| // SPDX-License-Identifier: GPL-2.0-only |
| /* |
| * Copyright (C) 2014-2015 The Linux Foundation. All rights reserved. |
| * Copyright (C) 2013 Red Hat |
| * Author: Rob Clark <robdclark@gmail.com> |
| */ |
| |
| #include <drm/drm_atomic.h> |
| #include <drm/drm_blend.h> |
| #include <drm/drm_damage_helper.h> |
| #include <drm/drm_fourcc.h> |
| #include <drm/drm_framebuffer.h> |
| #include <drm/drm_gem_atomic_helper.h> |
| #include <drm/drm_print.h> |
| |
| #include "mdp5_kms.h" |
| |
| struct mdp5_plane { |
| struct drm_plane base; |
| |
| uint32_t nformats; |
| uint32_t formats[32]; |
| }; |
| #define to_mdp5_plane(x) container_of(x, struct mdp5_plane, base) |
| |
| static int mdp5_plane_mode_set(struct drm_plane *plane, |
| struct drm_crtc *crtc, struct drm_framebuffer *fb, |
| struct drm_rect *src, struct drm_rect *dest); |
| |
| static struct mdp5_kms *get_kms(struct drm_plane *plane) |
| { |
| struct msm_drm_private *priv = plane->dev->dev_private; |
| return to_mdp5_kms(to_mdp_kms(priv->kms)); |
| } |
| |
| static bool plane_enabled(struct drm_plane_state *state) |
| { |
| return state->visible; |
| } |
| |
| static void mdp5_plane_destroy(struct drm_plane *plane) |
| { |
| struct mdp5_plane *mdp5_plane = to_mdp5_plane(plane); |
| |
| drm_plane_cleanup(plane); |
| |
| kfree(mdp5_plane); |
| } |
| |
| /* helper to install properties which are common to planes and crtcs */ |
| static void mdp5_plane_install_properties(struct drm_plane *plane, |
| struct drm_mode_object *obj) |
| { |
| unsigned int zpos; |
| |
| drm_plane_create_rotation_property(plane, |
| DRM_MODE_ROTATE_0, |
| DRM_MODE_ROTATE_0 | |
| DRM_MODE_ROTATE_180 | |
| DRM_MODE_REFLECT_X | |
| DRM_MODE_REFLECT_Y); |
| drm_plane_create_alpha_property(plane); |
| drm_plane_create_blend_mode_property(plane, |
| BIT(DRM_MODE_BLEND_PIXEL_NONE) | |
| BIT(DRM_MODE_BLEND_PREMULTI) | |
| BIT(DRM_MODE_BLEND_COVERAGE)); |
| |
| if (plane->type == DRM_PLANE_TYPE_PRIMARY) |
| zpos = STAGE_BASE; |
| else |
| zpos = STAGE0 + drm_plane_index(plane); |
| drm_plane_create_zpos_property(plane, zpos, 1, 255); |
| } |
| |
| static void |
| mdp5_plane_atomic_print_state(struct drm_printer *p, |
| const struct drm_plane_state *state) |
| { |
| struct mdp5_plane_state *pstate = to_mdp5_plane_state(state); |
| struct mdp5_kms *mdp5_kms = get_kms(state->plane); |
| |
| drm_printf(p, "\thwpipe=%s\n", pstate->hwpipe ? |
| pstate->hwpipe->name : "(null)"); |
| if (mdp5_kms->caps & MDP_CAP_SRC_SPLIT) |
| drm_printf(p, "\tright-hwpipe=%s\n", |
| pstate->r_hwpipe ? pstate->r_hwpipe->name : |
| "(null)"); |
| drm_printf(p, "\tblend_mode=%u\n", pstate->base.pixel_blend_mode); |
| drm_printf(p, "\tzpos=%u\n", pstate->base.zpos); |
| drm_printf(p, "\tnormalized_zpos=%u\n", pstate->base.normalized_zpos); |
| drm_printf(p, "\talpha=%u\n", pstate->base.alpha); |
| drm_printf(p, "\tstage=%s\n", stage2name(pstate->stage)); |
| } |
| |
| static void mdp5_plane_reset(struct drm_plane *plane) |
| { |
| struct mdp5_plane_state *mdp5_state; |
| |
| if (plane->state) |
| __drm_atomic_helper_plane_destroy_state(plane->state); |
| |
| kfree(to_mdp5_plane_state(plane->state)); |
| plane->state = NULL; |
| mdp5_state = kzalloc(sizeof(*mdp5_state), GFP_KERNEL); |
| if (!mdp5_state) |
| return; |
| __drm_atomic_helper_plane_reset(plane, &mdp5_state->base); |
| } |
| |
| static struct drm_plane_state * |
| mdp5_plane_duplicate_state(struct drm_plane *plane) |
| { |
| struct mdp5_plane_state *mdp5_state; |
| |
| if (WARN_ON(!plane->state)) |
| return NULL; |
| |
| mdp5_state = kmemdup(to_mdp5_plane_state(plane->state), |
| sizeof(*mdp5_state), GFP_KERNEL); |
| if (!mdp5_state) |
| return NULL; |
| |
| __drm_atomic_helper_plane_duplicate_state(plane, &mdp5_state->base); |
| |
| return &mdp5_state->base; |
| } |
| |
| static void mdp5_plane_destroy_state(struct drm_plane *plane, |
| struct drm_plane_state *state) |
| { |
| struct mdp5_plane_state *pstate = to_mdp5_plane_state(state); |
| |
| __drm_atomic_helper_plane_destroy_state(state); |
| |
| kfree(pstate); |
| } |
| |
| static const struct drm_plane_funcs mdp5_plane_funcs = { |
| .update_plane = drm_atomic_helper_update_plane, |
