| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright(c) 1999 - 2018 Intel Corporation. */ |
| |
| #include <linux/types.h> |
| #include <linux/module.h> |
| #include <linux/pci.h> |
| #include <linux/netdevice.h> |
| #include <linux/vmalloc.h> |
| #include <linux/string.h> |
| #include <linux/in.h> |
| #include <linux/ip.h> |
| #include <linux/tcp.h> |
| #include <linux/ipv6.h> |
| #include <linux/if_bridge.h> |
| #ifdef NETIF_F_HW_VLAN_CTAG_TX |
| #include <linux/if_vlan.h> |
| #endif |
| |
| #include "ixgbe.h" |
| #include "ixgbe_type.h" |
| #include "ixgbe_sriov.h" |
| |
| #ifdef CONFIG_PCI_IOV |
| static inline void ixgbe_alloc_vf_macvlans(struct ixgbe_adapter *adapter, |
| unsigned int num_vfs) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct vf_macvlans *mv_list; |
| int num_vf_macvlans, i; |
| |
| num_vf_macvlans = hw->mac.num_rar_entries - |
| (IXGBE_MAX_PF_MACVLANS + 1 + num_vfs); |
| if (!num_vf_macvlans) |
| return; |
| |
| mv_list = kcalloc(num_vf_macvlans, sizeof(struct vf_macvlans), |
| GFP_KERNEL); |
| if (mv_list) { |
| /* Initialize list of VF macvlans */ |
| INIT_LIST_HEAD(&adapter->vf_mvs.l); |
| for (i = 0; i < num_vf_macvlans; i++) { |
| mv_list[i].vf = -1; |
| mv_list[i].free = true; |
| list_add(&mv_list[i].l, &adapter->vf_mvs.l); |
| } |
| adapter->mv_list = mv_list; |
| } |
| } |
| |
| static int __ixgbe_enable_sriov(struct ixgbe_adapter *adapter, |
| unsigned int num_vfs) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| |
| if (adapter->xdp_prog) { |
| e_warn(probe, "SRIOV is not supported with XDP\n"); |
| return -EINVAL; |
| } |
| |
| /* Enable VMDq flag so device will be set in VM mode */ |
| adapter->flags |= IXGBE_FLAG_SRIOV_ENABLED | |
| IXGBE_FLAG_VMDQ_ENABLED; |
| |
| /* Allocate memory for per VF control structures */ |
| adapter->vfinfo = kcalloc(num_vfs, sizeof(struct vf_data_storage), |
| GFP_KERNEL); |
| if (!adapter->vfinfo) |
| return -ENOMEM; |
| |
| adapter->num_vfs = num_vfs; |
| |
| ixgbe_alloc_vf_macvlans(adapter, num_vfs); |
| adapter->ring_feature[RING_F_VMDQ].offset = num_vfs; |
| |
| /* Initialize default switching mode VEB */ |
| IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, IXGBE_PFDTXGSWC_VT_LBEN); |
| adapter->bridge_mode = BRIDGE_MODE_VEB; |
| |
| /* limit trafffic classes based on VFs enabled */ |
| if ((adapter->hw.mac.type == ixgbe_mac_82599EB) && (num_vfs < 16)) { |
| adapter->dcb_cfg.num_tcs.pg_tcs = MAX_TRAFFIC_CLASS; |
| adapter->dcb_cfg.num_tcs.pfc_tcs = MAX_TRAFFIC_CLASS; |
| } else if (num_vfs < 32) { |
| adapter->dcb_cfg.num_tcs.pg_tcs = 4; |
| adapter->dcb_cfg.num_tcs.pfc_tcs = 4; |
| } else { |
| adapter->dcb_cfg.num_tcs.pg_tcs = 1; |
| adapter->dcb_cfg.num_tcs.pfc_tcs = 1; |
| } |
| |
| /* Disable RSC when in SR-IOV mode */ |
| adapter->flags2 &= ~(IXGBE_FLAG2_RSC_CAPABLE | |
| IXGBE_FLAG2_RSC_ENABLED); |
| |
| for (i = 0; i < num_vfs; i++) { |
| /* enable spoof checking for all VFs */ |
| adapter->vfinfo[i].spoofchk_enabled = true; |
| |
| /* We support VF RSS querying only for 82599 and x540 |
| * devices at the moment. These devices share RSS |
| * indirection table and RSS hash key with PF therefore |
| * we want to disable the querying by default. |
| */ |
| adapter->vfinfo[i].rss_query_enabled = false; |
| |
| /* Untrust all VFs */ |
| adapter->vfinfo[i].trusted = false; |
| |
| /* set the default xcast mode */ |
| adapter->vfinfo[i].xcast_mode = IXGBEVF_XCAST_MODE_NONE; |
| } |
| |
| e_info(probe, "SR-IOV enabled with %d VFs\n", num_vfs); |
| return 0; |
| } |
| |
| /** |
| * ixgbe_get_vfs - Find and take references to all vf devices |
| * @adapter: Pointer to adapter struct |
| */ |
| static void ixgbe_get_vfs(struct ixgbe_adapter *adapter) |
| { |
| struct pci_dev *pdev = adapter->pdev; |
| u16 vendor = pdev->vendor; |
| struct pci_dev *vfdev; |
| int vf = 0; |
| u16 vf_id; |
| int pos; |
| |
| pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_SRIOV); |
| if (!pos) |
| return; |
| pci_read_config_word(pdev, pos + PCI_SRIOV_VF_DID, &vf_id); |
| |
| vfdev = pci_get_device(vendor, vf_id, NULL); |
| for (; vfdev; vfdev = pci_get_device(vendor, vf_id, vfdev)) { |
| if (!vfdev->is_virtfn) |
| continue; |
| if (vfdev->physfn != pdev) |
| continue; |
| if (vf >= adapter->num_vfs) |
| continue; |
| pci_dev_get(vfdev); |
| adapter->vfinfo[vf].vfdev = vfdev; |
| ++vf; |
| } |
| } |
| |
| /* Note this function is called when the user wants to enable SR-IOV |
| * VFs using the now deprecated module parameter |
| */ |
| void ixgbe_enable_sriov(struct ixgbe_adapter *adapter, unsigned int max_vfs) |
| { |
| int pre_existing_vfs = 0; |
| unsigned int num_vfs; |
| |
| pre_existing_vfs = pci_num_vf(adapter->pdev); |
| if (!pre_existing_vfs && !max_vfs) |
| return; |
| |
| /* If there are pre-existing VFs then we have to force |
| * use of that many - over ride any module parameter value. |
| * This may result from the user unloading the PF driver |
| * while VFs were assigned to guest VMs or because the VFs |
| * have been created via the new PCI SR-IOV sysfs interface. |
| */ |
| if (pre_existing_vfs) { |
| num_vfs = pre_existing_vfs; |
| dev_warn(&adapter->pdev->dev, |
| "Virtual Functions already enabled for this device - Please reload all VF drivers to avoid spoofed packet errors\n"); |
| } else { |
| int err; |
| /* |
| * The 82599 supports up to 64 VFs per physical function |
| * but this implementation limits allocation to 63 so that |
| * basic networking resources are still available to the |
| * physical function. If the user requests greater than |
| * 63 VFs then it is an error - reset to default of zero. |
| */ |
| num_vfs = min_t(unsigned int, max_vfs, IXGBE_MAX_VFS_DRV_LIMIT); |
| |
| err = pci_enable_sriov(adapter->pdev, num_vfs); |
| if (err) { |
| e_err(probe, "Failed to enable PCI sriov: %d\n", err); |
| return; |
| } |
| } |
| |
| if (!__ixgbe_enable_sriov(adapter, num_vfs)) { |
| ixgbe_get_vfs(adapter); |
| return; |
| } |
| |
| /* If we have gotten to this point then there is no memory available |
| * to manage the VF devices - print message and bail. |
| */ |
| e_err(probe, "Unable to allocate memory for VF Data Storage - " |
| "SRIOV disabled\n"); |
| ixgbe_disable_sriov(adapter); |
| } |
| |
| #endif /* #ifdef CONFIG_PCI_IOV */ |
