| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright 2002-2005, Instant802 Networks, Inc. |
| * Copyright 2005-2006, Devicescape Software, Inc. |
| * Copyright 2006-2007 Jiri Benc <jbenc@suse.cz> |
| * Copyright 2007 Johannes Berg <johannes@sipsolutions.net> |
| * Copyright 2013-2014 Intel Mobile Communications GmbH |
| * Copyright (C) 2018-2021 Intel Corporation |
| * |
| * Transmit and frame generation functions. |
| */ |
| |
| #include <linux/kernel.h> |
| #include <linux/slab.h> |
| #include <linux/skbuff.h> |
| #include <linux/if_vlan.h> |
| #include <linux/etherdevice.h> |
| #include <linux/bitmap.h> |
| #include <linux/rcupdate.h> |
| #include <linux/export.h> |
| #include <linux/timekeeping.h> |
| #include <net/net_namespace.h> |
| #include <net/ieee80211_radiotap.h> |
| #include <net/cfg80211.h> |
| #include <net/mac80211.h> |
| #include <net/codel.h> |
| #include <net/codel_impl.h> |
| #include <asm/unaligned.h> |
| #include <net/fq_impl.h> |
| |
| #include "ieee80211_i.h" |
| #include "driver-ops.h" |
| #include "led.h" |
| #include "mesh.h" |
| #include "wep.h" |
| #include "wpa.h" |
| #include "wme.h" |
| #include "rate.h" |
| |
| /* misc utils */ |
| |
| static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, |
| struct sk_buff *skb, int group_addr, |
| int next_frag_len) |
| { |
| int rate, mrate, erp, dur, i, shift = 0; |
| struct ieee80211_rate *txrate; |
| struct ieee80211_local *local = tx->local; |
| struct ieee80211_supported_band *sband; |
| struct ieee80211_hdr *hdr; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| u32 rate_flags = 0; |
| |
| /* assume HW handles this */ |
| if (tx->rate.flags & (IEEE80211_TX_RC_MCS | IEEE80211_TX_RC_VHT_MCS)) |
| return 0; |
| |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(tx->sdata->vif.chanctx_conf); |
| if (chanctx_conf) { |
| shift = ieee80211_chandef_get_shift(&chanctx_conf->def); |
| rate_flags = ieee80211_chandef_rate_flags(&chanctx_conf->def); |
| } |
| rcu_read_unlock(); |
| |
| /* uh huh? */ |
| if (WARN_ON_ONCE(tx->rate.idx < 0)) |
| return 0; |
| |
| sband = local->hw.wiphy->bands[info->band]; |
| txrate = &sband->bitrates[tx->rate.idx]; |
| |
| erp = txrate->flags & IEEE80211_RATE_ERP_G; |
| |
| /* device is expected to do this */ |
| if (sband->band == NL80211_BAND_S1GHZ) |
| return 0; |
| |
| /* |
| * data and mgmt (except PS Poll): |
| * - during CFP: 32768 |
| * - during contention period: |
| * if addr1 is group address: 0 |
| * if more fragments = 0 and addr1 is individual address: time to |
| * transmit one ACK plus SIFS |
| * if more fragments = 1 and addr1 is individual address: time to |
| * transmit next fragment plus 2 x ACK plus 3 x SIFS |
| * |
| * IEEE 802.11, 9.6: |
| * - control response frame (CTS or ACK) shall be transmitted using the |
| * same rate as the immediately previous frame in the frame exchange |
| * sequence, if this rate belongs to the PHY mandatory rates, or else |
| * at the highest possible rate belonging to the PHY rates in the |
| * BSSBasicRateSet |
| */ |
| hdr = (struct ieee80211_hdr *)skb->data; |
| if (ieee80211_is_ctl(hdr->frame_control)) { |
| /* TODO: These control frames are not currently sent by |
| * mac80211, but should they be implemented, this function |
| * needs to be updated to support duration field calculation. |
| * |
| * RTS: time needed to transmit pending data/mgmt frame plus |
| * one CTS frame plus one ACK frame plus 3 x SIFS |
| * CTS: duration of immediately previous RTS minus time |
| * required to transmit CTS and its SIFS |
| * ACK: 0 if immediately previous directed data/mgmt had |
| * more=0, with more=1 duration in ACK frame is duration |
| * from previous frame minus time needed to transmit ACK |
| * and its SIFS |
| * PS Poll: BIT(15) | BIT(14) | aid |
| */ |
| return 0; |
| } |
| |
| /* data/mgmt */ |
| if (0 /* FIX: data/mgmt during CFP */) |
| return cpu_to_le16(32768); |
| |
| if (group_addr) /* Group address as the destination - no ACK */ |
| return 0; |
| |
| /* Individual destination address: |
| * IEEE 802.11, Ch. 9.6 (after IEEE 802.11g changes) |
| * CTS and ACK frames shall be transmitted using the highest rate in |
| * basic rate set that is less than or equal to the rate of the |
| * immediately previous frame and that is using the same modulation |
| * (CCK or OFDM). If no basic rate set matches with these requirements, |
| * the highest mandatory rate of the PHY that is less than or equal to |
| * the rate of the previous frame is used. |
| * Mandatory rates for IEEE 802.11g PHY: 1, 2, 5.5, 11, 6, 12, 24 Mbps |
| */ |
| rate = -1; |
| /* use lowest available if everything fails */ |
| mrate = sband->bitrates[0].bitrate; |
| for (i = 0; i < sband->n_bitrates; i++) { |
| struct ieee80211_rate *r = &sband->bitrates[i]; |
| |
| if (r->bitrate > txrate->bitrate) |
| break; |
| |
| if ((rate_flags & r->flags) != rate_flags) |
| continue; |
| |
| if (tx->sdata->vif.bss_conf.basic_rates & BIT(i)) |
| rate = DIV_ROUND_UP(r->bitrate, 1 << shift); |
| |
| switch (sband->band) { |
| case NL80211_BAND_2GHZ: { |
| u32 flag; |
| if (tx->sdata->flags & IEEE80211_SDATA_OPERATING_GMODE) |
| flag = IEEE80211_RATE_MANDATORY_G; |
| else |
| flag = IEEE80211_RATE_MANDATORY_B; |
| if (r->flags & flag) |
| mrate = r->bitrate; |
| break; |
| } |
| case NL80211_BAND_5GHZ: |
| case NL80211_BAND_6GHZ: |
| if (r->flags & IEEE80211_RATE_MANDATORY_A) |
| mrate = r->bitrate; |
| break; |
| case NL80211_BAND_S1GHZ: |
| case NL80211_BAND_60GHZ: |
| /* TODO, for now fall through */ |
| case NUM_NL80211_BANDS: |
| WARN_ON(1); |
| break; |
| } |
| } |
| if (rate == -1) { |
| /* No matching basic rate found; use highest suitable mandatory |
| * PHY rate */ |
| rate = DIV_ROUND_UP(mrate, 1 << shift); |
| } |
| |
| /* Don't calculate ACKs for QoS Frames with NoAck Policy set */ |
| if (ieee80211_is_data_qos(hdr->frame_control) && |
| *(ieee80211_get_qos_ctl(hdr)) & IEEE80211_QOS_CTL_ACK_POLICY_NOACK) |
| dur = 0; |
| else |
| /* Time needed to transmit ACK |
| * (10 bytes + 4-byte FCS = 112 bits) plus SIFS; rounded up |
| * to closest integer */ |
| dur = ieee80211_frame_duration(sband->band, 10, rate, erp, |
| tx->sdata->vif.bss_conf.use_short_preamble, |
| shift); |
| |
| if (next_frag_len) { |
| /* Frame is fragmented: duration increases with time needed to |
| * transmit next fragment plus ACK and 2 x SIFS. */ |
| dur *= 2; /* ACK + SIFS */ |
| /* next fragment */ |
| dur += ieee80211_frame_duration(sband->band, next_frag_len, |
| txrate->bitrate, erp, |
| tx->sdata->vif.bss_conf.use_short_preamble, |
| shift); |
| } |
| |
| return cpu_to_le16(dur); |
| } |
| |
| /* tx handlers */ |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_dynamic_ps(struct ieee80211_tx_data *tx) |
| { |
| struct ieee80211_local *local = tx->local; |
| struct ieee80211_if_managed *ifmgd; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); |
| |
| /* driver doesn't support power save */ |
| if (!ieee80211_hw_check(&local->hw, SUPPORTS_PS)) |
| return TX_CONTINUE; |
| |
| /* hardware does dynamic power save */ |
| if (ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS)) |
| return TX_CONTINUE; |
| |
| /* dynamic power save disabled */ |
| if (local->hw.conf.dynamic_ps_timeout <= 0) |
| return TX_CONTINUE; |
| |
| /* we are scanning, don't enable power save */ |
| if (local->scanning) |
| return TX_CONTINUE; |
| |
| if (!local->ps_sdata) |
| return TX_CONTINUE; |
| |
| /* No point if we're going to suspend */ |
| if (local->quiescing) |
| return TX_CONTINUE; |
| |
| /* dynamic ps is supported only in managed mode */ |
| if (tx->sdata->vif.type != NL80211_IFTYPE_STATION) |
| return TX_CONTINUE; |
| |
| if (unlikely(info->flags & IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) |
| return TX_CONTINUE; |
| |
| ifmgd = &tx->sdata->u.mgd; |
| |
| /* |
| * Don't wakeup from power save if u-apsd is enabled, voip ac has |
| * u-apsd enabled and the frame is in voip class. This effectively |
| * means that even if all access categories have u-apsd enabled, in |
| * practise u-apsd is only used with the voip ac. This is a |
| * workaround for the case when received voip class packets do not |
| * have correct qos tag for some reason, due the network or the |
| * peer application. |
| * |
| * Note: ifmgd->uapsd_queues access is racy here. If the value is |
| * changed via debugfs, user needs to reassociate manually to have |
| * everything in sync. |
| */ |
| if ((ifmgd->flags & IEEE80211_STA_UAPSD_ENABLED) && |
| (ifmgd->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) && |
| skb_get_queue_mapping(tx->skb) == IEEE80211_AC_VO) |
| return TX_CONTINUE; |
| |
| if (local->hw.conf.flags & IEEE80211_CONF_PS) { |
| ieee80211_stop_queues_by_reason(&local->hw, |
| IEEE80211_MAX_QUEUE_MAP, |
| IEEE80211_QUEUE_STOP_REASON_PS, |
| false); |
| ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; |
| ieee80211_queue_work(&local->hw, |
| &local->dynamic_ps_disable_work); |
| } |
| |
| /* Don't restart the timer if we're not disassociated */ |
| if (!ifmgd->associated) |
| return TX_CONTINUE; |
| |
| mod_timer(&local->dynamic_ps_timer, jiffies + |
| msecs_to_jiffies(local->hw.conf.dynamic_ps_timeout)); |
| |
| return TX_CONTINUE; |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_check_assoc(struct ieee80211_tx_data *tx) |
| { |
| |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); |
| bool assoc = false; |
| |
| if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED)) |
| return TX_CONTINUE; |
| |
| if (unlikely(test_bit(SCAN_SW_SCANNING, &tx->local->scanning)) && |
| test_bit(SDATA_STATE_OFFCHANNEL, &tx->sdata->state) && |
| !ieee80211_is_probe_req(hdr->frame_control) && |
| !ieee80211_is_any_nullfunc(hdr->frame_control)) |
| /* |
| * When software scanning only nullfunc frames (to notify |
| * the sleep state to the AP) and probe requests (for the |
| * active scan) are allowed, all other frames should not be |
| * sent and we should not get here, but if we do |
| * nonetheless, drop them to avoid sending them |
| * off-channel. See the link below and |
| * ieee80211_start_scan() for more. |
| * |
| * http://article.gmane.org/gmane.linux.kernel.wireless.general/30089 |
| */ |
| return TX_DROP; |
| |
| if (tx->sdata->vif.type == NL80211_IFTYPE_OCB) |
| return TX_CONTINUE; |
| |
| if (tx->flags & IEEE80211_TX_PS_BUFFERED) |
| return TX_CONTINUE; |
| |
| if (tx->sta) |
| assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); |
| |
| if (likely(tx->flags & IEEE80211_TX_UNICAST)) { |
| if (unlikely(!assoc && |
| ieee80211_is_data(hdr->frame_control))) { |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG |
| sdata_info(tx->sdata, |
| "dropped data frame to not associated station %pM\n", |
| hdr->addr1); |
| #endif |
| I802_DEBUG_INC(tx->local->tx_handlers_drop_not_assoc); |
| return TX_DROP; |
| } |
| } else if (unlikely(ieee80211_is_data(hdr->frame_control) && |
| ieee80211_vif_get_num_mcast_if(tx->sdata) == 0)) { |
| /* |
| * No associated STAs - no need to send multicast |
| * frames. |
| */ |
| return TX_DROP; |
| } |
| |
| return TX_CONTINUE; |
| } |
| |
| /* This function is called whenever the AP is about to exceed the maximum limit |
| * of buffered frames for power saving STAs. This situation should not really |
| * happen often during normal operation, so dropping the oldest buffered packet |
| * from each queue should be OK to make some room for new frames. */ |
| static void purge_old_ps_buffers(struct ieee80211_local *local) |
| { |
| int total = 0, purged = 0; |
| struct sk_buff *skb; |
| struct ieee80211_sub_if_data *sdata; |
| struct sta_info *sta; |
| |
| list_for_each_entry_rcu(sdata, &local->interfaces, list) { |
| struct ps_data *ps; |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP) |
| ps = &sdata->u.ap.ps; |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) |
| ps = &sdata->u.mesh.ps; |
| else |
| continue; |
| |
| skb = skb_dequeue(&ps->bc_buf); |
| if (skb) { |
| purged++; |
| ieee80211_free_txskb(&local->hw, skb); |
| } |
| total += skb_queue_len(&ps->bc_buf); |
| } |
| |
| /* |
| * Drop one frame from each station from the lowest-priority |
| * AC that has frames at all. |
| */ |
| list_for_each_entry_rcu(sta, &local->sta_list, list) { |
| int ac; |
| |
| for (ac = IEEE80211_AC_BK; ac >= IEEE80211_AC_VO; ac--) { |
| skb = skb_dequeue(&sta->ps_tx_buf[ac]); |
| total += skb_queue_len(&sta->ps_tx_buf[ac]); |
| if (skb) { |
| purged++; |
| ieee80211_free_txskb(&local->hw, skb); |
| break; |
| } |
| } |
| } |
| |
| local->total_ps_buffered = total; |
| ps_dbg_hw(&local->hw, "PS buffers full - purged %d frames\n", purged); |
| } |
| |
| static ieee80211_tx_result |
| ieee80211_tx_h_multicast_ps_buf(struct ieee80211_tx_data *tx) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; |
| struct ps_data *ps; |
| |
| /* |
| * broadcast/multicast frame |
| * |
| * If any of the associated/peer stations is in power save mode, |
| * the frame is buffered to be sent after DTIM beacon frame. |
| * This is done either by the hardware or us. |
| */ |
| |
| /* powersaving STAs currently only in AP/VLAN/mesh mode */ |
| if (tx->sdata->vif.type == NL80211_IFTYPE_AP || |
| tx->sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { |
| if (!tx->sdata->bss) |
| return TX_CONTINUE; |
| |
| ps = &tx->sdata->bss->ps; |
| } else if (ieee80211_vif_is_mesh(&tx->sdata->vif)) { |
| ps = &tx->sdata->u.mesh.ps; |
| } else { |
| return TX_CONTINUE; |
| } |
| |
| |
| /* no buffering for ordered frames */ |
| if (ieee80211_has_order(hdr->frame_control)) |
| return TX_CONTINUE; |
| |
| if (ieee80211_is_probe_req(hdr->frame_control)) |
| return TX_CONTINUE; |
| |
| if (ieee80211_hw_check(&tx->local->hw, QUEUE_CONTROL)) |
| info->hw_queue = tx->sdata->vif.cab_queue; |
| |
| /* no stations in PS mode and no buffered packets */ |
| if (!atomic_read(&ps->num_sta_ps) && skb_queue_empty(&ps->bc_buf)) |
| return TX_CONTINUE; |
| |
| info->flags |= IEEE80211_TX_CTL_SEND_AFTER_DTIM; |
| |
| /* device releases frame after DTIM beacon */ |
| if (!ieee80211_hw_check(&tx->local->hw, HOST_BROADCAST_PS_BUFFERING)) |
| return TX_CONTINUE; |
| |
| /* buffered in mac80211 */ |
| if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) |
| purge_old_ps_buffers(tx->local); |
| |
| if (skb_queue_len(&ps->bc_buf) >= AP_MAX_BC_BUFFER) { |
| ps_dbg(tx->sdata, |
| "BC TX buffer full - dropping the oldest frame\n"); |
| ieee80211_free_txskb(&tx->local->hw, skb_dequeue(&ps->bc_buf)); |
| } else |
| tx->local->total_ps_buffered++; |
| |
| skb_queue_tail(&ps->bc_buf, tx->skb); |
| |
| return TX_QUEUED; |
| } |
| |
| static int ieee80211_use_mfp(__le16 fc, struct sta_info *sta, |
| struct sk_buff *skb) |
| { |
| if (!ieee80211_is_mgmt(fc)) |
| return 0; |
| |
| if (sta == NULL || !test_sta_flag(sta, WLAN_STA_MFP)) |
| return 0; |
| |
| if (!ieee80211_is_robust_mgmt_frame(skb)) |
| return 0; |
| |
| return 1; |
| } |
| |
| static ieee80211_tx_result |
| ieee80211_tx_h_unicast_ps_buf(struct ieee80211_tx_data *tx) |
| { |
| struct sta_info *sta = tx->sta; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; |
| struct ieee80211_local *local = tx->local; |
| |
| if (unlikely(!sta)) |
| return TX_CONTINUE; |
| |
| if (unlikely((test_sta_flag(sta, WLAN_STA_PS_STA) || |
| test_sta_flag(sta, WLAN_STA_PS_DRIVER) || |
| test_sta_flag(sta, WLAN_STA_PS_DELIVER)) && |
| !(info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER))) { |
| int ac = skb_get_queue_mapping(tx->skb); |
| |
| if (ieee80211_is_mgmt(hdr->frame_control) && |
| !ieee80211_is_bufferable_mmpdu(hdr->frame_control)) { |
| info->flags |= IEEE80211_TX_CTL_NO_PS_BUFFER; |
| return TX_CONTINUE; |
| } |
| |
| ps_dbg(sta->sdata, "STA %pM aid %d: PS buffer for AC %d\n", |
| sta->sta.addr, sta->sta.aid, ac); |
| if (tx->local->total_ps_buffered >= TOTAL_MAX_TX_BUFFER) |
| purge_old_ps_buffers(tx->local); |
| |
| /* sync with ieee80211_sta_ps_deliver_wakeup */ |
| spin_lock(&sta->ps_lock); |
| /* |
| * STA woke up the meantime and all the frames on ps_tx_buf have |
| * been queued to pending queue. No reordering can happen, go |
| * ahead and Tx the packet. |
| */ |
| if (!test_sta_flag(sta, WLAN_STA_PS_STA) && |
| !test_sta_flag(sta, WLAN_STA_PS_DRIVER) && |
| !test_sta_flag(sta, WLAN_STA_PS_DELIVER)) { |
| spin_unlock(&sta->ps_lock); |
| return TX_CONTINUE; |
| } |
| |
| if (skb_queue_len(&sta->ps_tx_buf[ac]) >= STA_MAX_TX_BUFFER) { |
| struct sk_buff *old = skb_dequeue(&sta->ps_tx_buf[ac]); |
| ps_dbg(tx->sdata, |
| "STA %pM TX buffer for AC %d full - dropping oldest frame\n", |
| sta->sta.addr, ac); |
| ieee80211_free_txskb(&local->hw, old); |
| } else |
| tx->local->total_ps_buffered++; |
| |
| info->control.jiffies = jiffies; |
| info->control.vif = &tx->sdata->vif; |
| info->control.flags |= IEEE80211_TX_INTCFL_NEED_TXPROCESSING; |
| info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS; |
| skb_queue_tail(&sta->ps_tx_buf[ac], tx->skb); |
| spin_unlock(&sta->ps_lock); |
| |
| if (!timer_pending(&local->sta_cleanup)) |
| mod_timer(&local->sta_cleanup, |
| round_jiffies(jiffies + |
| STA_INFO_CLEANUP_INTERVAL)); |
| |
| /* |
| * We queued up some frames, so the TIM bit might |
| * need to be set, recalculate it. |
| */ |
| sta_info_recalc_tim(sta); |
| |
| return TX_QUEUED; |
| } else if (unlikely(test_sta_flag(sta, WLAN_STA_PS_STA))) { |
| ps_dbg(tx->sdata, |
| "STA %pM in PS mode, but polling/in SP -> send frame\n", |
| sta->sta.addr); |
| } |
| |
| return TX_CONTINUE; |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_ps_buf(struct ieee80211_tx_data *tx) |
| { |
| if (unlikely(tx->flags & IEEE80211_TX_PS_BUFFERED)) |
| return TX_CONTINUE; |
| |
| if (tx->flags & IEEE80211_TX_UNICAST) |
| return ieee80211_tx_h_unicast_ps_buf(tx); |
| else |
| return ieee80211_tx_h_multicast_ps_buf(tx); |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_check_control_port_protocol(struct ieee80211_tx_data *tx) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); |
| |
| if (unlikely(tx->sdata->control_port_protocol == tx->skb->protocol)) { |
| if (tx->sdata->control_port_no_encrypt) |
| info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| info->control.flags |= IEEE80211_TX_CTRL_PORT_CTRL_PROTO; |
| info->flags |= IEEE80211_TX_CTL_USE_MINRATE; |
| } |
| |
| return TX_CONTINUE; |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_select_key(struct ieee80211_tx_data *tx) |
| { |
| struct ieee80211_key *key; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; |
| |
| if (unlikely(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) { |
| tx->key = NULL; |
| return TX_CONTINUE; |
| } |
| |
| if (tx->sta && |
| (key = rcu_dereference(tx->sta->ptk[tx->sta->ptk_idx]))) |
| tx->key = key; |
| else if (ieee80211_is_group_privacy_action(tx->skb) && |
| (key = rcu_dereference(tx->sdata->default_multicast_key))) |
| tx->key = key; |
| else if (ieee80211_is_mgmt(hdr->frame_control) && |
| is_multicast_ether_addr(hdr->addr1) && |
| ieee80211_is_robust_mgmt_frame(tx->skb) && |
| (key = rcu_dereference(tx->sdata->default_mgmt_key))) |
| tx->key = key; |
| else if (is_multicast_ether_addr(hdr->addr1) && |
| (key = rcu_dereference(tx->sdata->default_multicast_key))) |
| tx->key = key; |
| else if (!is_multicast_ether_addr(hdr->addr1) && |
| (key = rcu_dereference(tx->sdata->default_unicast_key))) |
| tx->key = key; |
| else |
| tx->key = NULL; |
| |
| if (tx->key) { |
| bool skip_hw = false; |
| |
| /* TODO: add threshold stuff again */ |
| |
| switch (tx->key->conf.cipher) { |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| case WLAN_CIPHER_SUITE_TKIP: |
| if (!ieee80211_is_data_present(hdr->frame_control)) |
| tx->key = NULL; |
| break; |
| case WLAN_CIPHER_SUITE_CCMP: |
| case WLAN_CIPHER_SUITE_CCMP_256: |
| case WLAN_CIPHER_SUITE_GCMP: |
| case WLAN_CIPHER_SUITE_GCMP_256: |
| if (!ieee80211_is_data_present(hdr->frame_control) && |
| !ieee80211_use_mfp(hdr->frame_control, tx->sta, |
| tx->skb) && |
| !ieee80211_is_group_privacy_action(tx->skb)) |
| tx->key = NULL; |
| else |
| skip_hw = (tx->key->conf.flags & |
| IEEE80211_KEY_FLAG_SW_MGMT_TX) && |
| ieee80211_is_mgmt(hdr->frame_control); |
| break; |
| case WLAN_CIPHER_SUITE_AES_CMAC: |
| case WLAN_CIPHER_SUITE_BIP_CMAC_256: |
| case WLAN_CIPHER_SUITE_BIP_GMAC_128: |
| case WLAN_CIPHER_SUITE_BIP_GMAC_256: |
| if (!ieee80211_is_mgmt(hdr->frame_control)) |
| tx->key = NULL; |
| break; |
| } |
| |
| if (unlikely(tx->key && tx->key->flags & KEY_FLAG_TAINTED && |
| !ieee80211_is_deauth(hdr->frame_control))) |
| return TX_DROP; |
| |
| if (!skip_hw && tx->key && |
| tx->key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) |
| info->control.hw_key = &tx->key->conf; |
| } else if (ieee80211_is_data_present(hdr->frame_control) && tx->sta && |
| test_sta_flag(tx->sta, WLAN_STA_USES_ENCRYPTION)) { |
