| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright (c) 2018, Intel Corporation. */ |
| |
| /* This provides a net_failover interface for paravirtual drivers to |
| * provide an alternate datapath by exporting APIs to create and |
| * destroy a upper 'net_failover' netdev. The upper dev manages the |
| * original paravirtual interface as a 'standby' netdev and uses the |
| * generic failover infrastructure to register and manage a direct |
| * attached VF as a 'primary' netdev. This enables live migration of |
| * a VM with direct attached VF by failing over to the paravirtual |
| * datapath when the VF is unplugged. |
| * |
| * Some of the netdev management routines are based on bond/team driver as |
| * this driver provides active-backup functionality similar to those drivers. |
| */ |
| |
| #include <linux/netdevice.h> |
| #include <linux/etherdevice.h> |
| #include <linux/ethtool.h> |
| #include <linux/module.h> |
| #include <linux/slab.h> |
| #include <linux/netpoll.h> |
| #include <linux/rtnetlink.h> |
| #include <linux/if_vlan.h> |
| #include <linux/pci.h> |
| #include <net/sch_generic.h> |
| #include <uapi/linux/if_arp.h> |
| #include <net/net_failover.h> |
| |
| static bool net_failover_xmit_ready(struct net_device *dev) |
| { |
| return netif_running(dev) && netif_carrier_ok(dev); |
| } |
| |
| static int net_failover_open(struct net_device *dev) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *primary_dev, *standby_dev; |
| int err; |
| |
| primary_dev = rtnl_dereference(nfo_info->primary_dev); |
| if (primary_dev) { |
| err = dev_open(primary_dev, NULL); |
| if (err) |
| goto err_primary_open; |
| } |
| |
| standby_dev = rtnl_dereference(nfo_info->standby_dev); |
| if (standby_dev) { |
| err = dev_open(standby_dev, NULL); |
| if (err) |
| goto err_standby_open; |
| } |
| |
| if ((primary_dev && net_failover_xmit_ready(primary_dev)) || |
| (standby_dev && net_failover_xmit_ready(standby_dev))) { |
| netif_carrier_on(dev); |
| netif_tx_wake_all_queues(dev); |
| } |
| |
| return 0; |
| |
| err_standby_open: |
| if (primary_dev) |
| dev_close(primary_dev); |
| err_primary_open: |
| netif_tx_disable(dev); |
| return err; |
| } |
| |
| static int net_failover_close(struct net_device *dev) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *slave_dev; |
| |
| netif_tx_disable(dev); |
| |
| slave_dev = rtnl_dereference(nfo_info->primary_dev); |
| if (slave_dev) |
| dev_close(slave_dev); |
| |
| slave_dev = rtnl_dereference(nfo_info->standby_dev); |
| if (slave_dev) |
| dev_close(slave_dev); |
| |
| return 0; |
| } |
| |
| static netdev_tx_t net_failover_drop_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| atomic_long_inc(&dev->tx_dropped); |
| dev_kfree_skb_any(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| static netdev_tx_t net_failover_start_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *xmit_dev; |
| |
| /* Try xmit via primary netdev followed by standby netdev */ |
| xmit_dev = rcu_dereference_bh(nfo_info->primary_dev); |
| if (!xmit_dev || !net_failover_xmit_ready(xmit_dev)) { |
| xmit_dev = rcu_dereference_bh(nfo_info->standby_dev); |
| if (!xmit_dev || !net_failover_xmit_ready(xmit_dev)) |
