| // SPDX-License-Identifier: GPL-2.0 |
| /* Copyright(c) 2013 - 2018 Intel Corporation. */ |
| |
| #include <linux/list.h> |
| #include <linux/errno.h> |
| #include <linux/net/intel/i40e_client.h> |
| |
| #include "i40e.h" |
| #include "i40e_prototype.h" |
| |
| static const char i40e_client_interface_version_str[] = I40E_CLIENT_VERSION_STR; |
| static struct i40e_client *registered_client; |
| static LIST_HEAD(i40e_devices); |
| static DEFINE_MUTEX(i40e_device_mutex); |
| |
| static int i40e_client_virtchnl_send(struct i40e_info *ldev, |
| struct i40e_client *client, |
| u32 vf_id, u8 *msg, u16 len); |
| |
| static int i40e_client_setup_qvlist(struct i40e_info *ldev, |
| struct i40e_client *client, |
| struct i40e_qvlist_info *qvlist_info); |
| |
| static void i40e_client_request_reset(struct i40e_info *ldev, |
| struct i40e_client *client, |
| u32 reset_level); |
| |
| static int i40e_client_update_vsi_ctxt(struct i40e_info *ldev, |
| struct i40e_client *client, |
| bool is_vf, u32 vf_id, |
| u32 flag, u32 valid_flag); |
| |
| static struct i40e_ops i40e_lan_ops = { |
| .virtchnl_send = i40e_client_virtchnl_send, |
| .setup_qvlist = i40e_client_setup_qvlist, |
| .request_reset = i40e_client_request_reset, |
| .update_vsi_ctxt = i40e_client_update_vsi_ctxt, |
| }; |
| |
| /** |
| * i40e_client_get_params - Get the params that can change at runtime |
| * @vsi: the VSI with the message |
| * @params: client param struct |
| * |
| **/ |
| static |
| int i40e_client_get_params(struct i40e_vsi *vsi, struct i40e_params *params) |
| { |
| struct i40e_dcbx_config *dcb_cfg = &vsi->back->hw.local_dcbx_config; |
| int i = 0; |
| |
| for (i = 0; i < I40E_MAX_USER_PRIORITY; i++) { |
| u8 tc = dcb_cfg->etscfg.prioritytable[i]; |
| u16 qs_handle; |
| |
| /* If TC is not enabled for VSI use TC0 for UP */ |
| if (!(vsi->tc_config.enabled_tc & BIT(tc))) |
| tc = 0; |
| |
| qs_handle = le16_to_cpu(vsi->info.qs_handle[tc]); |
| params->qos.prio_qos[i].tc = tc; |
| params->qos.prio_qos[i].qs_handle = qs_handle; |
| if (qs_handle == I40E_AQ_VSI_QS_HANDLE_INVALID) { |
| dev_err(&vsi->back->pdev->dev, "Invalid queue set handle for TC = %d, vsi id = %d\n", |
| tc, vsi->id); |
| return -EINVAL; |
| } |
| } |
| |
| params->mtu = vsi->netdev->mtu; |
| return 0; |
| } |
| |
| /** |
| * i40e_notify_client_of_vf_msg - call the client vf message callback |
| * @vsi: the VSI with the message |
| * @vf_id: the absolute VF id that sent the message |
| * @msg: message buffer |
| * @len: length of the message |
| * |
| * If there is a client to this VSI, call the client |
| **/ |
| void |
| i40e_notify_client_of_vf_msg(struct i40e_vsi *vsi, u32 vf_id, u8 *msg, u16 len) |
| { |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_client_instance *cdev = pf->cinst; |
| |
| if (!cdev || !cdev->client) |
| return; |
| if (!cdev->client->ops || !cdev->client->ops->virtchnl_receive) { |
| dev_dbg(&pf->pdev->dev, |
| "Cannot locate client instance virtual channel receive routine\n"); |
| return; |
| } |
| if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) { |
