni_set_rx_dist, will signal to dpni to drop all unclassified frames |
| */ |
| #define DPNI_FS_MISS_DROP ((uint16_t)-1) |
| |
| /** |
| * struct dpni_rx_dist_cfg - Rx distribution configuration |
| * @dist_size: distribution size |
| * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with |
| * the extractions to be used for the distribution key by calling |
| * dpni_prepare_key_cfg(); relevant only when enable!=0 otherwise |
| * it can be '0' |
| * @enable: enable/disable the distribution. |
| * @tc: TC id for which distribution is set |
| * @fs_miss_flow_id: when packet misses all rules from flow steering table and |
| * hash is disabled it will be put into this queue id; use |
| * DPNI_FS_MISS_DROP to drop frames. The value of this field is |
| * used only when flow steering distribution is enabled and hash |
| * distribution is disabled |
| */ |
| struct dpni_rx_dist_cfg { |
| u16 dist_size; |
| u64 key_cfg_iova; |
| u8 enable; |
| u8 tc; |
| u16 fs_miss_flow_id; |
| }; |
| |
| int dpni_set_rx_fs_dist(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const struct dpni_rx_dist_cfg *cfg); |
| |
| int dpni_set_rx_hash_dist(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const struct dpni_rx_dist_cfg *cfg); |
| |
| /** |
| * struct dpni_qos_tbl_cfg - Structure representing QOS table configuration |
| * @key_cfg_iova: I/O virtual address of 256 bytes DMA-able memory filled with |
| * key extractions to be used as the QoS criteria by calling |
| * dpkg_prepare_key_cfg() |
| * @discard_on_miss: Set to '1' to discard frames in case of no match (miss); |
| * '0' to use the 'default_tc' in such cases |
| * @default_tc: Used in case of no-match and 'discard_on_miss'= 0 |
| */ |
| struct dpni_qos_tbl_cfg { |
| u64 key_cfg_iova; |
| int discard_on_miss; |
| u8 default_tc; |
| }; |
| |
| int dpni_set_qos_table(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const struct dpni_qos_tbl_cfg *cfg); |
| |
| /** |
| * enum dpni_dest - DPNI destination types |
| * @DPNI_DEST_NONE: Unassigned destination; The queue is set in parked mode and |
| * does not generate FQDAN notifications; user is expected to |
| * dequeue from the queue based on polling or other user-defined |
| * method |
| * @DPNI_DEST_DPIO: The queue is set in schedule mode and generates FQDAN |
| * notifications to the specified DPIO; user is expected to dequeue |
| * from the queue only after notification is received |
| * @DPNI_DEST_DPCON: The queue is set in schedule mode and does not generate |
| * FQDAN notifications, but is connected to the specified DPCON |
| * object; user is expected to dequeue from the DPCON channel |
| */ |
| enum dpni_dest { |
| DPNI_DEST_NONE = 0, |
| DPNI_DEST_DPIO = 1, |
| DPNI_DEST_DPCON = 2 |
| }; |
| |
| /** |
| * struct dpni_queue - Queue structure |
| * @destination: - Destination structure |
| * @destination.id: ID of the destination, only relevant if DEST_TYPE is > 0. |
| * Identifies either a DPIO or a DPCON object. |
| * Not relevant for Tx queues. |
| * @destination.type: May be one of the following: |
| * 0 - No destination, queue can be manually |
| * queried, but will not push traffic or |
| * notifications to a DPIO; |
| * 1 - The destination is a DPIO. When traffic |
| * becomes available in the queue a FQDAN |
| * (FQ data available notification) will be |
| * generated to selected DPIO; |
| * 2 - The destination is a DPCON. The queue is |
| * associated with a DPCON object for the |
| * purpose of scheduling between multiple |
| * queues. The DPCON may be independently |
| * configured to generate notifications. |
| * Not relevant for Tx queues. |
| * @destination.hold_active: Hold active, maintains a queue scheduled for longer |
| * in a DPIO during dequeue to reduce spread of traffic. |