| return net_failover_drop_xmit(skb, dev); |
| } |
| |
| skb->dev = xmit_dev; |
| skb->queue_mapping = qdisc_skb_cb(skb)->slave_dev_queue_mapping; |
| |
| return dev_queue_xmit(skb); |
| } |
| |
| static u16 net_failover_select_queue(struct net_device *dev, |
| struct sk_buff *skb, |
| struct net_device *sb_dev) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *primary_dev; |
| u16 txq; |
| |
| primary_dev = rcu_dereference(nfo_info->primary_dev); |
| if (primary_dev) { |
| const struct net_device_ops *ops = primary_dev->netdev_ops; |
| |
| if (ops->ndo_select_queue) |
| txq = ops->ndo_select_queue(primary_dev, skb, sb_dev); |
| else |
| txq = netdev_pick_tx(primary_dev, skb, NULL); |
| |
| qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping; |
| |
| return txq; |
| } |
| |
| txq = skb_rx_queue_recorded(skb) ? skb_get_rx_queue(skb) : 0; |
| |
| /* Save the original txq to restore before passing to the driver */ |
| qdisc_skb_cb(skb)->slave_dev_queue_mapping = skb->queue_mapping; |
| |
| if (unlikely(txq >= dev->real_num_tx_queues)) { |
| do { |
| txq -= dev->real_num_tx_queues; |
| } while (txq >= dev->real_num_tx_queues); |
| } |
| |
| return txq; |
| } |
| |
| /* fold stats, assuming all rtnl_link_stats64 fields are u64, but |
| * that some drivers can provide 32bit values only. |
| */ |
| static void net_failover_fold_stats(struct rtnl_link_stats64 *_res, |
| const struct rtnl_link_stats64 *_new, |
| const struct rtnl_link_stats64 *_old) |
| { |
| const u64 *new = (const u64 *)_new; |
| const u64 *old = (const u64 *)_old; |
| u64 *res = (u64 *)_res; |
| int i; |
| |
| for (i = 0; i < sizeof(*_res) / sizeof(u64); i++) { |
| u64 nv = new[i]; |
| u64 ov = old[i]; |
| s64 delta = nv - ov; |
| |
| /* detects if this particular field is 32bit only */ |
| if (((nv | ov) >> 32) == 0) |
| delta = (s64)(s32)((u32)nv - (u32)ov); |
| |
| /* filter anomalies, some drivers reset their stats |
| * at down/up events. |
| */ |
| if (delta > 0) |
| res[i] += delta; |
| } |
| } |
| |
| static void net_failover_get_stats(struct net_device *dev, |
| struct rtnl_link_stats64 *stats) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| const struct rtnl_link_stats64 *new; |
| struct rtnl_link_stats64 temp; |
| struct net_device *slave_dev; |
| |
| spin_lock(&nfo_info->stats_lock); |
| memcpy(stats, &nfo_info->failover_stats, sizeof(*stats)); |
| |
| rcu_read_lock(); |
| |
| slave_dev = rcu_dereference(nfo_info->primary_dev); |
| if (slave_dev) { |
| new = dev_get_stats(slave_dev, &temp); |
| net_failover_fold_stats(stats, new, &nfo_info->primary_stats); |
| memcpy(&nfo_info->primary_stats, new, sizeof(*new)); |
| } |
| |
| slave_dev = rcu_dereference(nfo_info->standby_dev); |
| if (slave_dev) { |
| new = dev_get_stats(slave_dev, &temp); |
| net_failover_fold_stats(stats, new, &nfo_info->standby_stats); |
| memcpy(&nfo_info->standby_stats, new, sizeof(*new)); |
| } |
| |
| rcu_read_unlock(); |
| |
| memcpy(&nfo_info->failover_stats, stats, sizeof(*stats)); |
| spin_unlock(&nfo_info->stats_lock); |
| } |
| |
| static int net_failover_change_mtu(struct net_device *dev, int new_mtu) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *primary_dev, *standby_dev; |