| .disable_plane = drm_atomic_helper_disable_plane, |
| .destroy = mdp5_plane_destroy, |
| .reset = mdp5_plane_reset, |
| .atomic_duplicate_state = mdp5_plane_duplicate_state, |
| .atomic_destroy_state = mdp5_plane_destroy_state, |
| .atomic_print_state = mdp5_plane_atomic_print_state, |
| }; |
| |
| static int mdp5_plane_prepare_fb(struct drm_plane *plane, |
| struct drm_plane_state *new_state) |
| { |
| struct msm_drm_private *priv = plane->dev->dev_private; |
| struct msm_kms *kms = priv->kms; |
| bool needs_dirtyfb = to_mdp5_plane_state(new_state)->needs_dirtyfb; |
| |
| if (!new_state->fb) |
| return 0; |
| |
| drm_gem_plane_helper_prepare_fb(plane, new_state); |
| |
| return msm_framebuffer_prepare(new_state->fb, kms->aspace, needs_dirtyfb); |
| } |
| |
| static void mdp5_plane_cleanup_fb(struct drm_plane *plane, |
| struct drm_plane_state *old_state) |
| { |
| struct mdp5_kms *mdp5_kms = get_kms(plane); |
| struct msm_kms *kms = &mdp5_kms->base.base; |
| struct drm_framebuffer *fb = old_state->fb; |
| bool needed_dirtyfb = to_mdp5_plane_state(old_state)->needs_dirtyfb; |
| |
| if (!fb) |
| return; |
| |
| DBG("%s: cleanup: FB[%u]", plane->name, fb->base.id); |
| msm_framebuffer_cleanup(fb, kms->aspace, needed_dirtyfb); |
| } |
| |
| static int mdp5_plane_atomic_check_with_state(struct drm_crtc_state *crtc_state, |
| struct drm_plane_state *state) |
| { |
| struct mdp5_plane_state *mdp5_state = to_mdp5_plane_state(state); |
| struct drm_plane *plane = state->plane; |
| struct drm_plane_state *old_state = plane->state; |
| struct mdp5_cfg *config = mdp5_cfg_get_config(get_kms(plane)->cfg); |
| bool new_hwpipe = false; |
| bool need_right_hwpipe = false; |
| uint32_t max_width, max_height; |
| bool out_of_bounds = false; |
| uint32_t caps = 0; |
| int min_scale, max_scale; |
| int ret; |
| |
| DBG("%s: check (%d -> %d)", plane->name, |
| plane_enabled(old_state), plane_enabled(state)); |
| |
| max_width = config->hw->lm.max_width << 16; |
| max_height = config->hw->lm.max_height << 16; |
| |
| /* Make sure source dimensions are within bounds. */ |
| if (state->src_h > max_height) |
| out_of_bounds = true; |
| |
| if (state->src_w > max_width) { |
| /* If source split is supported, we can go up to 2x |
| * the max LM width, but we'd need to stage another |
| * hwpipe to the right LM. So, the drm_plane would |
| * consist of 2 hwpipes. |
| */ |
| if (config->hw->mdp.caps & MDP_CAP_SRC_SPLIT && |
| (state->src_w <= 2 * max_width)) |
| need_right_hwpipe = true; |
| else |
| out_of_bounds = true; |
| } |
| |
| if (out_of_bounds) { |
| struct drm_rect src = drm_plane_state_src(state); |
| DBG("Invalid source size "DRM_RECT_FP_FMT, |
| DRM_RECT_FP_ARG(&src)); |
| return -ERANGE; |
| } |
| |
| min_scale = FRAC_16_16(1, 8); |
| max_scale = FRAC_16_16(8, 1); |
| |
| ret = drm_atomic_helper_check_plane_state(state, crtc_state, |
| min_scale, max_scale, |
| true, true); |
| if (ret) |
| return ret; |
| |
| if (plane_enabled(state)) { |
| unsigned int rotation; |
| const struct mdp_format *format; |
| struct mdp5_kms *mdp5_kms = get_kms(plane); |
| uint32_t blkcfg = 0; |
| |
| format = to_mdp_format(msm_framebuffer_format(state->fb)); |
| if (MDP_FORMAT_IS_YUV(format)) |
| caps |= MDP_PIPE_CAP_SCALE | MDP_PIPE_CAP_CSC; |
| |
| if (((state->src_w >> 16) != state->crtc_w) || |
| ((state->src_h >> 16) != state->crtc_h)) |
| caps |= MDP_PIPE_CAP_SCALE; |
| |
| rotation = drm_rotation_simplify(state->rotation, |
| DRM_MODE_ROTATE_0 | |
| DRM_MODE_REFLECT_X | |
| DRM_MODE_REFLECT_Y); |
| |
| if (rotation & DRM_MODE_REFLECT_X) |
| caps |= MDP_PIPE_CAP_HFLIP; |
| |
| if (rotation & DRM_MODE_REFLECT_Y) |
| caps |= MDP_PIPE_CAP_VFLIP; |
| |
| if (plane->type == DRM_PLANE_TYPE_CURSOR) |
| caps |= MDP_PIPE_CAP_CURSOR; |
| |
| /* (re)allocate hw pipe if we don't have one or caps-mismatch: */ |
| if (!mdp5_state->hwpipe || (caps & ~mdp5_state->hwpipe->caps)) |
| new_hwpipe = true; |
| |
| /* |
| * (re)allocte hw pipe if we're either requesting for 2 hw pipes |
| * or we're switching from 2 hw pipes to 1 hw pipe because the |
| * new src_w can be supported by 1 hw pipe itself. |
| */ |
| if ((need_right_hwpipe && !mdp5_state->r_hwpipe) || |