| return TX_DROP; |
| } |
| |
| return TX_CONTINUE; |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); |
| struct ieee80211_hdr *hdr = (void *)tx->skb->data; |
| struct ieee80211_supported_band *sband; |
| u32 len; |
| struct ieee80211_tx_rate_control txrc; |
| struct ieee80211_sta_rates *ratetbl = NULL; |
| bool encap = info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP; |
| bool assoc = false; |
| |
| memset(&txrc, 0, sizeof(txrc)); |
| |
| sband = tx->local->hw.wiphy->bands[info->band]; |
| |
| len = min_t(u32, tx->skb->len + FCS_LEN, |
| tx->local->hw.wiphy->frag_threshold); |
| |
| /* set up the tx rate control struct we give the RC algo */ |
| txrc.hw = &tx->local->hw; |
| txrc.sband = sband; |
| txrc.bss_conf = &tx->sdata->vif.bss_conf; |
| txrc.skb = tx->skb; |
| txrc.reported_rate.idx = -1; |
| txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[info->band]; |
| |
| if (tx->sdata->rc_has_mcs_mask[info->band]) |
| txrc.rate_idx_mcs_mask = |
| tx->sdata->rc_rateidx_mcs_mask[info->band]; |
| |
| txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP || |
| tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT || |
| tx->sdata->vif.type == NL80211_IFTYPE_ADHOC || |
| tx->sdata->vif.type == NL80211_IFTYPE_OCB); |
| |
| /* set up RTS protection if desired */ |
| if (len > tx->local->hw.wiphy->rts_threshold) { |
| txrc.rts = true; |
| } |
| |
| info->control.use_rts = txrc.rts; |
| info->control.use_cts_prot = tx->sdata->vif.bss_conf.use_cts_prot; |
| |
| /* |
| * Use short preamble if the BSS can handle it, but not for |
| * management frames unless we know the receiver can handle |
| * that -- the management frame might be to a station that |
| * just wants a probe response. |
| */ |
| if (tx->sdata->vif.bss_conf.use_short_preamble && |
| (ieee80211_is_tx_data(tx->skb) || |
| (tx->sta && test_sta_flag(tx->sta, WLAN_STA_SHORT_PREAMBLE)))) |
| txrc.short_preamble = true; |
| |
| info->control.short_preamble = txrc.short_preamble; |
| |
| /* don't ask rate control when rate already injected via radiotap */ |
| if (info->control.flags & IEEE80211_TX_CTRL_RATE_INJECT) |
| return TX_CONTINUE; |
| |
| if (tx->sta) |
| assoc = test_sta_flag(tx->sta, WLAN_STA_ASSOC); |
| |
| /* |
| * Lets not bother rate control if we're associated and cannot |
| * talk to the sta. This should not happen. |
| */ |
| if (WARN(test_bit(SCAN_SW_SCANNING, &tx->local->scanning) && assoc && |
| !rate_usable_index_exists(sband, &tx->sta->sta), |
| "%s: Dropped data frame as no usable bitrate found while " |
| "scanning and associated. Target station: " |
| "%pM on %d GHz band\n", |
| tx->sdata->name, |
| encap ? ((struct ethhdr *)hdr)->h_dest : hdr->addr1, |
| info->band ? 5 : 2)) |
| return TX_DROP; |
| |
| /* |
| * If we're associated with the sta at this point we know we can at |
| * least send the frame at the lowest bit rate. |
| */ |
| rate_control_get_rate(tx->sdata, tx->sta, &txrc); |
| |
| if (tx->sta && !info->control.skip_table) |
| ratetbl = rcu_dereference(tx->sta->sta.rates); |
| |
| if (unlikely(info->control.rates[0].idx < 0)) { |
| if (ratetbl) { |
| struct ieee80211_tx_rate rate = { |
| .idx = ratetbl->rate[0].idx, |
| .flags = ratetbl->rate[0].flags, |
| .count = ratetbl->rate[0].count |
| }; |
| |
| if (ratetbl->rate[0].idx < 0) |
| return TX_DROP; |
| |
| tx->rate = rate; |
| } else { |
| return TX_DROP; |
| } |
| } else { |
| tx->rate = info->control.rates[0]; |
| } |
| |
| if (txrc.reported_rate.idx < 0) { |
| txrc.reported_rate = tx->rate; |
| if (tx->sta && ieee80211_is_tx_data(tx->skb)) |
| tx->sta->tx_stats.last_rate = txrc.reported_rate; |
| } else if (tx->sta) |
| tx->sta->tx_stats.last_rate = txrc.reported_rate; |
| |
| if (ratetbl) |
| return TX_CONTINUE; |
| |
| if (unlikely(!info->control.rates[0].count)) |
| info->control.rates[0].count = 1; |
| |
| if (WARN_ON_ONCE((info->control.rates[0].count > 1) && |
| (info->flags & IEEE80211_TX_CTL_NO_ACK))) |
| info->control.rates[0].count = 1; |
| |
| return TX_CONTINUE; |
| } |
| |
| static __le16 ieee80211_tx_next_seq(struct sta_info *sta, int tid) |
| { |
| u16 *seq = &sta->tid_seq[tid]; |
| __le16 ret = cpu_to_le16(*seq); |
| |
| /* Increase the sequence number. */ |
| *seq = (*seq + 0x10) & IEEE80211_SCTL_SEQ; |
| |
| return ret; |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_sequence(struct ieee80211_tx_data *tx) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)tx->skb->data; |
| int tid; |
| |
| /* |
| * Packet injection may want to control the sequence |
| * number, if we have no matching interface then we |
| * neither assign one ourselves nor ask the driver to. |
| */ |
| if (unlikely(info->control.vif->type == NL80211_IFTYPE_MONITOR)) |
| return TX_CONTINUE; |
| |
| if (unlikely(ieee80211_is_ctl(hdr->frame_control))) |
| return TX_CONTINUE; |
| |
| if (ieee80211_hdrlen(hdr->frame_control) < 24) |
| return TX_CONTINUE; |
| |
| if (ieee80211_is_qos_nullfunc(hdr->frame_control)) |
| return TX_CONTINUE; |
| |
| if (info->control.flags & IEEE80211_TX_CTRL_NO_SEQNO) |
| return TX_CONTINUE; |
| |
| /* |
| * Anything but QoS data that has a sequence number field |
| * (is long enough) gets a sequence number from the global |
| * counter. QoS data frames with a multicast destination |
| * also use the global counter (802.11-2012 9.3.2.10). |
| */ |
| if (!ieee80211_is_data_qos(hdr->frame_control) || |
| is_multicast_ether_addr(hdr->addr1)) { |
| /* driver should assign sequence number */ |
| info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; |
| /* for pure STA mode without beacons, we can do it */ |
| hdr->seq_ctrl = cpu_to_le16(tx->sdata->sequence_number); |
| tx->sdata->sequence_number += 0x10; |
| if (tx->sta) |
| tx->sta->tx_stats.msdu[IEEE80211_NUM_TIDS]++; |
| return TX_CONTINUE; |
| } |
| |
| /* |
| * This should be true for injected/management frames only, for |
| * management frames we have set the IEEE80211_TX_CTL_ASSIGN_SEQ |
| * above since they are not QoS-data frames. |
| */ |
| if (!tx->sta) |
| return TX_CONTINUE; |
| |
| /* include per-STA, per-TID sequence counter */ |
| tid = ieee80211_get_tid(hdr); |
| tx->sta->tx_stats.msdu[tid]++; |
| |
| hdr->seq_ctrl = ieee80211_tx_next_seq(tx->sta, tid); |
| |
| return TX_CONTINUE; |
| } |
| |
| static int ieee80211_fragment(struct ieee80211_tx_data *tx, |
| struct sk_buff *skb, int hdrlen, |
| int frag_threshold) |
| { |
| struct ieee80211_local *local = tx->local; |
| struct ieee80211_tx_info *info; |
| struct sk_buff *tmp; |
| int per_fragm = frag_threshold - hdrlen - FCS_LEN; |
| int pos = hdrlen + per_fragm; |
| int rem = skb->len - hdrlen - per_fragm; |
| |
| if (WARN_ON(rem < 0)) |
| return -EINVAL; |
| |
| /* first fragment was already added to queue by caller */ |
| |
| while (rem) { |
| int fraglen = per_fragm; |
| |
| if (fraglen > rem) |
| fraglen = rem; |
| rem -= fraglen; |
| tmp = dev_alloc_skb(local->tx_headroom + |
| frag_threshold + |
| tx->sdata->encrypt_headroom + |
| IEEE80211_ENCRYPT_TAILROOM); |
| if (!tmp) |
| return -ENOMEM; |
| |
| __skb_queue_tail(&tx->skbs, tmp); |
| |
| skb_reserve(tmp, |
| local->tx_headroom + tx->sdata->encrypt_headroom); |
| |
| /* copy control information */ |
| memcpy(tmp->cb, skb->cb, sizeof(tmp->cb)); |
| |
| info = IEEE80211_SKB_CB(tmp); |
| info->flags &= ~(IEEE80211_TX_CTL_CLEAR_PS_FILT | |
| IEEE80211_TX_CTL_FIRST_FRAGMENT); |
| |
| if (rem) |
| info->flags |= IEEE80211_TX_CTL_MORE_FRAMES; |
| |
| skb_copy_queue_mapping(tmp, skb); |
| tmp->priority = skb->priority; |
| tmp->dev = skb->dev; |
| |
| /* copy header and data */ |
| skb_put_data(tmp, skb->data, hdrlen); |
| skb_put_data(tmp, skb->data + pos, fraglen); |
| |
| pos += fraglen; |
| } |
| |
| /* adjust first fragment's length */ |
| skb_trim(skb, hdrlen + per_fragm); |
| return 0; |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx) |
| { |
| struct sk_buff *skb = tx->skb; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_hdr *hdr = (void *)skb->data; |
| int frag_threshold = tx->local->hw.wiphy->frag_threshold; |
| int hdrlen; |
| int fragnum; |
| |
| /* no matter what happens, tx->skb moves to tx->skbs */ |
| __skb_queue_tail(&tx->skbs, skb); |
| tx->skb = NULL; |
| |
| if (info->flags & IEEE80211_TX_CTL_DONTFRAG) |
| return TX_CONTINUE; |
| |
| if (ieee80211_hw_check(&tx->local->hw, SUPPORTS_TX_FRAG)) |
| return TX_CONTINUE; |
| |
| /* |
| * Warn when submitting a fragmented A-MPDU frame and drop it. |
| * This scenario is handled in ieee80211_tx_prepare but extra |
| * caution taken here as fragmented ampdu may cause Tx stop. |
| */ |
| if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU)) |
| return TX_DROP; |
| |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); |
| |
| /* internal error, why isn't DONTFRAG set? */ |
| if (WARN_ON(skb->len + FCS_LEN <= frag_threshold)) |
| return TX_DROP; |
| |
| /* |
| * Now fragment the frame. This will allocate all the fragments and |
| * chain them (using skb as the first fragment) to skb->next. |
| * During transmission, we will remove the successfully transmitted |
| * fragments from this list. When the low-level driver rejects one |
| * of the fragments then we will simply pretend to accept the skb |
| * but store it away as pending. |
| */ |
| if (ieee80211_fragment(tx, skb, hdrlen, frag_threshold)) |
| return TX_DROP; |
| |
| /* update duration/seq/flags of fragments */ |
| fragnum = 0; |
| |
| skb_queue_walk(&tx->skbs, skb) { |
| const __le16 morefrags = cpu_to_le16(IEEE80211_FCTL_MOREFRAGS); |
| |
| hdr = (void *)skb->data; |
| info = IEEE80211_SKB_CB(skb); |
| |
| if (!skb_queue_is_last(&tx->skbs, skb)) { |
| hdr->frame_control |= morefrags; |
| /* |
| * No multi-rate retries for fragmented frames, that |
| * would completely throw off the NAV at other STAs. |
| */ |
| info->control.rates[1].idx = -1; |
| info->control.rates[2].idx = -1; |
| info->control.rates[3].idx = -1; |
| BUILD_BUG_ON(IEEE80211_TX_MAX_RATES != 4); |
| info->flags &= ~IEEE80211_TX_CTL_RATE_CTRL_PROBE; |
| } else { |
| hdr->frame_control &= ~morefrags; |
| } |
| hdr->seq_ctrl |= cpu_to_le16(fragnum & IEEE80211_SCTL_FRAG); |
| fragnum++; |
| } |
| |
| return TX_CONTINUE; |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_stats(struct ieee80211_tx_data *tx) |
| { |
| struct sk_buff *skb; |
| int ac = -1; |
| |
| if (!tx->sta) |
| return TX_CONTINUE; |
| |
| skb_queue_walk(&tx->skbs, skb) { |
| ac = skb_get_queue_mapping(skb); |
| tx->sta->tx_stats.bytes[ac] += skb->len; |
| } |
| if (ac >= 0) |
| tx->sta->tx_stats.packets[ac]++; |
| |
| return TX_CONTINUE; |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_encrypt(struct ieee80211_tx_data *tx) |
| { |
| if (!tx->key) |
| return TX_CONTINUE; |
| |
| switch (tx->key->conf.cipher) { |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| return ieee80211_crypto_wep_encrypt(tx); |
| case WLAN_CIPHER_SUITE_TKIP: |
| return ieee80211_crypto_tkip_encrypt(tx); |
| case WLAN_CIPHER_SUITE_CCMP: |
| return ieee80211_crypto_ccmp_encrypt( |
| tx, IEEE80211_CCMP_MIC_LEN); |
| case WLAN_CIPHER_SUITE_CCMP_256: |
| return ieee80211_crypto_ccmp_encrypt( |
| tx, IEEE80211_CCMP_256_MIC_LEN); |
| case WLAN_CIPHER_SUITE_AES_CMAC: |
| return ieee80211_crypto_aes_cmac_encrypt(tx); |
| case WLAN_CIPHER_SUITE_BIP_CMAC_256: |
| return ieee80211_crypto_aes_cmac_256_encrypt(tx); |
| case WLAN_CIPHER_SUITE_BIP_GMAC_128: |
| case WLAN_CIPHER_SUITE_BIP_GMAC_256: |
| return ieee80211_crypto_aes_gmac_encrypt(tx); |
| case WLAN_CIPHER_SUITE_GCMP: |
| case WLAN_CIPHER_SUITE_GCMP_256: |
| return ieee80211_crypto_gcmp_encrypt(tx); |
| default: |
| return ieee80211_crypto_hw_encrypt(tx); |
| } |
| |
| return TX_DROP; |
| } |
| |
| static ieee80211_tx_result debug_noinline |
| ieee80211_tx_h_calculate_duration(struct ieee80211_tx_data *tx) |
| { |
| struct sk_buff *skb; |
| struct ieee80211_hdr *hdr; |
| int next_len; |
| bool group_addr; |
| |
| skb_queue_walk(&tx->skbs, skb) { |
| hdr = (void *) skb->data; |
| if (unlikely(ieee80211_is_pspoll(hdr->frame_control))) |
| break; /* must not overwrite AID */ |
| if (!skb_queue_is_last(&tx->skbs, skb)) { |
| struct sk_buff *next = skb_queue_next(&tx->skbs, skb); |
| next_len = next->len; |
| } else |
| next_len = 0; |
| group_addr = is_multicast_ether_addr(hdr->addr1); |
| |
| hdr->duration_id = |
| ieee80211_duration(tx, skb, group_addr, next_len); |
| } |
| |
| return TX_CONTINUE; |
| } |
| |
| /* actual transmit path */ |
| |
| static bool ieee80211_tx_prep_agg(struct ieee80211_tx_data *tx, |
| struct sk_buff *skb, |
| struct ieee80211_tx_info *info, |
| struct tid_ampdu_tx *tid_tx, |
| int tid) |
| { |
| bool queued = false; |
| bool reset_agg_timer = false; |
| struct sk_buff *purge_skb = NULL; |
| |
| if (test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { |
| info->flags |= IEEE80211_TX_CTL_AMPDU; |
| reset_agg_timer = true; |
| } else if (test_bit(HT_AGG_STATE_WANT_START, &tid_tx->state)) { |
| /* |
| * nothing -- this aggregation session is being started |
| * but that might still fail with the driver |
| */ |
| } else if (!tx->sta->sta.txq[tid]) { |
| spin_lock(&tx->sta->lock); |
| /* |
| * Need to re-check now, because we may get here |
| * |
| * 1) in the window during which the setup is actually |
| * already done, but not marked yet because not all |
| * packets are spliced over to the driver pending |
| * queue yet -- if this happened we acquire the lock |
| * either before or after the splice happens, but |
| * need to recheck which of these cases happened. |
| * |
| * 2) during session teardown, if the OPERATIONAL bit |
| * was cleared due to the teardown but the pointer |
| * hasn't been assigned NULL yet (or we loaded it |
| * before it was assigned) -- in this case it may |
| * now be NULL which means we should just let the |
| * packet pass through because splicing the frames |
| * back is already done. |
| */ |
| tid_tx = rcu_dereference_protected_tid_tx(tx->sta, tid); |
| |
| if (!tid_tx) { |
| /* do nothing, let packet pass through */ |
| } else if (test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { |
| info->flags |= IEEE80211_TX_CTL_AMPDU; |
| reset_agg_timer = true; |
| } else { |
| queued = true; |
| if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) { |
| clear_sta_flag(tx->sta, WLAN_STA_SP); |
| ps_dbg(tx->sta->sdata, |
| "STA %pM aid %d: SP frame queued, close the SP w/o telling the peer\n", |
| tx->sta->sta.addr, tx->sta->sta.aid); |
| } |
| info->control.vif = &tx->sdata->vif; |
| info->control.flags |= IEEE80211_TX_INTCFL_NEED_TXPROCESSING; |
| info->flags &= ~IEEE80211_TX_TEMPORARY_FLAGS; |
| __skb_queue_tail(&tid_tx->pending, skb); |
| if (skb_queue_len(&tid_tx->pending) > STA_MAX_TX_BUFFER) |
| purge_skb = __skb_dequeue(&tid_tx->pending); |
| } |
| spin_unlock(&tx->sta->lock); |
| |
| if (purge_skb) |
| ieee80211_free_txskb(&tx->local->hw, purge_skb); |
| } |
| |
| /* reset session timer */ |
| if (reset_agg_timer) |
| tid_tx->last_tx = jiffies; |
| |
| return queued; |
| } |
| |
| static void |
| ieee80211_aggr_check(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, |
| struct sk_buff *skb) |
| { |
| struct rate_control_ref *ref = sdata->local->rate_ctrl; |
| u16 tid; |
| |
| if (!ref || !(ref->ops->capa & RATE_CTRL_CAPA_AMPDU_TRIGGER)) |
| return; |
| |
| if (!sta || !sta->sta.ht_cap.ht_supported || |
| !sta->sta.wme || skb_get_queue_mapping(skb) == IEEE80211_AC_VO || |
| skb->protocol == sdata->control_port_protocol) |
| return; |
| |
| tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK; |
| if (likely(sta->ampdu_mlme.tid_tx[tid])) |
| return; |
| |
| ieee80211_start_tx_ba_session(&sta->sta, tid, 0); |
| } |
| |
| /* |
| * initialises @tx |
| * pass %NULL for the station if unknown, a valid pointer if known |
| * or an ERR_PTR() if the station is known not to exist |
| */ |
| static ieee80211_tx_result |
| ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_tx_data *tx, |
| struct sta_info *sta, struct sk_buff *skb) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_hdr *hdr; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| bool aggr_check = false; |
| int tid; |
| |
| memset(tx, 0, sizeof(*tx)); |
| tx->skb = skb; |
| tx->local = local; |
| tx->sdata = sdata; |
| __skb_queue_head_init(&tx->skbs); |
| |
| /* |
| * If this flag is set to true anywhere, and we get here, |
| * we are doing the needed processing, so remove the flag |
| * now. |
| */ |
| info->control.flags &= ~IEEE80211_TX_INTCFL_NEED_TXPROCESSING; |
| |
| hdr = (struct ieee80211_hdr *) skb->data; |
| |
| if (likely(sta)) { |
| if (!IS_ERR(sta)) |
| tx->sta = sta; |
| } else { |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { |
| tx->sta = rcu_dereference(sdata->u.vlan.sta); |
| if (!tx->sta && sdata->wdev.use_4addr) |
| return TX_DROP; |
| } else if (tx->sdata->control_port_protocol == tx->skb->protocol) { |
| tx->sta = sta_info_get_bss(sdata, hdr->addr1); |
| } |
| if (!tx->sta && !is_multicast_ether_addr(hdr->addr1)) { |
| tx->sta = sta_info_get(sdata, hdr->addr1); |
| aggr_check = true; |
| } |
| } |
| |
| if (tx->sta && ieee80211_is_data_qos(hdr->frame_control) && |
| !ieee80211_is_qos_nullfunc(hdr->frame_control) && |
| ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION) && |
| !ieee80211_hw_check(&local->hw, TX_AMPDU_SETUP_IN_HW)) { |
| struct tid_ampdu_tx *tid_tx; |
| |
| tid = ieee80211_get_tid(hdr); |
| tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]); |
| if (!tid_tx && aggr_check) { |
| ieee80211_aggr_check(sdata, tx->sta, skb); |
| tid_tx = rcu_dereference(tx->sta->ampdu_mlme.tid_tx[tid]); |
| } |
| |
| if (tid_tx) { |
| bool queued; |
| |
| queued = ieee80211_tx_prep_agg(tx, skb, info, |
| tid_tx, tid); |
| |
| if (unlikely(queued)) |
| return TX_QUEUED; |
| } |
| } |
| |
| if (is_multicast_ether_addr(hdr->addr1)) { |
| tx->flags &= ~IEEE80211_TX_UNICAST; |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; |
| } else |
| tx->flags |= IEEE80211_TX_UNICAST; |
| |
| if (!(info->flags & IEEE80211_TX_CTL_DONTFRAG)) { |
| if (!(tx->flags & IEEE80211_TX_UNICAST) || |
| skb->len + FCS_LEN <= local->hw.wiphy->frag_threshold || |
| info->flags & IEEE80211_TX_CTL_AMPDU) |
| info->flags |= IEEE80211_TX_CTL_DONTFRAG; |
| } |
| |
| if (!tx->sta) |
| info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; |
| else if (test_and_clear_sta_flag(tx->sta, WLAN_STA_CLEAR_PS_FILT)) { |
| info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; |
| ieee80211_check_fast_xmit(tx->sta); |
| } |
| |
| info->flags |= IEEE80211_TX_CTL_FIRST_FRAGMENT; |
| |
| return TX_CONTINUE; |
| } |
| |
| static struct txq_info *ieee80211_get_txq(struct ieee80211_local *local, |
| struct ieee80211_vif *vif, |
| struct sta_info *sta, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_txq *txq = NULL; |
| |
| if ((info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) || |
| (info->control.flags & IEEE80211_TX_CTRL_PS_RESPONSE)) |
| return NULL; |
| |
| if (!(info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) && |
| unlikely(!ieee80211_is_data_present(hdr->frame_control))) { |
| if ((!ieee80211_is_mgmt(hdr->frame_control) || |
| ieee80211_is_bufferable_mmpdu(hdr->frame_control) || |
| vif->type == NL80211_IFTYPE_STATION) && |
| sta && sta->uploaded) { |
| /* |
| * This will be NULL if the driver didn't set the |
| * opt-in hardware flag. |
| */ |
| txq = sta->sta.txq[IEEE80211_NUM_TIDS]; |
| } |
| } else if (sta) { |
| u8 tid = skb->priority & IEEE80211_QOS_CTL_TID_MASK; |
| |
| if (!sta->uploaded) |
| return NULL; |
| |
| txq = sta->sta.txq[tid]; |
| } else if (vif) { |
| txq = vif->txq; |
| } |
| |
| if (!txq) |
| return NULL; |
| |
| return to_txq_info(txq); |
| } |
| |
| static void ieee80211_set_skb_enqueue_time(struct sk_buff *skb) |
| { |
| IEEE80211_SKB_CB(skb)->control.enqueue_time = codel_get_time(); |
| } |
| |
| static u32 codel_skb_len_func(const struct sk_buff *skb) |
| { |
| return skb->len; |
| } |
| |
| static codel_time_t codel_skb_time_func(const struct sk_buff *skb) |
| { |
| const struct ieee80211_tx_info *info; |
| |
| info = (const struct ieee80211_tx_info *)skb->cb; |
| return info->control.enqueue_time; |
| } |
| |
| static struct sk_buff *codel_dequeue_func(struct codel_vars *cvars, |
| void *ctx) |
| { |
| struct ieee80211_local *local; |
| struct txq_info *txqi; |
| struct fq *fq; |
| struct fq_flow *flow; |
| |
| txqi = ctx; |
| local = vif_to_sdata(txqi->txq.vif)->local; |
| fq = &local->fq; |
| |
| if (cvars == &txqi->def_cvars) |
| flow = &txqi->tin.default_flow; |
| else |
| flow = &fq->flows[cvars - local->cvars]; |
| |
| return fq_flow_dequeue(fq, flow); |
| } |
| |
| static void codel_drop_func(struct sk_buff *skb, |
| void *ctx) |
| { |
| struct ieee80211_local *local; |
| struct ieee80211_hw *hw; |