| int ret = 0; |
| |
| primary_dev = rtnl_dereference(nfo_info->primary_dev); |
| if (primary_dev) { |
| ret = dev_set_mtu(primary_dev, new_mtu); |
| if (ret) |
| return ret; |
| } |
| |
| standby_dev = rtnl_dereference(nfo_info->standby_dev); |
| if (standby_dev) { |
| ret = dev_set_mtu(standby_dev, new_mtu); |
| if (ret) { |
| if (primary_dev) |
| dev_set_mtu(primary_dev, dev->mtu); |
| return ret; |
| } |
| } |
| |
| dev->mtu = new_mtu; |
| |
| return 0; |
| } |
| |
| static void net_failover_set_rx_mode(struct net_device *dev) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *slave_dev; |
| |
| rcu_read_lock(); |
| |
| slave_dev = rcu_dereference(nfo_info->primary_dev); |
| if (slave_dev) { |
| dev_uc_sync_multiple(slave_dev, dev); |
| dev_mc_sync_multiple(slave_dev, dev); |
| } |
| |
| slave_dev = rcu_dereference(nfo_info->standby_dev); |
| if (slave_dev) { |
| dev_uc_sync_multiple(slave_dev, dev); |
| dev_mc_sync_multiple(slave_dev, dev); |
| } |
| |
| rcu_read_unlock(); |
| } |
| |
| static int net_failover_vlan_rx_add_vid(struct net_device *dev, __be16 proto, |
| u16 vid) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *primary_dev, *standby_dev; |
| int ret = 0; |
| |
| primary_dev = rcu_dereference(nfo_info->primary_dev); |
| if (primary_dev) { |
| ret = vlan_vid_add(primary_dev, proto, vid); |
| if (ret) |
| return ret; |
| } |
| |
| standby_dev = rcu_dereference(nfo_info->standby_dev); |
| if (standby_dev) { |
| ret = vlan_vid_add(standby_dev, proto, vid); |
| if (ret) |
| if (primary_dev) |
| vlan_vid_del(primary_dev, proto, vid); |
| } |
| |
| return ret; |
| } |
| |
| static int net_failover_vlan_rx_kill_vid(struct net_device *dev, __be16 proto, |
| u16 vid) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *slave_dev; |
| |
| slave_dev = rcu_dereference(nfo_info->primary_dev); |
| if (slave_dev) |
| vlan_vid_del(slave_dev, proto, vid); |
| |
| slave_dev = rcu_dereference(nfo_info->standby_dev); |
| if (slave_dev) |
| vlan_vid_del(slave_dev, proto, vid); |
| |
| return 0; |
| } |
| |
| static const struct net_device_ops failover_dev_ops = { |
| .ndo_open = net_failover_open, |
| .ndo_stop = net_failover_close, |
| .ndo_start_xmit = net_failover_start_xmit, |
| .ndo_select_queue = net_failover_select_queue, |
| .ndo_get_stats64 = net_failover_get_stats, |
| .ndo_change_mtu = net_failover_change_mtu, |
| .ndo_set_rx_mode = net_failover_set_rx_mode, |
| .ndo_vlan_rx_add_vid = net_failover_vlan_rx_add_vid, |
| .ndo_vlan_rx_kill_vid = net_failover_vlan_rx_kill_vid, |
| .ndo_validate_addr = eth_validate_addr, |
| .ndo_features_check = passthru_features_check, |
| }; |
| |
| #define FAILOVER_NAME "net_failover" |
| #define FAILOVER_VERSION "0.1" |
| |
| static void nfo_ethtool_get_drvinfo(struct net_device *dev, |
| struct ethtool_drvinfo *drvinfo) |
| { |
| strlcpy(drvinfo->driver, FAILOVER_NAME, sizeof(drvinfo->driver)); |
| strlcpy(drvinfo->version, FAILOVER_VERSION, sizeof(drvinfo->version)); |
| } |
| |
| static int nfo_ethtool_get_link_ksettings(struct net_device *dev, |
| struct ethtool_link_ksettings *cmd) |
| { |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *slave_dev; |
| |