| dev_dbg(&pf->pdev->dev, "Client is not open, abort virtchnl_receive\n"); |
| return; |
| } |
| cdev->client->ops->virtchnl_receive(&cdev->lan_info, cdev->client, |
| vf_id, msg, len); |
| } |
| |
| /** |
| * i40e_notify_client_of_l2_param_changes - call the client notify callback |
| * @vsi: the VSI with l2 param changes |
| * |
| * If there is a client to this VSI, call the client |
| **/ |
| void i40e_notify_client_of_l2_param_changes(struct i40e_vsi *vsi) |
| { |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_client_instance *cdev = pf->cinst; |
| struct i40e_params params; |
| |
| if (!cdev || !cdev->client) |
| return; |
| if (!cdev->client->ops || !cdev->client->ops->l2_param_change) { |
| dev_dbg(&vsi->back->pdev->dev, |
| "Cannot locate client instance l2_param_change routine\n"); |
| return; |
| } |
| if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) { |
| dev_dbg(&vsi->back->pdev->dev, "Client is not open, abort l2 param change\n"); |
| return; |
| } |
| memset(¶ms, 0, sizeof(params)); |
| i40e_client_get_params(vsi, ¶ms); |
| memcpy(&cdev->lan_info.params, ¶ms, sizeof(struct i40e_params)); |
| cdev->client->ops->l2_param_change(&cdev->lan_info, cdev->client, |
| ¶ms); |
| } |
| |
| /** |
| * i40e_client_release_qvlist - release MSI-X vector mapping for client |
| * @ldev: pointer to L2 context. |
| * |
| **/ |
| static void i40e_client_release_qvlist(struct i40e_info *ldev) |
| { |
| struct i40e_qvlist_info *qvlist_info = ldev->qvlist_info; |
| u32 i; |
| |
| if (!ldev->qvlist_info) |
| return; |
| |
| for (i = 0; i < qvlist_info->num_vectors; i++) { |
| struct i40e_pf *pf = ldev->pf; |
| struct i40e_qv_info *qv_info; |
| u32 reg_idx; |
| |
| qv_info = &qvlist_info->qv_info[i]; |
| if (!qv_info) |
| continue; |
| reg_idx = I40E_PFINT_LNKLSTN(qv_info->v_idx - 1); |
| wr32(&pf->hw, reg_idx, I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK); |
| } |
| kfree(ldev->qvlist_info); |
| ldev->qvlist_info = NULL; |
| } |
| |
| /** |
| * i40e_notify_client_of_netdev_close - call the client close callback |
| * @vsi: the VSI with netdev closed |
| * @reset: true when close called due to a reset pending |
| * |
| * If there is a client to this netdev, call the client with close |
| **/ |
| void i40e_notify_client_of_netdev_close(struct i40e_vsi *vsi, bool reset) |
| { |
| struct i40e_pf *pf = vsi->back; |
| struct i40e_client_instance *cdev = pf->cinst; |
| |
| if (!cdev || !cdev->client) |
| return; |
| if (!cdev->client->ops || !cdev->client->ops->close) { |
| dev_dbg(&vsi->back->pdev->dev, |
| "Cannot locate client instance close routine\n"); |
| return; |
| } |
| cdev->client->ops->close(&cdev->lan_info, cdev->client, reset); |
| clear_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state); |
| i40e_client_release_qvlist(&cdev->lan_info); |
| } |
| |
| /** |
| * i40e_notify_client_of_vf_reset - call the client vf reset callback |
| * @pf: PF device pointer |
| * @vf_id: asolute id of VF being reset |
| * |
| * If there is a client attached to this PF, notify when a VF is reset |