| struct txq_info *txqi; |
| |
| txqi = ctx; |
| local = vif_to_sdata(txqi->txq.vif)->local; |
| hw = &local->hw; |
| |
| ieee80211_free_txskb(hw, skb); |
| } |
| |
| static struct sk_buff *fq_tin_dequeue_func(struct fq *fq, |
| struct fq_tin *tin, |
| struct fq_flow *flow) |
| { |
| struct ieee80211_local *local; |
| struct txq_info *txqi; |
| struct codel_vars *cvars; |
| struct codel_params *cparams; |
| struct codel_stats *cstats; |
| |
| local = container_of(fq, struct ieee80211_local, fq); |
| txqi = container_of(tin, struct txq_info, tin); |
| cstats = &txqi->cstats; |
| |
| if (txqi->txq.sta) { |
| struct sta_info *sta = container_of(txqi->txq.sta, |
| struct sta_info, sta); |
| cparams = &sta->cparams; |
| } else { |
| cparams = &local->cparams; |
| } |
| |
| if (flow == &tin->default_flow) |
| cvars = &txqi->def_cvars; |
| else |
| cvars = &local->cvars[flow - fq->flows]; |
| |
| return codel_dequeue(txqi, |
| &flow->backlog, |
| cparams, |
| cvars, |
| cstats, |
| codel_skb_len_func, |
| codel_skb_time_func, |
| codel_drop_func, |
| codel_dequeue_func); |
| } |
| |
| static void fq_skb_free_func(struct fq *fq, |
| struct fq_tin *tin, |
| struct fq_flow *flow, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_local *local; |
| |
| local = container_of(fq, struct ieee80211_local, fq); |
| ieee80211_free_txskb(&local->hw, skb); |
| } |
| |
| static void ieee80211_txq_enqueue(struct ieee80211_local *local, |
| struct txq_info *txqi, |
| struct sk_buff *skb) |
| { |
| struct fq *fq = &local->fq; |
| struct fq_tin *tin = &txqi->tin; |
| u32 flow_idx = fq_flow_idx(fq, skb); |
| |
| ieee80211_set_skb_enqueue_time(skb); |
| |
| spin_lock_bh(&fq->lock); |
| /* |
| * For management frames, don't really apply codel etc., |
| * we don't want to apply any shaping or anything we just |
| * want to simplify the driver API by having them on the |
| * txqi. |
| */ |
| if (unlikely(txqi->txq.tid == IEEE80211_NUM_TIDS)) { |
| IEEE80211_SKB_CB(skb)->control.flags |= |
| IEEE80211_TX_INTCFL_NEED_TXPROCESSING; |
| __skb_queue_tail(&txqi->frags, skb); |
| } else { |
| fq_tin_enqueue(fq, tin, flow_idx, skb, |
| fq_skb_free_func); |
| } |
| spin_unlock_bh(&fq->lock); |
| } |
| |
| static bool fq_vlan_filter_func(struct fq *fq, struct fq_tin *tin, |
| struct fq_flow *flow, struct sk_buff *skb, |
| void *data) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| |
| return info->control.vif == data; |
| } |
| |
| void ieee80211_txq_remove_vlan(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| struct fq *fq = &local->fq; |
| struct txq_info *txqi; |
| struct fq_tin *tin; |
| struct ieee80211_sub_if_data *ap; |
| |
| if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP_VLAN)) |
| return; |
| |
| ap = container_of(sdata->bss, struct ieee80211_sub_if_data, u.ap); |
| |
| if (!ap->vif.txq) |
| return; |
| |
| txqi = to_txq_info(ap->vif.txq); |
| tin = &txqi->tin; |
| |
| spin_lock_bh(&fq->lock); |
| fq_tin_filter(fq, tin, fq_vlan_filter_func, &sdata->vif, |
| fq_skb_free_func); |
| spin_unlock_bh(&fq->lock); |
| } |
| |
| void ieee80211_txq_init(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, |
| struct txq_info *txqi, int tid) |
| { |
| fq_tin_init(&txqi->tin); |
| codel_vars_init(&txqi->def_cvars); |
| codel_stats_init(&txqi->cstats); |
| __skb_queue_head_init(&txqi->frags); |
| RB_CLEAR_NODE(&txqi->schedule_order); |
| |
| txqi->txq.vif = &sdata->vif; |
| |
| if (!sta) { |
| sdata->vif.txq = &txqi->txq; |
| txqi->txq.tid = 0; |
| txqi->txq.ac = IEEE80211_AC_BE; |
| |
| return; |
| } |
| |
| if (tid == IEEE80211_NUM_TIDS) { |
| if (sdata->vif.type == NL80211_IFTYPE_STATION) { |
| /* Drivers need to opt in to the management MPDU TXQ */ |
| if (!ieee80211_hw_check(&sdata->local->hw, |
| STA_MMPDU_TXQ)) |
| return; |
| } else if (!ieee80211_hw_check(&sdata->local->hw, |
| BUFF_MMPDU_TXQ)) { |
| /* Drivers need to opt in to the bufferable MMPDU TXQ */ |
| return; |
| } |
| txqi->txq.ac = IEEE80211_AC_VO; |
| } else { |
| txqi->txq.ac = ieee80211_ac_from_tid(tid); |
| } |
| |
| txqi->txq.sta = &sta->sta; |
| txqi->txq.tid = tid; |
| sta->sta.txq[tid] = &txqi->txq; |
| } |
| |
| void ieee80211_txq_purge(struct ieee80211_local *local, |
| struct txq_info *txqi) |
| { |
| struct fq *fq = &local->fq; |
| struct fq_tin *tin = &txqi->tin; |
| |
| spin_lock_bh(&fq->lock); |
| fq_tin_reset(fq, tin, fq_skb_free_func); |
| ieee80211_purge_tx_queue(&local->hw, &txqi->frags); |
| spin_unlock_bh(&fq->lock); |
| |
| ieee80211_unschedule_txq(&local->hw, &txqi->txq, true); |
| } |
| |
| void ieee80211_txq_set_params(struct ieee80211_local *local) |
| { |
| if (local->hw.wiphy->txq_limit) |
| local->fq.limit = local->hw.wiphy->txq_limit; |
| else |
| local->hw.wiphy->txq_limit = local->fq.limit; |
| |
| if (local->hw.wiphy->txq_memory_limit) |
| local->fq.memory_limit = local->hw.wiphy->txq_memory_limit; |
| else |
| local->hw.wiphy->txq_memory_limit = local->fq.memory_limit; |
| |
| if (local->hw.wiphy->txq_quantum) |
| local->fq.quantum = local->hw.wiphy->txq_quantum; |
| else |
| local->hw.wiphy->txq_quantum = local->fq.quantum; |
| } |
| |
| int ieee80211_txq_setup_flows(struct ieee80211_local *local) |
| { |
| struct fq *fq = &local->fq; |
| int ret; |
| int i; |
| bool supp_vht = false; |
| enum nl80211_band band; |
| |
| if (!local->ops->wake_tx_queue) |
| return 0; |
| |
| ret = fq_init(fq, 4096); |
| if (ret) |
| return ret; |
| |
| /* |
| * If the hardware doesn't support VHT, it is safe to limit the maximum |
| * queue size. 4 Mbytes is 64 max-size aggregates in 802.11n. |
| */ |
| for (band = 0; band < NUM_NL80211_BANDS; band++) { |
| struct ieee80211_supported_band *sband; |
| |
| sband = local->hw.wiphy->bands[band]; |
| if (!sband) |
| continue; |
| |
| supp_vht = supp_vht || sband->vht_cap.vht_supported; |
| } |
| |
| if (!supp_vht) |
| fq->memory_limit = 4 << 20; /* 4 Mbytes */ |
| |
| codel_params_init(&local->cparams); |
| local->cparams.interval = MS2TIME(100); |
| local->cparams.target = MS2TIME(20); |
| local->cparams.ecn = true; |
| |
| local->cvars = kcalloc(fq->flows_cnt, sizeof(local->cvars[0]), |
| GFP_KERNEL); |
| if (!local->cvars) { |
| spin_lock_bh(&fq->lock); |
| fq_reset(fq, fq_skb_free_func); |
| spin_unlock_bh(&fq->lock); |
| return -ENOMEM; |
| } |
| |
| for (i = 0; i < fq->flows_cnt; i++) |
| codel_vars_init(&local->cvars[i]); |
| |
| ieee80211_txq_set_params(local); |
| |
| return 0; |
| } |
| |
| void ieee80211_txq_teardown_flows(struct ieee80211_local *local) |
| { |
| struct fq *fq = &local->fq; |
| |
| if (!local->ops->wake_tx_queue) |
| return; |
| |
| kfree(local->cvars); |
| local->cvars = NULL; |
| |
| spin_lock_bh(&fq->lock); |
| fq_reset(fq, fq_skb_free_func); |
| spin_unlock_bh(&fq->lock); |
| } |
| |
| static bool ieee80211_queue_skb(struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_vif *vif; |
| struct txq_info *txqi; |
| |
| if (!local->ops->wake_tx_queue || |
| sdata->vif.type == NL80211_IFTYPE_MONITOR) |
| return false; |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) |
| sdata = container_of(sdata->bss, |
| struct ieee80211_sub_if_data, u.ap); |
| |
| vif = &sdata->vif; |
| txqi = ieee80211_get_txq(local, vif, sta, skb); |
| |
| if (!txqi) |
| return false; |
| |
| ieee80211_txq_enqueue(local, txqi, skb); |
| |
| schedule_and_wake_txq(local, txqi); |
| |
| return true; |
| } |
| |
| static bool ieee80211_tx_frags(struct ieee80211_local *local, |
| struct ieee80211_vif *vif, |
| struct sta_info *sta, |
| struct sk_buff_head *skbs, |
| bool txpending) |
| { |
| struct ieee80211_tx_control control = {}; |
| struct sk_buff *skb, *tmp; |
| unsigned long flags; |
| |
| skb_queue_walk_safe(skbs, skb, tmp) { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| int q = info->hw_queue; |
| |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG |
| if (WARN_ON_ONCE(q >= local->hw.queues)) { |
| __skb_unlink(skb, skbs); |
| ieee80211_free_txskb(&local->hw, skb); |
| continue; |
| } |
| #endif |
| |
| spin_lock_irqsave(&local->queue_stop_reason_lock, flags); |
| if (local->queue_stop_reasons[q] || |
| (!txpending && !skb_queue_empty(&local->pending[q]))) { |
| if (unlikely(info->flags & |
| IEEE80211_TX_INTFL_OFFCHAN_TX_OK)) { |
| if (local->queue_stop_reasons[q] & |
| ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL)) { |
| /* |
| * Drop off-channel frames if queues |
| * are stopped for any reason other |
| * than off-channel operation. Never |
| * queue them. |
| */ |
| spin_unlock_irqrestore( |
| &local->queue_stop_reason_lock, |
| flags); |
| ieee80211_purge_tx_queue(&local->hw, |
| skbs); |
| return true; |
| } |
| } else { |
| |
| /* |
| * Since queue is stopped, queue up frames for |
| * later transmission from the tx-pending |
| * tasklet when the queue is woken again. |
| */ |
| if (txpending) |
| skb_queue_splice_init(skbs, |
| &local->pending[q]); |
| else |
| skb_queue_splice_tail_init(skbs, |
| &local->pending[q]); |
| |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, |
| flags); |
| return false; |
| } |
| } |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); |
| |
| info->control.vif = vif; |
| control.sta = sta ? &sta->sta : NULL; |
| |
| __skb_unlink(skb, skbs); |
| drv_tx(local, &control, skb); |
| } |
| |
| return true; |
| } |
| |
| /* |
| * Returns false if the frame couldn't be transmitted but was queued instead. |
| */ |
| static bool __ieee80211_tx(struct ieee80211_local *local, |
| struct sk_buff_head *skbs, int led_len, |
| struct sta_info *sta, bool txpending) |
| { |
| struct ieee80211_tx_info *info; |
| struct ieee80211_sub_if_data *sdata; |
| struct ieee80211_vif *vif; |
| struct sk_buff *skb; |
| bool result; |
| __le16 fc; |
| |
| if (WARN_ON(skb_queue_empty(skbs))) |
| return true; |
| |
| skb = skb_peek(skbs); |
| fc = ((struct ieee80211_hdr *)skb->data)->frame_control; |
| info = IEEE80211_SKB_CB(skb); |
| sdata = vif_to_sdata(info->control.vif); |
| if (sta && !sta->uploaded) |
| sta = NULL; |
| |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_MONITOR: |
| if (sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) { |
| vif = &sdata->vif; |
| break; |
| } |
| sdata = rcu_dereference(local->monitor_sdata); |
| if (sdata) { |
| vif = &sdata->vif; |
| info->hw_queue = |
| vif->hw_queue[skb_get_queue_mapping(skb)]; |
| } else if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) { |
| ieee80211_purge_tx_queue(&local->hw, skbs); |
| return true; |
| } else |
| vif = NULL; |
| break; |
| case NL80211_IFTYPE_AP_VLAN: |
| sdata = container_of(sdata->bss, |
| struct ieee80211_sub_if_data, u.ap); |
| fallthrough; |
| default: |
| vif = &sdata->vif; |
| break; |
| } |
| |
| result = ieee80211_tx_frags(local, vif, sta, skbs, txpending); |
| |
| ieee80211_tpt_led_trig_tx(local, fc, led_len); |
| |
| WARN_ON_ONCE(!skb_queue_empty(skbs)); |
| |
| return result; |
| } |
| |
| /* |
| * Invoke TX handlers, return 0 on success and non-zero if the |
| * frame was dropped or queued. |
| * |
| * The handlers are split into an early and late part. The latter is everything |
| * that can be sensitive to reordering, and will be deferred to after packets |
| * are dequeued from the intermediate queues (when they are enabled). |
| */ |
| static int invoke_tx_handlers_early(struct ieee80211_tx_data *tx) |
| { |
| ieee80211_tx_result res = TX_DROP; |
| |
| #define CALL_TXH(txh) \ |
| do { \ |
| res = txh(tx); \ |
| if (res != TX_CONTINUE) \ |
| goto txh_done; \ |
| } while (0) |
| |
| CALL_TXH(ieee80211_tx_h_dynamic_ps); |
| CALL_TXH(ieee80211_tx_h_check_assoc); |
| CALL_TXH(ieee80211_tx_h_ps_buf); |
| CALL_TXH(ieee80211_tx_h_check_control_port_protocol); |
| CALL_TXH(ieee80211_tx_h_select_key); |
| |
| txh_done: |
| if (unlikely(res == TX_DROP)) { |
| I802_DEBUG_INC(tx->local->tx_handlers_drop); |
| if (tx->skb) |
| ieee80211_free_txskb(&tx->local->hw, tx->skb); |
| else |
| ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs); |
| return -1; |
| } else if (unlikely(res == TX_QUEUED)) { |
| I802_DEBUG_INC(tx->local->tx_handlers_queued); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * Late handlers can be called while the sta lock is held. Handlers that can |
| * cause packets to be generated will cause deadlock! |
| */ |
| static int invoke_tx_handlers_late(struct ieee80211_tx_data *tx) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(tx->skb); |
| ieee80211_tx_result res = TX_CONTINUE; |
| |
| if (unlikely(info->flags & IEEE80211_TX_INTFL_RETRANSMISSION)) { |
| __skb_queue_tail(&tx->skbs, tx->skb); |
| tx->skb = NULL; |
| goto txh_done; |
| } |
| |
| if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL)) |
| CALL_TXH(ieee80211_tx_h_rate_ctrl); |
| |
| CALL_TXH(ieee80211_tx_h_michael_mic_add); |
| CALL_TXH(ieee80211_tx_h_sequence); |
| CALL_TXH(ieee80211_tx_h_fragment); |
| /* handlers after fragment must be aware of tx info fragmentation! */ |
| CALL_TXH(ieee80211_tx_h_stats); |
| CALL_TXH(ieee80211_tx_h_encrypt); |
| if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL)) |
| CALL_TXH(ieee80211_tx_h_calculate_duration); |
| #undef CALL_TXH |
| |
| txh_done: |
| if (unlikely(res == TX_DROP)) { |
| I802_DEBUG_INC(tx->local->tx_handlers_drop); |
| if (tx->skb) |
| ieee80211_free_txskb(&tx->local->hw, tx->skb); |
| else |
| ieee80211_purge_tx_queue(&tx->local->hw, &tx->skbs); |
| return -1; |
| } else if (unlikely(res == TX_QUEUED)) { |
| I802_DEBUG_INC(tx->local->tx_handlers_queued); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int invoke_tx_handlers(struct ieee80211_tx_data *tx) |
| { |
| int r = invoke_tx_handlers_early(tx); |
| |
| if (r) |
| return r; |
| return invoke_tx_handlers_late(tx); |
| } |
| |
| bool ieee80211_tx_prepare_skb(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, struct sk_buff *skb, |
| int band, struct ieee80211_sta **sta) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_tx_data tx; |
| struct sk_buff *skb2; |
| |
| if (ieee80211_tx_prepare(sdata, &tx, NULL, skb) == TX_DROP) |
| return false; |
| |
| info->band = band; |
| info->control.vif = vif; |
| info->hw_queue = vif->hw_queue[skb_get_queue_mapping(skb)]; |
| |
| if (invoke_tx_handlers(&tx)) |
| return false; |
| |
| if (sta) { |
| if (tx.sta) |
| *sta = &tx.sta->sta; |
| else |
| *sta = NULL; |
| } |
| |
| /* this function isn't suitable for fragmented data frames */ |
| skb2 = __skb_dequeue(&tx.skbs); |
| if (WARN_ON(skb2 != skb || !skb_queue_empty(&tx.skbs))) { |
| ieee80211_free_txskb(hw, skb2); |
| ieee80211_purge_tx_queue(hw, &tx.skbs); |
| return false; |
| } |
| |
| return true; |
| } |
| EXPORT_SYMBOL(ieee80211_tx_prepare_skb); |
| |
| /* |
| * Returns false if the frame couldn't be transmitted but was queued instead. |
| */ |
| static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, struct sk_buff *skb, |
| bool txpending) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_tx_data tx; |
| ieee80211_tx_result res_prepare; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| bool result = true; |
| int led_len; |
| |
| if (unlikely(skb->len < 10)) { |
| dev_kfree_skb(skb); |
| return true; |
| } |
| |
| /* initialises tx */ |
| led_len = skb->len; |
| res_prepare = ieee80211_tx_prepare(sdata, &tx, sta, skb); |
| |
| if (unlikely(res_prepare == TX_DROP)) { |
| ieee80211_free_txskb(&local->hw, skb); |
| return true; |
| } else if (unlikely(res_prepare == TX_QUEUED)) { |
| return true; |
| } |
| |
| /* set up hw_queue value early */ |
| if (!(info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) || |
| !ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) |
| info->hw_queue = |
| sdata->vif.hw_queue[skb_get_queue_mapping(skb)]; |
| |
| if (invoke_tx_handlers_early(&tx)) |
| return true; |
| |
| if (ieee80211_queue_skb(local, sdata, tx.sta, tx.skb)) |
| return true; |
| |
| if (!invoke_tx_handlers_late(&tx)) |
| result = __ieee80211_tx(local, &tx.skbs, led_len, |
| tx.sta, txpending); |
| |
| return result; |
| } |
| |
| /* device xmit handlers */ |
| |
| enum ieee80211_encrypt { |
| ENCRYPT_NO, |
| ENCRYPT_MGMT, |
| ENCRYPT_DATA, |
| }; |
| |
| static int ieee80211_skb_resize(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, |
| int head_need, |
| enum ieee80211_encrypt encrypt) |
| { |
| struct ieee80211_local *local = sdata->local; |
| bool enc_tailroom; |
| int tail_need = 0; |
| |
| enc_tailroom = encrypt == ENCRYPT_MGMT || |
| (encrypt == ENCRYPT_DATA && |
| sdata->crypto_tx_tailroom_needed_cnt); |
| |
| if (enc_tailroom) { |
| tail_need = IEEE80211_ENCRYPT_TAILROOM; |
| tail_need -= skb_tailroom(skb); |
| tail_need = max_t(int, tail_need, 0); |
| } |
| |
| if (skb_cloned(skb) && |
| (!ieee80211_hw_check(&local->hw, SUPPORTS_CLONED_SKBS) || |
| !skb_clone_writable(skb, ETH_HLEN) || enc_tailroom)) |
| I802_DEBUG_INC(local->tx_expand_skb_head_cloned); |
| else if (head_need || tail_need) |
| I802_DEBUG_INC(local->tx_expand_skb_head); |
| else |
| return 0; |
| |
| if (pskb_expand_head(skb, head_need, tail_need, GFP_ATOMIC)) { |
| wiphy_debug(local->hw.wiphy, |
| "failed to reallocate TX buffer\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| void ieee80211_xmit(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, struct sk_buff *skb) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; |
| int headroom; |
| enum ieee80211_encrypt encrypt; |
| |
| if (info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT) |
| encrypt = ENCRYPT_NO; |
| else if (ieee80211_is_mgmt(hdr->frame_control)) |
| encrypt = ENCRYPT_MGMT; |
| else |
| encrypt = ENCRYPT_DATA; |
| |
| headroom = local->tx_headroom; |
| if (encrypt != ENCRYPT_NO) |
| headroom += sdata->encrypt_headroom; |
| headroom -= skb_headroom(skb); |
| headroom = max_t(int, 0, headroom); |
| |
| if (ieee80211_skb_resize(sdata, skb, headroom, encrypt)) { |
| ieee80211_free_txskb(&local->hw, skb); |
| return; |
| } |
| |
| /* reload after potential resize */ |
| hdr = (struct ieee80211_hdr *) skb->data; |
| info->control.vif = &sdata->vif; |
| |
| if (ieee80211_vif_is_mesh(&sdata->vif)) { |
| if (ieee80211_is_data(hdr->frame_control) && |
| is_unicast_ether_addr(hdr->addr1)) { |
| if (mesh_nexthop_resolve(sdata, skb)) |
| return; /* skb queued: don't free */ |
| } else { |
| ieee80211_mps_set_frame_flags(sdata, NULL, hdr); |
| } |
| } |
| |
| ieee80211_set_qos_hdr(sdata, skb); |
| ieee80211_tx(sdata, sta, skb, false); |
| } |
| |
| static bool ieee80211_validate_radiotap_len(struct sk_buff *skb) |
| { |
| struct ieee80211_radiotap_header *rthdr = |
| (struct ieee80211_radiotap_header *)skb->data; |
| |
| /* check for not even having the fixed radiotap header part */ |
| if (unlikely(skb->len < sizeof(struct ieee80211_radiotap_header))) |
| return false; /* too short to be possibly valid */ |
| |
| /* is it a header version we can trust to find length from? */ |
| if (unlikely(rthdr->it_version)) |
| return false; /* only version 0 is supported */ |
| |
| /* does the skb contain enough to deliver on the alleged length? */ |
| if (unlikely(skb->len < ieee80211_get_radiotap_len(skb->data))) |
| return false; /* skb too short for claimed rt header extent */ |
| |
| return true; |
| } |
| |
| bool ieee80211_parse_tx_radiotap(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_radiotap_iterator iterator; |
| struct ieee80211_radiotap_header *rthdr = |
| (struct ieee80211_radiotap_header *) skb->data; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| int ret = ieee80211_radiotap_iterator_init(&iterator, rthdr, skb->len, |
| NULL); |
| u16 txflags; |
| u16 rate = 0; |
| bool rate_found = false; |
| u8 rate_retries = 0; |
| u16 rate_flags = 0; |
| u8 mcs_known, mcs_flags, mcs_bw; |
| u16 vht_known; |
| u8 vht_mcs = 0, vht_nss = 0; |
| int i; |
| |
| if (!ieee80211_validate_radiotap_len(skb)) |
| return false; |
| |
| info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | |
| IEEE80211_TX_CTL_DONTFRAG; |
| |
| /* |
| * for every radiotap entry that is present |
| * (ieee80211_radiotap_iterator_next returns -ENOENT when no more |
| * entries present, or -EINVAL on error) |
| */ |
| |
| while (!ret) { |
| ret = ieee80211_radiotap_iterator_next(&iterator); |
| |
| if (ret) |
| continue; |
| |
| /* see if this argument is something we can use */ |
| switch (iterator.this_arg_index) { |
| /* |
| * You must take care when dereferencing iterator.this_arg |
| * for multibyte types... the pointer is not aligned. Use |
| * get_unaligned((type *)iterator.this_arg) to dereference |
| * iterator.this_arg for type "type" safely on all arches. |
| */ |
| case IEEE80211_RADIOTAP_FLAGS: |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FCS) { |
| /* |
| * this indicates that the skb we have been |
| * handed has the 32-bit FCS CRC at the end... |
| * we should react to that by snipping it off |
| * because it will be recomputed and added |