| int ixgbe_disable_sriov(struct ixgbe_adapter *adapter) |
| { |
| unsigned int num_vfs = adapter->num_vfs, vf; |
| int rss; |
| |
| /* set num VFs to 0 to prevent access to vfinfo */ |
| adapter->num_vfs = 0; |
| |
| /* put the reference to all of the vf devices */ |
| for (vf = 0; vf < num_vfs; ++vf) { |
| struct pci_dev *vfdev = adapter->vfinfo[vf].vfdev; |
| |
| if (!vfdev) |
| continue; |
| adapter->vfinfo[vf].vfdev = NULL; |
| pci_dev_put(vfdev); |
| } |
| |
| /* free VF control structures */ |
| kfree(adapter->vfinfo); |
| adapter->vfinfo = NULL; |
| |
| /* free macvlan list */ |
| kfree(adapter->mv_list); |
| adapter->mv_list = NULL; |
| |
| /* if SR-IOV is already disabled then there is nothing to do */ |
| if (!(adapter->flags & IXGBE_FLAG_SRIOV_ENABLED)) |
| return 0; |
| |
| #ifdef CONFIG_PCI_IOV |
| /* |
| * If our VFs are assigned we cannot shut down SR-IOV |
| * without causing issues, so just leave the hardware |
| * available but disabled |
| */ |
| if (pci_vfs_assigned(adapter->pdev)) { |
| e_dev_warn("Unloading driver while VFs are assigned - VFs will not be deallocated\n"); |
| return -EPERM; |
| } |
| /* disable iov and allow time for transactions to clear */ |
| pci_disable_sriov(adapter->pdev); |
| #endif |
| |
| /* Disable VMDq flag so device will be set in VM mode */ |
| if (bitmap_weight(adapter->fwd_bitmask, adapter->num_rx_pools) == 1) { |
| adapter->flags &= ~IXGBE_FLAG_VMDQ_ENABLED; |
| adapter->flags &= ~IXGBE_FLAG_SRIOV_ENABLED; |
| rss = min_t(int, ixgbe_max_rss_indices(adapter), |
| num_online_cpus()); |
| } else { |
| rss = min_t(int, IXGBE_MAX_L2A_QUEUES, num_online_cpus()); |
| } |
| |
| adapter->ring_feature[RING_F_VMDQ].offset = 0; |
| adapter->ring_feature[RING_F_RSS].limit = rss; |
| |
| /* take a breather then clean up driver data */ |
| msleep(100); |
| return 0; |
| } |
| |
| static int ixgbe_pci_sriov_enable(struct pci_dev *dev, int num_vfs) |
| { |
| #ifdef CONFIG_PCI_IOV |
| struct ixgbe_adapter *adapter = pci_get_drvdata(dev); |
| int pre_existing_vfs = pci_num_vf(dev); |
| int err = 0, num_rx_pools, i, limit; |
| u8 num_tc; |
| |
| if (pre_existing_vfs && pre_existing_vfs != num_vfs) |
| err = ixgbe_disable_sriov(adapter); |
| else if (pre_existing_vfs && pre_existing_vfs == num_vfs) |
| return num_vfs; |
| |
| if (err) |
| return err; |
| |
| /* While the SR-IOV capability structure reports total VFs to be 64, |
| * we limit the actual number allocated as below based on two factors. |
| * Num_TCs MAX_VFs |
| * 1 63 |
| * <=4 31 |
| * >4 15 |
| * First, we reserve some transmit/receive resources for the PF. |
| * Second, VMDQ also uses the same pools that SR-IOV does. We need to |
| * account for this, so that we don't accidentally allocate more VFs |
| * than we have available pools. The PCI bus driver already checks for |
| * other values out of range. |
| */ |
| num_tc = adapter->hw_tcs; |
| num_rx_pools = bitmap_weight(adapter->fwd_bitmask, |
| adapter->num_rx_pools); |
| limit = (num_tc > 4) ? IXGBE_MAX_VFS_8TC : |
| (num_tc > 1) ? IXGBE_MAX_VFS_4TC : IXGBE_MAX_VFS_1TC; |
| |
| if (num_vfs > (limit - num_rx_pools)) { |
| e_dev_err("Currently configured with %d TCs, and %d offloaded macvlans. Creating more than %d VFs is not allowed\n", |
| num_tc, num_rx_pools - 1, limit - num_rx_pools); |
| return -EPERM; |
| } |
| |
| err = __ixgbe_enable_sriov(adapter, num_vfs); |
| if (err) |
| return err; |
| |
| for (i = 0; i < num_vfs; i++) |
| ixgbe_vf_configuration(dev, (i | 0x10000000)); |
| |
| /* reset before enabling SRIOV to avoid mailbox issues */ |
| ixgbe_sriov_reinit(adapter); |
| |
| err = pci_enable_sriov(dev, num_vfs); |
| if (err) { |
| e_dev_warn("Failed to enable PCI sriov: %d\n", err); |
| return err; |
| } |
| ixgbe_get_vfs(adapter); |
| |
| return num_vfs; |
| #else |
| return 0; |
| #endif |
| } |
| |
| static int ixgbe_pci_sriov_disable(struct pci_dev *dev) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(dev); |
| int err; |
| #ifdef CONFIG_PCI_IOV |
| u32 current_flags = adapter->flags; |
| int prev_num_vf = pci_num_vf(dev); |
| #endif |
| |
| err = ixgbe_disable_sriov(adapter); |
| |
| /* Only reinit if no error and state changed */ |
| #ifdef CONFIG_PCI_IOV |
| if (!err && (current_flags != adapter->flags || |
| prev_num_vf != pci_num_vf(dev))) |
| ixgbe_sriov_reinit(adapter); |
| #endif |
| |
| return err; |
| } |
| |
| int ixgbe_pci_sriov_configure(struct pci_dev *dev, int num_vfs) |
| { |
| if (num_vfs == 0) |
| return ixgbe_pci_sriov_disable(dev); |
| else |
| return ixgbe_pci_sriov_enable(dev, num_vfs); |
| } |
| |
| static int ixgbe_set_vf_multicasts(struct ixgbe_adapter *adapter, |
| u32 *msgbuf, u32 vf) |
| { |
| int entries = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) |
| >> IXGBE_VT_MSGINFO_SHIFT; |
| u16 *hash_list = (u16 *)&msgbuf[1]; |
| struct vf_data_storage *vfinfo = &adapter->vfinfo[vf]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| int i; |
| u32 vector_bit; |
| u32 vector_reg; |
| u32 mta_reg; |
| u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf)); |
| |
| /* only so many hash values supported */ |
| entries = min(entries, IXGBE_MAX_VF_MC_ENTRIES); |
| |
| /* |
| * salt away the number of multi cast addresses assigned |
| * to this VF for later use to restore when the PF multi cast |
| * list changes |
| */ |
| vfinfo->num_vf_mc_hashes = entries; |
| |
| /* |
| * VFs are limited to using the MTA hash table for their multicast |
| * addresses |
| */ |
| for (i = 0; i < entries; i++) { |
| vfinfo->vf_mc_hashes[i] = hash_list[i]; |
| } |
| |
| for (i = 0; i < vfinfo->num_vf_mc_hashes; i++) { |
| vector_reg = (vfinfo->vf_mc_hashes[i] >> 5) & 0x7F; |
| vector_bit = vfinfo->vf_mc_hashes[i] & 0x1F; |
| mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg)); |
| mta_reg |= BIT(vector_bit); |
| IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg); |
| } |
| vmolr |= IXGBE_VMOLR_ROMPE; |
| IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_PCI_IOV |
| void ixgbe_restore_vf_multicasts(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct vf_data_storage *vfinfo; |
| int i, j; |
| u32 vector_bit; |
| u32 vector_reg; |
| u32 mta_reg; |
| |
| for (i = 0; i < adapter->num_vfs; i++) { |
| u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(i)); |
| vfinfo = &adapter->vfinfo[i]; |