| (!need_right_hwpipe && mdp5_state->r_hwpipe)) |
| new_hwpipe = true; |
| |
| if (mdp5_kms->smp) { |
| const struct mdp_format *format = |
| to_mdp_format(msm_framebuffer_format(state->fb)); |
| |
| blkcfg = mdp5_smp_calculate(mdp5_kms->smp, format, |
| state->src_w >> 16, false); |
| |
| if (mdp5_state->hwpipe && (mdp5_state->hwpipe->blkcfg != blkcfg)) |
| new_hwpipe = true; |
| } |
| |
| /* (re)assign hwpipe if needed, otherwise keep old one: */ |
| if (new_hwpipe) { |
| /* TODO maybe we want to re-assign hwpipe sometimes |
| * in cases when we no-longer need some caps to make |
| * it available for other planes? |
| */ |
| struct mdp5_hw_pipe *old_hwpipe = mdp5_state->hwpipe; |
| struct mdp5_hw_pipe *old_right_hwpipe = |
| mdp5_state->r_hwpipe; |
| struct mdp5_hw_pipe *new_hwpipe = NULL; |
| struct mdp5_hw_pipe *new_right_hwpipe = NULL; |
| |
| ret = mdp5_pipe_assign(state->state, plane, caps, |
| blkcfg, &new_hwpipe, |
| need_right_hwpipe ? |
| &new_right_hwpipe : NULL); |
| if (ret) { |
| DBG("%s: failed to assign hwpipe(s)!", |
| plane->name); |
| return ret; |
| } |
| |
| mdp5_state->hwpipe = new_hwpipe; |
| if (need_right_hwpipe) |
| mdp5_state->r_hwpipe = new_right_hwpipe; |
| else |
| /* |
| * set it to NULL so that the driver knows we |
| * don't have a right hwpipe when committing a |
| * new state |
| */ |
| mdp5_state->r_hwpipe = NULL; |
| |
| |
| ret = mdp5_pipe_release(state->state, old_hwpipe); |
| if (ret) |
| return ret; |
| |
| ret = mdp5_pipe_release(state->state, old_right_hwpipe); |
| if (ret) |
| return ret; |
| |
| } |
| } else { |
| ret = mdp5_pipe_release(state->state, mdp5_state->hwpipe); |
| if (ret) |
| return ret; |
| |
| ret = mdp5_pipe_release(state->state, mdp5_state->r_hwpipe); |
| if (ret) |
| return ret; |
| |
| mdp5_state->hwpipe = mdp5_state->r_hwpipe = NULL; |
| } |
| |
| return 0; |
| } |
| |
| static int mdp5_plane_atomic_check(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *old_plane_state = drm_atomic_get_old_plane_state(state, |
| plane); |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| struct drm_crtc *crtc; |
| struct drm_crtc_state *crtc_state; |
| |
| crtc = new_plane_state->crtc ? new_plane_state->crtc : old_plane_state->crtc; |
| if (!crtc) |
| return 0; |
| |
| crtc_state = drm_atomic_get_existing_crtc_state(state, |
| crtc); |
| if (WARN_ON(!crtc_state)) |
| return -EINVAL; |
| |
| return mdp5_plane_atomic_check_with_state(crtc_state, new_plane_state); |
| } |
| |
| static void mdp5_plane_atomic_update(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| |
| DBG("%s: update", plane->name); |
| |
| if (plane_enabled(new_state)) { |
| int ret; |
| |
| ret = mdp5_plane_mode_set(plane, |
| new_state->crtc, new_state->fb, |
| &new_state->src, &new_state->dst); |
| /* atomic_check should have ensured that this doesn't fail */ |
| WARN_ON(ret < 0); |
| } |
| } |
| |
| static int mdp5_plane_atomic_async_check(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| struct mdp5_plane_state *mdp5_state = to_mdp5_plane_state(new_plane_state); |
| struct drm_crtc_state *crtc_state; |
| int min_scale, max_scale; |
| int ret; |
| |
| crtc_state = drm_atomic_get_existing_crtc_state(state, |
| new_plane_state->crtc); |
| if (WARN_ON(!crtc_state)) |
| return -EINVAL; |
| |
| if (!crtc_state->active) |
| return -EINVAL; |
| |
| /* don't use fast path if we don't have a hwpipe allocated yet */ |
| if (!mdp5_state->hwpipe) |
| return -EINVAL; |
| |
| /* only allow changing of position(crtc x/y or src x/y) in fast path */ |
| if (plane->state->crtc != new_plane_state->crtc || |
| plane->state->src_w != new_plane_state->src_w || |
| plane->state->src_h != new_plane_state->src_h || |
| plane->state->crtc_w != new_plane_state->crtc_w || |
| plane->state->crtc_h != new_plane_state->crtc_h || |
| !plane->state->fb || |
| plane->state->fb != new_plane_state->fb) |
| return -EINVAL; |
| |
| min_scale = FRAC_16_16(1, 8); |
| max_scale = FRAC_16_16(8, 1); |
| |
| ret = drm_atomic_helper_check_plane_state(new_plane_state, crtc_state, |
| min_scale, max_scale, |
| true, true); |
| if (ret) |
| return ret; |
| |
| /* |
| * if the visibility of the plane changes (i.e, if the cursor is |