| **/ |
| void i40e_notify_client_of_vf_reset(struct i40e_pf *pf, u32 vf_id) |
| { |
| struct i40e_client_instance *cdev = pf->cinst; |
| |
| if (!cdev || !cdev->client) |
| return; |
| if (!cdev->client->ops || !cdev->client->ops->vf_reset) { |
| dev_dbg(&pf->pdev->dev, |
| "Cannot locate client instance VF reset routine\n"); |
| return; |
| } |
| if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) { |
| dev_dbg(&pf->pdev->dev, "Client is not open, abort vf-reset\n"); |
| return; |
| } |
| cdev->client->ops->vf_reset(&cdev->lan_info, cdev->client, vf_id); |
| } |
| |
| /** |
| * i40e_notify_client_of_vf_enable - call the client vf notification callback |
| * @pf: PF device pointer |
| * @num_vfs: the number of VFs currently enabled, 0 for disable |
| * |
| * If there is a client attached to this PF, call its VF notification routine |
| **/ |
| void i40e_notify_client_of_vf_enable(struct i40e_pf *pf, u32 num_vfs) |
| { |
| struct i40e_client_instance *cdev = pf->cinst; |
| |
| if (!cdev || !cdev->client) |
| return; |
| if (!cdev->client->ops || !cdev->client->ops->vf_enable) { |
| dev_dbg(&pf->pdev->dev, |
| "Cannot locate client instance VF enable routine\n"); |
| return; |
| } |
| if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, |
| &cdev->state)) { |
| dev_dbg(&pf->pdev->dev, "Client is not open, abort vf-enable\n"); |
| return; |
| } |
| cdev->client->ops->vf_enable(&cdev->lan_info, cdev->client, num_vfs); |
| } |
| |
| /** |
| * i40e_vf_client_capable - ask the client if it likes the specified VF |
| * @pf: PF device pointer |
| * @vf_id: the VF in question |
| * |
| * If there is a client of the specified type attached to this PF, call |
| * its vf_capable routine |
| **/ |
| int i40e_vf_client_capable(struct i40e_pf *pf, u32 vf_id) |
| { |
| struct i40e_client_instance *cdev = pf->cinst; |
| int capable = false; |
| |
| if (!cdev || !cdev->client) |
| goto out; |
| if (!cdev->client->ops || !cdev->client->ops->vf_capable) { |
| dev_dbg(&pf->pdev->dev, |
| "Cannot locate client instance VF capability routine\n"); |
| goto out; |
| } |
| if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) |
| goto out; |
| |
| capable = cdev->client->ops->vf_capable(&cdev->lan_info, |
| cdev->client, |
| vf_id); |
| out: |
| return capable; |
| } |
| |
| void i40e_client_update_msix_info(struct i40e_pf *pf) |
| { |
| struct i40e_client_instance *cdev = pf->cinst; |
| |
| if (!cdev || !cdev->client) |
| return; |
| |
| cdev->lan_info.msix_count = pf->num_iwarp_msix; |
| cdev->lan_info.msix_entries = &pf->msix_entries[pf->iwarp_base_vector]; |
| } |
| |
| /** |
| * i40e_client_add_instance - add a client instance struct to the instance list |
| * @pf: pointer to the board struct |
| * |
| **/ |
| static void i40e_client_add_instance(struct i40e_pf *pf) |
| { |
| struct i40e_client_instance *cdev = NULL; |
| struct netdev_hw_addr *mac = NULL; |
| struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi]; |
| |
| if (!registered_client || pf->cinst) |
| return; |
| |
| cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); |
| if (!cdev) |
| return; |
| |
| cdev->lan_info.pf = (void *)pf; |
| cdev->lan_info.netdev = vsi->netdev; |
| cdev->lan_info.pcidev = pf->pdev; |
| cdev->lan_info.fid = pf->hw.pf_id; |
| cdev->lan_info.ftype = I40E_CLIENT_FTYPE_PF; |
| cdev->lan_info.hw_addr = pf->hw.hw_addr; |
| cdev->lan_info.ops = &i40e_lan_ops; |
| cdev->lan_info.version.major = I40E_CLIENT_VERSION_MAJOR; |
| cdev->lan_info.version.minor = I40E_CLIENT_VERSION_MINOR; |
| cdev->lan_info.version.build = I40E_CLIENT_VERSION_BUILD; |
| cdev->lan_info.fw_maj_ver = pf->hw.aq.fw_maj_ver; |
| cdev->lan_info.fw_min_ver = pf->hw.aq.fw_min_ver; |
| cdev->lan_info.fw_build = pf->hw.aq.fw_build; |
| set_bit(__I40E_CLIENT_INSTANCE_NONE, &cdev->state); |
| |
| if (i40e_client_get_params(vsi, &cdev->lan_info.params)) { |
| kfree(cdev); |
| cdev = NULL; |
| return; |
| } |
| |
| mac = list_first_entry(&cdev->lan_info.netdev->dev_addrs.list, |
| struct netdev_hw_addr, list); |
| if (mac) |
| ether_addr_copy(cdev->lan_info.lanmac, mac->addr); |
| else |
| dev_err(&pf->pdev->dev, "MAC address list is empty!\n"); |
| |
| cdev->client = registered_client; |
| pf->cinst = cdev; |
| |
| i40e_client_update_msix_info(pf); |
| } |
| |
| /** |
| * i40e_client_del_instance - removes a client instance from the list |
| * @pf: pointer to the board struct |
| * |
| **/ |
| static |
| void i40e_client_del_instance(struct i40e_pf *pf) |
| { |
| kfree(pf->cinst); |
| pf->cinst = NULL; |
| } |
| |
| /** |
| * i40e_client_subtask - client maintenance work |
| * @pf: board private structure |
| **/ |
| void i40e_client_subtask(struct i40e_pf *pf) |
| { |
| struct i40e_client *client = registered_client; |
| struct i40e_client_instance *cdev; |
| struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi]; |
| int ret = 0; |
| |
| if (!test_and_clear_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state)) |
| return; |
| cdev = pf->cinst; |
| |
| /* If we're down or resetting, just bail */ |
| if (test_bit(__I40E_DOWN, pf->state) || |
| test_bit(__I40E_CONFIG_BUSY, pf->state)) |
| return; |
| |
| if (!client || !cdev) |
| return; |
| |
| /* Here we handle client opens. If the client is down, and |
| * the netdev is registered, then open the client. |
| */ |
| if (!test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) { |
| if (vsi->netdev_registered && |
| client->ops && client->ops->open) { |
| set_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state); |
| ret = client->ops->open(&cdev->lan_info, client); |
| if (ret) { |
| /* Remove failed client instance */ |
| clear_bit(__I40E_CLIENT_INSTANCE_OPENED, |
| &cdev->state); |
| i40e_client_del_instance(pf); |
| } |
| } |
| } |
| |
| /* enable/disable PE TCP_ENA flag based on netdev down/up |
| */ |
| if (test_bit(__I40E_VSI_DOWN, vsi->state)) |
| i40e_client_update_vsi_ctxt(&cdev->lan_info, client, |
| 0, 0, 0, |
| I40E_CLIENT_VSI_FLAG_TCP_ENABLE); |
| else |
| i40e_client_update_vsi_ctxt(&cdev->lan_info, client, |
| 0, 0, |
| I40E_CLIENT_VSI_FLAG_TCP_ENABLE, |