| for (j = 0; j < vfinfo->num_vf_mc_hashes; j++) { |
| hw->addr_ctrl.mta_in_use++; |
| vector_reg = (vfinfo->vf_mc_hashes[j] >> 5) & 0x7F; |
| vector_bit = vfinfo->vf_mc_hashes[j] & 0x1F; |
| mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg)); |
| mta_reg |= BIT(vector_bit); |
| IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg); |
| } |
| |
| if (vfinfo->num_vf_mc_hashes) |
| vmolr |= IXGBE_VMOLR_ROMPE; |
| else |
| vmolr &= ~IXGBE_VMOLR_ROMPE; |
| IXGBE_WRITE_REG(hw, IXGBE_VMOLR(i), vmolr); |
| } |
| |
| /* Restore any VF macvlans */ |
| ixgbe_full_sync_mac_table(adapter); |
| } |
| #endif |
| |
| static int ixgbe_set_vf_vlan(struct ixgbe_adapter *adapter, int add, int vid, |
| u32 vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int err; |
| |
| /* If VLAN overlaps with one the PF is currently monitoring make |
| * sure that we are able to allocate a VLVF entry. This may be |
| * redundant but it guarantees PF will maintain visibility to |
| * the VLAN. |
| */ |
| if (add && test_bit(vid, adapter->active_vlans)) { |
| err = hw->mac.ops.set_vfta(hw, vid, VMDQ_P(0), true, false); |
| if (err) |
| return err; |
| } |
| |
| err = hw->mac.ops.set_vfta(hw, vid, vf, !!add, false); |
| |
| if (add && !err) |
| return err; |
| |
| /* If we failed to add the VF VLAN or we are removing the VF VLAN |
| * we may need to drop the PF pool bit in order to allow us to free |
| * up the VLVF resources. |
| */ |
| if (test_bit(vid, adapter->active_vlans) || |
| (adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) |
| ixgbe_update_pf_promisc_vlvf(adapter, vid); |
| |
| return err; |
| } |
| |
| static int ixgbe_set_vf_lpe(struct ixgbe_adapter *adapter, u32 max_frame, u32 vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 max_frs; |
| |
| if (max_frame < ETH_MIN_MTU || max_frame > IXGBE_MAX_JUMBO_FRAME_SIZE) { |
| e_err(drv, "VF max_frame %d out of range\n", max_frame); |
| return -EINVAL; |
| } |
| |
| /* |
| * For 82599EB we have to keep all PFs and VFs operating with |
| * the same max_frame value in order to avoid sending an oversize |
| * frame to a VF. In order to guarantee this is handled correctly |
| * for all cases we have several special exceptions to take into |
| * account before we can enable the VF for receive |
| */ |
| if (adapter->hw.mac.type == ixgbe_mac_82599EB) { |
| struct net_device *dev = adapter->netdev; |
| int pf_max_frame = dev->mtu + ETH_HLEN; |
| u32 reg_offset, vf_shift, vfre; |
| s32 err = 0; |
| |
| #ifdef CONFIG_FCOE |
| if (dev->features & NETIF_F_FCOE_MTU) |
| pf_max_frame = max_t(int, pf_max_frame, |
| IXGBE_FCOE_JUMBO_FRAME_SIZE); |
| |
| #endif /* CONFIG_FCOE */ |
| switch (adapter->vfinfo[vf].vf_api) { |
| case ixgbe_mbox_api_11: |
| case ixgbe_mbox_api_12: |
| case ixgbe_mbox_api_13: |
| case ixgbe_mbox_api_14: |
| /* Version 1.1 supports jumbo frames on VFs if PF has |
| * jumbo frames enabled which means legacy VFs are |
| * disabled |
| */ |
| if (pf_max_frame > ETH_FRAME_LEN) |
| break; |
| fallthrough; |
| default: |
| /* If the PF or VF are running w/ jumbo frames enabled |
| * we need to shut down the VF Rx path as we cannot |
| * support jumbo frames on legacy VFs |
| */ |
| if ((pf_max_frame > ETH_FRAME_LEN) || |
| (max_frame > (ETH_FRAME_LEN + ETH_FCS_LEN))) |
| err = -EINVAL; |
| break; |
| } |
| |
| /* determine VF receive enable location */ |
| vf_shift = vf % 32; |
| reg_offset = vf / 32; |
| |
| /* enable or disable receive depending on error */ |
| vfre = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset)); |
| if (err) |
| vfre &= ~BIT(vf_shift); |
| else |
| vfre |= BIT(vf_shift); |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), vfre); |
| |
| if (err) { |
| e_err(drv, "VF max_frame %d out of range\n", max_frame); |
| return err; |
| } |
| } |
| |
| /* pull current max frame size from hardware */ |
| max_frs = IXGBE_READ_REG(hw, IXGBE_MAXFRS); |
| max_frs &= IXGBE_MHADD_MFS_MASK; |
| max_frs >>= IXGBE_MHADD_MFS_SHIFT; |
| |
| if (max_frs < max_frame) { |
| max_frs = max_frame << IXGBE_MHADD_MFS_SHIFT; |
| IXGBE_WRITE_REG(hw, IXGBE_MAXFRS, max_frs); |
| } |
| |
| e_info(hw, "VF requests change max MTU to %d\n", max_frame); |
| |
| return 0; |
| } |
| |
| static void ixgbe_set_vmolr(struct ixgbe_hw *hw, u32 vf, bool aupe) |
| { |
| u32 vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf)); |
| vmolr |= IXGBE_VMOLR_BAM; |
| if (aupe) |
| vmolr |= IXGBE_VMOLR_AUPE; |
| else |
| vmolr &= ~IXGBE_VMOLR_AUPE; |
| IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr); |
| } |
| |
| static void ixgbe_clear_vmvir(struct ixgbe_adapter *adapter, u32 vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_VMVIR(vf), 0); |
| } |
| |
| static void ixgbe_clear_vf_vlans(struct ixgbe_adapter *adapter, u32 vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vlvfb_mask, pool_mask, i; |
| |
| /* create mask for VF and other pools */ |
| pool_mask = ~BIT(VMDQ_P(0) % 32); |
| vlvfb_mask = BIT(vf % 32); |
| |
| /* post increment loop, covers VLVF_ENTRIES - 1 to 0 */ |
| for (i = IXGBE_VLVF_ENTRIES; i--;) { |
| u32 bits[2], vlvfb, vid, vfta, vlvf; |
| u32 word = i * 2 + vf / 32; |
| u32 mask; |
| |
| vlvfb = IXGBE_READ_REG(hw, IXGBE_VLVFB(word)); |
| |
| /* if our bit isn't set we can skip it */ |
| if (!(vlvfb & vlvfb_mask)) |
| continue; |
| |
| /* clear our bit from vlvfb */ |
| vlvfb ^= vlvfb_mask; |
| |
| /* create 64b mask to chedk to see if we should clear VLVF */ |
| bits[word % 2] = vlvfb; |
| bits[~word % 2] = IXGBE_READ_REG(hw, IXGBE_VLVFB(word ^ 1)); |
| |
| /* if other pools are present, just remove ourselves */ |
| if (bits[(VMDQ_P(0) / 32) ^ 1] || |
| (bits[VMDQ_P(0) / 32] & pool_mask)) |
| goto update_vlvfb; |
| |
| /* if PF is present, leave VFTA */ |
| if (bits[0] || bits[1]) |
| goto update_vlvf; |
| |
| /* if we cannot determine VLAN just remove ourselves */ |
| vlvf = IXGBE_READ_REG(hw, IXGBE_VLVF(i)); |
| if (!vlvf) |
| goto update_vlvfb; |
| |
| vid = vlvf & VLAN_VID_MASK; |
| mask = BIT(vid % 32); |
| |
| /* clear bit from VFTA */ |
| vfta = IXGBE_READ_REG(hw, IXGBE_VFTA(vid / 32)); |
| if (vfta & mask) |
| IXGBE_WRITE_REG(hw, IXGBE_VFTA(vid / 32), vfta ^ mask); |
| update_vlvf: |
| /* clear POOL selection enable */ |
| IXGBE_WRITE_REG(hw, IXGBE_VLVF(i), 0); |
| |