| * clipped out completely, we can't take the async path because |
| * we need to stage/unstage the plane from the Layer Mixer(s). We |
| * also assign/unassign the hwpipe(s) tied to the plane. We avoid |
| * taking the fast path for both these reasons. |
| */ |
| if (new_plane_state->visible != plane->state->visible) |
| return -EINVAL; |
| |
| return 0; |
| } |
| |
| static void mdp5_plane_atomic_async_update(struct drm_plane *plane, |
| struct drm_atomic_state *state) |
| { |
| struct drm_plane_state *new_state = drm_atomic_get_new_plane_state(state, |
| plane); |
| struct drm_framebuffer *old_fb = plane->state->fb; |
| |
| plane->state->src_x = new_state->src_x; |
| plane->state->src_y = new_state->src_y; |
| plane->state->crtc_x = new_state->crtc_x; |
| plane->state->crtc_y = new_state->crtc_y; |
| |
| if (plane_enabled(new_state)) { |
| struct mdp5_ctl *ctl; |
| struct mdp5_pipeline *pipeline = |
| mdp5_crtc_get_pipeline(new_state->crtc); |
| int ret; |
| |
| ret = mdp5_plane_mode_set(plane, new_state->crtc, new_state->fb, |
| &new_state->src, &new_state->dst); |
| WARN_ON(ret < 0); |
| |
| ctl = mdp5_crtc_get_ctl(new_state->crtc); |
| |
| mdp5_ctl_commit(ctl, pipeline, mdp5_plane_get_flush(plane), true); |
| } |
| |
| *to_mdp5_plane_state(plane->state) = |
| *to_mdp5_plane_state(new_state); |
| |
| new_state->fb = old_fb; |
| } |
| |
| static const struct drm_plane_helper_funcs mdp5_plane_helper_funcs = { |
| .prepare_fb = mdp5_plane_prepare_fb, |
| .cleanup_fb = mdp5_plane_cleanup_fb, |
| .atomic_check = mdp5_plane_atomic_check, |
| .atomic_update = mdp5_plane_atomic_update, |
| .atomic_async_check = mdp5_plane_atomic_async_check, |
| .atomic_async_update = mdp5_plane_atomic_async_update, |
| }; |
| |
| static void set_scanout_locked(struct mdp5_kms *mdp5_kms, |
| enum mdp5_pipe pipe, |
| struct drm_framebuffer *fb) |
| { |
| struct msm_kms *kms = &mdp5_kms->base.base; |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC_STRIDE_A(pipe), |
| MDP5_PIPE_SRC_STRIDE_A_P0(fb->pitches[0]) | |
| MDP5_PIPE_SRC_STRIDE_A_P1(fb->pitches[1])); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC_STRIDE_B(pipe), |
| MDP5_PIPE_SRC_STRIDE_B_P2(fb->pitches[2]) | |
| MDP5_PIPE_SRC_STRIDE_B_P3(fb->pitches[3])); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC0_ADDR(pipe), |
| msm_framebuffer_iova(fb, kms->aspace, 0)); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC1_ADDR(pipe), |
| msm_framebuffer_iova(fb, kms->aspace, 1)); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC2_ADDR(pipe), |
| msm_framebuffer_iova(fb, kms->aspace, 2)); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC3_ADDR(pipe), |
| msm_framebuffer_iova(fb, kms->aspace, 3)); |
| } |
| |
| /* Note: mdp5_plane->pipe_lock must be locked */ |
| static void csc_disable(struct mdp5_kms *mdp5_kms, enum mdp5_pipe pipe) |
| { |
| uint32_t value = mdp5_read(mdp5_kms, REG_MDP5_PIPE_OP_MODE(pipe)) & |
| ~MDP5_PIPE_OP_MODE_CSC_1_EN; |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_OP_MODE(pipe), value); |
| } |
| |
| /* Note: mdp5_plane->pipe_lock must be locked */ |
| static void csc_enable(struct mdp5_kms *mdp5_kms, enum mdp5_pipe pipe, |
| struct csc_cfg *csc) |
| { |
| uint32_t i, mode = 0; /* RGB, no CSC */ |
| uint32_t *matrix; |
| |
| if (unlikely(!csc)) |
| return; |
| |
| if ((csc->type == CSC_YUV2RGB) || (CSC_YUV2YUV == csc->type)) |
| mode |= MDP5_PIPE_OP_MODE_CSC_SRC_DATA_FORMAT(DATA_FORMAT_YUV); |
| if ((csc->type == CSC_RGB2YUV) || (CSC_YUV2YUV == csc->type)) |
| mode |= MDP5_PIPE_OP_MODE_CSC_DST_DATA_FORMAT(DATA_FORMAT_YUV); |
| mode |= MDP5_PIPE_OP_MODE_CSC_1_EN; |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_OP_MODE(pipe), mode); |
| |
| matrix = csc->matrix; |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_CSC_1_MATRIX_COEFF_0(pipe), |
| MDP5_PIPE_CSC_1_MATRIX_COEFF_0_COEFF_11(matrix[0]) | |
| MDP5_PIPE_CSC_1_MATRIX_COEFF_0_COEFF_12(matrix[1])); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_CSC_1_MATRIX_COEFF_1(pipe), |
| MDP5_PIPE_CSC_1_MATRIX_COEFF_1_COEFF_13(matrix[2]) | |
| MDP5_PIPE_CSC_1_MATRIX_COEFF_1_COEFF_21(matrix[3])); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_CSC_1_MATRIX_COEFF_2(pipe), |