| I40E_CLIENT_VSI_FLAG_TCP_ENABLE); |
| } |
| |
| /** |
| * i40e_lan_add_device - add a lan device struct to the list of lan devices |
| * @pf: pointer to the board struct |
| * |
| * Returns 0 on success or none 0 on error |
| **/ |
| int i40e_lan_add_device(struct i40e_pf *pf) |
| { |
| struct i40e_device *ldev; |
| int ret = 0; |
| |
| mutex_lock(&i40e_device_mutex); |
| list_for_each_entry(ldev, &i40e_devices, list) { |
| if (ldev->pf == pf) { |
| ret = -EEXIST; |
| goto out; |
| } |
| } |
| ldev = kzalloc(sizeof(*ldev), GFP_KERNEL); |
| if (!ldev) { |
| ret = -ENOMEM; |
| goto out; |
| } |
| ldev->pf = pf; |
| INIT_LIST_HEAD(&ldev->list); |
| list_add(&ldev->list, &i40e_devices); |
| dev_info(&pf->pdev->dev, "Added LAN device PF%d bus=0x%02x dev=0x%02x func=0x%02x\n", |
| pf->hw.pf_id, pf->hw.bus.bus_id, |
| pf->hw.bus.device, pf->hw.bus.func); |
| |
| /* If a client has already been registered, we need to add an instance |
| * of it to our new LAN device. |
| */ |
| if (registered_client) |
| i40e_client_add_instance(pf); |
| |
| /* Since in some cases register may have happened before a device gets |
| * added, we can schedule a subtask to go initiate the clients if |
| * they can be launched at probe time. |
| */ |
| set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state); |
| i40e_service_event_schedule(pf); |
| |
| out: |
| mutex_unlock(&i40e_device_mutex); |
| return ret; |
| } |
| |
| /** |
| * i40e_lan_del_device - removes a lan device from the device list |
| * @pf: pointer to the board struct |
| * |
| * Returns 0 on success or non-0 on error |
| **/ |
| int i40e_lan_del_device(struct i40e_pf *pf) |
| { |
| struct i40e_device *ldev, *tmp; |
| int ret = -ENODEV; |
| |
| /* First, remove any client instance. */ |
| i40e_client_del_instance(pf); |
| |
| mutex_lock(&i40e_device_mutex); |
| list_for_each_entry_safe(ldev, tmp, &i40e_devices, list) { |
| if (ldev->pf == pf) { |
| dev_info(&pf->pdev->dev, "Deleted LAN device PF%d bus=0x%02x dev=0x%02x func=0x%02x\n", |
| pf->hw.pf_id, pf->hw.bus.bus_id, |
| pf->hw.bus.device, pf->hw.bus.func); |
| list_del(&ldev->list); |
| kfree(ldev); |
| ret = 0; |
| break; |
| } |
| } |
| mutex_unlock(&i40e_device_mutex); |
| return ret; |
| } |
| |
| /** |
| * i40e_client_release - release client specific resources |
| * @client: pointer to the registered client |
| * |
| **/ |
| static void i40e_client_release(struct i40e_client *client) |
| { |
| struct i40e_client_instance *cdev; |
| struct i40e_device *ldev; |
| struct i40e_pf *pf; |
| |
| mutex_lock(&i40e_device_mutex); |
| list_for_each_entry(ldev, &i40e_devices, list) { |
| pf = ldev->pf; |
| cdev = pf->cinst; |
| if (!cdev) |
| continue; |
| |
| while (test_and_set_bit(__I40E_SERVICE_SCHED, |
| pf->state)) |
| usleep_range(500, 1000); |
| |
| if (test_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state)) { |
| if (client->ops && client->ops->close) |
| client->ops->close(&cdev->lan_info, client, |
| false); |
| i40e_client_release_qvlist(&cdev->lan_info); |