| * on transmission |
| */ |
| if (skb->len < (iterator._max_length + FCS_LEN)) |
| return false; |
| |
| skb_trim(skb, skb->len - FCS_LEN); |
| } |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_WEP) |
| info->flags &= ~IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| if (*iterator.this_arg & IEEE80211_RADIOTAP_F_FRAG) |
| info->flags &= ~IEEE80211_TX_CTL_DONTFRAG; |
| break; |
| |
| case IEEE80211_RADIOTAP_TX_FLAGS: |
| txflags = get_unaligned_le16(iterator.this_arg); |
| if (txflags & IEEE80211_RADIOTAP_F_TX_NOACK) |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; |
| if (txflags & IEEE80211_RADIOTAP_F_TX_NOSEQNO) |
| info->control.flags |= IEEE80211_TX_CTRL_NO_SEQNO; |
| if (txflags & IEEE80211_RADIOTAP_F_TX_ORDER) |
| info->control.flags |= |
| IEEE80211_TX_CTRL_DONT_REORDER; |
| break; |
| |
| case IEEE80211_RADIOTAP_RATE: |
| rate = *iterator.this_arg; |
| rate_flags = 0; |
| rate_found = true; |
| break; |
| |
| case IEEE80211_RADIOTAP_DATA_RETRIES: |
| rate_retries = *iterator.this_arg; |
| break; |
| |
| case IEEE80211_RADIOTAP_MCS: |
| mcs_known = iterator.this_arg[0]; |
| mcs_flags = iterator.this_arg[1]; |
| if (!(mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_MCS)) |
| break; |
| |
| rate_found = true; |
| rate = iterator.this_arg[2]; |
| rate_flags = IEEE80211_TX_RC_MCS; |
| |
| if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_GI && |
| mcs_flags & IEEE80211_RADIOTAP_MCS_SGI) |
| rate_flags |= IEEE80211_TX_RC_SHORT_GI; |
| |
| mcs_bw = mcs_flags & IEEE80211_RADIOTAP_MCS_BW_MASK; |
| if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_BW && |
| mcs_bw == IEEE80211_RADIOTAP_MCS_BW_40) |
| rate_flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; |
| |
| if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_FEC && |
| mcs_flags & IEEE80211_RADIOTAP_MCS_FEC_LDPC) |
| info->flags |= IEEE80211_TX_CTL_LDPC; |
| |
| if (mcs_known & IEEE80211_RADIOTAP_MCS_HAVE_STBC) { |
| u8 stbc = u8_get_bits(mcs_flags, |
| IEEE80211_RADIOTAP_MCS_STBC_MASK); |
| |
| info->flags |= |
| u32_encode_bits(stbc, |
| IEEE80211_TX_CTL_STBC); |
| } |
| break; |
| |
| case IEEE80211_RADIOTAP_VHT: |
| vht_known = get_unaligned_le16(iterator.this_arg); |
| rate_found = true; |
| |
| rate_flags = IEEE80211_TX_RC_VHT_MCS; |
| if ((vht_known & IEEE80211_RADIOTAP_VHT_KNOWN_GI) && |
| (iterator.this_arg[2] & |
| IEEE80211_RADIOTAP_VHT_FLAG_SGI)) |
| rate_flags |= IEEE80211_TX_RC_SHORT_GI; |
| if (vht_known & |
| IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH) { |
| if (iterator.this_arg[3] == 1) |
| rate_flags |= |
| IEEE80211_TX_RC_40_MHZ_WIDTH; |
| else if (iterator.this_arg[3] == 4) |
| rate_flags |= |
| IEEE80211_TX_RC_80_MHZ_WIDTH; |
| else if (iterator.this_arg[3] == 11) |
| rate_flags |= |
| IEEE80211_TX_RC_160_MHZ_WIDTH; |
| } |
| |
| vht_mcs = iterator.this_arg[4] >> 4; |
| vht_nss = iterator.this_arg[4] & 0xF; |
| break; |
| |
| /* |
| * Please update the file |
| * Documentation/networking/mac80211-injection.rst |
| * when parsing new fields here. |
| */ |
| |
| default: |
| break; |
| } |
| } |
| |
| if (ret != -ENOENT) /* ie, if we didn't simply run out of fields */ |
| return false; |
| |
| if (rate_found) { |
| struct ieee80211_supported_band *sband = |
| local->hw.wiphy->bands[info->band]; |
| |
| info->control.flags |= IEEE80211_TX_CTRL_RATE_INJECT; |
| |
| for (i = 0; i < IEEE80211_TX_MAX_RATES; i++) { |
| info->control.rates[i].idx = -1; |
| info->control.rates[i].flags = 0; |
| info->control.rates[i].count = 0; |
| } |
| |
| if (rate_flags & IEEE80211_TX_RC_MCS) { |
| info->control.rates[0].idx = rate; |
| } else if (rate_flags & IEEE80211_TX_RC_VHT_MCS) { |
| ieee80211_rate_set_vht(info->control.rates, vht_mcs, |
| vht_nss); |
| } else if (sband) { |
| for (i = 0; i < sband->n_bitrates; i++) { |
| if (rate * 5 != sband->bitrates[i].bitrate) |
| continue; |
| |
| info->control.rates[0].idx = i; |
| break; |
| } |
| } |
| |
| if (info->control.rates[0].idx < 0) |
| info->control.flags &= ~IEEE80211_TX_CTRL_RATE_INJECT; |
| |
| info->control.rates[0].flags = rate_flags; |
| info->control.rates[0].count = min_t(u8, rate_retries + 1, |
| local->hw.max_rate_tries); |
| } |
| |
| return true; |
| } |
| |
| netdev_tx_t ieee80211_monitor_start_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_hdr *hdr; |
| struct ieee80211_sub_if_data *tmp_sdata, *sdata; |
| struct cfg80211_chan_def *chandef; |
| u16 len_rthdr; |
| int hdrlen; |
| |
| memset(info, 0, sizeof(*info)); |
| info->flags = IEEE80211_TX_CTL_REQ_TX_STATUS | |
| IEEE80211_TX_CTL_INJECTED; |
| |
| /* Sanity-check the length of the radiotap header */ |
| if (!ieee80211_validate_radiotap_len(skb)) |
| goto fail; |
| |
| /* we now know there is a radiotap header with a length we can use */ |
| len_rthdr = ieee80211_get_radiotap_len(skb->data); |
| |
| /* |
| * fix up the pointers accounting for the radiotap |
| * header still being in there. We are being given |
| * a precooked IEEE80211 header so no need for |
| * normal processing |
| */ |
| skb_set_mac_header(skb, len_rthdr); |
| /* |
| * these are just fixed to the end of the rt area since we |
| * don't have any better information and at this point, nobody cares |
| */ |
| skb_set_network_header(skb, len_rthdr); |
| skb_set_transport_header(skb, len_rthdr); |
| |
| if (skb->len < len_rthdr + 2) |
| goto fail; |
| |
| hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr); |
| hdrlen = ieee80211_hdrlen(hdr->frame_control); |
| |
| if (skb->len < len_rthdr + hdrlen) |
| goto fail; |
| |
| /* |
| * Initialize skb->protocol if the injected frame is a data frame |
| * carrying a rfc1042 header |
| */ |
| if (ieee80211_is_data(hdr->frame_control) && |
| skb->len >= len_rthdr + hdrlen + sizeof(rfc1042_header) + 2) { |
| u8 *payload = (u8 *)hdr + hdrlen; |
| |
| if (ether_addr_equal(payload, rfc1042_header)) |
| skb->protocol = cpu_to_be16((payload[6] << 8) | |
| payload[7]); |
| } |
| |
| rcu_read_lock(); |
| |
| /* |
| * We process outgoing injected frames that have a local address |
| * we handle as though they are non-injected frames. |
| * This code here isn't entirely correct, the local MAC address |
| * isn't always enough to find the interface to use; for proper |
| * VLAN support we have an nl80211-based mechanism. |
| * |
| * This is necessary, for example, for old hostapd versions that |
| * don't use nl80211-based management TX/RX. |
| */ |
| sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| |
| list_for_each_entry_rcu(tmp_sdata, &local->interfaces, list) { |
| if (!ieee80211_sdata_running(tmp_sdata)) |
| continue; |
| if (tmp_sdata->vif.type == NL80211_IFTYPE_MONITOR || |
| tmp_sdata->vif.type == NL80211_IFTYPE_AP_VLAN) |
| continue; |
| if (ether_addr_equal(tmp_sdata->vif.addr, hdr->addr2)) { |
| sdata = tmp_sdata; |
| break; |
| } |
| } |
| |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (!chanctx_conf) { |
| tmp_sdata = rcu_dereference(local->monitor_sdata); |
| if (tmp_sdata) |
| chanctx_conf = |
| rcu_dereference(tmp_sdata->vif.chanctx_conf); |
| } |
| |
| if (chanctx_conf) |
| chandef = &chanctx_conf->def; |
| else if (!local->use_chanctx) |
| chandef = &local->_oper_chandef; |
| else |
| goto fail_rcu; |
| |
| /* |
| * Frame injection is not allowed if beaconing is not allowed |
| * or if we need radar detection. Beaconing is usually not allowed when |
| * the mode or operation (Adhoc, AP, Mesh) does not support DFS. |
| * Passive scan is also used in world regulatory domains where |
| * your country is not known and as such it should be treated as |
| * NO TX unless the channel is explicitly allowed in which case |
| * your current regulatory domain would not have the passive scan |
| * flag. |
| * |
| * Since AP mode uses monitor interfaces to inject/TX management |
| * frames we can make AP mode the exception to this rule once it |
| * supports radar detection as its implementation can deal with |
| * radar detection by itself. We can do that later by adding a |
| * monitor flag interfaces used for AP support. |
| */ |
| if (!cfg80211_reg_can_beacon(local->hw.wiphy, chandef, |
| sdata->vif.type)) |
| goto fail_rcu; |
| |
| info->band = chandef->chan->band; |
| |
| /* Initialize skb->priority according to frame type and TID class, |
| * with respect to the sub interface that the frame will actually |
| * be transmitted on. If the DONT_REORDER flag is set, the original |
| * skb-priority is preserved to assure frames injected with this |
| * flag are not reordered relative to each other. |
| */ |
| ieee80211_select_queue_80211(sdata, skb, hdr); |
| skb_set_queue_mapping(skb, ieee80211_ac_from_tid(skb->priority)); |
| |
| /* |
| * Process the radiotap header. This will now take into account the |
| * selected chandef above to accurately set injection rates and |
| * retransmissions. |
| */ |
| if (!ieee80211_parse_tx_radiotap(skb, dev)) |
| goto fail_rcu; |
| |
| /* remove the injection radiotap header */ |
| skb_pull(skb, len_rthdr); |
| |
| ieee80211_xmit(sdata, NULL, skb); |
| rcu_read_unlock(); |
| |
| return NETDEV_TX_OK; |
| |
| fail_rcu: |
| rcu_read_unlock(); |
| fail: |
| dev_kfree_skb(skb); |
| return NETDEV_TX_OK; /* meaning, we dealt with the skb */ |
| } |
| |
| static inline bool ieee80211_is_tdls_setup(struct sk_buff *skb) |
| { |
| u16 ethertype = (skb->data[12] << 8) | skb->data[13]; |
| |
| return ethertype == ETH_P_TDLS && |
| skb->len > 14 && |
| skb->data[14] == WLAN_TDLS_SNAP_RFTYPE; |
| } |
| |
| int ieee80211_lookup_ra_sta(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, |
| struct sta_info **sta_out) |
| { |
| struct sta_info *sta; |
| |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_AP_VLAN: |
| sta = rcu_dereference(sdata->u.vlan.sta); |
| if (sta) { |
| *sta_out = sta; |
| return 0; |
| } else if (sdata->wdev.use_4addr) { |
| return -ENOLINK; |
| } |
| fallthrough; |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_OCB: |
| case NL80211_IFTYPE_ADHOC: |
| if (is_multicast_ether_addr(skb->data)) { |
| *sta_out = ERR_PTR(-ENOENT); |
| return 0; |
| } |
| sta = sta_info_get_bss(sdata, skb->data); |
| break; |
| #ifdef CONFIG_MAC80211_MESH |
| case NL80211_IFTYPE_MESH_POINT: |
| /* determined much later */ |
| *sta_out = NULL; |
| return 0; |
| #endif |
| case NL80211_IFTYPE_STATION: |
| if (sdata->wdev.wiphy->flags & WIPHY_FLAG_SUPPORTS_TDLS) { |
| sta = sta_info_get(sdata, skb->data); |
| if (sta && test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { |
| if (test_sta_flag(sta, |
| WLAN_STA_TDLS_PEER_AUTH)) { |
| *sta_out = sta; |
| return 0; |
| } |
| |
| /* |
| * TDLS link during setup - throw out frames to |
| * peer. Allow TDLS-setup frames to unauthorized |
| * peers for the special case of a link teardown |
| * after a TDLS sta is removed due to being |
| * unreachable. |
| */ |
| if (!ieee80211_is_tdls_setup(skb)) |
| return -EINVAL; |
| } |
| |
| } |
| |
| sta = sta_info_get(sdata, sdata->u.mgd.bssid); |
| if (!sta) |
| return -ENOLINK; |
| break; |
| default: |
| return -EINVAL; |
| } |
| |
| *sta_out = sta ?: ERR_PTR(-ENOENT); |
| return 0; |
| } |
| |
| static u16 ieee80211_store_ack_skb(struct ieee80211_local *local, |
| struct sk_buff *skb, |
| u32 *info_flags, |
| u64 *cookie) |
| { |
| struct sk_buff *ack_skb; |
| u16 info_id = 0; |
| |
| if (skb->sk) |
| ack_skb = skb_clone_sk(skb); |
| else |
| ack_skb = skb_clone(skb, GFP_ATOMIC); |
| |
| if (ack_skb) { |
| unsigned long flags; |
| int id; |
| |
| spin_lock_irqsave(&local->ack_status_lock, flags); |
| id = idr_alloc(&local->ack_status_frames, ack_skb, |
| 1, 0x2000, GFP_ATOMIC); |
| spin_unlock_irqrestore(&local->ack_status_lock, flags); |
| |
| if (id >= 0) { |
| info_id = id; |
| *info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; |
| if (cookie) { |
| *cookie = ieee80211_mgmt_tx_cookie(local); |
| IEEE80211_SKB_CB(ack_skb)->ack.cookie = *cookie; |
| } |
| } else { |
| kfree_skb(ack_skb); |
| } |
| } |
| |
| return info_id; |
| } |
| |
| /** |
| * ieee80211_build_hdr - build 802.11 header in the given frame |
| * @sdata: virtual interface to build the header for |
| * @skb: the skb to build the header in |
| * @info_flags: skb flags to set |
| * @sta: the station pointer |
| * @ctrl_flags: info control flags to set |
| * @cookie: cookie pointer to fill (if not %NULL) |
| * |
| * This function takes the skb with 802.3 header and reformats the header to |
| * the appropriate IEEE 802.11 header based on which interface the packet is |
| * being transmitted on. |
| * |
| * Note that this function also takes care of the TX status request and |
| * potential unsharing of the SKB - this needs to be interleaved with the |
| * header building. |
| * |
| * The function requires the read-side RCU lock held |
| * |
| * Returns: the (possibly reallocated) skb or an ERR_PTR() code |
| */ |
| static struct sk_buff *ieee80211_build_hdr(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, u32 info_flags, |
| struct sta_info *sta, u32 ctrl_flags, |
| u64 *cookie) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_tx_info *info; |
| int head_need; |
| u16 ethertype, hdrlen, meshhdrlen = 0; |
| __le16 fc; |
| struct ieee80211_hdr hdr; |
| struct ieee80211s_hdr mesh_hdr __maybe_unused; |
| struct mesh_path __maybe_unused *mppath = NULL, *mpath = NULL; |
| const u8 *encaps_data; |
| int encaps_len, skip_header_bytes; |
| bool wme_sta = false, authorized = false; |
| bool tdls_peer; |
| bool multicast; |
| u16 info_id = 0; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| struct ieee80211_sub_if_data *ap_sdata; |
| enum nl80211_band band; |
| int ret; |
| |
| if (IS_ERR(sta)) |
| sta = NULL; |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| if (local->force_tx_status) |
| info_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; |
| #endif |
| |
| /* convert Ethernet header to proper 802.11 header (based on |
| * operation mode) */ |
| ethertype = (skb->data[12] << 8) | skb->data[13]; |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); |
| |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_AP_VLAN: |
| if (sdata->wdev.use_4addr) { |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | IEEE80211_FCTL_TODS); |
| /* RA TA DA SA */ |
| memcpy(hdr.addr1, sta->sta.addr, ETH_ALEN); |
| memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); |
| memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); |
| hdrlen = 30; |
| authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); |
| wme_sta = sta->sta.wme; |
| } |
| ap_sdata = container_of(sdata->bss, struct ieee80211_sub_if_data, |
| u.ap); |
| chanctx_conf = rcu_dereference(ap_sdata->vif.chanctx_conf); |
| if (!chanctx_conf) { |
| ret = -ENOTCONN; |
| goto free; |
| } |
| band = chanctx_conf->def.chan->band; |
| if (sdata->wdev.use_4addr) |
| break; |
| fallthrough; |
| case NL80211_IFTYPE_AP: |
| if (sdata->vif.type == NL80211_IFTYPE_AP) |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (!chanctx_conf) { |
| ret = -ENOTCONN; |
| goto free; |
| } |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); |
| /* DA BSSID SA */ |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); |
| memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); |
| memcpy(hdr.addr3, skb->data + ETH_ALEN, ETH_ALEN); |
| hdrlen = 24; |
| band = chanctx_conf->def.chan->band; |
| break; |
| #ifdef CONFIG_MAC80211_MESH |
| case NL80211_IFTYPE_MESH_POINT: |
| if (!is_multicast_ether_addr(skb->data)) { |
| struct sta_info *next_hop; |
| bool mpp_lookup = true; |
| |
| mpath = mesh_path_lookup(sdata, skb->data); |
| if (mpath) { |
| mpp_lookup = false; |
| next_hop = rcu_dereference(mpath->next_hop); |
| if (!next_hop || |
| !(mpath->flags & (MESH_PATH_ACTIVE | |
| MESH_PATH_RESOLVING))) |
| mpp_lookup = true; |
| } |
| |
| if (mpp_lookup) { |
| mppath = mpp_path_lookup(sdata, skb->data); |
| if (mppath) |
| mppath->exp_time = jiffies; |
| } |
| |
| if (mppath && mpath) |
| mesh_path_del(sdata, mpath->dst); |
| } |
| |
| /* |
| * Use address extension if it is a packet from |
| * another interface or if we know the destination |
| * is being proxied by a portal (i.e. portal address |
| * differs from proxied address) |
| */ |
| if (ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN) && |
| !(mppath && !ether_addr_equal(mppath->mpp, skb->data))) { |
| hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, |
| skb->data, skb->data + ETH_ALEN); |
| meshhdrlen = ieee80211_new_mesh_header(sdata, &mesh_hdr, |
| NULL, NULL); |
| } else { |
| /* DS -> MBSS (802.11-2012 13.11.3.3). |
| * For unicast with unknown forwarding information, |
| * destination might be in the MBSS or if that fails |
| * forwarded to another mesh gate. In either case |
| * resolution will be handled in ieee80211_xmit(), so |
| * leave the original DA. This also works for mcast */ |
| const u8 *mesh_da = skb->data; |
| |
| if (mppath) |
| mesh_da = mppath->mpp; |
| else if (mpath) |
| mesh_da = mpath->dst; |
| |
| hdrlen = ieee80211_fill_mesh_addresses(&hdr, &fc, |
| mesh_da, sdata->vif.addr); |
| if (is_multicast_ether_addr(mesh_da)) |
| /* DA TA mSA AE:SA */ |
| meshhdrlen = ieee80211_new_mesh_header( |
| sdata, &mesh_hdr, |
| skb->data + ETH_ALEN, NULL); |
| else |
| /* RA TA mDA mSA AE:DA SA */ |
| meshhdrlen = ieee80211_new_mesh_header( |
| sdata, &mesh_hdr, skb->data, |
| skb->data + ETH_ALEN); |
| |
| } |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (!chanctx_conf) { |
| ret = -ENOTCONN; |
| goto free; |
| } |
| band = chanctx_conf->def.chan->band; |
| |
| /* For injected frames, fill RA right away as nexthop lookup |
| * will be skipped. |
| */ |
| if ((ctrl_flags & IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP) && |
| is_zero_ether_addr(hdr.addr1)) |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); |
| break; |
| #endif |
| case NL80211_IFTYPE_STATION: |
| /* we already did checks when looking up the RA STA */ |
| tdls_peer = test_sta_flag(sta, WLAN_STA_TDLS_PEER); |
| |
| if (tdls_peer) { |
| /* DA SA BSSID */ |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); |
| memcpy(hdr.addr3, sdata->u.mgd.bssid, ETH_ALEN); |
| hdrlen = 24; |
| } else if (sdata->u.mgd.use_4addr && |
| cpu_to_be16(ethertype) != sdata->control_port_protocol) { |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | |
| IEEE80211_FCTL_TODS); |
| /* RA TA DA SA */ |
| memcpy(hdr.addr1, sdata->u.mgd.bssid, ETH_ALEN); |
| memcpy(hdr.addr2, sdata->vif.addr, ETH_ALEN); |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); |
| memcpy(hdr.addr4, skb->data + ETH_ALEN, ETH_ALEN); |
| hdrlen = 30; |
| } else { |
| fc |= cpu_to_le16(IEEE80211_FCTL_TODS); |
| /* BSSID SA DA */ |
| memcpy(hdr.addr1, sdata->u.mgd.bssid, ETH_ALEN); |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); |
| memcpy(hdr.addr3, skb->data, ETH_ALEN); |
| hdrlen = 24; |
| } |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (!chanctx_conf) { |
| ret = -ENOTCONN; |
| goto free; |
| } |
| band = chanctx_conf->def.chan->band; |
| break; |
| case NL80211_IFTYPE_OCB: |
| /* DA SA BSSID */ |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); |
| eth_broadcast_addr(hdr.addr3); |
| hdrlen = 24; |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (!chanctx_conf) { |
| ret = -ENOTCONN; |
| goto free; |
| } |
| band = chanctx_conf->def.chan->band; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| /* DA SA BSSID */ |
| memcpy(hdr.addr1, skb->data, ETH_ALEN); |
| memcpy(hdr.addr2, skb->data + ETH_ALEN, ETH_ALEN); |
| memcpy(hdr.addr3, sdata->u.ibss.bssid, ETH_ALEN); |
| hdrlen = 24; |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (!chanctx_conf) { |
| ret = -ENOTCONN; |
| goto free; |
| } |
| band = chanctx_conf->def.chan->band; |
| break; |
| default: |
| ret = -EINVAL; |
| goto free; |
| } |
| |
| multicast = is_multicast_ether_addr(hdr.addr1); |
| |
| /* sta is always NULL for mesh */ |
| if (sta) { |
| authorized = test_sta_flag(sta, WLAN_STA_AUTHORIZED); |
| wme_sta = sta->sta.wme; |
| } else if (ieee80211_vif_is_mesh(&sdata->vif)) { |
| /* For mesh, the use of the QoS header is mandatory */ |
| wme_sta = true; |
| } |
| |
| /* receiver does QoS (which also means we do) use it */ |
| if (wme_sta) { |
| fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); |
| hdrlen += 2; |
| } |
| |
| /* |
| * Drop unicast frames to unauthorised stations unless they are |
| * EAPOL frames from the local station. |
| */ |
| if (unlikely(!ieee80211_vif_is_mesh(&sdata->vif) && |
| (sdata->vif.type != NL80211_IFTYPE_OCB) && |
| !multicast && !authorized && |
| (cpu_to_be16(ethertype) != sdata->control_port_protocol || |
| !ether_addr_equal(sdata->vif.addr, skb->data + ETH_ALEN)))) { |
| #ifdef CONFIG_MAC80211_VERBOSE_DEBUG |
| net_info_ratelimited("%s: dropped frame to %pM (unauthorized port)\n", |