| MDP5_PIPE_CSC_1_MATRIX_COEFF_2_COEFF_22(matrix[4]) | |
| MDP5_PIPE_CSC_1_MATRIX_COEFF_2_COEFF_23(matrix[5])); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_CSC_1_MATRIX_COEFF_3(pipe), |
| MDP5_PIPE_CSC_1_MATRIX_COEFF_3_COEFF_31(matrix[6]) | |
| MDP5_PIPE_CSC_1_MATRIX_COEFF_3_COEFF_32(matrix[7])); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_CSC_1_MATRIX_COEFF_4(pipe), |
| MDP5_PIPE_CSC_1_MATRIX_COEFF_4_COEFF_33(matrix[8])); |
| |
| for (i = 0; i < ARRAY_SIZE(csc->pre_bias); i++) { |
| uint32_t *pre_clamp = csc->pre_clamp; |
| uint32_t *post_clamp = csc->post_clamp; |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_CSC_1_PRE_CLAMP(pipe, i), |
| MDP5_PIPE_CSC_1_PRE_CLAMP_REG_HIGH(pre_clamp[2*i+1]) | |
| MDP5_PIPE_CSC_1_PRE_CLAMP_REG_LOW(pre_clamp[2*i])); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_CSC_1_POST_CLAMP(pipe, i), |
| MDP5_PIPE_CSC_1_POST_CLAMP_REG_HIGH(post_clamp[2*i+1]) | |
| MDP5_PIPE_CSC_1_POST_CLAMP_REG_LOW(post_clamp[2*i])); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_CSC_1_PRE_BIAS(pipe, i), |
| MDP5_PIPE_CSC_1_PRE_BIAS_REG_VALUE(csc->pre_bias[i])); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_CSC_1_POST_BIAS(pipe, i), |
| MDP5_PIPE_CSC_1_POST_BIAS_REG_VALUE(csc->post_bias[i])); |
| } |
| } |
| |
| #define PHASE_STEP_SHIFT 21 |
| #define DOWN_SCALE_RATIO_MAX 32 /* 2^(26-21) */ |
| |
| static int calc_phase_step(uint32_t src, uint32_t dst, uint32_t *out_phase) |
| { |
| uint32_t unit; |
| |
| if (src == 0 || dst == 0) |
| return -EINVAL; |
| |
| /* |
| * PHASE_STEP_X/Y is coded on 26 bits (25:0), |
| * where 2^21 represents the unity "1" in fixed-point hardware design. |
| * This leaves 5 bits for the integer part (downscale case): |
| * -> maximum downscale ratio = 0b1_1111 = 31 |
| */ |
| if (src > (dst * DOWN_SCALE_RATIO_MAX)) |
| return -EOVERFLOW; |
| |
| unit = 1 << PHASE_STEP_SHIFT; |
| *out_phase = mult_frac(unit, src, dst); |
| |
| return 0; |
| } |
| |
| static int calc_scalex_steps(struct drm_plane *plane, |
| uint32_t pixel_format, uint32_t src, uint32_t dest, |
| uint32_t phasex_steps[COMP_MAX]) |
| { |
| const struct drm_format_info *info = drm_format_info(pixel_format); |
| struct mdp5_kms *mdp5_kms = get_kms(plane); |
| struct device *dev = mdp5_kms->dev->dev; |
| uint32_t phasex_step; |
| int ret; |
| |
| ret = calc_phase_step(src, dest, &phasex_step); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "X scaling (%d->%d) failed: %d\n", src, dest, ret); |
| return ret; |
| } |
| |
| phasex_steps[COMP_0] = phasex_step; |
| phasex_steps[COMP_3] = phasex_step; |
| phasex_steps[COMP_1_2] = phasex_step / info->hsub; |
| |
| return 0; |
| } |
| |
| static int calc_scaley_steps(struct drm_plane *plane, |
| uint32_t pixel_format, uint32_t src, uint32_t dest, |
| uint32_t phasey_steps[COMP_MAX]) |
| { |
| const struct drm_format_info *info = drm_format_info(pixel_format); |
| struct mdp5_kms *mdp5_kms = get_kms(plane); |
| struct device *dev = mdp5_kms->dev->dev; |
| uint32_t phasey_step; |
| int ret; |
| |
| ret = calc_phase_step(src, dest, &phasey_step); |
| if (ret) { |
| DRM_DEV_ERROR(dev, "Y scaling (%d->%d) failed: %d\n", src, dest, ret); |
| return ret; |
| } |
| |
| phasey_steps[COMP_0] = phasey_step; |
| phasey_steps[COMP_3] = phasey_step; |
| phasey_steps[COMP_1_2] = phasey_step / info->vsub; |
| |
| return 0; |
| } |
| |
| static uint32_t get_scale_config(const struct mdp_format *format, |
| uint32_t src, uint32_t dst, bool horz) |
| { |
| const struct drm_format_info *info = drm_format_info(format->base.pixel_format); |
| bool scaling = format->is_yuv ? true : (src != dst); |
| uint32_t sub; |
| uint32_t ya_filter, uv_filter; |
| bool yuv = format->is_yuv; |
| |
| if (!scaling) |
| return 0; |
| |
| if (yuv) { |
| sub = horz ? info->hsub : info->vsub; |
| uv_filter = ((src / sub) <= dst) ? |
| SCALE_FILTER_BIL : SCALE_FILTER_PCMN; |
| } |
| ya_filter = (src <= dst) ? SCALE_FILTER_BIL : SCALE_FILTER_PCMN; |
| |
| if (horz) |
| return MDP5_PIPE_SCALE_CONFIG_SCALEX_EN | |
| MDP5_PIPE_SCALE_CONFIG_SCALEX_FILTER_COMP_0(ya_filter) | |
| MDP5_PIPE_SCALE_CONFIG_SCALEX_FILTER_COMP_3(ya_filter) | |