| clear_bit(__I40E_CLIENT_INSTANCE_OPENED, &cdev->state); |
| |
| dev_warn(&pf->pdev->dev, |
| "Client %s instance for PF id %d closed\n", |
| client->name, pf->hw.pf_id); |
| } |
| /* delete the client instance */ |
| i40e_client_del_instance(pf); |
| dev_info(&pf->pdev->dev, "Deleted client instance of Client %s\n", |
| client->name); |
| clear_bit(__I40E_SERVICE_SCHED, pf->state); |
| } |
| mutex_unlock(&i40e_device_mutex); |
| } |
| |
| /** |
| * i40e_client_prepare - prepare client specific resources |
| * @client: pointer to the registered client |
| * |
| **/ |
| static void i40e_client_prepare(struct i40e_client *client) |
| { |
| struct i40e_device *ldev; |
| struct i40e_pf *pf; |
| |
| mutex_lock(&i40e_device_mutex); |
| list_for_each_entry(ldev, &i40e_devices, list) { |
| pf = ldev->pf; |
| i40e_client_add_instance(pf); |
| /* Start the client subtask */ |
| set_bit(__I40E_CLIENT_SERVICE_REQUESTED, pf->state); |
| i40e_service_event_schedule(pf); |
| } |
| mutex_unlock(&i40e_device_mutex); |
| } |
| |
| /** |
| * i40e_client_virtchnl_send - TBD |
| * @ldev: pointer to L2 context |
| * @client: Client pointer |
| * @vf_id: absolute VF identifier |
| * @msg: message buffer |
| * @len: length of message buffer |
| * |
| * Return 0 on success or < 0 on error |
| **/ |
| static int i40e_client_virtchnl_send(struct i40e_info *ldev, |
| struct i40e_client *client, |
| u32 vf_id, u8 *msg, u16 len) |
| { |
| struct i40e_pf *pf = ldev->pf; |
| struct i40e_hw *hw = &pf->hw; |
| i40e_status err; |
| |
| err = i40e_aq_send_msg_to_vf(hw, vf_id, VIRTCHNL_OP_IWARP, |
| 0, msg, len, NULL); |
| if (err) |
| dev_err(&pf->pdev->dev, "Unable to send iWarp message to VF, error %d, aq status %d\n", |
| err, hw->aq.asq_last_status); |
| |
| return err; |
| } |
| |
| /** |
| * i40e_client_setup_qvlist |
| * @ldev: pointer to L2 context. |
| * @client: Client pointer. |
| * @qvlist_info: queue and vector list |
| * |
| * Return 0 on success or < 0 on error |
| **/ |
| static int i40e_client_setup_qvlist(struct i40e_info *ldev, |
| struct i40e_client *client, |
| struct i40e_qvlist_info *qvlist_info) |
| { |
| struct i40e_pf *pf = ldev->pf; |
| struct i40e_hw *hw = &pf->hw; |
| struct i40e_qv_info *qv_info; |
| u32 v_idx, i, reg_idx, reg; |
| |
| ldev->qvlist_info = kzalloc(struct_size(ldev->qvlist_info, qv_info, |
| qvlist_info->num_vectors - 1), GFP_KERNEL); |
| if (!ldev->qvlist_info) |
| return -ENOMEM; |
| ldev->qvlist_info->num_vectors = qvlist_info->num_vectors; |
| |
| for (i = 0; i < qvlist_info->num_vectors; i++) { |
| qv_info = &qvlist_info->qv_info[i]; |
| if (!qv_info) |
| continue; |
| v_idx = qv_info->v_idx; |
| |
| /* Validate vector id belongs to this client */ |
| if ((v_idx >= (pf->iwarp_base_vector + pf->num_iwarp_msix)) || |
| (v_idx < pf->iwarp_base_vector)) |
| goto err; |
| |
| ldev->qvlist_info->qv_info[i] = *qv_info; |
| reg_idx = I40E_PFINT_LNKLSTN(v_idx - 1); |
| |
| if (qv_info->ceq_idx == I40E_QUEUE_INVALID_IDX) { |
| /* Special case - No CEQ mapped on this vector */ |
| wr32(hw, reg_idx, I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK); |