| sdata->name, hdr.addr1); |
| #endif |
| |
| I802_DEBUG_INC(local->tx_handlers_drop_unauth_port); |
| |
| ret = -EPERM; |
| goto free; |
| } |
| |
| if (unlikely(!multicast && ((skb->sk && |
| skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS) || |
| ctrl_flags & IEEE80211_TX_CTL_REQ_TX_STATUS))) |
| info_id = ieee80211_store_ack_skb(local, skb, &info_flags, |
| cookie); |
| |
| /* |
| * If the skb is shared we need to obtain our own copy. |
| */ |
| if (skb_shared(skb)) { |
| struct sk_buff *tmp_skb = skb; |
| |
| /* can't happen -- skb is a clone if info_id != 0 */ |
| WARN_ON(info_id); |
| |
| skb = skb_clone(skb, GFP_ATOMIC); |
| kfree_skb(tmp_skb); |
| |
| if (!skb) { |
| ret = -ENOMEM; |
| goto free; |
| } |
| } |
| |
| hdr.frame_control = fc; |
| hdr.duration_id = 0; |
| hdr.seq_ctrl = 0; |
| |
| skip_header_bytes = ETH_HLEN; |
| if (ethertype == ETH_P_AARP || ethertype == ETH_P_IPX) { |
| encaps_data = bridge_tunnel_header; |
| encaps_len = sizeof(bridge_tunnel_header); |
| skip_header_bytes -= 2; |
| } else if (ethertype >= ETH_P_802_3_MIN) { |
| encaps_data = rfc1042_header; |
| encaps_len = sizeof(rfc1042_header); |
| skip_header_bytes -= 2; |
| } else { |
| encaps_data = NULL; |
| encaps_len = 0; |
| } |
| |
| skb_pull(skb, skip_header_bytes); |
| head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb); |
| |
| /* |
| * So we need to modify the skb header and hence need a copy of |
| * that. The head_need variable above doesn't, so far, include |
| * the needed header space that we don't need right away. If we |
| * can, then we don't reallocate right now but only after the |
| * frame arrives at the master device (if it does...) |
| * |
| * If we cannot, however, then we will reallocate to include all |
| * the ever needed space. Also, if we need to reallocate it anyway, |
| * make it big enough for everything we may ever need. |
| */ |
| |
| if (head_need > 0 || skb_cloned(skb)) { |
| head_need += sdata->encrypt_headroom; |
| head_need += local->tx_headroom; |
| head_need = max_t(int, 0, head_need); |
| if (ieee80211_skb_resize(sdata, skb, head_need, ENCRYPT_DATA)) { |
| ieee80211_free_txskb(&local->hw, skb); |
| skb = NULL; |
| return ERR_PTR(-ENOMEM); |
| } |
| } |
| |
| if (encaps_data) |
| memcpy(skb_push(skb, encaps_len), encaps_data, encaps_len); |
| |
| #ifdef CONFIG_MAC80211_MESH |
| if (meshhdrlen > 0) |
| memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen); |
| #endif |
| |
| if (ieee80211_is_data_qos(fc)) { |
| __le16 *qos_control; |
| |
| qos_control = skb_push(skb, 2); |
| memcpy(skb_push(skb, hdrlen - 2), &hdr, hdrlen - 2); |
| /* |
| * Maybe we could actually set some fields here, for now just |
| * initialise to zero to indicate no special operation. |
| */ |
| *qos_control = 0; |
| } else |
| memcpy(skb_push(skb, hdrlen), &hdr, hdrlen); |
| |
| skb_reset_mac_header(skb); |
| |
| info = IEEE80211_SKB_CB(skb); |
| memset(info, 0, sizeof(*info)); |
| |
| info->flags = info_flags; |
| info->ack_frame_id = info_id; |
| info->band = band; |
| info->control.flags = ctrl_flags; |
| |
| return skb; |
| free: |
| kfree_skb(skb); |
| return ERR_PTR(ret); |
| } |
| |
| /* |
| * fast-xmit overview |
| * |
| * The core idea of this fast-xmit is to remove per-packet checks by checking |
| * them out of band. ieee80211_check_fast_xmit() implements the out-of-band |
| * checks that are needed to get the sta->fast_tx pointer assigned, after which |
| * much less work can be done per packet. For example, fragmentation must be |
| * disabled or the fast_tx pointer will not be set. All the conditions are seen |
| * in the code here. |
| * |
| * Once assigned, the fast_tx data structure also caches the per-packet 802.11 |
| * header and other data to aid packet processing in ieee80211_xmit_fast(). |
| * |
| * The most difficult part of this is that when any of these assumptions |
| * change, an external trigger (i.e. a call to ieee80211_clear_fast_xmit(), |
| * ieee80211_check_fast_xmit() or friends) is required to reset the data, |
| * since the per-packet code no longer checks the conditions. This is reflected |
| * by the calls to these functions throughout the rest of the code, and must be |
| * maintained if any of the TX path checks change. |
| */ |
| |
| void ieee80211_check_fast_xmit(struct sta_info *sta) |
| { |
| struct ieee80211_fast_tx build = {}, *fast_tx = NULL, *old; |
| struct ieee80211_local *local = sta->local; |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct ieee80211_hdr *hdr = (void *)build.hdr; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| __le16 fc; |
| |
| if (!ieee80211_hw_check(&local->hw, SUPPORT_FAST_XMIT)) |
| return; |
| |
| /* Locking here protects both the pointer itself, and against concurrent |
| * invocations winning data access races to, e.g., the key pointer that |
| * is used. |
| * Without it, the invocation of this function right after the key |
| * pointer changes wouldn't be sufficient, as another CPU could access |
| * the pointer, then stall, and then do the cache update after the CPU |
| * that invalidated the key. |
| * With the locking, such scenarios cannot happen as the check for the |
| * key and the fast-tx assignment are done atomically, so the CPU that |
| * modifies the key will either wait or other one will see the key |
| * cleared/changed already. |
| */ |
| spin_lock_bh(&sta->lock); |
| if (ieee80211_hw_check(&local->hw, SUPPORTS_PS) && |
| !ieee80211_hw_check(&local->hw, SUPPORTS_DYNAMIC_PS) && |
| sdata->vif.type == NL80211_IFTYPE_STATION) |
| goto out; |
| |
| if (!test_sta_flag(sta, WLAN_STA_AUTHORIZED)) |
| goto out; |
| |
| if (test_sta_flag(sta, WLAN_STA_PS_STA) || |
| test_sta_flag(sta, WLAN_STA_PS_DRIVER) || |
| test_sta_flag(sta, WLAN_STA_PS_DELIVER) || |
| test_sta_flag(sta, WLAN_STA_CLEAR_PS_FILT)) |
| goto out; |
| |
| if (sdata->noack_map) |
| goto out; |
| |
| /* fast-xmit doesn't handle fragmentation at all */ |
| if (local->hw.wiphy->frag_threshold != (u32)-1 && |
| !ieee80211_hw_check(&local->hw, SUPPORTS_TX_FRAG)) |
| goto out; |
| |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (!chanctx_conf) { |
| rcu_read_unlock(); |
| goto out; |
| } |
| build.band = chanctx_conf->def.chan->band; |
| rcu_read_unlock(); |
| |
| fc = cpu_to_le16(IEEE80211_FTYPE_DATA | IEEE80211_STYPE_DATA); |
| |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_ADHOC: |
| /* DA SA BSSID */ |
| build.da_offs = offsetof(struct ieee80211_hdr, addr1); |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr2); |
| memcpy(hdr->addr3, sdata->u.ibss.bssid, ETH_ALEN); |
| build.hdr_len = 24; |
| break; |
| case NL80211_IFTYPE_STATION: |
| if (test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { |
| /* DA SA BSSID */ |
| build.da_offs = offsetof(struct ieee80211_hdr, addr1); |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr2); |
| memcpy(hdr->addr3, sdata->u.mgd.bssid, ETH_ALEN); |
| build.hdr_len = 24; |
| break; |
| } |
| |
| if (sdata->u.mgd.use_4addr) { |
| /* non-regular ethertype cannot use the fastpath */ |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | |
| IEEE80211_FCTL_TODS); |
| /* RA TA DA SA */ |
| memcpy(hdr->addr1, sdata->u.mgd.bssid, ETH_ALEN); |
| memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); |
| build.da_offs = offsetof(struct ieee80211_hdr, addr3); |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr4); |
| build.hdr_len = 30; |
| break; |
| } |
| fc |= cpu_to_le16(IEEE80211_FCTL_TODS); |
| /* BSSID SA DA */ |
| memcpy(hdr->addr1, sdata->u.mgd.bssid, ETH_ALEN); |
| build.da_offs = offsetof(struct ieee80211_hdr, addr3); |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr2); |
| build.hdr_len = 24; |
| break; |
| case NL80211_IFTYPE_AP_VLAN: |
| if (sdata->wdev.use_4addr) { |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS | |
| IEEE80211_FCTL_TODS); |
| /* RA TA DA SA */ |
| memcpy(hdr->addr1, sta->sta.addr, ETH_ALEN); |
| memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); |
| build.da_offs = offsetof(struct ieee80211_hdr, addr3); |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr4); |
| build.hdr_len = 30; |
| break; |
| } |
| fallthrough; |
| case NL80211_IFTYPE_AP: |
| fc |= cpu_to_le16(IEEE80211_FCTL_FROMDS); |
| /* DA BSSID SA */ |
| build.da_offs = offsetof(struct ieee80211_hdr, addr1); |
| memcpy(hdr->addr2, sdata->vif.addr, ETH_ALEN); |
| build.sa_offs = offsetof(struct ieee80211_hdr, addr3); |
| build.hdr_len = 24; |
| break; |
| default: |
| /* not handled on fast-xmit */ |
| goto out; |
| } |
| |
| if (sta->sta.wme) { |
| build.hdr_len += 2; |
| fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); |
| } |
| |
| /* We store the key here so there's no point in using rcu_dereference() |
| * but that's fine because the code that changes the pointers will call |
| * this function after doing so. For a single CPU that would be enough, |
| * for multiple see the comment above. |
| */ |
| build.key = rcu_access_pointer(sta->ptk[sta->ptk_idx]); |
| if (!build.key) |
| build.key = rcu_access_pointer(sdata->default_unicast_key); |
| if (build.key) { |
| bool gen_iv, iv_spc, mmic; |
| |
| gen_iv = build.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV; |
| iv_spc = build.key->conf.flags & IEEE80211_KEY_FLAG_PUT_IV_SPACE; |
| mmic = build.key->conf.flags & |
| (IEEE80211_KEY_FLAG_GENERATE_MMIC | |
| IEEE80211_KEY_FLAG_PUT_MIC_SPACE); |
| |
| /* don't handle software crypto */ |
| if (!(build.key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE)) |
| goto out; |
| |
| /* Key is being removed */ |
| if (build.key->flags & KEY_FLAG_TAINTED) |
| goto out; |
| |
| switch (build.key->conf.cipher) { |
| case WLAN_CIPHER_SUITE_CCMP: |
| case WLAN_CIPHER_SUITE_CCMP_256: |
| if (gen_iv) |
| build.pn_offs = build.hdr_len; |
| if (gen_iv || iv_spc) |
| build.hdr_len += IEEE80211_CCMP_HDR_LEN; |
| break; |
| case WLAN_CIPHER_SUITE_GCMP: |
| case WLAN_CIPHER_SUITE_GCMP_256: |
| if (gen_iv) |
| build.pn_offs = build.hdr_len; |
| if (gen_iv || iv_spc) |
| build.hdr_len += IEEE80211_GCMP_HDR_LEN; |
| break; |
| case WLAN_CIPHER_SUITE_TKIP: |
| /* cannot handle MMIC or IV generation in xmit-fast */ |
| if (mmic || gen_iv) |
| goto out; |
| if (iv_spc) |
| build.hdr_len += IEEE80211_TKIP_IV_LEN; |
| break; |
| case WLAN_CIPHER_SUITE_WEP40: |
| case WLAN_CIPHER_SUITE_WEP104: |
| /* cannot handle IV generation in fast-xmit */ |
| if (gen_iv) |
| goto out; |
| if (iv_spc) |
| build.hdr_len += IEEE80211_WEP_IV_LEN; |
| break; |
| case WLAN_CIPHER_SUITE_AES_CMAC: |
| case WLAN_CIPHER_SUITE_BIP_CMAC_256: |
| case WLAN_CIPHER_SUITE_BIP_GMAC_128: |
| case WLAN_CIPHER_SUITE_BIP_GMAC_256: |
| WARN(1, |
| "management cipher suite 0x%x enabled for data\n", |
| build.key->conf.cipher); |
| goto out; |
| default: |
| /* we don't know how to generate IVs for this at all */ |
| if (WARN_ON(gen_iv)) |
| goto out; |
| /* pure hardware keys are OK, of course */ |
| if (!(build.key->flags & KEY_FLAG_CIPHER_SCHEME)) |
| break; |
| /* cipher scheme might require space allocation */ |
| if (iv_spc && |
| build.key->conf.iv_len > IEEE80211_FAST_XMIT_MAX_IV) |
| goto out; |
| if (iv_spc) |
| build.hdr_len += build.key->conf.iv_len; |
| } |
| |
| fc |= cpu_to_le16(IEEE80211_FCTL_PROTECTED); |
| } |
| |
| hdr->frame_control = fc; |
| |
| memcpy(build.hdr + build.hdr_len, |
| rfc1042_header, sizeof(rfc1042_header)); |
| build.hdr_len += sizeof(rfc1042_header); |
| |
| fast_tx = kmemdup(&build, sizeof(build), GFP_ATOMIC); |
| /* if the kmemdup fails, continue w/o fast_tx */ |
| if (!fast_tx) |
| goto out; |
| |
| out: |
| /* we might have raced against another call to this function */ |
| old = rcu_dereference_protected(sta->fast_tx, |
| lockdep_is_held(&sta->lock)); |
| rcu_assign_pointer(sta->fast_tx, fast_tx); |
| if (old) |
| kfree_rcu(old, rcu_head); |
| spin_unlock_bh(&sta->lock); |
| } |
| |
| void ieee80211_check_fast_xmit_all(struct ieee80211_local *local) |
| { |
| struct sta_info *sta; |
| |
| rcu_read_lock(); |
| list_for_each_entry_rcu(sta, &local->sta_list, list) |
| ieee80211_check_fast_xmit(sta); |
| rcu_read_unlock(); |
| } |
| |
| void ieee80211_check_fast_xmit_iface(struct ieee80211_sub_if_data *sdata) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta; |
| |
| rcu_read_lock(); |
| |
| list_for_each_entry_rcu(sta, &local->sta_list, list) { |
| if (sdata != sta->sdata && |
| (!sta->sdata->bss || sta->sdata->bss != sdata->bss)) |
| continue; |
| ieee80211_check_fast_xmit(sta); |
| } |
| |
| rcu_read_unlock(); |
| } |
| |
| void ieee80211_clear_fast_xmit(struct sta_info *sta) |
| { |
| struct ieee80211_fast_tx *fast_tx; |
| |
| spin_lock_bh(&sta->lock); |
| fast_tx = rcu_dereference_protected(sta->fast_tx, |
| lockdep_is_held(&sta->lock)); |
| RCU_INIT_POINTER(sta->fast_tx, NULL); |
| spin_unlock_bh(&sta->lock); |
| |
| if (fast_tx) |
| kfree_rcu(fast_tx, rcu_head); |
| } |
| |
| static bool ieee80211_amsdu_realloc_pad(struct ieee80211_local *local, |
| struct sk_buff *skb, int headroom) |
| { |
| if (skb_headroom(skb) < headroom) { |
| I802_DEBUG_INC(local->tx_expand_skb_head); |
| |
| if (pskb_expand_head(skb, headroom, 0, GFP_ATOMIC)) { |
| wiphy_debug(local->hw.wiphy, |
| "failed to reallocate TX buffer\n"); |
| return false; |
| } |
| } |
| |
| return true; |
| } |
| |
| static bool ieee80211_amsdu_prepare_head(struct ieee80211_sub_if_data *sdata, |
| struct ieee80211_fast_tx *fast_tx, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_hdr *hdr; |
| struct ethhdr *amsdu_hdr; |
| int hdr_len = fast_tx->hdr_len - sizeof(rfc1042_header); |
| int subframe_len = skb->len - hdr_len; |
| void *data; |
| u8 *qc, *h_80211_src, *h_80211_dst; |
| const u8 *bssid; |
| |
| if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) |
| return false; |
| |
| if (info->control.flags & IEEE80211_TX_CTRL_AMSDU) |
| return true; |
| |
| if (!ieee80211_amsdu_realloc_pad(local, skb, |
| sizeof(*amsdu_hdr) + |
| local->hw.extra_tx_headroom)) |
| return false; |
| |
| data = skb_push(skb, sizeof(*amsdu_hdr)); |
| memmove(data, data + sizeof(*amsdu_hdr), hdr_len); |
| hdr = data; |
| amsdu_hdr = data + hdr_len; |
| /* h_80211_src/dst is addr* field within hdr */ |
| h_80211_src = data + fast_tx->sa_offs; |
| h_80211_dst = data + fast_tx->da_offs; |
| |
| amsdu_hdr->h_proto = cpu_to_be16(subframe_len); |
| ether_addr_copy(amsdu_hdr->h_source, h_80211_src); |
| ether_addr_copy(amsdu_hdr->h_dest, h_80211_dst); |
| |
| /* according to IEEE 802.11-2012 8.3.2 table 8-19, the outer SA/DA |
| * fields needs to be changed to BSSID for A-MSDU frames depending |
| * on FromDS/ToDS values. |
| */ |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_STATION: |
| bssid = sdata->u.mgd.bssid; |
| break; |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_AP_VLAN: |
| bssid = sdata->vif.addr; |
| break; |
| default: |
| bssid = NULL; |
| } |
| |
| if (bssid && ieee80211_has_fromds(hdr->frame_control)) |
| ether_addr_copy(h_80211_src, bssid); |
| |
| if (bssid && ieee80211_has_tods(hdr->frame_control)) |
| ether_addr_copy(h_80211_dst, bssid); |
| |
| qc = ieee80211_get_qos_ctl(hdr); |
| *qc |= IEEE80211_QOS_CTL_A_MSDU_PRESENT; |
| |
| info->control.flags |= IEEE80211_TX_CTRL_AMSDU; |
| |
| return true; |
| } |
| |
| static bool ieee80211_amsdu_aggregate(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, |
| struct ieee80211_fast_tx *fast_tx, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct fq *fq = &local->fq; |
| struct fq_tin *tin; |
| struct fq_flow *flow; |
| u8 tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; |
| struct ieee80211_txq *txq = sta->sta.txq[tid]; |
| struct txq_info *txqi; |
| struct sk_buff **frag_tail, *head; |
| int subframe_len = skb->len - ETH_ALEN; |
| u8 max_subframes = sta->sta.max_amsdu_subframes; |
| int max_frags = local->hw.max_tx_fragments; |
| int max_amsdu_len = sta->sta.max_amsdu_len; |
| int orig_truesize; |
| u32 flow_idx; |
| __be16 len; |
| void *data; |
| bool ret = false; |
| unsigned int orig_len; |
| int n = 2, nfrags, pad = 0; |
| u16 hdrlen; |
| |
| if (!ieee80211_hw_check(&local->hw, TX_AMSDU)) |
| return false; |
| |
| if (sdata->vif.offload_flags & IEEE80211_OFFLOAD_ENCAP_ENABLED) |
| return false; |
| |
| if (skb_is_gso(skb)) |
| return false; |
| |
| if (!txq) |
| return false; |
| |
| txqi = to_txq_info(txq); |
| if (test_bit(IEEE80211_TXQ_NO_AMSDU, &txqi->flags)) |
| return false; |
| |
| if (sta->sta.max_rc_amsdu_len) |
| max_amsdu_len = min_t(int, max_amsdu_len, |
| sta->sta.max_rc_amsdu_len); |
| |
| if (sta->sta.max_tid_amsdu_len[tid]) |
| max_amsdu_len = min_t(int, max_amsdu_len, |
| sta->sta.max_tid_amsdu_len[tid]); |
| |
| flow_idx = fq_flow_idx(fq, skb); |
| |
| spin_lock_bh(&fq->lock); |
| |
| /* TODO: Ideally aggregation should be done on dequeue to remain |
| * responsive to environment changes. |
| */ |
| |
| tin = &txqi->tin; |
| flow = fq_flow_classify(fq, tin, flow_idx, skb); |
| head = skb_peek_tail(&flow->queue); |
| if (!head || skb_is_gso(head)) |
| goto out; |
| |
| orig_truesize = head->truesize; |
| orig_len = head->len; |
| |
| if (skb->len + head->len > max_amsdu_len) |
| goto out; |
| |
| nfrags = 1 + skb_shinfo(skb)->nr_frags; |
| nfrags += 1 + skb_shinfo(head)->nr_frags; |
| frag_tail = &skb_shinfo(head)->frag_list; |
| while (*frag_tail) { |
| nfrags += 1 + skb_shinfo(*frag_tail)->nr_frags; |
| frag_tail = &(*frag_tail)->next; |
| n++; |
| } |
| |
| if (max_subframes && n > max_subframes) |
| goto out; |
| |
| if (max_frags && nfrags > max_frags) |
| goto out; |
| |
| if (!drv_can_aggregate_in_amsdu(local, head, skb)) |
| goto out; |
| |
| if (!ieee80211_amsdu_prepare_head(sdata, fast_tx, head)) |
| goto out; |
| |
| /* |
| * Pad out the previous subframe to a multiple of 4 by adding the |
| * padding to the next one, that's being added. Note that head->len |
| * is the length of the full A-MSDU, but that works since each time |
| * we add a new subframe we pad out the previous one to a multiple |
| * of 4 and thus it no longer matters in the next round. |
| */ |
| hdrlen = fast_tx->hdr_len - sizeof(rfc1042_header); |
| if ((head->len - hdrlen) & 3) |
| pad = 4 - ((head->len - hdrlen) & 3); |
| |
| if (!ieee80211_amsdu_realloc_pad(local, skb, sizeof(rfc1042_header) + |
| 2 + pad)) |
| goto out_recalc; |
| |
| ret = true; |
| data = skb_push(skb, ETH_ALEN + 2); |
| memmove(data, data + ETH_ALEN + 2, 2 * ETH_ALEN); |
| |
| data += 2 * ETH_ALEN; |
| len = cpu_to_be16(subframe_len); |
| memcpy(data, &len, 2); |
| memcpy(data + 2, rfc1042_header, sizeof(rfc1042_header)); |
| |
| memset(skb_push(skb, pad), 0, pad); |
| |
| head->len += skb->len; |
| head->data_len += skb->len; |
| *frag_tail = skb; |
| |
| out_recalc: |
| fq->memory_usage += head->truesize - orig_truesize; |
| if (head->len != orig_len) { |
| flow->backlog += head->len - orig_len; |
| tin->backlog_bytes += head->len - orig_len; |
| } |
| out: |
| spin_unlock_bh(&fq->lock); |
| |
| return ret; |
| } |
| |
| /* |
| * Can be called while the sta lock is held. Anything that can cause packets to |
| * be generated will cause deadlock! |
| */ |
| static ieee80211_tx_result |
| ieee80211_xmit_fast_finish(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, u8 pn_offs, |
| struct ieee80211_key *key, |
| struct ieee80211_tx_data *tx) |
| { |
| struct sk_buff *skb = tx->skb; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_hdr *hdr = (void *)skb->data; |
| u8 tid = IEEE80211_NUM_TIDS; |
| |
| if (!ieee80211_hw_check(&tx->local->hw, HAS_RATE_CONTROL) && |
| ieee80211_tx_h_rate_ctrl(tx) != TX_CONTINUE) |
| return TX_DROP; |
| |
| if (key) |
| info->control.hw_key = &key->conf; |
| |
| dev_sw_netstats_tx_add(skb->dev, 1, skb->len); |
| |
| if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; |
| hdr->seq_ctrl = ieee80211_tx_next_seq(sta, tid); |
| } else { |
| info->flags |= IEEE80211_TX_CTL_ASSIGN_SEQ; |
| hdr->seq_ctrl = cpu_to_le16(sdata->sequence_number); |
| sdata->sequence_number += 0x10; |
| } |
| |
| if (skb_shinfo(skb)->gso_size) |
| sta->tx_stats.msdu[tid] += |
| DIV_ROUND_UP(skb->len, skb_shinfo(skb)->gso_size); |
| else |
| sta->tx_stats.msdu[tid]++; |
| |
| info->hw_queue = sdata->vif.hw_queue[skb_get_queue_mapping(skb)]; |
| |
| /* statistics normally done by ieee80211_tx_h_stats (but that |
| * has to consider fragmentation, so is more complex) |
| */ |
| sta->tx_stats.bytes[skb_get_queue_mapping(skb)] += skb->len; |
| sta->tx_stats.packets[skb_get_queue_mapping(skb)]++; |
| |
| if (pn_offs) { |
| u64 pn; |
| u8 *crypto_hdr = skb->data + pn_offs; |
| |
| switch (key->conf.cipher) { |
| case WLAN_CIPHER_SUITE_CCMP: |
| case WLAN_CIPHER_SUITE_CCMP_256: |
| case WLAN_CIPHER_SUITE_GCMP: |
| case WLAN_CIPHER_SUITE_GCMP_256: |
| pn = atomic64_inc_return(&key->conf.tx_pn); |
| crypto_hdr[0] = pn; |
| crypto_hdr[1] = pn >> 8; |