| * Only relevant if queues are |
| * not affined to a single DPIO. |
| * @user_context: User data, presented to the user along with any frames |
| * from this queue. Not relevant for Tx queues. |
| * @flc: FD FLow Context structure |
| * @flc.value: Default FLC value for traffic dequeued from |
| * this queue. Please check description of FD |
| * structure for more information. |
| * Note that FLC values set using dpni_add_fs_entry, |
| * if any, take precedence over values per queue. |
| * @flc.stash_control: Boolean, indicates whether the 6 lowest |
| * - significant bits are used for stash control. |
| * significant bits are used for stash control. If set, the 6 |
| * least significant bits in value are interpreted as follows: |
| * - bits 0-1: indicates the number of 64 byte units of context |
| * that are stashed. FLC value is interpreted as a memory address |
| * in this case, excluding the 6 LS bits. |
| * - bits 2-3: indicates the number of 64 byte units of frame |
| * annotation to be stashed. Annotation is placed at FD[ADDR]. |
| * - bits 4-5: indicates the number of 64 byte units of frame |
| * data to be stashed. Frame data is placed at FD[ADDR] + |
| * FD[OFFSET]. |
| * For more details check the Frame Descriptor section in the |
| * hardware documentation. |
| */ |
| struct dpni_queue { |
| struct { |
| u16 id; |
| enum dpni_dest type; |
| char hold_active; |
| u8 priority; |
| } destination; |
| u64 user_context; |
| struct { |
| u64 value; |
| char stash_control; |
| } flc; |
| }; |
| |
| /** |
| * struct dpni_queue_id - Queue identification, used for enqueue commands |
| * or queue control |
| * @fqid: FQID used for enqueueing to and/or configuration of this specific FQ |
| * @qdbin: Queueing bin, used to enqueue using QDID, DQBIN, QPRI. Only relevant |
| * for Tx queues. |
| */ |
| struct dpni_queue_id { |
| u32 fqid; |
| u16 qdbin; |
| }; |
| |
| /* Set User Context */ |
| #define DPNI_QUEUE_OPT_USER_CTX 0x00000001 |
| #define DPNI_QUEUE_OPT_DEST 0x00000002 |
| #define DPNI_QUEUE_OPT_FLC 0x00000004 |
| #define DPNI_QUEUE_OPT_HOLD_ACTIVE 0x00000008 |
| |
| int dpni_set_queue(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_queue_type qtype, |
| u8 tc, |
| u8 index, |
| u8 options, |
| const struct dpni_queue *queue); |
| |
| int dpni_get_queue(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_queue_type qtype, |
| u8 tc, |
| u8 index, |
| struct dpni_queue *queue, |
| struct dpni_queue_id *qid); |
| |
| /** |
| * enum dpni_congestion_unit - DPNI congestion units |
| * @DPNI_CONGESTION_UNIT_BYTES: bytes units |
| * @DPNI_CONGESTION_UNIT_FRAMES: frames units |
| */ |
| enum dpni_congestion_unit { |
| DPNI_CONGESTION_UNIT_BYTES = 0, |
| DPNI_CONGESTION_UNIT_FRAMES |
| }; |
| |
| /** |
| * enum dpni_congestion_point - Structure representing congestion point |
| * @DPNI_CP_QUEUE: Set taildrop per queue, identified by QUEUE_TYPE, TC and |
| * QUEUE_INDEX |
| * @DPNI_CP_GROUP: Set taildrop per queue group. Depending on options used to |
| * define the DPNI this can be either per TC (default) or per |
| * interface (DPNI_OPT_SHARED_CONGESTION set at DPNI create). |
| * QUEUE_INDEX is ignored if this type is used. |
| */ |
| enum dpni_congestion_point { |
| DPNI_CP_QUEUE, |
| DPNI_CP_GROUP, |
| }; |
| |
| /** |
| * struct dpni_dest_cfg - Structure representing DPNI destination parameters |
| * @dest_type: Destination type |
| * @dest_id: Either DPIO ID or DPCON ID, depending on the destination type |
| * @priority: Priority selection within the DPIO or DPCON channel; valid |
| * values are 0-1 or 0-7, depending on the number of priorities |
| * in that channel; not relevant for 'DPNI_DEST_NONE' option |
| */ |
| struct dpni_dest_cfg { |