| } else { |
| reg = (qv_info->ceq_idx & |
| I40E_PFINT_LNKLSTN_FIRSTQ_INDX_MASK) | |
| (I40E_QUEUE_TYPE_PE_CEQ << |
| I40E_PFINT_LNKLSTN_FIRSTQ_TYPE_SHIFT); |
| wr32(hw, reg_idx, reg); |
| |
| reg = (I40E_PFINT_CEQCTL_CAUSE_ENA_MASK | |
| (v_idx << I40E_PFINT_CEQCTL_MSIX_INDX_SHIFT) | |
| (qv_info->itr_idx << |
| I40E_PFINT_CEQCTL_ITR_INDX_SHIFT) | |
| (I40E_QUEUE_END_OF_LIST << |
| I40E_PFINT_CEQCTL_NEXTQ_INDX_SHIFT)); |
| wr32(hw, I40E_PFINT_CEQCTL(qv_info->ceq_idx), reg); |
| } |
| if (qv_info->aeq_idx != I40E_QUEUE_INVALID_IDX) { |
| reg = (I40E_PFINT_AEQCTL_CAUSE_ENA_MASK | |
| (v_idx << I40E_PFINT_AEQCTL_MSIX_INDX_SHIFT) | |
| (qv_info->itr_idx << |
| I40E_PFINT_AEQCTL_ITR_INDX_SHIFT)); |
| |
| wr32(hw, I40E_PFINT_AEQCTL, reg); |
| } |
| } |
| /* Mitigate sync problems with iwarp VF driver */ |
| i40e_flush(hw); |
| return 0; |
| err: |
| kfree(ldev->qvlist_info); |
| ldev->qvlist_info = NULL; |
| return -EINVAL; |
| } |
| |
| /** |
| * i40e_client_request_reset |
| * @ldev: pointer to L2 context. |
| * @client: Client pointer. |
| * @reset_level: reset level |
| **/ |
| static void i40e_client_request_reset(struct i40e_info *ldev, |
| struct i40e_client *client, |
| u32 reset_level) |
| { |
| struct i40e_pf *pf = ldev->pf; |
| |
| switch (reset_level) { |
| case I40E_CLIENT_RESET_LEVEL_PF: |
| set_bit(__I40E_PF_RESET_REQUESTED, pf->state); |
| break; |
| case I40E_CLIENT_RESET_LEVEL_CORE: |
| set_bit(__I40E_PF_RESET_REQUESTED, pf->state); |
| break; |
| default: |
| dev_warn(&pf->pdev->dev, |
| "Client for PF id %d requested an unsupported reset: %d.\n", |
| pf->hw.pf_id, reset_level); |
| break; |
| } |
| |
| i40e_service_event_schedule(pf); |
| } |
| |
| /** |
| * i40e_client_update_vsi_ctxt |
| * @ldev: pointer to L2 context. |
| * @client: Client pointer. |
| * @is_vf: if this for the VF |
| * @vf_id: if is_vf true this carries the vf_id |
| * @flag: Any device level setting that needs to be done for PE |
| * @valid_flag: Bits in this match up and enable changing of flag bits |
| * |
| * Return 0 on success or < 0 on error |
| **/ |
| static int i40e_client_update_vsi_ctxt(struct i40e_info *ldev, |
| struct i40e_client *client, |
| bool is_vf, u32 vf_id, |
| u32 flag, u32 valid_flag) |
| { |
| struct i40e_pf *pf = ldev->pf; |
| struct i40e_vsi *vsi = pf->vsi[pf->lan_vsi]; |
| struct i40e_vsi_context ctxt; |
| bool update = true; |
| i40e_status err; |
| |
| /* TODO: for now do not allow setting VF's VSI setting */ |
| if (is_vf) |
| return -EINVAL; |
| |
| ctxt.seid = pf->main_vsi_seid; |
| ctxt.pf_num = pf->hw.pf_id; |
| err = i40e_aq_get_vsi_params(&pf->hw, &ctxt, NULL); |
| ctxt.flags = I40E_AQ_VSI_TYPE_PF; |
| if (err) { |
| dev_info(&pf->pdev->dev, |
| "couldn't get PF vsi config, err %s aq_err %s\n", |
| i40e_stat_str(&pf->hw, err), |
| i40e_aq_str(&pf->hw, |
| pf->hw.aq.asq_last_status)); |
| return -ENOENT; |
| } |
| |
| if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE) && |
| (flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE)) { |