| crypto_hdr[3] = 0x20 | (key->conf.keyidx << 6); |
| crypto_hdr[4] = pn >> 16; |
| crypto_hdr[5] = pn >> 24; |
| crypto_hdr[6] = pn >> 32; |
| crypto_hdr[7] = pn >> 40; |
| break; |
| } |
| } |
| |
| return TX_CONTINUE; |
| } |
| |
| static bool ieee80211_xmit_fast(struct ieee80211_sub_if_data *sdata, |
| struct sta_info *sta, |
| struct ieee80211_fast_tx *fast_tx, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_local *local = sdata->local; |
| u16 ethertype = (skb->data[12] << 8) | skb->data[13]; |
| int extra_head = fast_tx->hdr_len - (ETH_HLEN - 2); |
| int hw_headroom = sdata->local->hw.extra_tx_headroom; |
| struct ethhdr eth; |
| struct ieee80211_tx_info *info; |
| struct ieee80211_hdr *hdr = (void *)fast_tx->hdr; |
| struct ieee80211_tx_data tx; |
| ieee80211_tx_result r; |
| struct tid_ampdu_tx *tid_tx = NULL; |
| u8 tid = IEEE80211_NUM_TIDS; |
| |
| /* control port protocol needs a lot of special handling */ |
| if (cpu_to_be16(ethertype) == sdata->control_port_protocol) |
| return false; |
| |
| /* only RFC 1042 SNAP */ |
| if (ethertype < ETH_P_802_3_MIN) |
| return false; |
| |
| /* don't handle TX status request here either */ |
| if (skb->sk && skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS) |
| return false; |
| |
| if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; |
| tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); |
| if (tid_tx) { |
| if (!test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) |
| return false; |
| if (tid_tx->timeout) |
| tid_tx->last_tx = jiffies; |
| } |
| } |
| |
| /* after this point (skb is modified) we cannot return false */ |
| |
| if (skb_shared(skb)) { |
| struct sk_buff *tmp_skb = skb; |
| |
| skb = skb_clone(skb, GFP_ATOMIC); |
| kfree_skb(tmp_skb); |
| |
| if (!skb) |
| return true; |
| } |
| |
| if ((hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) && |
| ieee80211_amsdu_aggregate(sdata, sta, fast_tx, skb)) |
| return true; |
| |
| /* will not be crypto-handled beyond what we do here, so use false |
| * as the may-encrypt argument for the resize to not account for |
| * more room than we already have in 'extra_head' |
| */ |
| if (unlikely(ieee80211_skb_resize(sdata, skb, |
| max_t(int, extra_head + hw_headroom - |
| skb_headroom(skb), 0), |
| ENCRYPT_NO))) { |
| kfree_skb(skb); |
| return true; |
| } |
| |
| memcpy(ð, skb->data, ETH_HLEN - 2); |
| hdr = skb_push(skb, extra_head); |
| memcpy(skb->data, fast_tx->hdr, fast_tx->hdr_len); |
| memcpy(skb->data + fast_tx->da_offs, eth.h_dest, ETH_ALEN); |
| memcpy(skb->data + fast_tx->sa_offs, eth.h_source, ETH_ALEN); |
| |
| info = IEEE80211_SKB_CB(skb); |
| memset(info, 0, sizeof(*info)); |
| info->band = fast_tx->band; |
| info->control.vif = &sdata->vif; |
| info->flags = IEEE80211_TX_CTL_FIRST_FRAGMENT | |
| IEEE80211_TX_CTL_DONTFRAG | |
| (tid_tx ? IEEE80211_TX_CTL_AMPDU : 0); |
| info->control.flags = IEEE80211_TX_CTRL_FAST_XMIT; |
| |
| #ifdef CONFIG_MAC80211_DEBUGFS |
| if (local->force_tx_status) |
| info->flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; |
| #endif |
| |
| if (hdr->frame_control & cpu_to_le16(IEEE80211_STYPE_QOS_DATA)) { |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; |
| *ieee80211_get_qos_ctl(hdr) = tid; |
| } |
| |
| __skb_queue_head_init(&tx.skbs); |
| |
| tx.flags = IEEE80211_TX_UNICAST; |
| tx.local = local; |
| tx.sdata = sdata; |
| tx.sta = sta; |
| tx.key = fast_tx->key; |
| |
| if (ieee80211_queue_skb(local, sdata, sta, skb)) |
| return true; |
| |
| tx.skb = skb; |
| r = ieee80211_xmit_fast_finish(sdata, sta, fast_tx->pn_offs, |
| fast_tx->key, &tx); |
| tx.skb = NULL; |
| if (r == TX_DROP) { |
| kfree_skb(skb); |
| return true; |
| } |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) |
| sdata = container_of(sdata->bss, |
| struct ieee80211_sub_if_data, u.ap); |
| |
| __skb_queue_tail(&tx.skbs, skb); |
| ieee80211_tx_frags(local, &sdata->vif, sta, &tx.skbs, false); |
| return true; |
| } |
| |
| struct sk_buff *ieee80211_tx_dequeue(struct ieee80211_hw *hw, |
| struct ieee80211_txq *txq) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct txq_info *txqi = container_of(txq, struct txq_info, txq); |
| struct ieee80211_hdr *hdr; |
| struct sk_buff *skb = NULL; |
| struct fq *fq = &local->fq; |
| struct fq_tin *tin = &txqi->tin; |
| struct ieee80211_tx_info *info; |
| struct ieee80211_tx_data tx; |
| ieee80211_tx_result r; |
| struct ieee80211_vif *vif = txq->vif; |
| |
| WARN_ON_ONCE(softirq_count() == 0); |
| |
| if (!ieee80211_txq_airtime_check(hw, txq)) |
| return NULL; |
| |
| begin: |
| spin_lock_bh(&fq->lock); |
| |
| if (test_bit(IEEE80211_TXQ_STOP, &txqi->flags) || |
| test_bit(IEEE80211_TXQ_STOP_NETIF_TX, &txqi->flags)) |
| goto out; |
| |
| if (vif->txqs_stopped[txq->ac]) { |
| set_bit(IEEE80211_TXQ_STOP_NETIF_TX, &txqi->flags); |
| goto out; |
| } |
| |
| /* Make sure fragments stay together. */ |
| skb = __skb_dequeue(&txqi->frags); |
| if (unlikely(skb)) { |
| if (!(IEEE80211_SKB_CB(skb)->control.flags & |
| IEEE80211_TX_INTCFL_NEED_TXPROCESSING)) |
| goto out; |
| IEEE80211_SKB_CB(skb)->control.flags &= |
| ~IEEE80211_TX_INTCFL_NEED_TXPROCESSING; |
| } else { |
| skb = fq_tin_dequeue(fq, tin, fq_tin_dequeue_func); |
| } |
| |
| if (!skb) |
| goto out; |
| |
| spin_unlock_bh(&fq->lock); |
| |
| hdr = (struct ieee80211_hdr *)skb->data; |
| info = IEEE80211_SKB_CB(skb); |
| |
| memset(&tx, 0, sizeof(tx)); |
| __skb_queue_head_init(&tx.skbs); |
| tx.local = local; |
| tx.skb = skb; |
| tx.sdata = vif_to_sdata(info->control.vif); |
| |
| if (txq->sta) { |
| tx.sta = container_of(txq->sta, struct sta_info, sta); |
| /* |
| * Drop unicast frames to unauthorised stations unless they are |
| * injected frames or EAPOL frames from the local station. |
| */ |
| if (unlikely(!(info->flags & IEEE80211_TX_CTL_INJECTED) && |
| ieee80211_is_data(hdr->frame_control) && |
| !ieee80211_vif_is_mesh(&tx.sdata->vif) && |
| tx.sdata->vif.type != NL80211_IFTYPE_OCB && |
| !is_multicast_ether_addr(hdr->addr1) && |
| !test_sta_flag(tx.sta, WLAN_STA_AUTHORIZED) && |
| (!(info->control.flags & |
| IEEE80211_TX_CTRL_PORT_CTRL_PROTO) || |
| !ether_addr_equal(tx.sdata->vif.addr, |
| hdr->addr2)))) { |
| I802_DEBUG_INC(local->tx_handlers_drop_unauth_port); |
| ieee80211_free_txskb(&local->hw, skb); |
| goto begin; |
| } |
| } |
| |
| /* |
| * The key can be removed while the packet was queued, so need to call |
| * this here to get the current key. |
| */ |
| r = ieee80211_tx_h_select_key(&tx); |
| if (r != TX_CONTINUE) { |
| ieee80211_free_txskb(&local->hw, skb); |
| goto begin; |
| } |
| |
| if (test_bit(IEEE80211_TXQ_AMPDU, &txqi->flags)) |
| info->flags |= IEEE80211_TX_CTL_AMPDU; |
| else |
| info->flags &= ~IEEE80211_TX_CTL_AMPDU; |
| |
| if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) { |
| if (!ieee80211_hw_check(&local->hw, HAS_RATE_CONTROL)) { |
| r = ieee80211_tx_h_rate_ctrl(&tx); |
| if (r != TX_CONTINUE) { |
| ieee80211_free_txskb(&local->hw, skb); |
| goto begin; |
| } |
| } |
| goto encap_out; |
| } |
| |
| if (info->control.flags & IEEE80211_TX_CTRL_FAST_XMIT) { |
| struct sta_info *sta = container_of(txq->sta, struct sta_info, |
| sta); |
| u8 pn_offs = 0; |
| |
| if (tx.key && |
| (tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) |
| pn_offs = ieee80211_hdrlen(hdr->frame_control); |
| |
| r = ieee80211_xmit_fast_finish(sta->sdata, sta, pn_offs, |
| tx.key, &tx); |
| if (r != TX_CONTINUE) { |
| ieee80211_free_txskb(&local->hw, skb); |
| goto begin; |
| } |
| } else { |
| if (invoke_tx_handlers_late(&tx)) |
| goto begin; |
| |
| skb = __skb_dequeue(&tx.skbs); |
| |
| if (!skb_queue_empty(&tx.skbs)) { |
| spin_lock_bh(&fq->lock); |
| skb_queue_splice_tail(&tx.skbs, &txqi->frags); |
| spin_unlock_bh(&fq->lock); |
| } |
| } |
| |
| if (skb_has_frag_list(skb) && |
| !ieee80211_hw_check(&local->hw, TX_FRAG_LIST)) { |
| if (skb_linearize(skb)) { |
| ieee80211_free_txskb(&local->hw, skb); |
| goto begin; |
| } |
| } |
| |
| switch (tx.sdata->vif.type) { |
| case NL80211_IFTYPE_MONITOR: |
| if (tx.sdata->u.mntr.flags & MONITOR_FLAG_ACTIVE) { |
| vif = &tx.sdata->vif; |
| break; |
| } |
| tx.sdata = rcu_dereference(local->monitor_sdata); |
| if (tx.sdata) { |
| vif = &tx.sdata->vif; |
| info->hw_queue = |
| vif->hw_queue[skb_get_queue_mapping(skb)]; |
| } else if (ieee80211_hw_check(&local->hw, QUEUE_CONTROL)) { |
| ieee80211_free_txskb(&local->hw, skb); |
| goto begin; |
| } else { |
| vif = NULL; |
| } |
| break; |
| case NL80211_IFTYPE_AP_VLAN: |
| tx.sdata = container_of(tx.sdata->bss, |
| struct ieee80211_sub_if_data, u.ap); |
| fallthrough; |
| default: |
| vif = &tx.sdata->vif; |
| break; |
| } |
| |
| encap_out: |
| IEEE80211_SKB_CB(skb)->control.vif = vif; |
| |
| if (vif && |
| wiphy_ext_feature_isset(local->hw.wiphy, NL80211_EXT_FEATURE_AQL)) { |
| bool ampdu = txq->ac != IEEE80211_AC_VO; |
| u32 airtime; |
| |
| airtime = ieee80211_calc_expected_tx_airtime(hw, vif, txq->sta, |
| skb->len, ampdu); |
| if (airtime) { |
| airtime = ieee80211_info_set_tx_time_est(info, airtime); |
| ieee80211_sta_update_pending_airtime(local, tx.sta, |
| txq->ac, |
| airtime, |
| false); |
| } |
| } |
| |
| return skb; |
| |
| out: |
| spin_unlock_bh(&fq->lock); |
| |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_tx_dequeue); |
| |
| struct ieee80211_txq *ieee80211_next_txq(struct ieee80211_hw *hw, u8 ac) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct airtime_sched_info *air_sched; |
| u64 now = ktime_get_boottime_ns(); |
| struct ieee80211_txq *ret = NULL; |
| struct airtime_info *air_info; |
| struct txq_info *txqi = NULL; |
| struct rb_node *node; |
| bool first = false; |
| |
| air_sched = &local->airtime[ac]; |
| spin_lock_bh(&air_sched->lock); |
| |
| node = air_sched->schedule_pos; |
| |
| begin: |
| if (!node) { |
| node = rb_first_cached(&air_sched->active_txqs); |
| first = true; |
| } else { |
| node = rb_next(node); |
| } |
| |
| if (!node) |
| goto out; |
| |
| txqi = container_of(node, struct txq_info, schedule_order); |
| air_info = to_airtime_info(&txqi->txq); |
| |
| if (air_info->v_t > air_sched->v_t && |
| (!first || !airtime_catchup_v_t(air_sched, air_info->v_t, now))) |
| goto out; |
| |
| if (!ieee80211_txq_airtime_check(hw, &txqi->txq)) { |
| first = false; |
| goto begin; |
| } |
| |
| air_sched->schedule_pos = node; |
| air_sched->last_schedule_activity = now; |
| ret = &txqi->txq; |
| out: |
| spin_unlock_bh(&air_sched->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL(ieee80211_next_txq); |
| |
| static void __ieee80211_insert_txq(struct rb_root_cached *root, |
| struct txq_info *txqi) |
| { |
| struct rb_node **new = &root->rb_root.rb_node; |
| struct airtime_info *old_air, *new_air; |
| struct rb_node *parent = NULL; |
| struct txq_info *__txqi; |
| bool leftmost = true; |
| |
| while (*new) { |
| parent = *new; |
| __txqi = rb_entry(parent, struct txq_info, schedule_order); |
| old_air = to_airtime_info(&__txqi->txq); |
| new_air = to_airtime_info(&txqi->txq); |
| |
| if (new_air->v_t <= old_air->v_t) { |
| new = &parent->rb_left; |
| } else { |
| new = &parent->rb_right; |
| leftmost = false; |
| } |
| } |
| |
| rb_link_node(&txqi->schedule_order, parent, new); |
| rb_insert_color_cached(&txqi->schedule_order, root, leftmost); |
| } |
| |
| void ieee80211_resort_txq(struct ieee80211_hw *hw, |
| struct ieee80211_txq *txq) |
| { |
| struct airtime_info *air_info = to_airtime_info(txq); |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct txq_info *txqi = to_txq_info(txq); |
| struct airtime_sched_info *air_sched; |
| |
| air_sched = &local->airtime[txq->ac]; |
| |
| lockdep_assert_held(&air_sched->lock); |
| |
| if (!RB_EMPTY_NODE(&txqi->schedule_order)) { |
| struct airtime_info *a_prev = NULL, *a_next = NULL; |
| struct txq_info *t_prev, *t_next; |
| struct rb_node *n_prev, *n_next; |
| |
| /* Erasing a node can cause an expensive rebalancing operation, |
| * so we check the previous and next nodes first and only remove |
| * and re-insert if the current node is not already in the |
| * correct position. |
| */ |
| if ((n_prev = rb_prev(&txqi->schedule_order)) != NULL) { |
| t_prev = container_of(n_prev, struct txq_info, |
| schedule_order); |
| a_prev = to_airtime_info(&t_prev->txq); |
| } |
| |
| if ((n_next = rb_next(&txqi->schedule_order)) != NULL) { |
| t_next = container_of(n_next, struct txq_info, |
| schedule_order); |
| a_next = to_airtime_info(&t_next->txq); |
| } |
| |
| if ((!a_prev || a_prev->v_t <= air_info->v_t) && |
| (!a_next || a_next->v_t > air_info->v_t)) |
| return; |
| |
| if (air_sched->schedule_pos == &txqi->schedule_order) |
| air_sched->schedule_pos = n_prev; |
| |
| rb_erase_cached(&txqi->schedule_order, |
| &air_sched->active_txqs); |
| RB_CLEAR_NODE(&txqi->schedule_order); |
| __ieee80211_insert_txq(&air_sched->active_txqs, txqi); |
| } |
| } |
| |
| void ieee80211_update_airtime_weight(struct ieee80211_local *local, |
| struct airtime_sched_info *air_sched, |
| u64 now, bool force) |
| { |
| struct airtime_info *air_info, *tmp; |
| u64 weight_sum = 0; |
| |
| if (unlikely(!now)) |
| now = ktime_get_boottime_ns(); |
| |
| lockdep_assert_held(&air_sched->lock); |
| |
| if (!force && (air_sched->last_weight_update < |
| now - AIRTIME_ACTIVE_DURATION)) |
| return; |
| |
| list_for_each_entry_safe(air_info, tmp, |
| &air_sched->active_list, list) { |
| if (airtime_is_active(air_info, now)) |
| weight_sum += air_info->weight; |
| else |
| list_del_init(&air_info->list); |
| } |
| airtime_weight_sum_set(air_sched, weight_sum); |
| air_sched->last_weight_update = now; |
| } |
| |
| void ieee80211_schedule_txq(struct ieee80211_hw *hw, |
| struct ieee80211_txq *txq) |
| __acquires(txq_lock) __releases(txq_lock) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct txq_info *txqi = to_txq_info(txq); |
| struct airtime_sched_info *air_sched; |
| u64 now = ktime_get_boottime_ns(); |
| struct airtime_info *air_info; |
| u8 ac = txq->ac; |
| bool was_active; |
| |
| air_sched = &local->airtime[ac]; |
| air_info = to_airtime_info(txq); |
| |
| spin_lock_bh(&air_sched->lock); |
| was_active = airtime_is_active(air_info, now); |
| airtime_set_active(air_sched, air_info, now); |
| |
| if (!RB_EMPTY_NODE(&txqi->schedule_order)) |
| goto out; |
| |
| /* If the station has been inactive for a while, catch up its v_t so it |
| * doesn't get indefinite priority; see comment above the definition of |
| * AIRTIME_MAX_BEHIND. |
| */ |
| if ((!was_active && air_info->v_t < air_sched->v_t) || |
| air_info->v_t < air_sched->v_t - AIRTIME_MAX_BEHIND) |
| air_info->v_t = air_sched->v_t; |
| |
| ieee80211_update_airtime_weight(local, air_sched, now, !was_active); |
| __ieee80211_insert_txq(&air_sched->active_txqs, txqi); |
| |
| out: |
| spin_unlock_bh(&air_sched->lock); |
| } |
| EXPORT_SYMBOL(ieee80211_schedule_txq); |
| |
| static void __ieee80211_unschedule_txq(struct ieee80211_hw *hw, |
| struct ieee80211_txq *txq, |
| bool purge) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct txq_info *txqi = to_txq_info(txq); |
| struct airtime_sched_info *air_sched; |
| struct airtime_info *air_info; |
| |
| air_sched = &local->airtime[txq->ac]; |
| air_info = to_airtime_info(&txqi->txq); |
| |
| lockdep_assert_held(&air_sched->lock); |
| |
| if (purge) { |
| list_del_init(&air_info->list); |
| ieee80211_update_airtime_weight(local, air_sched, 0, true); |
| } |
| |
| if (RB_EMPTY_NODE(&txqi->schedule_order)) |
| return; |
| |
| if (air_sched->schedule_pos == &txqi->schedule_order) |
| air_sched->schedule_pos = rb_prev(&txqi->schedule_order); |
| |
| if (!purge) |
| airtime_set_active(air_sched, air_info, |
| ktime_get_boottime_ns()); |
| |
| rb_erase_cached(&txqi->schedule_order, |
| &air_sched->active_txqs); |
| RB_CLEAR_NODE(&txqi->schedule_order); |
| } |
| |
| void ieee80211_unschedule_txq(struct ieee80211_hw *hw, |
| struct ieee80211_txq *txq, |
| bool purge) |
| __acquires(txq_lock) __releases(txq_lock) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| |
| spin_lock_bh(&local->airtime[txq->ac].lock); |
| __ieee80211_unschedule_txq(hw, txq, purge); |
| spin_unlock_bh(&local->airtime[txq->ac].lock); |
| } |
| |
| void ieee80211_return_txq(struct ieee80211_hw *hw, |
| struct ieee80211_txq *txq, bool force) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct txq_info *txqi = to_txq_info(txq); |
| |
| spin_lock_bh(&local->airtime[txq->ac].lock); |
| |
| if (!RB_EMPTY_NODE(&txqi->schedule_order) && !force && |
| !txq_has_queue(txq)) |
| __ieee80211_unschedule_txq(hw, txq, false); |
| |
| spin_unlock_bh(&local->airtime[txq->ac].lock); |
| } |
| EXPORT_SYMBOL(ieee80211_return_txq); |
| |
| DEFINE_STATIC_KEY_FALSE(aql_disable); |
| |
| bool ieee80211_txq_airtime_check(struct ieee80211_hw *hw, |
| struct ieee80211_txq *txq) |
| { |
| struct airtime_info *air_info = to_airtime_info(txq); |
| struct ieee80211_local *local = hw_to_local(hw); |
| |
| if (!wiphy_ext_feature_isset(local->hw.wiphy, NL80211_EXT_FEATURE_AQL)) |
| return true; |
| |
| if (static_branch_unlikely(&aql_disable)) |
| return true; |
| |
| if (!txq->sta) |
| return true; |
| |
| if (unlikely(txq->tid == IEEE80211_NUM_TIDS)) |
| return true; |
| |
| if (atomic_read(&air_info->aql_tx_pending) < air_info->aql_limit_low) |
| return true; |
| |
| if (atomic_read(&local->aql_total_pending_airtime) < |
| local->aql_threshold && |
| atomic_read(&air_info->aql_tx_pending) < air_info->aql_limit_high) |
| return true; |
| |
| return false; |
| } |
| EXPORT_SYMBOL(ieee80211_txq_airtime_check); |
| |
| bool ieee80211_txq_may_transmit(struct ieee80211_hw *hw, |
| struct ieee80211_txq *txq) |
| { |
| struct txq_info *first_txqi = NULL, *txqi = to_txq_info(txq); |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct airtime_sched_info *air_sched; |
| struct airtime_info *air_info; |
| struct rb_node *node = NULL; |
| bool ret = false; |
| u64 now; |
| |
| |
| if (!ieee80211_txq_airtime_check(hw, txq)) |
| return false; |
| |
| air_sched = &local->airtime[txq->ac]; |
| spin_lock_bh(&air_sched->lock); |
| |
| if (RB_EMPTY_NODE(&txqi->schedule_order)) |
| goto out; |
| |
| now = ktime_get_boottime_ns(); |
| |
| /* Like in ieee80211_next_txq(), make sure the first station in the |
| * scheduling order is eligible for transmission to avoid starvation. |
| */ |
| node = rb_first_cached(&air_sched->active_txqs); |
| if (node) { |
| first_txqi = container_of(node, struct txq_info, |
| schedule_order); |
| air_info = to_airtime_info(&first_txqi->txq); |
| |
| if (air_sched->v_t < air_info->v_t) |
| airtime_catchup_v_t(air_sched, air_info->v_t, now); |
| } |
| |
| air_info = to_airtime_info(&txqi->txq); |
| if (air_info->v_t <= air_sched->v_t) { |
| air_sched->last_schedule_activity = now; |
| ret = true; |
| } |
| |
| out: |
| spin_unlock_bh(&air_sched->lock); |
| return ret; |
| } |
| EXPORT_SYMBOL(ieee80211_txq_may_transmit); |
| |
| void ieee80211_txq_schedule_start(struct ieee80211_hw *hw, u8 ac) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct airtime_sched_info *air_sched = &local->airtime[ac]; |
| |
| spin_lock_bh(&air_sched->lock); |
| air_sched->schedule_pos = NULL; |
| spin_unlock_bh(&air_sched->lock); |
| } |
| EXPORT_SYMBOL(ieee80211_txq_schedule_start); |
| |
| void __ieee80211_subif_start_xmit(struct sk_buff *skb, |
| struct net_device *dev, |
| u32 info_flags, |
| u32 ctrl_flags, |
| u64 *cookie) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta; |
| struct sk_buff *next; |
| |
| if (unlikely(skb->len < ETH_HLEN)) { |
| kfree_skb(skb); |
| return; |
| } |
| |
| rcu_read_lock(); |
| |
| if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) |
| goto out_free; |
| |
| if (IS_ERR(sta)) |
| sta = NULL; |
| |
| if (local->ops->wake_tx_queue) { |
| u16 queue = __ieee80211_select_queue(sdata, sta, skb); |
| skb_set_queue_mapping(skb, queue); |
| skb_get_hash(skb); |
| } |
| |
| ieee80211_aggr_check(sdata, sta, skb); |
| |
| if (sta) { |
| struct ieee80211_fast_tx *fast_tx; |
| |
| sk_pacing_shift_update(skb->sk, sdata->local->hw.tx_sk_pacing_shift); |
| |
| fast_tx = rcu_dereference(sta->fast_tx); |
| |
| if (fast_tx && |
| ieee80211_xmit_fast(sdata, sta, fast_tx, skb)) |
| goto out; |
| } |
| |
| if (skb_is_gso(skb)) { |
| struct sk_buff *segs; |
| |
| segs = skb_gso_segment(skb, 0); |
| if (IS_ERR(segs)) { |
| goto out_free; |
| } else if (segs) { |
| consume_skb(skb); |
| skb = segs; |
| } |
| } else { |
| /* we cannot process non-linear frames on this path */ |
| if (skb_linearize(skb)) { |
| kfree_skb(skb); |
| goto out; |
| } |
| |
| /* the frame could be fragmented, software-encrypted, and other |
| * things so we cannot really handle checksum offload with it - |
| * fix it up in software before we handle anything else. |
| */ |
| if (skb->ip_summed == CHECKSUM_PARTIAL) { |