| if (!(adapter->flags2 & IXGBE_FLAG2_VLAN_PROMISC)) |
| vlvfb = 0; |
| update_vlvfb: |
| /* clear pool bits */ |
| IXGBE_WRITE_REG(hw, IXGBE_VLVFB(word), vlvfb); |
| } |
| } |
| |
| static int ixgbe_set_vf_macvlan(struct ixgbe_adapter *adapter, |
| int vf, int index, unsigned char *mac_addr) |
| { |
| struct vf_macvlans *entry; |
| struct list_head *pos; |
| int retval = 0; |
| |
| if (index <= 1) { |
| list_for_each(pos, &adapter->vf_mvs.l) { |
| entry = list_entry(pos, struct vf_macvlans, l); |
| if (entry->vf == vf) { |
| entry->vf = -1; |
| entry->free = true; |
| entry->is_macvlan = false; |
| ixgbe_del_mac_filter(adapter, |
| entry->vf_macvlan, vf); |
| } |
| } |
| } |
| |
| /* |
| * If index was zero then we were asked to clear the uc list |
| * for the VF. We're done. |
| */ |
| if (!index) |
| return 0; |
| |
| entry = NULL; |
| |
| list_for_each(pos, &adapter->vf_mvs.l) { |
| entry = list_entry(pos, struct vf_macvlans, l); |
| if (entry->free) |
| break; |
| } |
| |
| /* |
| * If we traversed the entire list and didn't find a free entry |
| * then we're out of space on the RAR table. Also entry may |
| * be NULL because the original memory allocation for the list |
| * failed, which is not fatal but does mean we can't support |
| * VF requests for MACVLAN because we couldn't allocate |
| * memory for the list management required. |
| */ |
| if (!entry || !entry->free) |
| return -ENOSPC; |
| |
| retval = ixgbe_add_mac_filter(adapter, mac_addr, vf); |
| if (retval < 0) |
| return retval; |
| |
| entry->free = false; |
| entry->is_macvlan = true; |
| entry->vf = vf; |
| memcpy(entry->vf_macvlan, mac_addr, ETH_ALEN); |
| |
| return 0; |
| } |
| |
| static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; |
| struct vf_data_storage *vfinfo = &adapter->vfinfo[vf]; |
| u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask); |
| u8 num_tcs = adapter->hw_tcs; |
| u32 reg_val; |
| u32 queue; |
| |
| /* remove VLAN filters beloning to this VF */ |
| ixgbe_clear_vf_vlans(adapter, vf); |
| |
| /* add back PF assigned VLAN or VLAN 0 */ |
| ixgbe_set_vf_vlan(adapter, true, vfinfo->pf_vlan, vf); |
| |
| /* reset offloads to defaults */ |
| ixgbe_set_vmolr(hw, vf, !vfinfo->pf_vlan); |
| |
| /* set outgoing tags for VFs */ |
| if (!vfinfo->pf_vlan && !vfinfo->pf_qos && !num_tcs) { |
| ixgbe_clear_vmvir(adapter, vf); |
| } else { |
| if (vfinfo->pf_qos || !num_tcs) |
| ixgbe_set_vmvir(adapter, vfinfo->pf_vlan, |
| vfinfo->pf_qos, vf); |
| else |
| ixgbe_set_vmvir(adapter, vfinfo->pf_vlan, |
| adapter->default_up, vf); |
| |
| if (vfinfo->spoofchk_enabled) { |
| hw->mac.ops.set_vlan_anti_spoofing(hw, true, vf); |
| hw->mac.ops.set_mac_anti_spoofing(hw, true, vf); |
| } |
| } |
| |
| /* reset multicast table array for vf */ |
| adapter->vfinfo[vf].num_vf_mc_hashes = 0; |
| |
| /* clear any ipsec table info */ |
| ixgbe_ipsec_vf_clear(adapter, vf); |
| |
| /* Flush and reset the mta with the new values */ |
| ixgbe_set_rx_mode(adapter->netdev); |
| |
| ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf); |
| ixgbe_set_vf_macvlan(adapter, vf, 0, NULL); |
| |
| /* reset VF api back to unknown */ |
| adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10; |
| |
| /* Restart each queue for given VF */ |
| for (queue = 0; queue < q_per_pool; queue++) { |
| unsigned int reg_idx = (vf * q_per_pool) + queue; |
| |
| reg_val = IXGBE_READ_REG(hw, IXGBE_PVFTXDCTL(reg_idx)); |
| |
| /* Re-enabling only configured queues */ |
| if (reg_val) { |
| reg_val |= IXGBE_TXDCTL_ENABLE; |
| IXGBE_WRITE_REG(hw, IXGBE_PVFTXDCTL(reg_idx), reg_val); |
| reg_val &= ~IXGBE_TXDCTL_ENABLE; |
| IXGBE_WRITE_REG(hw, IXGBE_PVFTXDCTL(reg_idx), reg_val); |
| } |
| } |
| |
| IXGBE_WRITE_FLUSH(hw); |
| } |
| |
| static void ixgbe_vf_clear_mbx(struct ixgbe_adapter *adapter, u32 vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 word; |
| |
| /* Clear VF's mailbox memory */ |
| for (word = 0; word < IXGBE_VFMAILBOX_SIZE; word++) |
| IXGBE_WRITE_REG_ARRAY(hw, IXGBE_PFMBMEM(vf), word, 0); |
| |
| IXGBE_WRITE_FLUSH(hw); |
| } |
| |
| static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter, |
| int vf, unsigned char *mac_addr) |
| { |
| s32 retval; |
| |
| ixgbe_del_mac_filter(adapter, adapter->vfinfo[vf].vf_mac_addresses, vf); |
| retval = ixgbe_add_mac_filter(adapter, mac_addr, vf); |
| if (retval >= 0) |
| memcpy(adapter->vfinfo[vf].vf_mac_addresses, mac_addr, |
| ETH_ALEN); |
| else |
| eth_zero_addr(adapter->vfinfo[vf].vf_mac_addresses); |
| |
| return retval; |
| } |
| |
| int ixgbe_vf_configuration(struct pci_dev *pdev, unsigned int event_mask) |
| { |
| struct ixgbe_adapter *adapter = pci_get_drvdata(pdev); |
| unsigned int vfn = (event_mask & 0x3f); |
| |
| bool enable = ((event_mask & 0x10000000U) != 0); |
| |
| if (enable) |
| eth_zero_addr(adapter->vfinfo[vfn].vf_mac_addresses); |
| |
| return 0; |
| } |
| |
| static inline void ixgbe_write_qde(struct ixgbe_adapter *adapter, u32 vf, |
| u32 qde) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; |
| u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask); |
| int i; |
| |
| for (i = vf * q_per_pool; i < ((vf + 1) * q_per_pool); i++) { |
| u32 reg; |
| |
| /* flush previous write */ |
| IXGBE_WRITE_FLUSH(hw); |
| |
| /* indicate to hardware that we want to set drop enable */ |
| reg = IXGBE_QDE_WRITE | qde; |
| reg |= i << IXGBE_QDE_IDX_SHIFT; |
| IXGBE_WRITE_REG(hw, IXGBE_QDE, reg); |
| } |
| } |
| |
| static int ixgbe_vf_reset_msg(struct ixgbe_adapter *adapter, u32 vf) |
| { |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| unsigned char *vf_mac = adapter->vfinfo[vf].vf_mac_addresses; |
| u32 reg, reg_offset, vf_shift; |
| u32 msgbuf[4] = {0, 0, 0, 0}; |
| u8 *addr = (u8 *)(&msgbuf[1]); |
| u32 q_per_pool = __ALIGN_MASK(1, ~vmdq->mask); |
| int i; |
| |
| e_info(probe, "VF Reset msg received from vf %d\n", vf); |
| |
| /* reset the filters for the device */ |
| ixgbe_vf_reset_event(adapter, vf); |
| |
| ixgbe_vf_clear_mbx(adapter, vf); |
| |
| /* set vf mac address */ |
| if (!is_zero_ether_addr(vf_mac)) |
| ixgbe_set_vf_mac(adapter, vf, vf_mac); |
| |
| vf_shift = vf % 32; |
| reg_offset = vf / 32; |
| |
| /* enable transmit for vf */ |
| reg = IXGBE_READ_REG(hw, IXGBE_VFTE(reg_offset)); |
| reg |= BIT(vf_shift); |
