| /* |
| * Copyright (C) 2000, 2001 Jeff Dike (jdike@karaya.com) |
| * Licensed under the GPL |
| */ |
| |
| #include "linux/kernel.h" |
| #include "asm/errno.h" |
| #include "linux/sched.h" |
| #include "linux/mm.h" |
| #include "linux/spinlock.h" |
| #include "linux/config.h" |
| #include "linux/init.h" |
| #include "linux/ptrace.h" |
| #include "asm/semaphore.h" |
| #include "asm/pgtable.h" |
| #include "asm/pgalloc.h" |
| #include "asm/tlbflush.h" |
| #include "asm/a.out.h" |
| #include "asm/current.h" |
| #include "asm/irq.h" |
| #include "user_util.h" |
| #include "kern_util.h" |
| #include "kern.h" |
| #include "chan_kern.h" |
| #include "mconsole_kern.h" |
| #include "mem.h" |
| #include "mem_kern.h" |
| |
| int handle_page_fault(unsigned long address, unsigned long ip, |
| int is_write, int is_user, int *code_out) |
| { |
| struct mm_struct *mm = current->mm; |
| struct vm_area_struct *vma; |
| pgd_t *pgd; |
| pud_t *pud; |
| pmd_t *pmd; |
| pte_t *pte; |
| unsigned long page; |
| int err = -EFAULT; |
| |
| *code_out = SEGV_MAPERR; |
| down_read(&mm->mmap_sem); |
| vma = find_vma(mm, address); |
| if(!vma) |
| goto out; |
| else if(vma->vm_start <= address) |
| goto good_area; |
| else if(!(vma->vm_flags & VM_GROWSDOWN)) |
| goto out; |
| else if(is_user && !ARCH_IS_STACKGROW(address)) |
| goto out; |
| else if(expand_stack(vma, address)) |
| goto out; |
| |
| good_area: |
| *code_out = SEGV_ACCERR; |
| if(is_write && !(vma->vm_flags & VM_WRITE)) |
| goto out; |
| |
| if(!(vma->vm_flags & (VM_READ | VM_EXEC))) |
| goto out; |
| |
| page = address & PAGE_MASK; |
| do { |
| survive: |
| switch (handle_mm_fault(mm, vma, address, is_write)){ |
| case VM_FAULT_MINOR: |
| current->min_flt++; |
| break; |
| case VM_FAULT_MAJOR: |
| current->maj_flt++; |
| break; |
| case VM_FAULT_SIGBUS: |
| err = -EACCES; |
| goto out; |
| case VM_FAULT_OOM: |
| err = -ENOMEM; |
| goto out_of_memory; |
| default: |
| BUG(); |
| } |
| pgd = pgd_offset(mm, page); |
| pud = pud_offset(pgd, page); |
| pmd = pmd_offset(pud, page); |
| pte = pte_offset_kernel(pmd, page); |
| } while(!pte_present(*pte)); |
| err = 0; |
| *pte = pte_mkyoung(*pte); |
| if(pte_write(*pte)) *pte = pte_mkdirty(*pte); |
| flush_tlb_page(vma, page); |
| out: |
| up_read(&mm->mmap_sem); |
| return(err); |
| |
| /* |
| * We ran out of memory, or some other thing happened to us that made |
| * us unable to handle the page fault gracefully. |
| */ |
| out_of_memory: |
| if (current->pid == 1) { |
| up_read(&mm->mmap_sem); |
| yield(); |
| down_read(&mm->mmap_sem); |
| goto survive; |
| } |
| goto out; |
| } |
| |
| /* |
| * We give a *copy* of the faultinfo in the regs to segv. |
| * This must be done, since nesting SEGVs could overwrite |
| * the info in the regs. A pointer to the info then would |
| * give us bad data! |
| */ |
| unsigned long segv(struct faultinfo fi, unsigned long ip, int is_user, void *sc) |
| { |
| struct siginfo si; |
| void *catcher; |
| int err; |
| int is_write = FAULT_WRITE(fi); |
| unsigned long address = FAULT_ADDRESS(fi); |
| |
| if(!is_user && (address >= start_vm) && (address < end_vm)){ |
| flush_tlb_kernel_vm(); |
| return(0); |
| } |
| else if(current->mm == NULL) |
| panic("Segfault with no mm"); |
| err = handle_page_fault(address, ip, is_write, is_user, &si.si_code); |
| |
| catcher = current->thread.fault_catcher; |
| if(!err) |
| return(0); |
| else if(catcher != NULL){ |
| current->thread.fault_addr = (void *) address; |
| do_longjmp(catcher, 1); |
| } |
| else if(current->thread.fault_addr != NULL) |
| panic("fault_addr set but no fault catcher"); |
| else if(!is_user && arch_fixup(ip, sc)) |
| return(0); |
| |
| if(!is_user) |
| panic("Kernel mode fault at addr 0x%lx, ip 0x%lx", |
| address, ip); |
| |
| if(err == -EACCES){ |
| si.si_signo = SIGBUS; |
| si.si_errno = 0; |
| si.si_code = BUS_ADRERR; |
| si.si_addr = (void *)address; |
| current->thread.arch.faultinfo = fi; |
| force_sig_info(SIGBUS, &si, current); |
| } |
| else if(err == -ENOMEM){ |
| printk("VM: killing process %s\n", current->comm); |
| do_exit(SIGKILL); |
| } |
| else { |
| si.si_signo = SIGSEGV; |
| si.si_addr = (void *) address; |
| current->thread.arch.faultinfo = fi; |
| force_sig_info(SIGSEGV, &si, current); |
| } |
| return(0); |
| } |
| |
| void bad_segv(struct faultinfo fi, unsigned long ip) |
| { |
| struct siginfo si; |
| |
| si.si_signo = SIGSEGV; |
| si.si_code = SEGV_ACCERR; |
| si.si_addr = (void *) FAULT_ADDRESS(fi); |
| current->thread.arch.faultinfo = fi; |
| force_sig_info(SIGSEGV, &si, current); |
| } |
| |
| void relay_signal(int sig, union uml_pt_regs *regs) |
| { |
| if(arch_handle_signal(sig, regs)) return; |
| if(!UPT_IS_USER(regs)) |
| panic("Kernel mode signal %d", sig); |
| current->thread.arch.faultinfo = *UPT_FAULTINFO(regs); |
| force_sig(sig, current); |
| } |
| |
| void bus_handler(int sig, union uml_pt_regs *regs) |
| { |
| if(current->thread.fault_catcher != NULL) |
| do_longjmp(current->thread.fault_catcher, 1); |
| else relay_signal(sig, regs); |
| } |
| |
| void winch(int sig, union uml_pt_regs *regs) |
| { |
| do_IRQ(WINCH_IRQ, regs); |
| } |
| |
| void trap_init(void) |
| { |
| } |
| |
| DEFINE_SPINLOCK(trap_lock); |
| |
| static int trap_index = 0; |
| |
| int next_trap_index(int limit) |
| { |
| int ret; |
| |
| spin_lock(&trap_lock); |
| ret = trap_index; |
| if(++trap_index == limit) |
| trap_index = 0; |
| spin_unlock(&trap_lock); |
| return(ret); |
| } |
| |
| /* |
| * Overrides for Emacs so that we follow Linus's tabbing style. |
| * Emacs will notice this stuff at the end of the file and automatically |
| * adjust the settings for this buffer only. This must remain at the end |
| * of the file. |
| * --------------------------------------------------------------------------- |
| * Local variables: |
| * c-file-style: "linux" |
| * End: |
| */ |