| skb_set_transport_header(skb, |
| skb_checksum_start_offset(skb)); |
| if (skb_checksum_help(skb)) |
| goto out_free; |
| } |
| } |
| |
| skb_list_walk_safe(skb, skb, next) { |
| skb_mark_not_on_list(skb); |
| |
| if (skb->protocol == sdata->control_port_protocol) |
| ctrl_flags |= IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP; |
| |
| skb = ieee80211_build_hdr(sdata, skb, info_flags, |
| sta, ctrl_flags, cookie); |
| if (IS_ERR(skb)) { |
| kfree_skb_list(next); |
| goto out; |
| } |
| |
| dev_sw_netstats_tx_add(dev, 1, skb->len); |
| |
| ieee80211_xmit(sdata, sta, skb); |
| } |
| goto out; |
| out_free: |
| kfree_skb(skb); |
| out: |
| rcu_read_unlock(); |
| } |
| |
| static int ieee80211_change_da(struct sk_buff *skb, struct sta_info *sta) |
| { |
| struct ethhdr *eth; |
| int err; |
| |
| err = skb_ensure_writable(skb, ETH_HLEN); |
| if (unlikely(err)) |
| return err; |
| |
| eth = (void *)skb->data; |
| ether_addr_copy(eth->h_dest, sta->sta.addr); |
| |
| return 0; |
| } |
| |
| static bool ieee80211_multicast_to_unicast(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| const struct ethhdr *eth = (void *)skb->data; |
| const struct vlan_ethhdr *ethvlan = (void *)skb->data; |
| __be16 ethertype; |
| |
| if (likely(!is_multicast_ether_addr(eth->h_dest))) |
| return false; |
| |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_AP_VLAN: |
| if (sdata->u.vlan.sta) |
| return false; |
| if (sdata->wdev.use_4addr) |
| return false; |
| fallthrough; |
| case NL80211_IFTYPE_AP: |
| /* check runtime toggle for this bss */ |
| if (!sdata->bss->multicast_to_unicast) |
| return false; |
| break; |
| default: |
| return false; |
| } |
| |
| /* multicast to unicast conversion only for some payload */ |
| ethertype = eth->h_proto; |
| if (ethertype == htons(ETH_P_8021Q) && skb->len >= VLAN_ETH_HLEN) |
| ethertype = ethvlan->h_vlan_encapsulated_proto; |
| switch (ethertype) { |
| case htons(ETH_P_ARP): |
| case htons(ETH_P_IP): |
| case htons(ETH_P_IPV6): |
| break; |
| default: |
| return false; |
| } |
| |
| return true; |
| } |
| |
| static void |
| ieee80211_convert_to_unicast(struct sk_buff *skb, struct net_device *dev, |
| struct sk_buff_head *queue) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| struct ieee80211_local *local = sdata->local; |
| const struct ethhdr *eth = (struct ethhdr *)skb->data; |
| struct sta_info *sta, *first = NULL; |
| struct sk_buff *cloned_skb; |
| |
| rcu_read_lock(); |
| |
| list_for_each_entry_rcu(sta, &local->sta_list, list) { |
| if (sdata != sta->sdata) |
| /* AP-VLAN mismatch */ |
| continue; |
| if (unlikely(ether_addr_equal(eth->h_source, sta->sta.addr))) |
| /* do not send back to source */ |
| continue; |
| if (!first) { |
| first = sta; |
| continue; |
| } |
| cloned_skb = skb_clone(skb, GFP_ATOMIC); |
| if (!cloned_skb) |
| goto multicast; |
| if (unlikely(ieee80211_change_da(cloned_skb, sta))) { |
| dev_kfree_skb(cloned_skb); |
| goto multicast; |
| } |
| __skb_queue_tail(queue, cloned_skb); |
| } |
| |
| if (likely(first)) { |
| if (unlikely(ieee80211_change_da(skb, first))) |
| goto multicast; |
| __skb_queue_tail(queue, skb); |
| } else { |
| /* no STA connected, drop */ |
| kfree_skb(skb); |
| skb = NULL; |
| } |
| |
| goto out; |
| multicast: |
| __skb_queue_purge(queue); |
| __skb_queue_tail(queue, skb); |
| out: |
| rcu_read_unlock(); |
| } |
| |
| /** |
| * ieee80211_subif_start_xmit - netif start_xmit function for 802.3 vifs |
| * @skb: packet to be sent |
| * @dev: incoming interface |
| * |
| * On failure skb will be freed. |
| */ |
| netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| if (unlikely(ieee80211_multicast_to_unicast(skb, dev))) { |
| struct sk_buff_head queue; |
| |
| __skb_queue_head_init(&queue); |
| ieee80211_convert_to_unicast(skb, dev, &queue); |
| while ((skb = __skb_dequeue(&queue))) |
| __ieee80211_subif_start_xmit(skb, dev, 0, 0, NULL); |
| } else { |
| __ieee80211_subif_start_xmit(skb, dev, 0, 0, NULL); |
| } |
| |
| return NETDEV_TX_OK; |
| } |
| |
| static bool ieee80211_tx_8023(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, int led_len, |
| struct sta_info *sta, |
| bool txpending) |
| { |
| struct ieee80211_local *local = sdata->local; |
| struct ieee80211_tx_control control = {}; |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_sta *pubsta = NULL; |
| unsigned long flags; |
| int q = info->hw_queue; |
| |
| if (sta) |
| sk_pacing_shift_update(skb->sk, local->hw.tx_sk_pacing_shift); |
| |
| if (ieee80211_queue_skb(local, sdata, sta, skb)) |
| return true; |
| |
| spin_lock_irqsave(&local->queue_stop_reason_lock, flags); |
| |
| if (local->queue_stop_reasons[q] || |
| (!txpending && !skb_queue_empty(&local->pending[q]))) { |
| if (txpending) |
| skb_queue_head(&local->pending[q], skb); |
| else |
| skb_queue_tail(&local->pending[q], skb); |
| |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); |
| |
| return false; |
| } |
| |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); |
| |
| if (sta && sta->uploaded) |
| pubsta = &sta->sta; |
| |
| control.sta = pubsta; |
| |
| drv_tx(local, &control, skb); |
| |
| return true; |
| } |
| |
| static void ieee80211_8023_xmit(struct ieee80211_sub_if_data *sdata, |
| struct net_device *dev, struct sta_info *sta, |
| struct ieee80211_key *key, struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_local *local = sdata->local; |
| struct tid_ampdu_tx *tid_tx; |
| u8 tid; |
| |
| if (local->ops->wake_tx_queue) { |
| u16 queue = __ieee80211_select_queue(sdata, sta, skb); |
| skb_set_queue_mapping(skb, queue); |
| skb_get_hash(skb); |
| } |
| |
| if (unlikely(test_bit(SCAN_SW_SCANNING, &local->scanning)) && |
| test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) |
| goto out_free; |
| |
| memset(info, 0, sizeof(*info)); |
| |
| ieee80211_aggr_check(sdata, sta, skb); |
| |
| tid = skb->priority & IEEE80211_QOS_CTL_TAG1D_MASK; |
| tid_tx = rcu_dereference(sta->ampdu_mlme.tid_tx[tid]); |
| if (tid_tx) { |
| if (!test_bit(HT_AGG_STATE_OPERATIONAL, &tid_tx->state)) { |
| /* fall back to non-offload slow path */ |
| __ieee80211_subif_start_xmit(skb, dev, 0, 0, NULL); |
| return; |
| } |
| |
| info->flags |= IEEE80211_TX_CTL_AMPDU; |
| if (tid_tx->timeout) |
| tid_tx->last_tx = jiffies; |
| } |
| |
| if (unlikely(skb->sk && |
| skb_shinfo(skb)->tx_flags & SKBTX_WIFI_STATUS)) |
| info->ack_frame_id = ieee80211_store_ack_skb(local, skb, |
| &info->flags, NULL); |
| |
| info->hw_queue = sdata->vif.hw_queue[skb_get_queue_mapping(skb)]; |
| |
| dev_sw_netstats_tx_add(dev, 1, skb->len); |
| |
| sta->tx_stats.bytes[skb_get_queue_mapping(skb)] += skb->len; |
| sta->tx_stats.packets[skb_get_queue_mapping(skb)]++; |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) |
| sdata = container_of(sdata->bss, |
| struct ieee80211_sub_if_data, u.ap); |
| |
| info->flags |= IEEE80211_TX_CTL_HW_80211_ENCAP; |
| info->control.vif = &sdata->vif; |
| |
| if (key) |
| info->control.hw_key = &key->conf; |
| |
| ieee80211_tx_8023(sdata, skb, skb->len, sta, false); |
| |
| return; |
| |
| out_free: |
| kfree_skb(skb); |
| } |
| |
| netdev_tx_t ieee80211_subif_start_xmit_8023(struct sk_buff *skb, |
| struct net_device *dev) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| struct ethhdr *ehdr = (struct ethhdr *)skb->data; |
| struct ieee80211_key *key; |
| struct sta_info *sta; |
| |
| if (unlikely(skb->len < ETH_HLEN)) { |
| kfree_skb(skb); |
| return NETDEV_TX_OK; |
| } |
| |
| rcu_read_lock(); |
| |
| if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) { |
| kfree_skb(skb); |
| goto out; |
| } |
| |
| if (unlikely(IS_ERR_OR_NULL(sta) || !sta->uploaded || |
| !test_sta_flag(sta, WLAN_STA_AUTHORIZED) || |
| sdata->control_port_protocol == ehdr->h_proto)) |
| goto skip_offload; |
| |
| key = rcu_dereference(sta->ptk[sta->ptk_idx]); |
| if (!key) |
| key = rcu_dereference(sdata->default_unicast_key); |
| |
| if (key && (!(key->flags & KEY_FLAG_UPLOADED_TO_HARDWARE) || |
| key->conf.cipher == WLAN_CIPHER_SUITE_TKIP)) |
| goto skip_offload; |
| |
| ieee80211_8023_xmit(sdata, dev, sta, key, skb); |
| goto out; |
| |
| skip_offload: |
| ieee80211_subif_start_xmit(skb, dev); |
| out: |
| rcu_read_unlock(); |
| |
| return NETDEV_TX_OK; |
| } |
| |
| struct sk_buff * |
| ieee80211_build_data_template(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, u32 info_flags) |
| { |
| struct ieee80211_hdr *hdr; |
| struct ieee80211_tx_data tx = { |
| .local = sdata->local, |
| .sdata = sdata, |
| }; |
| struct sta_info *sta; |
| |
| rcu_read_lock(); |
| |
| if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) { |
| kfree_skb(skb); |
| skb = ERR_PTR(-EINVAL); |
| goto out; |
| } |
| |
| skb = ieee80211_build_hdr(sdata, skb, info_flags, sta, 0, NULL); |
| if (IS_ERR(skb)) |
| goto out; |
| |
| hdr = (void *)skb->data; |
| tx.sta = sta_info_get(sdata, hdr->addr1); |
| tx.skb = skb; |
| |
| if (ieee80211_tx_h_select_key(&tx) != TX_CONTINUE) { |
| rcu_read_unlock(); |
| kfree_skb(skb); |
| return ERR_PTR(-EINVAL); |
| } |
| |
| out: |
| rcu_read_unlock(); |
| return skb; |
| } |
| |
| /* |
| * ieee80211_clear_tx_pending may not be called in a context where |
| * it is possible that it packets could come in again. |
| */ |
| void ieee80211_clear_tx_pending(struct ieee80211_local *local) |
| { |
| struct sk_buff *skb; |
| int i; |
| |
| for (i = 0; i < local->hw.queues; i++) { |
| while ((skb = skb_dequeue(&local->pending[i])) != NULL) |
| ieee80211_free_txskb(&local->hw, skb); |
| } |
| } |
| |
| /* |
| * Returns false if the frame couldn't be transmitted but was queued instead, |
| * which in this case means re-queued -- take as an indication to stop sending |
| * more pending frames. |
| */ |
| static bool ieee80211_tx_pending_skb(struct ieee80211_local *local, |
| struct sk_buff *skb) |
| { |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| struct ieee80211_sub_if_data *sdata; |
| struct sta_info *sta; |
| struct ieee80211_hdr *hdr; |
| bool result; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| |
| sdata = vif_to_sdata(info->control.vif); |
| |
| if (info->control.flags & IEEE80211_TX_INTCFL_NEED_TXPROCESSING) { |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| if (unlikely(!chanctx_conf)) { |
| dev_kfree_skb(skb); |
| return true; |
| } |
| info->band = chanctx_conf->def.chan->band; |
| result = ieee80211_tx(sdata, NULL, skb, true); |
| } else if (info->flags & IEEE80211_TX_CTL_HW_80211_ENCAP) { |
| if (ieee80211_lookup_ra_sta(sdata, skb, &sta)) { |
| dev_kfree_skb(skb); |
| return true; |
| } |
| |
| if (IS_ERR(sta) || (sta && !sta->uploaded)) |
| sta = NULL; |
| |
| result = ieee80211_tx_8023(sdata, skb, skb->len, sta, true); |
| } else { |
| struct sk_buff_head skbs; |
| |
| __skb_queue_head_init(&skbs); |
| __skb_queue_tail(&skbs, skb); |
| |
| hdr = (struct ieee80211_hdr *)skb->data; |
| sta = sta_info_get(sdata, hdr->addr1); |
| |
| result = __ieee80211_tx(local, &skbs, skb->len, sta, true); |
| } |
| |
| return result; |
| } |
| |
| /* |
| * Transmit all pending packets. Called from tasklet. |
| */ |
| void ieee80211_tx_pending(struct tasklet_struct *t) |
| { |
| struct ieee80211_local *local = from_tasklet(local, t, |
| tx_pending_tasklet); |
| unsigned long flags; |
| int i; |
| bool txok; |
| |
| rcu_read_lock(); |
| |
| spin_lock_irqsave(&local->queue_stop_reason_lock, flags); |
| for (i = 0; i < local->hw.queues; i++) { |
| /* |
| * If queue is stopped by something other than due to pending |
| * frames, or we have no pending frames, proceed to next queue. |
| */ |
| if (local->queue_stop_reasons[i] || |
| skb_queue_empty(&local->pending[i])) |
| continue; |
| |
| while (!skb_queue_empty(&local->pending[i])) { |
| struct sk_buff *skb = __skb_dequeue(&local->pending[i]); |
| struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); |
| |
| if (WARN_ON(!info->control.vif)) { |
| ieee80211_free_txskb(&local->hw, skb); |
| continue; |
| } |
| |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, |
| flags); |
| |
| txok = ieee80211_tx_pending_skb(local, skb); |
| spin_lock_irqsave(&local->queue_stop_reason_lock, |
| flags); |
| if (!txok) |
| break; |
| } |
| |
| if (skb_queue_empty(&local->pending[i])) |
| ieee80211_propagate_queue_wake(local, i); |
| } |
| spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); |
| |
| rcu_read_unlock(); |
| } |
| |
| /* functions for drivers to get certain frames */ |
| |
| static void __ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, |
| struct ps_data *ps, struct sk_buff *skb, |
| bool is_template) |
| { |
| u8 *pos, *tim; |
| int aid0 = 0; |
| int i, have_bits = 0, n1, n2; |
| |
| /* Generate bitmap for TIM only if there are any STAs in power save |
| * mode. */ |
| if (atomic_read(&ps->num_sta_ps) > 0) |
| /* in the hope that this is faster than |
| * checking byte-for-byte */ |
| have_bits = !bitmap_empty((unsigned long *)ps->tim, |
| IEEE80211_MAX_AID+1); |
| if (!is_template) { |
| if (ps->dtim_count == 0) |
| ps->dtim_count = sdata->vif.bss_conf.dtim_period - 1; |
| else |
| ps->dtim_count--; |
| } |
| |
| tim = pos = skb_put(skb, 6); |
| *pos++ = WLAN_EID_TIM; |
| *pos++ = 4; |
| *pos++ = ps->dtim_count; |
| *pos++ = sdata->vif.bss_conf.dtim_period; |
| |
| if (ps->dtim_count == 0 && !skb_queue_empty(&ps->bc_buf)) |
| aid0 = 1; |
| |
| ps->dtim_bc_mc = aid0 == 1; |
| |
| if (have_bits) { |
| /* Find largest even number N1 so that bits numbered 1 through |
| * (N1 x 8) - 1 in the bitmap are 0 and number N2 so that bits |
| * (N2 + 1) x 8 through 2007 are 0. */ |
| n1 = 0; |
| for (i = 0; i < IEEE80211_MAX_TIM_LEN; i++) { |
| if (ps->tim[i]) { |
| n1 = i & 0xfe; |
| break; |
| } |
| } |
| n2 = n1; |
| for (i = IEEE80211_MAX_TIM_LEN - 1; i >= n1; i--) { |
| if (ps->tim[i]) { |
| n2 = i; |
| break; |
| } |
| } |
| |
| /* Bitmap control */ |
| *pos++ = n1 | aid0; |
| /* Part Virt Bitmap */ |
| skb_put(skb, n2 - n1); |
| memcpy(pos, ps->tim + n1, n2 - n1 + 1); |
| |
| tim[1] = n2 - n1 + 4; |
| } else { |
| *pos++ = aid0; /* Bitmap control */ |
| *pos++ = 0; /* Part Virt Bitmap */ |
| } |
| } |
| |
| static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, |
| struct ps_data *ps, struct sk_buff *skb, |
| bool is_template) |
| { |
| struct ieee80211_local *local = sdata->local; |
| |
| /* |
| * Not very nice, but we want to allow the driver to call |
| * ieee80211_beacon_get() as a response to the set_tim() |
| * callback. That, however, is already invoked under the |
| * sta_lock to guarantee consistent and race-free update |
| * of the tim bitmap in mac80211 and the driver. |
| */ |
| if (local->tim_in_locked_section) { |
| __ieee80211_beacon_add_tim(sdata, ps, skb, is_template); |
| } else { |
| spin_lock_bh(&local->tim_lock); |
| __ieee80211_beacon_add_tim(sdata, ps, skb, is_template); |
| spin_unlock_bh(&local->tim_lock); |
| } |
| |
| return 0; |
| } |
| |
| static void ieee80211_set_beacon_cntdwn(struct ieee80211_sub_if_data *sdata, |
| struct beacon_data *beacon) |
| { |
| u8 *beacon_data, count, max_count = 1; |
| struct probe_resp *resp; |
| size_t beacon_data_len; |
| u16 *bcn_offsets; |
| int i; |
| |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_AP: |
| beacon_data = beacon->tail; |
| beacon_data_len = beacon->tail_len; |
| break; |
| case NL80211_IFTYPE_ADHOC: |
| beacon_data = beacon->head; |
| beacon_data_len = beacon->head_len; |
| break; |
| case NL80211_IFTYPE_MESH_POINT: |
| beacon_data = beacon->head; |
| beacon_data_len = beacon->head_len; |
| break; |
| default: |
| return; |
| } |
| |
| rcu_read_lock(); |
| resp = rcu_dereference(sdata->u.ap.probe_resp); |
| |
| bcn_offsets = beacon->cntdwn_counter_offsets; |
| count = beacon->cntdwn_current_counter; |
| if (sdata->vif.csa_active) |
| max_count = IEEE80211_MAX_CNTDWN_COUNTERS_NUM; |
| |
| for (i = 0; i < max_count; ++i) { |
| if (bcn_offsets[i]) { |
| if (WARN_ON_ONCE(bcn_offsets[i] >= beacon_data_len)) { |
| rcu_read_unlock(); |
| return; |
| } |
| beacon_data[bcn_offsets[i]] = count; |
| } |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP && resp) { |
| u16 *resp_offsets = resp->cntdwn_counter_offsets; |
| |
| resp->data[resp_offsets[i]] = count; |
| } |
| } |
| rcu_read_unlock(); |
| } |
| |
| static u8 __ieee80211_beacon_update_cntdwn(struct beacon_data *beacon) |
| { |
| beacon->cntdwn_current_counter--; |
| |
| /* the counter should never reach 0 */ |
| WARN_ON_ONCE(!beacon->cntdwn_current_counter); |
| |
| return beacon->cntdwn_current_counter; |
| } |
| |
| u8 ieee80211_beacon_update_cntdwn(struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct beacon_data *beacon = NULL; |
| u8 count = 0; |
| |
| rcu_read_lock(); |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP) |
| beacon = rcu_dereference(sdata->u.ap.beacon); |
| else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) |
| beacon = rcu_dereference(sdata->u.ibss.presp); |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) |
| beacon = rcu_dereference(sdata->u.mesh.beacon); |
| |
| if (!beacon) |
| goto unlock; |
| |
| count = __ieee80211_beacon_update_cntdwn(beacon); |
| |
| unlock: |
| rcu_read_unlock(); |
| return count; |
| } |
| EXPORT_SYMBOL(ieee80211_beacon_update_cntdwn); |
| |
| void ieee80211_beacon_set_cntdwn(struct ieee80211_vif *vif, u8 counter) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct beacon_data *beacon = NULL; |
| |
| rcu_read_lock(); |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP) |
| beacon = rcu_dereference(sdata->u.ap.beacon); |
| else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) |
| beacon = rcu_dereference(sdata->u.ibss.presp); |
| else if (ieee80211_vif_is_mesh(&sdata->vif)) |
| beacon = rcu_dereference(sdata->u.mesh.beacon); |
| |
| if (!beacon) |
| goto unlock; |
| |
| if (counter < beacon->cntdwn_current_counter) |
| beacon->cntdwn_current_counter = counter; |
| |
| unlock: |
| rcu_read_unlock(); |
| } |
| EXPORT_SYMBOL(ieee80211_beacon_set_cntdwn); |
| |
| bool ieee80211_beacon_cntdwn_is_complete(struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| struct beacon_data *beacon = NULL; |
| u8 *beacon_data; |
| size_t beacon_data_len; |
| int ret = false; |
| |
| if (!ieee80211_sdata_running(sdata)) |
| return false; |
| |
| rcu_read_lock(); |
| if (vif->type == NL80211_IFTYPE_AP) { |
| struct ieee80211_if_ap *ap = &sdata->u.ap; |
| |
| beacon = rcu_dereference(ap->beacon); |
| if (WARN_ON(!beacon || !beacon->tail)) |
| goto out; |
| beacon_data = beacon->tail; |
| beacon_data_len = beacon->tail_len; |
| } else if (vif->type == NL80211_IFTYPE_ADHOC) { |
| struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; |
| |
| beacon = rcu_dereference(ifibss->presp); |
| if (!beacon) |
| goto out; |
| |
| beacon_data = beacon->head; |
| beacon_data_len = beacon->head_len; |
| } else if (vif->type == NL80211_IFTYPE_MESH_POINT) { |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; |
| |
| beacon = rcu_dereference(ifmsh->beacon); |
| if (!beacon) |
| goto out; |
| |
| beacon_data = beacon->head; |
| beacon_data_len = beacon->head_len; |
| } else { |
| WARN_ON(1); |
| goto out; |
| } |
| |
| if (!beacon->cntdwn_counter_offsets[0]) |
| goto out; |
| |
| if (WARN_ON_ONCE(beacon->cntdwn_counter_offsets[0] > beacon_data_len)) |
| goto out; |
| |
| if (beacon_data[beacon->cntdwn_counter_offsets[0]] == 1) |
| ret = true; |
| |
| out: |
| rcu_read_unlock(); |
| |
| return ret; |
| } |
| EXPORT_SYMBOL(ieee80211_beacon_cntdwn_is_complete); |
| |
| static int ieee80211_beacon_protect(struct sk_buff *skb, |
| struct ieee80211_local *local, |
| struct ieee80211_sub_if_data *sdata) |
| { |
| ieee80211_tx_result res; |
| struct ieee80211_tx_data tx; |
| struct sk_buff *check_skb; |
| |
| memset(&tx, 0, sizeof(tx)); |
| tx.key = rcu_dereference(sdata->default_beacon_key); |
| if (!tx.key) |
| return 0; |
| tx.local = local; |
| tx.sdata = sdata; |
| __skb_queue_head_init(&tx.skbs); |
| __skb_queue_tail(&tx.skbs, skb); |
| res = ieee80211_tx_h_encrypt(&tx); |
| check_skb = __skb_dequeue(&tx.skbs); |
| /* we may crash after this, but it'd be a bug in crypto */ |
| WARN_ON(check_skb != skb); |
| if (WARN_ON_ONCE(res != TX_CONTINUE)) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static struct sk_buff * |
| __ieee80211_beacon_get(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_mutable_offsets *offs, |
| bool is_template) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct beacon_data *beacon = NULL; |
| struct sk_buff *skb = NULL; |
| struct ieee80211_tx_info *info; |
| struct ieee80211_sub_if_data *sdata = NULL; |
| enum nl80211_band band; |
| struct ieee80211_tx_rate_control txrc; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| int csa_off_base = 0; |
| |
| rcu_read_lock(); |
| |
| sdata = vif_to_sdata(vif); |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| |