| IXGBE_WRITE_REG(hw, IXGBE_VFTE(reg_offset), reg); |
| |
| /* force drop enable for all VF Rx queues */ |
| reg = IXGBE_QDE_ENABLE; |
| if (adapter->vfinfo[vf].pf_vlan) |
| reg |= IXGBE_QDE_HIDE_VLAN; |
| |
| ixgbe_write_qde(adapter, vf, reg); |
| |
| /* enable receive for vf */ |
| reg = IXGBE_READ_REG(hw, IXGBE_VFRE(reg_offset)); |
| reg |= BIT(vf_shift); |
| /* |
| * The 82599 cannot support a mix of jumbo and non-jumbo PF/VFs. |
| * For more info take a look at ixgbe_set_vf_lpe |
| */ |
| if (adapter->hw.mac.type == ixgbe_mac_82599EB) { |
| struct net_device *dev = adapter->netdev; |
| int pf_max_frame = dev->mtu + ETH_HLEN; |
| |
| #ifdef CONFIG_FCOE |
| if (dev->features & NETIF_F_FCOE_MTU) |
| pf_max_frame = max_t(int, pf_max_frame, |
| IXGBE_FCOE_JUMBO_FRAME_SIZE); |
| |
| #endif /* CONFIG_FCOE */ |
| if (pf_max_frame > ETH_FRAME_LEN) |
| reg &= ~BIT(vf_shift); |
| } |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(reg_offset), reg); |
| |
| /* enable VF mailbox for further messages */ |
| adapter->vfinfo[vf].clear_to_send = true; |
| |
| /* Enable counting of spoofed packets in the SSVPC register */ |
| reg = IXGBE_READ_REG(hw, IXGBE_VMECM(reg_offset)); |
| reg |= BIT(vf_shift); |
| IXGBE_WRITE_REG(hw, IXGBE_VMECM(reg_offset), reg); |
| |
| /* |
| * Reset the VFs TDWBAL and TDWBAH registers |
| * which are not cleared by an FLR |
| */ |
| for (i = 0; i < q_per_pool; i++) { |
| IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBAHn(q_per_pool, vf, i), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_PVFTDWBALn(q_per_pool, vf, i), 0); |
| } |
| |
| /* reply to reset with ack and vf mac address */ |
| msgbuf[0] = IXGBE_VF_RESET; |
| if (!is_zero_ether_addr(vf_mac) && adapter->vfinfo[vf].pf_set_mac) { |
| msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK; |
| memcpy(addr, vf_mac, ETH_ALEN); |
| } else { |
| msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK; |
| } |
| |
| /* |
| * Piggyback the multicast filter type so VF can compute the |
| * correct vectors |
| */ |
| msgbuf[3] = hw->mac.mc_filter_type; |
| ixgbe_write_mbx(hw, msgbuf, IXGBE_VF_PERMADDR_MSG_LEN, vf); |
| |
| return 0; |
| } |
| |
| static int ixgbe_set_vf_mac_addr(struct ixgbe_adapter *adapter, |
| u32 *msgbuf, u32 vf) |
| { |
| u8 *new_mac = ((u8 *)(&msgbuf[1])); |
| |
| if (!is_valid_ether_addr(new_mac)) { |
| e_warn(drv, "VF %d attempted to set invalid mac\n", vf); |
| return -1; |
| } |
| |
| if (adapter->vfinfo[vf].pf_set_mac && !adapter->vfinfo[vf].trusted && |
| !ether_addr_equal(adapter->vfinfo[vf].vf_mac_addresses, new_mac)) { |
| e_warn(drv, |
| "VF %d attempted to override administratively set MAC address\n" |
| "Reload the VF driver to resume operations\n", |
| vf); |
| return -1; |
| } |
| |
| return ixgbe_set_vf_mac(adapter, vf, new_mac) < 0; |
| } |
| |
| static int ixgbe_set_vf_vlan_msg(struct ixgbe_adapter *adapter, |
| u32 *msgbuf, u32 vf) |
| { |
| u32 add = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> IXGBE_VT_MSGINFO_SHIFT; |
| u32 vid = (msgbuf[1] & IXGBE_VLVF_VLANID_MASK); |
| u8 tcs = adapter->hw_tcs; |
| |
| if (adapter->vfinfo[vf].pf_vlan || tcs) { |
| e_warn(drv, |
| "VF %d attempted to override administratively set VLAN configuration\n" |
| "Reload the VF driver to resume operations\n", |
| vf); |
| return -1; |
| } |
| |
| /* VLAN 0 is a special case, don't allow it to be removed */ |
| if (!vid && !add) |
| return 0; |
| |
| return ixgbe_set_vf_vlan(adapter, add, vid, vf); |
| } |
| |
| static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter, |
| u32 *msgbuf, u32 vf) |
| { |
| u8 *new_mac = ((u8 *)(&msgbuf[1])); |
| int index = (msgbuf[0] & IXGBE_VT_MSGINFO_MASK) >> |
| IXGBE_VT_MSGINFO_SHIFT; |
| int err; |
| |
| if (adapter->vfinfo[vf].pf_set_mac && !adapter->vfinfo[vf].trusted && |
| index > 0) { |
| e_warn(drv, |
| "VF %d requested MACVLAN filter but is administratively denied\n", |
| vf); |
| return -1; |
| } |
| |
| /* An non-zero index indicates the VF is setting a filter */ |
| if (index) { |
| if (!is_valid_ether_addr(new_mac)) { |
| e_warn(drv, "VF %d attempted to set invalid mac\n", vf); |
| return -1; |
| } |
| |
| /* |
| * If the VF is allowed to set MAC filters then turn off |
| * anti-spoofing to avoid false positives. |
| */ |
| if (adapter->vfinfo[vf].spoofchk_enabled) { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| hw->mac.ops.set_mac_anti_spoofing(hw, false, vf); |
| hw->mac.ops.set_vlan_anti_spoofing(hw, false, vf); |
| } |
| } |
| |
| err = ixgbe_set_vf_macvlan(adapter, vf, index, new_mac); |
| if (err == -ENOSPC) |
| e_warn(drv, |
| "VF %d has requested a MACVLAN filter but there is no space for it\n", |
| vf); |
| |
| return err < 0; |
| } |
| |
| static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter, |
| u32 *msgbuf, u32 vf) |
| { |
| int api = msgbuf[1]; |
| |
| switch (api) { |
| case ixgbe_mbox_api_10: |
| case ixgbe_mbox_api_11: |
| case ixgbe_mbox_api_12: |
| case ixgbe_mbox_api_13: |
| case ixgbe_mbox_api_14: |
| adapter->vfinfo[vf].vf_api = api; |
| return 0; |
| default: |
| break; |
| } |
| |
| e_info(drv, "VF %d requested invalid api version %u\n", vf, api); |
| |
| return -1; |
| } |
| |
| static int ixgbe_get_vf_queues(struct ixgbe_adapter *adapter, |
| u32 *msgbuf, u32 vf) |
| { |
| struct net_device *dev = adapter->netdev; |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; |
| unsigned int default_tc = 0; |
| u8 num_tcs = adapter->hw_tcs; |
| |
| /* verify the PF is supporting the correct APIs */ |
| switch (adapter->vfinfo[vf].vf_api) { |
| case ixgbe_mbox_api_20: |
| case ixgbe_mbox_api_11: |
| case ixgbe_mbox_api_12: |
| case ixgbe_mbox_api_13: |
| case ixgbe_mbox_api_14: |
| break; |
| default: |
| return -1; |
| } |
| |
| /* only allow 1 Tx queue for bandwidth limiting */ |
| msgbuf[IXGBE_VF_TX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask); |
| msgbuf[IXGBE_VF_RX_QUEUES] = __ALIGN_MASK(1, ~vmdq->mask); |
| |
| /* if TCs > 1 determine which TC belongs to default user priority */ |
| if (num_tcs > 1) |
| default_tc = netdev_get_prio_tc_map(dev, adapter->default_up); |
| |
| /* notify VF of need for VLAN tag stripping, and correct queue */ |
| if (num_tcs) |
| msgbuf[IXGBE_VF_TRANS_VLAN] = num_tcs; |
| else if (adapter->vfinfo[vf].pf_vlan || adapter->vfinfo[vf].pf_qos) |