| slave_dev = rtnl_dereference(nfo_info->primary_dev); |
| if (!slave_dev || !net_failover_xmit_ready(slave_dev)) { |
| slave_dev = rtnl_dereference(nfo_info->standby_dev); |
| if (!slave_dev || !net_failover_xmit_ready(slave_dev)) { |
| cmd->base.duplex = DUPLEX_UNKNOWN; |
| cmd->base.port = PORT_OTHER; |
| cmd->base.speed = SPEED_UNKNOWN; |
| |
| return 0; |
| } |
| } |
| |
| return __ethtool_get_link_ksettings(slave_dev, cmd); |
| } |
| |
| static const struct ethtool_ops failover_ethtool_ops = { |
| .get_drvinfo = nfo_ethtool_get_drvinfo, |
| .get_link = ethtool_op_get_link, |
| .get_link_ksettings = nfo_ethtool_get_link_ksettings, |
| }; |
| |
| /* Called when slave dev is injecting data into network stack. |
| * Change the associated network device from lower dev to failover dev. |
| * note: already called with rcu_read_lock |
| */ |
| static rx_handler_result_t net_failover_handle_frame(struct sk_buff **pskb) |
| { |
| struct sk_buff *skb = *pskb; |
| struct net_device *dev = rcu_dereference(skb->dev->rx_handler_data); |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *primary_dev, *standby_dev; |
| |
| primary_dev = rcu_dereference(nfo_info->primary_dev); |
| standby_dev = rcu_dereference(nfo_info->standby_dev); |
| |
| if (primary_dev && skb->dev == standby_dev) |
| return RX_HANDLER_EXACT; |
| |
| skb->dev = dev; |
| |
| return RX_HANDLER_ANOTHER; |
| } |
| |
| static void net_failover_compute_features(struct net_device *dev) |
| { |
| netdev_features_t vlan_features = FAILOVER_VLAN_FEATURES & |
| NETIF_F_ALL_FOR_ALL; |
| netdev_features_t enc_features = FAILOVER_ENC_FEATURES; |
| unsigned short max_hard_header_len = ETH_HLEN; |
| unsigned int dst_release_flag = IFF_XMIT_DST_RELEASE | |
| IFF_XMIT_DST_RELEASE_PERM; |
| struct net_failover_info *nfo_info = netdev_priv(dev); |
| struct net_device *primary_dev, *standby_dev; |
| |
| primary_dev = rcu_dereference(nfo_info->primary_dev); |
| if (primary_dev) { |
| vlan_features = |
| netdev_increment_features(vlan_features, |
| primary_dev->vlan_features, |
| FAILOVER_VLAN_FEATURES); |
| enc_features = |
| netdev_increment_features(enc_features, |
| primary_dev->hw_enc_features, |
| FAILOVER_ENC_FEATURES); |
| |
| dst_release_flag &= primary_dev->priv_flags; |
| if (primary_dev->hard_header_len > max_hard_header_len) |
| max_hard_header_len = primary_dev->hard_header_len; |
| } |
| |
| standby_dev = rcu_dereference(nfo_info->standby_dev); |
| if (standby_dev) { |
| vlan_features = |
| netdev_increment_features(vlan_features, |
| standby_dev->vlan_features, |
| FAILOVER_VLAN_FEATURES); |
| enc_features = |
| netdev_increment_features(enc_features, |
| standby_dev->hw_enc_features, |
| FAILOVER_ENC_FEATURES); |
| |
| dst_release_flag &= standby_dev->priv_flags; |
| if (standby_dev->hard_header_len > max_hard_header_len) |
| max_hard_header_len = standby_dev->hard_header_len; |
| } |
| |
| dev->vlan_features = vlan_features; |
| dev->hw_enc_features = enc_features | NETIF_F_GSO_ENCAP_ALL; |
| dev->hard_header_len = max_hard_header_len; |
| |
| dev->priv_flags &= ~IFF_XMIT_DST_RELEASE; |
| if (dst_release_flag == (IFF_XMIT_DST_RELEASE | |
| IFF_XMIT_DST_RELEASE_PERM)) |