| if (!ieee80211_sdata_running(sdata) || !chanctx_conf) |
| goto out; |
| |
| if (offs) |
| memset(offs, 0, sizeof(*offs)); |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { |
| struct ieee80211_if_ap *ap = &sdata->u.ap; |
| |
| beacon = rcu_dereference(ap->beacon); |
| if (beacon) { |
| if (beacon->cntdwn_counter_offsets[0]) { |
| if (!is_template) |
| ieee80211_beacon_update_cntdwn(vif); |
| |
| ieee80211_set_beacon_cntdwn(sdata, beacon); |
| } |
| |
| /* |
| * headroom, head length, |
| * tail length and maximum TIM length |
| */ |
| skb = dev_alloc_skb(local->tx_headroom + |
| beacon->head_len + |
| beacon->tail_len + 256 + |
| local->hw.extra_beacon_tailroom); |
| if (!skb) |
| goto out; |
| |
| skb_reserve(skb, local->tx_headroom); |
| skb_put_data(skb, beacon->head, beacon->head_len); |
| |
| ieee80211_beacon_add_tim(sdata, &ap->ps, skb, |
| is_template); |
| |
| if (offs) { |
| offs->tim_offset = beacon->head_len; |
| offs->tim_length = skb->len - beacon->head_len; |
| offs->cntdwn_counter_offs[0] = beacon->cntdwn_counter_offsets[0]; |
| |
| /* for AP the csa offsets are from tail */ |
| csa_off_base = skb->len; |
| } |
| |
| if (beacon->tail) |
| skb_put_data(skb, beacon->tail, |
| beacon->tail_len); |
| |
| if (ieee80211_beacon_protect(skb, local, sdata) < 0) |
| goto out; |
| } else |
| goto out; |
| } else if (sdata->vif.type == NL80211_IFTYPE_ADHOC) { |
| struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; |
| struct ieee80211_hdr *hdr; |
| |
| beacon = rcu_dereference(ifibss->presp); |
| if (!beacon) |
| goto out; |
| |
| if (beacon->cntdwn_counter_offsets[0]) { |
| if (!is_template) |
| __ieee80211_beacon_update_cntdwn(beacon); |
| |
| ieee80211_set_beacon_cntdwn(sdata, beacon); |
| } |
| |
| skb = dev_alloc_skb(local->tx_headroom + beacon->head_len + |
| local->hw.extra_beacon_tailroom); |
| if (!skb) |
| goto out; |
| skb_reserve(skb, local->tx_headroom); |
| skb_put_data(skb, beacon->head, beacon->head_len); |
| |
| hdr = (struct ieee80211_hdr *) skb->data; |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_BEACON); |
| } else if (ieee80211_vif_is_mesh(&sdata->vif)) { |
| struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; |
| |
| beacon = rcu_dereference(ifmsh->beacon); |
| if (!beacon) |
| goto out; |
| |
| if (beacon->cntdwn_counter_offsets[0]) { |
| if (!is_template) |
| /* TODO: For mesh csa_counter is in TU, so |
| * decrementing it by one isn't correct, but |
| * for now we leave it consistent with overall |
| * mac80211's behavior. |
| */ |
| __ieee80211_beacon_update_cntdwn(beacon); |
| |
| ieee80211_set_beacon_cntdwn(sdata, beacon); |
| } |
| |
| if (ifmsh->sync_ops) |
| ifmsh->sync_ops->adjust_tsf(sdata, beacon); |
| |
| skb = dev_alloc_skb(local->tx_headroom + |
| beacon->head_len + |
| 256 + /* TIM IE */ |
| beacon->tail_len + |
| local->hw.extra_beacon_tailroom); |
| if (!skb) |
| goto out; |
| skb_reserve(skb, local->tx_headroom); |
| skb_put_data(skb, beacon->head, beacon->head_len); |
| ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb, is_template); |
| |
| if (offs) { |
| offs->tim_offset = beacon->head_len; |
| offs->tim_length = skb->len - beacon->head_len; |
| } |
| |
| skb_put_data(skb, beacon->tail, beacon->tail_len); |
| } else { |
| WARN_ON(1); |
| goto out; |
| } |
| |
| /* CSA offsets */ |
| if (offs && beacon) { |
| int i; |
| |
| for (i = 0; i < IEEE80211_MAX_CNTDWN_COUNTERS_NUM; i++) { |
| u16 csa_off = beacon->cntdwn_counter_offsets[i]; |
| |
| if (!csa_off) |
| continue; |
| |
| offs->cntdwn_counter_offs[i] = csa_off_base + csa_off; |
| } |
| } |
| |
| band = chanctx_conf->def.chan->band; |
| |
| info = IEEE80211_SKB_CB(skb); |
| |
| info->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| info->flags |= IEEE80211_TX_CTL_NO_ACK; |
| info->band = band; |
| |
| memset(&txrc, 0, sizeof(txrc)); |
| txrc.hw = hw; |
| txrc.sband = local->hw.wiphy->bands[band]; |
| txrc.bss_conf = &sdata->vif.bss_conf; |
| txrc.skb = skb; |
| txrc.reported_rate.idx = -1; |
| if (sdata->beacon_rate_set && sdata->beacon_rateidx_mask[band]) |
| txrc.rate_idx_mask = sdata->beacon_rateidx_mask[band]; |
| else |
| txrc.rate_idx_mask = sdata->rc_rateidx_mask[band]; |
| txrc.bss = true; |
| rate_control_get_rate(sdata, NULL, &txrc); |
| |
| info->control.vif = vif; |
| |
| info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT | |
| IEEE80211_TX_CTL_ASSIGN_SEQ | |
| IEEE80211_TX_CTL_FIRST_FRAGMENT; |
| out: |
| rcu_read_unlock(); |
| return skb; |
| |
| } |
| |
| struct sk_buff * |
| ieee80211_beacon_get_template(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| struct ieee80211_mutable_offsets *offs) |
| { |
| return __ieee80211_beacon_get(hw, vif, offs, true); |
| } |
| EXPORT_SYMBOL(ieee80211_beacon_get_template); |
| |
| struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| u16 *tim_offset, u16 *tim_length) |
| { |
| struct ieee80211_mutable_offsets offs = {}; |
| struct sk_buff *bcn = __ieee80211_beacon_get(hw, vif, &offs, false); |
| struct sk_buff *copy; |
| struct ieee80211_supported_band *sband; |
| int shift; |
| |
| if (!bcn) |
| return bcn; |
| |
| if (tim_offset) |
| *tim_offset = offs.tim_offset; |
| |
| if (tim_length) |
| *tim_length = offs.tim_length; |
| |
| if (ieee80211_hw_check(hw, BEACON_TX_STATUS) || |
| !hw_to_local(hw)->monitors) |
| return bcn; |
| |
| /* send a copy to monitor interfaces */ |
| copy = skb_copy(bcn, GFP_ATOMIC); |
| if (!copy) |
| return bcn; |
| |
| shift = ieee80211_vif_get_shift(vif); |
| sband = ieee80211_get_sband(vif_to_sdata(vif)); |
| if (!sband) |
| return bcn; |
| |
| ieee80211_tx_monitor(hw_to_local(hw), copy, sband, 1, shift, false, |
| NULL); |
| |
| return bcn; |
| } |
| EXPORT_SYMBOL(ieee80211_beacon_get_tim); |
| |
| struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ieee80211_if_ap *ap = NULL; |
| struct sk_buff *skb = NULL; |
| struct probe_resp *presp = NULL; |
| struct ieee80211_hdr *hdr; |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_AP) |
| return NULL; |
| |
| rcu_read_lock(); |
| |
| ap = &sdata->u.ap; |
| presp = rcu_dereference(ap->probe_resp); |
| if (!presp) |
| goto out; |
| |
| skb = dev_alloc_skb(presp->len); |
| if (!skb) |
| goto out; |
| |
| skb_put_data(skb, presp->data, presp->len); |
| |
| hdr = (struct ieee80211_hdr *) skb->data; |
| memset(hdr->addr1, 0, sizeof(hdr->addr1)); |
| |
| out: |
| rcu_read_unlock(); |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_proberesp_get); |
| |
| struct sk_buff *ieee80211_get_fils_discovery_tmpl(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct sk_buff *skb = NULL; |
| struct fils_discovery_data *tmpl = NULL; |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_AP) |
| return NULL; |
| |
| rcu_read_lock(); |
| tmpl = rcu_dereference(sdata->u.ap.fils_discovery); |
| if (!tmpl) { |
| rcu_read_unlock(); |
| return NULL; |
| } |
| |
| skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom + tmpl->len); |
| if (skb) { |
| skb_reserve(skb, sdata->local->hw.extra_tx_headroom); |
| skb_put_data(skb, tmpl->data, tmpl->len); |
| } |
| |
| rcu_read_unlock(); |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_get_fils_discovery_tmpl); |
| |
| struct sk_buff * |
| ieee80211_get_unsol_bcast_probe_resp_tmpl(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct sk_buff *skb = NULL; |
| struct unsol_bcast_probe_resp_data *tmpl = NULL; |
| struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); |
| |
| if (sdata->vif.type != NL80211_IFTYPE_AP) |
| return NULL; |
| |
| rcu_read_lock(); |
| tmpl = rcu_dereference(sdata->u.ap.unsol_bcast_probe_resp); |
| if (!tmpl) { |
| rcu_read_unlock(); |
| return NULL; |
| } |
| |
| skb = dev_alloc_skb(sdata->local->hw.extra_tx_headroom + tmpl->len); |
| if (skb) { |
| skb_reserve(skb, sdata->local->hw.extra_tx_headroom); |
| skb_put_data(skb, tmpl->data, tmpl->len); |
| } |
| |
| rcu_read_unlock(); |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_get_unsol_bcast_probe_resp_tmpl); |
| |
| struct sk_buff *ieee80211_pspoll_get(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ieee80211_sub_if_data *sdata; |
| struct ieee80211_if_managed *ifmgd; |
| struct ieee80211_pspoll *pspoll; |
| struct ieee80211_local *local; |
| struct sk_buff *skb; |
| |
| if (WARN_ON(vif->type != NL80211_IFTYPE_STATION)) |
| return NULL; |
| |
| sdata = vif_to_sdata(vif); |
| ifmgd = &sdata->u.mgd; |
| local = sdata->local; |
| |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*pspoll)); |
| if (!skb) |
| return NULL; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| pspoll = skb_put_zero(skb, sizeof(*pspoll)); |
| pspoll->frame_control = cpu_to_le16(IEEE80211_FTYPE_CTL | |
| IEEE80211_STYPE_PSPOLL); |
| pspoll->aid = cpu_to_le16(sdata->vif.bss_conf.aid); |
| |
| /* aid in PS-Poll has its two MSBs each set to 1 */ |
| pspoll->aid |= cpu_to_le16(1 << 15 | 1 << 14); |
| |
| memcpy(pspoll->bssid, ifmgd->bssid, ETH_ALEN); |
| memcpy(pspoll->ta, vif->addr, ETH_ALEN); |
| |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_pspoll_get); |
| |
| struct sk_buff *ieee80211_nullfunc_get(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif, |
| bool qos_ok) |
| { |
| struct ieee80211_hdr_3addr *nullfunc; |
| struct ieee80211_sub_if_data *sdata; |
| struct ieee80211_if_managed *ifmgd; |
| struct ieee80211_local *local; |
| struct sk_buff *skb; |
| bool qos = false; |
| |
| if (WARN_ON(vif->type != NL80211_IFTYPE_STATION)) |
| return NULL; |
| |
| sdata = vif_to_sdata(vif); |
| ifmgd = &sdata->u.mgd; |
| local = sdata->local; |
| |
| if (qos_ok) { |
| struct sta_info *sta; |
| |
| rcu_read_lock(); |
| sta = sta_info_get(sdata, ifmgd->bssid); |
| qos = sta && sta->sta.wme; |
| rcu_read_unlock(); |
| } |
| |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + |
| sizeof(*nullfunc) + 2); |
| if (!skb) |
| return NULL; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| nullfunc = skb_put_zero(skb, sizeof(*nullfunc)); |
| nullfunc->frame_control = cpu_to_le16(IEEE80211_FTYPE_DATA | |
| IEEE80211_STYPE_NULLFUNC | |
| IEEE80211_FCTL_TODS); |
| if (qos) { |
| __le16 qoshdr = cpu_to_le16(7); |
| |
| BUILD_BUG_ON((IEEE80211_STYPE_QOS_NULLFUNC | |
| IEEE80211_STYPE_NULLFUNC) != |
| IEEE80211_STYPE_QOS_NULLFUNC); |
| nullfunc->frame_control |= |
| cpu_to_le16(IEEE80211_STYPE_QOS_NULLFUNC); |
| skb->priority = 7; |
| skb_set_queue_mapping(skb, IEEE80211_AC_VO); |
| skb_put_data(skb, &qoshdr, sizeof(qoshdr)); |
| } |
| |
| memcpy(nullfunc->addr1, ifmgd->bssid, ETH_ALEN); |
| memcpy(nullfunc->addr2, vif->addr, ETH_ALEN); |
| memcpy(nullfunc->addr3, ifmgd->bssid, ETH_ALEN); |
| |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_nullfunc_get); |
| |
| struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, |
| const u8 *src_addr, |
| const u8 *ssid, size_t ssid_len, |
| size_t tailroom) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct ieee80211_hdr_3addr *hdr; |
| struct sk_buff *skb; |
| size_t ie_ssid_len; |
| u8 *pos; |
| |
| ie_ssid_len = 2 + ssid_len; |
| |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + sizeof(*hdr) + |
| ie_ssid_len + tailroom); |
| if (!skb) |
| return NULL; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| |
| hdr = skb_put_zero(skb, sizeof(*hdr)); |
| hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | |
| IEEE80211_STYPE_PROBE_REQ); |
| eth_broadcast_addr(hdr->addr1); |
| memcpy(hdr->addr2, src_addr, ETH_ALEN); |
| eth_broadcast_addr(hdr->addr3); |
| |
| pos = skb_put(skb, ie_ssid_len); |
| *pos++ = WLAN_EID_SSID; |
| *pos++ = ssid_len; |
| if (ssid_len) |
| memcpy(pos, ssid, ssid_len); |
| pos += ssid_len; |
| |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_probereq_get); |
| |
| void ieee80211_rts_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| const void *frame, size_t frame_len, |
| const struct ieee80211_tx_info *frame_txctl, |
| struct ieee80211_rts *rts) |
| { |
| const struct ieee80211_hdr *hdr = frame; |
| |
| rts->frame_control = |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_RTS); |
| rts->duration = ieee80211_rts_duration(hw, vif, frame_len, |
| frame_txctl); |
| memcpy(rts->ra, hdr->addr1, sizeof(rts->ra)); |
| memcpy(rts->ta, hdr->addr2, sizeof(rts->ta)); |
| } |
| EXPORT_SYMBOL(ieee80211_rts_get); |
| |
| void ieee80211_ctstoself_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif, |
| const void *frame, size_t frame_len, |
| const struct ieee80211_tx_info *frame_txctl, |
| struct ieee80211_cts *cts) |
| { |
| const struct ieee80211_hdr *hdr = frame; |
| |
| cts->frame_control = |
| cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTS); |
| cts->duration = ieee80211_ctstoself_duration(hw, vif, |
| frame_len, frame_txctl); |
| memcpy(cts->ra, hdr->addr1, sizeof(cts->ra)); |
| } |
| EXPORT_SYMBOL(ieee80211_ctstoself_get); |
| |
| struct sk_buff * |
| ieee80211_get_buffered_bc(struct ieee80211_hw *hw, |
| struct ieee80211_vif *vif) |
| { |
| struct ieee80211_local *local = hw_to_local(hw); |
| struct sk_buff *skb = NULL; |
| struct ieee80211_tx_data tx; |
| struct ieee80211_sub_if_data *sdata; |
| struct ps_data *ps; |
| struct ieee80211_tx_info *info; |
| struct ieee80211_chanctx_conf *chanctx_conf; |
| |
| sdata = vif_to_sdata(vif); |
| |
| rcu_read_lock(); |
| chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); |
| |
| if (!chanctx_conf) |
| goto out; |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP) { |
| struct beacon_data *beacon = |
| rcu_dereference(sdata->u.ap.beacon); |
| |
| if (!beacon || !beacon->head) |
| goto out; |
| |
| ps = &sdata->u.ap.ps; |
| } else if (ieee80211_vif_is_mesh(&sdata->vif)) { |
| ps = &sdata->u.mesh.ps; |
| } else { |
| goto out; |
| } |
| |
| if (ps->dtim_count != 0 || !ps->dtim_bc_mc) |
| goto out; /* send buffered bc/mc only after DTIM beacon */ |
| |
| while (1) { |
| skb = skb_dequeue(&ps->bc_buf); |
| if (!skb) |
| goto out; |
| local->total_ps_buffered--; |
| |
| if (!skb_queue_empty(&ps->bc_buf) && skb->len >= 2) { |
| struct ieee80211_hdr *hdr = |
| (struct ieee80211_hdr *) skb->data; |
| /* more buffered multicast/broadcast frames ==> set |
| * MoreData flag in IEEE 802.11 header to inform PS |
| * STAs */ |
| hdr->frame_control |= |
| cpu_to_le16(IEEE80211_FCTL_MOREDATA); |
| } |
| |
| if (sdata->vif.type == NL80211_IFTYPE_AP) |
| sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); |
| if (!ieee80211_tx_prepare(sdata, &tx, NULL, skb)) |
| break; |
| ieee80211_free_txskb(hw, skb); |
| } |
| |
| info = IEEE80211_SKB_CB(skb); |
| |
| tx.flags |= IEEE80211_TX_PS_BUFFERED; |
| info->band = chanctx_conf->def.chan->band; |
| |
| if (invoke_tx_handlers(&tx)) |
| skb = NULL; |
| out: |
| rcu_read_unlock(); |
| |
| return skb; |
| } |
| EXPORT_SYMBOL(ieee80211_get_buffered_bc); |
| |
| int ieee80211_reserve_tid(struct ieee80211_sta *pubsta, u8 tid) |
| { |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| struct ieee80211_local *local = sdata->local; |
| int ret; |
| u32 queues; |
| |
| lockdep_assert_held(&local->sta_mtx); |
| |
| /* only some cases are supported right now */ |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_AP_VLAN: |
| break; |
| default: |
| WARN_ON(1); |
| return -EINVAL; |
| } |
| |
| if (WARN_ON(tid >= IEEE80211_NUM_UPS)) |
| return -EINVAL; |
| |
| if (sta->reserved_tid == tid) { |
| ret = 0; |
| goto out; |
| } |
| |
| if (sta->reserved_tid != IEEE80211_TID_UNRESERVED) { |
| sdata_err(sdata, "TID reservation already active\n"); |
| ret = -EALREADY; |
| goto out; |
| } |
| |
| ieee80211_stop_vif_queues(sdata->local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_RESERVE_TID); |
| |
| synchronize_net(); |
| |
| /* Tear down BA sessions so we stop aggregating on this TID */ |
| if (ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION)) { |
| set_sta_flag(sta, WLAN_STA_BLOCK_BA); |
| __ieee80211_stop_tx_ba_session(sta, tid, |
| AGG_STOP_LOCAL_REQUEST); |
| } |
| |
| queues = BIT(sdata->vif.hw_queue[ieee802_1d_to_ac[tid]]); |
| __ieee80211_flush_queues(local, sdata, queues, false); |
| |
| sta->reserved_tid = tid; |
| |
| ieee80211_wake_vif_queues(local, sdata, |
| IEEE80211_QUEUE_STOP_REASON_RESERVE_TID); |
| |
| if (ieee80211_hw_check(&local->hw, AMPDU_AGGREGATION)) |
| clear_sta_flag(sta, WLAN_STA_BLOCK_BA); |
| |
| ret = 0; |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(ieee80211_reserve_tid); |
| |
| void ieee80211_unreserve_tid(struct ieee80211_sta *pubsta, u8 tid) |
| { |
| struct sta_info *sta = container_of(pubsta, struct sta_info, sta); |
| struct ieee80211_sub_if_data *sdata = sta->sdata; |
| |
| lockdep_assert_held(&sdata->local->sta_mtx); |
| |
| /* only some cases are supported right now */ |
| switch (sdata->vif.type) { |
| case NL80211_IFTYPE_STATION: |
| case NL80211_IFTYPE_AP: |
| case NL80211_IFTYPE_AP_VLAN: |
| break; |
| default: |
| WARN_ON(1); |
| return; |
| } |
| |
| if (tid != sta->reserved_tid) { |
| sdata_err(sdata, "TID to unreserve (%d) isn't reserved\n", tid); |
| return; |
| } |
| |
| sta->reserved_tid = IEEE80211_TID_UNRESERVED; |
| } |
| EXPORT_SYMBOL(ieee80211_unreserve_tid); |
| |
| void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata, |
| struct sk_buff *skb, int tid, |
| enum nl80211_band band) |
| { |
| int ac = ieee80211_ac_from_tid(tid); |
| |
| skb_reset_mac_header(skb); |
| skb_set_queue_mapping(skb, ac); |
| skb->priority = tid; |
| |
| skb->dev = sdata->dev; |
| |
| /* |
| * The other path calling ieee80211_xmit is from the tasklet, |
| * and while we can handle concurrent transmissions locking |
| * requirements are that we do not come into tx with bhs on. |
| */ |
| local_bh_disable(); |
| IEEE80211_SKB_CB(skb)->band = band; |
| ieee80211_xmit(sdata, NULL, skb); |
| local_bh_enable(); |
| } |
| |
| int ieee80211_tx_control_port(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *buf, size_t len, |
| const u8 *dest, __be16 proto, bool unencrypted, |
| u64 *cookie) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| struct ieee80211_local *local = sdata->local; |
| struct sta_info *sta; |
| struct sk_buff *skb; |
| struct ethhdr *ehdr; |
| u32 ctrl_flags = 0; |
| u32 flags = 0; |
| |
| /* Only accept CONTROL_PORT_PROTOCOL configured in CONNECT/ASSOCIATE |
| * or Pre-Authentication |
| */ |
| if (proto != sdata->control_port_protocol && |
| proto != cpu_to_be16(ETH_P_PREAUTH)) |
| return -EINVAL; |
| |
| if (proto == sdata->control_port_protocol) |
| ctrl_flags |= IEEE80211_TX_CTRL_PORT_CTRL_PROTO | |
| IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP; |
| |
| if (unencrypted) |
| flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; |
| |
| if (cookie) |
| ctrl_flags |= IEEE80211_TX_CTL_REQ_TX_STATUS; |
| |
| flags |= IEEE80211_TX_INTFL_NL80211_FRAME_TX; |
| |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + |
| sizeof(struct ethhdr) + len); |
| if (!skb) |
| return -ENOMEM; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom + sizeof(struct ethhdr)); |
| |
| skb_put_data(skb, buf, len); |
| |
| ehdr = skb_push(skb, sizeof(struct ethhdr)); |
| memcpy(ehdr->h_dest, dest, ETH_ALEN); |
| memcpy(ehdr->h_source, sdata->vif.addr, ETH_ALEN); |
| ehdr->h_proto = proto; |
| |
| skb->dev = dev; |
| skb->protocol = proto; |
| skb_reset_network_header(skb); |
| skb_reset_mac_header(skb); |
| |
| /* update QoS header to prioritize control port frames if possible, |
| * priorization also happens for control port frames send over |
| * AF_PACKET |
| */ |
| rcu_read_lock(); |
| |
| if (ieee80211_lookup_ra_sta(sdata, skb, &sta) == 0 && !IS_ERR(sta)) { |
| u16 queue = __ieee80211_select_queue(sdata, sta, skb); |
| |
| skb_set_queue_mapping(skb, queue); |
| skb_get_hash(skb); |
| } |
| |
| rcu_read_unlock(); |
| |
| /* mutex lock is only needed for incrementing the cookie counter */ |
| mutex_lock(&local->mtx); |
| |
| local_bh_disable(); |
| __ieee80211_subif_start_xmit(skb, skb->dev, flags, ctrl_flags, cookie); |
| local_bh_enable(); |
| |
| mutex_unlock(&local->mtx); |
| |
| return 0; |
| } |
| |
| int ieee80211_probe_mesh_link(struct wiphy *wiphy, struct net_device *dev, |
| const u8 *buf, size_t len) |
| { |
| struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); |
| struct ieee80211_local *local = sdata->local; |
| struct sk_buff *skb; |
| |
| skb = dev_alloc_skb(local->hw.extra_tx_headroom + len + |
| 30 + /* header size */ |
| 18); /* 11s header size */ |
| if (!skb) |
| return -ENOMEM; |
| |
| skb_reserve(skb, local->hw.extra_tx_headroom); |
| skb_put_data(skb, buf, len); |
| |
| skb->dev = dev; |
| skb->protocol = htons(ETH_P_802_3); |
| skb_reset_network_header(skb); |
| skb_reset_mac_header(skb); |
| |
| local_bh_disable(); |
| __ieee80211_subif_start_xmit(skb, skb->dev, 0, |
| IEEE80211_TX_CTRL_SKIP_MPATH_LOOKUP, |
| NULL); |
| local_bh_enable(); |
| |
| return 0; |
| } |