| COND(yuv, MDP5_PIPE_SCALE_CONFIG_SCALEX_FILTER_COMP_1_2(uv_filter)); |
| else |
| return MDP5_PIPE_SCALE_CONFIG_SCALEY_EN | |
| MDP5_PIPE_SCALE_CONFIG_SCALEY_FILTER_COMP_0(ya_filter) | |
| MDP5_PIPE_SCALE_CONFIG_SCALEY_FILTER_COMP_3(ya_filter) | |
| COND(yuv, MDP5_PIPE_SCALE_CONFIG_SCALEY_FILTER_COMP_1_2(uv_filter)); |
| } |
| |
| static void calc_pixel_ext(const struct mdp_format *format, |
| uint32_t src, uint32_t dst, uint32_t phase_step[2], |
| int pix_ext_edge1[COMP_MAX], int pix_ext_edge2[COMP_MAX], |
| bool horz) |
| { |
| bool scaling = format->is_yuv ? true : (src != dst); |
| int i; |
| |
| /* |
| * Note: |
| * We assume here that: |
| * 1. PCMN filter is used for downscale |
| * 2. bilinear filter is used for upscale |
| * 3. we are in a single pipe configuration |
| */ |
| |
| for (i = 0; i < COMP_MAX; i++) { |
| pix_ext_edge1[i] = 0; |
| pix_ext_edge2[i] = scaling ? 1 : 0; |
| } |
| } |
| |
| static void mdp5_write_pixel_ext(struct mdp5_kms *mdp5_kms, enum mdp5_pipe pipe, |
| const struct mdp_format *format, |
| uint32_t src_w, int pe_left[COMP_MAX], int pe_right[COMP_MAX], |
| uint32_t src_h, int pe_top[COMP_MAX], int pe_bottom[COMP_MAX]) |
| { |
| const struct drm_format_info *info = drm_format_info(format->base.pixel_format); |
| uint32_t lr, tb, req; |
| int i; |
| |
| for (i = 0; i < COMP_MAX; i++) { |
| uint32_t roi_w = src_w; |
| uint32_t roi_h = src_h; |
| |
| if (format->is_yuv && i == COMP_1_2) { |
| roi_w /= info->hsub; |
| roi_h /= info->vsub; |
| } |
| |
| lr = (pe_left[i] >= 0) ? |
| MDP5_PIPE_SW_PIX_EXT_LR_LEFT_RPT(pe_left[i]) : |
| MDP5_PIPE_SW_PIX_EXT_LR_LEFT_OVF(pe_left[i]); |
| |
| lr |= (pe_right[i] >= 0) ? |
| MDP5_PIPE_SW_PIX_EXT_LR_RIGHT_RPT(pe_right[i]) : |
| MDP5_PIPE_SW_PIX_EXT_LR_RIGHT_OVF(pe_right[i]); |
| |
| tb = (pe_top[i] >= 0) ? |
| MDP5_PIPE_SW_PIX_EXT_TB_TOP_RPT(pe_top[i]) : |
| MDP5_PIPE_SW_PIX_EXT_TB_TOP_OVF(pe_top[i]); |
| |
| tb |= (pe_bottom[i] >= 0) ? |
| MDP5_PIPE_SW_PIX_EXT_TB_BOTTOM_RPT(pe_bottom[i]) : |
| MDP5_PIPE_SW_PIX_EXT_TB_BOTTOM_OVF(pe_bottom[i]); |
| |
| req = MDP5_PIPE_SW_PIX_EXT_REQ_PIXELS_LEFT_RIGHT(roi_w + |
| pe_left[i] + pe_right[i]); |
| |
| req |= MDP5_PIPE_SW_PIX_EXT_REQ_PIXELS_TOP_BOTTOM(roi_h + |
| pe_top[i] + pe_bottom[i]); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SW_PIX_EXT_LR(pipe, i), lr); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SW_PIX_EXT_TB(pipe, i), tb); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SW_PIX_EXT_REQ_PIXELS(pipe, i), req); |
| |
| DBG("comp-%d (L/R): rpt=%d/%d, ovf=%d/%d, req=%d", i, |
| FIELD(lr, MDP5_PIPE_SW_PIX_EXT_LR_LEFT_RPT), |
| FIELD(lr, MDP5_PIPE_SW_PIX_EXT_LR_RIGHT_RPT), |
| FIELD(lr, MDP5_PIPE_SW_PIX_EXT_LR_LEFT_OVF), |
| FIELD(lr, MDP5_PIPE_SW_PIX_EXT_LR_RIGHT_OVF), |
| FIELD(req, MDP5_PIPE_SW_PIX_EXT_REQ_PIXELS_LEFT_RIGHT)); |
| |
| DBG("comp-%d (T/B): rpt=%d/%d, ovf=%d/%d, req=%d", i, |
| FIELD(tb, MDP5_PIPE_SW_PIX_EXT_TB_TOP_RPT), |
| FIELD(tb, MDP5_PIPE_SW_PIX_EXT_TB_BOTTOM_RPT), |
| FIELD(tb, MDP5_PIPE_SW_PIX_EXT_TB_TOP_OVF), |
| FIELD(tb, MDP5_PIPE_SW_PIX_EXT_TB_BOTTOM_OVF), |
| FIELD(req, MDP5_PIPE_SW_PIX_EXT_REQ_PIXELS_TOP_BOTTOM)); |
| } |
| } |
| |
| struct pixel_ext { |
| int left[COMP_MAX]; |
| int right[COMP_MAX]; |
| int top[COMP_MAX]; |
| int bottom[COMP_MAX]; |
| }; |
| |
| struct phase_step { |
| u32 x[COMP_MAX]; |
| u32 y[COMP_MAX]; |
| }; |
| |
| static void mdp5_hwpipe_mode_set(struct mdp5_kms *mdp5_kms, |
| struct mdp5_hw_pipe *hwpipe, |
| struct drm_framebuffer *fb, |
| struct phase_step *step, |
| struct pixel_ext *pe, |
| u32 scale_config, u32 hdecm, u32 vdecm, |
| bool hflip, bool vflip, |
| int crtc_x, int crtc_y, |
| unsigned int crtc_w, unsigned int crtc_h, |
| u32 src_img_w, u32 src_img_h, |
| u32 src_x, u32 src_y, |
| u32 src_w, u32 src_h) |
| { |
| enum mdp5_pipe pipe = hwpipe->pipe; |
| bool has_pe = hwpipe->caps & MDP_PIPE_CAP_SW_PIX_EXT; |
| const struct mdp_format *format = |
| to_mdp_format(msm_framebuffer_format(fb)); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC_IMG_SIZE(pipe), |
| MDP5_PIPE_SRC_IMG_SIZE_WIDTH(src_img_w) | |
| MDP5_PIPE_SRC_IMG_SIZE_HEIGHT(src_img_h)); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC_SIZE(pipe), |