| dev->priv_flags |= IFF_XMIT_DST_RELEASE; |
| |
| netdev_change_features(dev); |
| } |
| |
| static void net_failover_lower_state_changed(struct net_device *slave_dev, |
| struct net_device *primary_dev, |
| struct net_device *standby_dev) |
| { |
| struct netdev_lag_lower_state_info info; |
| |
| if (netif_carrier_ok(slave_dev)) |
| info.link_up = true; |
| else |
| info.link_up = false; |
| |
| if (slave_dev == primary_dev) { |
| if (netif_running(primary_dev)) |
| info.tx_enabled = true; |
| else |
| info.tx_enabled = false; |
| } else { |
| if ((primary_dev && netif_running(primary_dev)) || |
| (!netif_running(standby_dev))) |
| info.tx_enabled = false; |
| else |
| info.tx_enabled = true; |
| } |
| |
| netdev_lower_state_changed(slave_dev, &info); |
| } |
| |
| static int net_failover_slave_pre_register(struct net_device *slave_dev, |
| struct net_device *failover_dev) |
| { |
| struct net_device *standby_dev, *primary_dev; |
| struct net_failover_info *nfo_info; |
| bool slave_is_standby; |
| |
| nfo_info = netdev_priv(failover_dev); |
| standby_dev = rtnl_dereference(nfo_info->standby_dev); |
| primary_dev = rtnl_dereference(nfo_info->primary_dev); |
| slave_is_standby = slave_dev->dev.parent == failover_dev->dev.parent; |
| if (slave_is_standby ? standby_dev : primary_dev) { |
| netdev_err(failover_dev, "%s attempting to register as slave dev when %s already present\n", |
| slave_dev->name, |
| slave_is_standby ? "standby" : "primary"); |
| return -EINVAL; |
| } |
| |
| /* We want to allow only a direct attached VF device as a primary |
| * netdev. As there is no easy way to check for a VF device, restrict |
| * this to a pci device. |
| */ |
| if (!slave_is_standby && (!slave_dev->dev.parent || |
| !dev_is_pci(slave_dev->dev.parent))) |
| return -EINVAL; |
| |
| if (failover_dev->features & NETIF_F_VLAN_CHALLENGED && |
| vlan_uses_dev(failover_dev)) { |
| netdev_err(failover_dev, "Device %s is VLAN challenged and failover device has VLAN set up\n", |
| failover_dev->name); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int net_failover_slave_register(struct net_device *slave_dev, |
| struct net_device *failover_dev) |
| { |
| struct net_device *standby_dev, *primary_dev; |
| struct net_failover_info *nfo_info; |
| bool slave_is_standby; |
| u32 orig_mtu; |
| int err; |
| |
| /* Align MTU of slave with failover dev */ |
| orig_mtu = slave_dev->mtu; |
| err = dev_set_mtu(slave_dev, failover_dev->mtu); |
| if (err) { |
| netdev_err(failover_dev, "unable to change mtu of %s to %u register failed\n", |
| slave_dev->name, failover_dev->mtu); |
| goto done; |
| } |
| |
| dev_hold(slave_dev); |
| |
| if (netif_running(failover_dev)) { |
| err = dev_open(slave_dev, NULL); |
| if (err && (err != -EBUSY)) { |
| netdev_err(failover_dev, "Opening slave %s failed err:%d\n", |
| slave_dev->name, err); |
| goto err_dev_open; |
| } |
| } |
| |
| netif_addr_lock_bh(failover_dev); |
| dev_uc_sync_multiple(slave_dev, failover_dev); |
| dev_mc_sync_multiple(slave_dev, failover_dev); |
| netif_addr_unlock_bh(failover_dev); |
| |
| err = vlan_vids_add_by_dev(slave_dev, failover_dev); |
| if (err) { |
| netdev_err(failover_dev, "Failed to add vlan ids to device %s err:%d\n", |