| enum dpni_dest dest_type; |
| int dest_id; |
| u8 priority; |
| }; |
| |
| /* DPNI congestion options */ |
| |
| /** |
| * DPNI_CONG_OPT_FLOW_CONTROL - This congestion will trigger flow control or |
| * priority flow control. This will have effect only if flow control is |
| * enabled with dpni_set_link_cfg(). |
| */ |
| #define DPNI_CONG_OPT_FLOW_CONTROL 0x00000040 |
| |
| /** |
| * struct dpni_congestion_notification_cfg - congestion notification |
| * configuration |
| * @units: Units type |
| * @threshold_entry: Above this threshold we enter a congestion state. |
| * set it to '0' to disable it |
| * @threshold_exit: Below this threshold we exit the congestion state. |
| * @message_ctx: The context that will be part of the CSCN message |
| * @message_iova: I/O virtual address (must be in DMA-able memory), |
| * must be 16B aligned; valid only if 'DPNI_CONG_OPT_WRITE_MEM_<X>' |
| * is contained in 'options' |
| * @dest_cfg: CSCN can be send to either DPIO or DPCON WQ channel |
| * @notification_mode: Mask of available options; use 'DPNI_CONG_OPT_<X>' values |
| */ |
| |
| struct dpni_congestion_notification_cfg { |
| enum dpni_congestion_unit units; |
| u32 threshold_entry; |
| u32 threshold_exit; |
| u64 message_ctx; |
| u64 message_iova; |
| struct dpni_dest_cfg dest_cfg; |
| u16 notification_mode; |
| }; |
| |
| int dpni_set_congestion_notification( |
| struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_queue_type qtype, |
| u8 tc_id, |
| const struct dpni_congestion_notification_cfg *cfg); |
| |
| /** |
| * struct dpni_taildrop - Structure representing the taildrop |
| * @enable: Indicates whether the taildrop is active or not. |
| * @units: Indicates the unit of THRESHOLD. Queue taildrop only supports |
| * byte units, this field is ignored and assumed = 0 if |
| * CONGESTION_POINT is 0. |
| * @threshold: Threshold value, in units identified by UNITS field. Value 0 |
| * cannot be used as a valid taildrop threshold, THRESHOLD must |
| * be > 0 if the taildrop is enabled. |
| */ |
| struct dpni_taildrop { |
| char enable; |
| enum dpni_congestion_unit units; |
| u32 threshold; |
| }; |
| |
| int dpni_set_taildrop(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_congestion_point cg_point, |
| enum dpni_queue_type q_type, |
| u8 tc, |
| u8 q_index, |
| struct dpni_taildrop *taildrop); |
| |
| int dpni_get_taildrop(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| enum dpni_congestion_point cg_point, |
| enum dpni_queue_type q_type, |
| u8 tc, |
| u8 q_index, |
| struct dpni_taildrop *taildrop); |
| |
| /** |
| * struct dpni_rule_cfg - Rule configuration for table lookup |
| * @key_iova: I/O virtual address of the key (must be in DMA-able memory) |
| * @mask_iova: I/O virtual address of the mask (must be in DMA-able memory) |
| * @key_size: key and mask size (in bytes) |
| */ |
| struct dpni_rule_cfg { |
| u64 key_iova; |
| u64 mask_iova; |
| u8 key_size; |
| }; |
| |
| /** |
| * DPNI_FS_OPT_DISCARD - Discard matching traffic. If set, this takes |
| * precedence over any other configuration and matching traffic is always |
| * discarded. |
| */ |
| #define DPNI_FS_OPT_DISCARD 0x1 |
| |
| /** |
| * DPNI_FS_OPT_SET_FLC - Set FLC value. If set, flc member of struct |
| * dpni_fs_action_cfg is used to override the FLC value set per queue. |
| * For more details check the Frame Descriptor section in the hardware |
| * documentation. |
| */ |
| #define DPNI_FS_OPT_SET_FLC 0x2 |
| |
| /** |
| * DPNI_FS_OPT_SET_STASH_CONTROL - Indicates whether the 6 lowest significant |
| * bits of FLC are used for stash control. If set, the 6 least significant bits |
| * in value are interpreted as follows: |
| * - bits 0-1: indicates the number of 64 byte units of context that are |