| MDP5_PIPE_SRC_SIZE_WIDTH(src_w) | |
| MDP5_PIPE_SRC_SIZE_HEIGHT(src_h)); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC_XY(pipe), |
| MDP5_PIPE_SRC_XY_X(src_x) | |
| MDP5_PIPE_SRC_XY_Y(src_y)); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_OUT_SIZE(pipe), |
| MDP5_PIPE_OUT_SIZE_WIDTH(crtc_w) | |
| MDP5_PIPE_OUT_SIZE_HEIGHT(crtc_h)); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_OUT_XY(pipe), |
| MDP5_PIPE_OUT_XY_X(crtc_x) | |
| MDP5_PIPE_OUT_XY_Y(crtc_y)); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC_FORMAT(pipe), |
| MDP5_PIPE_SRC_FORMAT_A_BPC(format->bpc_a) | |
| MDP5_PIPE_SRC_FORMAT_R_BPC(format->bpc_r) | |
| MDP5_PIPE_SRC_FORMAT_G_BPC(format->bpc_g) | |
| MDP5_PIPE_SRC_FORMAT_B_BPC(format->bpc_b) | |
| COND(format->alpha_enable, MDP5_PIPE_SRC_FORMAT_ALPHA_ENABLE) | |
| MDP5_PIPE_SRC_FORMAT_CPP(format->cpp - 1) | |
| MDP5_PIPE_SRC_FORMAT_UNPACK_COUNT(format->unpack_count - 1) | |
| COND(format->unpack_tight, MDP5_PIPE_SRC_FORMAT_UNPACK_TIGHT) | |
| MDP5_PIPE_SRC_FORMAT_FETCH_TYPE(format->fetch_type) | |
| MDP5_PIPE_SRC_FORMAT_CHROMA_SAMP(format->chroma_sample)); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC_UNPACK(pipe), |
| MDP5_PIPE_SRC_UNPACK_ELEM0(format->unpack[0]) | |
| MDP5_PIPE_SRC_UNPACK_ELEM1(format->unpack[1]) | |
| MDP5_PIPE_SRC_UNPACK_ELEM2(format->unpack[2]) | |
| MDP5_PIPE_SRC_UNPACK_ELEM3(format->unpack[3])); |
| |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC_OP_MODE(pipe), |
| (hflip ? MDP5_PIPE_SRC_OP_MODE_FLIP_LR : 0) | |
| (vflip ? MDP5_PIPE_SRC_OP_MODE_FLIP_UD : 0) | |
| COND(has_pe, MDP5_PIPE_SRC_OP_MODE_SW_PIX_EXT_OVERRIDE) | |
| MDP5_PIPE_SRC_OP_MODE_BWC(BWC_LOSSLESS)); |
| |
| /* not using secure mode: */ |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SRC_ADDR_SW_STATUS(pipe), 0); |
| |
| if (hwpipe->caps & MDP_PIPE_CAP_SW_PIX_EXT) |
| mdp5_write_pixel_ext(mdp5_kms, pipe, format, |
| src_w, pe->left, pe->right, |
| src_h, pe->top, pe->bottom); |
| |
| if (hwpipe->caps & MDP_PIPE_CAP_SCALE) { |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SCALE_PHASE_STEP_X(pipe), |
| step->x[COMP_0]); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SCALE_PHASE_STEP_Y(pipe), |
| step->y[COMP_0]); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SCALE_CR_PHASE_STEP_X(pipe), |
| step->x[COMP_1_2]); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SCALE_CR_PHASE_STEP_Y(pipe), |
| step->y[COMP_1_2]); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_DECIMATION(pipe), |
| MDP5_PIPE_DECIMATION_VERT(vdecm) | |
| MDP5_PIPE_DECIMATION_HORZ(hdecm)); |
| mdp5_write(mdp5_kms, REG_MDP5_PIPE_SCALE_CONFIG(pipe), |
| scale_config); |
| } |
| |
| if (hwpipe->caps & MDP_PIPE_CAP_CSC) { |
| if (MDP_FORMAT_IS_YUV(format)) |
| csc_enable(mdp5_kms, pipe, |
| mdp_get_default_csc_cfg(CSC_YUV2RGB)); |
| else |
| csc_disable(mdp5_kms, pipe); |
| } |
| |
| set_scanout_locked(mdp5_kms, pipe, fb); |
| } |
| |
| static int mdp5_plane_mode_set(struct drm_plane *plane, |
| struct drm_crtc *crtc, struct drm_framebuffer *fb, |
| struct drm_rect *src, struct drm_rect *dest) |
| { |
| struct drm_plane_state *pstate = plane->state; |
| struct mdp5_hw_pipe *hwpipe = to_mdp5_plane_state(pstate)->hwpipe; |
| struct mdp5_kms *mdp5_kms = get_kms(plane); |
| enum mdp5_pipe pipe = hwpipe->pipe; |
| struct mdp5_hw_pipe *right_hwpipe; |
| const struct mdp_format *format; |
| uint32_t nplanes, config = 0; |
| struct phase_step step = { { 0 } }; |
| struct pixel_ext pe = { { 0 } }; |
| uint32_t hdecm = 0, vdecm = 0; |
| uint32_t pix_format; |
| unsigned int rotation; |
| bool vflip, hflip; |
| int crtc_x, crtc_y; |
| unsigned int crtc_w, crtc_h; |
| uint32_t src_x, src_y; |
| uint32_t src_w, src_h; |
| uint32_t src_img_w, src_img_h; |
| int ret; |
| |
| nplanes = fb->format->num_planes; |
| |
| /* bad formats should already be rejected: */ |
| if (WARN_ON(nplanes > pipe2nclients(pipe))) |
| return -EINVAL; |
| |
| format = to_mdp_format(msm_framebuffer_format(fb)); |
| pix_format = format->base.pixel_format; |
| |
| src_x = src->x1; |
| src_y = src->y1; |
| src_w = drm_rect_width(src); |
| src_h = drm_rect_height(src); |
| |