| slave_dev->name, err); |
| goto err_vlan_add; |
| } |
| |
| nfo_info = netdev_priv(failover_dev); |
| standby_dev = rtnl_dereference(nfo_info->standby_dev); |
| primary_dev = rtnl_dereference(nfo_info->primary_dev); |
| slave_is_standby = slave_dev->dev.parent == failover_dev->dev.parent; |
| |
| if (slave_is_standby) { |
| rcu_assign_pointer(nfo_info->standby_dev, slave_dev); |
| standby_dev = slave_dev; |
| dev_get_stats(standby_dev, &nfo_info->standby_stats); |
| } else { |
| rcu_assign_pointer(nfo_info->primary_dev, slave_dev); |
| primary_dev = slave_dev; |
| dev_get_stats(primary_dev, &nfo_info->primary_stats); |
| failover_dev->min_mtu = slave_dev->min_mtu; |
| failover_dev->max_mtu = slave_dev->max_mtu; |
| } |
| |
| net_failover_lower_state_changed(slave_dev, primary_dev, standby_dev); |
| net_failover_compute_features(failover_dev); |
| |
| call_netdevice_notifiers(NETDEV_JOIN, slave_dev); |
| |
| netdev_info(failover_dev, "failover %s slave:%s registered\n", |
| slave_is_standby ? "standby" : "primary", slave_dev->name); |
| |
| return 0; |
| |
| err_vlan_add: |
| dev_uc_unsync(slave_dev, failover_dev); |
| dev_mc_unsync(slave_dev, failover_dev); |
| dev_close(slave_dev); |
| err_dev_open: |
| dev_put(slave_dev); |
| dev_set_mtu(slave_dev, orig_mtu); |
| done: |
| return err; |
| } |
| |
| static int net_failover_slave_pre_unregister(struct net_device *slave_dev, |
| struct net_device *failover_dev) |
| { |
| struct net_device *standby_dev, *primary_dev; |
| struct net_failover_info *nfo_info; |
| |
| nfo_info = netdev_priv(failover_dev); |
| primary_dev = rtnl_dereference(nfo_info->primary_dev); |
| standby_dev = rtnl_dereference(nfo_info->standby_dev); |
| |
| if (slave_dev != primary_dev && slave_dev != standby_dev) |
| return -ENODEV; |
| |
| return 0; |
| } |
| |
| static int net_failover_slave_unregister(struct net_device *slave_dev, |
| struct net_device *failover_dev) |
| { |
| struct net_device *standby_dev, *primary_dev; |
| struct net_failover_info *nfo_info; |
| bool slave_is_standby; |
| |
| nfo_info = netdev_priv(failover_dev); |
| primary_dev = rtnl_dereference(nfo_info->primary_dev); |
| standby_dev = rtnl_dereference(nfo_info->standby_dev); |
| |
| if (WARN_ON_ONCE(slave_dev != primary_dev && slave_dev != standby_dev)) |
| return -ENODEV; |
| |
| vlan_vids_del_by_dev(slave_dev, failover_dev); |
| dev_uc_unsync(slave_dev, failover_dev); |
| dev_mc_unsync(slave_dev, failover_dev); |
| dev_close(slave_dev); |
| |
| nfo_info = netdev_priv(failover_dev); |
| dev_get_stats(failover_dev, &nfo_info->failover_stats); |
| |
| slave_is_standby = slave_dev->dev.parent == failover_dev->dev.parent; |
| if (slave_is_standby) { |
| RCU_INIT_POINTER(nfo_info->standby_dev, NULL); |
| } else { |
| RCU_INIT_POINTER(nfo_info->primary_dev, NULL); |
| if (standby_dev) { |
| failover_dev->min_mtu = standby_dev->min_mtu; |
| failover_dev->max_mtu = standby_dev->max_mtu; |
| } |
| } |
| |
| dev_put(slave_dev); |
| |
| net_failover_compute_features(failover_dev); |
| |
| netdev_info(failover_dev, "failover %s slave:%s unregistered\n", |
| slave_is_standby ? "standby" : "primary", slave_dev->name); |