| msgbuf[IXGBE_VF_TRANS_VLAN] = 1; |
| else |
| msgbuf[IXGBE_VF_TRANS_VLAN] = 0; |
| |
| /* notify VF of default queue */ |
| msgbuf[IXGBE_VF_DEF_QUEUE] = default_tc; |
| |
| return 0; |
| } |
| |
| static int ixgbe_get_vf_reta(struct ixgbe_adapter *adapter, u32 *msgbuf, u32 vf) |
| { |
| u32 i, j; |
| u32 *out_buf = &msgbuf[1]; |
| const u8 *reta = adapter->rss_indir_tbl; |
| u32 reta_size = ixgbe_rss_indir_tbl_entries(adapter); |
| |
| /* Check if operation is permitted */ |
| if (!adapter->vfinfo[vf].rss_query_enabled) |
| return -EPERM; |
| |
| /* verify the PF is supporting the correct API */ |
| switch (adapter->vfinfo[vf].vf_api) { |
| case ixgbe_mbox_api_14: |
| case ixgbe_mbox_api_13: |
| case ixgbe_mbox_api_12: |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| /* This mailbox command is supported (required) only for 82599 and x540 |
| * VFs which support up to 4 RSS queues. Therefore we will compress the |
| * RETA by saving only 2 bits from each entry. This way we will be able |
| * to transfer the whole RETA in a single mailbox operation. |
| */ |
| for (i = 0; i < reta_size / 16; i++) { |
| out_buf[i] = 0; |
| for (j = 0; j < 16; j++) |
| out_buf[i] |= (u32)(reta[16 * i + j] & 0x3) << (2 * j); |
| } |
| |
| return 0; |
| } |
| |
| static int ixgbe_get_vf_rss_key(struct ixgbe_adapter *adapter, |
| u32 *msgbuf, u32 vf) |
| { |
| u32 *rss_key = &msgbuf[1]; |
| |
| /* Check if the operation is permitted */ |
| if (!adapter->vfinfo[vf].rss_query_enabled) |
| return -EPERM; |
| |
| /* verify the PF is supporting the correct API */ |
| switch (adapter->vfinfo[vf].vf_api) { |
| case ixgbe_mbox_api_14: |
| case ixgbe_mbox_api_13: |
| case ixgbe_mbox_api_12: |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| memcpy(rss_key, adapter->rss_key, IXGBE_RSS_KEY_SIZE); |
| |
| return 0; |
| } |
| |
| static int ixgbe_update_vf_xcast_mode(struct ixgbe_adapter *adapter, |
| u32 *msgbuf, u32 vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int xcast_mode = msgbuf[1]; |
| u32 vmolr, fctrl, disable, enable; |
| |
| /* verify the PF is supporting the correct APIs */ |
| switch (adapter->vfinfo[vf].vf_api) { |
| case ixgbe_mbox_api_12: |
| /* promisc introduced in 1.3 version */ |
| if (xcast_mode == IXGBEVF_XCAST_MODE_PROMISC) |
| return -EOPNOTSUPP; |
| fallthrough; |
| case ixgbe_mbox_api_13: |
| case ixgbe_mbox_api_14: |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| if (xcast_mode > IXGBEVF_XCAST_MODE_MULTI && |
| !adapter->vfinfo[vf].trusted) { |
| xcast_mode = IXGBEVF_XCAST_MODE_MULTI; |
| } |
| |
| if (adapter->vfinfo[vf].xcast_mode == xcast_mode) |
| goto out; |
| |
| switch (xcast_mode) { |
| case IXGBEVF_XCAST_MODE_NONE: |
| disable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | |
| IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE; |
| enable = 0; |
| break; |
| case IXGBEVF_XCAST_MODE_MULTI: |
| disable = IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE; |
| enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE; |
| break; |
| case IXGBEVF_XCAST_MODE_ALLMULTI: |
| disable = IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE; |
| enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | IXGBE_VMOLR_MPE; |
| break; |
| case IXGBEVF_XCAST_MODE_PROMISC: |
| if (hw->mac.type <= ixgbe_mac_82599EB) |
| return -EOPNOTSUPP; |
| |
| fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL); |
| if (!(fctrl & IXGBE_FCTRL_UPE)) { |
| /* VF promisc requires PF in promisc */ |
| e_warn(drv, |
| "Enabling VF promisc requires PF in promisc\n"); |
| return -EPERM; |
| } |
| |
| disable = 0; |
| enable = IXGBE_VMOLR_BAM | IXGBE_VMOLR_ROMPE | |
| IXGBE_VMOLR_MPE | IXGBE_VMOLR_UPE | IXGBE_VMOLR_VPE; |
| break; |
| default: |
| return -EOPNOTSUPP; |
| } |
| |
| vmolr = IXGBE_READ_REG(hw, IXGBE_VMOLR(vf)); |
| vmolr &= ~disable; |
| vmolr |= enable; |
| IXGBE_WRITE_REG(hw, IXGBE_VMOLR(vf), vmolr); |
| |
| adapter->vfinfo[vf].xcast_mode = xcast_mode; |
| |
| out: |
| msgbuf[1] = xcast_mode; |
| |
| return 0; |
| } |
| |
| static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf) |
| { |
| u32 mbx_size = IXGBE_VFMAILBOX_SIZE; |
| u32 msgbuf[IXGBE_VFMAILBOX_SIZE]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| s32 retval; |
| |
| retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf); |
| |
| if (retval) { |
| pr_err("Error receiving message from VF\n"); |
| return retval; |
| } |
| |
| /* this is a message we already processed, do nothing */ |
| if (msgbuf[0] & (IXGBE_VT_MSGTYPE_ACK | IXGBE_VT_MSGTYPE_NACK)) |
| return 0; |
| |
| /* flush the ack before we write any messages back */ |
| IXGBE_WRITE_FLUSH(hw); |
| |
| if (msgbuf[0] == IXGBE_VF_RESET) |
| return ixgbe_vf_reset_msg(adapter, vf); |
| |
| /* |
| * until the vf completes a virtual function reset it should not be |
| * allowed to start any configuration. |
| */ |
| if (!adapter->vfinfo[vf].clear_to_send) { |
| msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK; |
| ixgbe_write_mbx(hw, msgbuf, 1, vf); |
| return 0; |
| } |
| |
| switch ((msgbuf[0] & 0xFFFF)) { |
| case IXGBE_VF_SET_MAC_ADDR: |
| retval = ixgbe_set_vf_mac_addr(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_SET_MULTICAST: |
| retval = ixgbe_set_vf_multicasts(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_SET_VLAN: |
| retval = ixgbe_set_vf_vlan_msg(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_SET_LPE: |
| retval = ixgbe_set_vf_lpe(adapter, msgbuf[1], vf); |
| break; |
| case IXGBE_VF_SET_MACVLAN: |
| retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_API_NEGOTIATE: |
| retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_GET_QUEUES: |
| retval = ixgbe_get_vf_queues(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_GET_RETA: |
| retval = ixgbe_get_vf_reta(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_GET_RSS_KEY: |
| retval = ixgbe_get_vf_rss_key(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_UPDATE_XCAST_MODE: |
| retval = ixgbe_update_vf_xcast_mode(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_IPSEC_ADD: |
| retval = ixgbe_ipsec_vf_add_sa(adapter, msgbuf, vf); |
| break; |
| case IXGBE_VF_IPSEC_DEL: |
| retval = ixgbe_ipsec_vf_del_sa(adapter, msgbuf, vf); |
| break; |
| default: |
| e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]); |