| crtc_x = dest->x1; |
| crtc_y = dest->y1; |
| crtc_w = drm_rect_width(dest); |
| crtc_h = drm_rect_height(dest); |
| |
| /* src values are in Q16 fixed point, convert to integer: */ |
| src_x = src_x >> 16; |
| src_y = src_y >> 16; |
| src_w = src_w >> 16; |
| src_h = src_h >> 16; |
| |
| src_img_w = min(fb->width, src_w); |
| src_img_h = min(fb->height, src_h); |
| |
| DBG("%s: FB[%u] %u,%u,%u,%u -> CRTC[%u] %d,%d,%u,%u", plane->name, |
| fb->base.id, src_x, src_y, src_w, src_h, |
| crtc->base.id, crtc_x, crtc_y, crtc_w, crtc_h); |
| |
| right_hwpipe = to_mdp5_plane_state(pstate)->r_hwpipe; |
| if (right_hwpipe) { |
| /* |
| * if the plane comprises of 2 hw pipes, assume that the width |
| * is split equally across them. The only parameters that varies |
| * between the 2 pipes are src_x and crtc_x |
| */ |
| crtc_w /= 2; |
| src_w /= 2; |
| src_img_w /= 2; |
| } |
| |
| ret = calc_scalex_steps(plane, pix_format, src_w, crtc_w, step.x); |
| if (ret) |
| return ret; |
| |
| ret = calc_scaley_steps(plane, pix_format, src_h, crtc_h, step.y); |
| if (ret) |
| return ret; |
| |
| if (hwpipe->caps & MDP_PIPE_CAP_SW_PIX_EXT) { |
| calc_pixel_ext(format, src_w, crtc_w, step.x, |
| pe.left, pe.right, true); |
| calc_pixel_ext(format, src_h, crtc_h, step.y, |
| pe.top, pe.bottom, false); |
| } |
| |
| /* TODO calc hdecm, vdecm */ |
| |
| /* SCALE is used to both scale and up-sample chroma components */ |
| config |= get_scale_config(format, src_w, crtc_w, true); |
| config |= get_scale_config(format, src_h, crtc_h, false); |
| DBG("scale config = %x", config); |
| |
| rotation = drm_rotation_simplify(pstate->rotation, |
| DRM_MODE_ROTATE_0 | |
| DRM_MODE_REFLECT_X | |
| DRM_MODE_REFLECT_Y); |
| hflip = !!(rotation & DRM_MODE_REFLECT_X); |
| vflip = !!(rotation & DRM_MODE_REFLECT_Y); |
| |
| mdp5_hwpipe_mode_set(mdp5_kms, hwpipe, fb, &step, &pe, |
| config, hdecm, vdecm, hflip, vflip, |
| crtc_x, crtc_y, crtc_w, crtc_h, |
| src_img_w, src_img_h, |
| src_x, src_y, src_w, src_h); |
| if (right_hwpipe) |
| mdp5_hwpipe_mode_set(mdp5_kms, right_hwpipe, fb, &step, &pe, |
| config, hdecm, vdecm, hflip, vflip, |
| crtc_x + crtc_w, crtc_y, crtc_w, crtc_h, |
| src_img_w, src_img_h, |
| src_x + src_w, src_y, src_w, src_h); |
| |
| return ret; |
| } |
| |
| /* |
| * Use this func and the one below only after the atomic state has been |
| * successfully swapped |
| */ |
| enum mdp5_pipe mdp5_plane_pipe(struct drm_plane *plane) |
| { |
| struct mdp5_plane_state *pstate = to_mdp5_plane_state(plane->state); |
| |
| if (WARN_ON(!pstate->hwpipe)) |
| return SSPP_NONE; |
| |
| return pstate->hwpipe->pipe; |
| } |
| |
| enum mdp5_pipe mdp5_plane_right_pipe(struct drm_plane *plane) |
| { |
| struct mdp5_plane_state *pstate = to_mdp5_plane_state(plane->state); |
| |
| if (!pstate->r_hwpipe) |
| return SSPP_NONE; |
| |
| return pstate->r_hwpipe->pipe; |
| } |
| |
| uint32_t mdp5_plane_get_flush(struct drm_plane *plane) |
| { |
| struct mdp5_plane_state *pstate = to_mdp5_plane_state(plane->state); |
| u32 mask; |
| |
| if (WARN_ON(!pstate->hwpipe)) |
| return 0; |
| |
| mask = pstate->hwpipe->flush_mask; |
| |
| if (pstate->r_hwpipe) |
| mask |= pstate->r_hwpipe->flush_mask; |
| |
| return mask; |
| } |
| |
| /* initialize plane */ |
| struct drm_plane *mdp5_plane_init(struct drm_device *dev, |
| enum drm_plane_type type) |
| { |
| struct drm_plane *plane = NULL; |
| struct mdp5_plane *mdp5_plane; |
| int ret; |
| |
| mdp5_plane = kzalloc(sizeof(*mdp5_plane), GFP_KERNEL); |
| if (!mdp5_plane) { |
| ret = -ENOMEM; |
| goto fail; |
| } |
| |
| plane = &mdp5_plane->base; |
| |
| mdp5_plane->nformats = mdp_get_formats(mdp5_plane->formats, |
| ARRAY_SIZE(mdp5_plane->formats), false); |
| |
| ret = drm_universal_plane_init(dev, plane, 0xff, &mdp5_plane_funcs, |
| mdp5_plane->formats, mdp5_plane->nformats, |
| NULL, type, NULL); |
| if (ret) |
| goto fail; |
| |
| drm_plane_helper_add(plane, &mdp5_plane_helper_funcs); |
| |
| mdp5_plane_install_properties(plane, &plane->base); |
| |
| drm_plane_enable_fb_damage_clips(plane); |
| |
| return plane; |
| |
| fail: |
| if (plane) |
| mdp5_plane_destroy(plane); |
| |
| return ERR_PTR(ret); |
| } |