| |
| return 0; |
| } |
| |
| static int net_failover_slave_link_change(struct net_device *slave_dev, |
| struct net_device *failover_dev) |
| { |
| struct net_device *primary_dev, *standby_dev; |
| struct net_failover_info *nfo_info; |
| |
| nfo_info = netdev_priv(failover_dev); |
| |
| primary_dev = rtnl_dereference(nfo_info->primary_dev); |
| standby_dev = rtnl_dereference(nfo_info->standby_dev); |
| |
| if (slave_dev != primary_dev && slave_dev != standby_dev) |
| return -ENODEV; |
| |
| if ((primary_dev && net_failover_xmit_ready(primary_dev)) || |
| (standby_dev && net_failover_xmit_ready(standby_dev))) { |
| netif_carrier_on(failover_dev); |
| netif_tx_wake_all_queues(failover_dev); |
| } else { |
| dev_get_stats(failover_dev, &nfo_info->failover_stats); |
| netif_carrier_off(failover_dev); |
| netif_tx_stop_all_queues(failover_dev); |
| } |
| |
| net_failover_lower_state_changed(slave_dev, primary_dev, standby_dev); |
| |
| return 0; |
| } |
| |
| static int net_failover_slave_name_change(struct net_device *slave_dev, |
| struct net_device *failover_dev) |
| { |
| struct net_device *primary_dev, *standby_dev; |
| struct net_failover_info *nfo_info; |
| |
| nfo_info = netdev_priv(failover_dev); |
| |
| primary_dev = rtnl_dereference(nfo_info->primary_dev); |
| standby_dev = rtnl_dereference(nfo_info->standby_dev); |
| |
| if (slave_dev != primary_dev && slave_dev != standby_dev) |
| return -ENODEV; |
| |
| /* We need to bring up the slave after the rename by udev in case |
| * open failed with EBUSY when it was registered. |
| */ |
| dev_open(slave_dev, NULL); |
| |
| return 0; |
| } |
| |
| static struct failover_ops net_failover_ops = { |
| .slave_pre_register = net_failover_slave_pre_register, |
| .slave_register = net_failover_slave_register, |
| .slave_pre_unregister = net_failover_slave_pre_unregister, |
| .slave_unregister = net_failover_slave_unregister, |
| .slave_link_change = net_failover_slave_link_change, |
| .slave_name_change = net_failover_slave_name_change, |
| .slave_handle_frame = net_failover_handle_frame, |
| }; |
| |
| /** |
| * net_failover_create - Create and register a failover instance |
| * |
| * @standby_dev: standby netdev |
| * |
| * Creates a failover netdev and registers a failover instance for a standby |
| * netdev. Used by paravirtual drivers that use 3-netdev model. |
| * The failover netdev acts as a master device and controls 2 slave devices - |
| * the original standby netdev and a VF netdev with the same MAC gets |
| * registered as primary netdev. |
| * |
| * Return: pointer to failover instance |
| */ |
| struct failover *net_failover_create(struct net_device *standby_dev) |
| { |
| struct device *dev = standby_dev->dev.parent; |
| struct net_device *failover_dev; |
| struct failover *failover; |
| int err; |
| |
| /* Alloc at least 2 queues, for now we are going with 16 assuming |
| * that VF devices being enslaved won't have too many queues. |
| */ |
| failover_dev = alloc_etherdev_mq(sizeof(struct net_failover_info), 16); |
| if (!failover_dev) { |
| dev_err(dev, "Unable to allocate failover_netdev!\n"); |
| return ERR_PTR(-ENOMEM); |
| } |
| |
| dev_net_set(failover_dev, dev_net(standby_dev)); |