| retval = IXGBE_ERR_MBX; |
| break; |
| } |
| |
| /* notify the VF of the results of what it sent us */ |
| if (retval) |
| msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK; |
| else |
| msgbuf[0] |= IXGBE_VT_MSGTYPE_ACK; |
| |
| msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS; |
| |
| ixgbe_write_mbx(hw, msgbuf, mbx_size, vf); |
| |
| return retval; |
| } |
| |
| static void ixgbe_rcv_ack_from_vf(struct ixgbe_adapter *adapter, u32 vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 msg = IXGBE_VT_MSGTYPE_NACK; |
| |
| /* if device isn't clear to send it shouldn't be reading either */ |
| if (!adapter->vfinfo[vf].clear_to_send) |
| ixgbe_write_mbx(hw, &msg, 1, vf); |
| } |
| |
| void ixgbe_msg_task(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 vf; |
| |
| for (vf = 0; vf < adapter->num_vfs; vf++) { |
| /* process any reset requests */ |
| if (!ixgbe_check_for_rst(hw, vf)) |
| ixgbe_vf_reset_event(adapter, vf); |
| |
| /* process any messages pending */ |
| if (!ixgbe_check_for_msg(hw, vf)) |
| ixgbe_rcv_msg_from_vf(adapter, vf); |
| |
| /* process any acks */ |
| if (!ixgbe_check_for_ack(hw, vf)) |
| ixgbe_rcv_ack_from_vf(adapter, vf); |
| } |
| } |
| |
| void ixgbe_disable_tx_rx(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| /* disable transmit and receive for all vfs */ |
| IXGBE_WRITE_REG(hw, IXGBE_VFTE(0), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_VFTE(1), 0); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(0), 0); |
| IXGBE_WRITE_REG(hw, IXGBE_VFRE(1), 0); |
| } |
| |
| static inline void ixgbe_ping_vf(struct ixgbe_adapter *adapter, int vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 ping; |
| |
| ping = IXGBE_PF_CONTROL_MSG; |
| if (adapter->vfinfo[vf].clear_to_send) |
| ping |= IXGBE_VT_MSGTYPE_CTS; |
| ixgbe_write_mbx(hw, &ping, 1, vf); |
| } |
| |
| void ixgbe_ping_all_vfs(struct ixgbe_adapter *adapter) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 ping; |
| int i; |
| |
| for (i = 0 ; i < adapter->num_vfs; i++) { |
| ping = IXGBE_PF_CONTROL_MSG; |
| if (adapter->vfinfo[i].clear_to_send) |
| ping |= IXGBE_VT_MSGTYPE_CTS; |
| ixgbe_write_mbx(hw, &ping, 1, i); |
| } |
| } |
| |
| int ixgbe_ndo_set_vf_mac(struct net_device *netdev, int vf, u8 *mac) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| s32 retval; |
| |
| if (vf >= adapter->num_vfs) |
| return -EINVAL; |
| |
| if (is_valid_ether_addr(mac)) { |
| dev_info(&adapter->pdev->dev, "setting MAC %pM on VF %d\n", |
| mac, vf); |
| dev_info(&adapter->pdev->dev, "Reload the VF driver to make this change effective."); |
| |
| retval = ixgbe_set_vf_mac(adapter, vf, mac); |
| if (retval >= 0) { |
| adapter->vfinfo[vf].pf_set_mac = true; |
| |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) { |
| dev_warn(&adapter->pdev->dev, "The VF MAC address has been set, but the PF device is not up.\n"); |
| dev_warn(&adapter->pdev->dev, "Bring the PF device up before attempting to use the VF device.\n"); |
| } |
| } else { |
| dev_warn(&adapter->pdev->dev, "The VF MAC address was NOT set due to invalid or duplicate MAC address.\n"); |
| } |
| } else if (is_zero_ether_addr(mac)) { |
| unsigned char *vf_mac_addr = |
| adapter->vfinfo[vf].vf_mac_addresses; |
| |
| /* nothing to do */ |
| if (is_zero_ether_addr(vf_mac_addr)) |
| return 0; |
| |
| dev_info(&adapter->pdev->dev, "removing MAC on VF %d\n", vf); |
| |
| retval = ixgbe_del_mac_filter(adapter, vf_mac_addr, vf); |
| if (retval >= 0) { |
| adapter->vfinfo[vf].pf_set_mac = false; |
| memcpy(vf_mac_addr, mac, ETH_ALEN); |
| } else { |
| dev_warn(&adapter->pdev->dev, "Could NOT remove the VF MAC address.\n"); |
| } |
| } else { |
| retval = -EINVAL; |
| } |
| |
| return retval; |
| } |
| |
| static int ixgbe_enable_port_vlan(struct ixgbe_adapter *adapter, int vf, |
| u16 vlan, u8 qos) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int err; |
| |
| err = ixgbe_set_vf_vlan(adapter, true, vlan, vf); |
| if (err) |
| goto out; |
| |
| /* Revoke tagless access via VLAN 0 */ |
| ixgbe_set_vf_vlan(adapter, false, 0, vf); |
| |
| ixgbe_set_vmvir(adapter, vlan, qos, vf); |
| ixgbe_set_vmolr(hw, vf, false); |
| |
| /* enable hide vlan on X550 */ |
| if (hw->mac.type >= ixgbe_mac_X550) |
| ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE | |
| IXGBE_QDE_HIDE_VLAN); |
| |
| adapter->vfinfo[vf].pf_vlan = vlan; |
| adapter->vfinfo[vf].pf_qos = qos; |
| dev_info(&adapter->pdev->dev, |
| "Setting VLAN %d, QOS 0x%x on VF %d\n", vlan, qos, vf); |
| if (test_bit(__IXGBE_DOWN, &adapter->state)) { |
| dev_warn(&adapter->pdev->dev, |
| "The VF VLAN has been set, but the PF device is not up.\n"); |
| dev_warn(&adapter->pdev->dev, |
| "Bring the PF device up before attempting to use the VF device.\n"); |
| } |
| |
| out: |
| return err; |
| } |
| |
| static int ixgbe_disable_port_vlan(struct ixgbe_adapter *adapter, int vf) |
| { |
| struct ixgbe_hw *hw = &adapter->hw; |
| int err; |
| |
| err = ixgbe_set_vf_vlan(adapter, false, |
| adapter->vfinfo[vf].pf_vlan, vf); |
| /* Restore tagless access via VLAN 0 */ |
| ixgbe_set_vf_vlan(adapter, true, 0, vf); |
| ixgbe_clear_vmvir(adapter, vf); |
| ixgbe_set_vmolr(hw, vf, true); |
| |
| /* disable hide VLAN on X550 */ |
| if (hw->mac.type >= ixgbe_mac_X550) |
| ixgbe_write_qde(adapter, vf, IXGBE_QDE_ENABLE); |
| |
| adapter->vfinfo[vf].pf_vlan = 0; |
| adapter->vfinfo[vf].pf_qos = 0; |
| |
| return err; |
| } |
| |
| int ixgbe_ndo_set_vf_vlan(struct net_device *netdev, int vf, u16 vlan, |
| u8 qos, __be16 vlan_proto) |
| { |
| int err = 0; |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| if ((vf >= adapter->num_vfs) || (vlan > 4095) || (qos > 7)) |
| return -EINVAL; |
| if (vlan_proto != htons(ETH_P_8021Q)) |
| return -EPROTONOSUPPORT; |
| if (vlan || qos) { |
| /* Check if there is already a port VLAN set, if so |
| * we have to delete the old one first before we |
| * can set the new one. The usage model had |
| * previously assumed the user would delete the |
| * old port VLAN before setting a new one but this |
| * is not necessarily the case. |
| */ |
| if (adapter->vfinfo[vf].pf_vlan) |
| err = ixgbe_disable_port_vlan(adapter, vf); |
| if (err) |
| goto out; |
| err = ixgbe_enable_port_vlan(adapter, vf, vlan, qos); |
| } else { |
| err = ixgbe_disable_port_vlan(adapter, vf); |