| ctxt.info.valid_sections = |
| cpu_to_le16(I40E_AQ_VSI_PROP_QUEUE_OPT_VALID); |
| ctxt.info.queueing_opt_flags |= I40E_AQ_VSI_QUE_OPT_TCP_ENA; |
| } else if ((valid_flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE) && |
| !(flag & I40E_CLIENT_VSI_FLAG_TCP_ENABLE)) { |
| ctxt.info.valid_sections = |
| cpu_to_le16(I40E_AQ_VSI_PROP_QUEUE_OPT_VALID); |
| ctxt.info.queueing_opt_flags &= ~I40E_AQ_VSI_QUE_OPT_TCP_ENA; |
| } else { |
| update = false; |
| dev_warn(&pf->pdev->dev, |
| "Client for PF id %d request an unsupported Config: %x.\n", |
| pf->hw.pf_id, flag); |
| } |
| |
| if (update) { |
| err = i40e_aq_update_vsi_params(&vsi->back->hw, &ctxt, NULL); |
| if (err) { |
| dev_info(&pf->pdev->dev, |
| "update VSI ctxt for PE failed, err %s aq_err %s\n", |
| i40e_stat_str(&pf->hw, err), |
| i40e_aq_str(&pf->hw, |
| pf->hw.aq.asq_last_status)); |
| } |
| } |
| return err; |
| } |
| |
| /** |
| * i40e_register_client - Register a i40e client driver with the L2 driver |
| * @client: pointer to the i40e_client struct |
| * |
| * Returns 0 on success or non-0 on error |
| **/ |
| int i40e_register_client(struct i40e_client *client) |
| { |
| int ret = 0; |
| |
| if (!client) { |
| ret = -EIO; |
| goto out; |
| } |
| |
| if (strlen(client->name) == 0) { |
| pr_info("i40e: Failed to register client with no name\n"); |
| ret = -EIO; |
| goto out; |
| } |
| |
| if (registered_client) { |
| pr_info("i40e: Client %s has already been registered!\n", |
| client->name); |
| ret = -EEXIST; |
| goto out; |
| } |
| |
| if ((client->version.major != I40E_CLIENT_VERSION_MAJOR) || |
| (client->version.minor != I40E_CLIENT_VERSION_MINOR)) { |
| pr_info("i40e: Failed to register client %s due to mismatched client interface version\n", |
| client->name); |
| pr_info("Client is using version: %02d.%02d.%02d while LAN driver supports %s\n", |
| client->version.major, client->version.minor, |
| client->version.build, |
| i40e_client_interface_version_str); |
| ret = -EIO; |
| goto out; |
| } |
| |
| registered_client = client; |
| |
| i40e_client_prepare(client); |
| |
| pr_info("i40e: Registered client %s\n", client->name); |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(i40e_register_client); |
| |
| /** |
| * i40e_unregister_client - Unregister a i40e client driver with the L2 driver |
| * @client: pointer to the i40e_client struct |
| * |
| * Returns 0 on success or non-0 on error |
| **/ |
| int i40e_unregister_client(struct i40e_client *client) |
| { |
| int ret = 0; |
| |
| if (registered_client != client) { |
| pr_info("i40e: Client %s has not been registered\n", |
| client->name); |
| ret = -ENODEV; |
| goto out; |
| } |
| registered_client = NULL; |
| /* When a unregister request comes through we would have to send |
| * a close for each of the client instances that were opened. |
| * client_release function is called to handle this. |
| */ |
| i40e_client_release(client); |
| |
| pr_info("i40e: Unregistered client %s\n", client->name); |
| out: |
| return ret; |
| } |
| EXPORT_SYMBOL(i40e_unregister_client); |