| SET_NETDEV_DEV(failover_dev, dev); |
| |
| failover_dev->netdev_ops = &failover_dev_ops; |
| failover_dev->ethtool_ops = &failover_ethtool_ops; |
| |
| /* Initialize the device options */ |
| failover_dev->priv_flags |= IFF_UNICAST_FLT | IFF_NO_QUEUE; |
| failover_dev->priv_flags &= ~(IFF_XMIT_DST_RELEASE | |
| IFF_TX_SKB_SHARING); |
| |
| /* don't acquire failover netdev's netif_tx_lock when transmitting */ |
| failover_dev->features |= NETIF_F_LLTX; |
| |
| /* Don't allow failover devices to change network namespaces. */ |
| failover_dev->features |= NETIF_F_NETNS_LOCAL; |
| |
| failover_dev->hw_features = FAILOVER_VLAN_FEATURES | |
| NETIF_F_HW_VLAN_CTAG_TX | |
| NETIF_F_HW_VLAN_CTAG_RX | |
| NETIF_F_HW_VLAN_CTAG_FILTER; |
| |
| failover_dev->hw_features |= NETIF_F_GSO_ENCAP_ALL; |
| failover_dev->features |= failover_dev->hw_features; |
| |
| memcpy(failover_dev->dev_addr, standby_dev->dev_addr, |
| failover_dev->addr_len); |
| |
| failover_dev->min_mtu = standby_dev->min_mtu; |
| failover_dev->max_mtu = standby_dev->max_mtu; |
| |
| err = register_netdev(failover_dev); |
| if (err) { |
| dev_err(dev, "Unable to register failover_dev!\n"); |
| goto err_register_netdev; |
| } |
| |
| netif_carrier_off(failover_dev); |
| |
| failover = failover_register(failover_dev, &net_failover_ops); |
| if (IS_ERR(failover)) { |
| err = PTR_ERR(failover); |
| goto err_failover_register; |
| } |
| |
| return failover; |
| |
| err_failover_register: |
| unregister_netdev(failover_dev); |
| err_register_netdev: |
| free_netdev(failover_dev); |
| |
| return ERR_PTR(err); |
| } |
| EXPORT_SYMBOL_GPL(net_failover_create); |
| |
| /** |
| * net_failover_destroy - Destroy a failover instance |
| * |
| * @failover: pointer to failover instance |
| * |
| * Unregisters any slave netdevs associated with the failover instance by |
| * calling failover_slave_unregister(). |
| * unregisters the failover instance itself and finally frees the failover |
| * netdev. Used by paravirtual drivers that use 3-netdev model. |
| * |
| */ |
| void net_failover_destroy(struct failover *failover) |
| { |
| struct net_failover_info *nfo_info; |
| struct net_device *failover_dev; |
| struct net_device *slave_dev; |
| |
| if (!failover) |
| return; |
| |
| failover_dev = rcu_dereference(failover->failover_dev); |
| nfo_info = netdev_priv(failover_dev); |
| |
| netif_device_detach(failover_dev); |
| |
| rtnl_lock(); |
| |
| slave_dev = rtnl_dereference(nfo_info->primary_dev); |
| if (slave_dev) |
| failover_slave_unregister(slave_dev); |
| |
| slave_dev = rtnl_dereference(nfo_info->standby_dev); |
| if (slave_dev) |
| failover_slave_unregister(slave_dev); |
| |
| failover_unregister(failover); |
| |
| unregister_netdevice(failover_dev); |
| |
| rtnl_unlock(); |
| |
| free_netdev(failover_dev); |
| } |
| EXPORT_SYMBOL_GPL(net_failover_destroy); |
| |
| static __init int |
| net_failover_init(void) |
| { |
| return 0; |
| } |
| module_init(net_failover_init); |
| |
| static __exit |
| void net_failover_exit(void) |
| { |
| } |
| module_exit(net_failover_exit); |
| |
| MODULE_DESCRIPTION("Failover driver for Paravirtual drivers"); |
| MODULE_LICENSE("GPL v2"); |