| } |
| |
| out: |
| return err; |
| } |
| |
| int ixgbe_link_mbps(struct ixgbe_adapter *adapter) |
| { |
| switch (adapter->link_speed) { |
| case IXGBE_LINK_SPEED_100_FULL: |
| return 100; |
| case IXGBE_LINK_SPEED_1GB_FULL: |
| return 1000; |
| case IXGBE_LINK_SPEED_10GB_FULL: |
| return 10000; |
| default: |
| return 0; |
| } |
| } |
| |
| static void ixgbe_set_vf_rate_limit(struct ixgbe_adapter *adapter, int vf) |
| { |
| struct ixgbe_ring_feature *vmdq = &adapter->ring_feature[RING_F_VMDQ]; |
| struct ixgbe_hw *hw = &adapter->hw; |
| u32 bcnrc_val = 0; |
| u16 queue, queues_per_pool; |
| u16 tx_rate = adapter->vfinfo[vf].tx_rate; |
| |
| if (tx_rate) { |
| /* start with base link speed value */ |
| bcnrc_val = adapter->vf_rate_link_speed; |
| |
| /* Calculate the rate factor values to set */ |
| bcnrc_val <<= IXGBE_RTTBCNRC_RF_INT_SHIFT; |
| bcnrc_val /= tx_rate; |
| |
| /* clear everything but the rate factor */ |
| bcnrc_val &= IXGBE_RTTBCNRC_RF_INT_MASK | |
| IXGBE_RTTBCNRC_RF_DEC_MASK; |
| |
| /* enable the rate scheduler */ |
| bcnrc_val |= IXGBE_RTTBCNRC_RS_ENA; |
| } |
| |
| /* |
| * Set global transmit compensation time to the MMW_SIZE in RTTBCNRM |
| * register. Typically MMW_SIZE=0x014 if 9728-byte jumbo is supported |
| * and 0x004 otherwise. |
| */ |
| switch (hw->mac.type) { |
| case ixgbe_mac_82599EB: |
| IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x4); |
| break; |
| case ixgbe_mac_X540: |
| IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRM, 0x14); |
| break; |
| default: |
| break; |
| } |
| |
| /* determine how many queues per pool based on VMDq mask */ |
| queues_per_pool = __ALIGN_MASK(1, ~vmdq->mask); |
| |
| /* write value for all Tx queues belonging to VF */ |
| for (queue = 0; queue < queues_per_pool; queue++) { |
| unsigned int reg_idx = (vf * queues_per_pool) + queue; |
| |
| IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, reg_idx); |
| IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, bcnrc_val); |
| } |
| } |
| |
| void ixgbe_check_vf_rate_limit(struct ixgbe_adapter *adapter) |
| { |
| int i; |
| |
| /* VF Tx rate limit was not set */ |
| if (!adapter->vf_rate_link_speed) |
| return; |
| |
| if (ixgbe_link_mbps(adapter) != adapter->vf_rate_link_speed) { |
| adapter->vf_rate_link_speed = 0; |
| dev_info(&adapter->pdev->dev, |
| "Link speed has been changed. VF Transmit rate is disabled\n"); |
| } |
| |
| for (i = 0; i < adapter->num_vfs; i++) { |
| if (!adapter->vf_rate_link_speed) |
| adapter->vfinfo[i].tx_rate = 0; |
| |
| ixgbe_set_vf_rate_limit(adapter, i); |
| } |
| } |
| |
| int ixgbe_ndo_set_vf_bw(struct net_device *netdev, int vf, int min_tx_rate, |
| int max_tx_rate) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| int link_speed; |
| |
| /* verify VF is active */ |
| if (vf >= adapter->num_vfs) |
| return -EINVAL; |
| |
| /* verify link is up */ |
| if (!adapter->link_up) |
| return -EINVAL; |
| |
| /* verify we are linked at 10Gbps */ |
| link_speed = ixgbe_link_mbps(adapter); |
| if (link_speed != 10000) |
| return -EINVAL; |
| |
| if (min_tx_rate) |
| return -EINVAL; |
| |
| /* rate limit cannot be less than 10Mbs or greater than link speed */ |
| if (max_tx_rate && ((max_tx_rate <= 10) || (max_tx_rate > link_speed))) |
| return -EINVAL; |
| |
| /* store values */ |
| adapter->vf_rate_link_speed = link_speed; |
| adapter->vfinfo[vf].tx_rate = max_tx_rate; |
| |
| /* update hardware configuration */ |
| ixgbe_set_vf_rate_limit(adapter, vf); |
| |
| return 0; |
| } |
| |
| int ixgbe_ndo_set_vf_spoofchk(struct net_device *netdev, int vf, bool setting) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| struct ixgbe_hw *hw = &adapter->hw; |
| |
| if (vf >= adapter->num_vfs) |
| return -EINVAL; |
| |
| adapter->vfinfo[vf].spoofchk_enabled = setting; |
| |
| /* configure MAC spoofing */ |
| hw->mac.ops.set_mac_anti_spoofing(hw, setting, vf); |
| |
| /* configure VLAN spoofing */ |
| hw->mac.ops.set_vlan_anti_spoofing(hw, setting, vf); |
| |
| /* Ensure LLDP and FC is set for Ethertype Antispoofing if we will be |
| * calling set_ethertype_anti_spoofing for each VF in loop below |
| */ |
| if (hw->mac.ops.set_ethertype_anti_spoofing) { |
| IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_LLDP), |
| (IXGBE_ETQF_FILTER_EN | |
| IXGBE_ETQF_TX_ANTISPOOF | |
| ETH_P_LLDP)); |
| |
| IXGBE_WRITE_REG(hw, IXGBE_ETQF(IXGBE_ETQF_FILTER_FC), |
| (IXGBE_ETQF_FILTER_EN | |
| IXGBE_ETQF_TX_ANTISPOOF | |
| ETH_P_PAUSE)); |
| |
| hw->mac.ops.set_ethertype_anti_spoofing(hw, setting, vf); |
| } |
| |
| return 0; |
| } |
| |
| int ixgbe_ndo_set_vf_rss_query_en(struct net_device *netdev, int vf, |
| bool setting) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| /* This operation is currently supported only for 82599 and x540 |
| * devices. |
| */ |
| if (adapter->hw.mac.type < ixgbe_mac_82599EB || |
| adapter->hw.mac.type >= ixgbe_mac_X550) |
| return -EOPNOTSUPP; |
| |
| if (vf >= adapter->num_vfs) |
| return -EINVAL; |
| |
| adapter->vfinfo[vf].rss_query_enabled = setting; |
| |
| return 0; |
| } |
| |
| int ixgbe_ndo_set_vf_trust(struct net_device *netdev, int vf, bool setting) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| |
| if (vf >= adapter->num_vfs) |
| return -EINVAL; |
| |
| /* nothing to do */ |
| if (adapter->vfinfo[vf].trusted == setting) |
| return 0; |
| |
| adapter->vfinfo[vf].trusted = setting; |
| |
| /* reset VF to reconfigure features */ |
| adapter->vfinfo[vf].clear_to_send = false; |
| ixgbe_ping_vf(adapter, vf); |
| |
| e_info(drv, "VF %u is %strusted\n", vf, setting ? "" : "not "); |
| |
| return 0; |
| } |
| |
| int ixgbe_ndo_get_vf_config(struct net_device *netdev, |
| int vf, struct ifla_vf_info *ivi) |
| { |
| struct ixgbe_adapter *adapter = netdev_priv(netdev); |
| if (vf >= adapter->num_vfs) |
| return -EINVAL; |
| ivi->vf = vf; |
| memcpy(&ivi->mac, adapter->vfinfo[vf].vf_mac_addresses, ETH_ALEN); |
| ivi->max_tx_rate = adapter->vfinfo[vf].tx_rate; |
| ivi->min_tx_rate = 0; |
| ivi->vlan = adapter->vfinfo[vf].pf_vlan; |
| ivi->qos = adapter->vfinfo[vf].pf_qos; |
| ivi->spoofchk = adapter->vfinfo[vf].spoofchk_enabled; |
| ivi->rss_query_en = adapter->vfinfo[vf].rss_query_enabled; |
| ivi->trusted = adapter->vfinfo[vf].trusted; |
| return 0; |
| } |