| * stashed. FLC value is interpreted as a memory address in this case, |
| * excluding the 6 LS bits. |
| * - bits 2-3: indicates the number of 64 byte units of frame annotation |
| * to be stashed. Annotation is placed at FD[ADDR]. |
| * - bits 4-5: indicates the number of 64 byte units of frame data to be |
| * stashed. Frame data is placed at FD[ADDR] + FD[OFFSET]. |
| * This flag is ignored if DPNI_FS_OPT_SET_FLC is not specified. |
| */ |
| #define DPNI_FS_OPT_SET_STASH_CONTROL 0x4 |
| |
| /** |
| * struct dpni_fs_action_cfg - Action configuration for table look-up |
| * @flc: FLC value for traffic matching this rule. Please check the |
| * Frame Descriptor section in the hardware documentation for |
| * more information. |
| * @flow_id: Identifies the Rx queue used for matching traffic. Supported |
| * values are in range 0 to num_queue-1. |
| * @options: Any combination of DPNI_FS_OPT_ values. |
| */ |
| struct dpni_fs_action_cfg { |
| u64 flc; |
| u16 flow_id; |
| u16 options; |
| }; |
| |
| int dpni_add_fs_entry(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 tc_id, |
| u16 index, |
| const struct dpni_rule_cfg *cfg, |
| const struct dpni_fs_action_cfg *action); |
| |
| int dpni_remove_fs_entry(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| u8 tc_id, |
| const struct dpni_rule_cfg *cfg); |
| |
| int dpni_add_qos_entry(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const struct dpni_rule_cfg *cfg, |
| u8 tc_id, |
| u16 index); |
| |
| int dpni_remove_qos_entry(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const struct dpni_rule_cfg *cfg); |
| |
| int dpni_clear_qos_table(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token); |
| |
| int dpni_get_api_version(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 *major_ver, |
| u16 *minor_ver); |
| /** |
| * struct dpni_tx_shaping_cfg - Structure representing DPNI tx shaping configuration |
| * @rate_limit: Rate in Mbps |
| * @max_burst_size: Burst size in bytes (up to 64KB) |
| */ |
| struct dpni_tx_shaping_cfg { |
| u32 rate_limit; |
| u16 max_burst_size; |
| }; |
| |
| int dpni_set_tx_shaping(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| const struct dpni_tx_shaping_cfg *tx_cr_shaper, |
| const struct dpni_tx_shaping_cfg *tx_er_shaper, |
| int coupled); |
| |
| /** |
| * struct dpni_single_step_cfg - configure single step PTP (IEEE 1588) |
| * @en: enable single step PTP. When enabled the PTPv1 functionality |
| * will not work. If the field is zero, offset and ch_update |
| * parameters will be ignored |
| * @offset: start offset from the beginning of the frame where |
| * timestamp field is found. The offset must respect all MAC |
| * headers, VLAN tags and other protocol headers |
| * @ch_update: when set UDP checksum will be updated inside packet |
| * @peer_delay: For peer-to-peer transparent clocks add this value to the |
| * correction field in addition to the transient time update. |
| * The value expresses nanoseconds. |
| */ |
| struct dpni_single_step_cfg { |
| u8 en; |
| u8 ch_update; |
| u16 offset; |
| u32 peer_delay; |
| }; |
| |
| int dpni_set_single_step_cfg(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| struct dpni_single_step_cfg *ptp_cfg); |
| |
| int dpni_get_single_step_cfg(struct fsl_mc_io *mc_io, |
| u32 cmd_flags, |
| u16 token, |
| struct dpni_single_step_cfg *ptp_cfg); |
| |
| int dpni_enable_vlan_filter(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, |
| u32 en); |
| |
| int dpni_add_vlan_id(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, |
| u16 vlan_id, u8 flags, u8 tc_id, u8 flow_id); |
| |
| int dpni_remove_vlan_id(struct fsl_mc_io *mc_io, u32 cmd_flags, u16 token, |
| u16 vlan_id); |
| |
| #endif /* __FSL_DPNI_H */ |